1
0
mirror of https://pagure.io/fedora-qa/os-autoinst-distri-fedora.git synced 2024-12-05 03:23:09 +00:00
os-autoinst-distri-fedora/tests/_boot_to_anaconda.pm
Adam Williamson fc93309b41 Drop _assert_and_click shim
We're on newer code on both deployments now, no longer needed.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-01-10 14:22:20 -08:00

176 lines
7.5 KiB
Perl

use base "anacondatest";
use strict;
use lockapi;
use testapi;
use utils;
use tapnet;
use anaconda;
sub run {
my $self = shift;
if (get_var("PXEBOOT")) {
# PXE tests have DELAYED_START set, so VM is not running yet,
# because if we boot immediately PXE will time out waiting for
# DHCP before the support server is ready. So we wait here for
# support server to be ready, then go ahead and start the VM
mutex_lock "support_ready";
mutex_unlock "support_ready";
resume_vm;
}
# construct the kernel params. the trick here is to wind up with
# spaced params if GRUB or GRUBADD is set, and just spaces if not,
# then check if we got all spaces. We wind up with a harmless
# extra space if GRUBADD is set but GRUB is not.
my $params = "";
$params .= get_var("GRUB", "") . " ";
$params .= get_var("GRUBADD", "") . " ";
# Construct inst.repo arg for REPOSITORY_VARIATION
my $repourl = get_var("REPOSITORY_VARIATION");
if ($repourl) {
$params .= "inst.repo=" . get_full_repo($repourl) . " ";
}
# Construct inst.addrepo arg for ADD_REPOSITORY_VARIATION
my $repourl = get_var("ADD_REPOSITORY_VARIATION");
if ($repourl) {
$params .= "inst.addrepo=addrepo," . get_full_repo($repourl) . " ";
}
if (get_var("ANACONDA_TEXT")) {
$params .= "inst.text ";
# we need this on aarch64 till #1594402 is resolved,
# and we also can utilize this if we want to run this
# over the serial console.
$params .= "console=tty0 " if (get_var("ARCH") eq "aarch64");
# when the text installation should run over the serial console,
# we have to add some more parametres to grub. Although, the written
# test case recommends using ttyS0, OpenQA only uses that console for
# displaying information but does not accept key strokes. Therefore,
# let us use a real virtio console here.
if (get_var("SERIAL_CONSOLE")) {
# this is icky. on ppc64 (OFW), virtio-console is hvc1 and
# virtio-console1 is hvc2, because the 'standard' serial
# terminal is hvc0 (the firmware does this or something).
# On other arches, the 'standard' serial terminal is ttyS0,
# so virtio-console becomes hvc0 and virtio-console1 is
# hvc1. We want anaconda to wind up on the console that is
# virtio-console1 in both cases
if (get_var("OFW")) {
$params .= "console=hvc2 ";
}
else {
$params .= "console=hvc1 ";
}
}
}
# inst.debug enables memory use tracking
$params .= "debug" if get_var("MEMCHECK");
# ternary: set $params to "" if it contains only spaces
$params = $params =~ /^\s+$/ ? "" : $params;
# set mutex wait if necessary
my $mutex = get_var("INSTALL_UNLOCK");
# we need a longer timeout for the PXE boot test
my $timeout = 30;
$timeout = 120 if (get_var("PXEBOOT"));
# call do_bootloader with postinstall=0, the params, and the mutex,
# unless we're a VNC install client (no bootloader there)
unless (get_var("VNC_CLIENT")) {
do_bootloader(postinstall=>0, params=>$params, mutex=>$mutex, timeout=>$timeout);
}
# Read variables for identification tests (see further).
my $identification = get_var('IDENTIFICATION');
# proceed to installer
if (get_var("KICKSTART") || get_var("VNC_SERVER")) {
# wait for the bootloader *here* - in a test that inherits from
# anacondatest - so that if something goes wrong during install,
# we get anaconda logs. sleep a bit first so we don't get a
# match for the installer bootloader if it hangs around for a
# while after do_bootloader finishes (in PXE case it does)
sleep 20;
assert_screen "bootloader", 1800;
}
else {
if (get_var("ANACONDA_TEXT")) {
# select that we don't want to start VNC; we want to run in text mode
if (get_var("SERIAL_CONSOLE")) {
# we direct the installer to virtio-console1, and use
# virtio-console as a root console
select_console('virtio-console1');
unless (wait_serial "Use text mode", timeout=>120) { die "Anaconda has not started."; }
type_string "2\n";
unless (wait_serial "Installation") { die "Text version of Anaconda has not started."; }
}
else {
assert_screen "anaconda_use_text_mode", 300;
type_string "2\n";
# wait for text version of Anaconda main hub
assert_screen "anaconda_main_hub_text", 300;
}
}
else {
# on lives, we have to explicitly launch anaconda
if (get_var('LIVE')) {
assert_and_click("live_start_anaconda_icon", timeout=>300);
unless (check_screen "anaconda_select_install_lang", 180) {
# click it again - on KDE since 2019-10 or so it seems
# like the first attempt sometimes just doesn't work
assert_and_click("live_start_anaconda_icon", timeout=>300);
}
}
my $language = get_var('LANGUAGE') || 'english';
# wait for anaconda to appear; we click to work around
# RHBZ #1566066 if it happens
assert_and_click("anaconda_select_install_lang", timeout=>300);
# Select install language
wait_screen_change { assert_and_click "anaconda_select_install_lang_input"; };
type_safely $language;
# Needle filtering in main.pm ensures we will only look for the
# appropriate language, here
assert_and_click "anaconda_select_install_lang_filtered";
assert_screen "anaconda_select_install_lang_selected", 10;
assert_and_click "anaconda_select_install_lang_continue";
# wait 180 secs for hub or Rawhide warning dialog to appear
# (per https://bugzilla.redhat.com/show_bug.cgi?id=1666112
# the nag screen can take a LONG time to appear sometimes).
# If the hub appears, return - we're done now. If Rawhide
# warning dialog appears, accept it.
if (check_screen ["anaconda_rawhide_accept_fate", "anaconda_main_hub"], 180) {
if (match_has_tag("anaconda_rawhide_accept_fate")) {
assert_and_click "anaconda_rawhide_accept_fate";
}
else {
# this is when the hub appeared already, we're done
return;
}
}
# If we want to test self identification, in the test suite
# we set "identification" to "true".
# Here, we will watch for the graphical elements in Anaconda main hub.
my $branched = get_var('VERSION');
if ($identification eq 'true' or $branched ne "Rawhide") {
check_left_bar(); # See utils.pm
check_prerelease();
check_version();
}
# This is where we get to if we accepted fate above, *or*
# didn't match anything: if the Rawhide warning didn't
# show by now it never will, so we'll just wait for the
# hub to show up.
assert_screen "anaconda_main_hub", 900; #
}
}
}
sub test_flags {
return { fatal => 1 };
}
1;
# vim: set sw=4 et: