mirror of
https://pagure.io/fedora-qa/os-autoinst-distri-fedora.git
synced 2024-12-01 17:53:08 +00:00
de2c44e7ae
It seems like the situation where we need to pull an update from updates-testing into all update tests to work around some known issue is going to keep happening. So instead of constantly adding and then entirely removing bespoke lines for each specific workaround, let's have a permanent mechanism for doing this: a hash with release numbers as keys, and arrayrefs of update IDs as values, and a block to call `bodhi updates download` on the appropriate array for the release under test. This way, to add or remove a workaround you just update the hash. If we're at a point where *no* workarounds are needed the %workarounds hash can be made entirely empty (it must exist, though) and the code will be a clean no-op. The actual workaround here pulls in Lmod updates I just sent out to work around this issue in one of the KDE update tests: https://openqa.fedoraproject.org/tests/497160#step/base_update_cli/11 there's some code in Lmod that gets sourced in bash profiles which breaks openQA's `validate_script_output` by blurping two lines of informational output into the output of the script. The update backports a change from upstream Lmod master that sends that informational output to stderr instead of stdout. Signed-off-by: Adam Williamson <awilliam@redhat.com>
1205 lines
48 KiB
Perl
1205 lines
48 KiB
Perl
package utils;
|
|
|
|
use strict;
|
|
|
|
use base 'Exporter';
|
|
use Exporter;
|
|
|
|
use lockapi;
|
|
use testapi;
|
|
our @EXPORT = qw/run_with_error_check type_safely type_very_safely desktop_vt boot_to_login_screen console_login console_switch_layout desktop_switch_layout console_loadkeys_us do_bootloader boot_decrypt check_release menu_launch_type repo_setup gnome_initial_setup anaconda_create_user check_desktop_clean download_modularity_tests quit_firefox advisory_get_installed_packages advisory_check_nonmatching_packages start_with_launcher quit_with_shortcut lo_dismiss_tip disable_firefox_studies select_rescue_mode copy_devcdrom_as_isofile bypass_1691487 get_release_number check_left_bar check_top_bar check_prerelease check_version spell_version_number _assert_and_click is_branched rec_log click_unwanted_notifications repos_mirrorlist register_application get_registered_applications/;
|
|
|
|
# We introduce this global variable to hold the list of applications that have
|
|
# registered during the apps_startstop_test when they have sucessfully run.
|
|
our @application_list;
|
|
|
|
sub run_with_error_check {
|
|
my ($func, $error_screen) = @_;
|
|
# Check screen does not work for serial console, so we need to use
|
|
# different checking mechanism for it.
|
|
if (testapi::is_serial_terminal) {
|
|
# by using 'unless' and 'expect_not_found=>1' here we avoid
|
|
# the web UI showing each failure to see the error message as
|
|
# a 'failed match'
|
|
die "Error screen appeared" unless (wait_serial($error_screen, timeout=>5, expect_not_found=>1));
|
|
$func->();
|
|
die "Error screen appeared" unless (wait_serial($error_screen, timeout=>5, expect_not_found=>1));
|
|
}
|
|
else {
|
|
die "Error screen appeared" if (check_screen $error_screen, 5);
|
|
$func->();
|
|
die "Error screen appeared" if (check_screen $error_screen, 5);
|
|
}
|
|
}
|
|
|
|
# high-level 'type this string quite safely but reasonably fast'
|
|
# function whose specific implementation may vary
|
|
sub type_safely {
|
|
my $string = shift;
|
|
type_string($string, wait_screen_change => 3, max_interval => 20);
|
|
# similarity level 45 as there will commonly be a flashing
|
|
# cursor and the default level (47) is slightly too tight
|
|
wait_still_screen(stilltime=>2, similarity_level=>45);
|
|
}
|
|
|
|
# high-level 'type this string extremely safely and rather slow'
|
|
# function whose specific implementation may vary
|
|
sub type_very_safely {
|
|
my $string = shift;
|
|
type_string($string, wait_screen_change => 1, max_interval => 1);
|
|
# similarity level 45 as there will commonly be a flashing
|
|
# cursor and the default level (47) is slightly too tight
|
|
wait_still_screen(stilltime=>5, similarity_level=>45);
|
|
}
|
|
|
|
# Figure out what tty the desktop is on, switch to it. Assumes we're
|
|
# at a root console
|
|
sub desktop_vt {
|
|
# use loginctl or ps to find the tty of test's session (loginctl)
|
|
# or Xwayland or Xorg (ps); as of 2019-09 on F31 update tests
|
|
# ps -C is giving 'tty?', so adding loginctl works around that
|
|
my $xout;
|
|
# don't fail test if we don't find any process, just guess tty1
|
|
eval { $xout = script_output ' loginctl | grep test; ps -C Xwayland,Xorg -o tty --no-headers'; };
|
|
my $tty = 1; # default
|
|
while ($xout =~ /tty(\d)/g) {
|
|
$tty = $1; # most recent match is probably best
|
|
}
|
|
send_key "ctrl-alt-f${tty}";
|
|
# work around https://gitlab.gnome.org/GNOME/gnome-software/issues/582
|
|
# if it happens. As of 2019-05, seeing something similar on KDE too
|
|
my $desktop = get_var('DESKTOP');
|
|
if (check_screen "auth_required", 10) {
|
|
record_soft_failure "spurious 'auth required' - https://gitlab.gnome.org/GNOME/gnome-software/issues/582";
|
|
assert_and_click "auth_required" if ($desktop eq 'kde');
|
|
# bit sloppy but correct for both...
|
|
type_very_safely "weakpassword\n";
|
|
# as of 2019-04 when we hit this bug it seems to ask for
|
|
# auth *twice*, so handle that
|
|
sleep 3;
|
|
if (check_screen "auth_required", 1) {
|
|
type_very_safely "weakpassword\n";
|
|
}
|
|
}
|
|
}
|
|
|
|
# Wait for login screen to appear. Handle the annoying GPU buffer
|
|
# problem where we see a stale copy of the login screen from the
|
|
# previous boot. Will suffer a ~30 second delay if there's a chance
|
|
# we're *already at* the expected login screen.
|
|
sub boot_to_login_screen {
|
|
my %args = @_;
|
|
$args{timeout} //= 300;
|
|
if (testapi::is_serial_terminal) {
|
|
# For serial console, just wait for the login prompt
|
|
unless (wait_serial "login:", timeout=>$args{timeout}) {
|
|
die "No login prompt shown on serial console.";
|
|
}
|
|
}
|
|
else {
|
|
# we may start at a screen that matches one of the needles; if so,
|
|
# wait till we don't (e.g. when rebooting at end of live install,
|
|
# we match text_console_login until the console disappears).
|
|
# The following is true for non-serial console.
|
|
my $count = 5;
|
|
while (check_screen("login_screen", 3) && $count > 0) {
|
|
sleep 5;
|
|
$count -= 1;
|
|
}
|
|
assert_screen "login_screen", $args{timeout};
|
|
if (match_has_tag "graphical_login") {
|
|
wait_still_screen 10, 30;
|
|
assert_screen "login_screen";
|
|
}
|
|
}
|
|
}
|
|
|
|
# Switch keyboard layouts at a console
|
|
sub console_switch_layout {
|
|
# switcher key combo differs between layouts, for console
|
|
if (get_var("LANGUAGE", "") eq "russian") {
|
|
send_key "ctrl-shift";
|
|
}
|
|
}
|
|
|
|
# switch to 'native' or 'ascii' input method in a graphical desktop
|
|
# usually switched configs have one mode for inputting ascii-ish
|
|
# characters (which may be 'us' keyboard layout, or a local layout for
|
|
# inputting ascii like 'jp') and one mode for inputting native
|
|
# characters (which may be another keyboard layout, like 'ru', or an
|
|
# input method for more complex languages)
|
|
# 'environment' can be a desktop name or 'anaconda' for anaconda
|
|
# if not set, will use get_var('DESKTOP') or default 'anaconda'
|
|
sub desktop_switch_layout {
|
|
my ($layout, $environment) = @_;
|
|
$layout //= 'ascii';
|
|
$environment //= get_var("DESKTOP", "anaconda");
|
|
# if already selected, we're good
|
|
return if (check_screen "${environment}_layout_${layout}", 3);
|
|
# otherwise we need to switch
|
|
my $switcher = "alt-shift"; # anaconda
|
|
$switcher = "super-spc" if $environment eq 'gnome';
|
|
# KDE? not used yet
|
|
send_key $switcher;
|
|
assert_screen "${environment}_layout_${layout}", 3;
|
|
}
|
|
|
|
# this is used at the end of console_login to check if we got a prompt
|
|
# indicating that we got a bash shell, but sourcing of /etc/bashrc
|
|
# failed (the prompt looks different in this case). We treat this as
|
|
# a soft failure.
|
|
sub _console_login_finish {
|
|
# The check differs according to the console used.
|
|
if (testapi::is_serial_terminal) {
|
|
unless (wait_serial("-bash-.*[#\$]", timeout=>5, expect_not_found=>1)) {
|
|
record_soft_failure "It looks like profile sourcing failed";
|
|
}
|
|
}
|
|
else {
|
|
if (match_has_tag "bash_noprofile") {
|
|
record_soft_failure "It looks like profile sourcing failed";
|
|
}
|
|
}
|
|
}
|
|
|
|
# this subroutine handles logging in as a root/specified user into console
|
|
# it requires TTY to be already displayed (handled by the root_console()
|
|
# method of distribution classes)
|
|
sub console_login {
|
|
my %args = (
|
|
user => "root",
|
|
password => get_var("ROOT_PASSWORD", "weakpassword"),
|
|
# default is 10 seconds, set below, 0 means 'default'
|
|
timeout => 0,
|
|
@_);
|
|
$args{timeout} ||= 10;
|
|
|
|
# Since we do not test many serial console tests, and we probably
|
|
# only want to test serial console on a minimal installation only,
|
|
# let us not do all the magic to handle different console logins
|
|
# and let us simplify the process.
|
|
# We will check if we are logged in, and if so, we will log out to
|
|
# enable a new proper login based on the user variable.
|
|
if (get_var("SERIAL_CONSOLE")) {
|
|
# Check for the usual prompt.
|
|
if (wait_serial("~\][#\$]", timeout=>5, quiet=>1)) {
|
|
type_string "logout\n";
|
|
# Wait a bit to let the logout properly finish.
|
|
sleep 10;
|
|
}
|
|
# Do the new login.
|
|
type_string $args{user};
|
|
type_string "\n";
|
|
sleep 2;
|
|
type_string $args{password};
|
|
type_string "\n";
|
|
# Let's perform a simple login test. This is the same as
|
|
# whoami, but has the advantage of existing in installer env
|
|
assert_script_run "id -un";
|
|
unless (wait_serial $args{user}, timeout=>5) {
|
|
die "Logging onto the serial console has failed.";
|
|
}
|
|
}
|
|
else {
|
|
# There's a timing problem when we switch from a logged-in console
|
|
# to a non-logged in console and immediately call this function;
|
|
# if the switch lags a bit, this function will match one of the
|
|
# logged-in needles for the console we switched from, and get out
|
|
# of sync (e.g. https://openqa.stg.fedoraproject.org/tests/1664 )
|
|
# To avoid this, we'll sleep a few seconds before starting
|
|
sleep 4;
|
|
|
|
my $good = "";
|
|
my $bad = "";
|
|
if ($args{user} eq "root") {
|
|
$good = "root_console";
|
|
$bad = "user_console";
|
|
}
|
|
else {
|
|
$good = "user_console";
|
|
$bad = "root_console";
|
|
}
|
|
|
|
if (check_screen $bad, 0) {
|
|
# we don't want to 'wait' for this as it won't return
|
|
script_run "exit", 0;
|
|
sleep 2;
|
|
}
|
|
|
|
assert_screen [$good, 'text_console_login'], $args{timeout};
|
|
# if we're already logged in, all is good
|
|
if (match_has_tag $good) {
|
|
_console_login_finish();
|
|
return;
|
|
}
|
|
# otherwise, we saw the login prompt, type the username
|
|
type_string("$args{user}\n");
|
|
assert_screen [$good, 'console_password_required'], 30;
|
|
# on a live image, just the user name will be enough
|
|
if (match_has_tag $good) {
|
|
# clear the screen (so the remaining login prompt text doesn't
|
|
# confuse subsequent runs of this)
|
|
type_string "clear\n";
|
|
_console_login_finish();
|
|
return;
|
|
}
|
|
# otherwise, type the password
|
|
type_string "$args{password}";
|
|
if (get_var("SWITCHED_LAYOUT") and $args{user} ne "root") {
|
|
# see _do_install_and_reboot; when layout is switched
|
|
# user password is doubled to contain both US and native
|
|
# chars
|
|
console_switch_layout;
|
|
type_string "$args{password}";
|
|
console_switch_layout;
|
|
}
|
|
send_key "ret";
|
|
# make sure we reached the console
|
|
unless (check_screen($good, 30)) {
|
|
# as of 2018-10 we have a bug in sssd which makes this take
|
|
# unusually long in the FreeIPA tests, let's allow longer,
|
|
# with a soft fail - RHBZ #1644919
|
|
record_soft_failure "Console login is taking a long time - #1644919?";
|
|
my $timeout = 30;
|
|
# even an extra 30 secs isn't long enough on aarch64...
|
|
$timeout = 90 if (get_var("ARCH") eq "aarch64");
|
|
assert_screen($good, $timeout);
|
|
}
|
|
# clear the screen (so the remaining login prompt text doesn't
|
|
# confuse subsequent runs of this)
|
|
type_string "clear\n";
|
|
}
|
|
_console_login_finish();
|
|
}
|
|
|
|
# load US layout (from a root console)
|
|
sub console_loadkeys_us {
|
|
if (get_var('LANGUAGE') eq 'french') {
|
|
script_run "loqdkeys us", 0;
|
|
# might take a few secs
|
|
sleep 3;
|
|
}
|
|
elsif (get_var('LANGUAGE') eq 'japanese') {
|
|
script_run "loadkeys us", 0;
|
|
sleep 3;
|
|
}
|
|
}
|
|
|
|
sub do_bootloader {
|
|
# Handle bootloader screen. 'bootloader' is syslinux or grub.
|
|
# 'uefi' is whether this is a UEFI install, will get_var UEFI if
|
|
# not explicitly set. 'postinstall' is whether we're on an
|
|
# installed system or at the installer (this matters for how many
|
|
# times we press 'down' to find the kernel line when typing args).
|
|
# 'args' is a string of extra kernel args, if desired. 'mutex' is
|
|
# a parallel test mutex lock to wait for before proceeding, if
|
|
# desired. 'first' is whether to hit 'up' a couple of times to
|
|
# make sure we boot the first menu entry. 'timeout' is how long to
|
|
# wait for the bootloader screen.
|
|
my %args = (
|
|
postinstall => 0,
|
|
params => "",
|
|
mutex => "",
|
|
first => 1,
|
|
timeout => 30,
|
|
uefi => get_var("UEFI"),
|
|
ofw => get_var("OFW"),
|
|
@_
|
|
);
|
|
# if not postinstall not UEFI and not ofw, syslinux
|
|
$args{bootloader} //= ($args{uefi} || $args{postinstall} || $args{ofw}) ? "grub" : "syslinux";
|
|
# we use the firmware-type specific tags because we want to be
|
|
# sure we actually did a UEFI boot
|
|
my $boottag = "bootloader_bios";
|
|
$boottag = "bootloader_uefi" if ($args{uefi});
|
|
assert_screen $boottag, $args{timeout};
|
|
if ($args{mutex}) {
|
|
# cancel countdown
|
|
send_key "left";
|
|
mutex_lock $args{mutex};
|
|
mutex_unlock $args{mutex};
|
|
}
|
|
if ($args{first}) {
|
|
# press up a couple of times to make sure we're at first entry
|
|
send_key "up";
|
|
send_key "up";
|
|
}
|
|
if ($args{params}) {
|
|
if ($args{bootloader} eq "syslinux") {
|
|
send_key "tab";
|
|
}
|
|
else {
|
|
send_key "e";
|
|
# we need to get to the 'linux' line here, and grub does
|
|
# not have any easy way to do that. Depending on the arch
|
|
# and the Fedora release, we may have to press 'down' 2
|
|
# times, or 13, or 12, or some other goddamn number. That
|
|
# got painful to keep track of, so let's go bottom-up:
|
|
# press 'down' 50 times to make sure we're at the bottom,
|
|
# then 'up' twice to reach the 'linux' line. This seems to
|
|
# work in every permutation I can think of to test.
|
|
for (1 .. 50) {
|
|
send_key 'down';
|
|
}
|
|
sleep 1;
|
|
send_key 'up';
|
|
sleep 1;
|
|
send_key 'up';
|
|
send_key "end";
|
|
}
|
|
# Change type_string by type_safely because keyboard polling
|
|
# in SLOF usb-xhci driver failed sometimes in powerpc
|
|
type_safely " $args{params}";
|
|
}
|
|
save_screenshot; # for debug purpose
|
|
# ctrl-X boots from grub editor mode
|
|
send_key "ctrl-x";
|
|
# return boots all other cases
|
|
send_key "ret";
|
|
}
|
|
|
|
sub boot_decrypt {
|
|
# decrypt storage during boot; arg is timeout (in seconds)
|
|
my $timeout = shift || 60;
|
|
assert_screen "boot_enter_passphrase", $timeout;
|
|
type_string get_var("ENCRYPT_PASSWORD");
|
|
send_key "ret";
|
|
}
|
|
|
|
sub check_release {
|
|
# Checks whether the installed release matches a given value. E.g.
|
|
# `check_release(23)` checks whether the installed system is
|
|
# Fedora 23. The value can be 'Rawhide' or a Fedora release
|
|
# number; often you will want to use `get_var('VERSION')`. Expects
|
|
# a console prompt to be active when it is called.
|
|
my $release = shift;
|
|
my $check_command = "grep SUPPORT_PRODUCT_VERSION /etc/os-release";
|
|
validate_script_output $check_command, sub { $_ =~ m/REDHAT_SUPPORT_PRODUCT_VERSION=$release/ };
|
|
}
|
|
|
|
sub menu_launch_type {
|
|
# Launch an application in a graphical environment, by opening a
|
|
# launcher, typing the specified string and hitting enter. Pass
|
|
# the string to be typed to launch whatever it is you want.
|
|
my $app = shift;
|
|
# super does not work on KDE, because fml
|
|
send_key 'alt-f1';
|
|
# srsly KDE y u so slo
|
|
wait_still_screen 3;
|
|
type_very_safely $app;
|
|
send_key 'ret';
|
|
}
|
|
|
|
sub disable_firefox_studies {
|
|
# create a config file that disables Firefox's dumb 'shield
|
|
# studies' so they don't break tests:
|
|
# https://bugzilla.mozilla.org/show_bug.cgi?id=1529626
|
|
assert_script_run 'mkdir -p $(rpm --eval %_libdir)/firefox/distribution';
|
|
assert_script_run 'printf \'{"policies": {"DisableFirefoxStudies": true}}\' > $(rpm --eval %_libdir)/firefox/distribution/policies.json';
|
|
}
|
|
|
|
sub repos_mirrorlist {
|
|
# Use mirrorlist not metalink so we don't hit the timing issue where
|
|
# the infra repo is updated but mirrormanager metadata checksums
|
|
# have not been updated, and the infra repo is rejected as its
|
|
# metadata checksum isn't known to MM
|
|
my $files = shift;
|
|
$files ||= "/etc/yum.repos.d/fedora*.repo";
|
|
assert_script_run "sed -i -e 's,metalink,mirrorlist,g' ${files}";
|
|
}
|
|
|
|
sub _repo_setup_compose {
|
|
# Appropriate repo setup steps for testing a compose
|
|
# disable updates-testing and updates and use the compose location
|
|
# as the target for fedora and rawhide rather than mirrorlist, so
|
|
# tools see only packages from the compose under test
|
|
my $location = get_var("LOCATION");
|
|
return unless $location;
|
|
assert_script_run 'dnf config-manager --set-disabled updates-testing updates';
|
|
# script_run returns the exit code, so 'unless' here means 'if the file exists'
|
|
unless (script_run 'test -f /etc/yum.repos.d/fedora-updates-modular.repo') {
|
|
assert_script_run 'dnf config-manager --set-disabled updates-testing-modular updates-modular';
|
|
}
|
|
# we use script_run here as the rawhide and modular repo files
|
|
# won't always exist and we don't want to bother testing or
|
|
# predicting their existence; assert_script_run doesn't buy you
|
|
# much with sed as it'll return 0 even if it replaced nothing
|
|
script_run "sed -i -e 's,^metalink,#metalink,g' -e 's,^mirrorlist,#mirrorlist,g' -e 's,^#baseurl.*basearch,baseurl=${location}/Everything/\$basearch,g' -e 's,^#baseurl.*source,baseurl=${location}/Everything/source,g' /etc/yum.repos.d/{fedora,fedora-rawhide}.repo", 0;
|
|
script_run "sed -i -e 's,^metalink,#metalink,g' -e 's,^mirrorlist,#mirrorlist,g' -e 's,^#baseurl.*basearch,baseurl=${location}/Modular/\$basearch,g' -e 's,^#baseurl.*source,baseurl=${location}/Modular/source,g' /etc/yum.repos.d/{fedora-modular,fedora-rawhide-modular}.repo", 0;
|
|
|
|
# this can be used for debugging if something is going wrong
|
|
# unless (script_run 'pushd /etc/yum.repos.d && tar czvf yumreposd.tar.gz * && popd') {
|
|
# upload_logs "/etc/yum.repos.d/yumreposd.tar.gz";
|
|
# }
|
|
}
|
|
|
|
sub _repo_setup_updates {
|
|
# Appropriate repo setup steps for testing a Bodhi update
|
|
# Check if we already ran, bail if so
|
|
return unless script_run "test -f /etc/yum.repos.d/advisory.repo";
|
|
my $version = get_var("VERSION");
|
|
repos_mirrorlist();
|
|
if (get_var("DEVELOPMENT")) {
|
|
# Disable updates-testing so other bad updates don't break us
|
|
# this will do nothing on upgrade tests as we're on a stable
|
|
# release at this point, but it won't *hurt* anything, so no
|
|
# need to except that case really
|
|
assert_script_run "dnf config-manager --set-disabled updates-testing";
|
|
# same for Modular, if appropriate
|
|
unless (script_run 'test -f /etc/yum.repos.d/fedora-updates-modular.repo') {
|
|
assert_script_run "dnf config-manager --set-disabled updates-testing-modular";
|
|
}
|
|
}
|
|
|
|
# Set up an additional repo containing the update or task packages. We do
|
|
# this rather than simply running a one-time update because it may be the
|
|
# case that a package from the update isn't installed *now* but will be
|
|
# installed by one of the tests; by setting up a repo containing the
|
|
# update and enabling it here, we ensure all later 'dnf install' calls
|
|
# will get the packages from the update.
|
|
assert_script_run "mkdir -p /opt/update_repo";
|
|
# if NUMDISKS is above 1, assume we want to put the update repo on
|
|
# the other disk (to avoid huge updates exhausting space on the main
|
|
# disk)
|
|
if (get_var("NUMDISKS") > 1) {
|
|
# I think the disk will always be vdb. This creates a single large
|
|
# partition.
|
|
assert_script_run "echo 'type=83' | sfdisk /dev/vdb";
|
|
assert_script_run "mkfs.ext4 /dev/vdb1";
|
|
assert_script_run "echo '/dev/vdb1 /opt/update_repo ext4 defaults 1 2' >> /etc/fstab";
|
|
assert_script_run "mount /opt/update_repo";
|
|
}
|
|
assert_script_run "cd /opt/update_repo";
|
|
assert_script_run "dnf -y install bodhi-client git createrepo koji", 300;
|
|
|
|
# download the packages
|
|
if (get_var("ADVISORY_NVRS")) {
|
|
# regular update case
|
|
foreach my $nvr (split(/ /, get_var("ADVISORY_NVRS"))) {
|
|
assert_script_run "koji download-build --arch=" . get_var("ARCH") . " --arch=noarch $nvr", 600;
|
|
}
|
|
}
|
|
elsif (get_var("KOJITASK")) {
|
|
# Koji task case (KOJITASK will be set)
|
|
assert_script_run "koji download-task --arch=" . get_var("ARCH") . " --arch=noarch " . get_var("KOJITASK"), 600;
|
|
}
|
|
else {
|
|
die "Neither ADVISORY_NVRS nor KOJITASK set! Don't know what to do";
|
|
}
|
|
# for upgrade tests, we want to do the 'development' changes *after* we
|
|
# set up the update repo. We don't do the f28 fixups as we don't have
|
|
# f28 fedora-repos.
|
|
|
|
# this can be used for debugging if something is going wrong
|
|
# unless (script_run 'pushd /etc/yum.repos.d && tar czvf yumreposd.tar.gz * && popd') {
|
|
# upload_logs "/etc/yum.repos.d/yumreposd.tar.gz";
|
|
# }
|
|
|
|
# log the exact packages in the update at test time, with their
|
|
# source packages and epochs
|
|
assert_script_run 'rpm -qp *.rpm --qf "%{SOURCERPM} %{EPOCH} %{NAME}-%{VERSION}-%{RELEASE}\n" | sort -u > /var/log/updatepkgs.txt';
|
|
upload_logs "/var/log/updatepkgs.txt";
|
|
# also log just the binary package names: this is so we can check
|
|
# later whether any package from the update *should* have been
|
|
# installed, but was not
|
|
assert_script_run 'rpm -qp *.rpm --qf "%{NAME} " > /var/log/updatepkgnames.txt';
|
|
upload_logs "/var/log/updatepkgnames.txt";
|
|
|
|
# we periodically need to pull an update from updates-testing in
|
|
# to fix some bug or other. so, here's an organized way to do it.
|
|
# we do this here so the workaround packages are in the repo data
|
|
# but *not* in the package lists generated above (those should
|
|
# only include packages from the update under test). we'll define
|
|
# a hash of releases and update IDs. if no workarounds are needed
|
|
# for any release, the hash can be empty and this will do nothing
|
|
my %workarounds = (
|
|
"30" => ['FEDORA-2019-9ff3036c0a'],
|
|
"31" => ['FEDORA-2019-6f121fa8a0']
|
|
);
|
|
# then we'll download each update for our release:
|
|
my $advisories = $workarounds{$version};
|
|
foreach my $advisory (@$advisories) {
|
|
assert_script_run "bodhi updates download --updateid=$advisory", 180;
|
|
}
|
|
|
|
# create the repo metadata
|
|
assert_script_run "createrepo .";
|
|
# write a repo config file, unless this is the support_server test
|
|
# and it is running on a different release than the update is for
|
|
# (in this case we need the repo to exist but do not want to use
|
|
# it on the actual support_server system)
|
|
unless (get_var("TEST") eq "support_server" && $version ne get_var("CURRREL")) {
|
|
assert_script_run 'printf "[advisory]\nname=Advisory repo\nbaseurl=file:///opt/update_repo\nenabled=1\nmetadata_expire=3600\ngpgcheck=0" > /etc/yum.repos.d/advisory.repo';
|
|
# run an update now (except for upgrade tests)
|
|
script_run "dnf -y update", 900 unless (get_var("UPGRADE"));
|
|
}
|
|
# mark via a variable that we've set up the update/task repo and done
|
|
# all the logging stuff above
|
|
set_var('_ADVISORY_REPO_DONE', '1');
|
|
}
|
|
|
|
sub repo_setup {
|
|
# Run the appropriate sub-function for the job
|
|
get_var("ADVISORY_OR_TASK") ? _repo_setup_updates : _repo_setup_compose;
|
|
# This repo does not always exist for Rawhide or Branched, and
|
|
# some things (at least realmd) try to update the repodata for
|
|
# it even though it is disabled, and fail. At present none of the
|
|
# tests needs it, so let's just unconditionally nuke it.
|
|
assert_script_run "rm -f /etc/yum.repos.d/fedora-cisco-openh264.repo";
|
|
}
|
|
|
|
sub gnome_initial_setup {
|
|
# Handle gnome-initial-setup, with variations for the pre-login
|
|
# mode (when no user was created during install) and post-login
|
|
# mode (when user was created during install)
|
|
my %args = (
|
|
prelogin => 0,
|
|
timeout => 120,
|
|
@_
|
|
);
|
|
my $version = lc(get_var("VERSION"));
|
|
# the pages we *may* need to click 'next' on. *NOTE*: 'language'
|
|
# is the 'welcome' page, and is in fact never truly skipped; if
|
|
# it's configured to be skipped, it just shows without the language
|
|
# selection widget (so it's a bare 'welcome' page). Current openQA
|
|
# tests never see 'eula' or 'network'. You can find the upstream
|
|
# list in gnome-initial-setup/gnome-initial-setup.c , and the skip
|
|
# config file for Fedora is vendor.conf in the package repo.
|
|
my @nexts = ('language', 'keyboard', 'privacy', 'timezone', 'software');
|
|
# now, we're going to figure out how many of them this test will
|
|
# *actually* see...
|
|
if ($args{prelogin}) {
|
|
# 'language', 'keyboard' and 'timezone' are skipped on F28+ in
|
|
# the 'new user' mode by
|
|
# https://fedoraproject.org//wiki/Changes/ReduceInitialSetupRedundancy
|
|
# https://bugzilla.redhat.com/show_bug.cgi?id=1474787 ,
|
|
# except 'language' is never *really* skipped (see above)
|
|
@nexts = grep {$_ ne 'keyboard'} @nexts if ($version eq 'rawhide' || $version > 27);
|
|
@nexts = grep {$_ ne 'timezone'} @nexts if ($version eq 'rawhide' || $version > 27);
|
|
}
|
|
else {
|
|
# 'timezone' and 'software' are suppressed for the 'existing user'
|
|
# form of g-i-s
|
|
@nexts = grep {$_ ne 'software'} @nexts;
|
|
@nexts = grep {$_ ne 'timezone'} @nexts;
|
|
}
|
|
# 'additional software sources' screen does not display on F28+:
|
|
# https://bugzilla.gnome.org/show_bug.cgi?id=794825
|
|
@nexts = grep {$_ ne 'software'} @nexts if ($version eq 'rawhide' || $version > 27);
|
|
|
|
assert_screen "next_button", $args{timeout};
|
|
# wait a bit in case of animation
|
|
wait_still_screen 3;
|
|
# GDM 3.24.1 dumps a cursor in the middle of the screen here...
|
|
mouse_hide if ($args{prelogin});
|
|
for my $n (1..scalar(@nexts)) {
|
|
# click 'Next' $nexts times, moving the mouse to avoid
|
|
# highlight problems, sleeping to give it time to get
|
|
# to the next screen between clicks
|
|
mouse_set(100, 100);
|
|
wait_screen_change { assert_and_click "next_button"; };
|
|
# for Japanese, we need to workaround a bug on the keyboard
|
|
# selection screen
|
|
if ($n == 1 && get_var("LANGUAGE") eq 'japanese') {
|
|
if (!check_screen 'initial_setup_kana_kanji_selected', 5) {
|
|
record_soft_failure 'kana kanji not selected: bgo#776189';
|
|
assert_and_click 'initial_setup_kana_kanji';
|
|
}
|
|
}
|
|
}
|
|
unless (get_var("VNC_CLIENT")) {
|
|
# click 'Skip' one time (this is the 'goa' screen). We don't
|
|
# get it on VNC_CLIENT case as network isn't working (yet)
|
|
mouse_set(100,100);
|
|
wait_screen_change { assert_and_click "skip_button"; };
|
|
}
|
|
send_key "ret";
|
|
if ($args{prelogin}) {
|
|
# create user
|
|
my $user_login = get_var("USER_LOGIN") || "test";
|
|
my $user_password = get_var("USER_PASSWORD") || "weakpassword";
|
|
type_very_safely $user_login;
|
|
wait_screen_change { assert_and_click "next_button"; };
|
|
type_very_safely $user_password;
|
|
send_key "tab";
|
|
type_very_safely $user_password;
|
|
wait_screen_change { assert_and_click "next_button"; };
|
|
send_key "ret";
|
|
}
|
|
else {
|
|
# wait for the stupid 'help' screen to show and kill it
|
|
if (check_screen "getting_started", 30) {
|
|
send_key "alt-f4";
|
|
wait_still_screen 5;
|
|
}
|
|
else {
|
|
record_soft_failure "'getting started' missing (probably BGO#790811)";
|
|
}
|
|
# don't do it again on second load
|
|
}
|
|
set_var("_setup_done", 1);
|
|
}
|
|
|
|
sub _type_user_password {
|
|
# convenience function used by anaconda_create_user, not meant
|
|
# for direct use
|
|
my $user_password = get_var("USER_PASSWORD") || "weakpassword";
|
|
if (get_var("SWITCHED_LAYOUT")) {
|
|
# we double the password, the second time using the native
|
|
# layout, so the password has both ASCII and native characters
|
|
desktop_switch_layout "ascii", "anaconda";
|
|
type_very_safely $user_password;
|
|
desktop_switch_layout "native", "anaconda";
|
|
type_very_safely $user_password;
|
|
}
|
|
else {
|
|
type_very_safely $user_password;
|
|
}
|
|
}
|
|
|
|
sub anaconda_create_user {
|
|
# Create a user, in the anaconda interface. This is here because
|
|
# the same code works both during install and for initial-setup,
|
|
# which runs post-install, so we can share it.
|
|
my %args = (
|
|
timeout => 90,
|
|
@_
|
|
);
|
|
my $user_login = get_var("USER_LOGIN") || "test";
|
|
_assert_and_click("anaconda_install_user_creation", timeout=>$args{timeout});
|
|
assert_screen "anaconda_install_user_creation_screen";
|
|
# wait out animation
|
|
wait_still_screen 2;
|
|
type_very_safely $user_login;
|
|
type_very_safely "\t\t\t\t";
|
|
_type_user_password();
|
|
wait_screen_change { send_key "tab"; };
|
|
wait_still_screen 2;
|
|
_type_user_password();
|
|
# even with all our slow typing this still *sometimes* seems to
|
|
# miss a character, so let's try again if we have a warning bar.
|
|
# But not if we're installing with a switched layout, as those
|
|
# will *always* result in a warning bar at this point (see below)
|
|
if (!get_var("SWITCHED_LAYOUT") && check_screen "anaconda_warning_bar", 3) {
|
|
wait_screen_change { send_key "shift-tab"; };
|
|
wait_still_screen 2;
|
|
_type_user_password();
|
|
wait_screen_change { send_key "tab"; };
|
|
wait_still_screen 2;
|
|
_type_user_password();
|
|
}
|
|
assert_and_click "anaconda_install_user_creation_make_admin";
|
|
assert_and_click "anaconda_spoke_done";
|
|
# since 20170105, we will get a warning here when the password
|
|
# contains non-ASCII characters. Assume only switched layouts
|
|
# produce non-ASCII characters, though this isn't strictly true
|
|
if (get_var('SWITCHED_LAYOUT') && check_screen "anaconda_warning_bar", 3) {
|
|
wait_still_screen 1;
|
|
assert_and_click "anaconda_spoke_done";
|
|
}
|
|
}
|
|
|
|
sub check_desktop_clean {
|
|
# Check we're at a 'clean' desktop. This used to be a simple
|
|
# needle check, but Rawhide's default desktop is now one which
|
|
# changes over time, and the GNOME top bar is now translucent
|
|
# by default; together these changes mean it's impossible to
|
|
# make a reliable needle, so we need something more tricksy to
|
|
# cover that case. 'tries' is the amount of check cycles to run
|
|
# before giving up and failing; each cycle should take ~3 secs.
|
|
my %args = (
|
|
tries => 10,
|
|
@_
|
|
);
|
|
foreach my $i (1..$args{tries}) {
|
|
# we still *do* the needle check, for all cases it covers
|
|
return if (check_screen "graphical_desktop_clean", 1);
|
|
# now do the special GNOME case
|
|
if (get_var("DESKTOP") eq "gnome") {
|
|
send_key "super";
|
|
if (check_screen "overview_app_grid", 2) {
|
|
send_key "super";
|
|
wait_still_screen 3;
|
|
# go back to the desktop, if we're still at the app
|
|
# grid (can be a bit fuzzy depending on response lag)
|
|
while (check_screen "overview_app_grid", 1) {
|
|
send_key "super";
|
|
wait_still_screen 3;
|
|
}
|
|
return;
|
|
}
|
|
}
|
|
else {
|
|
# to keep the timing equal
|
|
sleep 2;
|
|
}
|
|
}
|
|
die "Clean desktop not reached!";
|
|
}
|
|
|
|
sub download_modularity_tests {
|
|
# Download the modularity test script, place in the system and then
|
|
# modify the access rights to make it executable.
|
|
my ($whitelist) = @_;
|
|
# we need python3-yaml for the script to run
|
|
assert_script_run 'dnf -y install python3-yaml', 180;
|
|
assert_script_run 'curl -o /root/test.py https://pagure.io/fedora-qa/modularity_testing_scripts/raw/master/f/modular_functions.py';
|
|
if ($whitelist eq 'whitelist') {
|
|
assert_script_run 'curl -o /root/whitelist https://pagure.io/fedora-qa/modularity_testing_scripts/raw/master/f/whitelist';
|
|
}
|
|
assert_script_run 'chmod 755 /root/test.py';
|
|
}
|
|
|
|
sub quit_firefox {
|
|
# Quit Firefox, handling the 'close multiple tabs' warning screen if
|
|
# it shows up
|
|
send_key "ctrl-q";
|
|
# expect to get to either the tabs warning or a console
|
|
if (check_screen ["user_console", "root_console", "firefox_close_tabs"], 30) {
|
|
# if we hit the tabs warning, click it
|
|
assert_and_click "firefox_close_tabs" if (match_has_tag "firefox_close_tabs");
|
|
}
|
|
# FIXME workaround for RHBZ #1663050 - with systemd 240, at this
|
|
# point the tty quits and we wind up back at the login prompt
|
|
wait_still_screen 5;
|
|
# on all paths where we hit this sub, we want to be logged in as
|
|
# root, so let's just run through console_login again. This is
|
|
# fine for older releases which don't have the bug, console_login
|
|
# will just notice we're already logged in as root and return.
|
|
# Timeout is set to 45 as sometimes it seems to take a while to
|
|
# get back to a console, e.g.
|
|
# https://openqa.stg.fedoraproject.org/tests/666186
|
|
console_login(user=>'root', timeout=>45);
|
|
}
|
|
|
|
sub start_with_launcher {
|
|
# Get the name of the needle with a launcher, find the launcher in the menu
|
|
# and click on it to start the application. This function works for the
|
|
# Gnome desktop.
|
|
|
|
# $launcher holds the launcher needle, but some of the apps are hidden in a submenu
|
|
# so this must be handled first to find the launcher needle.
|
|
|
|
my ($launcher,$submenu,$group) = @_;
|
|
$submenu //= '';
|
|
$group //= '';
|
|
my $desktop = get_var('DESKTOP');
|
|
|
|
my $item_to_check = $submenu || $launcher;
|
|
# The following varies for different desktops.
|
|
if ($desktop eq 'gnome') {
|
|
# Start the Activities page
|
|
send_key 'alt-f1';
|
|
wait_still_screen 5;
|
|
|
|
# Click on the menu icon to come into the menus
|
|
assert_and_click 'overview_app_grid';
|
|
wait_still_screen 5;
|
|
|
|
# Find the application launcher in the current menu page.
|
|
# If it cannot be found there, hit PageDown to go to another page.
|
|
|
|
send_key_until_needlematch($item_to_check, 'pgdn', 5, 3);
|
|
|
|
# If there was a submenu, click on that first.
|
|
if ($submenu) {
|
|
assert_and_click $submenu;
|
|
wait_still_screen 5;
|
|
}
|
|
# Click on the launcher
|
|
assert_and_click $launcher;
|
|
wait_still_screen 5;
|
|
}
|
|
elsif ($desktop eq 'kde'){
|
|
# Click on the KDE launcher icon
|
|
assert_and_click 'kde_menu_launcher';
|
|
wait_still_screen 2;
|
|
|
|
# Select the appropriate submenu
|
|
assert_and_click $submenu;
|
|
wait_still_screen 2;
|
|
|
|
# Select the appropriate menu subgroup where real launchers
|
|
# are placed, but only if requested
|
|
if ($group) {
|
|
send_key_until_needlematch($group, 'down', 20, 3);
|
|
send_key 'ret';
|
|
#assert_and_click $group;
|
|
wait_still_screen 2;
|
|
}
|
|
|
|
# Find and click on the menu item to start the application
|
|
send_key_until_needlematch($launcher, 'down', 40, 3);
|
|
send_key 'ret';
|
|
wait_still_screen 5;
|
|
}
|
|
}
|
|
|
|
|
|
sub quit_with_shortcut {
|
|
# Quit the application using the Alt-F4 keyboard shortcut
|
|
send_key 'alt-f4';
|
|
wait_still_screen 5;
|
|
assert_screen 'workspace';
|
|
|
|
}
|
|
|
|
sub lo_dismiss_tip {
|
|
# identify and close a 'tip of the day' window that shows on start
|
|
# of all LibreOffice apps. For the 'app startup' tests.
|
|
assert_screen ["libreoffice_tip", "libreoffice_any"];
|
|
# we use check_screen here just in case both needles match and
|
|
# libreoffice_any 'won'
|
|
send_key 'esc' if (check_screen "libreoffice_tip", 2);
|
|
}
|
|
|
|
sub advisory_get_installed_packages {
|
|
# For update tests (this only works if we've been through
|
|
# _repo_setup_updates), figure out which packages from the update
|
|
# are currently installed. This is here so we can do it both in
|
|
# _advisory_post and post_fail_hook.
|
|
return unless (get_var("_ADVISORY_REPO_DONE"));
|
|
assert_script_run 'rpm -qa --qf "%{SOURCERPM} %{EPOCH} %{NAME}-%{VERSION}-%{RELEASE}\n" | sort -u > /tmp/allpkgs.txt';
|
|
# this finds lines which appear in both files
|
|
# http://www.unix.com/unix-for-dummies-questions-and-answers/34549-find-matching-lines-between-2-files.html
|
|
if (script_run 'comm -12 /tmp/allpkgs.txt /var/log/updatepkgs.txt > /var/log/testedpkgs.txt') {
|
|
# occasionally, for some reason, it's unhappy about sorting;
|
|
# we shouldn't fail the test in this case, just upload the
|
|
# files so we can see why...
|
|
upload_logs "/tmp/allpkgs.txt", failok=>1;
|
|
upload_logs "/var/log/updatepkgs.txt", failok=>1;
|
|
}
|
|
# we'll try and upload the output even if comm 'failed', as it
|
|
# does in fact still write it in some cases
|
|
upload_logs "/var/log/testedpkgs.txt", failok=>1;
|
|
}
|
|
|
|
sub advisory_check_nonmatching_packages {
|
|
# For update tests (this only works if we've been through
|
|
# _repo_setup_updates), figure out if we have a different version
|
|
# of any package from the update installed - this indicates a
|
|
# problem, it likely means a dep issue meant dnf installed an
|
|
# older version from the frozen release repo
|
|
my %args = (
|
|
fatal => 1,
|
|
@_
|
|
);
|
|
return unless (get_var("_ADVISORY_REPO_DONE"));
|
|
# if this fails in advisory_post, we don't want to do it *again*
|
|
# unnecessarily in post_fail_hook
|
|
return if (get_var("_ACNMP_DONE"));
|
|
script_run 'touch /tmp/installedupdatepkgs.txt';
|
|
# this creates /tmp/installedupdatepkgs.txt as a sorted list of installed
|
|
# packages with the same name as packages from the update, in the same form
|
|
# as /var/log/updatepkgs.txt. The 'tail -1' tries to handle the problem of
|
|
# installonly packages like the kernel, where we wind up with *multiple*
|
|
# versions installed after the update; I'm hoping the last line of output
|
|
# for any given package is the most recent version, i.e. the one in the
|
|
# update.
|
|
script_run 'for pkg in $(cat /var/log/updatepkgnames.txt); do rpm -q $pkg && rpm -q $pkg --qf "%{SOURCERPM} %{EPOCH} %{NAME}-%{VERSION}-%{RELEASE}\n" | tail -1 >> /tmp/installedupdatepkgs.txt; done';
|
|
script_run 'sort -u -o /tmp/installedupdatepkgs.txt /tmp/installedupdatepkgs.txt';
|
|
# if any line appears in installedupdatepkgs.txt but not updatepkgs.txt,
|
|
# we have a problem.
|
|
if (script_run 'comm -23 /tmp/installedupdatepkgs.txt /var/log/updatepkgs.txt > /var/log/installednotupdatedpkgs.txt') {
|
|
# occasionally, for some reason, it's unhappy about sorting;
|
|
# we shouldn't fail the test in this case, just upload the
|
|
# files so we can see why...
|
|
upload_logs "/tmp/installedupdatepkgs.txt", failok=>1;
|
|
upload_logs "/var/log/updatepkgs.txt", failok=>1;
|
|
}
|
|
# this exits 1 if the file is zero-length, 0 if it's longer
|
|
# if it's 0, that's *BAD*: we want to upload the file and fail
|
|
unless (script_run 'test -s /var/log/installednotupdatedpkgs.txt') {
|
|
upload_logs "/var/log/installednotupdatedpkgs.txt", failok=>1;
|
|
upload_logs "/var/log/updatepkgs.txt", failok=>1;
|
|
my $message = "Package(s) from update not installed when it should have been! See installednotupdatedpkgs.txt";
|
|
if ($args{fatal}) {
|
|
set_var("_ACNMP_DONE", "1");
|
|
die $message;
|
|
}
|
|
else {
|
|
# if we're already in post_fail_hook, we don't want to die again
|
|
record_info $message;
|
|
}
|
|
}
|
|
}
|
|
|
|
sub select_rescue_mode {
|
|
# handle bootloader screen
|
|
assert_screen "bootloader", 30;
|
|
if (get_var('OFW')) {
|
|
# select "rescue system" directly
|
|
send_key "down";
|
|
send_key "down";
|
|
send_key "ret";
|
|
}
|
|
else {
|
|
# select troubleshooting
|
|
send_key "down";
|
|
send_key "ret";
|
|
# select "rescue system"
|
|
if (get_var('UEFI')) {
|
|
send_key "down";
|
|
# we need this on aarch64 till #1661288 is resolved
|
|
if (get_var('ARCH') eq 'aarch64') {
|
|
send_key "e";
|
|
# duped with do_bootloader, sadly...
|
|
for (1 .. 50) {
|
|
send_key 'down';
|
|
}
|
|
sleep 1;
|
|
send_key 'up';
|
|
sleep 1;
|
|
send_key 'up';
|
|
send_key "end";
|
|
type_safely " console=tty0";
|
|
send_key "ctrl-x";
|
|
}
|
|
else {
|
|
send_key "ret";
|
|
}
|
|
}
|
|
else {
|
|
type_string "r\n";
|
|
}
|
|
}
|
|
|
|
assert_screen "rescue_select", 120; # it takes time to start anaconda
|
|
}
|
|
|
|
sub copy_devcdrom_as_isofile {
|
|
# copy /dev/cdrom as iso file and verify checksum is same
|
|
# as cdrom previously retrieved from ISO_URL
|
|
my $isoname = shift;
|
|
assert_script_run "dd if=/dev/cdrom of=$isoname", 360;
|
|
# verify iso checksum
|
|
my $cdurl = get_var('ISO_URL');
|
|
# ISO_URL may not be set if we POSTed manually or something; just assume
|
|
# we're OK in that case
|
|
return unless $cdurl;
|
|
my $cmd = <<EOF;
|
|
urld="$cdurl"; urld=\${urld%/*}; chkf=\$(curl -fs \$urld/ |grep CHECKSUM | sed -E 's/.*href=.//; s/\".*//') && curl -f \$urld/\$chkf -o /tmp/x
|
|
chkref=\$(grep -E 'SHA256.*dvd' /tmp/x | sed -e 's/.*= //') && echo "\$chkref $isoname" >/tmp/x
|
|
sha256sum -c /tmp/x
|
|
EOF
|
|
assert_script_run($_) foreach (split /\n/, $cmd);
|
|
}
|
|
|
|
sub bypass_1691487 {
|
|
if (script_run 'echo "expected command supposed to be typed without error."') {
|
|
record_soft_failure 'brc#1691487 bypass';
|
|
script_run 'echo "trial bypass dup chars brc#1691487"';
|
|
}
|
|
}
|
|
|
|
sub get_release_number {
|
|
# return the release number; so usually VERSION, but for Rawhide,
|
|
# we return RAWREL. This allows us to avoid constantly doing stuff
|
|
# like `if ($version eq "Rawhide" || $version > 30)`.
|
|
my $version = get_var("VERSION");
|
|
my $rawrel = get_var("RAWREL", "Rawhide");
|
|
return $rawrel if ($version eq "Rawhide");
|
|
return $version
|
|
}
|
|
|
|
sub tell_source {
|
|
# This helper function identifies the Subvariant of the tested system.
|
|
# For the purposes of identification testing, we are only interested
|
|
# if the system is Workstation, Server, or something else, because,
|
|
# except Workstation and Server, there are no graphical differences
|
|
# between various spins and isos.
|
|
my $iso = get_var('SUBVARIANT');
|
|
if ($iso eq 'Workstation' or $iso eq 'Server') {
|
|
$iso = lc($iso);
|
|
}
|
|
elsif ($iso eq 'AtomicHost') {
|
|
$iso = 'atomic';
|
|
}
|
|
elsif ($iso eq 'Silverblue') {
|
|
$iso = 'workstation';
|
|
}
|
|
else {
|
|
$iso = 'generic';
|
|
}
|
|
return $iso;
|
|
}
|
|
|
|
sub check_left_bar {
|
|
# This method is used by identification tests to check whether the Anaconda
|
|
# bar on the left side of the screen corresponds with the correct version.
|
|
# It looks different for Server, Workstation and others.
|
|
my $source = tell_source;
|
|
assert_screen "leftbar_${source}";
|
|
}
|
|
|
|
sub check_top_bar {
|
|
# This method is used by identification tests to check whether the
|
|
# top bar in Anaconda corresponds with the correct version of the spin.
|
|
my $source = tell_source;
|
|
assert_screen "topbar_${source}";
|
|
}
|
|
|
|
sub check_prerelease {
|
|
# This method is used by identification tests to check if
|
|
# Anaconda shows the PRERELEASE info for Rawhide versions.
|
|
# As it seems, the rules for showing the PRERELEASE are not
|
|
# as simple as it may look like. It seems to me, that the PRERELEASE
|
|
# is shown on Rawhide intallations, which is pretty easy to test because
|
|
# the "VERSION" variable is Rawhide. On Final RC, the PRERELEASE should
|
|
# be turned off, while it should be present between before that.
|
|
# When Fedora is branched, the "VERSION" changes to the version number
|
|
# and this is not changed even with Final, so we cannot test that.
|
|
# Investigating the history, I noticed that all nightly builds have
|
|
# that prerelease turned on. And also, it is there on a Beta candidate.
|
|
# We can test for that. For update tests, if DEVELOPMENT is set the
|
|
# prerelease tags should appear, otherwise they should not.
|
|
|
|
my $beta = get_var('ISO');
|
|
# install_pxeboot tests have ISO blanked, so we must use ISO_URL
|
|
$beta ||= get_var('ISO_URL');
|
|
my $nightly = get_var('BUILD');
|
|
my $version = get_var('VERSION');
|
|
my $development = get_var('DEVELOPMENT');
|
|
# Let us see if the installed system is one that needs to have the prerelease
|
|
# note shown, default is NO.
|
|
my $prerelease = 0;
|
|
if ($beta =~ /Beta/ or $version eq "Rawhide" or $development) {
|
|
$prerelease = 1;
|
|
}
|
|
# If the image is a nightly build or test build, it is not clear whether
|
|
# the prerelease should be there or not, but according to what we decided
|
|
# this is not a big issue. This piece of code can be used later, when
|
|
# we decide differently.
|
|
elsif ($nightly =~ /\.[nt]\.\d+/) {
|
|
$prerelease = 10;
|
|
}
|
|
# For all prerelease requiring ISOs, assert that prerelease is there.
|
|
if ($prerelease == 1) {
|
|
assert_screen "prerelease_note";
|
|
}
|
|
elsif ($prerelease == 0) {
|
|
# If the prerelease note is shown, where it should not be, die!
|
|
if (check_screen "prerelease_note") {
|
|
die "The PRERELEASE tag is shown, but it should NOT be.";
|
|
}
|
|
}
|
|
}
|
|
|
|
sub _assert_and_click {
|
|
# this is a wrapper around assert_and_click which handles this:
|
|
# https://github.com/os-autoinst/os-autoinst/pull/1075/files
|
|
# it changed the signature without any backward compatibility, so
|
|
# earlier os-autoinsts require an *array* of args, but later ones
|
|
# require a *hash* of args. This works with both.
|
|
my $version = $OpenQA::Isotovideo::Interface::version;
|
|
my ($mustmatch, %args) = @_;
|
|
if ($version > 13) {
|
|
return assert_and_click($mustmatch, %args);
|
|
}
|
|
else {
|
|
$args{timeout} //= $bmwqemu::default_timeout;
|
|
$args{button} //= 'left';
|
|
$args{dclick} //= 0;
|
|
$args{mousehide} //= 0;
|
|
return assert_and_click($mustmatch, $args{button}, $args{timeout}, 0, $args{dclick});
|
|
}
|
|
}
|
|
|
|
sub check_version {
|
|
# This function checks if the correct version is display during installation
|
|
# in Anaconda, i.e. nonlive media showing Rawhide when Rawhide and version numbers
|
|
# when not Rawhide, while live media always showing version numbers.
|
|
|
|
my $version = lc(get_var('VERSION'));
|
|
if ($version eq 'rawhide' && get_var('LIVE')) {
|
|
$version = get_var('RAWREL');
|
|
}
|
|
assert_screen "version_${version}_ident";
|
|
}
|
|
|
|
sub spell_version_number {
|
|
my $version = shift;
|
|
# spelt version of Rawhide is...Rawhide
|
|
return "Rawhide" if ($version eq 'Rawhide');
|
|
my %ones = (
|
|
"0" => "Zero",
|
|
"1" => "One",
|
|
"2" => "Two",
|
|
"3" => "Three",
|
|
"4" => "Four",
|
|
"5" => "Five",
|
|
"6" => "Six",
|
|
"7" => "Seven",
|
|
"8" => "Eight",
|
|
"9" => "Nine",
|
|
);
|
|
my %tens = (
|
|
"2" => "Twenty",
|
|
"3" => "Thirty",
|
|
"4" => "Fourty",
|
|
"5" => "Fifty",
|
|
"6" => "Sixty",
|
|
"7" => "Seventy",
|
|
"8" => "Eighty",
|
|
"9" => "Ninety",
|
|
);
|
|
|
|
my $ten = substr($version, 0, 1);
|
|
my $one = substr($version, 1, 1);
|
|
my $speltnum = "";
|
|
if ($one eq "0") {
|
|
$speltnum = "$tens{$ten}";
|
|
}
|
|
else {
|
|
$speltnum = "$tens{$ten} $ones{$one}";
|
|
}
|
|
return $speltnum;
|
|
}
|
|
|
|
sub rec_log {
|
|
my ($line, $condition, $failref, $filename) = @_;
|
|
$filename ||= '/tmp/os-release.log';
|
|
if ($condition) {
|
|
$line = "${line} - SUCCEEDED\n";
|
|
}
|
|
else {
|
|
push @$failref, $line;
|
|
$line = "${line} - FAILED\n";
|
|
}
|
|
script_run "echo \"$line\" >> $filename";
|
|
|
|
}
|
|
|
|
sub click_unwanted_notifications {
|
|
# there are a few KDE tests where at some point we want to click
|
|
# on all visible 'update available' notifications (there can be
|
|
# more than one, thanks to
|
|
# https://bugzilla.redhat.com/show_bug.cgi?id=1730482 ) and the
|
|
# buggy 'akonadi_migration_agent_running' popup if it's showing -
|
|
# https://bugzilla.redhat.com/show_bug.cgi?id=1716005
|
|
# Returns an array indicating which notifications it closed
|
|
wait_still_screen 5;
|
|
my $count = 10;
|
|
my @closed;
|
|
while ($count > 0 && check_screen "desktop_update_notification_popup", 5) {
|
|
$count -= 1;
|
|
push (@closed, 'update');
|
|
click_lastmatch;
|
|
}
|
|
if (check_screen "akonadi_migration_agent_running", 5) {
|
|
click_lastmatch;
|
|
push (@closed, 'akonadi');
|
|
}
|
|
return @closed;
|
|
}
|
|
|
|
# In each application test, when the application is started successfully, it
|
|
# will register to the list of applications.
|
|
sub register_application {
|
|
my $application = shift;
|
|
push(@application_list, $application);
|
|
print("APPLICATION REGISTERED: $application \n");
|
|
}
|
|
|
|
1;
|