mirror of
https://pagure.io/fedora-qa/os-autoinst-distri-fedora.git
synced 2024-11-25 07:13:09 +00:00
cf5532fc3a
So...there's an ffmpeg update: https://bodhi.fedoraproject.org/updates/FEDORA-2023-a5e10b188a which went stable. It includes new sonames of all the ffmpeg libs. It also pulls in a thing called oneVPL, which has a bug that breaks ostree composes. There's a big kf5 update: https://bodhi.fedoraproject.org/updates/FEDORA-2023-b086a98f78 which contains kf5-kfilemetadata, which is built against ffmpeg. Neal made sure that update's build of it was built against the new ffmpeg and submitted both for stable at once - but the tests on the kf5 update failed because they weren't run against the new ffmpeg as it wasn't yet stable, and the kf5 update was ejected from the push because of the failed tests. So now we have the ffmpeg update stable but not the kf5-kfilemetadata rebuild for it, which will break KDE stuff, and the oneVPL issue means ostree composes will all fail. This adds the ffmpeg update as a workaround so we can re-run the tests for the kf5 update and get them to pass so we can push it stable. It also adds the oneVPL update as a workaround so ostree compose tests don't start failing. Signed-off-by: Adam Williamson <awilliam@redhat.com>
1633 lines
67 KiB
Perl
1633 lines
67 KiB
Perl
package utils;
|
|
|
|
use strict;
|
|
|
|
use base 'Exporter';
|
|
use Exporter;
|
|
|
|
use lockapi;
|
|
use testapi;
|
|
our @EXPORT = qw/run_with_error_check type_safely type_very_safely desktop_vt boot_to_login_screen console_login console_switch_layout desktop_switch_layout console_loadkeys_us do_bootloader boot_decrypt check_release menu_launch_type repo_setup setup_workaround_repo disable_updates_repos cleanup_workaround_repo console_initial_setup handle_welcome_screen gnome_initial_setup anaconda_create_user check_desktop download_modularity_tests quit_firefox advisory_get_installed_packages advisory_check_nonmatching_packages start_with_launcher quit_with_shortcut disable_firefox_studies select_rescue_mode copy_devcdrom_as_isofile get_release_number check_left_bar check_top_bar check_prerelease check_version spell_version_number _assert_and_click is_branched rec_log click_unwanted_notifications repos_mirrorlist register_application get_registered_applications solidify_wallpaper check_and_install_git download_testdata make_serial_writable/;
|
|
|
|
# We introduce this global variable to hold the list of applications that have
|
|
# registered during the apps_startstop_test when they have sucessfully run.
|
|
our @application_list;
|
|
|
|
sub run_with_error_check {
|
|
my ($func, $error_screen) = @_;
|
|
# Check screen does not work for serial console, so we need to use
|
|
# different checking mechanism for it.
|
|
if (testapi::is_serial_terminal) {
|
|
# by using 'unless' and 'expect_not_found=>1' here we avoid
|
|
# the web UI showing each failure to see the error message as
|
|
# a 'failed match'
|
|
die "Error screen appeared" unless (wait_serial($error_screen, timeout => 5, expect_not_found => 1));
|
|
$func->();
|
|
die "Error screen appeared" unless (wait_serial($error_screen, timeout => 5, expect_not_found => 1));
|
|
}
|
|
else {
|
|
die "Error screen appeared" if (check_screen $error_screen, 5);
|
|
$func->();
|
|
die "Error screen appeared" if (check_screen $error_screen, 5);
|
|
}
|
|
}
|
|
|
|
# high-level 'type this string quite safely but reasonably fast'
|
|
# function whose specific implementation may vary
|
|
sub type_safely {
|
|
my $string = shift;
|
|
type_string($string, wait_screen_change => 3, max_interval => 20);
|
|
# similarity level 38 as there will commonly be a flashing
|
|
# cursor and the default level (47) is too tight
|
|
wait_still_screen(stilltime => 2, similarity_level => 38);
|
|
}
|
|
|
|
# high-level 'type this string extremely safely and rather slow'
|
|
# function whose specific implementation may vary
|
|
sub type_very_safely {
|
|
my $string = shift;
|
|
type_string($string, wait_screen_change => 1, max_interval => 1);
|
|
# similarity level 38 as there will commonly be a flashing
|
|
# cursor and the default level (47) is too tight
|
|
wait_still_screen(stilltime => 5, similarity_level => 38);
|
|
}
|
|
|
|
sub get_release_number {
|
|
# return the release number; so usually VERSION, but for Rawhide,
|
|
# we return RAWREL. This allows us to avoid constantly doing stuff
|
|
# like `if ($version eq "Rawhide" || $version > 30)`.
|
|
my $version = get_var("VERSION");
|
|
my $rawrel = get_var("RAWREL", "Rawhide");
|
|
return $rawrel if ($version eq "Rawhide");
|
|
return $version;
|
|
}
|
|
|
|
# Wait for login screen to appear. Handle the annoying GPU buffer
|
|
# problem where we see a stale copy of the login screen from the
|
|
# previous boot. Will suffer a ~30 second delay if there's a chance
|
|
# we're *already at* the expected login screen.
|
|
sub boot_to_login_screen {
|
|
my %args = @_;
|
|
$args{timeout} //= 300;
|
|
if (testapi::is_serial_terminal) {
|
|
# For serial console, just wait for the login prompt
|
|
unless (wait_serial "login:", timeout => $args{timeout}) {
|
|
die "No login prompt shown on serial console.";
|
|
}
|
|
}
|
|
else {
|
|
# we may start at a screen that matches one of the needles; if so,
|
|
# wait till we don't (e.g. when rebooting at end of live install,
|
|
# we match text_console_login until the console disappears).
|
|
# The following is true for non-serial console.
|
|
my $count = 5;
|
|
while (check_screen("login_screen", 3) && $count > 0) {
|
|
sleep 5;
|
|
$count -= 1;
|
|
}
|
|
assert_screen "login_screen", $args{timeout};
|
|
if (match_has_tag "graphical_login") {
|
|
wait_still_screen(timeout => 30, stilltime => 10, similarity_level => 38);
|
|
assert_screen "login_screen";
|
|
}
|
|
}
|
|
}
|
|
|
|
# Switch keyboard layouts at a console
|
|
sub console_switch_layout {
|
|
# switcher key combo differs between layouts, for console
|
|
if (get_var("LANGUAGE", "") eq "russian") {
|
|
send_key "ctrl-shift";
|
|
}
|
|
}
|
|
|
|
# switch to 'native' or 'ascii' input method in a graphical desktop
|
|
# usually switched configs have one mode for inputting ascii-ish
|
|
# characters (which may be 'us' keyboard layout, or a local layout for
|
|
# inputting ascii like 'jp') and one mode for inputting native
|
|
# characters (which may be another keyboard layout, like 'ru', or an
|
|
# input method for more complex languages)
|
|
# 'environment' can be a desktop name or 'anaconda' for anaconda
|
|
# if not set, will use get_var('DESKTOP') or default 'anaconda'
|
|
sub desktop_switch_layout {
|
|
my ($layout, $environment) = @_;
|
|
$layout //= 'ascii';
|
|
$environment //= get_var("DESKTOP", "anaconda");
|
|
# if already selected, we're good
|
|
return if (check_screen "${environment}_layout_${layout}", 3);
|
|
# otherwise we need to switch
|
|
my $switcher = "alt-shift"; # anaconda
|
|
$switcher = "super-spc" if $environment eq 'gnome';
|
|
# KDE? not used yet
|
|
send_key $switcher;
|
|
assert_screen "${environment}_layout_${layout}", 3;
|
|
}
|
|
|
|
# this is used at the end of console_login to check if we got a prompt
|
|
# indicating that we got a bash shell, but sourcing of /etc/bashrc
|
|
# failed (the prompt looks different in this case). We treat this as
|
|
# a soft failure.
|
|
sub _console_login_finish {
|
|
# The check differs according to the console used.
|
|
if (testapi::is_serial_terminal) {
|
|
unless (wait_serial("-bash-.*[#\$]", timeout => 5, expect_not_found => 1)) {
|
|
record_soft_failure "It looks like profile sourcing failed";
|
|
}
|
|
}
|
|
else {
|
|
if (match_has_tag "bash_noprofile") {
|
|
record_soft_failure "It looks like profile sourcing failed";
|
|
}
|
|
}
|
|
}
|
|
|
|
# this subroutine handles logging in as a root/specified user into console
|
|
# it requires TTY to be already displayed (handled by the root_console()
|
|
# method of distribution classes)
|
|
sub console_login {
|
|
my %args = (
|
|
user => "root",
|
|
password => get_var("ROOT_PASSWORD", "weakpassword"),
|
|
# default is 10 seconds, set below, 0 means 'default'
|
|
timeout => 0,
|
|
@_
|
|
);
|
|
$args{timeout} ||= 10;
|
|
|
|
# Since we do not test many serial console tests, and we probably
|
|
# only want to test serial console on a minimal installation only,
|
|
# let us not do all the magic to handle different console logins
|
|
# and let us simplify the process.
|
|
# We will check if we are logged in, and if so, we will log out to
|
|
# enable a new proper login based on the user variable.
|
|
if (get_var("SERIAL_CONSOLE")) {
|
|
# Check for the usual prompt.
|
|
if (wait_serial("~\][#\$]", timeout => 5, quiet => 1)) {
|
|
type_string "logout\n";
|
|
# Wait a bit to let the logout properly finish.
|
|
sleep 10;
|
|
}
|
|
# Do the new login.
|
|
type_string $args{user};
|
|
type_string "\n";
|
|
sleep 2;
|
|
type_string $args{password};
|
|
type_string "\n";
|
|
# Let's perform a simple login test. This is the same as
|
|
# whoami, but has the advantage of existing in installer env
|
|
assert_script_run "id -un";
|
|
unless (wait_serial $args{user}, timeout => 5) {
|
|
die "Logging onto the serial console has failed.";
|
|
}
|
|
}
|
|
else {
|
|
# There's a timing problem when we switch from a logged-in console
|
|
# to a non-logged in console and immediately call this function;
|
|
# if the switch lags a bit, this function will match one of the
|
|
# logged-in needles for the console we switched from, and get out
|
|
# of sync (e.g. https://openqa.stg.fedoraproject.org/tests/1664 )
|
|
# To avoid this, we'll sleep a few seconds before starting
|
|
sleep 4;
|
|
|
|
my $good = "";
|
|
my $bad = "";
|
|
if ($args{user} eq "root") {
|
|
$good = "root_console";
|
|
$bad = "user_console";
|
|
}
|
|
else {
|
|
$good = "user_console";
|
|
$bad = "root_console";
|
|
}
|
|
|
|
if (check_screen $bad, 0) {
|
|
# we don't want to 'wait' for this as it won't return
|
|
script_run "exit", 0;
|
|
sleep 2;
|
|
}
|
|
|
|
assert_screen [$good, 'text_console_login'], $args{timeout};
|
|
# if we're already logged in, all is good
|
|
if (match_has_tag $good) {
|
|
_console_login_finish();
|
|
return;
|
|
}
|
|
# otherwise, we saw the login prompt, type the username
|
|
type_string("$args{user}\n");
|
|
assert_screen [$good, 'console_password_required'], 45;
|
|
# on a live image, just the user name will be enough
|
|
if (match_has_tag $good) {
|
|
# clear the screen (so the remaining login prompt text
|
|
# doesn't confuse subsequent runs of this)
|
|
my $clearstr = "clear\n";
|
|
$clearstr = "cleqr\n" if (get_var("LANGUAGE") eq 'french');
|
|
type_string $clearstr;
|
|
_console_login_finish();
|
|
return;
|
|
}
|
|
# otherwise, type the password
|
|
type_string "$args{password}";
|
|
if (get_var("SWITCHED_LAYOUT") and $args{user} ne "root") {
|
|
# see _do_install_and_reboot; when layout is switched
|
|
# user password is doubled to contain both US and native
|
|
# chars
|
|
console_switch_layout;
|
|
type_string "$args{password}";
|
|
console_switch_layout;
|
|
}
|
|
send_key "ret";
|
|
# make sure we reached the console
|
|
unless (check_screen($good, 30)) {
|
|
# as of 2018-10 we have a bug in sssd which makes this take
|
|
# unusually long in the FreeIPA tests, let's allow longer,
|
|
# with a soft fail - RHBZ #1644919
|
|
record_soft_failure "Console login is taking a long time - #1644919?";
|
|
my $timeout = 30;
|
|
# even an extra 30 secs isn't long enough on aarch64...
|
|
$timeout = 90 if (get_var("ARCH") eq "aarch64");
|
|
assert_screen($good, $timeout);
|
|
}
|
|
# clear the screen (so the remaining login prompt text
|
|
# doesn't confuse subsequent runs of this)
|
|
my $clearstr = "clear\n";
|
|
$clearstr = "cleqr\n" if (get_var("LANGUAGE") eq 'french');
|
|
type_string $clearstr;
|
|
}
|
|
_console_login_finish();
|
|
}
|
|
|
|
# Figure out what tty the desktop is on, switch to it. Assumes we're
|
|
# at a root console
|
|
sub desktop_vt {
|
|
# use loginctl or ps to find the tty of test's session (loginctl)
|
|
# or gnome-session, Xwayland or Xorg (ps); as of 2019-09 we often
|
|
# get tty? for Xwayland and Xorg processes, so using loginctl can
|
|
# help
|
|
my $xout;
|
|
# don't fail test if we don't find any process, just guess tty1.
|
|
# os-autoinst calls the script with 'bash -e' which causes it to
|
|
# stop as soon as any command fails, so we use ||: to make the
|
|
# first grep return 0 even if it matches nothing
|
|
eval { $xout = script_output ' loginctl | grep test ||:; ps -e | egrep "(startplasma|gnome-session|Xwayland|Xorg)" | grep -o tty[0-9] ||:' };
|
|
my $tty = 1; # default
|
|
while ($xout =~ /tty(\d)/g) {
|
|
$tty = $1; # most recent match is probably best
|
|
}
|
|
send_key "ctrl-alt-f${tty}";
|
|
# work around https://gitlab.gnome.org/GNOME/gnome-software/issues/582
|
|
# if it happens. As of 2019-05, seeing something similar on KDE too
|
|
my $desktop = get_var('DESKTOP');
|
|
my $sfr = 0;
|
|
my $timeout = 10;
|
|
my $count = 6;
|
|
while (check_screen("auth_required", $timeout) && $count > 0) {
|
|
$count -= 1;
|
|
unless ($sfr) {
|
|
record_soft_failure "spurious 'auth required' - https://gitlab.gnome.org/GNOME/gnome-software/issues/582";
|
|
$sfr = 1;
|
|
$timeout = 3;
|
|
}
|
|
click_lastmatch if ($desktop eq 'kde');
|
|
if (match_has_tag "auth_required_fprint") {
|
|
my $user = get_var("USER_LOGIN", "test");
|
|
send_key "ctrl-alt-f6";
|
|
console_login;
|
|
assert_script_run "echo SCAN ${user}-finger-1 | socat STDIN UNIX-CONNECT:/run/fprintd-virt";
|
|
send_key "ctrl-alt-f${tty}";
|
|
}
|
|
else {
|
|
# bit sloppy but in all cases where this is used, this is the
|
|
# correct password
|
|
type_very_safely "weakpassword\n";
|
|
}
|
|
}
|
|
}
|
|
|
|
# load US layout (from a root console)
|
|
sub console_loadkeys_us {
|
|
if (get_var('LANGUAGE') eq 'french') {
|
|
script_run "loqdkeys us", 0;
|
|
# might take a few secs
|
|
sleep 3;
|
|
}
|
|
elsif (get_var('LANGUAGE') eq 'japanese') {
|
|
script_run "loadkeys us", 0;
|
|
sleep 3;
|
|
}
|
|
}
|
|
|
|
sub do_bootloader {
|
|
# Handle bootloader screen. 'bootloader' is syslinux or grub.
|
|
# 'uefi' is whether this is a UEFI install, will get_var UEFI if
|
|
# not explicitly set. 'postinstall' is whether we're on an
|
|
# installed system or at the installer (this matters for how many
|
|
# times we press 'down' to find the kernel line when typing args).
|
|
# 'args' is a string of extra kernel args, if desired. 'mutex' is
|
|
# a parallel test mutex lock to wait for before proceeding, if
|
|
# desired. 'first' is whether to hit 'up' a couple of times to
|
|
# make sure we boot the first menu entry. 'timeout' is how long to
|
|
# wait for the bootloader screen.
|
|
my %args = (
|
|
postinstall => 0,
|
|
params => "",
|
|
mutex => "",
|
|
first => 1,
|
|
timeout => 30,
|
|
uefi => get_var("UEFI"),
|
|
ofw => get_var("OFW"),
|
|
@_
|
|
);
|
|
# if not postinstall, not UEFI, not ofw, and not F37+, syslinux
|
|
my $relnum = get_release_number;
|
|
$args{bootloader} //= ($args{uefi} || $args{postinstall} || $args{ofw}) || $relnum > 36 ? "grub" : "syslinux";
|
|
# we use the firmware-type specific tags because we want to be
|
|
# sure we actually did a UEFI boot
|
|
my $boottag = "bootloader_bios";
|
|
$boottag = "bootloader_uefi" if ($args{uefi});
|
|
assert_screen $boottag, $args{timeout};
|
|
if ($args{mutex}) {
|
|
# cancel countdown
|
|
send_key "left";
|
|
mutex_lock $args{mutex};
|
|
mutex_unlock $args{mutex};
|
|
}
|
|
if ($args{first}) {
|
|
# press up a couple of times to make sure we're at first entry
|
|
send_key "up";
|
|
send_key "up";
|
|
}
|
|
if ($args{params}) {
|
|
if ($args{bootloader} eq "syslinux") {
|
|
send_key "tab";
|
|
}
|
|
else {
|
|
send_key "e";
|
|
# we need to get to the 'linux' line here, and grub does
|
|
# not have any easy way to do that. Depending on the arch
|
|
# and the Fedora release, we may have to press 'down' 2
|
|
# times, or 13, or 12, or some other goddamn number. That
|
|
# got painful to keep track of, so let's go bottom-up:
|
|
# press 'down' 50 times to make sure we're at the bottom,
|
|
# then 'up' twice to reach the 'linux' line. This seems to
|
|
# work in every permutation I can think of to test.
|
|
for (1 .. 50) {
|
|
send_key 'down';
|
|
}
|
|
sleep 1;
|
|
send_key 'up';
|
|
sleep 1;
|
|
send_key 'up';
|
|
send_key "end";
|
|
}
|
|
# Change type_string by type_safely because keyboard polling
|
|
# in SLOF usb-xhci driver failed sometimes in powerpc
|
|
type_safely " $args{params}";
|
|
}
|
|
# for debug purpose
|
|
save_screenshot;
|
|
# ctrl-X boots from grub editor mode
|
|
send_key "ctrl-x";
|
|
# return boots all other cases
|
|
send_key "ret";
|
|
}
|
|
|
|
sub boot_decrypt {
|
|
# decrypt storage during boot; arg is timeout (in seconds)
|
|
my $timeout = shift || 60;
|
|
assert_screen "boot_enter_passphrase", $timeout;
|
|
type_string get_var("ENCRYPT_PASSWORD");
|
|
send_key "ret";
|
|
}
|
|
|
|
sub check_release {
|
|
# Checks whether the installed release matches a given value. E.g.
|
|
# `check_release(23)` checks whether the installed system is
|
|
# Fedora 23. The value can be 'Rawhide' or a Fedora release
|
|
# number; often you will want to use `get_var('VERSION')`. Expects
|
|
# a console prompt to be active when it is called.
|
|
my $release = shift;
|
|
my $check_command = "grep SUPPORT_PRODUCT_VERSION /etc/os-release";
|
|
validate_script_output $check_command, sub { $_ =~ m/REDHAT_SUPPORT_PRODUCT_VERSION=$release/ };
|
|
}
|
|
|
|
sub disable_firefox_studies {
|
|
if (get_var("CANNED")) {
|
|
# enable rpm-ostree /usr overlay so we can write to /usr
|
|
assert_script_run "rpm-ostree usroverlay";
|
|
}
|
|
# if the first file exists, we've already run, so we can skip
|
|
# running again
|
|
return unless (script_run 'test -f $(rpm --eval %_libdir)/firefox/distribution/policies.json');
|
|
# create a config file that disables Firefox's dumb 'shield
|
|
# studies' so they don't break tests:
|
|
# https://bugzilla.mozilla.org/show_bug.cgi?id=1529626
|
|
# and also disables the password manager stuff so that doesn't
|
|
# break password entry:
|
|
# https://bugzilla.mozilla.org/show_bug.cgi?id=1635833
|
|
# and *also* tries to disable "first run pages", though this
|
|
# doesn't seem to be working yet:
|
|
# https://bugzilla.mozilla.org/show_bug.cgi?id=1703903
|
|
assert_script_run 'mkdir -p $(rpm --eval %_libdir)/firefox/distribution';
|
|
assert_script_run 'printf \'{"policies": {"DisableFirefoxStudies": true, "OfferToSaveLogins": false, "OverrideFirstRunPage": "", "OverridePostUpdatePage": ""}}\' > $(rpm --eval %_libdir)/firefox/distribution/policies.json';
|
|
# Now create a preferences override file that disables the
|
|
# quicksuggest and total cookie protection onboarding screens
|
|
# see https://support.mozilla.org/en-US/kb/customizing-firefox-using-autoconfig
|
|
# for why this wacky pair of files with required values is needed
|
|
# and https://bugzilla.mozilla.org/show_bug.cgi?id=1703903 again
|
|
# for the actual values
|
|
assert_script_run 'mkdir -p $(rpm --eval %_libdir)/firefox/browser/defaults/preferences';
|
|
assert_script_run 'printf "// required comment\npref(\'general.config.filename\', \'openqa-overrides.cfg\');\npref(\'general.config.obscure_value\', 0);\n" > $(rpm --eval %_libdir)/firefox/browser/defaults/preferences/openqa-overrides.js';
|
|
assert_script_run 'printf "// required comment\npref(\'browser.urlbar.quicksuggest.shouldShowOnboardingDialog\', false);\npref(\'privacy.restrict3rdpartystorage.rollout.enabledByDefault\', false);\n" > $(rpm --eval %_libdir)/firefox/openqa-overrides.cfg';
|
|
}
|
|
|
|
sub repos_mirrorlist {
|
|
# Use mirrorlist not metalink so we don't hit the timing issue where
|
|
# the infra repo is updated but mirrormanager metadata checksums
|
|
# have not been updated, and the infra repo is rejected as its
|
|
# metadata checksum isn't known to MM
|
|
my $files = shift;
|
|
$files ||= "/etc/yum.repos.d/fedora*.repo";
|
|
assert_script_run "sed -i -e 's,metalink,mirrorlist,g' ${files}";
|
|
}
|
|
|
|
sub cleanup_workaround_repo {
|
|
# clean up the workaround repo (see next).
|
|
script_run "rm -rf /mnt/workarounds_repo";
|
|
script_run "rm -f /etc/yum.repos.d/workarounds.repo";
|
|
}
|
|
|
|
sub setup_workaround_repo {
|
|
# we periodically need to pull an update from updates-testing in
|
|
# to fix some bug or other. so, here's an organized way to do it.
|
|
# we do this here so the workaround packages are in the repo data
|
|
# but *not* in the package lists generated above (those should
|
|
# only include packages from the update under test). we'll define
|
|
# a hash of releases and update IDs. if no workarounds are needed
|
|
# for any release, the hash can be empty and this will do nothing
|
|
my $version = shift || get_var("VERSION");
|
|
cleanup_workaround_repo;
|
|
script_run "dnf -y install bodhi-client createrepo_c koji", 300;
|
|
# write a repo config file, unless this is the support_server test
|
|
# and it is running on a different release than the update is for
|
|
# (in this case we need the repo to exist but do not want to use
|
|
# it on the actual support_server system)
|
|
unless (get_var("TEST") eq "support_server" && $version ne get_var("CURRREL")) {
|
|
assert_script_run 'printf "[workarounds]\nname=Workarounds repo\nbaseurl=file:///mnt/workarounds_repo\nenabled=1\nmetadata_expire=1\ngpgcheck=0" > /etc/yum.repos.d/workarounds.repo';
|
|
}
|
|
assert_script_run "mkdir -p /mnt/workarounds_repo";
|
|
assert_script_run "pushd /mnt/workarounds_repo";
|
|
my %workarounds = (
|
|
"36" => [],
|
|
"37" => [],
|
|
"38" => ["FEDORA-2023-a5e10b188a", "FEDORA-2023-a433b7cf46"],
|
|
"39" => [],
|
|
);
|
|
# then we'll download each update for our release:
|
|
my $advortasks = $workarounds{$version};
|
|
foreach my $advortask (@$advortasks) {
|
|
my $cmd = "bodhi updates download --updateid=$advortask";
|
|
if ($advortask =~ /^\d+$/) {
|
|
my $arch = get_var("ARCH");
|
|
$cmd = "koji download-task --arch=$arch --arch=noarch $advortask";
|
|
}
|
|
my $count = 3;
|
|
my $success = 0;
|
|
while ($count) {
|
|
if (script_run $cmd, 600) {
|
|
$count -= 1;
|
|
}
|
|
else {
|
|
$count = 0;
|
|
$success = 1;
|
|
}
|
|
}
|
|
die "Workaround update download failed!" unless $success;
|
|
}
|
|
# and create repo metadata
|
|
assert_script_run "createrepo .";
|
|
assert_script_run "popd";
|
|
}
|
|
|
|
sub disable_updates_repos {
|
|
# disable updates-testing, or both updates-testing and updates.
|
|
# factors out similar code in a few different places.
|
|
my %args = (
|
|
both => 0,
|
|
@_
|
|
);
|
|
my $nonmod = "updates-testing";
|
|
$nonmod .= " updates" if ($args{both});
|
|
assert_script_run "dnf config-manager --set-disabled $nonmod";
|
|
unless (script_run 'test -f /etc/yum.repos.d/fedora-updates-testing-modular.repo') {
|
|
my $mod = "updates-testing-modular";
|
|
$mod .= " updates-modular" if ($args{both});
|
|
assert_script_run "dnf config-manager --set-disabled $mod";
|
|
}
|
|
}
|
|
|
|
sub _repo_setup_compose {
|
|
# doesn't work for IoT or CoreOS, anything that hits this on those
|
|
# paths must work with default mirror config...
|
|
my $subvariant = get_var("SUBVARIANT");
|
|
return if ($subvariant eq "IoT" || $subvariant eq "CoreOS");
|
|
# Appropriate repo setup steps for testing a compose
|
|
# disable updates-testing and updates and use the compose location
|
|
# as the target for fedora and rawhide rather than mirrorlist, so
|
|
# tools see only packages from the compose under test
|
|
my $location = get_var("LOCATION");
|
|
return unless $location;
|
|
disable_updates_repos(both => 1);
|
|
# we use script_run here as the rawhide and modular repo files
|
|
# won't always exist and we don't want to bother testing or
|
|
# predicting their existence; assert_script_run doesn't buy you
|
|
# much with sed as it'll return 0 even if it replaced nothing
|
|
script_run "sed -i -e 's,^metalink,#metalink,g' -e 's,^mirrorlist,#mirrorlist,g' -e 's,^#baseurl.*basearch,baseurl=${location}/Everything/\$basearch,g' -e 's,^#baseurl.*source,baseurl=${location}/Everything/source,g' /etc/yum.repos.d/{fedora,fedora-rawhide}.repo", 0;
|
|
script_run "sed -i -e 's,^metalink,#metalink,g' -e 's,^mirrorlist,#mirrorlist,g' -e 's,^#baseurl.*basearch,baseurl=${location}/Modular/\$basearch,g' -e 's,^#baseurl.*source,baseurl=${location}/Modular/source,g' /etc/yum.repos.d/{fedora-modular,fedora-rawhide-modular}.repo", 0;
|
|
|
|
# this can be used for debugging if something is going wrong
|
|
# unless (script_run 'pushd /etc/yum.repos.d && tar czvf yumreposd.tar.gz * && popd') {
|
|
# upload_logs "/etc/yum.repos.d/yumreposd.tar.gz";
|
|
# }
|
|
}
|
|
|
|
sub _repo_setup_updates {
|
|
# Appropriate repo setup steps for testing a Bodhi update
|
|
# Check if we already ran, bail if so
|
|
return unless script_run "test -f /mnt/updatepkgs.txt";
|
|
my $version = get_var("VERSION");
|
|
my $currrel = get_var("CURRREL", "0");
|
|
my $arch = get_var("ARCH");
|
|
# this can be used for debugging repo config if something is wrong
|
|
# unless (script_run 'pushd /etc/yum.repos.d && tar czvf yumreposd.tar.gz * && popd') {
|
|
# upload_logs "/etc/yum.repos.d/yumreposd.tar.gz";
|
|
# }
|
|
|
|
# Set up an additional repo containing the update or task packages. We do
|
|
# this rather than simply running a one-time update because it may be the
|
|
# case that a package from the update isn't installed *now* but will be
|
|
# installed by one of the tests; by setting up a repo containing the
|
|
# update and enabling it here, we ensure all later 'dnf install' calls
|
|
# will get the packages from the update.
|
|
assert_script_run "mkdir -p /mnt/update_repo";
|
|
# if NUMDISKS is above 1, assume we want to put the update repo on
|
|
# the other disk (to avoid huge updates exhausting space on the main
|
|
# disk)
|
|
if (get_var("NUMDISKS") > 1) {
|
|
# I think the disk will always be vdb. This creates a single large
|
|
# partition.
|
|
assert_script_run "echo 'type=83' | sfdisk /dev/vdb";
|
|
assert_script_run "mkfs.ext4 /dev/vdb1";
|
|
assert_script_run "echo '/dev/vdb1 /mnt/update_repo ext4 defaults 1 2' >> /etc/fstab";
|
|
assert_script_run "mount /mnt/update_repo";
|
|
}
|
|
assert_script_run "cd /mnt/update_repo";
|
|
# on CANNED, we need to enter the toolbox at this point
|
|
if (get_var("CANNED")) {
|
|
my $tboxcmd = "toolbox -y enter";
|
|
# FIXME there's no f39 toolbox container yet:
|
|
# https://github.com/containers/toolbox/issues/1233
|
|
# drop this workaround when that's fixed
|
|
$tboxcmd .= " -r 38" if (get_var("VERSION") eq get_var("RAWREL"));
|
|
type_string "$tboxcmd\n";
|
|
|
|
# look for the little purple dot
|
|
assert_screen "console_in_toolbox", 180;
|
|
}
|
|
# use mirrorlist not metalink in repo configs
|
|
repos_mirrorlist();
|
|
# Disable updates-testing so other bad updates don't break us
|
|
disable_updates_repos(both => 0) if ($version > $currrel);
|
|
# use the buildroot repo on Rawhide: see e.g.
|
|
# https://pagure.io/fedora-ci/general/issue/376 for why
|
|
if (get_var("VERSION") eq get_var("RAWREL") && get_var("TEST") ne "support_server") {
|
|
assert_script_run 'printf "[koji-rawhide]\nname=koji-rawhide\nbaseurl=https://kojipkgs.fedoraproject.org/repos/rawhide/latest/' . $arch . '/\ncost=2000\nenabled=1\ngpgcheck=0\n" > /etc/yum.repos.d/koji-rawhide.repo';
|
|
}
|
|
# set up the workaround repo
|
|
setup_workaround_repo;
|
|
if (get_var("CANNED")) {
|
|
# install and use en_US.UTF-8 locale for consistent sort
|
|
# ordering
|
|
assert_script_run "dnf -y install glibc-langpack-en", 300;
|
|
assert_script_run "export LC_ALL=en_US.UTF-8";
|
|
}
|
|
script_run "dnf -y install bodhi-client createrepo_c koji", 300;
|
|
|
|
# download the packages
|
|
if (get_var("ADVISORY_NVRS") || get_var("ADVISORY_NVRS_1")) {
|
|
# regular update case
|
|
# old style single ADVISORY_NVRS var
|
|
my @nvrs = split(/ /, get_var("ADVISORY_NVRS"));
|
|
unless (@nvrs) {
|
|
# new style chunked ADVISORY_NVRS_N vars
|
|
my $count = 1;
|
|
while ($count) {
|
|
if (get_var("ADVISORY_NVRS_$count")) {
|
|
push @nvrs, split(/ /, get_var("ADVISORY_NVRS_$count"));
|
|
$count++;
|
|
}
|
|
else {
|
|
$count = 0;
|
|
}
|
|
}
|
|
}
|
|
foreach my $nvr (@nvrs) {
|
|
my $kojitime = 600;
|
|
# texlive has a ridiculous number of subpackages
|
|
$kojitime = 1500 if ((rindex $nvr, "texlive", 0) == 0);
|
|
if (script_run "koji download-build --arch=$arch --arch=noarch $nvr 2> download.log", $kojitime) {
|
|
# if the error was because the build has no packages
|
|
# for our arch, that's okay, skip it. otherwise, die
|
|
if (script_run "grep 'No .*available for $nvr' download.log") {
|
|
die "koji download-build failed!";
|
|
}
|
|
}
|
|
}
|
|
}
|
|
elsif (get_var("KOJITASK")) {
|
|
# Koji task case (KOJITASK will be set)
|
|
assert_script_run "koji download-task --arch=$arch --arch=noarch " . get_var("KOJITASK"), 600;
|
|
}
|
|
else {
|
|
die "Neither ADVISORY_NVRS nor KOJITASK set! Don't know what to do";
|
|
}
|
|
|
|
# log the exact packages in the update at test time, with their
|
|
# source packages and epochs. we use /mnt as the path for this
|
|
# and similar files because, on ostree-based installs where we
|
|
# have to use a toolbox container for part of this, it's common
|
|
# to the host system and container
|
|
assert_script_run 'rpm -qp *.rpm --qf "%{SOURCERPM} %{NAME} %{EPOCHNUM} %{VERSION} %{RELEASE}\n" | sort -u > /mnt/updatepkgs.txt';
|
|
upload_logs "/mnt/updatepkgs.txt";
|
|
# also log just the binary package names: this is so we can check
|
|
# later whether any package from the update *should* have been
|
|
# installed, but was not
|
|
assert_script_run 'rpm -qp *.rpm --qf "%{NAME} " > /mnt/updatepkgnames.txt';
|
|
upload_logs "/mnt/updatepkgnames.txt";
|
|
|
|
# create the repo metadata
|
|
assert_script_run "createrepo .", timeout => 180;
|
|
# write a repo config file, unless this is the support_server test
|
|
# and it is running on a different release than the update is for
|
|
# (in this case we need the repo to exist but do not want to use
|
|
# it on the actual support_server system)
|
|
unless (get_var("TEST") eq "support_server" && $version ne get_var("CURRREL")) {
|
|
assert_script_run 'printf "[advisory]\nname=Advisory repo\nbaseurl=file:///mnt/update_repo\nenabled=1\nmetadata_expire=3600\ngpgcheck=0" > /etc/yum.repos.d/advisory.repo';
|
|
# run an update now, except for upgrade or install tests,
|
|
# where the updated packages should have been installed
|
|
# already and we want to fail if they weren't, or CANNED
|
|
# tests, there's no point updating the toolbox
|
|
script_run "dnf -y update", 1200 unless (get_var("UPGRADE") || get_var("INSTALL") || get_var("CANNED"));
|
|
# on liveinst tests, we'll remove the packages we installed
|
|
# above (and their deps, which dnf will include automatically),
|
|
# just in case they're in the update under test; otherwise we
|
|
# get a bogus failure for the package not being updated
|
|
script_run "dnf -y remove bodhi-client createrepo koji", 600 if (get_var("INSTALL") && !get_var("CANNED"));
|
|
}
|
|
# exit the toolbox on CANNED
|
|
if (get_var("CANNED")) {
|
|
type_string "exit\n";
|
|
wait_still_screen 5;
|
|
}
|
|
}
|
|
|
|
sub repo_setup {
|
|
# Run the appropriate sub-function for the job
|
|
get_var("ADVISORY_OR_TASK") ? _repo_setup_updates : _repo_setup_compose;
|
|
# This repo does not always exist for Rawhide or Branched, and
|
|
# some things (at least realmd) try to update the repodata for
|
|
# it even though it is disabled, and fail. At present none of the
|
|
# tests needs it, so let's just unconditionally nuke it.
|
|
assert_script_run "rm -f /etc/yum.repos.d/fedora-cisco-openh264.repo";
|
|
}
|
|
|
|
sub console_initial_setup {
|
|
# Handle console initial-setup. Currently used only for ARM disk
|
|
# image tests.
|
|
assert_screen "console_initial_setup", 500;
|
|
# IMHO it's better to use sleeps than to have needle for every text screen
|
|
wait_still_screen 5;
|
|
|
|
# Set timezone
|
|
type_string "2\n";
|
|
wait_still_screen 5;
|
|
type_string "1\n"; # Set timezone
|
|
wait_still_screen 5;
|
|
type_string "1\n"; # Europe
|
|
wait_still_screen 5;
|
|
type_string "37\n"; # Prague
|
|
wait_still_screen 7;
|
|
|
|
# Set root password
|
|
type_string "4\n";
|
|
wait_still_screen 5;
|
|
type_string get_var("ROOT_PASSWORD") || "weakpassword";
|
|
send_key "ret";
|
|
wait_still_screen 5;
|
|
type_string get_var("ROOT_PASSWORD") || "weakpassword";
|
|
send_key "ret";
|
|
wait_still_screen 7;
|
|
|
|
# Create user
|
|
type_string "5\n";
|
|
wait_still_screen 5;
|
|
type_string "1\n"; # create new
|
|
wait_still_screen 5;
|
|
type_string "3\n"; # set username
|
|
wait_still_screen 5;
|
|
type_string get_var("USER_LOGIN", "test");
|
|
send_key "ret";
|
|
wait_still_screen 5;
|
|
type_string "5\n"; # set password
|
|
wait_still_screen 5;
|
|
type_string get_var("USER_PASSWORD", "weakpassword");
|
|
send_key "ret";
|
|
wait_still_screen 5;
|
|
type_string get_var("USER_PASSWORD", "weakpassword");
|
|
send_key "ret";
|
|
wait_still_screen 5;
|
|
type_string "6\n"; # make him an administrator
|
|
wait_still_screen 5;
|
|
type_string "c\n";
|
|
wait_still_screen 7;
|
|
|
|
assert_screen "console_initial_setup_done", 30;
|
|
type_string "c\n"; # continue
|
|
}
|
|
|
|
sub handle_welcome_screen {
|
|
# handle the 'welcome' screen on GNOME and KDE since F38. shared
|
|
# in a few places
|
|
if (check_screen "getting_started", 45) {
|
|
if (get_var("DESKTOP") eq "kde") {
|
|
# just closing it seems to result in it running again on
|
|
# next boot, so let's click Skip
|
|
click_lastmatch;
|
|
}
|
|
else {
|
|
send_key "alt-f4";
|
|
# for GNOME 40, alt-f4 doesn't work
|
|
send_key "esc";
|
|
}
|
|
wait_still_screen 5;
|
|
set_var("_WELCOME_DONE", 1);
|
|
}
|
|
else {
|
|
record_soft_failure "Welcome tour missing";
|
|
}
|
|
}
|
|
|
|
sub gnome_initial_setup {
|
|
# Handle gnome-initial-setup, with variations for the pre-login
|
|
# mode (when no user was created during install) and post-login
|
|
# mode (when user was created during install)
|
|
my %args = (
|
|
prelogin => 0,
|
|
timeout => 120,
|
|
@_
|
|
);
|
|
my $relnum = get_release_number;
|
|
# the pages we *may* need to click 'next' on. *NOTE*: 'language'
|
|
# is the 'welcome' page, and is in fact never truly skipped; if
|
|
# it's configured to be skipped, it just shows without the language
|
|
# selection widget (so it's a bare 'welcome' page). Current openQA
|
|
# tests never see 'eula' or 'network'. You can find the upstream
|
|
# list in gnome-initial-setup/gnome-initial-setup.c , and the skip
|
|
# config file for Fedora is vendor.conf in the package repo.
|
|
my @nexts = ('language', 'keyboard', 'privacy', 'timezone', 'software');
|
|
# now, we're going to figure out how many of them this test will
|
|
# *actually* see...
|
|
if ($args{prelogin}) {
|
|
# 'language', 'keyboard' and 'timezone' are skipped on F28+ in
|
|
# the 'new user' mode by
|
|
# https://fedoraproject.org//wiki/Changes/ReduceInitialSetupRedundancy
|
|
# https://bugzilla.redhat.com/show_bug.cgi?id=1474787 ,
|
|
# except 'language' is never *really* skipped (see above)
|
|
@nexts = grep { $_ ne 'keyboard' } @nexts;
|
|
@nexts = grep { $_ ne 'timezone' } @nexts;
|
|
}
|
|
else {
|
|
# 'timezone' and 'software' are suppressed for the 'existing user'
|
|
# form of g-i-s
|
|
@nexts = grep { $_ ne 'software' } @nexts;
|
|
@nexts = grep { $_ ne 'timezone' } @nexts;
|
|
}
|
|
|
|
# note: in g-i-s 3.37.91 and later, the first screen in systemwide
|
|
# mode has a "Start Setup" button, not a "Next" button
|
|
unless (check_screen ["next_button", "start_setup", "auth_required"], $args{timeout}) {
|
|
record_soft_failure "g-i-s taking longer than expected to start up!";
|
|
assert_screen ["next_button", "start_setup", "auth_required"], $args{timeout};
|
|
}
|
|
# workaround auth dialog appearing to change timezone even
|
|
# though timezone screen is disabled
|
|
if (match_has_tag("auth_required")) {
|
|
record_soft_failure "Unexpected authentication required: https://gitlab.gnome.org/GNOME/gnome-initial-setup/-/issues/106";
|
|
send_key "esc";
|
|
assert_screen ["next_button", "start_setup"];
|
|
}
|
|
# wait a bit in case of animation
|
|
wait_still_screen 3;
|
|
# one more check for frickin auth_required
|
|
if (check_screen "auth_required") {
|
|
record_soft_failure "Unexpected authentication required: https://gitlab.gnome.org/GNOME/gnome-initial-setup/-/issues/106";
|
|
send_key "esc";
|
|
}
|
|
# GDM 3.24.1 dumps a cursor in the middle of the screen here...
|
|
mouse_hide if ($args{prelogin});
|
|
for my $n (1 .. scalar(@nexts)) {
|
|
# click 'Next' $nexts times, moving the mouse to avoid
|
|
# highlight problems, sleeping to give it time to get
|
|
# to the next screen between clicks
|
|
mouse_set(100, 100);
|
|
if ($n == 1) {
|
|
# only accept start_setup one time, to avoid matching
|
|
# on it during transition to next screen. also accept
|
|
# next_button as in per-user mode, first screen has that
|
|
# not start_setup
|
|
wait_screen_change { assert_and_click ["next_button", "start_setup"]; };
|
|
}
|
|
else {
|
|
wait_screen_change { assert_and_click "next_button"; };
|
|
}
|
|
# for Japanese, we need to workaround a bug on the keyboard
|
|
# selection screen
|
|
if ($n == 1 && get_var("LANGUAGE") eq 'japanese') {
|
|
if (!check_screen 'initial_setup_kana_kanji_selected', 5) {
|
|
record_soft_failure 'kana kanji not selected: bgo#776189';
|
|
assert_and_click 'initial_setup_kana_kanji';
|
|
}
|
|
}
|
|
}
|
|
unless (get_var("VNC_CLIENT")) {
|
|
# We should be at the GOA screen, except on VNC_CLIENT case
|
|
# where network isn't working yet. click 'Skip' one time. If
|
|
# it's not visible we may have hit
|
|
# https://bugzilla.redhat.com/show_bug.cgi?id=1997310 , which
|
|
# we'll handle as a soft failure
|
|
mouse_set(100, 100);
|
|
if (check_screen "skip_button", 60) {
|
|
wait_screen_change { click_lastmatch; };
|
|
}
|
|
else {
|
|
record_soft_failure "GOA screen not seen! Likely RHBZ #1997310";
|
|
}
|
|
}
|
|
send_key "ret";
|
|
if ($args{prelogin}) {
|
|
# create user
|
|
my $user_login = get_var("USER_LOGIN") || "test";
|
|
my $user_password = get_var("USER_PASSWORD") || "weakpassword";
|
|
type_very_safely $user_login;
|
|
wait_screen_change { assert_and_click "next_button"; };
|
|
# temporarily (until the versions are stable) we need to check
|
|
# whether we're on 43 or 44 here
|
|
my $extratab = 0;
|
|
$extratab = 1 if (check_screen 'initial_setup_44', 5);
|
|
type_very_safely $user_password;
|
|
send_key "tab";
|
|
# on GNOME 44+ we need a second tab here to reach the confirm box
|
|
send_key "tab" if ($extratab);
|
|
type_very_safely $user_password;
|
|
wait_screen_change { assert_and_click "next_button"; };
|
|
send_key "ret";
|
|
}
|
|
else {
|
|
handle_welcome_screen;
|
|
}
|
|
# don't do it again on second load
|
|
set_var("_SETUP_DONE", 1);
|
|
}
|
|
|
|
sub _type_user_password {
|
|
# convenience function used by anaconda_create_user, not meant
|
|
# for direct use
|
|
my $user_password = get_var("USER_PASSWORD") || "weakpassword";
|
|
if (get_var("SWITCHED_LAYOUT")) {
|
|
# we double the password, the second time using the native
|
|
# layout, so the password has both ASCII and native characters
|
|
desktop_switch_layout "ascii", "anaconda";
|
|
type_very_safely $user_password;
|
|
desktop_switch_layout "native", "anaconda";
|
|
type_very_safely $user_password;
|
|
}
|
|
else {
|
|
type_very_safely $user_password;
|
|
}
|
|
}
|
|
|
|
sub anaconda_create_user {
|
|
# Create a user, in the anaconda interface. This is here because
|
|
# the same code works both during install and for initial-setup,
|
|
# which runs post-install, so we can share it.
|
|
my %args = (
|
|
timeout => 90,
|
|
@_
|
|
);
|
|
my $user_login = get_var("USER_LOGIN") || "test";
|
|
assert_and_click("anaconda_install_user_creation", timeout => $args{timeout});
|
|
assert_screen "anaconda_install_user_creation_screen";
|
|
# wait out animation
|
|
wait_still_screen 2;
|
|
type_very_safely $user_login;
|
|
type_very_safely "\t\t\t\t";
|
|
_type_user_password();
|
|
wait_screen_change { send_key "tab"; };
|
|
wait_still_screen 2;
|
|
_type_user_password();
|
|
# even with all our slow typing this still *sometimes* seems to
|
|
# miss a character, so let's try again if we have a warning bar.
|
|
# But not if we're installing with a switched layout, as those
|
|
# will *always* result in a warning bar at this point (see below)
|
|
if (!get_var("SWITCHED_LAYOUT") && check_screen "anaconda_warning_bar", 3) {
|
|
wait_screen_change { send_key "shift-tab"; };
|
|
wait_still_screen 2;
|
|
_type_user_password();
|
|
wait_screen_change { send_key "tab"; };
|
|
wait_still_screen 2;
|
|
_type_user_password();
|
|
}
|
|
assert_and_click "anaconda_spoke_done";
|
|
# since 20170105, we will get a warning here when the password
|
|
# contains non-ASCII characters. Assume only switched layouts
|
|
# produce non-ASCII characters, though this isn't strictly true
|
|
if (get_var('SWITCHED_LAYOUT') && check_screen "anaconda_warning_bar", 3) {
|
|
wait_still_screen 1;
|
|
assert_and_click "anaconda_spoke_done";
|
|
}
|
|
}
|
|
|
|
sub check_desktop {
|
|
# Check we're at a desktop. We do this by looking for the "apps"
|
|
# menu button ("Activities" button on GNOME, kicker button on
|
|
# KDE). This is set up as a helper function so we can handle
|
|
# GNOME's behaviour of opening the overview on first login; all
|
|
# our tests were written when GNOME *didn't* do that, so it
|
|
# would be awkward to find all the places in them where we need
|
|
# to close the overview. Instead, we just have this function
|
|
# close it if it's open.
|
|
my %args = (
|
|
timeout => 30,
|
|
@_
|
|
);
|
|
my $count = 5;
|
|
my $activematched = 0;
|
|
while ($count > 0) {
|
|
$count -= 1;
|
|
assert_screen "apps_menu_button", $args{timeout};
|
|
if ($count == 4) {
|
|
# GNOME 42 shows the inactive menu button briefly before
|
|
# opening the overview. So we need to wait a bit on first
|
|
# cycle in case GNOME is about to open the overview.
|
|
wait_still_screen 5;
|
|
assert_screen "apps_menu_button";
|
|
}
|
|
# Here's where we detect if the overview is open and close it
|
|
if (match_has_tag "apps_menu_button_active") {
|
|
$activematched = 1;
|
|
wait_still_screen 5;
|
|
send_key "super";
|
|
wait_still_screen 5;
|
|
}
|
|
else {
|
|
# this means we saw 'inactive', which is what we want
|
|
last;
|
|
}
|
|
}
|
|
if ($activematched) {
|
|
# make sure we got to inactive after active
|
|
die "never reached apps_menu_button_inactive!" unless (match_has_tag "apps_menu_button_inactive");
|
|
}
|
|
}
|
|
|
|
sub download_modularity_tests {
|
|
# Download the modularity test script, place in the system and then
|
|
# modify the access rights to make it executable.
|
|
my ($whitelist) = @_;
|
|
# we need python3-yaml for the script to run
|
|
assert_script_run 'dnf -y install python3-yaml', 180;
|
|
assert_script_run 'curl -o /root/test.py https://pagure.io/fedora-qa/modularity_testing_scripts/raw/master/f/modular_functions.py';
|
|
if ($whitelist eq 'whitelist') {
|
|
assert_script_run 'curl -o /root/whitelist https://pagure.io/fedora-qa/modularity_testing_scripts/raw/master/f/whitelist';
|
|
}
|
|
assert_script_run 'chmod 755 /root/test.py';
|
|
}
|
|
|
|
sub quit_firefox {
|
|
# Quit Firefox, handling the 'close multiple tabs' warning screen if
|
|
# it shows up. Expects to quit to a recognizable console
|
|
send_key "ctrl-q";
|
|
# expect to get to either the tabs warning or a console
|
|
if (check_screen ["user_console", "root_console", "firefox_close_tabs"], 30) {
|
|
# if we hit a console we're good
|
|
unless (match_has_tag("firefox_close_tabs")) {
|
|
wait_still_screen 5;
|
|
return;
|
|
}
|
|
# otherwise we hit the tabs warning, click it
|
|
click_lastmatch;
|
|
# again, if we hit a console, we're good
|
|
if (check_screen ["user_console", "root_console"], 30) {
|
|
wait_still_screen 5;
|
|
return;
|
|
}
|
|
}
|
|
# if we reach here, we didn't see a console. This is most likely
|
|
# https://bugzilla.redhat.com/show_bug.cgi?id=2094137 . soft fail
|
|
# and reboot. this won't work if we need to decrypt or handle boot
|
|
# args, but I don't think anything that calls this needs it
|
|
record_soft_failure "No console on exit from Firefox, probably RHBZ #2094137";
|
|
power "reset";
|
|
boot_to_login_screen;
|
|
console_login(user => "root", password => get_var("ROOT_PASSWORD"));
|
|
}
|
|
|
|
sub start_with_launcher {
|
|
# Get the name of the needle with a launcher, find the launcher in the menu
|
|
# and click on it to start the application. This function works for the
|
|
# Gnome desktop.
|
|
|
|
# $launcher holds the launcher needle, but some of the apps are hidden in a submenu
|
|
# so this must be handled first to find the launcher needle.
|
|
|
|
my ($launcher, $submenu, $group) = @_;
|
|
$submenu //= '';
|
|
$group //= '';
|
|
my $desktop = get_var('DESKTOP');
|
|
|
|
my $item_to_check = $submenu || $launcher;
|
|
# The following varies for different desktops.
|
|
if ($desktop eq 'gnome') {
|
|
# Start the Activities page
|
|
send_key 'super';
|
|
wait_still_screen 5;
|
|
|
|
# Click on the menu icon to come into the menus
|
|
assert_and_click 'overview_app_grid';
|
|
wait_still_screen 5;
|
|
|
|
# Find the application launcher in the current menu page.
|
|
# If it cannot be found there, hit PageDown to go to another page.
|
|
|
|
send_key_until_needlematch($item_to_check, 'pgdn', 5, 3);
|
|
|
|
# If there was a submenu, click on that first.
|
|
if ($submenu) {
|
|
assert_and_click $submenu;
|
|
wait_still_screen 5;
|
|
}
|
|
# Click on the launcher
|
|
if (!check_screen($launcher)) {
|
|
# On F33+, this subwindow thingy scrolls horizontally,
|
|
# but only after we hit 'down' twice to get into it.
|
|
send_key 'down';
|
|
send_key 'down';
|
|
send_key_until_needlematch($launcher, 'right', 5, 6);
|
|
}
|
|
assert_and_click $launcher;
|
|
wait_still_screen 5;
|
|
}
|
|
elsif ($desktop eq 'kde') {
|
|
# Click on the KDE launcher icon
|
|
assert_and_click 'kde_menu_launcher';
|
|
wait_still_screen 2;
|
|
|
|
# Select the appropriate submenu
|
|
assert_and_click $submenu;
|
|
wait_still_screen 2;
|
|
|
|
# Select the appropriate menu subgroup where real launchers
|
|
# are placed, but only if requested
|
|
if ($group) {
|
|
send_key_until_needlematch($group, 'down', 20, 3);
|
|
send_key 'ret';
|
|
#assert_and_click $group;
|
|
wait_still_screen 2;
|
|
}
|
|
|
|
# Find and click on the menu item to start the application
|
|
send_key_until_needlematch($launcher, 'down', 40, 3);
|
|
send_key 'ret';
|
|
wait_still_screen 5;
|
|
}
|
|
}
|
|
|
|
|
|
sub quit_with_shortcut {
|
|
# Quit the application using the Alt-F4 keyboard shortcut
|
|
send_key 'alt-f4';
|
|
wait_still_screen 5;
|
|
assert_screen 'workspace';
|
|
|
|
}
|
|
|
|
# For update tests (this only works if we've been through
|
|
# _repo_setup_updates), figure out which packages from the update
|
|
# are currently installed. This is here so we can do it both in
|
|
# _advisory_post and post_fail_hook.
|
|
sub advisory_get_installed_packages {
|
|
# bail out if the file doesn't exist: this is in case we get
|
|
# here in the post-fail hook but we failed before creating it
|
|
return if script_run "test -f /mnt/updatepkgs.txt";
|
|
assert_script_run 'rpm -qa --qf "%{SOURCERPM} %{NAME} %{EPOCHNUM} %{VERSION} %{RELEASE}\n" | sort -u > /tmp/allpkgs.txt', timeout => 90;
|
|
# this finds lines which appear in both files
|
|
# http://www.unix.com/unix-for-dummies-questions-and-answers/34549-find-matching-lines-between-2-files.html
|
|
if (script_run 'comm -12 /tmp/allpkgs.txt /mnt/updatepkgs.txt > /mnt/testedpkgs.txt') {
|
|
# occasionally, for some reason, it's unhappy about sorting;
|
|
# we shouldn't fail the test in this case, just upload the
|
|
# files so we can see why...
|
|
upload_logs "/tmp/allpkgs.txt", failok => 1;
|
|
upload_logs "/mnt/updatepkgs.txt", failok => 1;
|
|
}
|
|
# we'll try and upload the output even if comm 'failed', as it
|
|
# does in fact still write it in some cases
|
|
upload_logs "/mnt/testedpkgs.txt", failok => 1;
|
|
}
|
|
|
|
sub advisory_check_nonmatching_packages {
|
|
# For update tests (this only works if we've been through
|
|
# _repo_setup_updates), figure out if we have a different version
|
|
# of any package from the update installed - this indicates a
|
|
# problem, it likely means a dep issue meant dnf installed an
|
|
# older version from the frozen release repo
|
|
my %args = (
|
|
fatal => 1,
|
|
@_
|
|
);
|
|
# bail out if the file doesn't exist: this is in case we get
|
|
# here in the post-fail hook but we failed before creating it
|
|
return if script_run "test -f /mnt/updatepkgnames.txt";
|
|
# if this fails in advisory_post, we don't want to do it *again*
|
|
# unnecessarily in post_fail_hook
|
|
return if (get_var("_ACNMP_DONE"));
|
|
script_run 'touch /tmp/installedupdatepkgs.txt';
|
|
# this creates /tmp/installedupdatepkgs.txt as a sorted list of installed
|
|
# packages with the same name as packages from the update, in the same form
|
|
# as /mnt/updatepkgs.txt. The '--last | head -1' tries to handle the
|
|
# problem of installonly packages like the kernel, where we wind up with
|
|
# *multiple* versions installed after the update; the first line of output
|
|
# for any given package with --last is the most recent version, i.e. the
|
|
# one in the update. The sed replaces the caret - "^" - with "\^" (literal
|
|
# slash then a caret) in the package NVRA; this is necessary to workaround
|
|
# a bug in RPM - https://bugzilla.redhat.com/show_bug.cgi?id=2002038 . It
|
|
# can be removed when that bug is fixed. Yes, it really needs eight slashes
|
|
# (we need four to reach bash, and half of them get eaten by perl or
|
|
# something along the way). Yes, it only works with *single* quotes. Yes,
|
|
# I hate escaping
|
|
script_run 'for pkg in $(cat /mnt/updatepkgnames.txt); do rpm -q $pkg && rpm -q $pkg --last | head -1 | cut -d" " -f1 | sed -e \'s,\^,\\\\\\\\^,g\' | xargs rpm -q --qf "%{SOURCERPM} %{NAME} %{EPOCHNUM} %{VERSION} %{RELEASE}\n" >> /tmp/installedupdatepkgs.txt; done', timeout => 180;
|
|
script_run 'sort -u -o /tmp/installedupdatepkgs.txt /tmp/installedupdatepkgs.txt';
|
|
# for debugging, may as well always upload these, can't hurt anything
|
|
upload_logs "/tmp/installedupdatepkgs.txt", failok => 1;
|
|
upload_logs "/mnt/updatepkgs.txt", failok => 1;
|
|
# download the check script and run it
|
|
assert_script_run 'curl -o updvercheck.py https://pagure.io/fedora-qa/os-autoinst-distri-fedora/raw/main/f/updvercheck.py', timeout => 120;
|
|
my $advisory = get_var("ADVISORY");
|
|
my $cmd = 'python3 ./updvercheck.py /mnt/updatepkgs.txt /tmp/installedupdatepkgs.txt';
|
|
$cmd .= " $advisory" if ($advisory);
|
|
my $ret = script_run $cmd;
|
|
# 2 is warnings only, 3 is problems, 1 means the script died in
|
|
# some other way (probably a bug)
|
|
if ($ret == 2) {
|
|
record_soft_failure "Some update package(s) not installed, but this is probably OK, see script output";
|
|
}
|
|
if ($ret == 1 || $ret == 3) {
|
|
my $message = "Package(s) from update not installed when it should have been! See script output";
|
|
$message = "Script failed unexpectedly!" if ($ret == 1);
|
|
if ($args{fatal}) {
|
|
set_var("_ACNMP_DONE", "1");
|
|
die $message;
|
|
}
|
|
else {
|
|
# if we're already in post_fail_hook, we don't want to die again
|
|
record_info $message;
|
|
}
|
|
}
|
|
}
|
|
|
|
sub select_rescue_mode {
|
|
# handle bootloader screen
|
|
assert_screen "bootloader", 30;
|
|
if (get_var('OFW')) {
|
|
# select "rescue system" directly
|
|
send_key "down";
|
|
send_key "down";
|
|
send_key "ret";
|
|
}
|
|
else {
|
|
# select troubleshooting
|
|
send_key "down";
|
|
send_key "ret";
|
|
# select "rescue system"
|
|
if (get_var('UEFI')) {
|
|
send_key "down";
|
|
# we need this on aarch64 till #1661288 is resolved
|
|
if (get_var('ARCH') eq 'aarch64') {
|
|
send_key "e";
|
|
# duped with do_bootloader, sadly...
|
|
for (1 .. 50) {
|
|
send_key 'down';
|
|
}
|
|
sleep 1;
|
|
send_key 'up';
|
|
sleep 1;
|
|
send_key 'up';
|
|
send_key "end";
|
|
type_safely " console=tty0";
|
|
send_key "ctrl-x";
|
|
}
|
|
else {
|
|
send_key "ret";
|
|
}
|
|
}
|
|
else {
|
|
type_string "r\n";
|
|
}
|
|
}
|
|
|
|
assert_screen "rescue_select", 180; # it takes time to start anaconda
|
|
}
|
|
|
|
sub copy_devcdrom_as_isofile {
|
|
# copy /dev/cdrom as iso file and verify checksum is same
|
|
# as cdrom previously retrieved from ISO_URL
|
|
my $isoname = shift;
|
|
assert_script_run "dd if=/dev/cdrom of=$isoname", 360;
|
|
# verify iso checksum
|
|
my $cdurl = get_var('ISO_URL');
|
|
# ISO_URL may not be set if we POSTed manually or something; just assume
|
|
# we're OK in that case
|
|
return unless $cdurl;
|
|
my $cmd = <<EOF;
|
|
urld="$cdurl"; urld=\${urld%/*}; chkf=\$(curl -fs \$urld/ |grep CHECKSUM | sed -E 's/.*href=.//; s/\".*//') && curl -f \$urld/\$chkf -o /tmp/x
|
|
chkref=\$(grep -E 'SHA256.*dvd' /tmp/x | sed -e 's/.*= //') && echo "\$chkref $isoname" >/tmp/x
|
|
sha256sum -c /tmp/x
|
|
EOF
|
|
assert_script_run($_) foreach (split /\n/, $cmd);
|
|
}
|
|
|
|
sub menu_launch_type {
|
|
# Launch an application in a graphical environment, by opening a
|
|
# launcher, typing the specified string and hitting enter. Pass
|
|
# the string to be typed to launch whatever it is you want.
|
|
my $app = shift;
|
|
# To overcome BZ2097208, let's move the mouse out of the way
|
|
# and give the launcher some time to take the correct focus.
|
|
if (get_var("DESKTOP") eq "kde") {
|
|
diag("Moving the mouse away from the launcher.");
|
|
mouse_set(1, 1);
|
|
}
|
|
send_key 'super';
|
|
# srsly KDE y u so slo
|
|
wait_still_screen 3;
|
|
type_very_safely $app;
|
|
# Wait for KDE to place focus correctly.
|
|
sleep 2;
|
|
send_key 'ret';
|
|
}
|
|
|
|
sub tell_source {
|
|
# This helper function identifies the Subvariant of the tested system.
|
|
# For the purposes of identification testing, we are only interested
|
|
# if the system is Workstation, Server, or something else, because,
|
|
# except Workstation and Server, there are no graphical differences
|
|
# between various spins and isos.
|
|
my $iso = get_var('SUBVARIANT');
|
|
$iso = lc($iso);
|
|
if ($iso eq 'workstation' or $iso eq 'server') {
|
|
# do nothing, but don't hit else
|
|
}
|
|
elsif ($iso eq 'atomichost') {
|
|
$iso = 'atomic';
|
|
}
|
|
elsif ($iso eq 'silverblue') {
|
|
$iso = 'workstation';
|
|
}
|
|
else {
|
|
$iso = 'generic';
|
|
}
|
|
return $iso;
|
|
}
|
|
|
|
sub check_left_bar {
|
|
# This method is used by identification tests to check whether the Anaconda
|
|
# bar on the left side of the screen corresponds with the correct version.
|
|
# It looks different for Server, Workstation and others.
|
|
my $source = tell_source;
|
|
assert_screen "leftbar_${source}";
|
|
}
|
|
|
|
sub check_top_bar {
|
|
# This method is used by identification tests to check whether the
|
|
# top bar in Anaconda corresponds with the correct version of the spin.
|
|
my $source = tell_source;
|
|
assert_screen "topbar_${source}";
|
|
}
|
|
|
|
sub check_prerelease {
|
|
# This method is used by identification tests to check if
|
|
# Anaconda shows the PRERELEASE tag on various screens. These are
|
|
# the rules anaconda follows for deciding whether to do this, as
|
|
# of 2020-05-07:
|
|
|
|
# 1. If there's a /.buildstamp and/or /tmp/product/.buildstamp file
|
|
# the installer environment, and/or the environment variable
|
|
# PRODBUILDPATH is set and points to a file that exists, it reads
|
|
# config from those file(s), in that order of precedence, and if
|
|
# the key 'IsFinal' exists in the section 'Main', its value is
|
|
# used as anaconda's `product.isFinal`. Installer images built by
|
|
# lorax have this buildstamp file, and it always sets IsFinal: if
|
|
# --isfinal was passed to lorax it is set to True, if not it is set
|
|
# to False. Whether lorax is run with --isfinal can be specified
|
|
# in the Pungi config, but there's also a heuristic: it usually
|
|
# defaults to False, but if the compose has a label and it's an
|
|
# 'RC' or 'Update' or 'SecurityFix' compose (see definition of
|
|
# SUPPORTED_MILESTONES in productmd.composeinfo), the default is
|
|
# True. AFAICS, Fedora's pungi configs don't explicitly set this,
|
|
# but rely on the heuristic. So for installer images, we expect
|
|
# isFinal to be True for RC candidate composes and post-release
|
|
# nightly Cloud, IoT etc. composes (these are also marked as 'RC'
|
|
# composes), but False for Rawhide and Branched nightly composes
|
|
# and Beta candidate composes. For installer images built by our
|
|
# own _installer_build test, we control whether --isfinal is set
|
|
# or not; we pass it if the update is for a stable release, we do
|
|
# not pass it if the update is for Branched. Live images do not
|
|
# have the buildstamp file.
|
|
|
|
# 2. If there's no buildstamp file, the value of the environment
|
|
# variable ANACONDA_ISFINAL is used as `product.isFinal`, default
|
|
# of False if that environment var is not set. The live installer
|
|
# wrapper script sets ANACONDA_ISFINAL based on the release field
|
|
# of whatever package provides system-release: if it starts with
|
|
# "0.", it sets ANACONA_ISFINAL to "false", otherwise it sets it
|
|
# to "true". So for live images, we expect isFinal to be True
|
|
# unless the fedora-release-common package release starts with 0.
|
|
|
|
# 3. If `product.isFinal` is False, the pre-release warning and
|
|
# tags are shown; if it is False, they are not shown.
|
|
|
|
# We don't really need to check this stuff for update tests, as
|
|
# the only installer images we test on updates are ones we build
|
|
# ourselves; there's no value to this check for those really.
|
|
# For compose tests, we will expect to see the pre-release tags if
|
|
# the compose is Rawhide, or a Beta candidate, or it's a nightly
|
|
# and we're checking an installer image. If it's an RC or Updates
|
|
# candidate, or a respin release, we expect NOT to see the tags.
|
|
# If it's a nightly and we're checking a live image, we don't do
|
|
# the check.
|
|
|
|
# bail if this is an update test
|
|
return if (get_var("ADVISORY_OR_TASK"));
|
|
|
|
# 0 means "tags MUST NOT be shown", 1 means "tags MUST be shown",
|
|
# any other value means we don't care
|
|
my $prerelease = 10;
|
|
|
|
# if this is RC or update compose we absolutely *MUST NOT* see tags
|
|
my $label = get_var("LABEL");
|
|
$prerelease = 0 if ($label =~ /^(RC|Update)-/);
|
|
# if it's a Beta compose we *MUST* see tags
|
|
$prerelease = 1 if ($label =~ /^Beta-/);
|
|
my $version = get_var('VERSION');
|
|
# if it's Rawhide we *MUST* see tags
|
|
$prerelease = 1 if ($version eq "Rawhide");
|
|
my $build = get_var('BUILD');
|
|
# if it's a nightly installer image we should see tags
|
|
$prerelease = 1 if ($build =~ /\.n\.\d+/ && !get_var("LIVE"));
|
|
# if it's a respin compose we *MUST NOT* see tags
|
|
$prerelease = 0 if ($build =~ /Respin/);
|
|
# we *could* go to a console and parse fedora-release-common
|
|
# to decide if a nightly live image should have tags or not, but
|
|
# it seems absurd as we're almost reinventing the code that
|
|
# decides whether to show the tags, at that point, and it's not
|
|
# really a big deal either way whether a nightly live image has
|
|
# the tags or not. So we don't.
|
|
|
|
# For all prerelease requiring ISOs, assert that prerelease is there.
|
|
if ($prerelease == 1) {
|
|
assert_screen "prerelease_note";
|
|
}
|
|
elsif ($prerelease == 0) {
|
|
# If the prerelease note is shown, where it should not be, die!
|
|
if (check_screen "prerelease_note") {
|
|
die "The PRERELEASE tag is shown, but it should NOT be.";
|
|
}
|
|
}
|
|
}
|
|
|
|
sub check_version {
|
|
# This function checks if the correct version is display during installation
|
|
# in Anaconda, i.e. nonlive media showing Rawhide when Rawhide and version numbers
|
|
# when not Rawhide, while live media always showing version numbers.
|
|
|
|
my $version = lc(get_var('VERSION'));
|
|
if ($version eq 'rawhide' && get_var('LIVE')) {
|
|
$version = get_var('RAWREL');
|
|
}
|
|
assert_screen "version_${version}_ident";
|
|
}
|
|
|
|
sub spell_version_number {
|
|
my $version = shift;
|
|
# spelt version of Rawhide is...Rawhide
|
|
return "Rawhide" if ($version eq 'Rawhide');
|
|
my %ones = (
|
|
"0" => "Zero",
|
|
"1" => "One",
|
|
"2" => "Two",
|
|
"3" => "Three",
|
|
"4" => "Four",
|
|
"5" => "Five",
|
|
"6" => "Six",
|
|
"7" => "Seven",
|
|
"8" => "Eight",
|
|
"9" => "Nine",
|
|
);
|
|
my %tens = (
|
|
"2" => "Twenty",
|
|
"3" => "Thirty",
|
|
"4" => "Fourty",
|
|
"5" => "Fifty",
|
|
"6" => "Sixty",
|
|
"7" => "Seventy",
|
|
"8" => "Eighty",
|
|
"9" => "Ninety",
|
|
);
|
|
|
|
my $ten = substr($version, 0, 1);
|
|
my $one = substr($version, 1, 1);
|
|
my $speltnum = "";
|
|
if ($one eq "0") {
|
|
$speltnum = "$tens{$ten}";
|
|
}
|
|
else {
|
|
$speltnum = "$tens{$ten} $ones{$one}";
|
|
}
|
|
return $speltnum;
|
|
}
|
|
|
|
sub rec_log {
|
|
my ($line, $condition, $failref, $filename) = @_;
|
|
$filename ||= '/tmp/os-release.log';
|
|
if ($condition) {
|
|
$line = "${line} - SUCCEEDED\n";
|
|
}
|
|
else {
|
|
push @$failref, $line;
|
|
$line = "${line} - FAILED\n";
|
|
}
|
|
script_run "echo \"$line\" >> $filename";
|
|
|
|
}
|
|
|
|
sub click_unwanted_notifications {
|
|
# there are a few KDE tests where at some point we want to click
|
|
# on all visible 'update available' notifications (there can be
|
|
# more than one, thanks to
|
|
# https://bugzilla.redhat.com/show_bug.cgi?id=1730482 ) and the
|
|
# buggy 'akonadi_migration_agent_running' popup if it's showing -
|
|
# https://bugzilla.redhat.com/show_bug.cgi?id=1716005
|
|
# Returns an array indicating which notifications it closed
|
|
wait_still_screen 5;
|
|
my $count = 10;
|
|
my @closed;
|
|
while ($count > 0 && check_screen "desktop_update_notification_popup", 5) {
|
|
$count -= 1;
|
|
push(@closed, 'update');
|
|
click_lastmatch;
|
|
}
|
|
if (check_screen "akonadi_migration_agent_running", 5) {
|
|
click_lastmatch;
|
|
push(@closed, 'akonadi');
|
|
}
|
|
return @closed;
|
|
}
|
|
|
|
# In each application test, when the application is started successfully, it
|
|
# will register to the list of applications.
|
|
sub register_application {
|
|
my $application = shift;
|
|
push(@application_list, $application);
|
|
print("APPLICATION REGISTERED: $application \n");
|
|
}
|
|
|
|
# The KDE desktop tests are very difficult to maintain, because the transparency
|
|
# of the menu requires a lot of different needles to cover the elements.
|
|
# Therefore it is useful to change the background to a solid colour.
|
|
# Since many needles have been already created with a black background
|
|
# we will keep it that way. The following code has been taken from the
|
|
# KDE startstop tests but it is good to have it here, because it will be
|
|
# needed more often now, it seems.
|
|
sub solidify_wallpaper {
|
|
my $desktop = get_var("DESKTOP");
|
|
if ($desktop eq "kde") {
|
|
# Run the Desktop settings
|
|
# FIXME workaround a weird bug where alt-d-s does something
|
|
# different until you right click on the desktop:
|
|
# https://bugzilla.redhat.com/show_bug.cgi?id=1933118
|
|
# Fixed as of 2022-04-29 Rawhide (F37), can be removed at
|
|
# least when F36 goes EOL (didn't test F35 or F36)
|
|
mouse_set 512, 384;
|
|
mouse_click 'right';
|
|
mouse_set 480, 384;
|
|
mouse_click 'left';
|
|
hold_key 'alt';
|
|
send_key 'd';
|
|
send_key 's';
|
|
release_key 'alt';
|
|
# give the window a few seconds to stabilize
|
|
wait_still_screen 3;
|
|
# Select type of background
|
|
assert_and_click "deskset_select_type";
|
|
wait_still_screen 2;
|
|
# Select plain color type
|
|
assert_and_click "deskset_plain_color";
|
|
wait_still_screen 2;
|
|
# Open colors selection
|
|
assert_and_click "deskset_select_color";
|
|
wait_still_screen 2;
|
|
# Select black
|
|
assert_and_click "deskset_select_black";
|
|
wait_still_screen 2;
|
|
# Confirm
|
|
assert_and_click "kde_ok";
|
|
wait_still_screen 2;
|
|
# Close the application
|
|
assert_and_click "kde_ok";
|
|
}
|
|
elsif ($desktop eq "gnome") {
|
|
# Start the terminal to set up backgrounds.
|
|
menu_launch_type "gnome-terminal";
|
|
# wait to be sure it's fully open
|
|
wait_still_screen(stilltime => 5, similarity_level => 38);
|
|
# When the application opens, run command in it to set the background to black
|
|
type_very_safely "gsettings set org.gnome.desktop.background picture-uri ''";
|
|
send_key 'ret';
|
|
wait_still_screen(stilltime => 2, similarity_level => 38);
|
|
type_very_safely "gsettings set org.gnome.desktop.background primary-color '#000000'";
|
|
send_key 'ret';
|
|
wait_still_screen(stilltime => 2, similarity_level => 38);
|
|
quit_with_shortcut();
|
|
# check that is has changed color
|
|
assert_screen 'apps_settings_screen_black';
|
|
}
|
|
}
|
|
|
|
# This routine is used in Desktop test suites, such as Evince or Gedit.
|
|
# It checks if git is installed and installs it, if necessary.
|
|
sub check_and_install_git {
|
|
unless (get_var("CANNED")) {
|
|
if (script_run("rpm -q git")) {
|
|
assert_script_run("dnf install -y git");
|
|
}
|
|
}
|
|
}
|
|
|
|
# This routine is used in Desktop test suites. It downloads the test data from
|
|
# the repository and populates the directory structure.
|
|
# The data repository is located at https://pagure.io/fedora-qa/openqa_testdata.
|
|
|
|
sub download_testdata {
|
|
# Navigate to the user's home directory
|
|
my $user = get_var("USER_LOGIN") // "test";
|
|
assert_script_run("cd /home/$user/");
|
|
# Create a temporary directory to unpack the zipped file.
|
|
assert_script_run("mkdir temp");
|
|
assert_script_run("cd temp");
|
|
# Download the compressed file with the repository content.
|
|
assert_script_run("wget https://pagure.io/fedora-qa/openqa_testdata/blob/thetree/f/repository.tar.gz", timeout => 120);
|
|
# Untar it.
|
|
assert_script_run("tar -zxvf repository.tar.gz");
|
|
# Copy out the files into the VMs directory structure.
|
|
assert_script_run("cp music/* /home/$user/Music");
|
|
assert_script_run("cp documents/* /home/$user/Documents");
|
|
assert_script_run("cp pictures/* /home/$user/Pictures");
|
|
assert_script_run("cp video/* /home/$user/Videos");
|
|
assert_script_run("cp reference/* /home/$user/");
|
|
# Delete the temporary directory and the downloaded file.
|
|
assert_script_run("cd");
|
|
assert_script_run("rm -rf /home/$user/temp");
|
|
# Change ownership
|
|
assert_script_run("chown -R test:test /home/$user/");
|
|
}
|
|
|
|
# On Fedora, the serial console is not writable for regular users which lames
|
|
# some of the openQA commands that send messages to the serial console to check
|
|
# that a command has finished, for example assert_script_run, etc.
|
|
# This routine changes the rights on the serial console file and makes it
|
|
# writable for everyone, so that those commands work. This is actually very useful
|
|
# for testing commands from users' perspective. The routine also handles becoming the root.
|
|
# We agree that this is not the "correct" way, to enable users to type onto serial console
|
|
# and that it correctly should be done via groups (dialout) but that would require rebooting
|
|
# the virtual machine. Therefore we do it this way, which has immediate effect.
|
|
sub make_serial_writable {
|
|
become_root();
|
|
sleep 2;
|
|
# Make serial console writable for everyone.
|
|
enter_cmd("chmod 666 /dev/${serialdev}");
|
|
sleep 2;
|
|
# Exit the root account
|
|
enter_cmd("exit");
|
|
sleep 2;
|
|
}
|
|
|
|
1;
|