mirror of
https://pagure.io/fedora-qa/os-autoinst-distri-fedora.git
synced 2024-11-14 02:34:21 +00:00
03b6663339
This is like the existing tests that build network install and live images then install them, only for Silverblue. First we build an ostree, using the standard configuration for the release and subvariant but with the 'advisory' and 'workarounds' repos included, so it will contain current stable packages plus the packages from the update and any workarounds. Then we build an ostree installer image with the ostree embedded, again including advisory and workarounds repos in the installer build config so packages from them will be included in the installer environment. The image is uploaded, which completes the _ostree_build test. Then an install_default_update_ostree test runs, which does a standard install and boot from the installer image. We do make a change that affects other tests, too. We now run _advisory_post on live image install tests, as well as this new ostree install image install test. It was skipped before because of an exception that's really only needed for the netinst image install test. In that test, packages from the update won't be included in the installed system, so we can't run _advisory_post on it. But for ostree and live image build/install tests, the installed system *should* include packages from the update, so we should check and make sure that it does. Signed-off-by: Adam Williamson <awilliam@redhat.com>
439 lines
17 KiB
Perl
439 lines
17 KiB
Perl
# Copyright (C) 2014 SUSE Linux GmbH
|
|
# Copyright Red Hat
|
|
#
|
|
# This file is part of os-autoinst-distri-fedora.
|
|
#
|
|
# os-autoinst-distri-fedora is free software; you can redistribute it
|
|
# and/or modify it under the terms of the GNU General Public License
|
|
# as published by the Free Software Foundation, either version 2 of
|
|
# the License, or (at your option) any later version.
|
|
#
|
|
# This program is distributed in the hope that it will be useful,
|
|
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
# GNU General Public License for more details.
|
|
#
|
|
# You should have received a copy of the GNU General Public License
|
|
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
use strict;
|
|
use testapi;
|
|
use autotest;
|
|
use needle;
|
|
use File::Basename;
|
|
|
|
# distribution-specific implementations of expected methods
|
|
my $distri = testapi::get_var("CASEDIR") . '/lib/fedoradistribution.pm';
|
|
require $distri;
|
|
testapi::set_distribution(fedoradistribution->new());
|
|
|
|
## UTILITY SUBROUTINES
|
|
|
|
|
|
# Stolen from openSUSE.
|
|
sub unregister_needle_tags($) {
|
|
my $tag = shift;
|
|
my @a = @{needle::tags($tag)};
|
|
for my $n (@a) { $n->unregister(); }
|
|
}
|
|
|
|
# The purpose of this function is to un-register all needles which have
|
|
# at least one tag that starts with a given string (the 'prefix'), if
|
|
# it does not have any tag that matches the pattern 'prefix-value', for
|
|
# any of the values given in an array. The first argument passed must
|
|
# be the prefix; the second must be a reference to the array of values.
|
|
# For instance, if the 'prefix' is LANGUAGE and the 'values' are
|
|
# ENGLISH and FRENCH, this function would un-reference a needle which
|
|
# had only the tag 'LANGUAGE-DUTCH', but it would keep a needle which
|
|
# had the tag 'LANGUAGE-ENGLISH', or a needle with no tag starting in
|
|
# 'LANGUAGE-' at all.
|
|
sub unregister_prefix_tags {
|
|
my ($prefix, $valueref) = @_;
|
|
NEEDLE: for my $needle (needle::all()) {
|
|
my $unregister = 0;
|
|
for my $tag (@{$needle->{'tags'}}) {
|
|
if ($tag =~ /^\Q$prefix/) {
|
|
# We have at least one tag matching the prefix, so we
|
|
# *MAY* want to un-register the needle
|
|
$unregister = 1;
|
|
for my $value (@{$valueref}) {
|
|
# At any point if we hit a prefix-value match, we
|
|
# know we need to keep this needle and can skip
|
|
# to the next
|
|
next NEEDLE if ($tag eq "$prefix-$value");
|
|
}
|
|
}
|
|
}
|
|
# We get here if we hit no prefix-value match, but we only want
|
|
# to unregister the needle if we hit any prefix match, i.e. if
|
|
# 'unregister' is 1.
|
|
$needle->unregister() if ($unregister);
|
|
}
|
|
}
|
|
|
|
sub cleanup_needles() {
|
|
if (!get_var('LIVE') and !get_var('CANNED')) {
|
|
## Unregister smaller hub needles. Live and 'canned' installers have
|
|
## a smaller hub with no repository spokes. On other images we want
|
|
## to wait for repository setup to complete, but if we match that
|
|
## spoke's "ready" icon, it breaks live and canned because they
|
|
## don't have that spoke. So we have a needle which doesn't match
|
|
## on that icon, but we unregister it for other installs so they
|
|
## don't match on it too soon.
|
|
unregister_needle_tags("INSTALLER-smallhub");
|
|
}
|
|
|
|
# Unregister desktop needles of other desktops when DESKTOP is specified
|
|
if (get_var('DESKTOP')) {
|
|
unregister_prefix_tags('DESKTOP', [get_var('DESKTOP')]);
|
|
}
|
|
|
|
# Unregister non-language-appropriate needles. See unregister_except_
|
|
# tags for details; basically all needles with at least one LANGUAGE-
|
|
# tag will be unregistered unless they match the current langauge.
|
|
my $langref = [get_var('LANGUAGE') || 'english'];
|
|
unregister_prefix_tags('LANGUAGE', $langref);
|
|
}
|
|
$needle::cleanuphandler = \&cleanup_needles;
|
|
|
|
## TEST LOADING SUBROUTINES
|
|
|
|
|
|
sub load_upgrade_tests() {
|
|
# all upgrade tests include: boot phase (where bootloader and
|
|
# encryption are handled if necessary), preinstall phase (where
|
|
# packages are upgraded and dnf-plugin-system-upgrade installed),
|
|
# run phase (where upgrade is run) and postinstall phase (where
|
|
# is checked if fedora was upgraded successfully). The PREUPGRADE
|
|
# variable can be used to specify additional test modules to run
|
|
# after the preinstall phase but before the run phase, and the
|
|
# POSTINSTALL variable can be used to specify additional test
|
|
# modules to run after the upgrade postinstall phase.
|
|
autotest::loadtest "tests/upgrade_boot.pm";
|
|
# if static networking config is needed we must do it at this point
|
|
if (get_var("POST_STATIC")) {
|
|
autotest::loadtest "tests/_post_network_static.pm";
|
|
}
|
|
autotest::loadtest "tests/upgrade_preinstall.pm";
|
|
# generic pre-upgrade test load
|
|
if (get_var("PREUPGRADE")) {
|
|
my @pus = split(/ /, get_var("PREUPGRADE"));
|
|
foreach my $pu (@pus) {
|
|
autotest::loadtest "tests/${pu}.pm";
|
|
}
|
|
}
|
|
autotest::loadtest "tests/upgrade_run.pm";
|
|
# handle additional postinstall tests
|
|
if (get_var("POSTINSTALL")) {
|
|
set_var('POSTINSTALL', "upgrade_postinstall " . get_var("POSTINSTALL"));
|
|
}
|
|
else {
|
|
set_var('POSTINSTALL', "upgrade_postinstall");
|
|
}
|
|
}
|
|
|
|
sub load_install_tests() {
|
|
# CoreOS is special, so we handle that here
|
|
if (get_var("SUBVARIANT") eq "CoreOS") {
|
|
autotest::loadtest "tests/_coreos_install.pm";
|
|
return;
|
|
}
|
|
# normal installation test consists of several phases, from which some of them are
|
|
# loaded automatically and others are loaded based on what env variables are set
|
|
|
|
# generally speaking, install test consists of: boot phase, customization phase, installation
|
|
# and reboot phase, postinstall phase
|
|
|
|
# boot phase is loaded automatically every time
|
|
autotest::loadtest "tests/_boot_to_anaconda.pm";
|
|
|
|
# if this is a kickstart or VNC install, that's all folks
|
|
return if (get_var("KICKSTART") || get_var("VNC_SERVER"));
|
|
|
|
# Root password and user creation spokes are suppressed on
|
|
# Workstation live install and Silverblue DVD install, so we do
|
|
# not want to try and use them. Setting this in the templates is
|
|
# tricky as it gets set for post-install tests too that way, and
|
|
# we don't want that
|
|
if ((get_var('LIVE') || get_var('CANNED')) && get_var('DESKTOP') eq 'gnome') {
|
|
set_var('INSTALLER_NO_ROOT', '1');
|
|
# this is effectively a forced install_no_user
|
|
set_var('INSTALL_NO_USER', '1');
|
|
}
|
|
|
|
if (get_var('ANACONDA_TEXT')) {
|
|
# since it differs much, handle text installation separately
|
|
autotest::loadtest "tests/install_text.pm";
|
|
return;
|
|
}
|
|
|
|
## Networking
|
|
if (get_var('ANACONDA_STATIC')) {
|
|
autotest::loadtest "tests/_anaconda_network_static.pm";
|
|
}
|
|
|
|
## Installation source
|
|
if (get_var('MIRRORLIST_GRAPHICAL') || get_var("REPOSITORY_GRAPHICAL") || get_var("ADD_REPOSITORY_GRAPHICAL")) {
|
|
autotest::loadtest "tests/install_source_graphical.pm";
|
|
autotest::loadtest "tests/_check_install_source.pm";
|
|
}
|
|
if (get_var("REPOSITORY_VARIATION") || get_var("ADD_REPOSITORY_VARIATION")) {
|
|
autotest::loadtest "tests/_check_install_source.pm";
|
|
}
|
|
|
|
## Select package set. Minimal is the default, if 'default' is specified, skip selection.
|
|
autotest::loadtest "tests/_software_selection.pm";
|
|
|
|
## Disk partitioning.
|
|
# If PARTITIONING is set, we pick the storage test
|
|
# to run based on the value (usually we run the test with the name
|
|
# that matches the value, except for a couple of commented cases).
|
|
my $storage = '';
|
|
my $partitioning = get_var('PARTITIONING');
|
|
# if PARTITIONING is unset, or one of [...], use disk_guided_empty,
|
|
# which is the simplest / 'default' case.
|
|
if (!$partitioning || $partitioning ~~ ['guided_empty', 'guided_free_space']) {
|
|
$storage = "tests/disk_guided_empty.pm";
|
|
}
|
|
else {
|
|
$storage = "tests/disk_" . $partitioning . ".pm";
|
|
}
|
|
autotest::loadtest $storage;
|
|
|
|
if (get_var("ENCRYPT_PASSWORD")) {
|
|
autotest::loadtest "tests/disk_guided_encrypted.pm";
|
|
}
|
|
|
|
# Start installation, set user & root passwords, reboot
|
|
# install and reboot phase is loaded automatically every time (except when KICKSTART is set)
|
|
autotest::loadtest "tests/_do_install_and_reboot.pm";
|
|
}
|
|
|
|
sub _load_instance {
|
|
# loads a specific 'instance' of a given test. See next function
|
|
# for more details.
|
|
my ($test, $instance) = @_;
|
|
$test .= "_${instance}" if $instance;
|
|
autotest::loadtest "${test}.pm";
|
|
}
|
|
|
|
sub _load_early_postinstall_tests {
|
|
# Early post-install test loading. Split out as a separate sub
|
|
# because we do this all twice on update tests.
|
|
|
|
# openQA isn't very good at handling jobs where the same module
|
|
# is loaded more than once, and fixing that will be a bit complex
|
|
# and no-one got around to it yet. So for now, we use a bit of a
|
|
# hack: for modules we know may get loaded multiple times, we have
|
|
# symlinks named _2, _3 etc. This function can be passed an arg
|
|
# specifying which 'instance' of the tests to use.
|
|
my ($instance) = @_;
|
|
$instance //= 0;
|
|
|
|
# Unlock encrypted storage volumes, if necessary. The test name here
|
|
# follows the 'storage post-install' convention, but must be run earlier.
|
|
if (get_var("ENCRYPT_PASSWORD")) {
|
|
_load_instance("tests/disk_guided_encrypted_postinstall", $instance);
|
|
}
|
|
|
|
# For now, there's no possibility to get a graphical desktop on
|
|
# Modular composes, so short-circuit here for those
|
|
if (get_var("MODULAR")) {
|
|
_load_instance("tests/_console_wait_login", $instance);
|
|
return;
|
|
}
|
|
|
|
# Appropriate login method for install type
|
|
if (get_var("DESKTOP")) {
|
|
_load_instance("tests/_graphical_wait_login", $instance);
|
|
}
|
|
# Test non-US input at this point, on language tests
|
|
if (get_var("SWITCHED_LAYOUT") || get_var("INPUT_METHOD")) {
|
|
_load_instance("tests/_graphical_input", $instance);
|
|
}
|
|
|
|
if (get_var("LANGUAGE", "") eq "japanese" || get_var("LANGUAGE", "") eq "arabic") {
|
|
_load_instance("tests/check_default_fonts", $instance);
|
|
}
|
|
|
|
|
|
# We do not want to run this on Desktop installations or when
|
|
# the installation is interrupted on purpose.
|
|
unless (get_var("DESKTOP") || get_var("CRASH_REPORT")) {
|
|
_load_instance("tests/_console_wait_login", $instance);
|
|
}
|
|
}
|
|
|
|
sub load_postinstall_tests() {
|
|
# special case for the memory check test, as it doesn't need to boot
|
|
# the installed system: just load its test and return
|
|
if (get_var("MEMCHECK")) {
|
|
autotest::loadtest "tests/_memcheck.pm";
|
|
return;
|
|
}
|
|
# VNC client test's work is done once install is complete
|
|
if (get_var("VNC_CLIENT")) {
|
|
return;
|
|
}
|
|
|
|
# load the early tests
|
|
_load_early_postinstall_tests();
|
|
|
|
# do standard post-install static network config if the var is set
|
|
# and this is not an upgrade test (this is done elsewhere in the
|
|
# upgrade workflow)
|
|
# this is here not in early_postinstall_tests as there's no need
|
|
# to do it twice
|
|
if (get_var("POST_STATIC") && !get_var("UPGRADE")) {
|
|
autotest::loadtest "tests/_post_network_static.pm";
|
|
}
|
|
|
|
# if scheduler passed an advisory or task ID, update packages from that
|
|
# advisory or task ID (intended for the updates testing workflow, so we
|
|
# install the updates to be tested). Don't do this for UPGRADE tests, as
|
|
# the update gets installed as part of the upgrade in that case and we
|
|
# don't need the extra reboot. Don't do this for INSTALL test(s); these
|
|
# are checking that an installer image built from the update works and do
|
|
# not install the update themselves in this manner
|
|
if (get_var("ADVISORY_OR_TASK") && !get_var("UPGRADE") && !get_var("INSTALL")) {
|
|
autotest::loadtest "tests/_advisory_update.pm";
|
|
# now load the early boot tests again, as _advisory_update reboots
|
|
_load_early_postinstall_tests(2);
|
|
}
|
|
# from now on, we have fully installed and booted system with root/specified user logged in
|
|
|
|
# If there is a post-install test to verify storage configuration worked
|
|
# correctly, run it. Again we determine the test name based on the value
|
|
# of PARTITIONING
|
|
my $storagepost = '';
|
|
if (get_var('PARTITIONING')) {
|
|
my $casedir = get_var("CASEDIR");
|
|
my $loc = "tests/disk_" . get_var('PARTITIONING') . "_postinstall.pm";
|
|
$storagepost = $loc if (-e "$casedir/$loc");
|
|
}
|
|
autotest::loadtest $storagepost if ($storagepost);
|
|
|
|
if (get_var("UEFI") && !get_var("NO_UEFI_POST") && !get_var("START_AFTER_TEST")) {
|
|
autotest::loadtest "tests/uefi_postinstall.pm";
|
|
}
|
|
|
|
# console avc / crash check
|
|
# it makes no sense to run this after logging in on most post-
|
|
# install tests (hence ! BOOTFROM) and we do not want it
|
|
# on crashed installations (hence ! CRASH_REPORT) but we *do* want
|
|
# to run it on upgrade tests after upgrading (hence UPGRADE)
|
|
# desktops have specific tests for this (hence !DESKTOP). For
|
|
# desktop upgrades we should really upload a disk image at the end
|
|
# of upgrade and run all the desktop post-install tests on that
|
|
if (!get_var("DESKTOP") && !get_var("CRASH_REPORT") && (!get_var("BOOTFROM") || get_var("UPGRADE"))) {
|
|
autotest::loadtest "tests/_console_avc_crash.pm";
|
|
}
|
|
|
|
# generic post-install test load
|
|
if (get_var("POSTINSTALL")) {
|
|
my @pis = split(/ /, get_var("POSTINSTALL"));
|
|
# For each test in POSTINSTALL, load the test
|
|
foreach my $pi (@pis) {
|
|
autotest::loadtest "tests/${pi}.pm";
|
|
}
|
|
}
|
|
# If POSTINSTALL_PATH is set, we will load all available test files from that location
|
|
# as postinstall tests.
|
|
elsif (get_var("POSTINSTALL_PATH")) {
|
|
my $casedir = get_var("CASEDIR");
|
|
my $path = get_var("POSTINSTALL_PATH");
|
|
# Read the list of files on that path,
|
|
my @pis = glob "${casedir}/${path}/*.pm";
|
|
# and load each of them.
|
|
foreach my $pi (@pis) {
|
|
$pi = basename($pi);
|
|
autotest::loadtest "$path/$pi";
|
|
}
|
|
}
|
|
|
|
# load the ADVISORY / KOJITASK post-install test - this records which
|
|
# update or task packages were actually installed during the test. Don't
|
|
# do this for netinst tests; as these just use the default install repo,
|
|
# they will not get the packages from the update. But installs from live
|
|
# image and ostree installer image should get them.
|
|
if (get_var("ADVISORY_OR_TASK") && get_var("TEST") ne "install_default_update_netinst") {
|
|
# don't do this for support server unless the update is for the same
|
|
# release as the support server disk image, as we don't install the
|
|
# updates on support server when they differ
|
|
unless (get_var("TEST") eq "support_server" && get_var("VERSION") ne get_var("CURRREL")) {
|
|
autotest::loadtest "tests/_advisory_post.pm";
|
|
}
|
|
}
|
|
|
|
# we should shut down before uploading disk images
|
|
if (get_var("STORE_HDD_1") || get_var("STORE_HDD_2") || get_var("PUBLISH_HDD_1")) {
|
|
autotest::loadtest "tests/_console_shutdown.pm";
|
|
}
|
|
|
|
|
|
}
|
|
|
|
## LOADING STARTS HERE
|
|
|
|
|
|
# if user set ENTRYPOINT, run required test directly
|
|
# (good for tests where it doesn't make sense to use _boot_to_anaconda, _software_selection etc.)
|
|
# if you want to run more than one test via ENTRYPOINT, separate them with space
|
|
if (get_var("ENTRYPOINT")) {
|
|
my @entrs = split(/ /, get_var("ENTRYPOINT"));
|
|
foreach my $entr (@entrs) {
|
|
autotest::loadtest "tests/${entr}.pm";
|
|
}
|
|
}
|
|
elsif (get_var("UPGRADE")) {
|
|
load_upgrade_tests;
|
|
}
|
|
elsif ((!get_var("START_AFTER_TEST") && !get_var("BOOTFROM") && !get_var("IMAGE_DEPLOY")) || get_var("INSTALL")) {
|
|
# for now we can assume START_AFTER_TEST and BOOTFROM mean the
|
|
# test picks up after an install, and IMAGE_DEPLOY means we're
|
|
# deploying a disk image (no installer) so in those cases we skip
|
|
# to post-install, unless the override INSTALL var is set
|
|
|
|
if (get_var("PREINSTALL")) {
|
|
# specified module supposed to first boot to rescue mode
|
|
# do any required actions before to exit rescue mode (triggering reboot).
|
|
# reboot will run through next normal install steps of load_install_tests.
|
|
my @pis = split(/ /, get_var("PREINSTALL"));
|
|
foreach my $pi (@pis) {
|
|
autotest::loadtest "tests/${pi}.pm";
|
|
}
|
|
}
|
|
|
|
load_install_tests;
|
|
}
|
|
|
|
if (!get_var("ENTRYPOINT")) {
|
|
load_postinstall_tests;
|
|
}
|
|
|
|
# load application start-stop tests
|
|
if (get_var("STARTSTOP")) {
|
|
my $desktop = get_var('DESKTOP');
|
|
my $casedir = get_var('CASEDIR');
|
|
|
|
if ($desktop eq 'gnome') {
|
|
# Run this test to preset the environment
|
|
autotest::loadtest "tests/apps_gnome_preset.pm";
|
|
}
|
|
|
|
# Find all tests from a directory defined by the DESKTOP variable
|
|
my @apptests = glob "${casedir}/tests/apps_startstop/${desktop}/*.pm";
|
|
# Now load them
|
|
foreach my $filepath (@apptests) {
|
|
my $file = basename($filepath);
|
|
autotest::loadtest "tests/apps_startstop/${desktop}/${file}";
|
|
}
|
|
if ($desktop eq 'gnome') {
|
|
# Run this test to check if required application have registered.
|
|
autotest::loadtest "tests/workstation_core_applications.pm";
|
|
}
|
|
}
|
|
1;
|
|
|
|
# vim: set sw=4 et:
|