package utils; use strict; use base 'Exporter'; use Exporter; use lockapi; use testapi qw(is_serial_terminal :DEFAULT); our @EXPORT = qw/run_with_error_check type_safely type_very_safely desktop_vt boot_to_login_screen console_login console_switch_layout desktop_switch_layout console_loadkeys_us do_bootloader boot_decrypt check_release menu_launch_type setup_repos repo_setup get_workarounds disable_updates_repos cleanup_workaround_repo console_initial_setup handle_welcome_screen gnome_initial_setup anaconda_create_user check_desktop download_modularity_tests quit_firefox advisory_get_installed_packages advisory_check_nonmatching_packages start_with_launcher quit_with_shortcut disable_firefox_studies select_rescue_mode copy_devcdrom_as_isofile get_release_number check_left_bar check_top_bar check_prerelease check_version spell_version_number _assert_and_click is_branched rec_log repos_mirrorlist register_application get_registered_applications solidify_wallpaper check_and_install_git download_testdata make_serial_writable set_update_notification_timestamp/; # We introduce this global variable to hold the list of applications that have # registered during the apps_startstop_test when they have sucessfully run. our @application_list; sub run_with_error_check { my ($func, $error_screen) = @_; # Check screen does not work for serial console, so we need to use # different checking mechanism for it. if (testapi::is_serial_terminal) { # by using 'unless' and 'expect_not_found=>1' here we avoid # the web UI showing each failure to see the error message as # a 'failed match' die "Error screen appeared" unless (wait_serial($error_screen, timeout => 5, expect_not_found => 1)); $func->(); die "Error screen appeared" unless (wait_serial($error_screen, timeout => 5, expect_not_found => 1)); } else { die "Error screen appeared" if (check_screen $error_screen, 5); $func->(); die "Error screen appeared" if (check_screen $error_screen, 5); } } # high-level 'type this string quite safely but reasonably fast' # function whose specific implementation may vary sub type_safely { my $string = shift; type_string($string, wait_screen_change => 3, max_interval => 20); # similarity level 38 as there will commonly be a flashing # cursor and the default level (47) is too tight wait_still_screen(stilltime => 2, similarity_level => 38); } # high-level 'type this string extremely safely and rather slow' # function whose specific implementation may vary sub type_very_safely { my $string = shift; type_string($string, wait_screen_change => 1, max_interval => 1); # similarity level 38 as there will commonly be a flashing # cursor and the default level (47) is too tight wait_still_screen(stilltime => 5, similarity_level => 38); } sub get_release_number { # return the release number; so usually VERSION, but for Rawhide, # we return RAWREL. This allows us to avoid constantly doing stuff # like `if ($version eq "Rawhide" || $version > 30)`. my $version = get_var("VERSION"); my $rawrel = get_var("RAWREL", "Rawhide"); return $rawrel if ($version eq "Rawhide"); return $version; } # Wait for login screen to appear. Handle the annoying GPU buffer # problem where we see a stale copy of the login screen from the # previous boot. Will suffer a ~30 second delay if there's a chance # we're *already at* the expected login screen. sub boot_to_login_screen { my %args = @_; $args{timeout} //= 300; if (testapi::is_serial_terminal) { # For serial console, just wait for the login prompt unless (wait_serial "login:", timeout => $args{timeout}) { die "No login prompt shown on serial console."; } } else { # we may start at a screen that matches one of the needles; if so, # wait till we don't (e.g. when rebooting at end of live install, # we match text_console_login until the console disappears). # The following is true for non-serial console. my $count = 5; while (check_screen("login_screen", 3) && $count > 0) { sleep 5; $count -= 1; } assert_screen "login_screen", $args{timeout}; if (match_has_tag "graphical_login") { wait_still_screen(timeout => 30, stilltime => 10, similarity_level => 38); assert_screen "login_screen"; } } } # Switch keyboard layouts at a console sub console_switch_layout { # switcher key combo differs between layouts, for console if (get_var("LANGUAGE", "") eq "russian") { send_key "ctrl-shift"; } } # switch to 'native' or 'ascii' input method in a graphical desktop # usually switched configs have one mode for inputting ascii-ish # characters (which may be 'us' keyboard layout, or a local layout for # inputting ascii like 'jp') and one mode for inputting native # characters (which may be another keyboard layout, like 'ru', or an # input method for more complex languages) # 'environment' can be a desktop name or 'anaconda' for anaconda # if not set, will use get_var('DESKTOP') or default 'anaconda' sub desktop_switch_layout { my ($layout, $environment) = @_; $layout //= 'ascii'; $environment //= get_var("DESKTOP", "anaconda"); # if already selected, we're good return if (check_screen "${environment}_layout_${layout}", 3); # otherwise we need to switch my $switcher = "alt-shift"; # anaconda $switcher = "super-spc" if $environment eq 'gnome'; # KDE? not used yet # FIXME we use send_key_until_needlematch because sometimes the # switch just doesn't work in gdm: # https://gitlab.gnome.org/GNOME/gnome-shell/-/issues/6066#note_1707051 send_key_until_needlematch("${environment}_layout_${layout}", $switcher, 3, 3); } # this is used at the end of console_login to check if we got a prompt # indicating that we got a bash shell, but sourcing of /etc/bashrc # failed (the prompt looks different in this case). We treat this as # a soft failure. sub _console_login_finish { # The check differs according to the console used. if (testapi::is_serial_terminal) { unless (wait_serial("-bash-.*[#\$]", timeout => 5, expect_not_found => 1)) { record_soft_failure "It looks like profile sourcing failed"; } } else { if (match_has_tag "bash_noprofile") { record_soft_failure "It looks like profile sourcing failed"; } } } # this subroutine handles logging in as a root/specified user into console # it requires TTY to be already displayed (handled by the root_console() # method of distribution classes) sub console_login { my %args = ( user => "root", password => get_var("ROOT_PASSWORD", "weakpassword"), # default is 10 seconds, set below, 0 means 'default' timeout => 0, @_ ); $args{timeout} ||= 10; # Since we do not test many serial console tests, and we probably # only want to test serial console on a minimal installation only, # let us not do all the magic to handle different console logins # and let us simplify the process. # We will check if we are logged in, and if so, we will log out to # enable a new proper login based on the user variable. if (get_var("SERIAL_CONSOLE") || is_serial_terminal()) { # Check for the usual prompt. if (wait_serial("~\][#\$]", timeout => 5, quiet => 1)) { type_string "logout\n"; # Wait a bit to let the logout properly finish. sleep 10; } # Do the new login. type_string $args{user}; type_string "\n"; wait_serial("Password:", timeout => 2, quiet => 1); type_string $args{password}; type_string "\n"; # Let's perform a simple login test. This is the same as # whoami, but has the advantage of existing in installer env assert_script_run "id -un"; unless (wait_serial $args{user}, timeout => 5) { die "Logging onto the serial console has failed."; } } else { # There's a timing problem when we switch from a logged-in console # to a non-logged in console and immediately call this function; # if the switch lags a bit, this function will match one of the # logged-in needles for the console we switched from, and get out # of sync (e.g. https://openqa.stg.fedoraproject.org/tests/1664 ) # To avoid this, we'll sleep a few seconds before starting sleep 4; my $good = ""; my $bad = ""; if ($args{user} eq "root") { $good = "root_console"; $bad = "user_console"; } else { $good = "user_console"; $bad = "root_console"; } if (check_screen $bad, 0) { # we don't want to 'wait' for this as it won't return my $script = "exit"; # If Turkish keyboard is installed, the word "exit" is typed # incorrectly because the keyboard layout is different and # openQA sends keys according to the English layout. # Therefore we need to send a string that is # correctly interpreted by the Turkish layout. if (get_var("LANGUAGE") eq "turkish") { $script = "ex't"; } script_run $script, 0; sleep 2; } assert_screen [$good, 'text_console_login'], $args{timeout}; # if we're already logged in, all is good if (match_has_tag $good) { _console_login_finish(); return; } # otherwise, we saw the login prompt, type the username type_string("$args{user}\n"); assert_screen [$good, 'console_password_required'], 45; # on a live image, just the user name will be enough if (match_has_tag $good) { # clear the screen (so the remaining login prompt text # doesn't confuse subsequent runs of this) my $clearstr = "clear\n"; $clearstr = "cleqr\n" if (get_var("LANGUAGE") eq 'french'); type_string $clearstr; _console_login_finish(); return; } # otherwise, type the password type_string "$args{password}"; if (get_var("SWITCHED_LAYOUT") and $args{user} ne "root") { # see _do_install_and_reboot; when layout is switched # user password is doubled to contain both US and native # chars console_switch_layout; type_string "$args{password}"; console_switch_layout; } send_key "ret"; # make sure we reached the console unless (check_screen($good, 30)) { # as of 2018-10 we have a bug in sssd which makes this take # unusually long in the FreeIPA tests, let's allow longer, # with a soft fail - RHBZ #1644919 record_soft_failure "Console login is taking a long time - #1644919?"; my $timeout = 30; # even an extra 30 secs isn't long enough on aarch64... $timeout = 90 if (get_var("ARCH") eq "aarch64"); assert_screen($good, $timeout); } # clear the screen (so the remaining login prompt text # doesn't confuse subsequent runs of this) my $clearstr = "clear\n"; $clearstr = "cleqr\n" if (get_var("LANGUAGE") eq 'french'); type_string $clearstr; } _console_login_finish(); } # Figure out what tty the desktop is on, switch to it. Assumes we're # at a root console sub desktop_vt { # use loginctl or ps to find the tty of test's session (loginctl) # or gnome-session, Xwayland or Xorg (ps); as of 2019-09 we often # get tty? for Xwayland and Xorg processes, so using loginctl can # help my $xout; # don't fail test if we don't find any process, just guess tty1. # os-autoinst calls the script with 'bash -e' which causes it to # stop as soon as any command fails, so we use ||: to make the # first grep return 0 even if it matches nothing eval { $xout = script_output ' loginctl | grep test ||:; ps -e | egrep "(startplasma|gnome-session|Xwayland|Xorg)" | grep -o tty[0-9] ||:' }; my $tty = 1; # default while ($xout =~ /tty(\d)/g) { $tty = $1; # most recent match is probably best } select_console "tty${tty}-console"; # work around https://gitlab.gnome.org/GNOME/gnome-software/issues/582 # if it happens. As of 2019-05, seeing something similar on KDE too my $desktop = get_var('DESKTOP'); my $sfr = 0; my $timeout = 10; my $count = 6; while (check_screen("auth_required", $timeout) && $count > 0) { $count -= 1; unless ($sfr) { record_soft_failure "spurious 'auth required' - https://gitlab.gnome.org/GNOME/gnome-software/issues/582"; $sfr = 1; $timeout = 3; } click_lastmatch if ($desktop eq 'kde'); if (match_has_tag "auth_required_fprint") { my $user = get_var("USER_LOGIN", "test"); select_console "tty6-console"; console_login; assert_script_run "echo SCAN ${user}-finger-1 | socat STDIN UNIX-CONNECT:/run/fprintd-virt"; select_console "tty${tty}-console"; } elsif (match_has_tag "auth_required_locked") { # When console operation takes a long time, the screen locks # and typing password fails. If that happens, unlock # the screen first and then type password. send_key("ret"); wait_still_screen(2); type_very_safely "weakpassword\n"; } else { # bit sloppy but in all cases where this is used, this is the # correct password type_very_safely "weakpassword\n"; } } } # load US layout (from a root console) sub console_loadkeys_us { if (get_var('LANGUAGE') eq 'french') { script_run "loqdkeys us", 0; # might take a few secs sleep 3; } elsif (get_var('LANGUAGE') eq 'japanese' || get_var('LANGUAGE') eq 'turkish') { script_run "loadkeys us", 0; sleep 3; } } sub do_bootloader { # Handle bootloader screen. # 'uefi' is whether this is a UEFI install, will get_var UEFI if # not explicitly set. 'postinstall' is whether we're on an # installed system or at the installer (this matters for how many # times we press 'down' to find the kernel line when typing args). # 'args' is a string of extra kernel args, if desired. 'mutex' is # a parallel test mutex lock to wait for before proceeding, if # desired. 'first' is whether to hit 'up' a couple of times to # make sure we boot the first menu entry. 'timeout' is how long to # wait for the bootloader screen. my %args = ( postinstall => 0, params => "", mutex => "", first => 1, timeout => 30, uefi => get_var("UEFI"), ofw => get_var("OFW"), @_ ); my $relnum = get_release_number; # we use the firmware-type specific tags because we want to be # sure we actually did a UEFI boot my $boottag = "bootloader_bios"; $boottag = "bootloader_uefi" if ($args{uefi}); assert_screen $boottag, $args{timeout}; if ($args{mutex}) { # cancel countdown send_key "left"; mutex_lock $args{mutex}; mutex_unlock $args{mutex}; } if ($args{first}) { # press up a couple of times to make sure we're at first entry send_key "up"; send_key "up"; } if ($args{params}) { send_key "e"; # we need to get to the 'linux' line here, and grub does # not have any easy way to do that. Depending on the arch # and the Fedora release, we may have to press 'down' 2 # times, or 13, or 12, or some other goddamn number. That # got painful to keep track of, so let's go bottom-up: # press 'down' 50 times to make sure we're at the bottom, # then 'up' twice to reach the 'linux' line. This seems to # work in every permutation I can think of to test. for (1 .. 50) { send_key 'down'; } sleep 1; send_key 'up'; sleep 1; send_key 'up'; send_key "end"; # Change type_string by type_safely because keyboard polling # in SLOF usb-xhci driver failed sometimes in powerpc type_safely " $args{params}"; } # for debug purpose save_screenshot; # ctrl-X boots from grub editor mode send_key "ctrl-x"; # return boots all other cases send_key "ret"; } sub boot_decrypt { # decrypt storage during boot; arg is timeout (in seconds) my $timeout = shift || 60; assert_screen "boot_enter_passphrase", $timeout; type_very_safely get_var("ENCRYPT_PASSWORD"); send_key "ret"; } sub check_release { # Checks whether the installed release matches a given value. E.g. # `check_release(23)` checks whether the installed system is # Fedora 23. The value can be 'Rawhide' or a Fedora release # number; often you will want to use `get_var('VERSION')`. Expects # a console prompt to be active when it is called. my $release = shift; my $check_command = "grep SUPPORT_PRODUCT_VERSION /etc/os-release"; validate_script_output $check_command, sub { $_ =~ m/REDHAT_SUPPORT_PRODUCT_VERSION=$release/ }; } sub disable_firefox_studies { if (get_var("CANNED")) { # enable rpm-ostree /usr overlay so we can write to /usr assert_script_run "rpm-ostree usroverlay"; } # if the first file exists, we've already run, so we can skip # running again return unless (script_run 'test -f $(rpm --eval %_libdir)/firefox/distribution/policies.json'); # create a config file that disables Firefox's dumb 'shield # studies' so they don't break tests: # https://bugzilla.mozilla.org/show_bug.cgi?id=1529626 # and also disables the password manager stuff so that doesn't # break password entry: # https://bugzilla.mozilla.org/show_bug.cgi?id=1635833 # and *also* tries to disable "first run pages", though this # doesn't seem to be working yet: # https://bugzilla.mozilla.org/show_bug.cgi?id=1703903 assert_script_run 'mkdir -p $(rpm --eval %_libdir)/firefox/distribution'; assert_script_run 'printf \'{"policies": {"DisableFirefoxStudies": true, "OfferToSaveLogins": false, "OverrideFirstRunPage": "", "OverridePostUpdatePage": ""}}\' > $(rpm --eval %_libdir)/firefox/distribution/policies.json'; # Now create a preferences override file that disables the # quicksuggest and total cookie protection onboarding screens # see https://support.mozilla.org/en-US/kb/customizing-firefox-using-autoconfig # for why this wacky pair of files with required values is needed # and https://bugzilla.mozilla.org/show_bug.cgi?id=1703903 again # for the actual values assert_script_run 'mkdir -p $(rpm --eval %_libdir)/firefox/browser/defaults/preferences'; assert_script_run 'printf "// required comment\npref(\'general.config.filename\', \'openqa-overrides.cfg\');\npref(\'general.config.obscure_value\', 0);\n" > $(rpm --eval %_libdir)/firefox/browser/defaults/preferences/openqa-overrides.js'; assert_script_run 'printf "// required comment\npref(\'browser.urlbar.quicksuggest.shouldShowOnboardingDialog\', false);\npref(\'privacy.restrict3rdpartystorage.rollout.enabledByDefault\', false);\n" > $(rpm --eval %_libdir)/firefox/openqa-overrides.cfg'; } sub repos_mirrorlist { # Use mirrorlist not metalink so we don't hit the timing issue where # the infra repo is updated but mirrormanager metadata checksums # have not been updated, and the infra repo is rejected as its # metadata checksum isn't known to MM my $files = shift; $files ||= "/etc/yum.repos.d/fedora*.repo"; assert_script_run "sed -i -e 's,metalink,mirrorlist,g' ${files}"; } sub get_setup_repos_script { # ensure the 'setup_repos.py' downloader script is present if (script_run "ls /usr/local/bin/setup_repos.py") { assert_script_run 'curl --retry-delay 10 --max-time 30 --retry 5 -o /usr/local/bin/setup_repos.py https://pagure.io/fedora-qa/os-autoinst-distri-fedora/raw/main/f/setup_repos.py', timeout => 180; assert_script_run 'chmod ugo+x /usr/local/bin/setup_repos.py'; } } sub get_workarounds { my $version = shift || get_var("VERSION"); my %workarounds = ( "38" => [], "39" => [], "40" => ["FEDORA-2024-8b66f08f0b"], "41" => [], ); my $advortasks = $workarounds{$version}; return @$advortasks; } sub cleanup_workaround_repo { # clean up the workaround repo (see next). script_run "rm -rf /mnt/workarounds_repo"; script_run "rm -f /etc/yum.repos.d/workarounds.repo"; } sub disable_updates_repos { # disable updates-testing, or both updates-testing and updates. # factors out similar code in a few different places. my %args = ( both => 0, @_ ); # FIXME as of 2023-06-20 dnf5 doesn't have config-manager plugin yet :( assert_script_run 'sed -i -e "s,enabled=1,enabled=0,g" /etc/yum.repos.d/fedora-updates-testing.repo'; assert_script_run 'sed -i -e "s,enabled=1,enabled=0,g" /etc/yum.repos.d/fedora-updates.repo' if ($args{both}); unless (script_run 'test -f /etc/yum.repos.d/fedora-updates-testing-modular.repo') { assert_script_run 'sed -i -e "s,enabled=1,enabled=0,g" /etc/yum.repos.d/fedora-updates-testing-modular.repo'; assert_script_run 'sed -i -e "s,enabled=1,enabled=0,g" /etc/yum.repos.d/fedora-updates-modular.repo' if ($args{both}); } } sub _repo_setup_compose { # doesn't work for IoT or CoreOS, anything that hits this on those # paths must work with default mirror config... my $subvariant = get_var("SUBVARIANT"); return if ($subvariant eq "IoT" || $subvariant eq "CoreOS"); # Appropriate repo setup steps for testing a compose # disable updates-testing and updates and use the compose location # as the target for fedora and rawhide rather than mirrorlist, so # tools see only packages from the compose under test my $location = get_var("LOCATION"); return unless $location; disable_updates_repos(both => 1); # we use script_run here as the rawhide and modular repo files # won't always exist and we don't want to bother testing or # predicting their existence; assert_script_run doesn't buy you # much with sed as it'll return 0 even if it replaced nothing script_run "sed -i -e 's,^metalink,#metalink,g' -e 's,^mirrorlist,#mirrorlist,g' -e 's,^#baseurl.*basearch,baseurl=${location}/Everything/\$basearch,g' -e 's,^#baseurl.*source,baseurl=${location}/Everything/source,g' /etc/yum.repos.d/{fedora,fedora-rawhide}.repo", 0; script_run "sed -i -e 's,^metalink,#metalink,g' -e 's,^mirrorlist,#mirrorlist,g' -e 's,^#baseurl.*basearch,baseurl=${location}/Modular/\$basearch,g' -e 's,^#baseurl.*source,baseurl=${location}/Modular/source,g' /etc/yum.repos.d/{fedora-modular,fedora-rawhide-modular}.repo", 0; # this can be used for debugging if something is going wrong # unless (script_run 'pushd /etc/yum.repos.d && tar czvf yumreposd.tar.gz * && popd') { # upload_logs "/etc/yum.repos.d/yumreposd.tar.gz"; # } } sub _prepare_update_mount { # create and mount the filesystem where we will store update/task packages # this is separate from setup_repos as it has to happen before we # enter the toolbox container on the CANNED workflow assert_script_run "mkdir -p /mnt/update_repo"; # if NUMDISKS is above 1, assume we want to put the update repo on # the second disk (to avoid huge updates exhausting space on the main # disk) if (get_var("NUMDISKS") > 1) { # I think the disk will always be vdb. This creates a single large # partition. assert_script_run "echo 'type=83' | sfdisk /dev/vdb"; assert_script_run "mkfs.ext4 /dev/vdb1"; assert_script_run "echo '/dev/vdb1 /mnt/update_repo ext4 defaults 1 2' >> /etc/fstab"; assert_script_run "mount /mnt/update_repo"; } assert_script_run "cd /mnt/update_repo"; } sub setup_repos { # setup workarounds (if necessary) and updates or tag repositories, # using the setup_repos.py script. It's necessary to set up repos # (rather than just downloading the RPMs and doing a one-time update) # for various reasons: to ensure later package operations use the # update packages, and for use when creating deliverables in the # tests that do that. Has a 'workarounds only' mode for # upgrade_preinstall to use (in case we need workarounds for the # pre-upgrade environment) my %args = ( # workarounds only waonly => 0, # release to get workarounds for version => get_var("VERSION"), # whether to write repo configs configs => 1, @_ ); my $arch = get_var("ARCH"); my $tag = get_var("TAG"); # write the tag repo config if appropriate assert_script_run 'printf "[openqa-testtag]\nname=openqa-testtag\nbaseurl=https://kojipkgs.fedoraproject.org/repos/' . "$tag/latest/$arch" . '/\ncost=2000\nenabled=1\ngpgcheck=0\n" > /etc/yum.repos.d/openqa-testtag.repo' if ($tag && !$args{waonly}); my @was = get_workarounds($args{version}); # bail if there are no workarounds: # * if we're in workarounds-only mode # * if we're testing a side tag (so no packages to dl) if ($args{waonly} || $tag) { return unless (@was); } # if we got this far, we're definitely downloading *something* script_run "dnf -y install createrepo_c bodhi-client koji", 300; get_setup_repos_script; my $wastring = join(',', @was); my $udstring; # work out the list of update/task NVRs to test if (get_var("ADVISORY_NVRS") || get_var("ADVISORY_NVRS_1")) { # regular update case # old style single ADVISORY_NVRS var my @nvrs = split(/ /, get_var("ADVISORY_NVRS")); unless (@nvrs) { # new style chunked ADVISORY_NVRS_N vars my $count = 1; while ($count) { if (get_var("ADVISORY_NVRS_$count")) { push @nvrs, split(/ /, get_var("ADVISORY_NVRS_$count")); $count++; } else { $count = 0; } } } $udstring = join(',', @nvrs); } elsif (get_var("KOJITASK")) { # Koji task case (KOJITASK will be set). If multiple tasks, # they're concatenated with underscores, switch to commas $udstring = get_var("KOJITASK"); $udstring =~ s/_/,/; } else { die "Neither ADVISORY_NVRS nor KOJITASK set! Don't know what to do" unless ($args{waonly}); } my $cmd = "/usr/local/bin/setup_repos.py"; # don't download updates if we're in workarounds-only mode or testing a tag $cmd .= " -u $udstring" unless ($args{waonly} || $tag); $cmd .= " -w $wastring" if (@was); # write repo config files if asked $cmd .= " -c" if ($args{configs}); $cmd .= " $arch"; assert_script_run $cmd, 600; unless ($args{waonly} || $tag) { upload_logs "/mnt/updatepkgnames.txt"; upload_logs "/mnt/updatepkgs.txt"; } } sub _repo_setup_updates { # Appropriate repo setup steps for testing a Bodhi update # Check if we already ran, bail if so return unless script_run "test -f /mnt/updatepkgs.txt"; my $version = get_var("VERSION"); my $currrel = get_var("CURRREL", "0"); my $arch = get_var("ARCH"); my $tag = get_var("TAG"); # this can be used for debugging repo config if something is wrong # unless (script_run 'pushd /etc/yum.repos.d && tar czvf yumreposd.tar.gz * && popd') { # upload_logs "/etc/yum.repos.d/yumreposd.tar.gz"; # } # if no current console is registered, assume we're on tty1 my $currcon = current_console || "tty1-console"; # do all this setup from a serial console for speed (especially when # downloading large updates) # the console we register as 'virtio-console' is the first virtio # serial console, 'virtio_console' on the qemu command line. # on most platforms, this console is /dev/hvc0 (and the default # qemu serial console, which for openQA is backed by a ringbuf # device and logged as serial0.txt, is /dev/ttyS0). however, on # Power, the default serial console is /dev/hvc0 and the first # virtio serial console is /dev/hvc1. # it seems we get a getty on ttyS0 and hvc0 by default, but we # don't get one on hvc1. so on Power, start a tty on hvc1 assert_script_run 'systemctl start serial-getty@hvc1.service' if (get_var("OFW")); script_run "echo 'Package download and repo creation happening on serial console...'"; select_console("virtio-console"); console_login(); # prepare the directory the packages will be downloaded to, unless we're # testing a side tag _prepare_update_mount() unless ($tag); # on CANNED, we need to enter the toolbox at this point if (get_var("CANNED")) { type_string "toolbox -y enter\n"; # this is simply to wait till we're in the toolbox assert_script_run "true", 180; } # use mirrorlist not metalink in repo configs repos_mirrorlist(); # Disable updates-testing so other bad updates don't break us disable_updates_repos(both => 0) if ($version > $currrel); # use the buildroot repo on Rawhide: see e.g. # https://pagure.io/fedora-ci/general/issue/376 for why if (get_var("VERSION") eq get_var("RAWREL") && get_var("TEST") ne "support_server") { assert_script_run 'printf "[koji-rawhide]\nname=koji-rawhide\nbaseurl=https://kojipkgs.fedoraproject.org/repos/rawhide/latest/' . $arch . '/\ncost=2000\nenabled=1\ngpgcheck=0\n" > /etc/yum.repos.d/koji-rawhide.repo'; } if (get_var("CANNED")) { # install and use en_US.UTF-8 locale for consistent sort # ordering assert_script_run "dnf -y install glibc-langpack-en", 300; assert_script_run "export LC_ALL=en_US.UTF-8"; } # set up workarounds and updates repos (if needed) if (get_var("TEST") eq "support_server" && $version ne get_var("CURRREL")) { # don't write repo configs if this is the support_server test # and it is running on a different release than the update is for # (in this case we need the repo to exist but do not want to use # it on the actual support_server system) setup_repos(configs => 0); } else { setup_repos(configs => 1); # run an update now, except for upgrade or install tests, # where the updated packages should have been installed # already and we want to fail if they weren't, or CANNED # tests, there's no point updating the toolbox script_run "dnf -y update", 1200 unless (get_var("UPGRADE") || get_var("INSTALL") || get_var("CANNED")); # on liveinst tests, we'll remove the packages we installed # above (and their deps, which dnf will include automatically), # just in case they're in the update under test; otherwise we # get a bogus failure for the package not being updated script_run "dnf -y remove bodhi-client createrepo_c koji", 600 if (get_var("INSTALL") && !get_var("CANNED")); } # exit the toolbox on CANNED if (get_var("CANNED")) { type_string "exit\n"; wait_serial "# "; } # flip back to whatever console we were on before select_console $currcon; } sub repo_setup { # This repo does not always exist for Rawhide or Branched, and # some things (at least realmd) try to update the repodata for # it even though it is disabled, and fail. At present none of the # tests needs it, so let's just unconditionally nuke it. assert_script_run "rm -f /etc/yum.repos.d/fedora-cisco-openh264.repo"; # Run the appropriate sub-function for the job get_var("ADVISORY_OR_TASK") ? _repo_setup_updates : _repo_setup_compose; # wipe the openh264 file again in case it came back during repo setup assert_script_run "rm -f /etc/yum.repos.d/fedora-cisco-openh264.repo"; } sub console_initial_setup { # Handle console initial-setup. Currently used only for ARM disk # image tests. assert_screen "console_initial_setup", 500; # IMHO it's better to use sleeps than to have needle for every text screen wait_still_screen 5; # Set timezone type_string "2\n"; wait_still_screen 5; type_string "1\n"; # Set timezone wait_still_screen 5; type_string "1\n"; # Europe wait_still_screen 5; type_string "37\n"; # Prague wait_still_screen 7; # Set root password type_string "4\n"; wait_still_screen 5; type_string get_var("ROOT_PASSWORD") || "weakpassword"; send_key "ret"; wait_still_screen 5; type_string get_var("ROOT_PASSWORD") || "weakpassword"; send_key "ret"; wait_still_screen 7; # Create user type_string "5\n"; wait_still_screen 5; type_string "1\n"; # create new wait_still_screen 5; type_string "3\n"; # set username wait_still_screen 5; type_string get_var("USER_LOGIN", "test"); send_key "ret"; wait_still_screen 5; type_string "5\n"; # set password wait_still_screen 5; type_string get_var("USER_PASSWORD", "weakpassword"); send_key "ret"; wait_still_screen 5; type_string get_var("USER_PASSWORD", "weakpassword"); send_key "ret"; wait_still_screen 5; type_string "6\n"; # make him an administrator wait_still_screen 5; type_string "c\n"; wait_still_screen 7; assert_screen "console_initial_setup_done", 30; type_string "c\n"; # continue } sub handle_welcome_screen { # handle the 'welcome' screen on GNOME and KDE since F38. shared # in a few places if (check_screen "getting_started", 45) { if (get_var("DESKTOP") eq "kde") { # just closing it seems to result in it running again on # next boot, so let's click Skip click_lastmatch; } else { send_key "alt-f4"; # for GNOME 40, alt-f4 doesn't work send_key "esc"; } wait_still_screen 5; set_var("_WELCOME_DONE", 1); } else { record_soft_failure "Welcome tour missing"; } } sub gnome_initial_setup { # Handle gnome-initial-setup, with variations for live mode (the # short run on live boot since F39), the pre-login mode (when no # user was created during install) and post-login mode (when user # was created during install). post-login mode currently (2023-08) # unused, but may come back in future. 'livetry' indicates whether # to launch the installer (0) or desktop (1) at the end of live # flow my %args = ( prelogin => 0, live => 0, livetry => 0, timeout => 120, @_ ); my $relnum = get_release_number; my $advortask = get_var("ADVISORY_OR_TASK"); # note: when 'language' is "skipped", it's turned into a 'welcome' # page, which has a "Start Setup" button, not a "Next" button unless (check_screen ["next_button", "start_setup"], $args{timeout}) { record_soft_failure "g-i-s taking longer than expected to start up!"; assert_screen ["next_button", "start_setup"], $args{timeout}; } # GDM 3.24.1 dumps a cursor in the middle of the screen here... mouse_hide if ($args{prelogin}); # the pages we *may* need to click 'next' on. *NOTE*: 'language' # is the 'welcome' page, and is in fact never truly skipped; if # it's configured to be skipped, it just shows without the language # selection widget (so it's a bare 'welcome' page). Current openQA # tests never see 'eula' or 'network'. You can find the upstream # list in gnome-initial-setup/gnome-initial-setup.c , and the skip # config file for Fedora is vendor.conf in the package repo. my @nexts = ('language', 'keyboard', 'privacy', 'timezone', 'software'); # now, we're going to figure out how many of them this test will # *actually* see... if ($args{live}) { # this is the flow we see when booting an F40+ Workstation live # we only get language and keyboard @nexts = ('language', 'keyboard'); } if ($args{prelogin}) { # 'language', 'keyboard' and 'timezone' were skipped between F28 # and F39 in the 'new user' mode by # https://fedoraproject.org//wiki/Changes/ReduceInitialSetupRedundancy # https://bugzilla.redhat.com/show_bug.cgi?id=1474787 , # except 'language' was never *really* skipped (see above) if ($relnum < 40) { @nexts = grep { $_ ne 'keyboard' } @nexts; @nexts = grep { $_ ne 'timezone' } @nexts; } # From gnome-initial-setup 45~beta-3 on, no screens are # skipped in vendor.conf. 'language' and 'keyboard' should be # skipped (meaning 'language' is turned into 'welcome' and # 'keyboard' is really skipped) on live installs because we saw # them already, but this only works from anaconda 39.32.2 / # 40.3 onwards. network installs and disk image deployments # will show these screens (which is good for disk image # deployments, but redundant for network installs) elsif (match_has_tag "start_setup") { # if we saw start_setup, that means 'language' was skipped # and we can assume 'keyboard' will also be skipped @nexts = grep { $_ ne 'keyboard' } @nexts; } } else { # 'timezone' and 'software' are suppressed for the 'existing user' # form of g-i-s (upstream, not in vendor.conf) @nexts = grep { $_ ne 'software' } @nexts; @nexts = grep { $_ ne 'timezone' } @nexts; } foreach my $next (@nexts) { # give animations a bit to settle down wait_still_screen 3; # click 'Next' $nexts times, moving the mouse to avoid # highlight problems, sleeping to give it time to get # to the next screen between clicks mouse_set(100, 100); if ($next eq 'language') { my $lang = get_var("LANGUAGE") // "english"; # only accept start_setup one time, to avoid matching # on it during transition to next screen. also accept # next_button as in per-user mode, first screen has that # not start_setup assert_screen ["next_button", "start_setup"]; if (match_has_tag("start_setup") || check_screen("gis_lang_${lang}_selected")) { # we're at the 'welcome' version of the screen, or we're # at the 'language' version and the language we want is # selected wait_screen_change { click_lastmatch(); }; } else { # we're at the language version and the language we want isn't # selected assert_and_click("install_lang_search_field"); type_very_safely($lang); assert_and_click("gis_lang_${lang}_select"); wait_screen_change { assert_and_click("next_button"); }; } } elsif ($next eq 'timezone') { assert_screen ["next_button", "next_button_inactive"]; if (match_has_tag "next_button_inactive") { record_soft_failure "geolocation failed!"; send_key "tab"; wait_still_screen 3; type_very_safely "washington-d"; send_key "down"; send_key "ret"; } wait_screen_change { assert_and_click "next_button"; }; } else { # Sometimes, the previous version was expection the next button, although # the wizard had proceeded to the final screen with no such button on it. # Therefore, we also try to assert the installation button to start Anaconda. wait_screen_change { assert_and_click ["next_button"]; }; } } unless (get_var("VNC_CLIENT") || $args{live} || $relnum > 39) { # We should be at the GOA screen, except on VNC_CLIENT case # where network isn't working yet. click 'Skip' one time. If # it's not visible we may have hit # https://bugzilla.redhat.com/show_bug.cgi?id=1997310 , which # we'll handle as a soft failure # This screen was removed from g-i-s in Jan 2024: # https://gitlab.gnome.org/GNOME/gnome-initial-setup/-/merge_requests/221 # so we don't see it on F40+, and can drop this block when # F39 is EOL mouse_set(100, 100); if (check_screen "skip_button", 60) { wait_screen_change { click_lastmatch; }; } else { record_soft_failure "GOA screen not seen! Likely RHBZ #1997310"; } } send_key "shift-tab" if ($args{live} && $args{livetry}); # on the 'live' flow, this will launch the installer send_key "ret"; # we don't want to do anything further on the 'live' flow return if ($args{live}); if ($args{prelogin}) { # create user my $user_login = get_var("USER_LOGIN") || "test"; my $user_password = get_var("USER_PASSWORD") || "weakpassword"; type_very_safely $user_login; wait_screen_change { assert_and_click "next_button"; }; type_very_safely $user_password; # two tabs to get to the confirm box since GNOME 44 type_string "\t\t"; type_very_safely $user_password; wait_screen_change { assert_and_click "next_button"; }; send_key "ret"; } else { handle_welcome_screen; } # don't do it again on second load set_var("_SETUP_DONE", 1); } sub _type_user_password { # convenience function used by anaconda_create_user, not meant # for direct use my $user_password = get_var("USER_PASSWORD") || "weakpassword"; if (get_var("SWITCHED_LAYOUT")) { # we double the password, the second time using the native # layout, so the password has both ASCII and native characters desktop_switch_layout "ascii", "anaconda"; type_very_safely $user_password; desktop_switch_layout "native", "anaconda"; type_very_safely $user_password; } else { type_very_safely $user_password; } } sub anaconda_create_user { # Create a user, in the anaconda interface. This is here because # the same code works both during install and for initial-setup, # which runs post-install, so we can share it. my %args = ( timeout => 90, @_ ); # For some languages, i.e. Turkish, we want to use a complicated # geo field to test that turkish letters will be displayed correctly # and that the installer will be able to handle them and change them # into the correct user name without special characters. my $geofield = get_var("USER_GECOS"); my $user_login = get_var("USER_LOGIN") || "test"; unless ($geofield) { # If geofield is not defined, let it be the same as login. $geofield = $user_login; } assert_and_click("anaconda_install_user_creation", timeout => $args{timeout}); assert_screen "anaconda_install_user_creation_screen"; # wait out animation wait_still_screen 2; # We will type the $geofield as the user name. type_very_safely $geofield; # For Turkish, we especially want to check that correct characters # are typed, so we will check it here. if (get_var("LANGUAGE") eq "turkish") { assert_screen("username_typed_correctly_turkish"); } send_key("tab"); # Now set the login name. type_very_safely($user_login); # And fill the password stuff. type_very_safely "\t\t\t"; _type_user_password(); wait_screen_change { send_key "tab"; }; wait_still_screen 2; _type_user_password(); # even with all our slow typing this still *sometimes* seems to # miss a character, so let's try again if we have a warning bar. # But not if we're installing with a switched layout, as those # will *always* result in a warning bar at this point (see below) if (!get_var("SWITCHED_LAYOUT") && check_screen "anaconda_warning_bar", 3) { wait_screen_change { send_key "shift-tab"; }; wait_still_screen 2; _type_user_password(); wait_screen_change { send_key "tab"; }; wait_still_screen 2; _type_user_password(); } assert_and_click "anaconda_spoke_done"; # since 20170105, we will get a warning here when the password # contains non-ASCII characters. Assume only switched layouts # produce non-ASCII characters, though this isn't strictly true if (get_var('SWITCHED_LAYOUT') && check_screen "anaconda_warning_bar", 3) { wait_still_screen 1; assert_and_click "anaconda_spoke_done"; } } sub check_desktop { # Check we're at a desktop. We do this by looking for the "apps" # menu button ("Activities" button on GNOME, kicker button on # KDE). This is set up as a helper function so we can handle # GNOME's behaviour of opening the overview on first login; all # our tests were written when GNOME *didn't* do that, so it # would be awkward to find all the places in them where we need # to close the overview. Instead, we just have this function # close it if it's open. my %args = ( timeout => 30, @_ ); my $count = 5; my $activematched = 0; while ($count > 0) { $count -= 1; assert_screen "apps_menu_button", $args{timeout}; if ($count == 4) { # GNOME 42 shows the inactive menu button briefly before # opening the overview. So we need to wait a bit on first # cycle in case GNOME is about to open the overview. wait_still_screen 5; assert_screen "apps_menu_button"; } # Here's where we detect if the overview is open and close it if (match_has_tag "apps_menu_button_active") { $activematched = 1; wait_still_screen 5; send_key "super"; wait_still_screen 5; } else { # this means we saw 'inactive', which is what we want last; } } if ($activematched) { # make sure we got to inactive after active die "never reached apps_menu_button_inactive!" unless (match_has_tag "apps_menu_button_inactive"); } } sub download_modularity_tests { # Download the modularity test script, place in the system and then # modify the access rights to make it executable. my ($whitelist) = @_; # we need python3-yaml for the script to run assert_script_run 'dnf -y install python3-yaml', 180; assert_script_run 'curl --retry-delay 10 --max-time 30 --retry 5 -o /root/test.py https://pagure.io/fedora-qa/modularity_testing_scripts/raw/master/f/modular_functions.py', timeout => 180; if ($whitelist eq 'whitelist') { assert_script_run 'curl --retry-delay 10 --max-time 30 --retry 5 -o /root/whitelist https://pagure.io/fedora-qa/modularity_testing_scripts/raw/master/f/whitelist', timeout => 180; } assert_script_run 'chmod 755 /root/test.py'; } sub quit_firefox { # Quit Firefox, handling the 'close multiple tabs' warning screen if # it shows up. Expects to quit to a recognizable console send_key "ctrl-q"; # expect to get to either the tabs warning or a console if (check_screen ["user_console", "root_console", "firefox_close_tabs"], 30) { # if we hit a console we're good unless (match_has_tag("firefox_close_tabs")) { wait_still_screen 5; return; } # otherwise we hit the tabs warning, click it click_lastmatch; # again, if we hit a console, we're good if (check_screen ["user_console", "root_console"], 30) { wait_still_screen 5; return; } } # if we reach here, we didn't see a console. This is most likely # https://bugzilla.redhat.com/show_bug.cgi?id=2094137 . soft fail # and reboot. this won't work if we need to decrypt or handle boot # args, but I don't think anything that calls this needs it record_soft_failure "No console on exit from Firefox, probably RHBZ #2094137"; power "reset"; boot_to_login_screen; console_login(user => "root", password => get_var("ROOT_PASSWORD")); } sub start_with_launcher { # Get the name of the needle with a launcher, find the launcher in the menu # and click on it to start the application. This function works for the # Gnome desktop. # $launcher holds the launcher needle, but some of the apps are hidden in a submenu # so this must be handled first to find the launcher needle. my ($launcher, $submenu, $group) = @_; $submenu //= ''; $group //= ''; my $desktop = get_var('DESKTOP'); my $item_to_check = $submenu || $launcher; # The following varies for different desktops. if ($desktop eq 'gnome') { # Start the Activities page send_key 'super'; wait_still_screen 5; # Click on the menu icon to come into the menus assert_and_click 'overview_app_grid'; wait_still_screen 5; # Find the application launcher in the current menu page. # If it cannot be found there, hit PageDown to go to another page. send_key_until_needlematch($item_to_check, 'pgdn', 5, 3); # If there was a submenu, click on that first. if ($submenu) { assert_and_click $submenu; wait_still_screen 5; } # Click on the launcher if (!check_screen($launcher)) { # On F33+, this subwindow thingy scrolls horizontally, # but only after we hit 'down' twice to get into it. send_key 'down'; send_key 'down'; send_key_until_needlematch($launcher, 'right', 5, 6); } assert_and_click $launcher; wait_still_screen 5; } else { die "start_with_launcher is currently only implemented on GNOME!"; } } sub quit_with_shortcut { # Quit the application using the Alt-F4 keyboard shortcut send_key 'alt-f4'; wait_still_screen 5; assert_screen 'workspace'; } # For update tests (this only works if we've been through # _repo_setup_updates), figure out which packages from the update # are currently installed. This is here so we can do it both in # _advisory_post and post_fail_hook. sub advisory_get_installed_packages { # can't do anything useful when testing a side tag return if (get_var("TAG")); # bail out if the file doesn't exist: this is in case we get # here in the post-fail hook but we failed before creating it return if script_run "test -f /mnt/updatepkgs.txt"; assert_script_run 'rpm -qa --qf "%{SOURCERPM} %{NAME} %{EPOCHNUM} %{VERSION} %{RELEASE}\n" | sort -u > /tmp/allpkgs.txt', timeout => 90; # this finds lines which appear in both files # http://www.unix.com/unix-for-dummies-questions-and-answers/34549-find-matching-lines-between-2-files.html if (script_run 'comm -12 /tmp/allpkgs.txt /mnt/updatepkgs.txt > /mnt/testedpkgs.txt') { # occasionally, for some reason, it's unhappy about sorting; # we shouldn't fail the test in this case, just upload the # files so we can see why... upload_logs "/tmp/allpkgs.txt", failok => 1; upload_logs "/mnt/updatepkgs.txt", failok => 1; } # we'll try and upload the output even if comm 'failed', as it # does in fact still write it in some cases upload_logs "/mnt/testedpkgs.txt", failok => 1; } sub advisory_check_nonmatching_packages { # For update tests (this only works if we've been through # _repo_setup_updates), figure out if we have a different version # of any package from the update installed - this indicates a # problem, it likely means a dep issue meant dnf installed an # older version from the frozen release repo my %args = ( fatal => 1, @_ ); # can't do anything useful when testing a side tag return if (get_var("TAG")); # bail out if the file doesn't exist: this is in case we get # here in the post-fail hook but we failed before creating it return if script_run "test -f /mnt/updatepkgnames.txt"; # if this fails in advisory_post, we don't want to do it *again* # unnecessarily in post_fail_hook return if (get_var("_ACNMP_DONE")); script_run 'touch /tmp/installedupdatepkgs.txt'; # this creates /tmp/installedupdatepkgs.txt as a sorted list of installed # packages with the same name as packages from the update, in the same form # as /mnt/updatepkgs.txt. The '--last | head -1' tries to handle the # problem of installonly packages like the kernel, where we wind up with # *multiple* versions installed after the update; the first line of output # for any given package with --last is the most recent version, i.e. the # one in the update. The sed replaces the caret - "^" - with "\^" (literal # slash then a caret) in the package NVRA; this is necessary to workaround # a bug in RPM - https://bugzilla.redhat.com/show_bug.cgi?id=2002038 . It # can be removed when that bug is fixed. Yes, it really needs eight slashes # (we need four to reach bash, and half of them get eaten by perl or # something along the way). Yes, it only works with *single* quotes. Yes, # I hate escaping script_run 'for pkg in $(cat /mnt/updatepkgnames.txt); do rpm -q $pkg && rpm -q $pkg --last | head -1 | cut -d" " -f1 | sed -e \'s,\^,\\\\\\\\^,g\' | xargs rpm -q --qf "%{SOURCERPM} %{NAME} %{EPOCHNUM} %{VERSION} %{RELEASE}\n" >> /tmp/installedupdatepkgs.txt; done', timeout => 180; script_run 'sort -u -o /tmp/installedupdatepkgs.txt /tmp/installedupdatepkgs.txt'; # for debugging, may as well always upload these, can't hurt anything upload_logs "/tmp/installedupdatepkgs.txt", failok => 1; upload_logs "/mnt/updatepkgs.txt", failok => 1; # download the check script and run it assert_script_run 'curl --retry-delay 10 --max-time 30 --retry 5 -o updvercheck.py https://pagure.io/fedora-qa/os-autoinst-distri-fedora/raw/main/f/updvercheck.py', timeout => 180; my $advisory = get_var("ADVISORY"); my $cmd = 'python3 ./updvercheck.py /mnt/updatepkgs.txt /tmp/installedupdatepkgs.txt'; $cmd .= " $advisory" if ($advisory); my $ret = script_run $cmd; # 2 is warnings only, 3 is problems, 1 means the script died in # some other way (probably a bug) if ($ret == 2) { record_soft_failure "Some update package(s) not installed, but this is probably OK, see script output"; } if ($ret == 1 || $ret == 3) { my $message = "Package(s) from update not installed when it should have been! See script output"; $message = "Script failed unexpectedly!" if ($ret == 1); if ($args{fatal}) { set_var("_ACNMP_DONE", "1"); die $message; } else { # if we're already in post_fail_hook, we don't want to die again record_info $message; } } } sub select_rescue_mode { # handle bootloader screen assert_screen "bootloader", 30; if (get_var('OFW')) { # select "rescue system" directly send_key "down"; send_key "down"; send_key "ret"; } else { # select troubleshooting send_key "down"; send_key "ret"; # select "rescue system" if (get_var('UEFI')) { send_key "down"; # we need this on aarch64 till #1661288 is resolved if (get_var('ARCH') eq 'aarch64') { send_key "e"; # duped with do_bootloader, sadly... for (1 .. 50) { send_key 'down'; } sleep 1; send_key 'up'; sleep 1; send_key 'up'; send_key "end"; type_safely " console=tty0"; send_key "ctrl-x"; } else { send_key "ret"; } } else { type_string "r\n"; } } assert_screen "rescue_select", 180; # it takes time to start anaconda } sub copy_devcdrom_as_isofile { # copy /dev/cdrom as iso file and verify checksum is same # as cdrom previously retrieved from ISO_URL my $isoname = shift; assert_script_run "dd if=/dev/cdrom of=$isoname", 360; # verify iso checksum my $cdurl = get_var('ISO_URL'); # ISO_URL may not be set if we POSTed manually or something; just assume # we're OK in that case return unless $cdurl; my $cmd = </tmp/x sha256sum -c /tmp/x EOF assert_script_run($_) foreach (split /\n/, $cmd); } sub menu_launch_type { # Launch an application in a graphical environment, by opening a # launcher, typing the specified string and hitting enter. Pass # the string to be typed to launch whatever it is you want. my $app = shift; # To overcome BZ2097208, let's move the mouse out of the way # and give the launcher some time to take the correct focus. if (get_var("DESKTOP") eq "kde") { diag("Moving the mouse away from the launcher."); mouse_set(1, 1); } send_key 'super'; # srsly KDE y u so slo wait_still_screen 3; type_very_safely $app; # Wait for KDE to place focus correctly. sleep 2; send_key 'ret'; } sub tell_source { # This helper function identifies the Subvariant of the tested system. # For the purposes of identification testing, we are only interested # if the system is Workstation, Server, or something else, because, # except Workstation and Server, there are no graphical differences # between various spins and isos. my $iso = get_var('SUBVARIANT'); $iso = lc($iso); if ($iso eq 'workstation' or $iso eq 'server') { # do nothing, but don't hit else } elsif ($iso eq 'atomichost') { $iso = 'atomic'; } elsif ($iso eq 'silverblue') { $iso = 'workstation'; } else { $iso = 'generic'; } return $iso; } sub check_left_bar { # This method is used by identification tests to check whether the Anaconda # bar on the left side of the screen corresponds with the correct version. # It looks different for Server, Workstation and others. my $source = tell_source; assert_screen "leftbar_${source}"; } sub check_top_bar { # This method is used by identification tests to check whether the # top bar in Anaconda corresponds with the correct version of the spin. my $source = tell_source; assert_screen "topbar_${source}"; } sub check_prerelease { # This method is used by identification tests to check if # Anaconda shows the PRERELEASE tag on various screens. These are # the rules anaconda follows for deciding whether to do this, as # of 2020-05-07: # 1. If there's a /.buildstamp and/or /tmp/product/.buildstamp file # the installer environment, and/or the environment variable # PRODBUILDPATH is set and points to a file that exists, it reads # config from those file(s), in that order of precedence, and if # the key 'IsFinal' exists in the section 'Main', its value is # used as anaconda's `product.isFinal`. Installer images built by # lorax have this buildstamp file, and it always sets IsFinal: if # --isfinal was passed to lorax it is set to True, if not it is set # to False. Whether lorax is run with --isfinal can be specified # in the Pungi config, but there's also a heuristic: it usually # defaults to False, but if the compose has a label and it's an # 'RC' or 'Update' or 'SecurityFix' compose (see definition of # SUPPORTED_MILESTONES in productmd.composeinfo), the default is # True. AFAICS, Fedora's pungi configs don't explicitly set this, # but rely on the heuristic. So for installer images, we expect # isFinal to be True for RC candidate composes and post-release # nightly Cloud, IoT etc. composes (these are also marked as 'RC' # composes), but False for Rawhide and Branched nightly composes # and Beta candidate composes. For installer images built by our # own _installer_build test, we control whether --isfinal is set # or not; we pass it if the update is for a stable release, we do # not pass it if the update is for Branched. Live images do not # have the buildstamp file. # 2. If there's no buildstamp file, the value of the environment # variable ANACONDA_ISFINAL is used as `product.isFinal`, default # of False if that environment var is not set. The live installer # wrapper script sets ANACONDA_ISFINAL based on the release field # of whatever package provides system-release: if it starts with # "0.", it sets ANACONA_ISFINAL to "false", otherwise it sets it # to "true". So for live images, we expect isFinal to be True # unless the fedora-release-common package release starts with 0. # 3. If `product.isFinal` is False, the pre-release warning and # tags are shown; if it is False, they are not shown. # We don't really need to check this stuff for update tests, as # the only installer images we test on updates are ones we build # ourselves; there's no value to this check for those really. # For compose tests, we will expect to see the pre-release tags if # the compose is Rawhide, or a Beta candidate, or it's a nightly # and we're checking an installer image. If it's an RC or Updates # candidate, or a respin release, we expect NOT to see the tags. # If it's a nightly and we're checking a live image, we don't do # the check. # bail if this is an update test return if (get_var("ADVISORY_OR_TASK")); # 0 means "tags MUST NOT be shown", 1 means "tags MUST be shown", # any other value means we don't care my $prerelease = 10; # if this is RC or update compose we absolutely *MUST NOT* see tags my $label = get_var("LABEL"); $prerelease = 0 if ($label =~ /^(RC|Update)-/); # if it's a Beta compose we *MUST* see tags $prerelease = 1 if ($label =~ /^Beta-/); my $version = get_var('VERSION'); # if it's Rawhide we *MUST* see tags $prerelease = 1 if ($version eq "Rawhide"); my $build = get_var('BUILD'); # if it's a nightly installer image we should see tags $prerelease = 1 if ($build =~ /\.n\.\d+/ && !get_var("LIVE")); # if it's a respin compose we *MUST NOT* see tags $prerelease = 0 if ($build =~ /Respin/); # we *could* go to a console and parse fedora-release-common # to decide if a nightly live image should have tags or not, but # it seems absurd as we're almost reinventing the code that # decides whether to show the tags, at that point, and it's not # really a big deal either way whether a nightly live image has # the tags or not. So we don't. # For all prerelease requiring ISOs, assert that prerelease is there. if ($prerelease == 1) { assert_screen "prerelease_note"; } elsif ($prerelease == 0) { # If the prerelease note is shown, where it should not be, die! if (check_screen "prerelease_note") { die "The PRERELEASE tag is shown, but it should NOT be."; } } } sub check_version { # This function checks if the correct version is display during installation # in Anaconda, i.e. nonlive media showing Rawhide when Rawhide and version numbers # when not Rawhide, while live media always showing version numbers. my $version = lc(get_var('VERSION')); if ($version eq 'rawhide' && get_var('LIVE')) { $version = get_var('RAWREL'); } assert_screen "version_${version}_ident"; } sub spell_version_number { my $version = shift; # spelt version of Rawhide is...Rawhide return "Rawhide" if ($version eq 'Rawhide'); my %ones = ( "0" => "Zero", "1" => "One", "2" => "Two", "3" => "Three", "4" => "Four", "5" => "Five", "6" => "Six", "7" => "Seven", "8" => "Eight", "9" => "Nine", ); my %tens = ( "2" => "Twenty", "3" => "Thirty", "4" => "Forty", "5" => "Fifty", "6" => "Sixty", "7" => "Seventy", "8" => "Eighty", "9" => "Ninety", ); my $ten = substr($version, 0, 1); my $one = substr($version, 1, 1); my $speltnum = ""; if ($one eq "0") { $speltnum = "$tens{$ten}"; } else { $speltnum = "$tens{$ten} $ones{$one}"; } return $speltnum; } sub rec_log { my ($line, $condition, $failref, $filename) = @_; $filename ||= '/tmp/os-release.log'; if ($condition) { $line = "${line} - SUCCEEDED\n"; } else { push @$failref, $line; $line = "${line} - FAILED\n"; } script_run "echo \"$line\" >> $filename"; } # In each application test, when the application is started successfully, it # will register to the list of applications. sub register_application { my $application = shift; push(@application_list, $application); print("APPLICATION REGISTERED: $application \n"); } # The KDE desktop tests are very difficult to maintain, because the transparency # of the menu requires a lot of different needles to cover the elements. # Therefore it is useful to change the background to a solid colour. # Since many needles have been already created with a black background # we will keep it that way. The following code has been taken from the # KDE startstop tests but it is good to have it here, because it will be # needed more often now, it seems. sub solidify_wallpaper { my $desktop = get_var("DESKTOP"); if ($desktop eq "kde") { # Run the Desktop settings hold_key 'alt'; send_key 'd'; send_key 's'; release_key 'alt'; # give the window a few seconds to stabilize wait_still_screen 3; # Select type of background assert_and_click "deskset_select_type"; wait_still_screen 2; # Select plain color type assert_and_click "deskset_plain_color"; wait_still_screen 2; # Open colors selection assert_and_click "deskset_select_color"; wait_still_screen 2; # Select black assert_and_dclick "deskset_html_color"; wait_still_screen 2; type_safely "000000"; wait_still_screen 2; # Confirm assert_and_click "kde_ok"; wait_still_screen 2; # Close the application assert_and_click "kde_ok"; } elsif ($desktop eq "gnome") { # Start the terminal to set up backgrounds. menu_launch_type "gnome-terminal"; # wait to be sure it's fully open wait_still_screen(stilltime => 5, similarity_level => 38); # When the application opens, run command in it to set the background to black type_very_safely "gsettings set org.gnome.desktop.background picture-uri ''"; send_key 'ret'; wait_still_screen(stilltime => 2, similarity_level => 38); type_very_safely "gsettings set org.gnome.desktop.background primary-color '#000000'"; send_key 'ret'; wait_still_screen(stilltime => 2, similarity_level => 38); quit_with_shortcut(); # check that is has changed color assert_screen 'apps_settings_screen_black'; } } # This routine is used in Desktop test suites, such as Evince or Gedit. # It checks if git is installed and installs it, if necessary. sub check_and_install_git { unless (get_var("CANNED")) { if (script_run("rpm -q git")) { assert_script_run("dnf install -y git"); } } } # This routine is used in Desktop test suites. It downloads the test data from # the repository and populates the directory structure. # The data repository is located at https://pagure.io/fedora-qa/openqa_testdata. sub download_testdata { # We can select which Data to copy over. my $data = shift; $data = 'structure' unless ($data); # Navigate to the user's home directory my $user = get_var("USER_LOGIN") // "test"; assert_script_run("cd /home/$user/"); # Create a temporary directory to unpack the zipped file. assert_script_run("mkdir temp"); assert_script_run("cd temp"); # Download the compressed file with the repository content. assert_script_run("curl --retry-delay 10 --max-time 120 --retry 5 -o repository.tar.gz https://pagure.io/fedora-qa/openqa_testdata/blob/thetree/f/repository.tar.gz", timeout => 600); # Untar it. assert_script_run("tar -zxvf repository.tar.gz"); # Copy out the files into the VMs directory structure. if ($data eq "structure") { assert_script_run("cp music/* /home/$user/Music"); assert_script_run("cp documents/* /home/$user/Documents"); assert_script_run("cp pictures/* /home/$user/Pictures"); assert_script_run("cp video/* /home/$user/Videos"); assert_script_run("cp reference/* /home/$user/"); } else { assert_script_run("mkdir /home/$user/$data"); assert_script_run("cp $data/* /home/$user/$data/"); } # Delete the temporary directory and the downloaded file. assert_script_run("cd"); assert_script_run("rm -rf /home/$user/temp"); # Change ownership assert_script_run("chown -R test:test /home/$user/"); } # On Fedora, the serial console is not writable for regular users which lames # some of the openQA commands that send messages to the serial console to check # that a command has finished, for example assert_script_run, etc. # This routine changes the rights on the serial console file and makes it # writable for everyone, so that those commands work. This is actually very useful # for testing commands from users' perspective. The routine also handles becoming the root. # We agree that this is not the "correct" way, to enable users to type onto serial console # and that it correctly should be done via groups (dialout) but that would require rebooting # the virtual machine. Therefore we do it this way, which has immediate effect. sub make_serial_writable { become_root(); sleep 2; # Make serial console writable for everyone. enter_cmd("chmod 666 /dev/${serialdev}"); sleep 2; # Exit the root account enter_cmd("exit"); sleep 2; } # Sometimes, especially in between freezes, there are Software Updates available # that trigger a notification pop-up which covers some part of the screen # and possibly steals focus from the applications, thus making tests to fail. # This will set the update notification timestamp to the current time (-30 seconds), # forcing the notification mechanism to think it already had notified. # Note, that this has to be run under the user under which the tests run, # not root. sub set_update_notification_timestamp { # Get the current time my $ep_time = time(); # Subtract 30 seconds from the number. $ep_time -= 30; # Run a command using the command dialogue send_key('alt-f2'); wait_still_screen(2); # Set the new timestamp using the gsettings command. type_very_safely("gsettings set org.gnome.software update-notification-timestamp $ep_time\n"); } 1;