package anaconda; use strict; use base 'Exporter'; use Exporter; use testapi; use utils; our @EXPORT = qw/select_disks custom_scheme_select custom_blivet_add_partition custom_change_type custom_change_fs custom_change_device custom_delete_part get_full_repo get_mirrorlist_url/; sub select_disks { # Handles disk selection. Has one optional argument - number of # disks to select. Should be run when main Anaconda hub is # displayed. Enters disk selection spoke and then ensures that # required number of disks are selected. Additionally, if # PARTITIONING variable starts with custom_, selects "custom # partitioning" checkbox. Example usage: # after calling `select_disks(2);` from Anaconda main hub, # installation destination spoke will be displayed and two # attached disks will be selected for installation. my %args = ( disks => 1, iscsi => {}, @_ ); my %iscsi = %{$args{iscsi}}; # Anaconda hub assert_screen "anaconda_main_hub", 300; # # Damn animation delay can cause bad clicks here too - wait for it sleep 1; assert_and_click "anaconda_main_hub_install_destination"; if (get_var('NUMDISKS') > 1) { # Multi-disk case. Select however many disks the test needs. If # $disks is 0, this will do nothing, and 0 disks will be selected. for my $n (1 .. $args{disks}) { assert_and_click "anaconda_install_destination_select_disk_$n"; } } else { # Single disk case. if ($args{disks} == 0) { # Clicking will *de*-select. assert_and_click "anaconda_install_destination_select_disk_1"; } elsif ($args{disks} > 1) { die "Only one disk is connected! Cannot select $args{disks} disks."; } # For exactly 1 disk, we don't need to do anything. } # Handle network disks. if (%iscsi) { assert_and_click "anaconda_install_destination_add_network_disk"; foreach my $target (keys %iscsi) { my $ip = $iscsi{$target}->[0]; my $user = $iscsi{$target}->[1]; my $password = $iscsi{$target}->[2]; assert_and_click "anaconda_install_destination_add_iscsi_target"; wait_still_screen 2; type_safely $ip; wait_screen_change { send_key "tab"; }; type_safely $target; # start discovery - three tabs, enter type_safely "\t\t\t\n"; if ($user && $password) { assert_and_click "anaconda_install_destination_target_auth_type"; assert_and_click "anaconda_install_destination_target_auth_type_chap"; send_key "tab"; type_safely $user; send_key "tab"; type_safely $password; } assert_and_click "anaconda_install_destination_target_login"; assert_and_click "anaconda_install_destination_select_target"; } assert_and_click "anaconda_spoke_done"; } # If this is a custom partitioning test, select custom partitioning. For testing blivet-gui, # name of test module should start with custom_blivet_, otherwise it should start with custom_. if (get_var('PARTITIONING') =~ /^custom_blivet_/) { assert_and_click "anaconda_manual_blivet_partitioning"; } elsif (get_var('PARTITIONING') =~ /^custom_/) { assert_and_click "anaconda_manual_partitioning"; } } sub custom_scheme_select { # Used for setting custom partitioning scheme (such as LVM). # Should be called when custom partitioning spoke is displayed. # Pass the name of the partitioning scheme. Needle # `anaconda_part_scheme_$scheme` should exist. Example usage: # `custom_scheme_select("btrfs");` uses needle # `anaconda_part_scheme_btrfs` to set partition scheme to Btrfs. my ($scheme) = @_; assert_and_click "anaconda_part_scheme"; # Move the mouse away from the menu mouse_set(10, 10); assert_and_click "anaconda_part_scheme_$scheme"; } sub custom_blivet_add_partition { # Used to add partition on blivet-gui partitioning screen # in Anaconda. Should be called when blivet-gui is displayed and free space is selected. # You can pass device type for partition (needle tagged anaconda_blivet_devicetype_$devicetype should exist), # whether partitions should be of RAID1 (devicetype is then automatically handled) - you then # need to have two disks added, size of that partition in MBs, desired filesystem of that partition # (anaconda_blivet_part_fs_$filesystem should exist) and mountpoint of that partition (e. g. string "/boot"). my %args = ( devicetype => "", raid1 => 0, size => 0, filesystem => "", mountpoint => "", @_ ); $args{devicetype} = "raid" if $args{raid1}; assert_and_click "anaconda_blivet_part_add"; mouse_set(10, 10); if ($args{devicetype}) { assert_and_click "anaconda_blivet_part_devicetype"; mouse_set(10, 10); assert_and_click "anaconda_blivet_part_devicetype_$args{devicetype}"; } if ($args{raid1}) { # for RAID1, two disks should be selected send_key "tab"; send_key "down"; send_key "spc"; assert_screen "anaconda_blivet_vdb_selected"; assert_and_click "anaconda_blivet_raidlevel_select"; mouse_set(10, 10); assert_and_click "anaconda_blivet_raidlevel_raid1"; } if ($args{size}) { type_safely "\t\t"; # if we clicked on "raidlevel" before, we need to type only two tabs, # otherwise size input box is still one tab away if (!$args{raid1}) { send_key "tab"; } # size input can contain whole set of different values, so we can't match it with needle type_safely $args{size} . "\n"; } # if no filesystem was specified or filesystem is already selected, do nothing if ($args{filesystem} && !check_screen("anaconda_blivet_part_fs_$args{filesystem}_selected", 5)) { assert_and_click "anaconda_blivet_part_fs"; # Move the mouse away from the menu mouse_set(10, 10); assert_and_click "anaconda_blivet_part_fs_$args{filesystem}"; } if ($args{mountpoint}) { assert_and_click "anaconda_blivet_mountpoint"; type_safely $args{mountpoint} . "\n"; } assert_and_click "anaconda_blivet_btn_ok"; # select "free space" in blivet-gui if it exists, so we could run this function again to add another partition if (check_screen("anaconda_blivet_free_space", 5)) { assert_and_click "anaconda_blivet_free_space"; } } sub custom_change_type { # Used to set different device types for specified partition (e.g. # RAID). Should be called when custom partitioning spoke is # displayed. Pass it type of partition and name of partition. # Needles `anaconda_part_select_$part` and # `anaconda_part_device_type_$type` should exist. Example usage: # `custom_change_type("raid", "root");` uses # `anaconda_part_select_root` and `anaconda_part_device_type_raid` # needles to set RAID for root partition. my ($type, $part) = @_; $part ||= "root"; assert_and_click "anaconda_part_select_$part"; assert_and_click "anaconda_part_device_type"; # Move the mouse away from the menu mouse_set(10, 10); assert_and_click "anaconda_part_device_type_$type"; assert_and_click "anaconda_part_update_settings"; } sub custom_change_fs { # Used to set different file systems for specified partition. # Should be called when custom partitioning spoke is displayed. # Pass filesystem name and name of partition. Needles # `anaconda_part_select_$part` and `anaconda_part_fs_$fs` should # exist. Example usage: # `custom_change_fs("ext3", "root");` uses # `anaconda_part_select_root` and `anaconda_part_fs_ext3` needles # to set ext3 file system for root partition. my ($fs, $part) = @_; $part ||= "root"; assert_and_click "anaconda_part_select_$part"; # if fs is already set correctly, do nothing return if (check_screen "anaconda_part_fs_${fs}_selected", 5); assert_and_click "anaconda_part_fs"; # Move the mouse away from the menu mouse_set(10, 10); assert_and_click "anaconda_part_fs_$fs"; assert_and_click "anaconda_part_update_settings"; } sub custom_change_device { my ($part, $devices) = @_; assert_and_click "anaconda_part_select_$part"; assert_and_click "anaconda_part_device_modify"; foreach my $device (split(/ /, $devices)) { assert_and_click "anaconda_part_device_${device}"; } assert_and_click "anaconda_part_device_select"; assert_and_click "anaconda_part_update_settings"; } sub custom_delete_part { # Used for deletion of previously added partitions in custom # partitioning spoke. Should be called when custom partitioning # spoke is displayed. Pass the partition name. Needle # `anaconda_part_select_$part` should exist. Example usage: # `custom_delete_part('swap');` uses needle # `anaconda_part_select_swap` to delete previously added swap # partition. my ($part) = @_; return if not $part; assert_and_click "anaconda_part_select_$part"; assert_and_click "anaconda_part_delete"; } sub get_full_repo { my ($repourl) = @_; # trivial thing we kept repeating: fill out an HTTP or HTTPS # repo URL with flavor and arch, leave NFS ones alone (as for # NFS tests we just use a mounted ISO and the URL is complete) if ($repourl !~ m/^nfs/) { $repourl .= "/Everything/".get_var("ARCH")."/os"; } return $repourl; } sub get_mirrorlist_url { return "mirrors.fedoraproject.org/mirrorlist?repo=fedora-" . lc(get_var("VERSION")) . "&arch=" . get_var('ARCH'); }