The font Firefox uses when we don't ensure dejavu is installed
seems to bounce around a bit, so let's ensure the dejavu fonts
are there before we start Firefox. Also update a needle for
this.
Seems like it doesn't display "Initial setup for Fedora 27" any
more, so the old needle doesn't match. We should look into
whether that's a bug, but for now, let's update the needle.
Matching on the user name really isn't doing much good. It just
means we need more variant needles. Let's ditch that part of the
match and just match on the distinctive character sequence ~]$,
which doesn't really occur for any other reason. With this we
can drop the separate 'qwerty' needle (since the qwerty case
will match the regular needle now) and should also handle the
FreeIPA tests that are failing in Rawhide because a logged in
FreeIPA user doesn't just have a sh prompt now.
We can deal with this annoying bug by looking out for the error
we see when it happens, hitting the 'refresh' button again, and
resetting the loop counter to 1 (requires changing the loop to
a C-style loop).
This is required because anaconda is still checking for it
even if not mandatory. Already tracked by bug
https://bugzilla.redhat.com/show_bug.cgi?id=1172791
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
related to known bug
https://bugzilla.gnome.org/show_bug.cgi?id=771127
like other needles with same bgo#771127 reference
do not set it as Workaround needle.
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
* New OFW variable to identify Open Firmware (used by PowerPC)
* Few needles changes for PowerPC support
* as requested do not change the timers value below for PowerPC
tests/install_source_graphical.pm (300 to 600)
tests/_boot_to_anaconda.pm (300 to 1200)
This will be handled by TIMEOUT_SCALE in templates
Signed-off-by: Guy Menanteau <menantea@linux.vnet.ibm.com>
There's a bug in current Rawhide causing sourcing of /etc/bashrc
to fail when logging in as a regular user. This results in the
bash prompt looking different, which is currently a hard fail,
and causes most tests to die. It's better to treat this as a
soft fail so the rest of the test can run. So add a needle to
spot this case, and a little finish function the console login
function calls whenever it's successfully logged in, to check
whether it got the no-profile prompt and register a soft fail.
That other one didn't help, so let's try this - try and spot if
the spoke is in the unexpected state (the needle should only
match if the spoke is done processing and still in warning
state, it shouldn't match while the needle is still thinking)
and click through it again if so.
Well, that OCR needle isn't working out so great, as it seems
to match when it shouldn't:
https://openqa.fedoraproject.org/tests/119217#step/_graphical_wait_login/5
So let's try another approach. Ditch the OCR needle and have a
function for checking we're at a clean desktop. It does the
normal needle match, but if we're on GNOME, it also tries
hitting alt+f1 and seeing if we're at the overview; if so, it
hits alt+f1 again (to go back to the desktop) and returns.
https://openqa.fedoraproject.org/tests/117131 shows a spurious
match of the anaconda warning_bar needle - it's matching in an
ad for LibreOffice. Add a bit of the grey above the bar, so
hopefully this won't happen any more.
The F26 background does not change with the time of day, so that
needle should serve as-is, it's just no use for Rawhide. For
Rawhide, let's try a needle with an OCR match on 'Activities',
plus a tiny match area for a pure white block (expected to be
matched in the user menu area), since os-autoinst requires all
needles to include a match area for some reason.
These are no use :/ The Rawhide default background is a 'changes
with the time of day' one, and with the transparent top bar,
that makes a proper needle match impossible to reliably achieve,
as there is not a single pixel of the 'clean desktop' which
will always be the same any more. We'll have to come up with
something else. I'm trying out the use of an OCR match now.
The GNOME top bar is now transparent in Rawhide, which broke the
'clean desktop' needle. It also means it'll break every time
the background changes, from now on :( Update the needle.
Seems like the top '[patch]' link on kernel.org may now be a
raw patch file which the browser just displays, not a compressed
patch it offers to download. So tweak the needle so we should
click on the *bottom* link instead. openQA looks for matches
as close as possible to the location in the needle.
When running universal tests with a non-Server image, which is
not common but *does* happen (e.g. manually built test image),
the pre-selected filesystem in blivet-gui will be ext4 not xfs
(just as with custom partitioning). So we need xfs and ext4
variants of this needle. Renamed the XFS one for consistency.
Summary:
This adds a new test suite, run for Workstation and KDE live
images, which does not create a user during install. It then
expects initial-setup (KDE) or gnome-initial-setup (Workstation)
to appear after install, creates a user, and proceeds with
normal boot.
Note the ARM image test already covers the initial-setup text
mode, and the ARM minimal image is the only case where that
actually matters (it's not included in Server).
Test Plan:
Run the new tests, check they work. Run all old
tests, check the changes didn't break them.
Reviewers: jsedlak, jskladan
Reviewed By: jsedlak
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1185
They got rid of the 'Dashboard' text we were matching on, so
let's change this needle. This 'Hardware' text should show up
in all cockpit versions, I think.
Summary:
This is to handle cases like #1414904 , where the system boots
to emergency mode. We really need logs to try and debug this.
Test Plan:
Force a test to hit emergency mode somehow (right now
you can just run base_services_start on Rawhide over and over
until you hit #1414904, but there's probably an easier way to
do it, I think there's a systemd boot arg to tell it which target
to boot for e.g.) and check logs get uploaded. Also check this
doesn't break log upload for a 'normal' failure.
Reviewers: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Reviewed By: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1103
openQA has some problems handling needles with identical names
in different subdirectories. We haven't had the cycles to send
fixes for this yet, so for now, let's just rename all such
needles we have.
Not sure if the color change will occur in Fedora 25 nightlies
or not, so not sure if we can remove the old needles. But we
*can* remove the F24 needles now I think.
Summary:
Since 26.17, anaconda shows a warning when the user password
contains non-ASCII characters, and requires a second Done click
to confirm. This change should handle that.
On the 'catch cases where password typing went wrong and re-try'
bit: to keep that, but not re-type the password *every single
time* on the Russian install test, we'd have to make the needle
match the text of the warning. This is problematic because then
that needle will be able to break without us easily noticing;
that's why I wanted to keep the 'warning bar' needle text-free.
Unfortunately, that means we have to skip the protection for
switched-layout installs.
Note the protection was actually not working for any non-English
install anyhow, because the needle had `LANGUAGE-english` as a
tag. We never noticed that. Failed password typing is pretty
rare now, so we can live without the protection - it's just nice
to have it for the English install tests because there's so many
of them.
Test Plan:
Run the Russian install with a recent Rawhide image,
check it clicks 'Done' twice. Note, it will still fail, because
of RHBZ #1413813.
Reviewers: jskladan, garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Reviewed By: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1084
The F25 'desktopencrypt' images built by createhdds boot to a
console passphrase entry screen, not graphical. F24 images
built the same way boot to a graphical passphrase entry screen.
I'm not sure why, but it's not really worth spending a lot of
energy on, I don't think - let's just add a needle to cover
this case.
Summary:
Include some basic testing of Japanese input, and split the
input testing (including Russian) into a separate module, since
it's not really part of 'login' testing.
Test Plan:
Run the test, and the Russian and French tests too to
make sure they didn't break. Tested on staging. Note the Japanese
test soft fails, intentionally, at present, as I discovered a bug
while working on it:
https://bugzilla.gnome.org/show_bug.cgi?id=776189
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1072
Summary:
This isn't in the criteria, but it's commonly used, so we ought
to test this way. Require authentication for the iSCSI target
and have the test provide the appropriate auth info.
Test Plan:
Run the iscsi test and check it works (you need the
recent fixes for support_server to make *that* work). Nothing
else should be affected.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1070
Summary:
The non-English tests so far did not test that graphical login
worked as expected, which is a fairly large hole. With this
change, they should do a Workstation install and test login to
both GNOME and the console works as expected. KDE is not yet
tested.
As part of this we tweak the implementation of keyboard layout
switching in graphical environments to use a generic function
in main_common which can handle both anaconda and desktops
(just GNOME at present, but should extend easily to any desktop
with a known switcher key and a visible layout indicator),
replacing the anacondatest class method. I kinda don't like that
the test has to specifically tell the function when it's in
anaconda, but I don't think I want to start experimenting with
a global 'test phase' openQA variable or anything like that at
present.
Fixes T842.
Test Plan:
Run the French and Russian install tests and check
they work as expected. Also run an English Workstation install
if you like, and make sure that didn't break. This change is
live on staging ATM, seems to work fine.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Maniphest Tasks: T842
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1071
Summary:
GNOME's update notification criteria are pretty braindead: it
fires the update check timer once on login then once every hour
thereafter, but only actually checks for and notifies of updates
once a day if it's after 6am(?!?!?!). So we have to do a bunch
of fiddling around to ensure we reliably get a notification.
Move the clock to 6am if it's earlier than that, and reset the
'last update check' timer to 48 hours ago, then log in to GNOME
after that.
Note: I thought this still wasn't fully reliable, but I've looked
into all the recent failures of either test on staging and
there's only one which was really 'no update notification came
up', and the logs clearly indicate PK did run an update check,
so I don't think that was a test bug (I think something went
wrong with the update check). The other failures are all 'GNOME
did something wacky', plus one case where the needle didn't quite
match because I think the match area is slightly too tall; I'll
fix that in a second.
Test Plan:
Run the tests on both KDE and GNOME and check they
work properly now (assuming nothing unrelated breaks, like KDE
crashing...)
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1039
OK, we once again hit an annoying case where the button match
that doesn't include text got matched in the sidebar:
https://openqa.fedoraproject.org/tests/39576#step/_do_install_and_reboot/13
so I think it's time to give up on that approach and just go
ahead and deal with the button text varying between live and
traditional installs. So let's change the existing needles to
include the button text and add one new needle to cover the
English live F25/F26 case. I don't think we need a 'quit'
needle for F24 (as the only thing we test for F24 is the Atomic
installer image, which says 'Reboot') or for French or Russian
(as we only test a traditional installer image for those, not
a live image).
Summary:
I started out wanting to fix an issue I noticed today where
graphical upgrade tests were failing because they didn't wait
for the graphical login screen properly; the test was sitting
at the 'full Fedora logo' state of plymouth for a long time,
so the current boot_to_login_screen's wait_still_screen was
triggered by it and the function wound up failing on the
assert_screen, because it was still some time before the real
login screen appeared.
So I tweaked the boot_to_login_screen implementation to work
slightly differently (look for a login screen match, *then* -
if we're dealing with a graphical login - wait_still_screen
to defeat the 'old GPU buffer showing login screen' problem
and assert the login screen again). But while working on it,
I figured we really should consolidate all the various places
that handle the bootloader -> login, we were doing it quite
differently in all sorts of different places. And as part of
that, I converted the base tests to use POSTINSTALL (and thus
go through the shared _wait_login tests) instead of handling
boot themselves. As part of *that*, I tweaked main.pm to not
require all POSTINSTALL tests have the _postinstall suffix on
their names, as it really doesn't make sense, and renamed the
tests.
Test Plan: Run all tests, see if they work.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1015
When a package is unsigned, KDE will prompt for authentication.
Let's handle this. But count it as a soft fail, because
puiterwijk claims that Rawhide packages will be autosigned
from next week, so this *should* not happen and would indicate
an unsigned package in the repos. We make the KDE 'update
complete' needle area smaller because the wider area includes
some transparency and so will only match if the update applet
is open; this area will match whether it's open (no auth case)
or not open (auth case - the applet seems to disappear after
you provide the password in the auth prompt).
Pushing without review as the test is in production so I want
to make sure it works correctly.
(Also, hey, check out that array match for assert_screen and
that match_has_tag! This is gonna make some things so much
easier...thanks upstream)
Summary:
this more or less covers desktop_error_checks and desktop_
update_notification, though it can't really distinguish
between them easily. All we know is that if both the live and
postinstall versions of this test pass, both of those tests
pass. Any fails will have to be investigated manually.
Test Plan:
Run the tests for both KDE and Workstation, see
what happens. Workstation will fail for F25 and Rawhide at
present, due to SELinux/abrt notifications.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1004
Summary:
Very similar to the CLI update test, but using the desktops'
update applications. This is based off the CLI update test
branch as it uses the shared functions that branch introduced.
We do not use the fake update packages, as they don't really
do anything useful for these tests; for dnf they can help us
distinguish between issues with the dnf mechanism and issues
with the repos, but we can't really tell that in the graphical
case. So we only use the python3-kickstart package here.
Test Plan:
Run the test on both KDE and GNOME and ensure it
performs as intended. I've been testing it on staging, so you
can see it there.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1010
Summary:
by waiting for the bootloader in _boot_to_anaconda rather than
_console_wait_login, we can ensure that we use the anaconda
post-fail hook and thus get logs uploaded when a kickstart
install fails.
Test Plan:
Run a kickstart install test that fails and check
anaconda logs get uploaded. Then run one that works and make
sure it...still works.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1005
Guy Menanteau
Adam Williamson
Michel Normand
Jan Sedlák