Somehow, recently, FreeIPA tests are running into Firefox not
quitting because it's showing a warning about closing multiple
tabs. (I think we didn't *get* multiple tabs before but now we
do, for some reason). So let's work around this by clicking
"Close tabs" if the warning appears.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
For some reason, in recent tests, switching to a console after
live install completes is taking a long time, and tests are
failing because we 'only' allow 10 seconds for the login prompt
to appear. This seems to indicate some kind of performance bug,
but we don't really want all liveinst tests to fail on in, this
is not primarily a performance testing framework. So let's
tweak the root_console / console_login bits a bit to allow a
configurable timeout for the login prompt to appear, and use
that to wait 30 secs instead of 10 in this case.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Looking at this, it's a bit weird: the updated packages are
actually included in the upgrade process, but we still run
_advisory_update, which does basically nothing...then reboots.
That's kinda silly and makes the tests a bit flaky, let's fix
it. I don't think there's actually any problem with doing the
upload of updatepkgs.txt in _repo_setup_updates, becase that
already guards against being run more than once, it just bails
very early if it's already been run.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There seems to be a bug in Rawhide lately where, when our tests
want to install a bare X and run Firefox on it, this takes an
unusually long time to start up, with SELinux in enforcing mode.
With SELinux in permissive mode it starts as fast as usual. This
isn't a hard failure and we don't want it to block all later
tests, so let's handle it and treat it as a soft fail.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
OK, we now need to work around this goddamn grub bug in *three*
places, so let's stop copying the loop around and factor it out
instead. The third place is encrypted installs, as they wait
for the decryption prompt on boot.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Per Neal Gompa boot will proceed if we just page through the
error(?) messages displayed when #1618928 happens, so let's do
that to let the tests get further and see what else is broken.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It seems that for some reason the localized layout gets loaded
on the installer VTs by this point in time, so we need to load
'us' again for this complex command to work.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Upstream is gonna change the default from 30 to 0, it seems:
https://github.com/os-autoinst/os-autoinst/pull/965
so let's go ahead and change these two cases where we have no
explicit timeout to have one.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The reason we have all this horrible code to use the commented-
out baseurl lines in the repo files instead of the metalinks
that are usually used is a timing issue with the metalink
system. As a protection against stale mirrors, the metalink
system sends the package manager a list of mirrors *and a list
of recent checksums for the repo metadata*. The package manager
goes out and gets the metadata from the first mirror on the
list, then checksums it; if the checksum isn't on the list of
checksums it got from mirrormanager, it assumes that means the
mirror is stale, and tries the next on the list instead.
The problem is that MM's list of checksums is currently only
updated once an hour (by a cron job). So we kept running into
a problem where, when a test ran just after one of the repos
had been regenerated, the infra mirror it's supposed to use
would be rejected because the checksum wasn't on the list - but
not because the mirror was stale, but because it was too fresh,
it had got the new packages and metadata but mirrormanager's
list of checksums hadn't been updated to include the checksum
for the latest metadata.
All this baseurl munging code was getting ridiculous, though,
what with the tests getting more complicated and errors showing
up in the actual repo files and stuff. It occurred to me that
instead of using the baseurl we can just use the 'mirrorlist'
system instead of 'metalink'. mirrorlist is the dumber, older
system which just provides the package manager a list of mirrors
and nothing else - the whole stale-mirror-detection-checksum
thing does not happen with mirrorlists, the package manager just
tries all the mirrors in order and uses the first that works.
And happily, it's very easy to convert the metalink URLs into
mirrorlist URLs, and it saves all that faffing around trying to
fix up baseurls.
Also, adjust upgrade_boot to do the s/metalink/mirrorlist/
substitution, so upgrade tests don't run into the timing issue
in the steps before the main repo_setup run is done by
upgrade_run, and adjust repo_setup_compose to sub this line out
later.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Now F28 went stable, we're not disabling updates on upgrade any
more, and this bug got exposed: the location of the updates and
updates-testing repos actually changed between F27 and F28, so
the `baseurl` line from fedora-repos in F27 isn't correct for
F28. When doing an upgrade from < 28 to > 27, we need to correct
the URL when we're done installing stuff from the old release
repos but before we start trying to pull stuff from the new
release repos.
This repo munging crap is really getting fragile, it'd be great
if we could get that metadata timing issue resolved so we could
reliably use mirrormanager...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This adds the FreeIPA server and client upgrade tests to a new
updates-server-upgrade flavor which fedora_openqa will schedule
for updates. This way, we can test whether updates break
FreeIPA upgrades, which is a request the FreeIPA team made to
me. This has been deployed on staging for the last week or so
and appears to work fine.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Since gnome-initial-setup-3.28.0-5.fc28 , the g-i-s screens
that are supposed to be suppressed as part of
https://fedoraproject.org/wiki/Changes/ReduceInitialSetupRedundancy
are now suppressed on FAW installs as well as traditional ones.
So adjust the logic accordingly.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Trying to keep track of what these magic numbers mean is really
getting messy, so let's do it a bit more explicitly, using the
page names g-i-s uses internally, and lots of comments. This
should make it clearer and more maintainable when stuff changes.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
aarch64 managed to hit the problem this 'magic timeout' tries
to avoid, so let's extend it :(
e.g. https://openqa.stg.fedoraproject.org/tests/267174
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I believe this should do all the right repo modifications for
add-on Modularity (i.e. F28+ Server installs, for now).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Seems aarch64 needs 12 'down' key presses like ppc64, not 13
like x86_64. Tweak how this is done a bit; the ternary wasn't
elegant any more with the aarch64 change, so just get rid of it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This works around RHBZ #1552814, and it's not incorrect really
because the repo is always empty for Branched. I didn't do it
before because we might theoretically start using the repo for
Branched at some point in the future, and if we did that we'd
probably want it enabled for this test. But to get F28 update
tests working, let's just turn it off for now.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's a bug causing the 'getting started' screen to crash.
This doesn't really make the system unusable, so treating it
as a soft failure seems appropriate, especially as this will
unblock all the post-install tests on Workstation.
Modular composes don't include these packages, but we need them
to run the web UI tests for FreeIPA and Cockpit. This is the
most reasonable hack I can come up with for now: just use a
non-modular fedora repo to source these packages when doing
Modular compose testing.
If we ever reach an all-Modular future, these packages should
be available in Modular composes I guess, but for now they are
not.
and call save_screenshot to visually check
for debug purpose only
Also change for PowerPC the number of down key to 12
(rather than 12)
Seems to be mandatory since 20170327.
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
to avoid upgrade_server test to fail with:
"Repository fedora-source has no mirror or baseurl set."
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
* New OFW variable to identify Open Firmware (used by PowerPC)
* Few needles changes for PowerPC support
* as requested do not change the timers value below for PowerPC
tests/install_source_graphical.pm (300 to 600)
tests/_boot_to_anaconda.pm (300 to 1200)
This will be handled by TIMEOUT_SCALE in templates
Signed-off-by: Guy Menanteau <menantea@linux.vnet.ibm.com>
bodhi-client doesn't depend on the 'koji' package but does need
it to do 'bodhi updates download', which we want to do. So we
must explicitly install it here.
There's a bug in current Rawhide causing sourcing of /etc/bashrc
to fail when logging in as a regular user. This results in the
bash prompt looking different, which is currently a hard fail,
and causes most tests to die. It's better to treat this as a
soft fail so the rest of the test can run. So add a needle to
spot this case, and a little finish function the console login
function calls whenever it's successfully logged in, to check
whether it got the no-profile prompt and register a soft fail.
Well, that OCR needle isn't working out so great, as it seems
to match when it shouldn't:
https://openqa.fedoraproject.org/tests/119217#step/_graphical_wait_login/5
So let's try another approach. Ditch the OCR needle and have a
function for checking we're at a clean desktop. It does the
normal needle match, but if we're on GNOME, it also tries
hitting alt+f1 and seeing if we're at the overview; if so, it
hits alt+f1 again (to go back to the desktop) and returns.
Summary:
This adds a new test suite, run for Workstation and KDE live
images, which does not create a user during install. It then
expects initial-setup (KDE) or gnome-initial-setup (Workstation)
to appear after install, creates a user, and proceeds with
normal boot.
Note the ARM image test already covers the initial-setup text
mode, and the ARM minimal image is the only case where that
actually matters (it's not included in Server).
Test Plan:
Run the new tests, check they work. Run all old
tests, check the changes didn't break them.
Reviewers: jsedlak, jskladan
Reviewed By: jsedlak
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1185
This repo is causing problems for Branched update tests. The
repo is not available for 26 at all yet. This shouldn't be a
problem as the repo is disabled by default, but it seems that
some things - at least realmd, as used in the FreeIPA enrolment
tests - still try to update the repo's metadata when installing
packages, and fail because it 404s.
Since none of our tests actually needs this repo AFAIK, let's
just delete it in repo_setup.
Branched update tests are all failing because the baseurl in
fedora.repo is incorrect for Branched. This is a rather hacky
fix for this problem. It relies on the scheduler setting the
DEVELOPMENT variable when the update is for Branched (I named
the variable DEVELOPMENT rather than BRANCHED to be more
future-proof).
Alternative options I rejected were:
i) stick with MM links
ii) do something 'clever' to retrieve the URLs from MM
Rejected i) because the timing problem where the infra repo gets
updated before MM has the updated repodata checksums is just too
much of a problem; whenever that happens, dnf will refuse to use
the metadata from the infra repo and go pull it from an external
mirror, which can wind up timing out.
Rejected ii) because it seemed too fancy and not really any more
robust than just doing this and adapting it if Things Change In
Future (TM).
Summary:
This adds some logging related to the update testing workflow,
so we have some idea what we actually tested. We log precisely
which packages were actually downloaded from the update - this
is important as updates can be edited and when examining results
we'll want to know which packages actually got used. We also
add a new module which runs at the end of postinstall and tries
to figure out which packages from the update were installed in
the course of the test. This still isn't a guarantee the test
actually *tested them* in any way, but it at least means they
got installed successfully and didn't interfere with the test.
Test Plan:
Run the update test workflow, check the logs get
uploaded and seem accurate (sometimes some RPM garbage messages
wind up in the package log, I'm not too worried about that at
present). Run the compose test workflow and check it didn't
break.
Reviewers: jsedlak
Reviewed By: jsedlak
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1149
Summary:
This adds an entirely new workflow for testing distribution
updates. The `ADVISORY` variable is introduced: when set,
`main.pm` will load an early post-install test that sets up
a repository containing the packages from the specified update,
runs `dnf -y update`, and reboots. A new templates file is
added, `templates-updates`, which adds two new flavors called
`updates-server` and `updates-workstation`, each containing
job templates for appropriate post-install tests. Scheduler is
expected to post `ADVISORY=(update ID) HDD_1=(base image)
FLAVOR=updates-(server|workstation)`, where (base image) is one
of the stable release base disk images produced by `createhdds`
and usually used for upgrade testing. This will result in the
appropriate job templates being loaded.
We rejig postinstall test loading and static network config a
bit so that this works for both the 'compose' and 'updates' test
flows: we have to ensure we bring up networking for the tap
tests before we try and install the updates, but still allow
later adjustment of the configuration. We take advantage of the
openQA feature that was added a few months back to run the same
module multiple times, so the `_advisory_update` module can
reboot after installing the updates and the modules that take
care of bootloader, encryption and login get run again. This
looks slightly wacky in the web UI, though - it doesn't show the
later runs of each module.
We also use the recently added feature to specify `+HDD_1` in
the test suites which use a disk image uploaded by an earlier
post-install test, so the test suite value will take priority
over the value POSTed by the scheduler for those tests, and we
will use the uploaded disk image (and not the clean base image
POSTed by the scheduler) for those tests.
My intent here is to enhance the scheduler, adding a consumer
which listens out for critpath updates, and runs this test flow
for each one, then reports the results to ResultsDB where Bodhi
could query and display them. We could also add a list of other
packages to have one or both sets of update tests run on it, I
guess.
Test Plan:
Try a post something like:
HDD_1=disk_f25_server_3_x86_64.img DISTRI=fedora VERSION=25
FLAVOR=updates-server ARCH=x86_64 BUILD=FEDORA-2017-376ae2b92c
ADVISORY=FEDORA-2017-376ae2b92c CURRREL=25 PREVREL=24
Pick an appropriate `ADVISORY` (ideally, one containing some
packages which might actually be involved in the tests), and
matching `FLAVOR` and `HDD_1`. The appropriate tests should run,
a repo with the update packages should be created and enabled
(and dnf update run), and the tests should work properly. Also
test a regular compose run to make sure I didn't break anything.
Reviewers: jskladan, jsedlak
Reviewed By: jsedlak
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1143
I accidentally left the `my $self = shift` lines in these when
changing them from methods into functions, so they don't work
right at all. Whoops. Sorry.
Summary:
This adds a couple of new exporter modules, renames main_common
to utils (this is a better name: openSUSE's main_common is
functions used in main.pm, utils is what they call their module
full of miscellaneous commonly-used functions), and moves a
bunch of utility functions that were previously needlessly
implemented as instance methods in base classes into the
exporter modules. That means we can get rid of all the annoying
$self-> syntax for calling them.
We get rid of `fedorabase` entirely, as it's no longer useful
for anything. Other base classes keep the 'standard' methods
(like `post_fail_hook`) and methods which actually need to be
methods (like `root_console`, whose behaviour is different in
anacondatest and installedtest).
Test Plan:
Do a full test suite run and check everything lines
up. There should be no functional differences from before at all,
this is just a re-org.
Reviewers: jskladan, garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Reviewed By: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1080
