1
0
mirror of https://pagure.io/fedora-qa/os-autoinst-distri-fedora.git synced 2024-12-21 01:43:09 +00:00
Commit Graph

29 Commits

Author SHA1 Message Date
Lukáš Růžička
9a56adcfd0 Modify Desktop Printing test to use two different methods.
The PR introduces an improved logic to the desktop_printing.pm
that allows to use the USE_CUPS variable in templates to trigger
the installation of cups-pdf prior to the actual test.
The cups-pdf is then used as an alternative PDF printer
instead the built-in Save As PDF method.
2022-02-10 09:35:22 +01:00
Lukáš Růžička
6da1dbcdb9 Small fixes. 2021-07-28 09:15:44 +02:00
Lukáš Růžička
e0d9409c74 Create a test suite for Evince.
This PR fixes issue . It adds a test suite to test basic
functionality of Evince and brings the following features:

* test scripts for various Evince functions.
* needles to support the Evince test scripts
* new template variables `TESTPATH` and `POSTINSTALL_LOAD_ALL` (see
  below)
* new logic in `main.py` (see below)

The new variables and the new logic make it easier to create test
suites for post-installation tests. If TESTPATH is used, OpenQA
will take all tests mentioned in POSTINSTALL from that specified
TESTPATH. If both TESTPATH and POSTINSTALL_LOAD_ALL are used, then
OpenQA will run all tests it can find at the TESTPATH location.
If POSTINSTALL and POSTINSTALL_LOAD_ALL are set simultaneously,
then only POSTINSTALL will be taken into account and OpenQA will
only load tests mentioned there.
2021-07-28 08:58:23 +02:00
Lukáš Růžička
395ed61a1a Automate the Anaconda_Save_Traceback_to_Bugzilla_Text test case.
This PR adds a new test that automates the above mentioned test case.
It starts the installation in text mode using the `install_text` test
case, which it interrupts using the Anaconda crash trigger.
When the crash happens, it goes through the process of reporting
the bug to Bugzilla, checks that Bugzilla sends a positive
confirmation of the action, but also performs some REST API
calls to do a proper check and then it closes the bug to clean up.
2021-06-17 16:28:29 -07:00
Lukáš Růžička
c6d443a20f Automate the QA:Testcase_Anaconda_help.
This PR automates the mentioned testcase to test that Help can be
displayed in Anaconda during the installation. It navigates through
the available Help screens and if it can see it, it finishes.

This test runs after `install_default_upload` to override the
installation defaults defined for all primary tests.

Delete a duplicated needle.

Reformat list extensions to make it nicer.

Get rid of wrong export and an empty line.

Delete empty line.

Use _boot_to_anaconda for booting and move subroutine accordingly.

Add variable to templates.fif.json

Delete trailing whitespace.

Fix calling the pretest.

Move help checking to another place.
2021-05-27 21:39:26 +00:00
Adam Williamson
acc46464f8 Revise release variable handling, prerelease checks, os-release
I started out trying to fix os-release for the recent change to
add "Prerelease" tags to the VERSION and PRETTY_NAME fields, then
things spiralled. It got me thinking about the awkward DEVELOPMENT
variable we use, so I decided to get rid of it and refactor the
few things that use it. I refactored the anaconda prerelease tag
check, and wrote a new giant comment that gives details about
exactly how anaconda decides whether to show those tags, to give
context to our choices about when to expect them. This check now
uses a new LABEL variable the scheduler now sets. I also wound up
creating new UP1REL and UP2REL vars to define the 'source' release
for upgrade tests, separate from CURRREL and PREVREL, which are
now never lies - they really are the current stable and previous
stable release, even for update upgrade tests.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-05-07 15:42:08 -07:00
Adam Williamson
3e6764dbb5 Fix French install test on aarch64 by skipping uefi_postinstall
The French install/boot test fails on aarch64 due to a bit of an
ordering issue:

https://openqa.stg.fedoraproject.org/tests/665124

we run `uefi_postinstall`, which does `loadkeys us`, before we
run `_console_login`, which still expects the French layout, so
it breaks. The safest way to solve this I think is to add a new
variable that lets us skip `uefi_postinstall` - I don't want to
change the ordering so we load `uefi_postinstall` after we read
`POSTINSTALL` in case that breaks things somewhere else.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2019-11-08 11:21:37 -08:00
Guy Menanteau
29070a54f1 New install_repository_hd_variation
use a new PREINSTALL to execute a rescue script before install.

This is covering the  Hard_drive_variation test as per:
https://fedoraproject.org/wiki/QA:Testcase_install_repository_Hard_drive_variation

Signed-off-by: Guy Menanteau <menantea@linux.vnet.ibm.com>
2019-04-12 15:49:54 -07:00
Adam Williamson
8a68b04a3b Run the install_default_update test on UEFI as well
Obviously an installer image may work fine for a BIOS install
but fail for a UEFI install, so we should test it both ways.
This requires the invention of a new (terribly named, but I
couldn't think of anything better...) variable to allow us to
use the 'run test on machine A after test run on machine B'
mechanism without just hardcoding '64bit' as the machine name
in the START_AFTER setting (which would break if we ever wanted
to run update tests on any *other* arch).

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2019-01-29 15:49:59 +01:00
Adam Williamson
8d1d150798 Handle running update tests on Koji tasks
We quite often want to run the update tests on a Koji task (not
a Bodhi update) for some reason - usually to test a potential
fix for an issue, or at a maintainer's request to test a change
before it is merged upstream and officially sent out as an
update. Up till now I've always hacked up utils.pm on the
staging server by hand to do this, which is horrible. Together
with a commit to fedora_openqa, this should allow us to do it in
a nice, sane way via the CLI. It's mostly just tweaking the
"updates" repo setup in utils.pm as you'd expect, but there's a
bit of subtlety to it because of the installer tests that use
%ADVISORY% as a variable substitution in the disk image name;
you can't do something like `%ADVISORY or KOJITASK%`, sadly, so
I had to have almost-redundant variables ADVISORY, KOJITASK and
ADVISORY_OR_TASK (we could kinda just live with ADVISORY_OR_TASK
except I didn't want to drop ADVISORY as it's an unnecessary
change from previous behavior).

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2019-01-29 11:54:15 +01:00
Adam Williamson
0915b857f9 More tweaking for this damn no root password spoke situation
Previous approach wouldn't work for tests that run after the
install test...let's just set a password from a chroot after
install completes. Don't really like this as it changes the
'real' install process a bit, but it's the least invasive short
term fix at least. We can maybe do something more sudo-y later
with a bit more thought.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-03-08 20:31:14 -08:00
Adam Williamson
7c28cfc909 Adapt for no user/root panes on Workstation live install
Workstation live installs for F28+ drop the user creation and
root password panes from anaconda, so we need to not try and
use them any more. But we still want the old behaviour for F27.
I'm hoping this approach will work, if not, we'll find out soon
enough. This removes the install_no_user test for F28+ as it
will no longer differ from the install_default test.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2018-03-08 18:32:16 -08:00
Adam Williamson
da01d15406 Fix repo setup for Branched update tests (I hope)
Branched update tests are all failing because the baseurl in
fedora.repo is incorrect for Branched. This is a rather hacky
fix for this problem. It relies on the scheduler setting the
DEVELOPMENT variable when the update is for Branched (I named
the variable DEVELOPMENT rather than BRANCHED to be more
future-proof).

Alternative options I rejected were:

i) stick with MM links
ii) do something 'clever' to retrieve the URLs from MM

Rejected i) because the timing problem where the infra repo gets
updated before MM has the updated repodata checksums is just too
much of a problem; whenever that happens, dnf will refuse to use
the metadata from the infra repo and go pull it from an external
mirror, which can wind up timing out.

Rejected ii) because it seemed too fancy and not really any more
robust than just doing this and adapting it if Things Change In
Future (TM).
2017-03-13 12:43:54 -07:00
Adam Williamson
92d588f245 Add support for testing updates
Summary:
This adds an entirely new workflow for testing distribution
updates. The `ADVISORY` variable is introduced: when set,
`main.pm` will load an early post-install test that sets up
a repository containing the packages from the specified update,
runs `dnf -y update`, and reboots. A new templates file is
added, `templates-updates`, which adds two new flavors called
`updates-server` and `updates-workstation`, each containing
job templates for appropriate post-install tests. Scheduler is
expected to post `ADVISORY=(update ID) HDD_1=(base image)
FLAVOR=updates-(server|workstation)`, where (base image) is one
of the stable release base disk images produced by `createhdds`
and usually used for upgrade testing. This will result in the
appropriate job templates being loaded.

We rejig postinstall test loading and static network config a
bit so that this works for both the 'compose' and 'updates' test
flows: we have to ensure we bring up networking for the tap
tests before we try and install the updates, but still allow
later adjustment of the configuration. We take advantage of the
openQA feature that was added a few months back to run the same
module multiple times, so the `_advisory_update` module can
reboot after installing the updates and the modules that take
care of bootloader, encryption and login get run again. This
looks slightly wacky in the web UI, though - it doesn't show the
later runs of each module.

We also use the recently added feature to specify `+HDD_1` in
the test suites which use a disk image uploaded by an earlier
post-install test, so the test suite value will take priority
over the value POSTed by the scheduler for those tests, and we
will use the uploaded disk image (and not the clean base image
POSTed by the scheduler) for those tests.

My intent here is to enhance the scheduler, adding a consumer
which listens out for critpath updates, and runs this test flow
for each one, then reports the results to ResultsDB where Bodhi
could query and display them. We could also add a list of other
packages to have one or both sets of update tests run on it, I
guess.

Test Plan:
Try a post something like:
HDD_1=disk_f25_server_3_x86_64.img DISTRI=fedora VERSION=25
FLAVOR=updates-server ARCH=x86_64 BUILD=FEDORA-2017-376ae2b92c
ADVISORY=FEDORA-2017-376ae2b92c CURRREL=25 PREVREL=24

Pick an appropriate `ADVISORY` (ideally, one containing some
packages which might actually be involved in the tests), and
matching `FLAVOR` and `HDD_1`. The appropriate tests should run,
a repo with the update packages should be created and enabled
(and dnf update run), and the tests should work properly. Also
test a regular compose run to make sure I didn't break anything.

Reviewers: jskladan, jsedlak

Reviewed By: jsedlak

Subscribers: tflink

Differential Revision: https://phab.qa.fedoraproject.org/D1143
2017-02-22 11:33:32 -08:00
Jan Sedlák
db95bccd52 add anaconda text UI test
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D980
2016-09-07 10:34:54 +02:00
Adam Williamson
315295c4b9 update VARIABLES a bit for newly added ones 2016-09-01 10:46:49 -07:00
Jan Sedlák
0728e09c75 enable ENTRYPOINT to be more than one test, ensure shutdown when on ARM
This adds possiblity to specify more than one test in ENTRYPOINT
variable - test names should be separated with spaces and loading is done
as with POSTINSTALL.

Add _console_shutdown test to ARM image deployment.

Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D973
2016-08-16 09:33:10 +02:00
Adam Williamson
df195a7853 rename BOOT_UPDATES_IMG_URL to TEST_UPDATES, add GRUBADD
Summary:
BOOT_UPDATES_IMG_URL is a pretty misleading name - it used to
be the actual URL, but now it's simply a boolean that decides
whether we look for the effect of the openQA updates image or
not. TEST_UPDATES seems clearer.

GRUBADD does the same thing as GRUB, on top of it. The point of
this is so we can add an option to the scheduler CLI that lets
you say 'run the normal tests, but with this updates image' -
so we can easily (albeit manually triggered) check the impact
of some anaconda change that needs testing. It should never be
set in the templates or the tests, it's there strictly for the
scheduler (whether that's fedora_openqa_schedule or literally a
person calling `client isos post`) to use as a kind of override.
The tests that test updates image loading will probably fail
when doing this, but all other tests should work as intended,
including ones that specify GRUB, becase the extra params will
just get added on top. That's why I invented a new var instead
of just letting the scheduler override GRUB's value when POST
ing.

Test Plan:
Check the rename didn't break anything (updates tests
still work). Run tests with GRUBADD param, make sure value is
correctly appended to cmdline both when GRUB is also specified
and when it is not.

Reviewers: jskladan, garretraziel

Reviewed By: garretraziel

Subscribers: tflink

Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D801
2016-04-08 13:21:29 -07:00
Adam Williamson
4cae3e56a9 document POSTINSTALL variable (recently added)
meant to document this on commit, forgot - it's just a simple
doc explanation, so committing without review.
2016-03-24 14:07:23 -07:00
Adam Williamson
3e435182dd add firewall kickstart tests (disabled and configured)
Summary:
these together test QA:Testcase_kickstart_firewall from the
Server matrix. I'll have to come up with some kinda way to
handle reporting that, might be tricky.

Couple of tweaks to overall test flow: tests can now specify
a POSTINSTALL variable which will load a post-install test
following a naming convention, and tests can specify USER_LOGIN
as 'false' to disable the 'log in as a user' step entirely. We
could easily adjust the kickstarts to create a user so the test
could log in as one, but it seems like an unnecessary step and
I liked the idea of allowing the user login to be skipped.

Test Plan:
Schedule 'universal' tests, check the new tests run
and pass or fail as they should, check no other test is broken
by the logic flow changes.

Reviewers: jskladan, garretraziel

Reviewed By: garretraziel

Subscribers: tflink

Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D792
2016-03-23 13:52:00 -07:00
Adam Williamson
d6470af4cb ISO_URL not ISOURL, now... 2016-02-23 18:04:54 -08:00
Adam Williamson
476e4a328b better explanation of ISOURL and ISO in VARIABLES.md 2016-02-23 11:08:45 -08:00
Adam Williamson
7e12eb4361 we don't actually need RAWHIDE var 2016-02-23 11:08:45 -08:00
Adam Williamson
35735f21cd Pungi 4 conversion: handle Pungi-derived BUILD and FLAVOR
With the arrival of Pungi 4, the scheduler is no longer using
fedfind-provided BUILD and FLAVOR values, but ones derived from
Pungi properties. BUILD is now simply the Pungi compose_id.
FLAVOR is produced by joining the Pungi variant, type, and
format with '-' characters as the separators.

Pungi, unfortunately, does not treat 'Rawhide' as a release, it
synthesizes a release number for Rawhide composes and places
that in the compose ID. To cope with that, for now, the
scheduler will set RAWHIDE to '1' if the compose is a Rawhide
one. As we have to adapt all places where we parse the release
in any case, this commit consolidates them into a fedorabase
subroutine.

For the one place where we also used to parse the 'milestone'
from fedfind, there is a placeholder get_milestone subroutine
which currently returns an empty string, as I don't yet have a
good handle on how to draw the kinds of distinctions fedfind
mapped to 'milestone' from Pungi metadata.
2016-02-23 11:08:45 -08:00
Petr Schindler
079efe72e8 Adds variable PART_TABLE_TYPE to machines
PART_TABLE_TYPE variable says which type of partition table type
should be on attached HDDs.
Some tests with uefi have to use disks with gpt.
Tests are amended to use right disks.

Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D623
2015-10-21 09:36:40 +02:00
Petr Schindler
338b4bf513 Adds uefi support to tests where it makes sense
What changed:
* There is a new needle for uefi bootloader.
* UEFI postinstallation phase
* UEFI tests and machine added to template
2015-09-15 11:04:01 +02:00
Jan Sedlák
5438b452d2 mention main.pm architecture in README
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D495
2015-08-11 13:30:42 +02:00
Adam Williamson
8fde224dc5 add ext3, btrfs and LVM thin tests, tweaks to custom methods
Summary:
This adds three new custom storage tests and some needles to
support them, and tweaks the custom storage methods a bit to
address some things that cropped up in writing the tests. A
new method is added for changing the filesystem, as that's
a distinct operation from changing the device type.

This also restores the previous behaviour of select_disks()
where it handled selecting custom partitioning when needed.
Turns out it's pretty common to use regex'es in perl! Who'd'a
thought.

A corresponding commit to add the tests to openqa_fedora_tools
is coming.

There's no post-install step for the tests yet; I'll try and
write those up and add them soon.

Test Plan:
Do a full run, including the new tests, on Alpha RC2 and check
all are scheduled correctly and run correctly. The LVM thinp
test is expected to fail as it catches a genuine bug.

Reviewers: jskladan, garretraziel

Reviewed By: garretraziel

Subscribers: tflink

Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D490
2015-08-10 11:01:12 -07:00
Jan Sedlák
cd57a721bc add VARIABLES file
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D488
2015-08-10 09:25:04 +02:00