This PR uses the Anaconda Blivet partitioning to recreate a partition
layout while preserving the content of the /home subvolume.
It also adds the postinstall test to check that the home has been
preserved.
This PR adds the `install_btrfs_upload` to install the btrfs based
image, the `btrfs_preserve_home_extras` to prepare and test the data
on the home partition, as well as the `custom_btrfs_preserve_home` that
uses the preinstalled btrfs image and uses its current partitioning to
preserve the home partition and the data on it.
Required because ppc64le has a PReP partition
before boot partition.
PReP partition must not be changed by this script.
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
When Fedora went to BTRFS as a default, we lost the LVM based image to
run LVM resize tests with.
This PR introduces the `install_lvm.pm` installation test that creates
an LVM based qcow2 image to be used by follow-up tests.
The 'universal' tests have quite a few failures if you run them
on an image where btrfs is the default (currently they usually
run on the Server DVD, where xfs-on-LVM is still the default).
This fixes some of them, the others would need code fixes.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The little triangle that's used on drop-down menus and stuff got
bigger. That breaks all these needles.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's this weird thing where the vertical alignment of the
language name in the keyboard layout indicator is sometimes
different. I never can figure out why. It may be to do with
presence or absence of the pre-release indicator.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I call this...The @lruzicka Catcher!
It's a script that checks for needles that aren't actually used
anywhere. It also checks for cases where we have a needle JSON
file but no image, or an image file but no JSON file (and wipes
one case of the latter). It also adds a run of the script to tox
so we get it in CI.
You could make this script a lot more elaborate if you like, by
being fancier about parsing the test code and templates, but I
don't think it's really warranted, I think it just needs to be
'good enough'. It's not the end of the world if it misses the
odd thing or the whitelisting goes stale.
Quite a lot of the removed needles are remnants of different
approaches to app start/stop testing which weren't caught in the
initial PR review. The short-name partitioning ones are odd; they
were introduced in the commit that moved needles into subdirs,
but at least some of them don't actually appear to be moves. They
may have been non-tracked files Josef had lying around that got
into the commit by mistake, or they may just be old needles we
really used at some point but aren't using any more.
reclaim_space_second_partition was introduced as part of the
shrink test (along with reclaim_space_first_partition) but was
never actually used by that test - I guess, again, the test got
re-written during review but we forgot to remove the needle. We
rejigged user creation to use tab presses not a needle match a
while back, which made user_creation_password_input unnecessary.
The various cockpit_updates_* needles are I think remnants of
rewrites of the cockpit update tests that again were missed in
PR review, the tests as merged never used them.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Remove a bunch of needles that have not been used for some time,
plus a few workarounds that are similarly stale.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This test has been failing forever, now the bug is fixed, we need
to update the needles for font changes...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This reverts commit adf3f91818.
The bug has been fixed in anaconda, so we can drop this, which
is good as it has timing issues producing false positives on
Rawhide...
Rawhide seems to have developed a bug where a single disk is no
longer automatically selected as the install target when you
enter the INSTALLATION DESTINATION spoke. We need to work around
this (but register it as a soft failure).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Seems some changes to symbolic icons and widgets have happened
in GTK+ or something, this updates anaconda needles for them.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
IoT is becoming a release-blocking edition for F32, so we should
be testing it for sure. We may add specific tests, but for now
let's run the install and base tests on it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Not sure what changed; it seems like mostly browser needles got
broken, but there's a few installer needles too.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This adds a test for QA:Testcase_Anaconda_User_Interface_VNC -
the VNC install test case. It's implemented as a server/client
pair, with the server booting from the Server DVD image with
`inst.vnc` and the client booting from the desktop base disk
image, setting up networking, then running Boxes to connect to
the server and run the install.
There are various little tweaks to test loading and logic to
handle this, mostly pretty clear. We also move the workaround
for 'spurious auth prompt appears on desktop after you switch
away to a VT and back' out of the desktop update test and into
the `desktop_vt` helper function, since now this test can hit
it as well. We enhance _graphical_wait_login to handle the boot
loader if needed (it has never needed to until now).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Once again, the text is at a slightly different height to the
needles we already have. I do not know why this sometimes
happens. It's a mystery.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This reduces the coverage of the identification test a bit but
also *substantially* simplifies it. We run into a ton of problems
when we try to check the version and prerelease text on screens
where it appears on banners:
* The banners differ between variants
* The pre-release text is translated
* The banners have gradients so for RTL languages, even if some
text is untranslated (e.g. 'Fedora 31') it appears on a
different background color than on LTR languages
* The prerelease text is dark red; if it appears on a dark blue
area of the banner this can trigger an os-autoinst needle
comparison bug: https://progress.opensuse.org/issues/56822
All of this together means we wind up continually fighting these
checks and we have a whole forest of needles just for them, and
it doesn't seem worthwhile. So let's drop all the places where
we were checking version and prerelease on banners, and only
check them in two places where they appear on a grey background,
which avoids most of the problems (we just need one version
needle per release, and one prerelease needle per language).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Now one of the strings we check for is translated, but the other
is not...handle this, again with a workaround needle so the
missing translation triggers a soft fail.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
For RTL languages the keyboard icon and language indicator are
the other way around, so we have different needles even for the
US layout indicator which is otherwise the same in all langs.
This is a variant needle for the new keyboard icon that showed
up in Rawhide recently.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This checkbox sometimes renders slightly differently, especially
on non-x86_64. We're not really sure why, but we just add more
needles to handle it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We need another needle for French installs, and we need to use
ISO_URL for checking the ISO file name if ISO isn't set.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
These showed up because I did a manual universal flavor run on
an ISO today, but we'll need them as soon as we do a candidate
compose too.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
These only get used when we run universal tests on a non-Server
image, which is pretty rare (these days, as Server DVD is a
critical image and composes fail if it fails, it only really
happens when we do it manually for some reason, like I did
today). So they get stale and aren't updated for font rendering
changes and stuff. As I said I had to do a run like that today,
so I had to update all these needles...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The top bar differs in non-English languages - for RTL the
version ident is on the left (so background is different), and
the width of the area with no text differs depending on the
length of the translations.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Seems like there's been a change to freetype or something, text
rendering changed in all of these. Note there's one workaround
needle for an untranslated message in Japanese.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Split this out of install_default, because it really is not a
part of that test and we do not want that test to fail because
the desktop background is wrong. Make it its own test module
and test suite instead. Don't do it on Rawhide, because we
really can't assert anything worthwhile about Rawhide at the
moment at least (this means the test runs but is a no-op and
will always pass on Rawhide, unfortunately). Move the needles
to a more appropriate location (this has nothing to do with
anaconda) and use 'background' not 'wallpaper' naming (that's
the name we use elsewhere in the project, e.g. package names).
Also, run the test on updates, and add an F29 needle for this
purpose.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The backgrounds we have are F30 backgrounds, not F31: there are
no F31 backgrounds yet, F31 images are using F30 backgrounds
(which is a bug we should file). Also we really only need one
F30 background needle to match both KDE and GNOME if we pick a
sensible area of the screen to use, and let's use one that has
a bit more contrast for safer matching.
Note: F30 background is *meant* to be animated, but in fact
neither GNOME nor KDE seems to use the animated version by
default. Which makes our lives easier! Sucks for whoever put in
the work to animate it, though.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The Adwaita icon theme got some changes in a git snapshot build
for Rawhide recently. These changed icons break various needles,
we need new ones.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
New GTK+ changed something so the background of many interface
elements is a slightly lighter grey, this broke a bunch of
needles. Here are the retakes. Includes one not-strictly-related
SDDM update and a rename of the one @lruzicka did to match the
others.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This adds a test which builds a netinst image potentially with
the package(s) from the update, and uploads that image. It also
adds a test which runs a default install using that image. This
is intended to check whether the update breaks the creation or
use of install images; particularly this will let us test
anaconda etc. updates. We also update the minimal disk image
name, as we have to make it bigger to accommodate this test,
and making it bigger changes its name - the actual change to
the disk image itself is in createhdds. We also have to redo a
bunch of installer needles for F28 fonts, after I removed them
a month or so back...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It's my second least favorite day of the year again: Stale
Needle Cleanup Day!
This should get rid of all anaconda needles that definitely are
not being used any more. A few borderline cases (where I'm not
100% sure if they may still be useful in odd corner cases, like
running universal tests on non-server images, and runs outside
of the US, and stuff) are kept around.
Cleanup of all non-anaconda needles will be in the next commit.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's really no point having separate error and error_report
needles. Just match on error_report as well as clicking on it.
Also add a new error_report needle for latest Rawhide fonts.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
So that we get the crash info uploaded. Note these are not
language-tagged as we *don't* want to 'test' translation of
these, we want the best possible chance of matching any error
dialog in any language...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
anaconda's new hub layout makes all the icons smaller, so all
these needles needed re-doing, even though the same icons are
present...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Seems sometimes tests are showing up with the date/time spoke
in a non-active highlighted state or something, don't really
know why, but it's not broken and we should just accept it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Sometimes on aarch64 clicking the partition scheme drop-down
just doesn't seem to make the menu appear, instead the button
goes active but that's all. It's very unlikely we'll be able
to track down why as this doesn't happen in manual testing on
aarch64 (according to @pwhalen), so instead let's just work
around it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We've been seeing an odd case lately where the language select
screen is not foregrounded when it appears (so all text is
grey). It happens very occasionally on x86_64, but a lot on
ppc64. To work around this, let's add a needle that matches the
inactive screen, and click on the screen when it appears just
to make sure it's active.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In the most recent Rawhide compose, anaconda has changed how it
names volume groups (again), and now the VGs in openQA installs
have rather longer names. This winds up causing a problem for
this needle: the column where the 'Device Type' dropdown is
placed actually gets narrower (because the column to the right,
which has the volume group name in it, is wider), and so the
dropdown box is narrower, and the arrow protrudes into the area
which the needle expects not to have an arrow in it. So, let's
make the match area slightly narrower.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Rawhide has a bit of a problem where its 'description' of an
iSCSI disk is so long that the other columns that should appear
in the CONFIGURE MOUNT POINT dialog don't. This means our
device_sda_selected needle doesn't match, because the column
where 'sda' should appear isn't visible.
So add a soft-fail needle to cover this case; we know what the
description for the disk that's 'sda' in this case looks like,
so match on that.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Time for an annual spring clean. Based on the admin UI's list
of needles that haven't been matched for a long time, but with
some manual tweaking (some are actually still needed).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is required because anaconda is still checking for it
even if not mandatory. Already tracked by bug
https://bugzilla.redhat.com/show_bug.cgi?id=1172791
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
related to known bug
https://bugzilla.gnome.org/show_bug.cgi?id=771127
like other needles with same bgo#771127 reference
do not set it as Workaround needle.
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
That other one didn't help, so let's try this - try and spot if
the spoke is in the unexpected state (the needle should only
match if the spoke is done processing and still in warning
state, it shouldn't match while the needle is still thinking)
and click through it again if so.
https://openqa.fedoraproject.org/tests/117131 shows a spurious
match of the anaconda warning_bar needle - it's matching in an
ad for LibreOffice. Add a bit of the grey above the bar, so
hopefully this won't happen any more.
When running universal tests with a non-Server image, which is
not common but *does* happen (e.g. manually built test image),
the pre-selected filesystem in blivet-gui will be ext4 not xfs
(just as with custom partitioning). So we need xfs and ext4
variants of this needle. Renamed the XFS one for consistency.
Summary:
This adds a new test suite, run for Workstation and KDE live
images, which does not create a user during install. It then
expects initial-setup (KDE) or gnome-initial-setup (Workstation)
to appear after install, creates a user, and proceeds with
normal boot.
Note the ARM image test already covers the initial-setup text
mode, and the ARM minimal image is the only case where that
actually matters (it's not included in Server).
Test Plan:
Run the new tests, check they work. Run all old
tests, check the changes didn't break them.
Reviewers: jsedlak, jskladan
Reviewed By: jsedlak
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1185
Summary:
Since 26.17, anaconda shows a warning when the user password
contains non-ASCII characters, and requires a second Done click
to confirm. This change should handle that.
On the 'catch cases where password typing went wrong and re-try'
bit: to keep that, but not re-type the password *every single
time* on the Russian install test, we'd have to make the needle
match the text of the warning. This is problematic because then
that needle will be able to break without us easily noticing;
that's why I wanted to keep the 'warning bar' needle text-free.
Unfortunately, that means we have to skip the protection for
switched-layout installs.
Note the protection was actually not working for any non-English
install anyhow, because the needle had `LANGUAGE-english` as a
tag. We never noticed that. Failed password typing is pretty
rare now, so we can live without the protection - it's just nice
to have it for the English install tests because there's so many
of them.
Test Plan:
Run the Russian install with a recent Rawhide image,
check it clicks 'Done' twice. Note, it will still fail, because
of RHBZ #1413813.
Reviewers: jskladan, garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Reviewed By: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1084
Summary:
Include some basic testing of Japanese input, and split the
input testing (including Russian) into a separate module, since
it's not really part of 'login' testing.
Test Plan:
Run the test, and the Russian and French tests too to
make sure they didn't break. Tested on staging. Note the Japanese
test soft fails, intentionally, at present, as I discovered a bug
while working on it:
https://bugzilla.gnome.org/show_bug.cgi?id=776189
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1072
Summary:
This isn't in the criteria, but it's commonly used, so we ought
to test this way. Require authentication for the iSCSI target
and have the test provide the appropriate auth info.
Test Plan:
Run the iscsi test and check it works (you need the
recent fixes for support_server to make *that* work). Nothing
else should be affected.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1070
Summary:
The non-English tests so far did not test that graphical login
worked as expected, which is a fairly large hole. With this
change, they should do a Workstation install and test login to
both GNOME and the console works as expected. KDE is not yet
tested.
As part of this we tweak the implementation of keyboard layout
switching in graphical environments to use a generic function
in main_common which can handle both anaconda and desktops
(just GNOME at present, but should extend easily to any desktop
with a known switcher key and a visible layout indicator),
replacing the anacondatest class method. I kinda don't like that
the test has to specifically tell the function when it's in
anaconda, but I don't think I want to start experimenting with
a global 'test phase' openQA variable or anything like that at
present.
Fixes T842.
Test Plan:
Run the French and Russian install tests and check
they work as expected. Also run an English Workstation install
if you like, and make sure that didn't break. This change is
live on staging ATM, seems to work fine.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Maniphest Tasks: T842
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1071
OK, we once again hit an annoying case where the button match
that doesn't include text got matched in the sidebar:
https://openqa.fedoraproject.org/tests/39576#step/_do_install_and_reboot/13
so I think it's time to give up on that approach and just go
ahead and deal with the button text varying between live and
traditional installs. So let's change the existing needles to
include the button text and add one new needle to cover the
English live F25/F26 case. I don't think we need a 'quit'
needle for F24 (as the only thing we test for F24 is the Atomic
installer image, which says 'Reboot') or for French or Russian
(as we only test a traditional installer image for those, not
a live image).
seems to affect the network spoke a lot but not anywhere else.
Odd. Anyhow, here we go. Keeping the old needles for now as
F25 still has the old rendering.
Summary:
I've been wanting to do this for a while, but
https://github.com/os-autoinst/openQA/issues/786 is making it
difficult. Still, I think the quantity of needles is slowing
down openQA, so I'm doing it the old-fashioned way - looking
through test results and seeing what needles are actually used
now.
Test Plan:
Run full test suite for 24 Atomic, 25 and Rawhide and
make sure all tests still work. This is currently deployed on
staging (along with key-fixes) and I'm testing it there.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D994
Summary:
the main thing this does is try and type slower in X - this
should cover nearly everywhere we type anything in X, and make
it type slower. We also add a bit more safety checking to some
old tests which didn't have it (mainly _do_install_and_reboot)
- wait_still_screen after typing to make sure all the keypresses
were registered before continuing.
This is an attempt to mitigate the problems we've seen where
the wrong text gets typed into the wrong places and the tests
break.
This branch is live on staging atm. It still has *some* issues,
but I do think it's an improvement.
Test Plan:
run the tests (probably several times), compare to
runs without the change, see if it's better or worse...
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D993
so what seems to be going on on the software selection screen
is some kind of GTK+ bug:
https://bugzilla.gnome.org/show_bug.cgi?id=771127
the radio button bullets don't always render correctly - I think
they're not always completing a transition they go through on
selection. I think they can get stuck in any state between 'grey
and small' and 'black and big', but for now these are the needles
I've managed to create from failures; we're missing a 'greyer
KDE' variant, but if that happens, we can add it. If the bug
gets fixed we should be able to drop all these.
these rarely get used any more. they're only used when we're
running the filesystem tests on a non-Server image, where the
default fs is ext4 not xfs. With the old nightly process, where
we only got a generic boot.iso, we used them all the time, but
now we get product-ized nightlies, we rarely do. But I did hit
them today running the universal tests with a generic boot.iso
I hand-built to test an anaconda update, so in case we need to
do that kind of thing again in future, we may as well update
the needles.
Summary:
we have a long-standing problem with all the tests that hit
the repositories. The tests are triggered as soon as a compose
completes. At this point in time, the compose is not synced to
the mirrors, where the default 'fedora' repo definition looks;
the sync happens after the compose completes, and there is also
a metadata sync step that must happen after *that* before any
operation that uses the 'fedora' repository definition will
actually use the packages from the new compose. Thus all net
install tests and tests that installed packages have been
effectively testing the previous compose, not the current one.
We have some thoughts about how to fix this 'properly' (such
that the openQA tests wouldn't have to do anything special,
but their 'fedora' repository would somehow reflect the compose
under test), but none of them is in place right now or likely
to happen in the short term, so in the mean time this should
deal with most of the issues. With this change, everything but
the default_install tests for the netinst images should use
the compose-under-test's Everything tree instead of the 'fedora'
repository, and thus should install and test the correct
packages.
This relies on a corresponding change to openqa_fedora_tools
to set the LOCATION openQA setting (which is simply the base
location of the compose under test).
Test Plan:
Do a full test run, check (as far as you can) tests run sensibly
and use appropriate repositories.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D989
Summary:
the dictionary error bug was fixed some time back, so drop this
workaround for it.
Test Plan:
Run all tests for F25 and Rawhide and verify they don't need
this workaround any longer.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D988
this needle can actually also match the 'Delete all' button,
resulting in the test not doing what it should. openQA should
prefer the match closer to the area's location in the needle,
but https://openqa.fedoraproject.org/tests/31136 seems to show
this not happening, so let's make the match area wider in all
versions of the needle so it should no longer match the Delete
all button.
font rendering has changed somehow in both Rawhide and F25
updates-testing, retake a bunch of needles for this. Some more
may be needed later in tests that are currently failed or
skipped for other reasons.
now we're getting composes with the product name 'Fedora-Atomic'
this needle doesn't match them. Tweak it so it should match both
'Fedora' and 'Fedora-Atomic'.
Summary:
Set up the support server to provide DHCP/DNS functionality and
an NFS server, providing a kickstart. Add a kickstart test just
like the other root-user-crypted-net kickstart tests except it
gets the kickstart from the support server via NFS. Also add NFS
repository tests and a second support server for Server-dvd-iso
flavor: this test must run on that flavor to ensure that packages
are actually available. The support server just mounts the
attached 'DVD' and exports it via NFS.
Note we don't need to do anything clever to avoid IP conflicts
between the two support servers, because os-autoinst-openvswitch
ensures each worker group is on its own VLAN.
As part of adding the NFS repo tests, I did a bit of cleanup,
moving little things we were repeating a lot into anacondatest,
and sharing the 'check if the repo was used' logic between all
the tests (by making it into a test step that's loaded for all
of them). I also simplified the 'was repo used' checks a bit,
it seems silly to run a 'grep' command inside the VM then have
os-autoinst do a grep on the output (which is effectively what
we were doing before), instead we'll just use a single grep
within the VM, and clean up the messy quoting/escaping a bit.
Test Plan:
Run all tests - at least all repository tests - and
check they work (make sure the tests are actually still sane,
not just that they pass). I've done runs of all the repo tests
and they look good to me, but please double-check. I'm currently
re-running the whole 24-20160609.n.0 test on staging with these
changes.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D888
Summary:
this is following a SUSE model for tests where we need a server
end but don't want setting up the server to constitute a real
test in itself, we want it to be stable. The 'support_server'
test just boots a pre-built (by createhdds) disk image, sets up
networking, and runs the iSCSI server.
To run the iSCSI test we need to handle networking config in
anaconda (or we would need to set the support server up as a
DHCP server, which may be worth considering), so this adds that.
We also need to be able to specify the target device for a
volume in custom partitioning, so this adds that too.
Test Plan:
Build the necessary support server disk image (use
D883), then run the test and make sure it works. Also make sure
all other tests continue to work.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D884
Summary:
the Server DVD now just has 'Fedora Server' and 'Custom
Operating System' environments. Custom is basically minimal.
So we can use the DVD for 'universal' testing again, these
needles match the anaconda_minimal tags.
Test Plan:
Run the 'universal' tests on a DVD ISO with these
needles added, test that they work OK and use the 'Custom' env.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D844
Summary:
Requires new needles and test suite and job template, plus a
few tweaks to handle 'switched' keyboard layouts (so we use the
switched layout in the username and password).
Test Plan:
Run the test and see that it...fails. But that's OK!
It's a genuine bug: RHBZ #1333998 . At least make sure it gets
to that point and no other tests have broken and all the needles
look sane.
Reviewers: garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D846
