This adds a test for fingerprint-based login, as requested by
@benzea in #223. We use the fprintd dummy device to let us
simulate scanning a fingerprint, and check various scenarios
recommended by @benzea.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The open dialog on Silverblue (which is apparently not at all
the same thing as the open dialog on Workstation, though they
look the same) does not default to the Documents folder, so we
have to open it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
`rpm` doesn't work. I dunno off-hand how you'd install git on
ostree if it wasn't there, so let's just assume it will be.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR fixes issue #188. It adds a test suite to test basic
functionality of Evince and brings the following features:
* test scripts for various Evince functions.
* needles to support the Evince test scripts
* new template variables `TESTPATH` and `POSTINSTALL_LOAD_ALL` (see
below)
* new logic in `main.py` (see below)
The new variables and the new logic make it easier to create test
suites for post-installation tests. If TESTPATH is used, OpenQA
will take all tests mentioned in POSTINSTALL from that specified
TESTPATH. If both TESTPATH and POSTINSTALL_LOAD_ALL are used, then
OpenQA will run all tests it can find at the TESTPATH location.
If POSTINSTALL and POSTINSTALL_LOAD_ALL are set simultaneously,
then only POSTINSTALL will be taken into account and OpenQA will
only load tests mentioned there.
The power_off function in desktop_login was not really asserting/checking
whether the VM got turned off. However, os-autoinst supports checking whether
the VM is turned off via assert_shutdown. This is additionally much more useful
than using check_shutdown, which does nothing if the VM is still running.
Wait for a change when clicking the done button in root password
screen (anaconda can pause for a long time there).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I've seen some failures caused by a sort of race where both
'apply' and 'refresh' needles match at the first assertion, but
openQA "prefers" the 'refresh' match. So we click the 'refresh'
button and *immediately* check_screen for apply, which is still
visible...but by the time we go to click it, it's gone because
the refresh found something new and now it's showing "Download".
This tweak should help, because if we can 'see' both refresh and
apply at the start, we'll just go ahead and click apply, we
won't refresh. The logic becomes a little more obscure, but I'm
not sure I see a fix for that. At least until KDE's tool finally
settles down for two releases in a row and we might be able to
simplify this whole thing.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It can take some time for first login of a user (especially in
KDE). Test has been failing lately on Rawhide because of this.
It seems until recently we never got a still screen when trying
to log in as Jim - so the effective wait for login to complete
was 60 seconds, 30 seconds for wait_still_screen to time out
then 30 seconds for the actual login needle assertion - but now
we are getting a blank screen for 5 seconds which satisfies
wait_still_screen almost immediately, so effective timeout for
the login process is only 35 seconds, which isn't long enough.
So let's bump the check_desktop timeout to 60 seconds.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
KDE has made it so you need to double-click icons on the desktop
now. Unfortunately this means a clunky conditional at least until
the update goes stable. When F33 is EOL we can reduce it to
just "if kde".
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In #235 we accidentally included an entire disks.pm test that
wasn't meant to be there - the infocenter module test is the
right thing to exercise plasma-disks, there is no standalone
app, running 'disks' just gets you the KDE Partition Manager,
which we already test. So this removes that test and renames a
needle that looks like it's for that test but is actually for
the kinfocenter module, to make this clearer.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It has been noted that updates have broken podman in the past and
this is a major issue for some users. Let's create a new update
flavor and run the test in it. We'll use the server image as a
base, but it's not really a server test, so I'm giving it its own
flavor so it's not run on updates that we only want to run server
tests on, and we can schedule just this test to run on container-y
updates.
As part of this, we need to install podman before running the
test; for flavors we currently run it on we expect podman to be
preinstalled, but that's not true for the server base image.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR adds a new test that automates the above mentioned test case.
It starts the installation in text mode using the `install_text` test
case, which it interrupts using the Anaconda crash trigger.
When the crash happens, it goes through the process of reporting
the bug to Bugzilla, checks that Bugzilla sends a positive
confirmation of the action, but also performs some REST API
calls to do a proper check and then it closes the bug to clean up.
GNOME dropped the g-i-s new user mode in F34, so on a Japanese
install with user created in the installer, you don't get an
input source configured out of the box or on first boot. So
we'll just have to do it manually after booting, before we test
if it works.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Looks like the latest Rawhide got a permanent update notification
for KDE again. F34 is still around, though, so we can't just
revert to the old code, I don't think.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The 'desktop_pacakge_tool_update-kde-detected' needles and
'desktop_update_notification_systray-kde' needles are actually
matching on exactly the same thing, so drop the redundancy. We
need to have the desktop_package_tool_update tag on the older
(F33) version of this needle because on F33 we click on it to
launch the update tool in the desktop_update_graphical test; from
F34 onwards this is *not* what we want to do so the needle should
not have that tag to avoid throwing the test off. When F33 goes
EOL we can drop that tag from the needle and simplify the
destop_update_graphical test. Also add a needle for the Discover
app's 'update' icon when no updates are found.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's some cheating/sloppiness going on here, with the same tag
and sometimes same needle being used to match "LVM2 Volume Group"
and "LVM2 Logical Volume". Today this caused us to pick the thin
pool entry instead in a test, so let's just clean this up and do
it right, with separate needles for matching each thing.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
A recent cups-pdf build changed the default filename for files
output by cups-pdf. We need to have the test look for the
correct filename based on the cups-pdf version.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The needle match seems to have changed when bug #1957858 showed
up, but it's actually just a text rendering change in the window
title, it's not exactly caused by the tiny window. So not marking
as a workaround needle.
Maximizing the window makes the test work faster when we hit that
bug, as type_safely needs to be able to see the results of its
typing.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Seems silly to wait 120 seconds when we know what the criteria
are. GNOME installs, can't do this; others, we have to.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Some fixups for anaconda_help. Two runs of it failed today around
handoff from the root password screen to the install progress
screen; add a couple of wait_still_screens there to make it
safer. Drop the added nonlive needles, because they're too
permissive, causing problems for other tests (they're matching
before they should); instead we solve the problem of spokes being
highlighted by just pressing shift-tab a few times. And fix some
tabs to be spaces.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Had some repeated failures where there's kind of a race between
Software doing some kind of auto-refresh and the test clicking
on stuff. This seems to help.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR automates the mentioned testcase to test that Help can be
displayed in Anaconda during the installation. It navigates through
the available Help screens and if it can see it, it finishes.
This test runs after `install_default_upload` to override the
installation defaults defined for all primary tests.
Delete a duplicated needle.
Reformat list extensions to make it nicer.
Get rid of wrong export and an empty line.
Delete empty line.
Use _boot_to_anaconda for booting and move subroutine accordingly.
Add variable to templates.fif.json
Delete trailing whitespace.
Fix calling the pretest.
Move help checking to another place.
Since 232, there's been a bug where we need to hit tab three
times to get into the first field in the "Join domain" dialog.
In 245, it's down to two times, for some reason. So, handle
that.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Since f33b50e, anaconda doesn't log "enabled repo:" any more. To
ensure the repo actually is enabled we need to check some other
lines. Good news is, we don't need the 'anaconda'|'' dodge any
more, so we can drop that.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Boxes dropped VNC functionality. It's supposed to be replaced by
Connections, but we can't use that until it has fullscreen:
https://gitlab.gnome.org/GNOME/connections/-/issues/5
so use Vinagre for now. We do also prepare some needles for
Connections in anticipation of being able to use it later (since
I already did the work and don't want to waste it...)
Signed-off-by: Adam Williamson <awilliam@redhat.com>
alt-f4 makes sense for an app (Terminal on GNOME) but not really
for closing the system menu (KDE). It seems like it worked till
a day or two back then broke, but I think just using Esc instead
rather than filing a bug is the best plan, I'm not sure I'd
*expect* alt-f4 to work for this.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
anaconda changed how this log line looks (again); update the
check to handle old and new styles for now.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It doesn't seem to return to the top level automatically any more,
though the message goes away after a short time, still.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The Modularity tests rely on an external script to test the modular
behaviour of DNF. There is a potentional risk that the connection
is be down and the script cannot be downloaded.
This enhancement uses a regular OpenQA perl test case script to only
invoke DNF commands and parse their output to test the same behaviour
that we have been testing already.
This enhancement picks a random module for each of the operations,
and thus tries to mimick reality a little bit more.
This adds a test that just fails if any one of a given list of
unwanted packages is installed. This was a request for the
Workstation edition from @catanzaro so I've just implemented it
for Workstation so far, but it's designed to be easily extended
to cover other subvariants too if we want.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is the same thing we did for install_resize_lvm, to address
issue #201. We just didn't get around to doing it for the blivet
test yet. We also change the HDDSIZEGB for the parent test to
15GB so the resizing stuff actually works in both resize tests;
ever since we changed this the install_resize_lvm test has not
been working properly, it hasn't actually been doing any resize.
Also drop the swap partition stuff from that test as it's for
sure no longer needed.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
On current F34 we get no permanent update notification in the
notifications view, we only get a *transient* one plus the
systray icon. This tweaks things so on F34 we check both of
those things correctly, behaviour on <F34 should be unchanged.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Man, this thing can get into a lot of states. Apparently somehow
it can go straight from refresh to reboot?
Signed-off-by: Adam Williamson <awilliam@redhat.com>
KDE update was still often failing on #1943943, so this tries a
bit harder to work around it. We add a 'refresh' needle for KDE,
and tweak the 'retry' logic to click it if we get to that point.
Note adding the needle also changes behaviour slightly - we may
click this needle if we see it on first entering the screen. So
either change may be helping. Either way, this does make the test
more reliable.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Sometimes we click the button, it cycles briefly, and...just
comes back. To avoid unpredictable failures on update tests that
have nothing to do with the update, let's try and handle this by
just clicking it till it works.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In GDM 40 the message is displayed only briefly, like in SDDM,
so we can't assert it. Only do it for <F34.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
OK, extending the timeout didn't work. Try this instead. The
problem is when GNOME takes a long time to log out we wrongly
decide we're in the "DM is showing a 'screensaver' state" case
and hit 'ret' to clear it. In GDM that selects the highlighted
user. Maybe if we use 'esc', it'll still work in SDDM to clear
the screensaver state, but not select the first user in the list
in GDM...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is a bandaid for GNOME taking a long time to log out right
now. I would prefer to make login_user more robust, but that's a
bit more complicated as it's used for both unlock and login.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Main UI appears over the tip of the day now, so we can ignore it
and just check the UI ran then close it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
For consistency, let's just return to the desktop right away. We
also need to handle closing the overview before running installer
on live image boot.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In F34+, print-to-PDF in KDE is printing to /home/test , not
/home/test/Desktop. Not sure why. But let's deal with it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We need to hit 'restart' after applying updates, and we also
need the 'done' needle *not* to match the restart message, so
change that to match on the text (unfortunately). That also
means we have to add another variant of the needle for F32 as
the background of the text is a different color there.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This gives apply and download longer to show up (which is an
issue for KDE right now) while also not waiting 10 seconds if
they don't.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR adds a test that uses the Blivet interface to create an LVM
layout with ext4 filesystem as well as a postinstall test that checks
that the LVM layout has been created correctly.
This PR introduces a test case that uses the Blivet partitioning
tool to create a standard partitioning layout with / and /boot
(and specific partitions for UEFI and ARM64) using ext4 as
the selected filesystem.
It also adds a postinstallation test to check that the partitions
have been created correctly.
We finally saw a test where there were *no* errors logged by the
time Cockpit reached the log screen, so there were no entries to
click. Let's just make the test set log level to info before
looking for entries - I prefer this to 'click entry if found,
otherwise change log level' as that's twice as many branches to
look after. Of course, it means the warning triangle entry needle
is useless now :(
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Behaviour changed a bit in Cockpit 238, we may now just hit
success during this loop, so handle that. Also use 'break' for
the other two cases, not a big run counter bump.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We get Welcome Tour now, not gnome-initial-setup new user mode,
and it doesn't respect the dotfile g-i-s respected.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In GNOME 40, the new-user mode of g-i-s is gone and we get the
welcome tour where we would previously have seen that. This
should handle that, I hope. I probably messed up somewhere.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
KDE in F34+ is now placing sleep, restart and shutdown buttons
right on the system menu, not in a submenu. So we need to sort of
tweak this logic. The approach here is: we count the GNOME
submenu as both a "power" and "leave" menu, so the needle to
enter it has both tags. KDE still has a "leave" submenu, but the
power options are not in a submenu any more, so the new "leave"
needle only has the leave tag, not the power tag. For "leave"
actions we just unconditionally expect the "leave" tag; for
power actions we first match on *either* the submenu tag (for
GNOME and earlier KDE) *or* the action tag, click whatever we
found, and then if we matched the submenu (not the action), we
assert and click the action. After that all paths should be in
sync again and we can continue.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is how our Pungi config has been set up since F32, so we
should match it here to be accurate.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR uses the Anaconda Blivet partitioning to recreate a partition
layout while preserving the content of the /home subvolume.
It also adds the postinstall test to check that the home has been
preserved.
This PR adds the `install_btrfs_upload` to install the btrfs based
image, the `btrfs_preserve_home_extras` to prepare and test the data
on the home partition, as well as the `custom_btrfs_preserve_home` that
uses the preinstalled btrfs image and uses its current partitioning to
preserve the home partition and the data on it.
Required because ppc64le has a PReP partition
before boot partition.
PReP partition must not be changed by this script.
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
OK, looked into it some more and ultimately we had problems here
because of https://bugzilla.redhat.com/show_bug.cgi?id=1908791
in fact. The password prompt was taking far longer than usual to
appear because pam_fprintd was failing because of that bug. That
should be fixed with next Firefox build, so I think it's best to
just leave this as it was, because in the usual course of events
it works fine and it saves having another needle to maintain.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
...nope, wait_screen_change wasn't enough. Let's just assert the
needle. Not sure if the existing one will work, if not we'll add
one.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Sigh I hate this test. We seem to be typing root pw before the
terminal is ready for us:
https://openqa.fedoraproject.org/tests/745007#step/desktop_terminal/3
Let's try this. Hopefully it'll wait for the Password: prompt
before typing, without us having to actually add a needle...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Using .local is apparently Bad Form because it's reserved for
mDNS. However there doesn't appear to be any particularly Good
Form for what to call a test domain you never want to exist
outside of a closed system, apparently. Sigh. Let's try this.
Includes a bump to disk_ks version because the kickstarts on
that image also need to have this change applied.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is another known "fails due to no hardware" case:
https://bugzilla.redhat.com/show_bug.cgi?id=1894654
those are explicitly excluded from the release criterion, so a
soft failure is appropriate.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We don't *need* to log out from the desktop and reboot from the
DM here, that's not part of the test (we test those features
later using jim and jack). Now we don't black out the background
of test's session in KDE, the logout needle doesn't match, so
instead of redoing that needle all the time or re-adding the
solidify_wallpaper call just to make one needle match reliable,
let's just reboot from the console.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
solidify_wallpaper only does the current session, and does it in
a kind of painful way on each desktop. For apps_startstop this
is kinda okay, but for desktop_login it's slow and error-prone
to do this three times, every time. Let's replace it with a hack
that just replaces the actual wallpaper files with a solid black
PNG file. This only takes effect after a logout, but it should
affect all logins on all desktops once it's done. So long as
the base backgrounds package doesn't change layout too much.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This makes it so the `wait_still_screen` that comes at the end
of `type_very_safely` happens *after we hit enter*, not after
we type the password but before we hit enter. I'm hoping this
makes the 'set new password at login' more robust on aarch64, it
seems to be failing often.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This allows us to use assert_script_run, and be more reliable.
Same approach used in _do_install_and_reboot postinstall stuff.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Another aarch64 robustness fix...sometimes hitting enter at GDM
just doesn't seem to work, let's give it three tries if needed.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This matches the wait in boot_to_login_screen. The needle can
match before the UI is really done loading, and if we don't wait
long enough we wind up hitting enter before GDM is really ready
for us. This seems to be affecting the test on aarch64 quite
badly.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Typing into a desktop terminal is a lot less reliable than typing
into a VT. We're seeing failures here quite often on aarch64, so
let's try doing this stuff in a VT instead.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I tried to bump it before, but set it to 90, which is the default.
Sigh. So this is an actual bump. It looks like until 20201124 this
took about 80 seconds, now it's taking like 93.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The review for `btrfs_preserve_home` test case has revealed,
that the way how to reach the mountpoint textfield in the Anaconda
partitioning differs between various tests. This PR makes it the
easiest way possible, as is defined by `custom_with_swap` test
case mentioned in the review.
It seems the message got moved to anaconda.log in Rawhide. I
think it should be fine to just check both.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR add the installation test which uses Standard partitioning
with an ext4 filesystem to cover one of the new requirements as
described in issue #202.
Fixed after a review
It still seems to be broken in 233 and 233.1; I limited the
workaround to 232 at first as Cockpit are usually good at fixing
things very fast, but as this one has sat for a while, let's
leave it worked-around until we know it's fixed.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
When Fedora went to BTRFS as a default, we lost the LVM based image to
run LVM resize tests with.
This PR introduces the `install_lvm.pm` installation test that creates
an LVM based qcow2 image to be used by follow-up tests.
I noticed a pattern lately of VNC tests failing on Rawhide when
we have a debug kernel (but passing with a regular kernel). On
closer investigation I think there's simply a screen blank
happening if the install process takes more than five minutes,
and that's more likely with a debug kernel. This extends the
loop we use to move the mouse every so often while waiting for
the install to complete (which is meant to defeat this sort of
thing) to also click the mouse, when we're a VNC client test. In
a quick check this seemed to help.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Update a needle with slightly different text rendering, and add
a workaround to hit tab three times rather than once on entering
the "Join a domain" screen, see
https://github.com/cockpit-project/cockpit/issues/14895 .
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The weird bug turned out to be caused by an internal DNS zone
in the new infra not being signed:
https://pagure.io/fedora-infrastructure/issue/9411
This is now resolved, so we can drop the workaround.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Revert "Regenerate grub.cfg for ppc64le Silverblue to boot (step 2)"
This reverts commit d384cfed30.
Revert "Regenerate grub.cfg for ppc64le Silverblue to boot, brc#1817004"
This reverts commit 8d7be9a227.
Not required anymore for f33 (only for f32)
And bad side effect for f33 (failure not analysed)
eg: https://openqa.stg.fedoraproject.org/tests/949783#step/_do_install_and_reboot/32
Keep correction to avoid warning in autoinst-log when ABRT var not defined.
Signed-off-by: Guy Menanteau <menantea@linux.vnet.ibm.com>
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
We've had this 'exception' for mcelog.service failing in here for
years. Looking into it, it seems to now be fixed:
https://bugzilla.redhat.com/show_bug.cgi?id=1526725
and hasn't happened in our official instances for years (I guess
because they're all Intel boxes). However, we have a similar case
on ppc64le with hcn-init.service failing spuriously:
https://bugzilla.redhat.com/show_bug.cgi?id=1894654
so I'm just converting it into a workaround for that instead. We
could wire this up to be more sophisticated, with some kind of
array or hash of services that are allowed to fail and more
complex checking code, but let's not bother unless/until it's
necessary.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
So, there's a problem with how we figure out the NetworkManager
connection to use in setup_tap_static: it expects the first
connection in the list to be the right one, but this is only
actually true so long as it's *active*. When we're in the tap
case, it's usually not going to actually *work* out of the box
on boot (or else we wouldn't need setup_tap_static at all...),
so some time after boot, NetworkManager gives up on it and marks
it as inactive. And after that, setup_tap_static won't work any
more.
I never noticed this as a problem before because usually we do
setup_tap_static before that point. But it seems in the vnc
client tests, on aarch64, desktop boot and login is slow enough
that by the time we switch to a VT and try to setup the network,
we're very close to that cutoff, and sometimes miss it.
This, I hope, avoids the problem by doing the network setup in
that test before we deal with the desktop login, then doing the
desktop login, then doing the actual VNC bits.
The alternative here would be to figure out a better way to do
setup_tap_static, but I can't.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Seems like this often fails when booting the desktop disk image
on aarch64 if we start typing right away.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It seems like it can be *really* slow on aarch64, since 218:
https://github.com/cockpit-project/cockpit/issues/14840
this should give it a total of 180 seconds on aarch64 (90 second
still screen timeout plus 30 second assert_screen timeout, with
1.5x scale).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This sets us up to test the release-blocking aarch64 disk images
(Minimal, Server and Workstation). It also allows for testing
armhfp disk images on aarch64 worker hosts (though my testing of
that isn't going too well so far), and fixes the initial-setup
handling for a change upstream ('use password' is now the default
so we don't need to choose it). We rewire disk image deployment
test loading to work through the generic loader code rather than
using ENTRYPOINT, as it allows us to more gracefully handle
graphical (Workstation) vs. console (Server, Minimal), moving
the code for handling console initial-setup to a helper function
just like the code for gnome-initial-setup and having _console_
wait_login call it when appropriate. We also tweak desktop_vt a
bit because now we need to switch from a console running as test
to a desktop, which breaks the assumption that the highest
numbered session of user test is the desktop...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I noticed today that if we deploy FreeIPA with dnssec validation
enabled, dnf can't resolve dl.fedoraproject.org afterwards, which
is a problem because it means we wind up falling through to
random mirrors for metadata and package download once the server
is deployed, which can be slow and give old packages. This seems
to be why the server upgrade test on F33 is sometimes failing
because we get an older FreeIPA package on upgrade, even though
the newer one has been stable for a week.
It's difficult to pin down exactly where this bug is and fix it,
I've mailed some folks to try and work it out, but until that's
figured out, let's just disable dnssec validation.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We've been getting failures lately on the first page load, I
think because Firefox is getting even more grindy on startup. So
turn the 'sleep' into a 'wait_still_screen', extend another wait,
and tweak the 'browser' needle so it only matches after the
bookmark bar has loaded rather than as soon as half the chrome
appears. Also make all the wait_still_screens use similarity 45
for consistency (flashing cursor could be there on any of them).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This check wasn't working, the test passed whatever wait_serial
found. This version suggested by defolos works, I checked.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is the best option I can come up with to deal with #195.
Update notifications seem to have become transient in KDE lately
(even in F31 and F32, if I'm looking at these screenshots right).
This actually simplifies things a lot to do more or less the
same in the KDE and GNOME paths: open the 'permanent' store of
notifications (in GNOME you get to it by clicking on the clock,
in KDE via the systray) and then look for no notifications (live
path) or only an update notification (post-install path). We
only run this test for composes so we shouldn't need to worry
about anything older than F32, and I believe this should work
for KDE in F32 and F33. I left out click_unwanted_notifications
for now as I'm hoping it should be unnecessary, but we can add
it back in if necessary.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This does some of the things suggested by cheimes in
https://bugzilla.redhat.com/show_bug.cgi?id=1880628#c24 . It
seems to make the replica tests work with resolved, still work
with pre-F33 resolving, and not break anything. Also remove the
workaround to disable resolved if it's running, as we can now
work with it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We don't need a separate 'welcome' needle because it just matches
on an OK button anyway. So turn that needle into an OK needle
(we don't have any existing 'blue OK button' needle) and simplify
the logic to a single loop for kde_ok and krusader_settings_close.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
On ppc64le it looks like this test is often failing because it
takes a second or two to update the partition list after we
click update settings, but we're not waiting for that, so we
wind up clicking in the wrong place because we match the next
partition needle before the list is refreshed but click after
it's refreshed. Let's hope these waits solve it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Having systemd-resolved in use seems to cause problems for
FreeIPA servers:
https://bugzilla.redhat.com/show_bug.cgi?id=1880628
until the scripts are enhanced to do this or something, let's
disable it before server/replica deployment.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
ipa-replica-install already changes the DNS config to use the
local bind instance, we don't need to do this and it's actually
wrong (as it bypasses the local BIND we should use and uses
the VM host's DNS servers instead).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Seems what they had before worked until systemd-resolved became
the default; now we need to make sure we do nmcli mod and then
bring the connection down and up, as we do in tapnet.pm. Writing
to resolv.conf is kinda "wrong" for resolved but I don't think
it really breaks anything so I think I'll just leave those bits
in until F32 goes EOL just in case they're still somehow needed
on F31 or F32.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
https://openqa.fedoraproject.org/tests/667693#step/desktop_browser/8
shows us matching on Save File when the window is in kind of a
borked state; we'd probably wind up clicking on Open with,
because by the time we click the content of the window will have
moved to where it's actually supposed to be...so let's try this
to slow it down a bit.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Getting some odd failures where the downloaded file doesn't show
up in the right place which I think might be due to over rapid
clicking here. Try and slow it down a bit.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This should work even if the ifcfg plugin is not present (hi,
CoreOS) or 'predictable' (har) network names are on.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's a complex bug in current Rawhide affecting the database
server test; it boils down to "deployment fails because LANG is
set to a locale for which the corresponding langpack is not
installed". As we know broadly what's going on there now, let's
work around it with a soft failure so we catch any later bugs in
the process.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The time before the ssh key provision request goes through turns
out to be kinda unpredictable, so instead of just a hardcoded
wait then assuming it should succeed, let's do a loop-y retry
thing instead.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The FreeIPA UI change that the previous commit adapted to is in
4.8.9. That's stable for Rawhide and F33 already, but still in
testing for F32, and won't go to F31. So we need to make the
change conditional on release number, and we also add the update
to workarounds for F32 so we don't have to do something awkward
while we wait for it to go stable.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
OTP field was moved into the last position in the password change dialog
to prevent issues with OTP code expiring while users enter their
passwords.
Signed-off-by: Alexander Bokovoy <abokovoy@redhat.com>
GNOME now also splits 'Restart...' and 'Power Off...' as KDE
does, so we need to tweak the conditional and add some needles.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In Fedora 33, we generally no longer include a disk-based swap
partition by default (instead swap-on-ZRAM is used, see
https://fedoraproject.org/wiki/Changes/SwapOnZRAM ). This tweaks
our tests to account for that. In tests that aren't to do with
swap at all, we stop including a swap partition in order to be
closer to the default layout. We replace the old _no_swap blivet
and custom tests with _with_swap tests that, as the name implies,
*explicitly include* a swap partition, and adjust the postinstall
test to check the disk swap partition is there.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
30 seconds doesn't seem to be reliable enough. Let's try 60, if
that's not enough I'll try and think of something smarter.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Just repositioning the mouse appears not to be enough to prevent
the sesssion going idle any more, since the 20200731.n.0 compose.
Not sure what causes this, probably the kernel. Adding a space
keypress seems to help in both KDE and GNOME.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is a bit complex to automate, because we cannot really use
the production Zezere server (provision.fedoraproject.org) as
the test case shows, as we'd have to solve authentication and
we also don't really want to constantly keep registering new
hosts to it that are going to disappear and never be seen again.
So, instead we'll do it by setting up our *own* Zezere, and
provisioning our IoT system in that. We run two tests. The
'ignition' test is the actual IoT 'device'; all it really does
is boot up, sit around, and wait to be provisioned. The 'server'
test first sets up a Zezere server, then logs into it, adds an
ssh key, claims the IoT device, provisions it, and connects to
it to create a special file which tells the 'ignition' test
everything worked and it can close out.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is to make the infra folks happy, apparently using 10.0.x.x
and 10.1.x.x is causing conflicts since our actual infra network
uses those ranges too.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It actually is supposed to be installed by default, so if it's
missing that's a bug. It's been added to comps now so it should
be there from now on.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It got split out and is not installed by default in 33-0.8. This
is intentional, not a bug, see https://pagure.io/fesco/issue/2114
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This adds a test that automates
https://fedoraproject.org/wiki/QA:Testcase_Clevis. It requires
os-autoinst-4.6-18.20200623git5038d8c or newer, and a worker
host in the 'tpm' class which is set up to have an instance of
swtpm running at /tmp/mytpmX , where X is the worker instance
number, for each worker. The Fedora infrastructure ansible
plays have been updated to handle this via an instantiated
systemd service, which other instances can also adopt.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
`cp -R foo/*` doesn't get all files in `foo/`, it misses hidden
files. This turns out to be a problem with recent anaconda, as
it expects to find a .treeinfo file here. So, let's use rsync.
We could probably do this with cp too but I can't think of the
right arguments right now...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This adds a pair of tests, one which does almost all the work
from the test case, the other just a client test to check that
we can connect to an HTTP server running in a container on the
host. We also have to bump the _console_wait_login timeout on
this path a bit as we're booting a disk image that was installed
with DHCP working, but we change the network setup so DHCP does
not work any more, and the system spends quite some time trying
to bring the network up on boot before eventually giving up and
proceeding.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Here we are creating ~/.config for a newly-created user with root
ownership. We can't leave it that way, as commands run as the
user account won't be able to change it, as they should be able
to. So we need to change the ownership (and, just in case, fix
SELinux contexts) afterwards.
This was the real source of the problem we were seeing (the test
failing early due to the gsettings command which should turn the
screen background black failing).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We're trying to launch stuff the instant we see a desktop, and
it seems to be failing quite often in GNOME. Let's give it a few
seconds.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
IoT does nightly Branched and Rawhide composes that are built
as RC candidates, for some reason. So let's except it from this
check.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I started out trying to fix os-release for the recent change to
add "Prerelease" tags to the VERSION and PRETTY_NAME fields, then
things spiralled. It got me thinking about the awkward DEVELOPMENT
variable we use, so I decided to get rid of it and refactor the
few things that use it. I refactored the anaconda prerelease tag
check, and wrote a new giant comment that gives details about
exactly how anaconda decides whether to show those tags, to give
context to our choices about when to expect them. This check now
uses a new LABEL variable the scheduler now sets. I also wound up
creating new UP1REL and UP2REL vars to define the 'source' release
for upgrade tests, separate from CURRREL and PREVREL, which are
now never lies - they really are the current stable and previous
stable release, even for update upgrade tests.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The update live image build test keeps running out of disk space.
We've bumped the minimal disk image from 12GB all the way up to
20GB so far but it keeps happening. So let's try a different
strategy: use a scratch disk to mount /var/lib/mock. That's where
all the space gets used. This should allow us to reduce the size
of the minimal disk image again, and giving it 25GB of empty disk
should avoid it running out of space again for a while.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is failing on every update and that's not telling us anything
useful - we already know about the bug - so let's work around it.
Not adding a softfail as it's a bit more awkward to do that.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We can get tripped up by the tutorial screen when launching
Boxes; borrow some code from the app start/stop test to check for
and handle it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The default timeout for check_screen is 0, so we were only giving
the enter key press a fraction of a second to take effect before
expecting to see locked_screen_switch_user. This is too tight,
see https://openqa.fedoraproject.org/tests/586257 . Let's give it
five seconds before we give up.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Since GDM shows the "system-menu-button", it could not correctly
switch users on a locked screen. I added a check to see
if we are on a locked screen and behave accordingly.
This adds a new test that implementsQA:Testcase_desktop_login
on both GNOME and KDE.
While working on this, we realized that the "desktop_clean"
needles were really "app menu" needles, and for KDE, this was
a duplication with the new "system menu" needles, because on KDE
the app menu and the system menu are the same. So I (Adam)
started to de-duplicate that, but also realized that "app menu
button" is a much more accurate name for these needles, so I was
renaming the old desktop_clean needles to app_menu_button. That
led me to the realization that "check_desktop_clean" is itself a
dumb name, because we don't (at least, any more, way back in the
mists of time we may have done) do anything to check that the
desktop is "clean" - we're really just asserting that we're at a
desktop *at all*. While thinking *that* through, I *also* realized
that the whole "open the overview and look for the app grid icon"
workaround it did is no longer necessary, because GNOME doesn't
use a translucent top bar any more. That went away in GNOME 3.32,
which is in Fedora 30, our oldest supported release.
So I threw that away, renamed the function "check_desktop",
cleaned up all the needle naming and tagging, and also added an
app menu needle for GNOME in Japanese because we were missing
one (the Japanese tests have been using the "app grid icon"
workaround the whole time).
This stuff is kinda broken in various ways and halfline thinks
he can fix the underlying bug anyway. So let's go back to just
the GNOME live test being broken for now.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I tested this workaround on staging before pushing it to git and
it worked, but then when I pushed it to prod it didn't work. On
stg I also had this to set GDM to debugging mode, so maybe this
is also needed for the workaround to work for some reason?
Signed-off-by: Adam Williamson <awilliam@redhat.com>
A GNOME bug seems to result in us getting to GDM, not a liveuser
desktop, after running 'systemctl isolate graphical.target' from
a live boot to runlevel 3 since the end of March. This works
around that to let the test run, as it's not really a failure of
the test per se.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Previous commit same summary had some side effect
solved by this new one.
And avoid a warning in autoinst-log when ABRT var not defined.
Signed-off-by: Michel Normand <normand@linux.vnet.ibm.com>
I merged the previous commit before realizing the ordering was
wrong. All other 'actions' lines have to come *before* the one
that adds 'reboot', because one of the conditions for that is
whether @actions is populated - basically, if we're taking any
actions, we also have to reboot afterwards. If we add an action
*after* that line (but no actions were added before that line),
we'll do it but then not reboot and the test will break.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This reverts commit 00b756f0e2.
Unfortunately, I made a typo in the script and the fix did not
work. I do not want to rebase the master (in order not to break
things for everyone) so I am reverting again.
Sorry.
This reverts commit d784bf54ca.
It turned out that Locations are not connected to Konqueror
at all. The reason why the test is failing is that the
application has been removed to limit the number of
web browsers.
We seem to be seeing the bug this works around:
https://bugzilla.redhat.com/show_bug.cgi?id=1765685
in F30 and F31 update tests even with this wait. At least, it
looks that way. Trying this to see if a longer wait helps.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
RHBZ #1692972 was fixed long ago, so we don't need to worry
about that any more. But this test failed on the recent F31 live
respin compose because it was changed to assume the tutorial
would appear on startup, which only happens on F32+. To make the
test work on F31 respins, let's handle both paths. Once F32 is
stable we can drop this as we won't run the test on F31 any more
after that.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
IoT created a branch that's basically Rawhide but is versioned
33. This causes the release_identification tests to fail. I don't
think they'll change this on their end, so let's just have the
test cope with it and expect branches versioned as the Rawhide
release number to behave as Rawhide does here.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It seems to be actually installing fedora-release-silverblue now
so we get correct identification here. Update the tests.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
https://bodhi.fedoraproject.org/updates/FEDORA-2020-1070052d10#comment-1284223
It seems the rootfs on the Fedora 30 installer images we build at
present has gotten very big, so big that an update which contains
some very slightly larger firmware packages causes the rootfs to
be completely full (though lorax doesn't fail) and the image
doesn't boot.
I don't yet know when or why the rootfs got that big, but it's
not really a bug in this update, so for now let's just tell
lorax to use a bigger rootfs so the tests pass for this and any
similar future updates, until I can maybe find time to pinpoint
the culprit more precisely.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Initial implementation wasn't correct, I forgot CURRREL is not
'the pre-upgrade release version' but just 'the current stable
release'. This is a dumb way to figure out the correct release
number for this context but off-hand I can't think of a better
one.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
When there's a failed service we get a stupid bullet-point char
at the start of its line, and all the other lines are space-
padded to match indentation. Which is annoying! This (I hope)
ditches that crap without losing anything of value.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Also comment this better. We need to index from the end of the
string here, not the start, because going from the start breaks
when the compose shortname has a dash in it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Per https://github.com/weldr/lorax/pull/881 it wasn't doing
anything anyway, and using it causes the command to fail in F32
and later.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
https://github.com/rpm-software-management/mock/commit/cb25d3ba
changes existing mock configs for stable releases to have a
`dnf.conf` section instead of a `yum.conf` section, and this
change got pushed out to F30 and F31, which breaks us :( Our
mock config that we use for building live images assumes the
existence of a `yum.conf` section in the config it inherits
from.
This change is now stable for F30 and F31, so at least we don't
have to do any conditional shenanigans; we can just change to
'the new style' unconditionally and things should work OK.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
IoT is becoming a release-blocking edition for F32, so we should
be testing it for sure. We may add specific tests, but for now
let's run the install and base tests on it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
On graphical flavors we are not at a console when this test runs.
We need to do root_console to get there, and also bypass_1691487
for ppc64le. Copied from base_selinux.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
