That whole creaky edifice of conditionals that figured out how
many times to press 'down' was a mess I always hated, and I just
found out that the fix for BLS wasn't complete - I'd assumed in
writing it that systems weren't being migrated to BLS on upgrade
to F30, but actually they are. This makes that design very hard
as we'd have had to find a way to change the number of 'down'
presses part-way through update tests, and all the ways I can
think of to do that would've made this even sillier.
Happily I managed to come up with what looks like a much simpler
approach: just go from the bottom. It seems that in every setup
I can think of to check - all three arches, BLS, no BLS, pre-
install, post-install - the linux line is two lines up from the
bottom of the config stanza (the last line is blank, and the
last line but one is the initramfs line). So we can just press
down 50 times (to make damn sure we're at the bottom) then press
up twice and we should be in the right place, no matter the arch,
the release, or if BLS is in use or not. Whew.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This bug is breaking all update FreeIPA tests; until the updates
go stable, let's pull them in to update tests so the results
are useful.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
fd files don't work on aarch64, it seems. Drop BIOS even though
it's probably not breaking anything as I don't intend to move
aarch64 to prod until prod is up to new openQA, so no need to
stay compatible.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In recent os-autoinst the old 'stuff it all in HDDMODEL' doesn't
work and tells you to do it like this. This way does work in the
older os-autoinst currently on prod too, so this should be fine.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We're about to deploy recent os-autoinst to staging. The UEFI
stuff got rewritten since the version we currently have, and
this is now the recommended way to handle UEFI firmware. The
new vars shouldn't confuse the old code still deployed on prod,
it should just ignore these vars and keep working off the old
'UEFI=1' (which causes it to autodetect the file locations).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The one we were using before doesn't seem to exist any more in
Rawhide. /etc/os-release should be fine.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Now the BLS stuff is enabled in Rawhide, we need to press 'down'
a different number of times to reach the 'linux' line when
editing the boot params (I really, really wish there was a
better way to do this :<). It gets tricky as there are all sorts
of cases here (support_server tests use a CURRREL disk image,
and then there's upgrade tests)...I think this covers things for
now.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
From local experimentation, it still actually produces the
output, even though it prints the message about the order being
wrong and exits 1.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Weirdly, occasionally some update tests seem to fail because
the 'comm' util we use to produce the list of packages from the
update that were actually tested during the job doesn't think
one of the input files is in alphabetical order, even though we
sort them both when they're produced. I don't know if this is
possibly due to the definition of 'alphabetical order' changing
as part of the update, or what. But we really shouldn't *fail*
the test when this happens, as it's not part of the functional
test, we're just producing convenience data. So, let's handle
the command failing, and if it happens, upload the input files
so we can maybe figure out why it's unhappy...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Since a recent sssd update, console login during FreeIPA tests
is taking unusually long. We don't want this to fail all the
tests, so let's extend the timeout, but with a soft fail.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The previous commit would lead to the 'workaround' getting hit
incorrectly, and might have had some other issues...tweak it a
bit.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
GNOME Software 3.30.5 split the offline update process into two
separate 'download' and 'apply' phases. So we need to handle
clicking 'download' before 'apply', if that happens.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Somehow, recently, FreeIPA tests are running into Firefox not
quitting because it's showing a warning about closing multiple
tabs. (I think we didn't *get* multiple tabs before but now we
do, for some reason). So let's work around this by clicking
"Close tabs" if the warning appears.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We updated the dispatcher code, but not the templates...so we
didn't have any actual tests to run on Silverblue images. Let's
fix that. Note this means we won't test F28 and earlier images
that still have 'AtomicWorkstation' as their subvariant any
more, unless I set up some sorta workaround in the dispatcher.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Time for the great video driver merry-go-round again...lately
we're having some issues with vt corruption and rendering over
the boot splash, let's try using 'std' driver to see if it
helps a bit. stg has been set up this way for a couple of days
and it's not blowing up at least.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Lately, we can't be sure the desktop will be on tty1 after we
do 'systemctl isolate graphical.target'. For recent Workstation
lives it actually shows up on tty2.
We could be 'clever' and switch to tty2 on F29+ Workstation
lives...but actually it seems like if we just don't do anything,
systemd switches us to the correct tty. So let's rely on that,
at least as long as it's working.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
At least one test (desktop_notifications_postinstall) boots from
the disk image uploaded by install_default_upload, and needs to
access the grub menu. On F29+ Workstation this is failing,
because the grub menu is now hidden by default, so when the test
boots, it never sees the bootloader screen, and fails.
I considered trying to teach it to hold down shift or hit f8 or
esc at the right time, but that seems like it might be hard. So
instead let's just try to disable the hidden menu when we're
about to upload the installed system image. This is kinda going
against the 'preserve natural system behaviour' principle we try
to use for openQA, but I think it's OK as we do have other tests
that will exercise the 'hidden boot menu' stuff to some extent.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
On F27 we don't get a 'Software is up to date' screen because
there's an upgrade available. Let's work with the refresh button
instead.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We're not seeing *exactly* #1314991 any more, but we're seeing
something that looks quite similar: the first attempt to find
updates just doesn't find any. No error message, no updates. I
have reported a bug for this and am investigating it, in the
meantime, let's restore the workaround, elaborated a bit, and
looking for the 'Software is up to date' screen instead of the
error message.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I rather suspect the *bug* is still basically present and it's
why this test often fails, but we no longer seem to see the
*error message* which lets us detect the bug happening. This
needle has not been hit by any test for six months. So let's
remove the workaround as it adds complexity.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
For some reason, in recent tests, switching to a console after
live install completes is taking a long time, and tests are
failing because we 'only' allow 10 seconds for the login prompt
to appear. This seems to indicate some kind of performance bug,
but we don't really want all liveinst tests to fail on in, this
is not primarily a performance testing framework. So let's
tweak the root_console / console_login bits a bit to allow a
configurable timeout for the login prompt to appear, and use
that to wait 30 secs instead of 10 in this case.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The FreeIPA upgrade test didn't actually check that FreeIPA is
actually running after the upgrade and reboot, it just kinda
assumed it is. Let's add a check to the start of the 'check'
test module that makes sure ipa.service actually comes up to
'active' state. This'll make it clearer when tests are failing
because FreeIPA didn't come up right after the upgrade. The
check will run on non-upgrade tests too, but that's fine.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This adds a new test intended to just check boot chain things
for updates. It doesn't run any test modules besides the stock
update ones, but sets a variable, ADVISORY_BOOT_TEST, which
causes _advisory_update to do some additional stuff after
installing the updates but before rebooting: it forces regen
of the initramfs and bootloader config, and reinstalls the
bootloader on BIOS (not UEFI as it's not relevant). If the
following boot fails, we probably have a bug somewhere.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In recent Rawhide, it seems the Workstation live session runs on
tty2 not tty1 for some reason. This throws off anacondatest
root_console, which assumes there'll be a vt on tty2. Handle it
by using tty3 instead if we're in a GNOME live environment.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's this annoying problem where the screen sometimes goes
messed up after ipa-server-uninstall. 'clear' doesn't seem to
really work to fix it up either. Let's try flipping between
ttys. I don't like this much as it's already a pain trying to
work out / remember what tty we might possibly be on at any
given time, but I think we're always on either 1 or 3 here, so
let's do ctrl-alt-f1 ctrl-alt-f3 to ensure at least one change
and wind up on tty3...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
They can't be in universal as there's no install_default_upload
for them to run after. Let's just run on the Server DVD install
like we do many other post-install tests.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Looking at this, it's a bit weird: the updated packages are
actually included in the upgrade process, but we still run
_advisory_update, which does basically nothing...then reboots.
That's kinda silly and makes the tests a bit flaky, let's fix
it. I don't think there's actually any problem with doing the
upload of updatepkgs.txt in _repo_setup_updates, becase that
already guards against being run more than once, it just bails
very early if it's already been run.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
