When we run Firefox directly on X lately, we often hit a bug
where X just suddenly exits in the middle of doing stuff in
Firefox. I'm not sure if this is a bug in X or in Firefox (if
Firefox crashed, X would immediately exit). Let's see if this
helps get any info on what's going on with Firefox.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
On Rawhide update tests we often don't seem to get to the login
prompt in 10 seconds, so tweak the code a bit to let us specify
a timeout in root_console, and use 30 seconds here.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
When we're logging via the serial console when a test fails and
no network is available, we only log the journal from the current
boot. But we might well need to see messages from previous boots.
So let's just log the whole journal.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Remove a bunch of needles that have not been used for some time,
plus a few workarounds that are similarly stale.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Inspired by openQA's 01-compile-check-all.t, this adds a perl
test which checks the syntax of main.pm and all lib and test
files, and hooks it up to CI. Requires os-autoinst and
perl-Test-Strict.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There is nothing inherently 'root'-y about these so it makes no
sense to prefix their names with 'root-'. And why change from
'console' to 'terminal' compared to the naming used in the
actual qemu command and the log files? It's just confusing.
Let's be consistent (except for using - instead of _ here...
but - is easier to type!)
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The log files are all under the ostree deploy root, the 'real'
system root has nothing useful. Try and find the deploy root
and prepend it to all the relevant commands if we're a CANNED
install.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This was necessary for debugging the FreeIPA 4.8 pre-release
update bug, so let's have it for all runs, just in case.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We're getting an intermittent case where FreeIPA tests fail
because of a web server certificate issue. Click 'Advanced' in
Firefox when this happens so we can get a bit more info on the
problem.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Just like the installer image build test, only...it builds a live
image. This involves reimplementing quite a chunk of the Koji
livemedia task. Ah, well. Also involves rethinking the flavor
names a bit here, these seem...better.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This adds a test which builds a netinst image potentially with
the package(s) from the update, and uploads that image. It also
adds a test which runs a default install using that image. This
is intended to check whether the update breaks the creation or
use of install images; particularly this will let us test
anaconda etc. updates. We also update the minimal disk image
name, as we have to make it bigger to accommodate this test,
and making it bigger changes its name - the actual change to
the disk image itself is in createhdds. We also have to redo a
bunch of installer needles for F28 fonts, after I removed them
a month or so back...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
If a test fails to the dracut shell, we currently don't do
anything useful. This should recognize when that happens, and
upload rdsosreport.txt.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This should fix log collection when a French or Japanese test
fails before the test itself would have done this.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
If an update test fails before reaching advisory_post, we don't
generate the 'what update packages were installed' and 'were
any update packages *not* installed when they should have been'
logs, but these may well be useful for diagnosing the failure -
so let's also do the same stuff there. Only let's not do it all
twice.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Sometimes we get a test failing because the SUT isn't connecting
to the network for some reason. In this case we never get any
logs, because `upload_logs` relies on being able to reacht at
least the worker host system via the network.
This attempts to detect when we can't ping the worker host, and
in that case, send some info out over the serial line instead.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We were doing this in a post-install test, but not on failures.
We need it to figure out why Firefox is crashing on aarch64...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Previous approach wouldn't work for tests that run after the
install test...let's just set a password from a chroot after
install completes. Don't really like this as it changes the
'real' install process a bit, but it's the least invasive short
term fix at least. We can maybe do something more sudo-y later
with a bit more thought.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It's really INSTALL_NO_USER, not USER_LOGIN='false'. Also, we
need to make root_console work with no root password, sigh.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Committing without review as this is pretty trivial and I've
had it on staging for the last few days without issue. Just gets
us somewhat better info for debugging FreeIPA issues.
Summary:
This is to handle cases like #1414904 , where the system boots
to emergency mode. We really need logs to try and debug this.
Test Plan:
Force a test to hit emergency mode somehow (right now
you can just run base_services_start on Rawhide over and over
until you hit #1414904, but there's probably an easier way to
do it, I think there's a systemd boot arg to tell it which target
to boot for e.g.) and check logs get uploaded. Also check this
doesn't break log upload for a 'normal' failure.
Reviewers: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Reviewed By: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1103
Summary:
This adds a couple of new exporter modules, renames main_common
to utils (this is a better name: openSUSE's main_common is
functions used in main.pm, utils is what they call their module
full of miscellaneous commonly-used functions), and moves a
bunch of utility functions that were previously needlessly
implemented as instance methods in base classes into the
exporter modules. That means we can get rid of all the annoying
$self-> syntax for calling them.
We get rid of `fedorabase` entirely, as it's no longer useful
for anything. Other base classes keep the 'standard' methods
(like `post_fail_hook`) and methods which actually need to be
methods (like `root_console`, whose behaviour is different in
anacondatest and installedtest).
Test Plan:
Do a full test suite run and check everything lines
up. There should be no functional differences from before at all,
this is just a re-org.
Reviewers: jskladan, garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Reviewed By: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1080
The README looks pretty ugly on Pagure. So let's unwrap it.
Let's also move the function docs into the source files. We're
much more likely to keep them up to date that way, I think. We
should probably change over to proper perl POD documentation at
some point, but comments in-line are OK for now I think.
This should solve all those annoying "Failed to synchronize
cache for repo 'updates'" failures we've had: there's no need
for the 'updates' repository to be enabled when we've decided
we want the `repo_setup` changes to be made, and having it
enabled causes problems when we run right after the Rawhide
compose completes. We hit the awkward period where the rawhide
repo has been synced but mirrormanager has not been updated
with the new metadata checksums, so mirrormanager rejects the
metadata from dl.fp.o and DNF has to go out and hit other
mirrors until it finds one which didn't sync yet. Since the
point of `repo_setup` is specifically to hack up the config so
we only use packages from the compose *anyway*, there's no
reason at all to worry about leaving 'updates' enabled and
nerfing it like we do 'fedora' and 'rawhide', we can just turn
it off.
Summary:
The current installedtest post_fail_hook assumes /var/tmp/abrt
exists at all, and dies if it doesn't, leading to no /var/log
upload. We can also avoid using openQA `script_output` - which
is annoyingly indirect and slow - by using this neat `test -n`
trick I found on SO. Let's also use it in the anacondatest
post_fail_hook to avoid uploading /var/tmp when it's empty
(which we currently do). This also drops the 0 arg from a few
more script_run calls, because it's safe to wait for the run
to complete and we should probably do so to avoid later typing
errors if the commands are slow.
Test Plan:
Cause both anaconda and installed tests to fail and
check the hooks work as intended. Maybe twiddle the failures to
ensure directories do and don't exist and/or have contents and
make sure things work OK. I've tested this to some degree and
I'm pretty sure it works right.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1041
It's not always in minimal installs. This is a simple change
and needed to make the post-fail hook work for minimal installs,
so pushing without review.
Summary:
os-autoinst implements `script_run` itself now, we aren't
required to implement it ourselves any more. os-autoinst's
implementation is better than ours, as it allows for verifying
the script actually ran (via the redirect-output-to-serial-
console trick).
So this drops our implementation so we'll just use the upstream
one. Where I judged we don't want to bother with the 'check
the command actually ran' feature I've adjusted our direct
`script_run` calls to pass a wait time of 0, which skips the
'wait for command to run' stuff entirely and just does a simple
'type the string and hit enter'.
Because of how the inheritance works, our `assert_script_run`
calls already used the os-autoinst `script_run`, rather than
the one from our distribution.
This should prevent `prepare_test_packages` sometimes going
wrong right after removing the python3-kickstart package, as
we'll properly wait for that removal to complete now (before
we weren't, we'd just start typing the next command while it
was still running, which could result in lost keypresses).
Test Plan:
Check all tests still run OK (I've tried this on
staging and it seems fine).
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1034
Summary:
Since we can match on multiple needles, we can drop the loop
from console_login and instead do it this way, which is simpler
and should work better on ARM (the timeouts will scale and
allow ARM to be slow here). Also move it to main_common as
there's no logical reason for it to be a class method.
Also remove the `check` arg. `check` was only set to 0 by two
tests, _console_shutdown and anacondatest's _post_fail_hook.
For _console_shutdown, I think I just wanted to give it the
best possible chance of succeeding. But we're really not going
to lose anything significant by checking, the only case where
check=>0 would've helped is if the 'good' needle had stopped
matching, and all sorts of other tests will fail in that case.
anacondatest was only using it to save a screenshot of whatever
was on the tty if it didn't reach a root console, which doesn't
seem that useful, and we'll get screenshots from check_screen
and assert_screen anyway.
Test Plan:
Run all tests, check they behave as expected and
none inappropriately fails on console login.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1016
use 'ps' output for Xorg and Xwayland. We'd need some new
openQA var to get this right by 'guessing', as it's vt1 for
Workstation when running live - so long as autologin worked -
but vt2 after install. We'd need a var or some other thing to
detect which case we're running in. LIVE doesn't do it, it's
set even when running a post-install test from a live image.
So instead let's just do it a bit more cleverly. This also
gives us a bit of insurance against changes in GDM, SDDM etc.
behaviour, so long as Xwayland or Xorg is running (and we can
add additional processes to the list, like gnome-shell, if
needed/appropriate). We assume the *final* listed process -
i.e. the most recently-started one - will be the desktop;
this covers gdm's behaviour of starting up on vt1 then running
the user session on vt2. We can make this function more complex
and add args if we ever get to the point where we have multi-
user tests running or anything (e.g. allow to pass a username
and only look for that user's processes).
Landing without review as this broke the live variant of the
test on Workstation in production (kinda not sure why it worked
in testing, or I didn't notice that it failed, but never mind).
I've tested it on staging.
Summary:
Very similar to the CLI update test, but using the desktops'
update applications. This is based off the CLI update test
branch as it uses the shared functions that branch introduced.
We do not use the fake update packages, as they don't really
do anything useful for these tests; for dnf they can help us
distinguish between issues with the dnf mechanism and issues
with the repos, but we can't really tell that in the graphical
case. So we only use the python3-kickstart package here.
Test Plan:
Run the test on both KDE and GNOME and ensure it
performs as intended. I've been testing it on staging, so you
can see it there.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1010
Summary:
tty2 is where wayland desktop sessions run. I think it makes
sense to use a high tty for the post_fail_hook, so we know the
lower ones can be used by the tests...
Test Plan:
Run a Workstation post-install test that fails, check
the hook works.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D1003
Summary:
the main thing this does is try and type slower in X - this
should cover nearly everywhere we type anything in X, and make
it type slower. We also add a bit more safety checking to some
old tests which didn't have it (mainly _do_install_and_reboot)
- wait_still_screen after typing to make sure all the keypresses
were registered before continuing.
This is an attempt to mitigate the problems we've seen where
the wrong text gets typed into the wrong places and the tests
break.
This branch is live on staging atm. It still has *some* issues,
but I do think it's an improvement.
Test Plan:
run the tests (probably several times), compare to
runs without the change, see if it's better or worse...
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D993
cockpit 118 just landed in Rawhide, and it seems the username
field on the login screen is no longer selected by default,
you have to hit tab to navigate to it. We could get smart and
store the cockpit version in a variable or something, but it
doesn't seem worth it for now, let's just use a simple 'if
rawhide' conditional which can be adjusted as necessary as
things change.
https://github.com/cockpit-project/cockpit/issues/5000
when we run firefox in a bare X session, by default we get an
800x600 firefox in a 1024x768 X server with some dead black
space to the right and bottom of the screen. Now it turns out
that if the mouse is in the dead space, Firefox will not get
any keystrokes we send.
This didn't used to be a problem, but I made it into one with
this os-autoinst change:
https://github.com/os-autoinst/os-autoinst/pull/559
that makes os-autoinst move the cursor to 1023,767 after each
`assert_and_click`, instead of 0x0 as it did before, unless the
cursor has previously been explicitly place somewhere. So in
this case it gets moved to the dead space, and Firefox stops
responding to keypresses after the first `assert_and_click`.
We could equally well fix this by setting the cursor to 0,0
after running Firefox, but I like this more as it makes sure
we won't run into the same problem some other way, and makes
the videos and screenshots look nicer.
This fixes the realmd_join_cockpit test that's been failing
ever since I installed an os-autoinst with that fix. Committing
without review as it's a straightforward fix and I want the
test working again...
