Summary:
Set up the support server to provide DHCP/DNS functionality and
an NFS server, providing a kickstart. Add a kickstart test just
like the other root-user-crypted-net kickstart tests except it
gets the kickstart from the support server via NFS. Also add NFS
repository tests and a second support server for Server-dvd-iso
flavor: this test must run on that flavor to ensure that packages
are actually available. The support server just mounts the
attached 'DVD' and exports it via NFS.
Note we don't need to do anything clever to avoid IP conflicts
between the two support servers, because os-autoinst-openvswitch
ensures each worker group is on its own VLAN.
As part of adding the NFS repo tests, I did a bit of cleanup,
moving little things we were repeating a lot into anacondatest,
and sharing the 'check if the repo was used' logic between all
the tests (by making it into a test step that's loaded for all
of them). I also simplified the 'was repo used' checks a bit,
it seems silly to run a 'grep' command inside the VM then have
os-autoinst do a grep on the output (which is effectively what
we were doing before), instead we'll just use a single grep
within the VM, and clean up the messy quoting/escaping a bit.
Test Plan:
Run all tests - at least all repository tests - and
check they work (make sure the tests are actually still sane,
not just that they pass). I've done runs of all the repo tests
and they look good to me, but please double-check. I'm currently
re-running the whole 24-20160609.n.0 test on staging with these
changes.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D888
Summary:
this is following a SUSE model for tests where we need a server
end but don't want setting up the server to constitute a real
test in itself, we want it to be stable. The 'support_server'
test just boots a pre-built (by createhdds) disk image, sets up
networking, and runs the iSCSI server.
To run the iSCSI test we need to handle networking config in
anaconda (or we would need to set the support server up as a
DHCP server, which may be worth considering), so this adds that.
We also need to be able to specify the target device for a
volume in custom partitioning, so this adds that too.
Test Plan:
Build the necessary support server disk image (use
D883), then run the test and make sure it works. Also make sure
all other tests continue to work.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D884
Summary:
This requires a few other changes:
* turn clone_host_resolv into clone_host_file, letting you clone
any given host file (cloning /etc/hosts seems to make both
server deployment and client enrolment faster/more reliable)
* allow loading of multiple POSTINSTALL tests (so we can share
the freeipa_client_postinstall test). Note this is compatible,
existing uses will work fine
* move initial password change for the IPA test users into the
server deployment test (so the client tests don't conflict over
doing that)
* add GRUB_POSTINSTALL, for specifying boot parameters for boot of
the installed system, and make it work by tweaking _console_wait
_login (doesn't work for _graphical_wait_login yet, as I didn't
need that)
* make the static networking config for tap tests into a library
function so the tests can share it
* handle ABRT problem dirs showing up in /var/spool/abrt as well
as /var/tmp/abrt (because the enrol attempt hits #1330766 and
the crash report shows up in /var/spool/abrt, don't ask me why
the difference, I just work here)
* specify the DNS servers from the worker host's resolv.conf as
the forwarders for the FreeIPA server when deploying it; if we
don't do this, rolekit defaults to using the root servers as
forwarders(!) and thus we get the public, not phx2-appropriate,
results for e.g. mirrors.fedoraproject.org, some of which the
workers can't reach, so PackageKit package install always fails
(boy, was it fun figuring THAT mess out)
Even after all that, the test still doesn't actually pass, but
I'm reasonably confident this is because it's hitting actual bugs,
not because it's broken. It runs into #1330766 nearly every time
(I think I saw *one* time the enrolment actually succeeded), and
seems to run into a subsequent bug I hadn't seen before when
trying to work around that by trying the join again (see
https://bugzilla.redhat.com/show_bug.cgi?id=1330766#c37 ).
Test Plan:
Run the test, see what happens. If you're really lucky,
it'll actually pass. But you'll probably run into #1330766#c37,
I'm mostly posting for comment. You'll need a tap-capable openQA
instance to test this.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D880
Summary:
This adds tests for the Server_cockpit_default and cockpit_basic
test cases. Some notes: I was initially thinking of combining
these into a single test with multiple test modules and coming
up with a system for doing wiki reporting based on individual
test module status, but because we'll also want to do a cockpit
FreeIPA enrol test, I decided against it. We don't really want
to combine all three because then we would skip the cockpit
tests whenever FreeIPA server deployment failed, which isn't
ideal. So since we'll need a separate FreeIPA enrolment test
anyway it doesn't really make sense to go to the trouble of
designing a system for loading multiple postinstall tests (though
I have an idea for that!) and a per-module wiki reporting system.
This was the most minimal and hopefully reliable method for
running Cockpit from a stock Server install that I could think
of. An alternative approach would be to have, say, the most
recent stable Workstation live as a 'stock' asset and have two
tests, one which runs a stock Server install and just waits and
another which boots the live image and accesses the cockpit
running on the other box, but that seems a bit over-complex. It
is not possible to have dependencies between tests for different
ISOs, in case you were wondering about having a Workstation live
test which runs parallel with a Server DVD test, we can't do
that. One funny thing is the font that winds up getting used for
the desktop, but I don't *think* that should be a problem.
Picking needles was a bit tricky; any improvement suggestions
are welcome. I'm hoping it turns out to be safe to rely on some
dbus log messages being present; I think logging into Cockpit
triggers activation of the realmd dbus interface, so there
*should* always be some messages related to that. An alternative
would just be to match on a sliver of the dark grey table header
and the light grey row beneath it and assume that'll always be
the first message (whatever the message is), but then we have to
find some area of the message details screen which is always
present for any message, and it just seems a tad more likely to
result in false passes. Similary I'm making an assumption that
auditd is always going to show up on the first page of the
Services screen and the details screen will always show that
'loaded...enabled' text.
Test Plan:
Run the tests and see if they work! See
https://openqa.stg.fedoraproject.org/tests/21373 and
https://openqa.stg.fedoraproject.org/tests/21371 for my tests.
Reviewers: garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D874
Summary:
the Server DVD now just has 'Fedora Server' and 'Custom
Operating System' environments. Custom is basically minimal.
So we can use the DVD for 'universal' testing again, these
needles match the anaconda_minimal tags.
Test Plan:
Run the 'universal' tests on a DVD ISO with these
needles added, test that they work OK and use the 'Custom' env.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D844
Summary:
Requires new needles and test suite and job template, plus a
few tweaks to handle 'switched' keyboard layouts (so we use the
switched layout in the username and password).
Test Plan:
Run the test and see that it...fails. But that's OK!
It's a genuine bug: RHBZ #1333998 . At least make sure it gets
to that point and no other tests have broken and all the needles
look sane.
Reviewers: garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D846
ARM actually doesn't have "install" test, but in install matrix,
there is test whether ARM disk boots into initial_setup. HDD is saved
after this test for Base tests.
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D853
Summary:
I really just want to add the desktop_terminal test, but I think
this refactor is in order now. It splits up loading of the
various test phases (much as SUSE do it) and allows us to run
the post-install tests without the install tests, for e.g. I
tweaked things to allow the upgrade tests to use the existing
_wait_login tests for final login and combine the two upgrade
postinstall tests into one simple one.
This comes with a bit of a behaviour change to make graphical
wait login behave the same as console wait login: it will log
in unless USER_LOGIN is set to 'false'. Previously it only
logged in if both USER_LOGIN and USER_PASSWORD were set, which
I don't think ever happened in a graphical test, so we never
actually did a graphical login. The intent here is we should do
a login on the default_install tests. That's going a bit beyond
the test case, but it seems like a reasonable thing to test. We
can set USER_LOGIN to false if we don't want to do it.
Test Plan:
Do a full test run, make sure the new tests work and
no old tests break.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D839
Summary:
These require openQA tap networking to allow the server and
client boxes to communicate, and require masquerading (NAT) so
the server at least can reach a repository (dnf/rolekit really,
really do not want to work without a repo connection).
They use the 'parallel' test support to have the server deploy
run first while the client enrol test waits at the grub menu
until the server is done before it goes ahead.
This is all deployed and working on stg. The really tricky bit
was getting all the openvswitch and firewall config right in
ansible.
We *could* do the server deploy test as a follow-on from the
default install test to save the install, but then we'd have to
teach it to change the hostname and set up static networking
post-install. I'm not sure if it's worth doing that.
This requires the corresponding openqa_fedora_tools commit that
adds the hard disks (containing the kickstarts - it's possible
to get them from remote during install, but we have to set up
name resolution or hard code the IP of the server).
Test Plan:
Deploy this and the openqa_fedora_tools commit,
generate the disks, configure the networking (good luck! See
the docs in openqa_fedora_tools) and see if you can run the
tests. If you're using Docker, uh...sorry. You somehow need to
set things up so the workers can use tap interfaces that can
talk to each other and are NATed to the outside world. Have fun.
I can talk you through it on IRC...
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D831
Summary:
There's a weird problem that we hit occasionally only on the
Server image, see e.g.:
https://openqa.fedoraproject.org/tests/14300
I *think* what's happening (thanks hergertme from #gtk+ IRC for
help with this) is that when the 'install done!' text and the
reboot button appears, there's a short transition for the button
so it doesn't look *exactly* like the screenshot right away. If
openQA's needle match loop happens to kick in and check the
match right after the text and button appear, while the
transition is happening, it decides that some random area of the
gradient down the left hand side of the screen matches *better*
than the button, so it 'clicks' that, and we don't get a reboot.
If the openQA needle match loop happens to kick in a millisecond
or whatever later, after the button is done transitioning, the
button is now a 100% match and the bug doesn't happen. This only
happens on Server because the left-hand side gradient differs in
each flavor, and only the Server one just happens to have a spot
which is nearly identical to the needle area.
So to avoid that, let's include a bit of the grey space next to
the button. This is a bit more fragile against GTK+ changes to
button design or padding or whatever, but it will at least avoid
the match issue.
The other option would be to try and hit the button with tab and
enter or something, I guess.
Test Plan:
bit hard since this is an intermittent bug, I guess
run install_default on a Server image a bunch of times and see if
it always works.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D824
according to rdieter the runner dialog could be white or grey
background, we should match on either. One is probably a bug
but it's best to just work with it. Removing the February
version without the 'search' text.
Summary:
Rawhide currently seems to have a bug in spell check dictionary
load, which causes the test to fail as it requires another Done
click. So add a workaround needle that handles this case.
Test Plan:
Apply the patch, run some tests, see if they work. I
did a test run on staging:
https://openqa.stg.fedoraproject.org/tests/13331
Reviewers: garretraziel, jskladan
Reviewed By: jskladan
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D815
Summary:
per details in T759, the 'unipony' updates image we use to test
the updates image features doesn't work with latest anaconda (f24
and Rawhide). I've built a new updates image which uses a neat
anaconda feature that allows you to override CSS with a file in
a special location; it sets the background for disk capacity
texts on the INSTALLATION DESTINATION spoke to be pink. This
lets us use a simple needle that just looks for a pink blob on
that spoke, on the basis that it's unlikely there'll ever be a
pink blob there for any other reason, so if there is one, the
updates image worked. There will be an accompanying tools diff
to change the updates disk image to use the new updates image.
Test Plan:
Do a test run and check the updates image tests pass
and no other tests are broken. You'll need to pull in the tools
diff and re-generate the updates disk image to check that test,
the scsi_updates_img test should work with just this diff.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D799
Some needle changes to account for latest Rawhide. There seems
to be a bug between anaconda and GTK+ 3.20 causing text in the
disk selection widget not to be styled correctly: this commit
adds needles for that which are tagged as 'workaround', meaning
openQA will complete the tests but mark them as requiring a
workaround to work ('soft fail'). The bug is #1322036. There is
also an intentional change to the volume list in custom part;
the mount point names are now in dark grey rather than black (in
fact this has always been intended, but it's been broken for a
long time, according to davidshea). I cleaned up the part select
needles at the same time; the new ones have the non-variant
names, as davidshea says the same change is coming to F24 and
the original needles haven't matched for months. The F23 Atomic
install test doesn't hit any of these needles, so we don't need
to keep the original needles around for that. The most recent
variants are kept, as they'll be needed for F24 tests until the
new anaconda build goes stable for F24. The 'freetype262'
variant of part_select_swap hasn't matched for two months and is
dropped.
Summary:
First off, this revises the anaconda crash handling needles a
bit. We ditch gtk3195 and update anaconda_error to reflect
current F24/Rawhide. We keep the old anaconda_error around for
now as anaconda_error-23, to handle crashes in the F23 two-week
Atomic nightlies. We also add an 'early' variant, which is for
when (I think) the installer crashes very early, before it's
loaded in GTK+ settings; when that happens, the dialog uses a
different font. The screenshot comes from a recent Rawhide test
that crashed.
We also restore the anaconda `post_fail_hook` code to click
the Report button when a crash happens. This was erroneously
removed in D637. Before the Report button is clicked, the
`anaconda-tb` file exists but the libreport stuff in `/var/tmp`
does not. By removing this, we lost the libreport bits from
the uploaded files, which makes it harder to report crashes. So
let's add it back.
Finally we fix the actual tarring and uploading of `/var/tmp`;
also in D637 this got broken because it was being tarred up in
whatever directory the commands happened to be running in, but
we were still trying to upload it from `/var/tmp`.
https://openqa.stg.fedoraproject.org/tests/8444 was run with
these changes, and has `/var/tmp` correctly uploaded.
Test Plan:
Run some test that crashes, make sure the crash
handling all works correctly.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D768
GTK+ 3.19.10(?) has changed things in current F24/Rawhide;
weirdly, done-freetype262 seems to match sometimes but not
always. Add a new needle from a current screenshot but keep
freetype262 around for now just in case. Drop some variants
that should never be needed any more, rename the original
needle to -23 to mark that we're only keeping it around for
the F23 two-week Atomic tests. For now keep french-cantarell20
as the 'official' French needle, we'll see if it hits any
failures when the tests are working a bit better.
mostly cantarell changes. GTK+ changes are bugs, so put 'bug'
in the name to remind us of this. There's one non-typical
change, to main_hub_installation_source; I removed the match
on the text label of the spoke entirely instead of updating it,
in line with other similar needles, it's unnecessary and only
serves to make the needle more fragile.
3.19.5 seems to change the colors of buttons slightly and also
the rendering of checkboxes/radio buttons, they're now placed
somewhat differently relative to their labels.
garretraziel took these with F23, I think. Theoretically we
could just have these ones and ditch his, as we're not running
KDE install tests on F23, but we might want to discuss that kind
of question more generally, so for now let's just add the
variant.
We may need more variants for the post-install matches, but the
test doesn't actually get that far ATM because of dependency
issues in the KDE package set, so I'll deal with that once we
can actually do a successful KDE install.
Summary:
As I figured out a while back, the seabios firmware font is
nearly the same as our console font (eurlatgr) but not quite,
significantly its @ character is different (shorter). We
already have a root_logged_in variant for the firmware font,
but we now need one for user_logged_in as well. The Atomic
installer image has had the Linux console fonts stripped from
its payload, so it's now using the firmware font, and user_
logged_in isn't matching - see
https://openqa.fedoraproject.org/tests/461 .
Test Plan:
Run the cloud_atomic_canned test (on an F23
post-release nightly, as it's not appearing for Rawhide
nightlies ATM) and confirm it now passes.
Reviewers: garretraziel, jskladan
Reviewed By: jskladan
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D684
add KDE package set testcase - this only adds needles and
new testcase configuration, because with needles cleanup from D670,
it should work without change in code.
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D673
Let's use the same principle with DESKTOP tag as we use with
LANGUAGE tag. Where there are any GNOME-only (or KDE-only) needles, tag
them with `DESKTOP-gnome` and delete then when different `DESKTOP` value
is specified. This will help with `QA:Testcase_Package_Sets_KDE_Package_Install`
testcase - we will be able to use almost the same code and check that KDE
got installed properly.
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D670
