We do this slightly differently on KDE and GNOME for whatever
reason, so this needle needs updating too.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
LibreOffice adjusted layout a bit and dropped a template, one
icon changed in the utilities menu compilation.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Arabic doesn't match the English needle even though it's not
translated, because it's RTL, so the radio button is on the
other side of the text.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The screen is not translated in any language yet, so let's just
make the needle language-independent at least for now. We could
change this after translations show up.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This often seems to get a 90-95% match for some reason. Let's
just drop the threshold. I think it may be a kerning difference
based on the width of the MAC address?
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Really this just boils down to needing an extra click. We can
even just do the click in the old UI as well, it's not needed
but won't hurt anything and keeps the code simple.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
See https://github.com/cockpit-project/cockpit/issues/16243 .
This is a fairly minor issue upstream knows about but will not
be fixed immediately, so we'll add a workaround for it for now.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
As suggested by @kparal, this adds a test that specifies an
additional repository using a metalink. The repository contains
a single package, 'testpackage', that supplements glibc (so it
should always get installed). The test runs an install then
checks that testpackage got installed.
We also deduplicate a pair of needles which were matching on the
same anaconda UI feature (an "add" button) and use that same
needle in this test.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This also requires a new needle for accounts.fedoraproject.org, as the webpage
is completely different now. The old needle for browser_fas_home is obsolete via
this change and can be removed
Remove a whole chunk of needles that haven't matched for more
than 3 months. Also move a few needles to appropriate locations,
simplify some code chunks that relied on removed needles (if
we're not matching the needles, we don't need those chunks any
more), and drop some other no-longer-needed conditionals for
older releases.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
As of today's Rawhide, KDE seems to be using a different icon
theme for anaconda. Not sure if this is intentional or not, but
we need to cope with it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This adds a test for fingerprint-based login, as requested by
@benzea in #223. We use the fprintd dummy device to let us
simulate scanning a fingerprint, and check various scenarios
recommended by @benzea.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Now we have two areas, openQA wants to click in the wrong one.
Let's tell it which one to click in.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The main screen now also has identical "Japanese" (that's what it
says) text. To avoid false matching before the picker opens, add
another match area.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The open dialog on Silverblue (which is apparently not at all
the same thing as the open dialog on Workstation, though they
look the same) does not default to the Documents folder, so we
have to open it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
These all failed to match first time the test was run in
production. I guess Lukas was working from an older release.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR fixes issue #188. It adds a test suite to test basic
functionality of Evince and brings the following features:
* test scripts for various Evince functions.
* needles to support the Evince test scripts
* new template variables `TESTPATH` and `POSTINSTALL_LOAD_ALL` (see
below)
* new logic in `main.py` (see below)
The new variables and the new logic make it easier to create test
suites for post-installation tests. If TESTPATH is used, OpenQA
will take all tests mentioned in POSTINSTALL from that specified
TESTPATH. If both TESTPATH and POSTINSTALL_LOAD_ALL are used, then
OpenQA will run all tests it can find at the TESTPATH location.
If POSTINSTALL and POSTINSTALL_LOAD_ALL are set simultaneously,
then only POSTINSTALL will be taken into account and OpenQA will
only load tests mentioned there.
Recent git os-autoinst no longer downsamples screenshots as far
as it did before comparison. This makes a lot of needles where
colors have changed slightly no longer match, so they all needed
updating.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Again, to combat os-autoinst's new behaviour without adding yet
more needles. We're getting 96% match on stg.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Also delete ones for F32 and earlier. This should hopefully help
us not need to have too many needles for the newer stricter
matching.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Latest Firefox has moved the underline down slightly for some
dumb reason. This tweaks the match area to only the text, so it
matches wherever the underline is.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In #235 we accidentally included an entire disks.pm test that
wasn't meant to be there - the infocenter module test is the
right thing to exercise plasma-disks, there is no standalone
app, running 'disks' just gets you the KDE Partition Manager,
which we already test. So this removes that test and renames a
needle that looks like it's for that test but is actually for
the kinfocenter module, to make this clearer.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR adds a new test that automates the above mentioned test case.
It starts the installation in text mode using the `install_text` test
case, which it interrupts using the Anaconda crash trigger.
When the crash happens, it goes through the process of reporting
the bug to Bugzilla, checks that Bugzilla sends a positive
confirmation of the action, but also performs some REST API
calls to do a proper check and then it closes the bug to clean up.
GNOME dropped the g-i-s new user mode in F34, so on a Japanese
install with user created in the installer, you don't get an
input source configured out of the box or on first boot. So
we'll just have to do it manually after booting, before we test
if it works.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Looks like the latest Rawhide got a permanent update notification
for KDE again. F34 is still around, though, so we can't just
revert to the old code, I don't think.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The 'desktop_pacakge_tool_update-kde-detected' needles and
'desktop_update_notification_systray-kde' needles are actually
matching on exactly the same thing, so drop the redundancy. We
need to have the desktop_package_tool_update tag on the older
(F33) version of this needle because on F33 we click on it to
launch the update tool in the desktop_update_graphical test; from
F34 onwards this is *not* what we want to do so the needle should
not have that tag to avoid throwing the test off. When F33 goes
EOL we can drop that tag from the needle and simplify the
destop_update_graphical test. Also add a needle for the Discover
app's 'update' icon when no updates are found.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's some cheating/sloppiness going on here, with the same tag
and sometimes same needle being used to match "LVM2 Volume Group"
and "LVM2 Logical Volume". Today this caused us to pick the thin
pool entry instead in a test, so let's just clean this up and do
it right, with separate needles for matching each thing.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The needle match seems to have changed when bug #1957858 showed
up, but it's actually just a text rendering change in the window
title, it's not exactly caused by the tiny window. So not marking
as a workaround needle.
Maximizing the window makes the test work faster when we hit that
bug, as type_safely needs to be able to see the results of its
typing.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Some fixups for anaconda_help. Two runs of it failed today around
handoff from the root password screen to the install progress
screen; add a couple of wait_still_screens there to make it
safer. Drop the added nonlive needles, because they're too
permissive, causing problems for other tests (they're matching
before they should); instead we solve the problem of spokes being
highlighted by just pressing shift-tab a few times. And fix some
tabs to be spaces.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR automates the mentioned testcase to test that Help can be
displayed in Anaconda during the installation. It navigates through
the available Help screens and if it can see it, it finishes.
This test runs after `install_default_upload` to override the
installation defaults defined for all primary tests.
Delete a duplicated needle.
Reformat list extensions to make it nicer.
Get rid of wrong export and an empty line.
Delete empty line.
Use _boot_to_anaconda for booting and move subroutine accordingly.
Add variable to templates.fif.json
Delete trailing whitespace.
Fix calling the pretest.
Move help checking to another place.
Not sure why these changed, but oh well. Utilities menu was
highlighted in a test run for some reason, so let's just handle
that. Other needles changed very slightly.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We're not using them, so they fail the unused needles check. We
can just revert this commit when we want them back.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The background color of the generic left bar needle has changed
to match the new logo base color. The top bar's background color
has similarly changed, but this also caused us to notice a bug
in fedora-logos - that topbar image file seems to be basically
empty (just a transparent rectangle) so we see no 'image' in the
top bar, just solid electric blue. This needle matches that.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Boxes dropped VNC functionality. It's supposed to be replaced by
Connections, but we can't use that until it has fullscreen:
https://gitlab.gnome.org/GNOME/connections/-/issues/5
so use Vinagre for now. We do also prepare some needles for
Connections in anticipation of being able to use it later (since
I already did the work and don't want to waste it...)
Signed-off-by: Adam Williamson <awilliam@redhat.com>
OK, so sometimes we have a Reboot button, sometimes a Restart
button, sometimes both, but never *always* one or the other. So
we need both needles. Sigh.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's a spurious warning on the Updates page, but we don't
want to fail tests for non-related updates on that, and I've
already reported it so it should get fixed.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The 'reboot' button isn't always there in this case, it seems,
but the 'restart services' one is more likely to be. So let's
switch.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Stupid Firefox survey means the thing we usually check isn't
always on the screen. This one checks for PRIORITY.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
KDE switched to using Noto fonts by default (and title bars seem
to be blue again), many needles need to be updated.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
On current F34 we get no permanent update notification in the
notifications view, we only get a *transient* one plus the
systray icon. This tweaks things so on F34 we check both of
those things correctly, behaviour on <F34 should be unchanged.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This dialog gets cut off sometimes, it seems. That's a bug, but
we just want to handle it, because we want to quit cleanly.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
KDE update was still often failing on #1943943, so this tries a
bit harder to work around it. We add a 'refresh' needle for KDE,
and tweak the 'retry' logic to click it if we get to that point.
Note adding the needle also changes behaviour slightly - we may
click this needle if we see it on first entering the screen. So
either change may be helping. Either way, this does make the test
more reliable.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Design team tweaked the new logo a bit in anaconda. We probably
won't need the old needle any more, but I'll take that out later.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Some apps moved around, others the needles stopped matching for
some reason, some kind of slight scale change or something.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The package with the new logo is not submitted as an update yet,
but we ran the tests on the Koji build and these are the new
needles. We'll need more when we run the full set of compose
tests on the change.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
When we have to restart Cockpit during the update, we don't get
the usual "successful" screen after logging back in, we'll have
to match on something indicating an update did happen. I wanted
to use the little icon next to the package count but it seems to
have some kind of problem with anti-aliasing or something, I've
created two needles for it and neither matched on the next run
of the test. So let's match on this "reboot needed" text instead,
I hope it'll always be there when we hit this case.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Make the 'deactivate overview if it's active' thing a bit more
robust by asserting the inactive state after deactivating it,
and add new needles for the new RC (text got a bit brighter).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
For consistency, let's just return to the desktop right away. We
also need to handle closing the overview before running installer
on live image boot.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We worked around it in a different way (installing a Plymouth
theme in the base disk image) so these shouldn't be needed any
more.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's a bug in F34/Rawhide lately where the bootsplash isn't
fully cleared when displaying text consoles, this causes all the
login needles not to match. Add several workarounds to make the
most common cases at least work with the bug, failing on it is
not much use.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We need to hit 'restart' after applying updates, and we also
need the 'done' needle *not* to match the restart message, so
change that to match on the text (unfortunately). That also
means we have to add another variant of the needle for F32 as
the background of the text is a different color there.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR adds a test that uses the Blivet interface to create an LVM
layout with ext4 filesystem as well as a postinstall test that checks
that the LVM layout has been created correctly.
We finally saw a test where there were *no* errors logged by the
time Cockpit reached the log screen, so there were no entries to
click. Let's just make the test set log level to info before
looking for entries - I prefer this to 'click entry if found,
otherwise change log level' as that's twice as many branches to
look after. Of course, it means the warning triangle entry needle
is useless now :(
Signed-off-by: Adam Williamson <awilliam@redhat.com>
KDE in F34+ is now placing sleep, restart and shutdown buttons
right on the system menu, not in a submenu. So we need to sort of
tweak this logic. The approach here is: we count the GNOME
submenu as both a "power" and "leave" menu, so the needle to
enter it has both tags. KDE still has a "leave" submenu, but the
power options are not in a submenu any more, so the new "leave"
needle only has the leave tag, not the power tag. For "leave"
actions we just unconditionally expect the "leave" tag; for
power actions we first match on *either* the submenu tag (for
GNOME and earlier KDE) *or* the action tag, click whatever we
found, and then if we matched the submenu (not the action), we
assert and click the action. After that all paths should be in
sync again and we can continue.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Cockpit 237 has misaligned radio buttons here. We know about the
issue and want the test to not fail on unrelated updates, so let's
make it a soft fail.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
