"Additional repositories" is now hidden behind a dropdown we
have to open first. This will make the test fail on anything
older than Fedora-Rawhide-20230121.n.0, but I don't think we
run this test anywhere that would be a problem.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The Rawhide 'accept fate' text seems to have lost its Japanese
translation for some reason (I think the string might have had
a terminating period removed). And in one test, the "Extract"
menu item in Archiver was pre-highlighted so the needle didn't
match. Not sure why, but this doesn't seem like a problem, so
let's just handle it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I think the reason the match failed is the pixels under the text
changed when the pre-release warning disappeared. We don't really
need a new needle, we just need to make the existing one less
tall so no part of the text underneath is included.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
From anaconda-37.12.1, anaconda defaults to GPT for all BIOS
installs. So we need to create a BIOS boot partition when doing
a BIOS install. I think all other potential configs (x86_64
UEFI, aarch64 (UEFI), ppc64le (OFW)) are covered under the other
two paths, so just making this `else` should be OK.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I think the change here is the new version of noto fonts. GNOME
uses adwaita so it's not affected.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Same difference as for English - 4 pixels of padding was added.
Also move a stray Russian needle to the right directory.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We get these variant needles with the keyboard icon and layout
name at slightly different relative vertical positions every
time we do a Final RC. I think the layout is affected by the
pre-release warning text no longer being present. Usually each
cycle something changes with the icon or with font rendering,
so the needles have to be updated, as in this case.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We very rarely see this needle - only when we run the 'generic'
tests on an Everything image instead of a Server one, which
will usually only happen if we trigger it manually. I did this
recently to test an anaconda update, and found it needs an
update.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I do not know what's going on with this quit button and why it
seems to keep showing up looking different. Today it looks
different in the same image (KDE live) from the same compose
(today's Rawhide) on prod and stg openQA. I've no idea how that
is possible, but oh well, let's keep adding needles till the
pain stops.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The last line of text is slightly cut off on KDE lives, so shrink
this needle area so it still matches.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
One of the icons showed up bigger in a UEFI test. I dunno why.
Just keep adding needles till the pain stops.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
GNOME 42 and adwaita-icon-theme 42 changed a lot of things in
GNOME and anaconda, we need to update all these needles.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The help test had its own needle for the user creation link,
but we already have an existing one. We should probably re-
arrange all the needles that are in 'install_process' now the
root and user creation spokes are moved to the main hub, but
that's a big change so I'll do it separately. This just removes
the duplicate needle and tweaks some match names.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It does not need to include any of the language specific text,
I guess Lukas included it in the English needle because it was
based on the IoT needle which is wider. So just shrink it to
not include any language specific text and drop the variants.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
IoT says "FEDORA-IOT" here, not just "FEDORA", and the greyspace
at the right-hand side was making the match fail. Not sure why
this only just started being a problem, but oh well, let's
make it a bit smaller.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The text line we matched on before changed and is currently
untranslated, let's match on a different line.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
I forgot to update the language tags in the 'untranslated'
needles when copying them from the English one.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
As of today's Rawhide compose, user accounts added in Rawhide
have admin privs by default. For now we need to handle both
possibilities here (click the box if it's not clicked already);
after F35 EOL we can just drop all handling of that box.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
KDE team inform me they fixed a bug in Rawhide which made grey
not quite grey enough. Now it's greyer. So, more needles. So
many needles.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This seems to happen every cycle: when we get to testing an
RC, the layout indicators in anaconda move a bit (the text
moves relative to the little keyboard icon). I think the fact
that the prerelease text is no longer present is what causes
this. Anyway, we need to handle it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The Japanese "accept your fate" button changed slightly, and
the new root password screen got a French translation.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Some changes were made in the icon theme used by the installer
and GNOME, update various needles for this.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The other tag the Help test uses is created by a concatenation
that isn't easy to change, so just add the tag to the other needle.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Arabic doesn't match the English needle even though it's not
translated, because it's RTL, so the radio button is on the
other side of the text.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The screen is not translated in any language yet, so let's just
make the needle language-independent at least for now. We could
change this after translations show up.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Really this just boils down to needing an extra click. We can
even just do the click in the old UI as well, it's not needed
but won't hurt anything and keeps the code simple.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
As suggested by @kparal, this adds a test that specifies an
additional repository using a metalink. The repository contains
a single package, 'testpackage', that supplements glibc (so it
should always get installed). The test runs an install then
checks that testpackage got installed.
We also deduplicate a pair of needles which were matching on the
same anaconda UI feature (an "add" button) and use that same
needle in this test.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Remove a whole chunk of needles that haven't matched for more
than 3 months. Also move a few needles to appropriate locations,
simplify some code chunks that relied on removed needles (if
we're not matching the needles, we don't need those chunks any
more), and drop some other no-longer-needed conditionals for
older releases.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
As of today's Rawhide, KDE seems to be using a different icon
theme for anaconda. Not sure if this is intentional or not, but
we need to cope with it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Recent git os-autoinst no longer downsamples screenshots as far
as it did before comparison. This makes a lot of needles where
colors have changed slightly no longer match, so they all needed
updating.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR adds a new test that automates the above mentioned test case.
It starts the installation in text mode using the `install_text` test
case, which it interrupts using the Anaconda crash trigger.
When the crash happens, it goes through the process of reporting
the bug to Bugzilla, checks that Bugzilla sends a positive
confirmation of the action, but also performs some REST API
calls to do a proper check and then it closes the bug to clean up.
There's some cheating/sloppiness going on here, with the same tag
and sometimes same needle being used to match "LVM2 Volume Group"
and "LVM2 Logical Volume". Today this caused us to pick the thin
pool entry instead in a test, so let's just clean this up and do
it right, with separate needles for matching each thing.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Some fixups for anaconda_help. Two runs of it failed today around
handoff from the root password screen to the install progress
screen; add a couple of wait_still_screens there to make it
safer. Drop the added nonlive needles, because they're too
permissive, causing problems for other tests (they're matching
before they should); instead we solve the problem of spokes being
highlighted by just pressing shift-tab a few times. And fix some
tabs to be spaces.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR automates the mentioned testcase to test that Help can be
displayed in Anaconda during the installation. It navigates through
the available Help screens and if it can see it, it finishes.
This test runs after `install_default_upload` to override the
installation defaults defined for all primary tests.
Delete a duplicated needle.
Reformat list extensions to make it nicer.
Get rid of wrong export and an empty line.
Delete empty line.
Use _boot_to_anaconda for booting and move subroutine accordingly.
Add variable to templates.fif.json
Delete trailing whitespace.
Fix calling the pretest.
Move help checking to another place.
We're not using them, so they fail the unused needles check. We
can just revert this commit when we want them back.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The background color of the generic left bar needle has changed
to match the new logo base color. The top bar's background color
has similarly changed, but this also caused us to notice a bug
in fedora-logos - that topbar image file seems to be basically
empty (just a transparent rectangle) so we see no 'image' in the
top bar, just solid electric blue. This needle matches that.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Boxes dropped VNC functionality. It's supposed to be replaced by
Connections, but we can't use that until it has fullscreen:
https://gitlab.gnome.org/GNOME/connections/-/issues/5
so use Vinagre for now. We do also prepare some needles for
Connections in anticipation of being able to use it later (since
I already did the work and don't want to waste it...)
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Design team tweaked the new logo a bit in anaconda. We probably
won't need the old needle any more, but I'll take that out later.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The package with the new logo is not submitted as an update yet,
but we ran the tests on the Koji build and these are the new
needles. We'll need more when we run the full set of compose
tests on the change.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR adds a test that uses the Blivet interface to create an LVM
layout with ext4 filesystem as well as a postinstall test that checks
that the LVM layout has been created correctly.
This PR uses the Anaconda Blivet partitioning to recreate a partition
layout while preserving the content of the /home subvolume.
It also adds the postinstall test to check that the home has been
preserved.
