The way this currently works, the test unconditionally waits 60
seconds for the "Timbuktu screen" (the warning dialog shown on
pre-release images) to appear when anaconda is starting up, even
if it's testing an image where it doesn't show up. Now we test
Atomic nightlies and live respins and stuff this happens quite a
lot, so let's avoid it. This way if the hub appears during those
60 seconds we'll spot it right away and continue, otherwise we
behave the same as before.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Upstream is gonna change the default from 30 to 0, it seems:
https://github.com/os-autoinst/os-autoinst/pull/965
so let's go ahead and change these two cases where we have no
explicit timeout to have one.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The reason we have all this horrible code to use the commented-
out baseurl lines in the repo files instead of the metalinks
that are usually used is a timing issue with the metalink
system. As a protection against stale mirrors, the metalink
system sends the package manager a list of mirrors *and a list
of recent checksums for the repo metadata*. The package manager
goes out and gets the metadata from the first mirror on the
list, then checksums it; if the checksum isn't on the list of
checksums it got from mirrormanager, it assumes that means the
mirror is stale, and tries the next on the list instead.
The problem is that MM's list of checksums is currently only
updated once an hour (by a cron job). So we kept running into
a problem where, when a test ran just after one of the repos
had been regenerated, the infra mirror it's supposed to use
would be rejected because the checksum wasn't on the list - but
not because the mirror was stale, but because it was too fresh,
it had got the new packages and metadata but mirrormanager's
list of checksums hadn't been updated to include the checksum
for the latest metadata.
All this baseurl munging code was getting ridiculous, though,
what with the tests getting more complicated and errors showing
up in the actual repo files and stuff. It occurred to me that
instead of using the baseurl we can just use the 'mirrorlist'
system instead of 'metalink'. mirrorlist is the dumber, older
system which just provides the package manager a list of mirrors
and nothing else - the whole stale-mirror-detection-checksum
thing does not happen with mirrorlists, the package manager just
tries all the mirrors in order and uses the first that works.
And happily, it's very easy to convert the metalink URLs into
mirrorlist URLs, and it saves all that faffing around trying to
fix up baseurls.
Also, adjust upgrade_boot to do the s/metalink/mirrorlist/
substitution, so upgrade tests don't run into the timing issue
in the steps before the main repo_setup run is done by
upgrade_run, and adjust repo_setup_compose to sub this line out
later.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Sometimes rebooting during upgrade tests seems to take longer
than these timeouts allow, so let's bump them a bit.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The text changed from 'added repo' to 'enabled repo' in Rawhide
after F28, so let's handle both at least till F28 is EOL.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We've been seeing an odd case lately where the language select
screen is not foregrounded when it appears (so all text is
grey). It happens very occasionally on x86_64, but a lot on
ppc64. To work around this, let's add a needle that matches the
inactive screen, and click on the screen when it appears just
to make sure it's active.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We do the 'desktop update' test for KDE via the notification
icon thingy, and it behaves differently depending on whether it
has already detected there are updates or not. The test only
works at present in the case where it *hasn't* - it expects the
notification icon to be in the extended panel and it expects to
see a 'refresh' button, neither of which is the case if it's
already noticed there are updates to install.
We should also force PackageKit to update its list of available
updates after we set up our 'special' update, otherwise on this
path KDE will only install the updates it found *before* we did
our stuff, and the test will fail as our special update won't be
there.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In F28 tests, the notification 'counter' thing that we rely on
to check there's only *one* notification seems to suddenly
disappear...right around 10 minutes after the desktop starts up,
which is just how long our test idles for to catch crashes that
happen a little after boot. That causes test fails. Let's try
just cutting the wait down to 8 minutes to see if that helps.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
KDE in F28+ seems to show a network connection notification on
live boot, for some reason. Just dismiss it to help the test
pass.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This test expects to pick up from freeipa_webui, but that test
is not fatal (i.e. it can fail and we still carry on to this
one). We should probably make them independent, but for now,
just check if 'test3' (one of the users freeipa_webui creates
and that this test requires) actually exists, at the start. If
not, we can just die right away.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This reduces duplication, but it also means that if the FreeIPA
web UI module fails, the password change module will pick up
from a point where Firefox is set up and won't fail in a bogus
way because it isn't.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This mouse placement is in the middle of where the 'install
addon' popover appears in Firefox, and that seems like it
sometimes causes the popover to immediately disappear in KDE.
This is pretty corner-case-y so I don't wanna report it as a
bug, let's just tweak the cursor hiding location and see if it
solves the problem.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
...as somehow a Workstation live install currently has the
desktop on tty3, I have no idea why (g-i-s not quitting right?)
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is the best workaround I can think of for RHBZ #1553807 -
just check (in the 60 second 'move the mouse' loop) if anaconda
is still running, based on whether its icon is in the top bar
(on Workstation live installs only, obviously).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Seems with the long period of not doing anything and possibly
with very aggressive timeouts in Fedora 28, Workstation live
wants to blank the screen while we're installing. Stop it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Previous approach wouldn't work for tests that run after the
install test...let's just set a password from a chroot after
install completes. Don't really like this as it changes the
'real' install process a bit, but it's the least invasive short
term fix at least. We can maybe do something more sudo-y later
with a bit more thought.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Workstation live installs for F28+ drop the user creation and
root password panes from anaconda, so we need to not try and
use them any more. But we still want the old behaviour for F27.
I'm hoping this approach will work, if not, we'll find out soon
enough. This removes the install_no_user test for F28+ as it
will no longer differ from the install_default test.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This adds a check that the default package set selection is
actually correct, where possible and appropriate, as part of
the `_software_selection` test. We do this by examining the
`packaging.log` log file and checking which environment group
was selected.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is currently broken, but openQA doesn't notice; we really
should. We could also check the default in other cases, but I
think that's less clear-cut, as it's kind of an anaconda design
choice, it's not mandated in Fedora requirements anywhere.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's a problem with using `--releasever=rawhide` for upgrade
tests ATM - see #1531356 . To avoid this, we'll try using the
real Rawhide release number (which I'm adapting the scheduler
code to discover and pass in as `RAWREL`).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
There's a bug causing the 'getting started' screen to crash.
This doesn't really make the system unusable, so treating it
as a soft failure seems appropriate, especially as this will
unblock all the post-install tests on Workstation.
