It's not just Installation Destination, on aarch64 at least we
have lots of tests failing because entering the source or software
selection spokes didn't work. Let's try extra clicks for these
too.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Anaconda has dropped the ability to interactively configure
additional repositories, so this test cannot work any more.
It's now possible only with inst.addrepo or a kickstart.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
"Additional repositories" is now hidden behind a dropdown we
have to open first. This will make the test fail on anything
older than Fedora-Rawhide-20230121.n.0, but I don't think we
run this test anywhere that would be a problem.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
As suggested by @kparal, this adds a test that specifies an
additional repository using a metalink. The repository contains
a single package, 'testpackage', that supplements glibc (so it
should always get installed). The test runs an install then
checks that testpackage got installed.
We also deduplicate a pair of needles which were matching on the
same anaconda UI feature (an "add" button) and use that same
needle in this test.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Remove a whole chunk of needles that haven't matched for more
than 3 months. Also move a few needles to appropriate locations,
simplify some code chunks that relied on removed needles (if
we're not matching the needles, we don't need those chunks any
more), and drop some other no-longer-needed conditionals for
older releases.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It's not really a good idea to have the comments that explain
the test_flags in *every* test, because they can go stale and
then we either have to live with them being old or update them
all. Like, now. So let's just take 'em all out. There's always
a reference in the openQA and os-autoinst docs, and those get
updated faster.
More importantly, add the new `ignore_failure` flag to relevant
tests - all the tests that don't have the 'important' or
'fatal' flag at present. Upstream killed the 'important' flag
(making all tests 'important' by default), I got it replaced
with the 'ignore_failure' flag, we now need to explicitly mark
all modules we want the 'ignore_failure' behaviour for.
Summary:
This adds a couple of new exporter modules, renames main_common
to utils (this is a better name: openSUSE's main_common is
functions used in main.pm, utils is what they call their module
full of miscellaneous commonly-used functions), and moves a
bunch of utility functions that were previously needlessly
implemented as instance methods in base classes into the
exporter modules. That means we can get rid of all the annoying
$self-> syntax for calling them.
We get rid of `fedorabase` entirely, as it's no longer useful
for anything. Other base classes keep the 'standard' methods
(like `post_fail_hook`) and methods which actually need to be
methods (like `root_console`, whose behaviour is different in
anacondatest and installedtest).
Test Plan:
Do a full test suite run and check everything lines
up. There should be no functional differences from before at all,
this is just a re-org.
Reviewers: jskladan, garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Reviewed By: garretraziel_but_actually_jsedlak_who_uses_stupid_nicknames
Subscribers: tflink
Differential Revision: https://phab.qa.fedoraproject.org/D1080
Summary:
the main thing this does is try and type slower in X - this
should cover nearly everywhere we type anything in X, and make
it type slower. We also add a bit more safety checking to some
old tests which didn't have it (mainly _do_install_and_reboot)
- wait_still_screen after typing to make sure all the keypresses
were registered before continuing.
This is an attempt to mitigate the problems we've seen where
the wrong text gets typed into the wrong places and the tests
break.
This branch is live on staging atm. It still has *some* issues,
but I do think it's an improvement.
Test Plan:
run the tests (probably several times), compare to
runs without the change, see if it's better or worse...
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D993
I assumed the 'compose location' sent by fedmsg was https, but
in fact it's http (you get redirected to https when you access
it). Could just change the default back to 4, but why not make
it properly robust. Sending without review so this doesn't go
wrong all weekend.
Summary:
we have a long-standing problem with all the tests that hit
the repositories. The tests are triggered as soon as a compose
completes. At this point in time, the compose is not synced to
the mirrors, where the default 'fedora' repo definition looks;
the sync happens after the compose completes, and there is also
a metadata sync step that must happen after *that* before any
operation that uses the 'fedora' repository definition will
actually use the packages from the new compose. Thus all net
install tests and tests that installed packages have been
effectively testing the previous compose, not the current one.
We have some thoughts about how to fix this 'properly' (such
that the openQA tests wouldn't have to do anything special,
but their 'fedora' repository would somehow reflect the compose
under test), but none of them is in place right now or likely
to happen in the short term, so in the mean time this should
deal with most of the issues. With this change, everything but
the default_install tests for the netinst images should use
the compose-under-test's Everything tree instead of the 'fedora'
repository, and thus should install and test the correct
packages.
This relies on a corresponding change to openqa_fedora_tools
to set the LOCATION openQA setting (which is simply the base
location of the compose under test).
Test Plan:
Do a full test run, check (as far as you can) tests run sensibly
and use appropriate repositories.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D989
Summary:
Set up the support server to provide DHCP/DNS functionality and
an NFS server, providing a kickstart. Add a kickstart test just
like the other root-user-crypted-net kickstart tests except it
gets the kickstart from the support server via NFS. Also add NFS
repository tests and a second support server for Server-dvd-iso
flavor: this test must run on that flavor to ensure that packages
are actually available. The support server just mounts the
attached 'DVD' and exports it via NFS.
Note we don't need to do anything clever to avoid IP conflicts
between the two support servers, because os-autoinst-openvswitch
ensures each worker group is on its own VLAN.
As part of adding the NFS repo tests, I did a bit of cleanup,
moving little things we were repeating a lot into anacondatest,
and sharing the 'check if the repo was used' logic between all
the tests (by making it into a test step that's loaded for all
of them). I also simplified the 'was repo used' checks a bit,
it seems silly to run a 'grep' command inside the VM then have
os-autoinst do a grep on the output (which is effectively what
we were doing before), instead we'll just use a single grep
within the VM, and clean up the messy quoting/escaping a bit.
Test Plan:
Run all tests - at least all repository tests - and
check they work (make sure the tests are actually still sane,
not just that they pass). I've done runs of all the repo tests
and they look good to me, but please double-check. I'm currently
re-running the whole 24-20160609.n.0 test on staging with these
changes.
Reviewers: jskladan, garretraziel
Reviewed By: garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D888
With the arrival of Pungi 4, the scheduler is no longer using
fedfind-provided BUILD and FLAVOR values, but ones derived from
Pungi properties. BUILD is now simply the Pungi compose_id.
FLAVOR is produced by joining the Pungi variant, type, and
format with '-' characters as the separators.
Pungi, unfortunately, does not treat 'Rawhide' as a release, it
synthesizes a release number for Rawhide composes and places
that in the compose ID. To cope with that, for now, the
scheduler will set RAWHIDE to '1' if the compose is a Rawhide
one. As we have to adapt all places where we parse the release
in any case, this commit consolidates them into a fedorabase
subroutine.
For the one place where we also used to parse the 'milestone'
from fedfind, there is a placeholder get_milestone subroutine
which currently returns an empty string, as I don't yet have a
good handle on how to draw the kinds of distinctions fedfind
mapped to 'milestone' from Pungi metadata.
Summary:
Root console in anaconda got broken by RHBZ #1222413 - no
shell on tty2. Decided to clean up console use in general as
part of fixing it.
This creates a class 'fedorabase' and has 'anacondalog' and
'fedoralog' both inherit from it. boot_to_login_screen is
moved there (as it seems appropriate) and it has a new
method, console_login, which basically handles 'get me a
shell on a console': if we're already at one it returns,
if not it'll type the user name and the password *if
necessary* (sometimes it's not) and return once it sees a
prompt. It takes a hash of named parameters for user,
password and 'check', which is whether it should die if it
fails to reach a console or not (some users don't want it
to).
anacondalog and fedoralog both get 'root_console' methods
which do something appropriate and then call
console_login; both have a hash of named parameters,
anacondalog's version only bothers with 'check', while
fedoralog's also accepts 'tty' to pick the tty to use.
This also adjusts all things which try to get to a console
prompt to use either root_console or console_login as
appropriate.
It also tweaks the needle tags a bit, drops some unneeded
needles, and adds a new 'user console prompt' needle; we
really just need two versions of the root prompt needle
and two of the user prompt needle (one for <F23, one for
F23+ - the console font changed in F23, and the @ character
at least doesn't match between the two). I think we still
need the <F23 case for upgrade tests, for now.
Test Plan:
Do a full test run and see that more tests
succeed. I've done a run on happyassassin with a hack to
workaround the SELinux issue for interactive installs,
and the results look good. I also fiddled about a bit to
test some different cases, like forcing a failure in a
live test to test post_fail_hook (and hence root_console)
in that scenario, and forcing failures after some console
commands had been run to check that it DTRT when we've
already reached a console, etc.
Reviewers: jskladan, garretraziel
Reviewed By: jskladan, garretraziel
Subscribers: tflink
Differential Revision: https://phab.qadevel.cloud.fedoraproject.org/D462
