This comes from trying to fix the annoying recurring problem with
mistypes in KDE which has been going on since at least December.
First, we add the attempt to kind of 'precache' the kicker menu
in aasetting.pm. Then, I thought, all this snapshot loading has
to be putting a lot of load on the workers. And when each subtest
passes, it shouldn't really be necessary - they all end with
quit_with_shortcut(), which verifies that the app exited and we
got back to a blank desktop, so successful subtests should not
usually interfere with each other. We probably only want to
rollback on *failed* subtests, which is in fact openQA's default
behavior. If any specific tests change the system state such that
later tests might be affected, we can go back and just set those
tests as always_rollback, but I think it should be safe to skip
rollbacks on success for most of them.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Various changes to the Tour text needed needle updates. The
final screen doesn't say "Have a nice day!" any more, so let's
rename that needle.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Since 46, the 1 minute button is a quickstart, it doesn't just
set the timer but starts it. So we can't always expect to have
to click the start button. Let's keep it working both ways for
now for respin testing, we can drop it once we're sure we're not
doing any testing on F39 any more.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This PR partly solves the issue #301 when it adds the navigation
testing for Gnome. It uses the keyboard combinations to cycle through
running applications and checks that applications could be switched
accordingly. It also tests that you can switch between workspaces
and that you can move an applications to another workspace.
This essentially inverts the x86_64 machines so that '64bit' is
UEFI and instead of a variant 'uefi' machine we have a variant
'bios' machine that is BIOS. The point is to make UEFI testing
the default. We also enable Secure Boot in the UEFI testing,
and add a test of UEFI fallback booting on various products.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Oops, all other actions pushes need to happen *before* the reboot
action push, or the logic breaks.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
My anaconda patch for ensuring we get an EFI boot manager entry
on installs using bootupd (currently only 'canned', i.e. Atomic,
installs - IoT and Atomic Desktops - are affected) was rejected
and dropped in the latest Rawhide build. It'll probably also be
lost in the next F40 build. So install tests of affected images
have started failing. This is a kinda awkward workaround: on
UEFI canned installs, we check whether it looks like there is no
"Fedora" efibootmgr entry, and if so, we delete the entry for the
optical drive, so hopefully we'll boot via fallback path from
the hard disk on reboot.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Whoops, we can't just use a straight match_has_tag there as we
did another assert in the middle...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Upstream now sets an alarm with no explicit recurrence inactive
after it is stopped (previously it assumed recurrence every day).
We need the test to handle both behaviours for a while (until
we are no longer testing < 46.0 anywhere).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We now have some images using bootupd, at least Fedora IoT images
from F40 onwards do. These don't have a /etc/default/grub and
don't really intend you to run grub2-mkconfig. As advised at
https://github.com/ostreedev/ostree/pull/3150#issuecomment-1998768240
let's just add our required arguments directly in the BLS snippet
files.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We changed to building toolbox container images with Kiwi. These
are OCI archives, not docker archives. So we need to call skopeo
appropriately.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Now we have F40 backgrounds, we can drop this exemption and have
the test always fail on non-Rawhide again.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is a workaround for
https://github.com/osbuild/images/issues/309 , the IoT installer
showing incomplete spokes in the main hub. We work around it by
visiting them all.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Anaconda has dropped the ability to interactively configure
additional repositories, so this test cannot work any more.
It's now possible only with inst.addrepo or a kickstart.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We stopped doing this on Server because it caused problems with
tests that use a disk image uploaded by another test, e.g. the
cockpit tests - they use the `/etc/fstab` from the disk image
the parent test uploaded, which says to mount the second disk as
/mnt/update_repo, but since this is a new test it has a fresh,
empty second disk with no filesystems to mount. This tries to
fix that by making _console_shutdown.pm edit that line back out
of /etc/fstab, so we can set NUMDISKS=2 again (also on the ostree
flavor, which had a similar problem with the overlay and rebase
tests using a disk image uploaded by the install test).
We need to fix this because FEDORA-2024-9b9da603e1 is so big
it causes the tests that don't use a scratch disk to run out of
disk space.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This test is failing a lot recently on KDE because when we try
to launch konsole immediately after returning from a console to
the desktop, it is mistyped and we get a browser instead. Let's
try a little sleep after the switch back in case KDE just needs
to settle down a bit.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
On Silverblue, Fonts cannot be started using the menu_launch_type
for the first time, or it starts and crashes immediately.
However, if Fonts are started with flatpak run org.gnome.font-viewer,
it seems that the application starts and holds.
Let's start it using this workaround and when it still crashes, let's restart.
per https://pagure.io/fedora-qa/issue/766 , this is a hole in our
current test approach: we are testing whatever the current
'stable' toolbox image is for the release, not the image that
is produced as part of the compose. This enhances the test to
test both, when possible. If the var TOOLBOX_IMAGE is set, we
will first check that a 'normal' `toolbox create` works - i.e.
that all the toolbox logic works right and it can actually find
a default image to download - but then we throw that toolbox
away, download the image (the value of the var is expected to
be a URL for the image file), register it with skopeo, and then
recreate the container using that image. Then we proceed with
the rest of the test as usual.
If TOOLBOX_IMAGE is not set, the test should proceed as before,
using the 'default' downloaded image.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We need to special-case the g-i-s update to get it stable before
we can actually change this in the real kickstarts repo...
Signed-off-by: Adam Williamson <awilliam@redhat.com>
these were duplicates. In GNOME 46-beta this dialog seems to be
in 'light mode' at least some of the time, so we'll keep the
'light mode' gnome_allow needle we added for Snapshot but
rename it and change its tags. We'll wipe the 'dark mode'
gnome_allow because it should be just the same as the existing
grant_access needle. The two tests that used gnome_allow are
changed to use grant_access.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The rpmostree_rebase test has been failing on CoreOS 40+ for a
while. Per
https://github.com/coreos/fedora-coreos-tracker/issues/1672
it turns out this is because FCOS actually deploys OCI remotes
by default now. Rebasing from an OCI remote to an ostree
remote (as we are trying to do here) requires specifying the
registry, so let's do that.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Creating the .invisible.txt file was done using non-assertion commands.
The tests have been failing for some and it seems like the commands
did not run correctly. Running them with assertions will make sure
that they will run (or fail correctly).
These loops make us click extremely fast. This may cause
unreliable results, I think. At least, the test is failing a
lot lately, with results that look like it's not always getting
the expected four levels of zoom. Let's try a short sleep
between clicks.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
It seems like the export screen takes a while to appear on 40 and
Rawhide ATM, and we might start typing before it's there. Let's
assert it's actually there before we start doing stuff.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In current F40 and Rawhide, this test is frequently failing
because gnome-software is behaving weirdly at startup - the
third-party software dialog moves around even more than before,
the app seems to get stuck in the "not responding" state
briefly sometimes, and there's a very weird state it gets into
sometimes where the window is shorter than usual and clicks
don't seem to register in the right place. While I'm trying to
bisect these bugs, these magic voodoo incantations (tested on
the staging instance) seem to mostly work around the weird
behaviour, and setting RETRY=2 should backstop it a bit further.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The place where repos are defined changed on the F40+ branches
of workstation-ostree-config, this handles both possibilities.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
GNOME Software seems to be doing some kind of animation between
the third party dialog and the main UI, and we're clicking on
a banner instead of the update button. Try a wait_still_screen
to deal with this.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Another bunch of these timed out. Not sure why. Maybe it's when
I run a lot of them at the same time? Let's try this, again.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
accounts.fp.o seems to be unreliable again today, let's drop this
again so tests don't fail on it.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This reverts commit 56c9e80f60.
Things seem to have settled down with the mass rebuild and this
test seems to be back to consistently taking about 90 minutes.
