srbala/os-autoinst-distri-fedora
1
0
Fork 0
mirror of https://pagure.io/fedora-qa/os-autoinst-distri-fedora.git synced 2024-11-22 22:13:08 +00:00
Code Issues Releases Activity
4cb73ab7f3
os-autoinst-distri-fedora/tests/disk_custom_blivet_btrfs_preserve_home.pm

117 lines
3.9 KiB
Perl
Raw Normal View History

Create testcase to recreate Btrfs layout using Blivet and preserve home. This PR uses the Anaconda Blivet partitioning to recreate a partition layout while preserving the content of the /home subvolume. It also adds the postinstall test to check that the home has been preserved.
2020-12-10 12:30:59 +00:00
use base "anacondatest";
use strict;
use utils;
use testapi;
use anaconda;
sub run {
my $self = shift;
# Go to INSTALLATION DESTINATION and ensure the disk is selected.
# Because PARTITIONING starts with 'custom_blivet', this will select blivet-gui.
select_disks();
assert_and_click "anaconda_spoke_done";
if (get_var("UEFI")) {
# if we're running on UEFI, let us reformat the UEFI first
Simplify blivet_btrfs_preserve_home, drop unneeded needles There's no need to do all this 'check whether it's selected and click it if not' stuff (for three different mount points). Just always click it. If it's already selected, clicking it again doesn't hurt (one of these stanzas even clicks it *even if it's selected*!) If we need to cover both cases, we just need two needles with the same tag, we don't need separate code paths. In each case, though, we actually haven't matched one of the needles for ages (the most recent was part_boot_selected, but now we're using GPT by default, we won't hit that any more as it'll be the BIOS boot partition that's selected by default), so delete the needles we aren't matching any more. If we *do* hit any case where we need to handle the 'other' state, we can just add the alternative needle with the same tag. Signed-off-by: Adam Williamson <awilliam@redhat.com>
2023-04-29 00:05:37 +00:00
# Select the UEFI partition if it is not selected by default;
# if it is, clicking it is harmless
assert_and_click "anaconda_blivet_part_efi";
wait_still_screen 5;
Create testcase to recreate Btrfs layout using Blivet and preserve home. This PR uses the Anaconda Blivet partitioning to recreate a partition layout while preserving the content of the /home subvolume. It also adds the postinstall test to check that the home has been preserved.
2020-12-10 12:30:59 +00:00
# Go to the partition settings
assert_and_click "anaconda_blivet_part_edit";
# Select the Format option
assert_and_click "anaconda_blivet_part_format";
Drop a useless check_screen (needle missing) This check_screen always fails, because the needle doesn't exist and never has - the commit that added the check_screen didn't add a matching needle. In every run of the test I've checked from the last two months, the initially-selected filesystem is always xfs anyway. Let's just drop the check_screen conditional and always expect we have to set the correct filesystem. Signed-off-by: Adam Williamson <awilliam@redhat.com>
2023-04-28 22:51:47 +00:00
assert_and_click "anaconda_blivet_part_fs_select";
blivet btrfs preserve home: workaround filesystem list issue See https://bugzilla.redhat.com/show_bug.cgi?id=2324231 - since the port to Wayland, the entry we need in the filesystem list is not visible at first, we need to scroll the list to find it. Signed-off-by: Adam Williamson <awilliam@redhat.com>
2024-11-06 19:06:24 +00:00
unless (check_screen "anaconda_blivet_part_fs_efi_filesystem", 5) {
record_soft_failure "https://bugzilla.redhat.com/show_bug.cgi?id=2324231";
for (1 .. 15) {
send_key "up";
}
}
Drop a useless check_screen (needle missing) This check_screen always fails, because the needle doesn't exist and never has - the commit that added the check_screen didn't add a matching needle. In every run of the test I've checked from the last two months, the initially-selected filesystem is always xfs anyway. Let's just drop the check_screen conditional and always expect we have to set the correct filesystem. Signed-off-by: Adam Williamson <awilliam@redhat.com>
2023-04-28 22:51:47 +00:00
assert_and_click "anaconda_blivet_part_fs_efi_filesystem";
Create testcase to recreate Btrfs layout using Blivet and preserve home. This PR uses the Anaconda Blivet partitioning to recreate a partition layout while preserving the content of the /home subvolume. It also adds the postinstall test to check that the home has been preserved.
2020-12-10 12:30:59 +00:00
# Select the mountpoint field
send_key_until_needlematch("anaconda_blivet_mountpoint_selected", "tab", 3, 5);
# Fill in the mountpoint
type_very_safely "/boot/efi";
# Confirm the settings
assert_and_click "anaconda_blivet_part_format_button";
}
# Reformat the /boot partition
Robustify /boot selection in blivet_btrfs_preserve_home This is failing often since the Wayland port, add a second click if the first doesn't select the partition. Signed-off-by: Adam Williamson <awilliam@redhat.com>
2024-11-12 19:35:21 +00:00
wait_still_screen 2;
Simplify blivet_btrfs_preserve_home, drop unneeded needles There's no need to do all this 'check whether it's selected and click it if not' stuff (for three different mount points). Just always click it. If it's already selected, clicking it again doesn't hurt (one of these stanzas even clicks it *even if it's selected*!) If we need to cover both cases, we just need two needles with the same tag, we don't need separate code paths. In each case, though, we actually haven't matched one of the needles for ages (the most recent was part_boot_selected, but now we're using GPT by default, we won't hit that any more as it'll be the BIOS boot partition that's selected by default), so delete the needles we aren't matching any more. If we *do* hit any case where we need to handle the 'other' state, we can just add the alternative needle with the same tag. Signed-off-by: Adam Williamson <awilliam@redhat.com>
2023-04-29 00:05:37 +00:00
assert_and_click "anaconda_blivet_part_boot";
Robustify /boot selection in blivet_btrfs_preserve_home This is failing often since the Wayland port, add a second click if the first doesn't select the partition. Signed-off-by: Adam Williamson <awilliam@redhat.com>
2024-11-12 19:35:21 +00:00
assert_and_click "anaconda_blivet_part_boot" unless (check_screen "anaconda_blivet_part_boot_selected", 5);
Simplify blivet_btrfs_preserve_home, drop unneeded needles There's no need to do all this 'check whether it's selected and click it if not' stuff (for three different mount points). Just always click it. If it's already selected, clicking it again doesn't hurt (one of these stanzas even clicks it *even if it's selected*!) If we need to cover both cases, we just need two needles with the same tag, we don't need separate code paths. In each case, though, we actually haven't matched one of the needles for ages (the most recent was part_boot_selected, but now we're using GPT by default, we won't hit that any more as it'll be the BIOS boot partition that's selected by default), so delete the needles we aren't matching any more. If we *do* hit any case where we need to handle the 'other' state, we can just add the alternative needle with the same tag. Signed-off-by: Adam Williamson <awilliam@redhat.com>
2023-04-29 00:05:37 +00:00
wait_still_screen 5;
Create testcase to recreate Btrfs layout using Blivet and preserve home. This PR uses the Anaconda Blivet partitioning to recreate a partition layout while preserving the content of the /home subvolume. It also adds the postinstall test to check that the home has been preserved.
2020-12-10 12:30:59 +00:00
# Go to the partition settings
assert_and_click "anaconda_blivet_part_edit";
# Select the Format option
assert_and_click "anaconda_blivet_part_format";
Drop a check for ext4 filesystem already selected This has not been hit for a year (on stg; three years on prod). I *think* it would only be hit if we ran the test on an Everything image, but as the test is now specifically associated with the Server install DVD, that doesn't seem likely to happen. If we somehow *do* hit ext4 pre-selected again, this can still be handled simply by adding an alternate anaconda_blivet_part_fs_ext4 needle which matches on ext4 already being selected; that avoids the need to keep an alternate code path around. Signed-off-by: Adam Williamson <awilliam@redhat.com>
2023-04-28 23:46:48 +00:00
assert_and_click "anaconda_blivet_part_fs_select";
assert_and_click "anaconda_blivet_part_fs_ext4";
Create testcase to recreate Btrfs layout using Blivet and preserve home. This PR uses the Anaconda Blivet partitioning to recreate a partition layout while preserving the content of the /home subvolume. It also adds the postinstall test to check that the home has been preserved.
2020-12-10 12:30:59 +00:00
# Select the mountpoint field
send_key_until_needlematch("anaconda_blivet_mountpoint_selected", "tab", 3, 5);
# Fill in the mountpoint
type_very_safely "/boot";
# Confirm the settings
assert_and_click "anaconda_blivet_part_format_button";
# Select the BTRFS part
assert_and_click "anaconda_blivet_volumes_icon";
# Select the home partition
Simplify blivet_btrfs_preserve_home, drop unneeded needles There's no need to do all this 'check whether it's selected and click it if not' stuff (for three different mount points). Just always click it. If it's already selected, clicking it again doesn't hurt (one of these stanzas even clicks it *even if it's selected*!) If we need to cover both cases, we just need two needles with the same tag, we don't need separate code paths. In each case, though, we actually haven't matched one of the needles for ages (the most recent was part_boot_selected, but now we're using GPT by default, we won't hit that any more as it'll be the BIOS boot partition that's selected by default), so delete the needles we aren't matching any more. If we *do* hit any case where we need to handle the 'other' state, we can just add the alternative needle with the same tag. Signed-off-by: Adam Williamson <awilliam@redhat.com>
2023-04-29 00:05:37 +00:00
assert_and_click "anaconda_blivet_part_home";
Create testcase to recreate Btrfs layout using Blivet and preserve home. This PR uses the Anaconda Blivet partitioning to recreate a partition layout while preserving the content of the /home subvolume. It also adds the postinstall test to check that the home has been preserved.
2020-12-10 12:30:59 +00:00
# Go to the partition settings
assert_and_click "anaconda_blivet_part_edit";
# Select the Set mountpoint option
assert_and_click "anaconda_blivet_part_setmountpoint";
# Type the mountpoint
type_very_safely "/home";
# Confirm
assert_and_click "anaconda_blivet_part_setmountpoint_button";
# Wait some time for the pane to settle, without this,
# the needle boolean check will fade too fast without actually
# taking any effect.
sleep 5;
# While there are some root subvolumes (it seems that there can be more than one)
# continue to delete them.
while (check_screen "anaconda_blivet_part_root_exists", 2) {
assert_and_click "anaconda_blivet_part_root_exists";
assert_and_click "anaconda_blivet_part_delete";
assert_and_click "anaconda_blivet_btn_ok";
Add a perltidy check and apply it to the entire codebase Signed-off-by: Adam Williamson <awilliam@redhat.com>
2022-07-28 20:32:57 +00:00
sleep 5;
Create testcase to recreate Btrfs layout using Blivet and preserve home. This PR uses the Anaconda Blivet partitioning to recreate a partition layout while preserving the content of the /home subvolume. It also adds the postinstall test to check that the home has been preserved.
2020-12-10 12:30:59 +00:00
}
# Add new root partition
Add a test of an additional repository using a metalink (#198) As suggested by @kparal, this adds a test that specifies an additional repository using a metalink. The repository contains a single package, 'testpackage', that supplements glibc (so it should always get installed). The test runs an install then checks that testpackage got installed. We also deduplicate a pair of needles which were matching on the same anaconda UI feature (an "add" button) and use that same needle in this test. Signed-off-by: Adam Williamson <awilliam@redhat.com>
2021-08-11 19:15:46 +00:00
assert_and_click "anaconda_add";
Create testcase to recreate Btrfs layout using Blivet and preserve home. This PR uses the Anaconda Blivet partitioning to recreate a partition layout while preserving the content of the /home subvolume. It also adds the postinstall test to check that the home has been preserved.
2020-12-10 12:30:59 +00:00
# Select the name textfield
send_key_until_needlematch("anaconda_blivet_part_name_selected", "tab", 3, 5);
# type the new name
type_very_safely "newroot";
# Go to next field
send_key "tab";
# Type the mountpoint
type_very_safely "/";
# Confirm settings
assert_and_click "anaconda_blivet_btn_ok";
# Confirm everything and close the hub
assert_and_click "anaconda_spoke_done";
assert_and_click "anaconda_part_accept_changes";
# Anaconda hub
Add a perltidy check and apply it to the entire codebase Signed-off-by: Adam Williamson <awilliam@redhat.com>
2022-07-28 20:32:57 +00:00
assert_screen "anaconda_main_hub", 300;
Create testcase to recreate Btrfs layout using Blivet and preserve home. This PR uses the Anaconda Blivet partitioning to recreate a partition layout while preserving the content of the /home subvolume. It also adds the postinstall test to check that the home has been preserved.
2020-12-10 12:30:59 +00:00
}
sub test_flags {
Add a perltidy check and apply it to the entire codebase Signed-off-by: Adam Williamson <awilliam@redhat.com>
2022-07-28 20:32:57 +00:00
return {fatal => 1};
Create testcase to recreate Btrfs layout using Blivet and preserve home. This PR uses the Anaconda Blivet partitioning to recreate a partition layout while preserving the content of the /home subvolume. It also adds the postinstall test to check that the home has been preserved.
2020-12-10 12:30:59 +00:00
}
1;
# vim: set sw=4 et:
Reference in New Issue Copy Permalink