os-autoinst-distri-fedora/lib/utils.pm

package utils;

use strict;

use base 'Exporter';
use Exporter;

use lockapi;
use testapi;
our @EXPORT = qw/run_with_error_check type_safely type_very_safely desktop_vt boot_to_login_screen console_login console_switch_layout desktop_switch_layout console_loadkeys_us do_bootloader boot_decrypt check_release menu_launch_type repo_setup setup_workaround_repo cleanup_workaround_repo console_initial_setup handle_welcome_screen gnome_initial_setup anaconda_create_user check_desktop download_modularity_tests quit_firefox advisory_get_installed_packages advisory_check_nonmatching_packages start_with_launcher quit_with_shortcut lo_dismiss_tip disable_firefox_studies select_rescue_mode copy_devcdrom_as_isofile bypass_1691487 get_release_number check_left_bar check_top_bar check_prerelease check_version spell_version_number _assert_and_click is_branched rec_log click_unwanted_notifications repos_mirrorlist register_application get_registered_applications solidify_wallpaper/;

# We introduce this global variable to hold the list of applications that have
# registered during the apps_startstop_test when they have sucessfully run.
our @application_list;

sub run_with_error_check {
    my ($func, $error_screen) = @_;
    # Check screen does not work for serial console, so we need to use
    # different checking mechanism for it.
    if (testapi::is_serial_terminal) {
        # by using 'unless' and 'expect_not_found=>1' here we avoid
        # the web UI showing each failure to see the error message as
        # a 'failed match'
        die "Error screen appeared" unless (wait_serial($error_screen, timeout=>5, expect_not_found=>1));
        $func->();
        die "Error screen appeared" unless (wait_serial($error_screen, timeout=>5, expect_not_found=>1));
    }
    else {
        die "Error screen appeared" if (check_screen $error_screen, 5);
        $func->();
        die "Error screen appeared" if (check_screen $error_screen, 5);
    }
}

# high-level 'type this string quite safely but reasonably fast'
# function whose specific implementation may vary
sub type_safely {
    my $string = shift;
    type_string($string, wait_screen_change => 3, max_interval => 20);
    # similarity level 45 as there will commonly be a flashing
    # cursor and the default level (47) is slightly too tight
    wait_still_screen(stilltime=>2, similarity_level=>45);
}

# high-level 'type this string extremely safely and rather slow'
# function whose specific implementation may vary
sub type_very_safely {
    my $string = shift;
    type_string($string, wait_screen_change => 1, max_interval => 1);
    # similarity level 45 as there will commonly be a flashing
    # cursor and the default level (47) is slightly too tight
    wait_still_screen(stilltime=>5, similarity_level=>45);
}

sub get_release_number {
    # return the release number; so usually VERSION, but for Rawhide,
    # we return RAWREL. This allows us to avoid constantly doing stuff
    # like `if ($version eq "Rawhide" || $version > 30)`.
    my $version = get_var("VERSION");
    my $rawrel = get_var("RAWREL", "Rawhide");
    return $rawrel if ($version eq "Rawhide");
    return $version
}

# Figure out what tty the desktop is on, switch to it. Assumes we're
# at a root console
sub desktop_vt {
    # use loginctl or ps to find the tty of test's session (loginctl)
    # or gnome-session, Xwayland or Xorg (ps); as of 2019-09 we often
    # get tty? for Xwayland and Xorg processes, so using loginctl can
    # help
    my $xout;
    # don't fail test if we don't find any process, just guess tty1.
    # os-autoinst calls the script with 'bash -e' which causes it to
    # stop as soon as any command fails, so we use ||: to make the
    # first grep return 0 even if it matches nothing
    eval { $xout = script_output ' loginctl | grep test ||:; ps -e | egrep "(gnome-session|Xwayland|Xorg)" | grep -o tty[0-9]' };
    my $tty = 1; # default
    while ($xout =~ /tty(\d)/g) {
        $tty = $1; # most recent match is probably best
    }
    send_key "ctrl-alt-f${tty}";
    # work around https://gitlab.gnome.org/GNOME/gnome-software/issues/582
    # if it happens. As of 2019-05, seeing something similar on KDE too
    my $desktop = get_var('DESKTOP');
    if (check_screen "auth_required", 10) {
        record_soft_failure "spurious 'auth required' - https://gitlab.gnome.org/GNOME/gnome-software/issues/582";
        assert_and_click "auth_required" if ($desktop eq 'kde');
        # bit sloppy but correct for both...
        type_very_safely "weakpassword\n";
        # as of 2019-04 when we hit this bug it seems to ask for
        # auth *twice*, so handle that
        sleep 3;
        if (check_screen "auth_required", 1) {
            type_very_safely "weakpassword\n";
        }
    }
}

# Wait for login screen to appear. Handle the annoying GPU buffer
# problem where we see a stale copy of the login screen from the
# previous boot. Will suffer a ~30 second delay if there's a chance
# we're *already at* the expected login screen.
sub boot_to_login_screen {
    my %args = @_;
    $args{timeout} //= 300;
    if (testapi::is_serial_terminal) {
        # For serial console, just wait for the login prompt
        unless (wait_serial "login:", timeout=>$args{timeout}) {
            die "No login prompt shown on serial console.";
        }
    }
    else {
        # we may start at a screen that matches one of the needles; if so,
        # wait till we don't (e.g. when rebooting at end of live install,
        # we match text_console_login until the console disappears).
        # The following is true for non-serial console.
        my $count = 5;
        while (check_screen("login_screen", 3) && $count > 0) {
           sleep 5;
           $count -= 1;
        }
       assert_screen "login_screen", $args{timeout};
       if (match_has_tag "graphical_login") {
           wait_still_screen 10, 30;
           assert_screen "login_screen";
       }
    }
}

# Switch keyboard layouts at a console
sub console_switch_layout {
    # switcher key combo differs between layouts, for console
    if (get_var("LANGUAGE", "") eq "russian") {
        send_key "ctrl-shift";
    }
}

# switch to 'native' or 'ascii' input method in a graphical desktop
# usually switched configs have one mode for inputting ascii-ish
# characters (which may be 'us' keyboard layout, or a local layout for
# inputting ascii like 'jp') and one mode for inputting native
# characters (which may be another keyboard layout, like 'ru', or an
# input method for more complex languages)
# 'environment' can be a desktop name or 'anaconda' for anaconda
# if not set, will use get_var('DESKTOP') or default 'anaconda'
sub desktop_switch_layout {
    my ($layout, $environment) = @_;
    $layout //= 'ascii';
    $environment //= get_var("DESKTOP", "anaconda");
    # if already selected, we're good
    return if (check_screen "${environment}_layout_${layout}", 3);
    # otherwise we need to switch
    my $switcher = "alt-shift";  # anaconda
    $switcher = "super-spc" if $environment eq 'gnome';
    # KDE? not used yet
    send_key $switcher;
    assert_screen "${environment}_layout_${layout}", 3;
}

# this is used at the end of console_login to check if we got a prompt
# indicating that we got a bash shell, but sourcing of /etc/bashrc
# failed (the prompt looks different in this case). We treat this as
# a soft failure.
sub _console_login_finish {
    # The check differs according to the console used.
    if (testapi::is_serial_terminal) {
        unless (wait_serial("-bash-.*[#\$]", timeout=>5, expect_not_found=>1)) {
            record_soft_failure "It looks like profile sourcing failed";
        }
    }
    else {
        if (match_has_tag "bash_noprofile") {
            record_soft_failure "It looks like profile sourcing failed";
        }
    }
}

# this subroutine handles logging in as a root/specified user into console
# it requires TTY to be already displayed (handled by the root_console()
# method of distribution classes)
sub console_login {
    my %args = (
        user => "root",
        password => get_var("ROOT_PASSWORD", "weakpassword"),
        # default is 10 seconds, set below, 0 means 'default'
        timeout => 0,
        @_);
    $args{timeout} ||= 10;

    # Since we do not test many serial console tests, and we probably
    # only want to test serial console on a minimal installation only,
    # let us not do all the magic to handle different console logins
    # and let us simplify the process.
    # We will check if we are logged in, and if so, we will log out to
    # enable a new proper login based on the user variable.
    if (get_var("SERIAL_CONSOLE")) {
        # Check for the usual prompt.
        if (wait_serial("~\][#\$]", timeout=>5, quiet=>1)) {
            type_string "logout\n";
            # Wait a bit to let the logout properly finish.
            sleep 10;
        }
        # Do the new login.
        type_string $args{user};
        type_string "\n";
        sleep 2;
        type_string $args{password};
        type_string "\n";
        # Let's perform a simple login test. This is the same as
        # whoami, but has the advantage of existing in installer env
        assert_script_run "id -un";
        unless (wait_serial $args{user}, timeout=>5) {
            die "Logging onto the serial console has failed.";
        }
    }
    else {
        # There's a timing problem when we switch from a logged-in console
        # to a non-logged in console and immediately call this function;
        # if the switch lags a bit, this function will match one of the
        # logged-in needles for the console we switched from, and get out
        # of sync (e.g. https://openqa.stg.fedoraproject.org/tests/1664 )
        # To avoid this, we'll sleep a few seconds before starting
        sleep 4;

        my $good = "";
        my $bad = "";
        if ($args{user} eq "root") {
            $good = "root_console";
            $bad = "user_console";
        }
        else {
            $good = "user_console";
            $bad = "root_console";
        }

        if (check_screen $bad, 0) {
            # we don't want to 'wait' for this as it won't return
            script_run "exit", 0;
            sleep 2;
        }

        assert_screen [$good, 'text_console_login'], $args{timeout};
        # if we're already logged in, all is good
        if (match_has_tag $good) {
            _console_login_finish();
            return;
        }
        # otherwise, we saw the login prompt, type the username
        type_string("$args{user}\n");
        assert_screen [$good, 'console_password_required'], 30;
        # on a live image, just the user name will be enough
        if (match_has_tag $good) {
            # clear the screen (so the remaining login prompt text
            # doesn't confuse subsequent runs of this)
            my $clearstr = "clear\n";
            $clearstr = "cleqr\n" if (get_var("LANGUAGE") eq 'french');
            type_string $clearstr;
            _console_login_finish();
            return;
        }
        # otherwise, type the password
        type_string "$args{password}";
        if (get_var("SWITCHED_LAYOUT") and $args{user} ne "root") {
            # see _do_install_and_reboot; when layout is switched
            # user password is doubled to contain both US and native
            # chars
            console_switch_layout;
            type_string "$args{password}";
            console_switch_layout;
        }
        send_key "ret";
        # make sure we reached the console
        unless (check_screen($good, 30)) {
            # as of 2018-10 we have a bug in sssd which makes this take
            # unusually long in the FreeIPA tests, let's allow longer,
            # with a soft fail - RHBZ #1644919
            record_soft_failure "Console login is taking a long time - #1644919?";
            my $timeout = 30;
            # even an extra 30 secs isn't long enough on aarch64...
            $timeout = 90 if (get_var("ARCH") eq "aarch64");
            assert_screen($good, $timeout);
        }
        # clear the screen (so the remaining login prompt text
        # doesn't confuse subsequent runs of this)
        my $clearstr = "clear\n";
        $clearstr = "cleqr\n" if (get_var("LANGUAGE") eq 'french');
        type_string $clearstr;
    }
    _console_login_finish();
}

# load US layout (from a root console)
sub console_loadkeys_us {
    if (get_var('LANGUAGE') eq 'french') {
        script_run "loqdkeys us", 0;
        # might take a few secs
        sleep 3;
    }
    elsif (get_var('LANGUAGE') eq 'japanese') {
        script_run "loadkeys us", 0;
        sleep 3;
    }
}

sub do_bootloader {
    # Handle bootloader screen. 'bootloader' is syslinux or grub.
    # 'uefi' is whether this is a UEFI install, will get_var UEFI if
    # not explicitly set. 'postinstall' is whether we're on an
    # installed system or at the installer (this matters for how many
    # times we press 'down' to find the kernel line when typing args).
    # 'args' is a string of extra kernel args, if desired. 'mutex' is
    # a parallel test mutex lock to wait for before proceeding, if
    # desired. 'first' is whether to hit 'up' a couple of times to
    # make sure we boot the first menu entry. 'timeout' is how long to
    # wait for the bootloader screen.
    my %args = (
        postinstall => 0,
        params => "",
        mutex => "",
        first => 1,
        timeout => 30,
        uefi => get_var("UEFI"),
        ofw => get_var("OFW"),
        @_
    );
    # if not postinstall not UEFI and not ofw, syslinux
    $args{bootloader} //= ($args{uefi} || $args{postinstall} || $args{ofw}) ? "grub" : "syslinux";
    # we use the firmware-type specific tags because we want to be
    # sure we actually did a UEFI boot
    my $boottag = "bootloader_bios";
    $boottag = "bootloader_uefi" if ($args{uefi});
    assert_screen $boottag, $args{timeout};
    if ($args{mutex}) {
        # cancel countdown
        send_key "left";
        mutex_lock $args{mutex};
        mutex_unlock $args{mutex};
    }
    if ($args{first}) {
        # press up a couple of times to make sure we're at first entry
        send_key "up";
        send_key "up";
    }
    if ($args{params}) {
        if ($args{bootloader} eq "syslinux") {
            send_key "tab";
        }
        else {
            send_key "e";
            # we need to get to the 'linux' line here, and grub does
            # not have any easy way to do that. Depending on the arch
            # and the Fedora release, we may have to press 'down' 2
            # times, or 13, or 12, or some other goddamn number. That
            # got painful to keep track of, so let's go bottom-up:
            # press 'down' 50 times to make sure we're at the bottom,
            # then 'up' twice to reach the 'linux' line. This seems to
            # work in every permutation I can think of to test.
            for (1 .. 50) {
                send_key 'down';
            }
            sleep 1;
            send_key 'up';
            sleep 1;
            send_key 'up';
            send_key "end";
        }
        # Change type_string by type_safely because keyboard polling
        # in SLOF usb-xhci driver failed sometimes in powerpc
        type_safely " $args{params}";
    }
    save_screenshot; # for debug purpose
    # ctrl-X boots from grub editor mode
    send_key "ctrl-x";
    # return boots all other cases
    send_key "ret";
}

sub boot_decrypt {
    # decrypt storage during boot; arg is timeout (in seconds)
    my $timeout = shift || 60;
    assert_screen "boot_enter_passphrase", $timeout;
    type_string get_var("ENCRYPT_PASSWORD");
    send_key "ret";
}

sub check_release {
    # Checks whether the installed release matches a given value. E.g.
    # `check_release(23)` checks whether the installed system is
    # Fedora 23. The value can be 'Rawhide' or a Fedora release
    # number; often you will want to use `get_var('VERSION')`. Expects
    # a console prompt to be active when it is called.
    my $release = shift;
    my $check_command = "grep SUPPORT_PRODUCT_VERSION /etc/os-release";
    validate_script_output $check_command, sub { $_ =~ m/REDHAT_SUPPORT_PRODUCT_VERSION=$release/ };
}

sub disable_firefox_studies {
    # create a config file that disables Firefox's dumb 'shield
    # studies' so they don't break tests:
    # https://bugzilla.mozilla.org/show_bug.cgi?id=1529626
    # and also disables the password manager stuff so that doesn't
    # break password entry:
    # https://bugzilla.mozilla.org/show_bug.cgi?id=1635833
    assert_script_run 'mkdir -p $(rpm --eval %_libdir)/firefox/distribution';
    assert_script_run 'printf \'{"policies": {"DisableFirefoxStudies": true, "OfferToSaveLogins": false}}\' > $(rpm --eval %_libdir)/firefox/distribution/policies.json';
}

sub repos_mirrorlist {
    # Use mirrorlist not metalink so we don't hit the timing issue where
    # the infra repo is updated but mirrormanager metadata checksums
    # have not been updated, and the infra repo is rejected as its
    # metadata checksum isn't known to MM
    my $files = shift;
    $files ||= "/etc/yum.repos.d/fedora*.repo";
    assert_script_run "sed -i -e 's,metalink,mirrorlist,g' ${files}";
}

sub cleanup_workaround_repo {
    # clean up the workaround repo (see next).
    script_run "rm -rf /opt/workarounds_repo";
    script_run "rm -f /etc/yum.repos.d/workarounds.repo";
}

sub setup_workaround_repo {
    # we periodically need to pull an update from updates-testing in
    # to fix some bug or other. so, here's an organized way to do it.
    # we do this here so the workaround packages are in the repo data
    # but *not* in the package lists generated above (those should
    # only include packages from the update under test). we'll define
    # a hash of releases and update IDs. if no workarounds are needed
    # for any release, the hash can be empty and this will do nothing
    my $version = shift || get_var("VERSION");
    cleanup_workaround_repo;
    script_run "dnf -y install bodhi-client createrepo", 300;
    # write a repo config file, unless this is the support_server test
    # and it is running on a different release than the update is for
    # (in this case we need the repo to exist but do not want to use
    # it on the actual support_server system)
    unless (get_var("TEST") eq "support_server" && $version ne get_var("CURRREL")) {
        assert_script_run 'printf "[workarounds]\nname=Workarounds repo\nbaseurl=file:///opt/workarounds_repo\nenabled=1\nmetadata_expire=1\ngpgcheck=0" > /etc/yum.repos.d/workarounds.repo';
    }
    assert_script_run "mkdir -p /opt/workarounds_repo";
    assert_script_run "pushd /opt/workarounds_repo";
    my %workarounds = (
        "32" => [],
        "33" => [],
        "34" => ["FEDORA-2021-c2bfa5e4f6"]
    );
    # then we'll download each update for our release:
    my $advortasks = $workarounds{$version};
    foreach my $advortask (@$advortasks) {
        my $cmd = "bodhi updates download --updateid=$advortask";
        if ($advortask =~ /^\d+$/) {
            my $arch = get_var("ARCH");
            $cmd = "koji download-task --arch=$arch --arch=noarch $advortask";
        }
        my $count = 3;
        my $success = 0;
        while ($count) {
            if (script_run $cmd, 180) {
                $count -= 1;
            }
            else {
                $count = 0;
                $success = 1;
            }
        }
        die "Workaround update download failed!" unless $success;
    }
    # and create repo metadata
    assert_script_run "createrepo .";
    assert_script_run "popd";
}

sub _repo_setup_compose {
    # doesn't work for IoT or CoreOS, anything that hits this on those
    # paths must work with default mirror config...
    my $subvariant = get_var("SUBVARIANT");
    return if ($subvariant eq "IoT" || $subvariant eq "CoreOS");
    # Appropriate repo setup steps for testing a compose
    # disable updates-testing and updates and use the compose location
    # as the target for fedora and rawhide rather than mirrorlist, so
    # tools see only packages from the compose under test
    my $location = get_var("LOCATION");
    return unless $location;
    assert_script_run 'dnf config-manager --set-disabled updates-testing updates';
    # script_run returns the exit code, so 'unless' here means 'if the file exists'
    unless (script_run 'test -f /etc/yum.repos.d/fedora-updates-modular.repo') {
            assert_script_run 'dnf config-manager --set-disabled updates-testing-modular updates-modular';
    }
    # we use script_run here as the rawhide and modular repo files
    # won't always exist and we don't want to bother testing or
    # predicting their existence; assert_script_run doesn't buy you
    # much with sed as it'll return 0 even if it replaced nothing
    script_run "sed -i -e 's,^metalink,#metalink,g' -e 's,^mirrorlist,#mirrorlist,g' -e 's,^#baseurl.*basearch,baseurl=${location}/Everything/\$basearch,g' -e 's,^#baseurl.*source,baseurl=${location}/Everything/source,g' /etc/yum.repos.d/{fedora,fedora-rawhide}.repo", 0;
    script_run "sed -i -e 's,^metalink,#metalink,g' -e 's,^mirrorlist,#mirrorlist,g' -e 's,^#baseurl.*basearch,baseurl=${location}/Modular/\$basearch,g' -e 's,^#baseurl.*source,baseurl=${location}/Modular/source,g' /etc/yum.repos.d/{fedora-modular,fedora-rawhide-modular}.repo", 0;

    # this can be used for debugging if something is going wrong
#    unless (script_run 'pushd /etc/yum.repos.d && tar czvf yumreposd.tar.gz * && popd') {
#        upload_logs "/etc/yum.repos.d/yumreposd.tar.gz";
#    }
}

sub _repo_setup_updates {
    # Appropriate repo setup steps for testing a Bodhi update
    # Check if we already ran, bail if so
    return unless script_run "test -f /etc/yum.repos.d/advisory.repo";
    my $version = get_var("VERSION");
    my $currrel = get_var("CURRREL", "0");
    repos_mirrorlist();
    # this can be used for debugging repo config if something is wrong
#    unless (script_run 'pushd /etc/yum.repos.d && tar czvf yumreposd.tar.gz * && popd') {
#        upload_logs "/etc/yum.repos.d/yumreposd.tar.gz";
#    }
    if ($version > $currrel) {
        # Disable updates-testing so other bad updates don't break us
        # this will do nothing on upgrade tests as we're on a stable
        # release at this point, but it won't *hurt* anything, so no
        # need to except that case really
        assert_script_run "dnf config-manager --set-disabled updates-testing";
        # same for Modular, if appropriate
        unless (script_run 'test -f /etc/yum.repos.d/fedora-updates-modular.repo') {
            assert_script_run "dnf config-manager --set-disabled updates-testing-modular";
        }
    }
    # set up the workaround repo
    setup_workaround_repo;

    # Set up an additional repo containing the update or task packages. We do
    # this rather than simply running a one-time update because it may be the
    # case that a package from the update isn't installed *now* but will be
    # installed by one of the tests; by setting up a repo containing the
    # update and enabling it here, we ensure all later 'dnf install' calls
    # will get the packages from the update.
    assert_script_run "mkdir -p /opt/update_repo";
    # if NUMDISKS is above 1, assume we want to put the update repo on
    # the other disk (to avoid huge updates exhausting space on the main
    # disk)
    if (get_var("NUMDISKS") > 1) {
        # I think the disk will always be vdb. This creates a single large
        # partition.
        assert_script_run "echo 'type=83' | sfdisk /dev/vdb";
        assert_script_run "mkfs.ext4 /dev/vdb1";
        assert_script_run "echo '/dev/vdb1 /opt/update_repo ext4 defaults 1 2' >> /etc/fstab";
        assert_script_run "mount /opt/update_repo";
    }
    assert_script_run "cd /opt/update_repo";
    script_run "dnf -y install bodhi-client createrepo koji", 300;

    # download the packages
    if (get_var("ADVISORY_NVRS")) {
        # regular update case
        foreach my $nvr (split(/ /, get_var("ADVISORY_NVRS"))) {
            if (script_run "koji download-build --arch=" . get_var("ARCH") . " --arch=noarch $nvr 2> download.log", 600) {
                # if the error was because the build has no packages
                # for our arch, that's okay, skip it. otherwise, die
                if (script_run "grep 'No .*available for $nvr' download.log") {
                    die "koji download-build failed!";
                }
            }
        }
    }
    elsif (get_var("KOJITASK")) {
        # Koji task case (KOJITASK will be set)
        assert_script_run "koji download-task --arch=" . get_var("ARCH") . " --arch=noarch " . get_var("KOJITASK"), 600;
    }
    else {
        die "Neither ADVISORY_NVRS nor KOJITASK set! Don't know what to do";
    }

    # log the exact packages in the update at test time, with their
    # source packages and epochs
    assert_script_run 'rpm -qp *.rpm --qf "%{SOURCERPM} %{EPOCH} %{NAME}-%{VERSION}-%{RELEASE}\n" | sort -u > /var/log/updatepkgs.txt';
    upload_logs "/var/log/updatepkgs.txt";
    # also log just the binary package names: this is so we can check
    # later whether any package from the update *should* have been
    # installed, but was not
    assert_script_run 'rpm -qp *.rpm --qf "%{NAME} " > /var/log/updatepkgnames.txt';
    upload_logs "/var/log/updatepkgnames.txt";

    # create the repo metadata
    assert_script_run "createrepo .";
    # write a repo config file, unless this is the support_server test
    # and it is running on a different release than the update is for
    # (in this case we need the repo to exist but do not want to use
    # it on the actual support_server system)
    unless (get_var("TEST") eq "support_server" && $version ne get_var("CURRREL")) {
        assert_script_run 'printf "[advisory]\nname=Advisory repo\nbaseurl=file:///opt/update_repo\nenabled=1\nmetadata_expire=3600\ngpgcheck=0" > /etc/yum.repos.d/advisory.repo';
        # run an update now (except for upgrade tests)
        my $relnum = get_release_number;
        if ($relnum > 33) {
            # FIXME workaround https://bugzilla.redhat.com/show_bug.cgi?id=1931034
            # drop after https://github.com/systemd/systemd/pull/18915 is merged
            # and stable
            script_run "systemctl stop systemd-oomd";
        }
        script_run "dnf -y update", 900 unless (get_var("UPGRADE"));
    }
    # mark via a variable that we've set up the update/task repo and done
    # all the logging stuff above
    set_var('_ADVISORY_REPO_DONE', '1');
}

sub repo_setup {
    # Run the appropriate sub-function for the job
    get_var("ADVISORY_OR_TASK") ? _repo_setup_updates : _repo_setup_compose;
    # This repo does not always exist for Rawhide or Branched, and
    # some things (at least realmd) try to update the repodata for
    # it even though it is disabled, and fail. At present none of the
    # tests needs it, so let's just unconditionally nuke it.
    assert_script_run "rm -f /etc/yum.repos.d/fedora-cisco-openh264.repo";
}

sub console_initial_setup {
    # Handle console initial-setup. Currently used only for ARM disk
    # image tests.
    assert_screen "console_initial_setup", 500;
    # IMHO it's better to use sleeps than to have needle for every text screen
    wait_still_screen 5;

    # Set timezone
    type_string "2\n";
    wait_still_screen 5;
    type_string "1\n"; # Set timezone
    wait_still_screen 5;
    type_string "1\n"; # Europe
    wait_still_screen 5;
    type_string "37\n"; # Prague
    wait_still_screen 7;

    # Set root password
    type_string "4\n";
    wait_still_screen 5;
    type_string get_var("ROOT_PASSWORD") || "weakpassword";
    send_key "ret";
    wait_still_screen 5;
    type_string get_var("ROOT_PASSWORD") || "weakpassword";
    send_key "ret";
    wait_still_screen 7;

    # Create user
    type_string "5\n";
    wait_still_screen 5;
    type_string "1\n"; # create new
    wait_still_screen 5;
    type_string "3\n"; # set username
    wait_still_screen 5;
    type_string get_var("USER_LOGIN", "test");
    send_key "ret";
    wait_still_screen 5;
    type_string "5\n"; # set password
    wait_still_screen 5;
    type_string get_var("USER_PASSWORD", "weakpassword");
    send_key "ret";
    wait_still_screen 5;
    type_string get_var("USER_PASSWORD", "weakpassword");
    send_key "ret";
    wait_still_screen 5;
    type_string "6\n"; # make him an administrator
    wait_still_screen 5;
    type_string "c\n";
    wait_still_screen 7;

    assert_screen "console_initial_setup_done", 30;
    type_string "c\n"; # continue
}

sub handle_welcome_screen {
    # handle the 'welcome' screen on GNOME. shared in a few places
    if (check_screen "getting_started", 45) {
        send_key "alt-f4";
        # for GNOME 40, alt-f4 doesn't work
        send_key "esc";
        wait_still_screen 5;
    }
    else {
        record_soft_failure "Welcome tour missing";
    }
    set_var("_welcome_done", 1);
}

sub gnome_initial_setup {
    # Handle gnome-initial-setup, with variations for the pre-login
    # mode (when no user was created during install) and post-login
    # mode (when user was created during install)
    my %args = (
        prelogin => 0,
        timeout => 120,
        @_
    );
    my $version = lc(get_var("VERSION"));
    # the pages we *may* need to click 'next' on. *NOTE*: 'language'
    # is the 'welcome' page, and is in fact never truly skipped; if
    # it's configured to be skipped, it just shows without the language
    # selection widget (so it's a bare 'welcome' page). Current openQA
    # tests never see 'eula' or 'network'. You can find the upstream
    # list in gnome-initial-setup/gnome-initial-setup.c , and the skip
    # config file for Fedora is vendor.conf in the package repo.
    my @nexts = ('language', 'keyboard', 'privacy', 'timezone', 'software');
    # now, we're going to figure out how many of them this test will
    # *actually* see...
    if ($args{prelogin}) {
        # 'language', 'keyboard' and 'timezone' are skipped on F28+ in
        # the 'new user' mode by
        # https://fedoraproject.org//wiki/Changes/ReduceInitialSetupRedundancy
        # https://bugzilla.redhat.com/show_bug.cgi?id=1474787 ,
        # except 'language' is never *really* skipped (see above)
        @nexts = grep {$_ ne 'keyboard'} @nexts;
        @nexts = grep {$_ ne 'timezone'} @nexts;
    }
    else {
        # 'timezone' and 'software' are suppressed for the 'existing user'
        # form of g-i-s
        @nexts = grep {$_ ne 'software'} @nexts;
        @nexts = grep {$_ ne 'timezone'} @nexts;
    }
    # 'additional software sources' screen does not display on F28+:
    # https://bugzilla.gnome.org/show_bug.cgi?id=794825
    @nexts = grep {$_ ne 'software'} @nexts;

    # note: in g-i-s 3.37.91 and later, the first screen in systemwide
    # mode has a "Start Setup" button, not a "Next" button
    assert_screen ["next_button", "start_setup", "auth_required"], $args{timeout};
    # workaround auth dialog appearing to change timezone even
    # though timezone screen is disabled
    if (match_has_tag("auth_required")) {
        record_soft_failure "Unexpected authentication required: https://gitlab.gnome.org/GNOME/gnome-initial-setup/-/issues/106";
        send_key "esc";
        assert_screen ["next_button", "start_setup"];
    }
    # wait a bit in case of animation
    wait_still_screen 3;
    # one more check for frickin auth_required
   if (check_screen "auth_required") {
        record_soft_failure "Unexpected authentication required: https://gitlab.gnome.org/GNOME/gnome-initial-setup/-/issues/106";
        send_key "esc";
    }
    # GDM 3.24.1 dumps a cursor in the middle of the screen here...
    mouse_hide if ($args{prelogin});
    for my $n (1..scalar(@nexts)) {
        # click 'Next' $nexts times, moving the mouse to avoid
        # highlight problems, sleeping to give it time to get
        # to the next screen between clicks
        mouse_set(100, 100);
        if ($n == 1) {
            # only accept start_setup one time, to avoid matching
            # on it during transition to next screen. also accept
            # next_button as in per-user mode, first screen has that
            # not start_setup
            wait_screen_change { assert_and_click ["next_button", "start_setup"]; };
        }
        else {
            wait_screen_change { assert_and_click "next_button"; };
        }
        # for Japanese, we need to workaround a bug on the keyboard
        # selection screen
        if ($n == 1 && get_var("LANGUAGE") eq 'japanese') {
            if (!check_screen 'initial_setup_kana_kanji_selected', 5) {
                record_soft_failure 'kana kanji not selected: bgo#776189';
                assert_and_click 'initial_setup_kana_kanji';
            }
        }
    }
    unless (get_var("VNC_CLIENT")) {
        # click 'Skip' one time (this is the 'goa' screen). We don't
        # get it on VNC_CLIENT case as network isn't working (yet)
        mouse_set(100,100);
        wait_screen_change { assert_and_click "skip_button"; };
    }
    send_key "ret";
    if ($args{prelogin}) {
        # create user
        my $user_login = get_var("USER_LOGIN") || "test";
        my $user_password = get_var("USER_PASSWORD") || "weakpassword";
        type_very_safely $user_login;
        wait_screen_change { assert_and_click "next_button"; };
        type_very_safely $user_password;
        send_key "tab";
        type_very_safely $user_password;
        wait_screen_change { assert_and_click "next_button"; };
        send_key "ret";
    }
    else {
        handle_welcome_screen;
    }
    # don't do it again on second load
    set_var("_setup_done", 1);
}

sub _type_user_password {
    # convenience function used by anaconda_create_user, not meant
    # for direct use
    my $user_password = get_var("USER_PASSWORD") || "weakpassword";
    if (get_var("SWITCHED_LAYOUT")) {
        # we double the password, the second time using the native
        # layout, so the password has both ASCII and native characters
        desktop_switch_layout "ascii", "anaconda";
        type_very_safely $user_password;
        desktop_switch_layout "native", "anaconda";
        type_very_safely $user_password;
    }
    else {
        type_very_safely $user_password;
    }
}

sub anaconda_create_user {
    # Create a user, in the anaconda interface. This is here because
    # the same code works both during install and for initial-setup,
    # which runs post-install, so we can share it.
    my %args = (
        timeout => 90,
        @_
    );
    my $user_login = get_var("USER_LOGIN") || "test";
    assert_and_click("anaconda_install_user_creation", timeout=>$args{timeout});
    assert_screen "anaconda_install_user_creation_screen";
    # wait out animation
    wait_still_screen 2;
    type_very_safely $user_login;
    type_very_safely "\t\t\t\t";
    _type_user_password();
    wait_screen_change { send_key "tab"; };
    wait_still_screen 2;
    _type_user_password();
    # even with all our slow typing this still *sometimes* seems to
    # miss a character, so let's try again if we have a warning bar.
    # But not if we're installing with a switched layout, as those
    # will *always* result in a warning bar at this point (see below)
    if (!get_var("SWITCHED_LAYOUT") && check_screen "anaconda_warning_bar", 3) {
        wait_screen_change { send_key "shift-tab"; };
        wait_still_screen 2;
        _type_user_password();
        wait_screen_change { send_key "tab"; };
        wait_still_screen 2;
        _type_user_password();
    }
    assert_and_click "anaconda_install_user_creation_make_admin";
    assert_and_click "anaconda_spoke_done";
    # since 20170105, we will get a warning here when the password
    # contains non-ASCII characters. Assume only switched layouts
    # produce non-ASCII characters, though this isn't strictly true
    if (get_var('SWITCHED_LAYOUT') && check_screen "anaconda_warning_bar", 3) {
        wait_still_screen 1;
        assert_and_click "anaconda_spoke_done";
    }
}

sub check_desktop {
    # Check we're at a desktop. We do this by looking for the "apps"
    # menu button ("Activities" button on GNOME, kicker button on
    # KDE). This is set up as a helper function because, for a while,
    # GNOME made the top bar translucent by default *and* we had an
    # animated background by default, which made doing this solely
    # with needle matches hard, so we had a workaround of trying to
    # open the overview with the super key and match on the app grid
    # icon. But GNOME has gone back to the top bar being a solid color
    # by default, so we don't have this problem any more and this is
    # back to just being a simple needle match.
    my %args = (
        timeout => 30,
        @_
    );
    assert_screen "apps_menu_button", $args{timeout};
    # GNOME 40 starts on the overview by default; for consistency with
    # older GNOME and KDE, let's just close it
    if (match_has_tag "apps_menu_button_active") {
        send_key "alt-f1";
        assert_screen "apps_menu_button_inactive";
    }
}

sub download_modularity_tests {
# Download the modularity test script, place in the system and then
# modify the access rights to make it executable.
    my ($whitelist) = @_;
    # we need python3-yaml for the script to run
    assert_script_run 'dnf -y install python3-yaml', 180;
    assert_script_run 'curl -o /root/test.py https://pagure.io/fedora-qa/modularity_testing_scripts/raw/master/f/modular_functions.py';
    if ($whitelist eq 'whitelist') {
	assert_script_run 'curl -o /root/whitelist https://pagure.io/fedora-qa/modularity_testing_scripts/raw/master/f/whitelist';
    }
    assert_script_run 'chmod 755 /root/test.py';
}

sub quit_firefox {
# Quit Firefox, handling the 'close multiple tabs' warning screen if
# it shows up
    send_key "ctrl-q";
    # expect to get to either the tabs warning or a console
    if (check_screen ["user_console", "root_console", "firefox_close_tabs"], 30) {
        # if we hit the tabs warning, click it
        click_lastmatch if (match_has_tag "firefox_close_tabs");
    }
    # it's a bit odd if we reach here, but could mean we quit to a
    # desktop, or the firefox_close_tabs needle went stale...
}

sub start_with_launcher {
# Get the name of the needle with a launcher, find the launcher in the menu
# and click on it to start the application. This function works for the
# Gnome desktop.

    # $launcher holds the launcher needle, but some of the apps are hidden in a submenu
    # so this must be handled first to find the launcher needle.

    my ($launcher,$submenu,$group) = @_;
    $submenu //= '';
    $group //= '';
    my $desktop = get_var('DESKTOP');

    my $item_to_check = $submenu || $launcher;
    # The following varies for different desktops.
    if ($desktop eq 'gnome') {
        # Start the Activities page
        send_key 'alt-f1';
        wait_still_screen 5;

        # Click on the menu icon to come into the menus
        assert_and_click 'overview_app_grid';
        wait_still_screen 5;

        # Find the application launcher in the current menu page.
        # If it cannot be found there, hit PageDown to go to another page.

        send_key_until_needlematch($item_to_check, 'pgdn', 5, 3);

        # If there was a submenu, click on that first.
        if ($submenu) {
            assert_and_click $submenu;
            wait_still_screen 5;
        }
        # Click on the launcher
        if (!check_screen($launcher)) {
            # On F33+, this subwindow thingy scrolls horizontally,
            # but only after we hit 'down' twice to get into it.
            # On F32 and earlier, it just scrolls vertically
            my $relnum = get_release_number;
            if ($relnum > 32) {
                send_key 'down';
                send_key 'down';
                send_key_until_needlematch($launcher, 'right', 5, 6);
            }
            else {
                send_key_until_needlematch($launcher, 'down', 5, 6);
            }
        }
        assert_and_click $launcher;
        wait_still_screen 5;
    }
    elsif ($desktop eq 'kde'){
        # Click on the KDE launcher icon
        assert_and_click 'kde_menu_launcher';
        wait_still_screen 2;

        # Select the appropriate submenu
        assert_and_click $submenu;
        wait_still_screen 2;

        # Select the appropriate menu subgroup where real launchers
        # are placed, but only if requested
        if ($group) {
            send_key_until_needlematch($group, 'down', 20, 3);
            send_key 'ret';
            #assert_and_click $group;
            wait_still_screen 2;
        }

        # Find and click on the menu item to start the application
        send_key_until_needlematch($launcher, 'down', 40, 3);
        send_key 'ret';
        wait_still_screen 5;
    }
}


sub quit_with_shortcut {
# Quit the application using the Alt-F4 keyboard shortcut
    send_key 'alt-f4';
    wait_still_screen 5;
    assert_screen 'workspace';

}

sub lo_dismiss_tip {
    # identify and close a 'tip of the day' window that shows on start
    # of all LibreOffice apps. For the 'app startup' tests.
    assert_screen ["libreoffice_tip", "libreoffice_any"];
    # we use check_screen here just in case both needles match and
    # libreoffice_any 'won'
    send_key 'esc' if (check_screen "libreoffice_tip", 2);
}

sub advisory_get_installed_packages {
    # For update tests (this only works if we've been through
    # _repo_setup_updates), figure out which packages from the update
    # are currently installed. This is here so we can do it both in
    # _advisory_post and post_fail_hook.
    return unless (get_var("_ADVISORY_REPO_DONE"));
    assert_script_run 'rpm -qa --qf "%{SOURCERPM} %{EPOCH} %{NAME}-%{VERSION}-%{RELEASE}\n" | sort -u > /tmp/allpkgs.txt';
    # this finds lines which appear in both files
    # http://www.unix.com/unix-for-dummies-questions-and-answers/34549-find-matching-lines-between-2-files.html
    if (script_run 'comm -12 /tmp/allpkgs.txt /var/log/updatepkgs.txt > /var/log/testedpkgs.txt') {
        # occasionally, for some reason, it's unhappy about sorting;
        # we shouldn't fail the test in this case, just upload the
        # files so we can see why...
        upload_logs "/tmp/allpkgs.txt", failok=>1;
        upload_logs "/var/log/updatepkgs.txt", failok=>1;
    }
    # we'll try and upload the output even if comm 'failed', as it
    # does in fact still write it in some cases
    upload_logs "/var/log/testedpkgs.txt", failok=>1;
}

sub advisory_check_nonmatching_packages {
    # For update tests (this only works if we've been through
    # _repo_setup_updates), figure out if we have a different version
    # of any package from the update installed - this indicates a
    # problem, it likely means a dep issue meant dnf installed an
    # older version from the frozen release repo
    my %args = (
        fatal => 1,
        @_
    );
    return unless (get_var("_ADVISORY_REPO_DONE"));
    # if this fails in advisory_post, we don't want to do it *again*
    # unnecessarily in post_fail_hook
    return if (get_var("_ACNMP_DONE"));
    script_run 'touch /tmp/installedupdatepkgs.txt';
    # this creates /tmp/installedupdatepkgs.txt as a sorted list of installed
    # packages with the same name as packages from the update, in the same form
    # as /var/log/updatepkgs.txt. The 'tail -1' tries to handle the problem of
    # installonly packages like the kernel, where we wind up with *multiple*
    # versions installed after the update; I'm hoping the last line of output
    # for any given package is the most recent version, i.e. the one in the
    # update.
    script_run 'for pkg in $(cat /var/log/updatepkgnames.txt); do rpm -q $pkg && rpm -q $pkg --last | head -1 | cut -d" " -f1 | xargs rpm -q --qf "%{SOURCERPM} %{EPOCH} %{NAME}-%{VERSION}-%{RELEASE}\n" >> /tmp/installedupdatepkgs.txt; done';
    script_run 'sort -u -o /tmp/installedupdatepkgs.txt /tmp/installedupdatepkgs.txt';
    # for debugging, may as well always upload these, can't hurt anything
    upload_logs "/tmp/installedupdatepkgs.txt", failok=>1;
    upload_logs "/var/log/updatepkgs.txt", failok=>1;
    # if any line appears in installedupdatepkgs.txt but not updatepkgs.txt,
    # we have a problem.
    if (script_run 'comm -23 /tmp/installedupdatepkgs.txt /var/log/updatepkgs.txt > /var/log/installednotupdatedpkgs.txt') {
        # occasionally, for some reason, it's unhappy about sorting;
        # we shouldn't fail the test in this case, just make a note
        # of it so we can look why...
        diag "Installed vs. all update package comparison unexpectedly returned non-zero!";
    }
    # this exits 1 if the file is zero-length, 0 if it's longer
    # if it's 0, that's *BAD*: we want to upload the file and fail
    unless (script_run 'test -s /var/log/installednotupdatedpkgs.txt') {
        upload_logs "/var/log/installednotupdatedpkgs.txt", failok=>1;
        my $message = "Package(s) from update not installed when it should have been! See installednotupdatedpkgs.txt";
        if ($args{fatal}) {
            set_var("_ACNMP_DONE", "1");
            die $message;
        }
        else {
            # if we're already in post_fail_hook, we don't want to die again
            record_info $message;
        }
    }
}

sub select_rescue_mode {
    # handle bootloader screen
    assert_screen "bootloader", 30;
    if (get_var('OFW')) {
        # select "rescue system" directly
        send_key "down";
        send_key "down";
        send_key "ret";
    }
    else {
        # select troubleshooting
        send_key "down";
        send_key "ret";
        # select "rescue system"
        if (get_var('UEFI')) {
            send_key "down";
            # we need this on aarch64 till #1661288 is resolved
            if (get_var('ARCH') eq 'aarch64') {
                send_key "e";
                # duped with do_bootloader, sadly...
                for (1 .. 50) {
                    send_key 'down';
                }
                sleep 1;
                send_key 'up';
                sleep 1;
                send_key 'up';
                send_key "end";
                type_safely " console=tty0";
                send_key "ctrl-x";
            }
            else {
                send_key "ret";
            }
        }
        else {
            type_string "r\n";
        }
    }

    assert_screen "rescue_select", 180; # it takes time to start anaconda
}

sub copy_devcdrom_as_isofile {
    # copy /dev/cdrom as iso file and verify checksum is same
    # as cdrom previously retrieved from ISO_URL
    my $isoname = shift;
    assert_script_run "dd if=/dev/cdrom of=$isoname", 360;
    # verify iso checksum
    my $cdurl = get_var('ISO_URL');
    # ISO_URL may not be set if we POSTed manually or something; just assume
    # we're OK in that case
    return unless $cdurl;
    my $cmd = <<EOF;
urld="$cdurl"; urld=\${urld%/*}; chkf=\$(curl -fs \$urld/ |grep CHECKSUM | sed -E 's/.*href=.//; s/\".*//') && curl -f \$urld/\$chkf -o /tmp/x
chkref=\$(grep -E 'SHA256.*dvd' /tmp/x | sed -e 's/.*= //') && echo "\$chkref $isoname" >/tmp/x
sha256sum -c /tmp/x
EOF
    assert_script_run($_) foreach (split /\n/, $cmd);
}

sub bypass_1691487 {
    if (script_run 'echo "expected command supposed to be typed without error."') {
        record_soft_failure 'brc#1691487 bypass';
        script_run 'echo "trial bypass dup chars brc#1691487"';
    }
}

sub menu_launch_type {
    # Launch an application in a graphical environment, by opening a
    # launcher, typing the specified string and hitting enter. Pass
    # the string to be typed to launch whatever it is you want.
    my $app = shift;
    # super does not work on KDE, because fml
    send_key 'alt-f1';
    # srsly KDE y u so slo
    wait_still_screen 3;
    type_very_safely $app;
    send_key 'ret';
}

sub tell_source {
    # This helper function identifies the Subvariant of the tested system.
    # For the purposes of identification testing, we are only interested
    # if the system is Workstation, Server, or something else, because,
    # except Workstation and Server, there are no graphical differences
    # between various spins and isos.
    my $iso = get_var('SUBVARIANT');
    if ($iso eq 'Workstation' or $iso eq 'Server') {
        $iso = lc($iso);
    }
    elsif ($iso eq 'AtomicHost') {
        $iso = 'atomic';
    }
    elsif ($iso eq 'Silverblue') {
        $iso = 'workstation';
    }
    else {
        $iso = 'generic';
    }
    return $iso;
}

sub check_left_bar {
    # This method is used by identification tests to check whether the Anaconda
    # bar on the left side of the screen corresponds with the correct version.
    # It looks different for Server, Workstation and others.
    my $source = tell_source;
    assert_screen "leftbar_${source}";
}

sub check_top_bar {
    # This method is used by identification tests to check whether the
    # top bar in Anaconda corresponds with the correct version of the spin.
    my $source = tell_source;
    assert_screen "topbar_${source}";
}

sub check_prerelease {
    # This method is used by identification tests to check if
    # Anaconda shows the PRERELEASE tag on various screens. These are
    # the rules anaconda follows for deciding whether to do this, as
    # of 2020-05-07:

    # 1. If there's a /.buildstamp and/or /tmp/product/.buildstamp file
    # the installer environment, and/or the environment variable
    # PRODBUILDPATH is set and points to a file that exists, it reads
    # config from those file(s), in that order of precedence, and if
    # the key 'IsFinal' exists in the section 'Main', its value is
    # used as anaconda's `product.isFinal`. Installer images built by
    # lorax have this buildstamp file, and it always sets IsFinal: if
    # --isfinal was passed to lorax it is set to True, if not it is set
    # to False. Whether lorax is run with --isfinal can be specified
    # in the Pungi config, but there's also a heuristic: it usually
    # defaults to False, but if the compose has a label and it's an
    # 'RC' or 'Update' or 'SecurityFix' compose (see definition of
    # SUPPORTED_MILESTONES in productmd.composeinfo), the default is
    # True. AFAICS, Fedora's pungi configs don't explicitly set this,
    # but rely on the heuristic. So for installer images, we expect
    # isFinal to be True for RC candidate composes and post-release
    # nightly Cloud, IoT etc. composes (these are also marked as 'RC'
    # composes), but False for Rawhide and Branched nightly composes
    # and Beta candidate composes. For installer images built by our
    # own _installer_build test, we control whether --isfinal is set
    # or not; we pass it if the update is for a stable release, we do
    # not pass it if the update is for Branched. Live images do not
    # have the buildstamp file.

    # 2. If there's no buildstamp file, the value of the environment
    # variable ANACONDA_ISFINAL is used as `product.isFinal`, default
    # of False if that environment var is not set. The live installer
    # wrapper script sets ANACONDA_ISFINAL based on the release field
    # of whatever package provides system-release: if it starts with
    # "0.", it sets ANACONA_ISFINAL to "false", otherwise it sets it
    # to "true". So for live images, we expect isFinal to be True
    # unless the fedora-release-common package release starts with 0.

    # 3. If `product.isFinal` is False, the pre-release warning and
    # tags are shown; if it is False, they are not shown.

    # We don't really need to check this stuff for update tests, as
    # the only installer images we test on updates are ones we build
    # ourselves; there's no value to this check for those really.
    # For compose tests, we will expect to see the pre-release tags if
    # the compose is Rawhide, or a Beta candidate, or it's a nightly
    # and we're checking an installer image. If it's an RC or Updates
    # candidate, or a respin release, we expect NOT to see the tags.
    # If it's a nightly and we're checking a live image, we don't do
    # the check.

    # bail if this is an update test
    return if (get_var("ADVISORY OR TASK"));

    # 0 means "tags MUST NOT be shown", 1 means "tags MUST be shown",
    # any other value means we don't care
    my $prerelease = 10;

    # if this is RC or update compose we absolutely *MUST NOT* see tags
    my $label = get_var("LABEL");
    $prerelease = 0 if ($label =~ /^(RC|Update)-/);
    # if it's a Beta compose we *MUST* see tags
    $prerelease = 1 if ($label =~ /^Beta-/);
    my $version = get_var('VERSION');
    # if it's Rawhide we *MUST* see tags
    $prerelease = 1 if ($version eq "Rawhide");
    my $build = get_var('BUILD');
    # if it's a nightly installer image we should see tags
    $prerelease = 1 if ($build =~ /\.n\.\d+/ && !get_var("LIVE"));
    # if it's a respin compose we *MUST NOT* see tags
    $prerelease = 0 if ($build =~ /Respin/);
    # we *could* go to a console and parse fedora-release-common
    # to decide if a nightly live image should have tags or not, but
    # it seems absurd as we're almost reinventing the code that
    # decides whether to show the tags, at that point, and it's not
    # really a big deal either way whether a nightly live image has
    # the tags or not. So we don't.

    # For all prerelease requiring ISOs, assert that prerelease is there.
    if ($prerelease == 1) {
        assert_screen "prerelease_note";
    }
    elsif ($prerelease == 0) {
       # If the prerelease note is shown, where it should not be, die!
       if (check_screen "prerelease_note") {
            die "The PRERELEASE tag is shown, but it should NOT be.";
       }
    }
}

sub check_version {
    # This function checks if the correct version is display during installation
    # in Anaconda, i.e. nonlive media showing Rawhide when Rawhide and version numbers
    # when not Rawhide, while live media always showing version numbers.

    my $version = lc(get_var('VERSION'));
    if ($version eq 'rawhide' && get_var('LIVE')) {
        $version = get_var('RAWREL');
    }
    assert_screen "version_${version}_ident";
}

sub spell_version_number {
    my $version = shift;
    # spelt version of Rawhide is...Rawhide
    return "Rawhide" if ($version eq 'Rawhide');
    my %ones = (
        "0" => "Zero",
        "1" => "One",
        "2" => "Two",
        "3" => "Three",
        "4" => "Four",
        "5" => "Five",
        "6" => "Six",
        "7" => "Seven",
        "8" => "Eight",
        "9" => "Nine",
    );
    my %tens = (
        "2" => "Twenty",
        "3" => "Thirty",
        "4" => "Fourty",
        "5" => "Fifty",
        "6" => "Sixty",
        "7" => "Seventy",
        "8" => "Eighty",
        "9" => "Ninety",
    );

    my $ten = substr($version, 0, 1);
    my $one = substr($version, 1, 1);
    my $speltnum = "";
    if ($one eq "0") {
        $speltnum = "$tens{$ten}";
    }
    else {
        $speltnum = "$tens{$ten} $ones{$one}";
    }
    return $speltnum;
}

sub rec_log {
    my ($line, $condition, $failref, $filename) = @_;
    $filename ||= '/tmp/os-release.log';
    if ($condition) {
        $line = "${line} - SUCCEEDED\n";
    }
    else {
        push @$failref, $line;
        $line = "${line} - FAILED\n";
    }
    script_run "echo \"$line\" >> $filename";

}

sub click_unwanted_notifications {
    # there are a few KDE tests where at some point we want to click
    # on all visible 'update available' notifications (there can be
    # more than one, thanks to
    # https://bugzilla.redhat.com/show_bug.cgi?id=1730482 ) and the
    # buggy 'akonadi_migration_agent_running' popup if it's showing -
    # https://bugzilla.redhat.com/show_bug.cgi?id=1716005
    # Returns an array indicating which notifications it closed
    wait_still_screen 5;
    my $count = 10;
    my @closed;
    while ($count > 0 && check_screen "desktop_update_notification_popup", 5) {
        $count -= 1;
        push (@closed, 'update');
        click_lastmatch;
    }
    if (check_screen "akonadi_migration_agent_running", 5) {
        click_lastmatch;
        push (@closed, 'akonadi');
    }
    return @closed;
}

# In each application test, when the application is started successfully, it
# will register to the list of applications.
sub register_application {
    my $application = shift;
    push(@application_list, $application);
    print("APPLICATION REGISTERED: $application \n");
}

# The KDE desktop tests are very difficult to maintain, because the transparency
# of the menu requires a lot of different needles to cover the elements. 
# Therefore it is useful to change the background to a solid colour. 
# Since many needles have been already created with a black background
# we will keep it that way. The following code has been taken from the
# KDE startstop tests but it is good to have it here, because it will be
# needed more often now, it seems.
sub solidify_wallpaper {
    my $desktop = get_var("DESKTOP");
    if ($desktop eq "kde") {
    # Run the Desktop settings
        # FIXME workaround a weird bug where alt-d-s does something
        # different until you right click on the desktop:
        # https://bugzilla.redhat.com/show_bug.cgi?id=1933118
        mouse_set 512, 384;
        mouse_click 'right';
        mouse_set 480, 384;
        mouse_click 'left';
        hold_key 'alt';
        send_key 'd';
        send_key 's';
        release_key 'alt';
        # Select type of background
        assert_and_click "deskset_select_type";
        wait_still_screen 2;
        # Select plain color type
        assert_and_click "deskset_plain_color";
        wait_still_screen 2;
        # Open colors selection
        assert_and_click "deskset_select_color";
        wait_still_screen 2;
        # Select black
        assert_and_click "deskset_select_black";
        wait_still_screen 2;
        # Confirm
        assert_and_click "kde_ok";
        wait_still_screen 2;
        # Close the application
        assert_and_click "kde_ok";
    }
    elsif ($desktop eq "gnome") {
        # Start the terminal to set up backgrounds.
        menu_launch_type "gnome-terminal";
        # wait to be sure it's fully open
        wait_still_screen 5;
        # When the application opens, run command in it to set the background to black
        type_very_safely "gsettings set org.gnome.desktop.background picture-uri ''";
        send_key 'ret';
        wait_still_screen 2;
        type_very_safely "gsettings set org.gnome.desktop.background primary-color '#000000'";
        send_key 'ret';
        wait_still_screen 2;
        quit_with_shortcut();
        # check that is has changed color
        assert_screen 'apps_settings_screen_black';
    }
}

1;