Switch from using auto tools to just building a new tarball

The previous system required making commits in order to do a new
build. This caused problems because we were using the git repo
directly for fedora builds and we couldn't use that exact version
when building matching packages because of needing to make new
commits in order to do the build.

Having the spec file in here also was unnecessary. It is easy to
just maintain the spec file in the Fedora package.

I still want to do a bit more future work with this to pick up
the version from a git tag.
This commit is contained in:
Bruno Wolff III 2013-06-29 12:15:15 -05:00
parent 3eacd1cee9
commit 1552a05e2c
10 changed files with 3 additions and 1614 deletions

302
INSTALL
View File

@ -1,302 +0,0 @@
Installation Instructions
*************************
Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005,
2006, 2007, 2008, 2009 Free Software Foundation, Inc.
This file is free documentation; the Free Software Foundation gives
unlimited permission to copy, distribute and modify it.
Basic Installation
==================
Briefly, the shell commands `./configure; make; make install' should
configure, build, and install this package. The following
more-detailed instructions are generic; see the `README' file for
instructions specific to this package.
The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation. It uses
those values to create a `Makefile' in each directory of the package.
It may also create one or more `.h' files containing system-dependent
definitions. Finally, it creates a shell script `config.status' that
you can run in the future to recreate the current configuration, and a
file `config.log' containing compiler output (useful mainly for
debugging `configure').
It can also use an optional file (typically called `config.cache'
and enabled with `--cache-file=config.cache' or simply `-C') that saves
the results of its tests to speed up reconfiguring. Caching is
disabled by default to prevent problems with accidental use of stale
cache files.
If you need to do unusual things to compile the package, please try
to figure out how `configure' could check whether to do them, and mail
diffs or instructions to the address given in the `README' so they can
be considered for the next release. If you are using the cache, and at
some point `config.cache' contains results you don't want to keep, you
may remove or edit it.
The file `configure.ac' (or `configure.in') is used to create
`configure' by a program called `autoconf'. You need `configure.ac' if
you want to change it or regenerate `configure' using a newer version
of `autoconf'.
The simplest way to compile this package is:
1. `cd' to the directory containing the package's source code and type
`./configure' to configure the package for your system.
Running `configure' might take a while. While running, it prints
some messages telling which features it is checking for.
2. Type `make' to compile the package.
3. Optionally, type `make check' to run any self-tests that come with
the package.
4. Type `make install' to install the programs and any data files and
documentation.
5. You can remove the program binaries and object files from the
source code directory by typing `make clean'. To also remove the
files that `configure' created (so you can compile the package for
a different kind of computer), type `make distclean'. There is
also a `make maintainer-clean' target, but that is intended mainly
for the package's developers. If you use it, you may have to get
all sorts of other programs in order to regenerate files that came
with the distribution.
6. Often, you can also type `make uninstall' to remove the installed
files again.
Compilers and Options
=====================
Some systems require unusual options for compilation or linking that
the `configure' script does not know about. Run `./configure --help'
for details on some of the pertinent environment variables.
You can give `configure' initial values for configuration parameters
by setting variables in the command line or in the environment. Here
is an example:
./configure CC=c99 CFLAGS=-g LIBS=-lposix
*Note Defining Variables::, for more details.
Compiling For Multiple Architectures
====================================
You can compile the package for more than one kind of computer at the
same time, by placing the object files for each architecture in their
own directory. To do this, you can use GNU `make'. `cd' to the
directory where you want the object files and executables to go and run
the `configure' script. `configure' automatically checks for the
source code in the directory that `configure' is in and in `..'.
With a non-GNU `make', it is safer to compile the package for one
architecture at a time in the source code directory. After you have
installed the package for one architecture, use `make distclean' before
reconfiguring for another architecture.
On MacOS X 10.5 and later systems, you can create libraries and
executables that work on multiple system types--known as "fat" or
"universal" binaries--by specifying multiple `-arch' options to the
compiler but only a single `-arch' option to the preprocessor. Like
this:
./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \
CPP="gcc -E" CXXCPP="g++ -E"
This is not guaranteed to produce working output in all cases, you
may have to build one architecture at a time and combine the results
using the `lipo' tool if you have problems.
Installation Names
==================
By default, `make install' installs the package's commands under
`/usr/local/bin', include files under `/usr/local/include', etc. You
can specify an installation prefix other than `/usr/local' by giving
`configure' the option `--prefix=PREFIX'.
You can specify separate installation prefixes for
architecture-specific files and architecture-independent files. If you
pass the option `--exec-prefix=PREFIX' to `configure', the package uses
PREFIX as the prefix for installing programs and libraries.
Documentation and other data files still use the regular prefix.
In addition, if you use an unusual directory layout you can give
options like `--bindir=DIR' to specify different values for particular
kinds of files. Run `configure --help' for a list of the directories
you can set and what kinds of files go in them.
If the package supports it, you can cause programs to be installed
with an extra prefix or suffix on their names by giving `configure' the
option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
Optional Features
=================
Some packages pay attention to `--enable-FEATURE' options to
`configure', where FEATURE indicates an optional part of the package.
They may also pay attention to `--with-PACKAGE' options, where PACKAGE
is something like `gnu-as' or `x' (for the X Window System). The
`README' should mention any `--enable-' and `--with-' options that the
package recognizes.
For packages that use the X Window System, `configure' can usually
find the X include and library files automatically, but if it doesn't,
you can use the `configure' options `--x-includes=DIR' and
`--x-libraries=DIR' to specify their locations.
Particular systems
==================
On HP-UX, the default C compiler is not ANSI C compatible. If GNU
CC is not installed, it is recommended to use the following options in
order to use an ANSI C compiler:
./configure CC="cc -Ae -D_XOPEN_SOURCE=500"
and if that doesn't work, install pre-built binaries of GCC for HP-UX.
On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot
parse its `<wchar.h>' header file. The option `-nodtk' can be used as
a workaround. If GNU CC is not installed, it is therefore recommended
to try
./configure CC="cc"
and if that doesn't work, try
./configure CC="cc -nodtk"
On Solaris, don't put `/usr/ucb' early in your `PATH'. This
directory contains several dysfunctional programs; working variants of
these programs are available in `/usr/bin'. So, if you need `/usr/ucb'
in your `PATH', put it _after_ `/usr/bin'.
On Haiku, software installed for all users goes in `/boot/common',
not `/usr/local'. It is recommended to use the following options:
./configure --prefix=/boot/common
Specifying the System Type
==========================
There may be some features `configure' cannot figure out
automatically, but needs to determine by the type of machine the package
will run on. Usually, assuming the package is built to be run on the
_same_ architectures, `configure' can figure that out, but if it prints
a message saying it cannot guess the machine type, give it the
`--build=TYPE' option. TYPE can either be a short name for the system
type, such as `sun4', or a canonical name which has the form:
CPU-COMPANY-SYSTEM
where SYSTEM can have one of these forms:
OS
KERNEL-OS
See the file `config.sub' for the possible values of each field. If
`config.sub' isn't included in this package, then this package doesn't
need to know the machine type.
If you are _building_ compiler tools for cross-compiling, you should
use the option `--target=TYPE' to select the type of system they will
produce code for.
If you want to _use_ a cross compiler, that generates code for a
platform different from the build platform, you should specify the
"host" platform (i.e., that on which the generated programs will
eventually be run) with `--host=TYPE'.
Sharing Defaults
================
If you want to set default values for `configure' scripts to share,
you can create a site shell script called `config.site' that gives
default values for variables like `CC', `cache_file', and `prefix'.
`configure' looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists. Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: not all `configure' scripts look for a site script.
Defining Variables
==================
Variables not defined in a site shell script can be set in the
environment passed to `configure'. However, some packages may run
configure again during the build, and the customized values of these
variables may be lost. In order to avoid this problem, you should set
them in the `configure' command line, using `VAR=value'. For example:
./configure CC=/usr/local2/bin/gcc
causes the specified `gcc' to be used as the C compiler (unless it is
overridden in the site shell script).
Unfortunately, this technique does not work for `CONFIG_SHELL' due to
an Autoconf bug. Until the bug is fixed you can use this workaround:
CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash
`configure' Invocation
======================
`configure' recognizes the following options to control how it
operates.
`--help'
`-h'
Print a summary of all of the options to `configure', and exit.
`--help=short'
`--help=recursive'
Print a summary of the options unique to this package's
`configure', and exit. The `short' variant lists options used
only in the top level, while the `recursive' variant lists options
also present in any nested packages.
`--version'
`-V'
Print the version of Autoconf used to generate the `configure'
script, and exit.
`--cache-file=FILE'
Enable the cache: use and save the results of the tests in FILE,
traditionally `config.cache'. FILE defaults to `/dev/null' to
disable caching.
`--config-cache'
`-C'
Alias for `--cache-file=config.cache'.
`--quiet'
`--silent'
`-q'
Do not print messages saying which checks are being made. To
suppress all normal output, redirect it to `/dev/null' (any error
messages will still be shown).
`--srcdir=DIR'
Look for the package's source code in directory DIR. Usually
`configure' can determine that directory automatically.
`--prefix=DIR'
Use DIR as the installation prefix. *Note Installation Names::
for more details, including other options available for fine-tuning
the installation locations.
`--no-create'
`-n'
Run the configure checks, but stop before creating any output
files.
`configure' also accepts some other, not widely useful, options. Run
`configure --help' for more details.

2
Makefile Normal file
View File

@ -0,0 +1,2 @@
clean: rm -f spin-kickstarts.tar.gz
dist: git archive --format=tar --prefix=spin-kickstarts | gzip > spin-kickstarts.tar.gz

View File

@ -1,194 +0,0 @@
# Automake Automagic
fedoradir = $(pkgdatadir)/
fedora_DATA = \
fedora-aos.ks \
fedora-arm-base.ks \
fedora-arm-kde.ks \
fedora-arm-kde-vfat.ks \
fedora-arm-lxde.ks \
fedora-arm-lxde-vfat.ks \
fedora-arm-mate.ks \
fedora-arm-mate-vfat.ks \
fedora-arm-minimal.ks \
fedora-arm-minimal-vfat.ks \
fedora-arm-partitioning.ks \
fedora-arm-soas.ks \
fedora-arm-soas-vfat.ks \
fedora-arm-vfat-partitioning.ks \
fedora-arm-xbase.ks \
fedora-arm-xfce.ks \
fedora-arm-xfce-vfat.ks \
fedora-install-fedora.ks \
fedora-kde-packages.ks \
fedora-live-base.ks \
fedora-live-minimization.ks \
fedora-live-desktop.ks \
fedora-livecd-desktop.ks \
fedora-live-design-suite.ks \
fedora-live-kde.ks \
fedora-livecd-kde.ks \
fedora-live-kde-base.ks \
fedora-livecd-lxde.ks \
fedora-lxde-packages.ks \
fedora-livecd-mate-compiz.ks \
fedora-live-mate-compiz.ks \
fedora-livecd-soas.ks \
fedora-soas-packages.ks \
fedora-livecd-xfce.ks \
fedora-xfce-packages.ks \
fedora-livedvd-electronic-lab.ks \
fedora-livedvd-games.ks \
fedora-livedvd-robotics.ks \
fedora-livedvd-scientific-kde.ks \
fedora-livecd-security.ks \
fedora-live-jam-kde.ks \
fedora-mate-packages.ks \
fedoda-repo-rawhide.ks \
fedora-repo-not-rawhide.ks \
fedora-repo.ks
customdir = ${pkgdatadir}/custom/
custom_DATA = \
custom/README \
custom/fedora-livedvd-haskell.ks \
custom/qa-test-day.ks
l10ndir = ${pkgdatadir}/l10n/
l10n_DATA = \
l10n/README \
l10n/fedora-livecd-desktop-de_CH.ks \
l10n/fedora-livecd-desktop-de_DE.ks \
l10n/fedora-livecd-desktop-fr_FR.ks \
l10n/fedora-livecd-desktop-nl_NL.ks \
l10n/fedora-livecd-desktop-pt_BR.ks \
l10n/fedora-livecd-desktop-pt_PT.ks \
l10n/fedora-livecd-desktop-ru_RU.ks \
l10n/fedora-livecd-kde-de_CH.ks \
l10n/fedora-livecd-kde-de_DE.ks \
l10n/fedora-livecd-kde-fr_FR.ks \
l10n/fedora-livecd-kde-nl_NL.ks \
l10n/fedora-livecd-kde-pt_PT.ks \
l10n/fedora-livecd-kde-ru_RU.ks \
l10n/fedora-livecd-lxde-de_CH.ks \
l10n/fedora-livecd-lxde-de_DE.ks \
l10n/fedora-livecd-lxde-fr_FR.ks \
l10n/fedora-livecd-lxde-ru_RU.ks \
l10n/fedora-livecd-xfce-de_CH.ks \
l10n/fedora-livecd-xfce-de_DE.ks \
l10n/fedora-livecd-xfce-fr_FR.ks \
l10n/fedora-livecd-xfce-nl_NL.ks \
l10n/fedora-livecd-xfce-pt_PT.ks \
l10n/fedora-livecd-xfce-ru_RU.ks \
l10n/fedora-livedvd-electronic-lab-de_CH.ks \
l10n/fedora-livedvd-electronic-lab-de_DE.ks \
l10n/fedora-livedvd-electronic-lab-nl_NL.ks \
l10n/fedora-livedvd-electronic-lab-pt_PT.ks \
l10n/fedora-livedvd-electronic-lab-ru_RU.ks \
l10n/fedora-livedvd-games-de_CH.ks \
l10n/fedora-livedvd-games-de_DE.ks \
l10n/fedora-livedvd-games-nl_NL.ks \
l10n/fedora-livedvd-games-pt_PT.ks \
l10n/fedora-livedvd-games-ru_RU.ks
EXTRA_DIST = \
$(fedora_DATA) \
$(custom_DATA) \
$(l10n_DATA) \
spin-kickstarts.spec.in\
spin-kickstarts.spec \
ChangeLog \
COPYING \
AUTHORS \
README
DISTCLEANFILES = \
intltool-extract \
intltool-merge \
intltool-update
install-exec-local:
uninstall-local:
rm -rf $(DESTDIR)$(pkgdatadir)
clean:
rm -f ChangeLog
rm -f *~
rm -f spin-kickstarts.spec
rm -f config.status config.log
rm -rf autom4te.cache/
find -type f -name "Makefile" -exec rm -f {} \;
find -type f -name "*.rpmnew" -exec rm -f {} \;
find -type f -name "*.rpmsave" -exec rm -f {} \;
find -type f -name "Makefile.in" -exec rm -f {} \;
find -type f -name "*.log" -exec rm -f {} \;
find -type f -name "spin-kickstarts-*.tar.gz" -exec mv -f {} .. \;
rm -f aclocal.m4 configure
ChangeLog:
(GIT_DIR=.git git log > .changelog.tmp && mv .changelog.tmp ChangeLog; rm -f .changelog.tmp) || (touch ChangeLog; echo 'git directory not found: installing possibly empty changelog.' >&2)
rpm: ChangeLog dist
@(rpmbuild -ta ${PACKAGE}-$(PACKAGE_VERSION).tar.gz)
srpm: ChangeLog dist
@(rpmbuild -ts ${PACKAGE}-$(PACKAGE_VERSION).tar.gz)
CVS_PKGVERSION=`echo $(PACKAGE_VERSION) | sed -e 's/\./_/g'`
CVSTAG=$(PACKAGE_NAME)-$(CVS_PACKAGEVERSION)
tag:
@cvs tag -F $(CVSTAG)
RELEASE=`rpm -q --qf="%{RELEASE}\n" --specfile ${PACKAGE}.spec | head -n 1`
F-7: srpm
@(mock -v -r fedora-7-i386 rebuild ~/rpmbuild/SRPMS/${PACKAGE}-$(PACKAGE_VERSION)-$(RELEASE).src.rpm)
F-8: srpm
@(mock -v -r fedora-8-i386 rebuild ~/rpmbuild/SRPMS/${PACKAGE}-$(PACKAGE_VERSION)-$(RELEASE).src.rpm)
F-9: srpm
@(mock -v -r fedora-9-i386 rebuild ~/rpmbuild/SRPMS/${PACKAGE}-$(PACKAGE_VERSION)-$(RELEASE).src.rpm)
devel: srpm
@(mock -v -r fedora-devel-i386 rebuild ~/rpmbuild/SRPMS/${PACKAGE}-$(PACKAGE_VERSION)-$(RELEASE).src.rpm)
EL-5: srpm
@(mock -v -r epel-5-i386 rebuild ~/rpmbuild/SRPMS/${PACKAGE}-$(PACKAGE_VERSION)-$(RELEASE).src.rpm)
mock: srpm F-7 F-8 F-9 devel EL-5
RELEASE_NUM=`rpm -q --qf="%{RELEASE}\n" --specfile ${PACKAGE}.spec | head -n 1 | cut -d'.' -f 1`
fpeople: mock
rm -rf public_html
mkdir -p public_html/${PACKAGE}/$(PACKAGE_VERSION)-$(RELEASE_NUM)/{el5,fc7,fc8,fc9}
cp ${PACKAGE}-$(PACKAGE_VERSION).tar.gz public_html/${PACKAGE}/$(PACKAGE_VERSION)-$(RELEASE_NUM)/.
cp ${PACKAGE}.spec public_html/${PACKAGE}/$(PACKAGE_VERSION)-$(RELEASE_NUM)/.
cp /var/lib/mock/epel-5-i386/result/* public_html/${PACKAGE}/$(PACKAGE_VERSION)-$(RELEASE_NUM)/el5/.
cp /var/lib/mock/fedora-7-i386/result/* public_html/${PACKAGE}/$(PACKAGE_VERSION)-$(RELEASE_NUM)/fc7/.
cp /var/lib/mock/fedora-8-i386/result/* public_html/${PACKAGE}/$(PACKAGE_VERSION)-$(RELEASE_NUM)/fc8/.
cp /var/lib/mock/fedora-development-i386/result/* public_html/${PACKAGE}/$(PACKAGE_VERSION)-$(RELEASE_NUM)/fc9/.
scp -r public_html fedorapeople.org:.
custom: mock
rm -rf custom
mkdir -p custom/{el5,f7,f8,f9}/{i386,x86_64,ppc,SRPMS}/
cp /var/lib/mock/epel-5-i386/result/*.noarch.rpm custom/el5/i386/.
cp /var/lib/mock/epel-5-i386/result/*.noarch.rpm custom/el5/x86_64/.
cp /var/lib/mock/epel-5-i386/result/*.noarch.rpm custom/el5/ppc/.
cp /var/lib/mock/epel-5-i386/result/*.src.rpm custom/el5/SRPMS/.
cp /var/lib/mock/fedora-7-i386/result/*.noarch.rpm custom/f7/i386/.
cp /var/lib/mock/fedora-7-i386/result/*.noarch.rpm custom/f7/x86_64/.
cp /var/lib/mock/fedora-7-i386/result/*.noarch.rpm custom/f7/ppc/.
cp /var/lib/mock/fedora-7-i386/result/*.src.rpm custom/f7/SRPMS/.
cp /var/lib/mock/fedora-8-i386/result/*.noarch.rpm custom/f8/i386/.
cp /var/lib/mock/fedora-8-i386/result/*.noarch.rpm custom/f8/x86_64/.
cp /var/lib/mock/fedora-8-i386/result/*.noarch.rpm custom/f8/ppc/.
cp /var/lib/mock/fedora-8-i386/result/*.src.rpm custom/f8/SRPMS/.
cp /var/lib/mock/fedora-development-i386/result/*.noarch.rpm custom/f9/i386/.
cp /var/lib/mock/fedora-development-i386/result/*.noarch.rpm custom/f9/x86_64/.
cp /var/lib/mock/fedora-development-i386/result/*.noarch.rpm custom/f9/ppc/.
cp /var/lib/mock/fedora-development-i386/result/*.src.rpm custom/f9/SRPMS/.
scp -r custom elwood.kanarip.com:/data/os/repos/.

1
NEWS
View File

@ -1 +0,0 @@
Most news is on http://fedorahosted.org/spin-kickstarts

26
README
View File

@ -9,36 +9,12 @@ The release specific branches contain spin concepts that:
- are approved (both by Board and Spin SIG) - are approved (both by Board and Spin SIG)
- maintained for the remainder of the release cycle - maintained for the remainder of the release cycle
When kickstart files are added or removed, Makefile.am should be updated to
reflect the change.
To rebuild the srpm for a new version or a new release without patches:
git clone ssh://git.fedorahosted.org/git/spin-kickstarts.git spin-kickstarts git clone ssh://git.fedorahosted.org/git/spin-kickstarts.git spin-kickstarts
cd spin-kickstarts cd spin-kickstarts
# If you need a specific branch other than master: # If you need a specific branch other than master:
git checkout BRANCHNAME git checkout BRANCHNAME
# Edit configure.ac to update the version or release
# Edit spin-kickstarts.spec.in to update the change log
git commit -a
git push
aclocal
automake
autoconf
./configure
make dist make dist
install -D -m 644 spin-kickstarts-*.tar.gz ~/rpmbuild/SOURCES # Publish the released tar ball
# Edit spin-kickstarts.spec if some changelog history needs to be included
install -D -m 644 spin-kickstarts.spec ~/rpmbuild/SPECS
rpmbuild -ba ~/rpmbuild/SPECS/spin-kickstarts.spec
# If the sprm gets published then publish the tar.gz file on fedorahosted
scp spin-kickstarts-*.tar.gz fedorahosted.org:spin-kickstarts scp spin-kickstarts-*.tar.gz fedorahosted.org:spin-kickstarts
# Clean up the generated files: # Clean up the generated files:
git clean -f -d git clean -f -d
# To update a branch of spin-kickstarts
# Make sure the branch is current (git pull)
# Copy over the new spec file
# In each branch run make new-sources FILES=/pathto/spin-kickstarts-*.tar.gz
# Commit the changes with git commit -a
# Make a new tag with make tag
# Do the build with make build

View File

@ -1,16 +0,0 @@
AC_INIT([spin-kickstarts], 0.20.4)
AC_SUBST([RELEASE], 1)
ALL_LINGUAS="bn_IN bn ca cs da de el es fi fr gl gu hi hr hu is it ja ko ml ms nb nl or pa pl pt pt_BR ru sk sl sr@latin sr sv ta tr uk zh_CN zh_TW"
AM_INIT_AUTOMAKE
AM_MAINTAINER_MODE
AC_SUBST(DATESTAMP,`date +"%a %b %d %Y"`)
AC_CONFIG_FILES([
Makefile
spin-kickstarts.spec
])
AC_OUTPUT

View File

@ -1,520 +0,0 @@
#!/bin/sh
# install - install a program, script, or datafile
scriptversion=2009-04-28.21; # UTC
# This originates from X11R5 (mit/util/scripts/install.sh), which was
# later released in X11R6 (xc/config/util/install.sh) with the
# following copyright and license.
#
# Copyright (C) 1994 X Consortium
#
# Permission is hereby granted, free of charge, to any person obtaining a copy
# of this software and associated documentation files (the "Software"), to
# deal in the Software without restriction, including without limitation the
# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
# sell copies of the Software, and to permit persons to whom the Software is
# furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# Except as contained in this notice, the name of the X Consortium shall not
# be used in advertising or otherwise to promote the sale, use or other deal-
# ings in this Software without prior written authorization from the X Consor-
# tium.
#
#
# FSF changes to this file are in the public domain.
#
# Calling this script install-sh is preferred over install.sh, to prevent
# `make' implicit rules from creating a file called install from it
# when there is no Makefile.
#
# This script is compatible with the BSD install script, but was written
# from scratch.
nl='
'
IFS=" "" $nl"
# set DOITPROG to echo to test this script
# Don't use :- since 4.3BSD and earlier shells don't like it.
doit=${DOITPROG-}
if test -z "$doit"; then
doit_exec=exec
else
doit_exec=$doit
fi
# Put in absolute file names if you don't have them in your path;
# or use environment vars.
chgrpprog=${CHGRPPROG-chgrp}
chmodprog=${CHMODPROG-chmod}
chownprog=${CHOWNPROG-chown}
cmpprog=${CMPPROG-cmp}
cpprog=${CPPROG-cp}
mkdirprog=${MKDIRPROG-mkdir}
mvprog=${MVPROG-mv}
rmprog=${RMPROG-rm}
stripprog=${STRIPPROG-strip}
posix_glob='?'
initialize_posix_glob='
test "$posix_glob" != "?" || {
if (set -f) 2>/dev/null; then
posix_glob=
else
posix_glob=:
fi
}
'
posix_mkdir=
# Desired mode of installed file.
mode=0755
chgrpcmd=
chmodcmd=$chmodprog
chowncmd=
mvcmd=$mvprog
rmcmd="$rmprog -f"
stripcmd=
src=
dst=
dir_arg=
dst_arg=
copy_on_change=false
no_target_directory=
usage="\
Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
or: $0 [OPTION]... SRCFILES... DIRECTORY
or: $0 [OPTION]... -t DIRECTORY SRCFILES...
or: $0 [OPTION]... -d DIRECTORIES...
In the 1st form, copy SRCFILE to DSTFILE.
In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
In the 4th, create DIRECTORIES.
Options:
--help display this help and exit.
--version display version info and exit.
-c (ignored)
-C install only if different (preserve the last data modification time)
-d create directories instead of installing files.
-g GROUP $chgrpprog installed files to GROUP.
-m MODE $chmodprog installed files to MODE.
-o USER $chownprog installed files to USER.
-s $stripprog installed files.
-t DIRECTORY install into DIRECTORY.
-T report an error if DSTFILE is a directory.
Environment variables override the default commands:
CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
RMPROG STRIPPROG
"
while test $# -ne 0; do
case $1 in
-c) ;;
-C) copy_on_change=true;;
-d) dir_arg=true;;
-g) chgrpcmd="$chgrpprog $2"
shift;;
--help) echo "$usage"; exit $?;;
-m) mode=$2
case $mode in
*' '* | *' '* | *'
'* | *'*'* | *'?'* | *'['*)
echo "$0: invalid mode: $mode" >&2
exit 1;;
esac
shift;;
-o) chowncmd="$chownprog $2"
shift;;
-s) stripcmd=$stripprog;;
-t) dst_arg=$2
shift;;
-T) no_target_directory=true;;
--version) echo "$0 $scriptversion"; exit $?;;
--) shift
break;;
-*) echo "$0: invalid option: $1" >&2
exit 1;;
*) break;;
esac
shift
done
if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
# When -d is used, all remaining arguments are directories to create.
# When -t is used, the destination is already specified.
# Otherwise, the last argument is the destination. Remove it from $@.
for arg
do
if test -n "$dst_arg"; then
# $@ is not empty: it contains at least $arg.
set fnord "$@" "$dst_arg"
shift # fnord
fi
shift # arg
dst_arg=$arg
done
fi
if test $# -eq 0; then
if test -z "$dir_arg"; then
echo "$0: no input file specified." >&2
exit 1
fi
# It's OK to call `install-sh -d' without argument.
# This can happen when creating conditional directories.
exit 0
fi
if test -z "$dir_arg"; then
trap '(exit $?); exit' 1 2 13 15
# Set umask so as not to create temps with too-generous modes.
# However, 'strip' requires both read and write access to temps.
case $mode in
# Optimize common cases.
*644) cp_umask=133;;
*755) cp_umask=22;;
*[0-7])
if test -z "$stripcmd"; then
u_plus_rw=
else
u_plus_rw='% 200'
fi
cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
*)
if test -z "$stripcmd"; then
u_plus_rw=
else
u_plus_rw=,u+rw
fi
cp_umask=$mode$u_plus_rw;;
esac
fi
for src
do
# Protect names starting with `-'.
case $src in
-*) src=./$src;;
esac
if test -n "$dir_arg"; then
dst=$src
dstdir=$dst
test -d "$dstdir"
dstdir_status=$?
else
# Waiting for this to be detected by the "$cpprog $src $dsttmp" command
# might cause directories to be created, which would be especially bad
# if $src (and thus $dsttmp) contains '*'.
if test ! -f "$src" && test ! -d "$src"; then
echo "$0: $src does not exist." >&2
exit 1
fi
if test -z "$dst_arg"; then
echo "$0: no destination specified." >&2
exit 1
fi
dst=$dst_arg
# Protect names starting with `-'.
case $dst in
-*) dst=./$dst;;
esac
# If destination is a directory, append the input filename; won't work
# if double slashes aren't ignored.
if test -d "$dst"; then
if test -n "$no_target_directory"; then
echo "$0: $dst_arg: Is a directory" >&2
exit 1
fi
dstdir=$dst
dst=$dstdir/`basename "$src"`
dstdir_status=0
else
# Prefer dirname, but fall back on a substitute if dirname fails.
dstdir=`
(dirname "$dst") 2>/dev/null ||
expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
X"$dst" : 'X\(//\)[^/]' \| \
X"$dst" : 'X\(//\)$' \| \
X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
echo X"$dst" |
sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
s//\1/
q
}
/^X\(\/\/\)[^/].*/{
s//\1/
q
}
/^X\(\/\/\)$/{
s//\1/
q
}
/^X\(\/\).*/{
s//\1/
q
}
s/.*/./; q'
`
test -d "$dstdir"
dstdir_status=$?
fi
fi
obsolete_mkdir_used=false
if test $dstdir_status != 0; then
case $posix_mkdir in
'')
# Create intermediate dirs using mode 755 as modified by the umask.
# This is like FreeBSD 'install' as of 1997-10-28.
umask=`umask`
case $stripcmd.$umask in
# Optimize common cases.
*[2367][2367]) mkdir_umask=$umask;;
.*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
*[0-7])
mkdir_umask=`expr $umask + 22 \
- $umask % 100 % 40 + $umask % 20 \
- $umask % 10 % 4 + $umask % 2
`;;
*) mkdir_umask=$umask,go-w;;
esac
# With -d, create the new directory with the user-specified mode.
# Otherwise, rely on $mkdir_umask.
if test -n "$dir_arg"; then
mkdir_mode=-m$mode
else
mkdir_mode=
fi
posix_mkdir=false
case $umask in
*[123567][0-7][0-7])
# POSIX mkdir -p sets u+wx bits regardless of umask, which
# is incompatible with FreeBSD 'install' when (umask & 300) != 0.
;;
*)
tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
if (umask $mkdir_umask &&
exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
then
if test -z "$dir_arg" || {
# Check for POSIX incompatibilities with -m.
# HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
# other-writeable bit of parent directory when it shouldn't.
# FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
ls_ld_tmpdir=`ls -ld "$tmpdir"`
case $ls_ld_tmpdir in
d????-?r-*) different_mode=700;;
d????-?--*) different_mode=755;;
*) false;;
esac &&
$mkdirprog -m$different_mode -p -- "$tmpdir" && {
ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
}
}
then posix_mkdir=:
fi
rmdir "$tmpdir/d" "$tmpdir"
else
# Remove any dirs left behind by ancient mkdir implementations.
rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
fi
trap '' 0;;
esac;;
esac
if
$posix_mkdir && (
umask $mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
)
then :
else
# The umask is ridiculous, or mkdir does not conform to POSIX,
# or it failed possibly due to a race condition. Create the
# directory the slow way, step by step, checking for races as we go.
case $dstdir in
/*) prefix='/';;
-*) prefix='./';;
*) prefix='';;
esac
eval "$initialize_posix_glob"
oIFS=$IFS
IFS=/
$posix_glob set -f
set fnord $dstdir
shift
$posix_glob set +f
IFS=$oIFS
prefixes=
for d
do
test -z "$d" && continue
prefix=$prefix$d
if test -d "$prefix"; then
prefixes=
else
if $posix_mkdir; then
(umask=$mkdir_umask &&
$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
# Don't fail if two instances are running concurrently.
test -d "$prefix" || exit 1
else
case $prefix in
*\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
*) qprefix=$prefix;;
esac
prefixes="$prefixes '$qprefix'"
fi
fi
prefix=$prefix/
done
if test -n "$prefixes"; then
# Don't fail if two instances are running concurrently.
(umask $mkdir_umask &&
eval "\$doit_exec \$mkdirprog $prefixes") ||
test -d "$dstdir" || exit 1
obsolete_mkdir_used=true
fi
fi
fi
if test -n "$dir_arg"; then
{ test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
{ test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
else
# Make a couple of temp file names in the proper directory.
dsttmp=$dstdir/_inst.$$_
rmtmp=$dstdir/_rm.$$_
# Trap to clean up those temp files at exit.
trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
# Copy the file name to the temp name.
(umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
# and set any options; do chmod last to preserve setuid bits.
#
# If any of these fail, we abort the whole thing. If we want to
# ignore errors from any of these, just make sure not to ignore
# errors from the above "$doit $cpprog $src $dsttmp" command.
#
{ test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
{ test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
{ test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
{ test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
# If -C, don't bother to copy if it wouldn't change the file.
if $copy_on_change &&
old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` &&
new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` &&
eval "$initialize_posix_glob" &&
$posix_glob set -f &&
set X $old && old=:$2:$4:$5:$6 &&
set X $new && new=:$2:$4:$5:$6 &&
$posix_glob set +f &&
test "$old" = "$new" &&
$cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
then
rm -f "$dsttmp"
else
# Rename the file to the real destination.
$doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
# The rename failed, perhaps because mv can't rename something else
# to itself, or perhaps because mv is so ancient that it does not
# support -f.
{
# Now remove or move aside any old file at destination location.
# We try this two ways since rm can't unlink itself on some
# systems and the destination file might be busy for other
# reasons. In this case, the final cleanup might fail but the new
# file should still install successfully.
{
test ! -f "$dst" ||
$doit $rmcmd -f "$dst" 2>/dev/null ||
{ $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
{ $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
} ||
{ echo "$0: cannot unlink or rename $dst" >&2
(exit 1); exit 1
}
} &&
# Now rename the file to the real destination.
$doit $mvcmd "$dsttmp" "$dst"
}
fi || exit 1
trap '' 0
fi
done
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:

376
missing
View File

@ -1,376 +0,0 @@
#! /bin/sh
# Common stub for a few missing GNU programs while installing.
scriptversion=2009-04-28.21; # UTC
# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005, 2006,
# 2008, 2009 Free Software Foundation, Inc.
# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
echo 1>&2 "Try \`$0 --help' for more information"
exit 1
fi
run=:
sed_output='s/.* --output[ =]\([^ ]*\).*/\1/p'
sed_minuso='s/.* -o \([^ ]*\).*/\1/p'
# In the cases where this matters, `missing' is being run in the
# srcdir already.
if test -f configure.ac; then
configure_ac=configure.ac
else
configure_ac=configure.in
fi
msg="missing on your system"
case $1 in
--run)
# Try to run requested program, and just exit if it succeeds.
run=
shift
"$@" && exit 0
# Exit code 63 means version mismatch. This often happens
# when the user try to use an ancient version of a tool on
# a file that requires a minimum version. In this case we
# we should proceed has if the program had been absent, or
# if --run hadn't been passed.
if test $? = 63; then
run=:
msg="probably too old"
fi
;;
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
error status if there is no known handling for PROGRAM.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
--run try to run the given command, and emulate it if it fails
Supported PROGRAM values:
aclocal touch file \`aclocal.m4'
autoconf touch file \`configure'
autoheader touch file \`config.h.in'
autom4te touch the output file, or create a stub one
automake touch all \`Makefile.in' files
bison create \`y.tab.[ch]', if possible, from existing .[ch]
flex create \`lex.yy.c', if possible, from existing .c
help2man touch the output file
lex create \`lex.yy.c', if possible, from existing .c
makeinfo touch the output file
tar try tar, gnutar, gtar, then tar without non-portable flags
yacc create \`y.tab.[ch]', if possible, from existing .[ch]
Version suffixes to PROGRAM as well as the prefixes \`gnu-', \`gnu', and
\`g' are ignored when checking the name.
Send bug reports to <bug-automake@gnu.org>."
exit $?
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing $scriptversion (GNU Automake)"
exit $?
;;
-*)
echo 1>&2 "$0: Unknown \`$1' option"
echo 1>&2 "Try \`$0 --help' for more information"
exit 1
;;
esac
# normalize program name to check for.
program=`echo "$1" | sed '
s/^gnu-//; t
s/^gnu//; t
s/^g//; t'`
# Now exit if we have it, but it failed. Also exit now if we
# don't have it and --version was passed (most likely to detect
# the program). This is about non-GNU programs, so use $1 not
# $program.
case $1 in
lex*|yacc*)
# Not GNU programs, they don't have --version.
;;
tar*)
if test -n "$run"; then
echo 1>&2 "ERROR: \`tar' requires --run"
exit 1
elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
exit 1
fi
;;
*)
if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
# We have it, but it failed.
exit 1
elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
# Could not run --version or --help. This is probably someone
# running `$TOOL --version' or `$TOOL --help' to check whether
# $TOOL exists and not knowing $TOOL uses missing.
exit 1
fi
;;
esac
# If it does not exist, or fails to run (possibly an outdated version),
# try to emulate it.
case $program in
aclocal*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`acinclude.m4' or \`${configure_ac}'. You might want
to install the \`Automake' and \`Perl' packages. Grab them from
any GNU archive site."
touch aclocal.m4
;;
autoconf*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`${configure_ac}'. You might want to install the
\`Autoconf' and \`GNU m4' packages. Grab them from any GNU
archive site."
touch configure
;;
autoheader*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`acconfig.h' or \`${configure_ac}'. You might want
to install the \`Autoconf' and \`GNU m4' packages. Grab them
from any GNU archive site."
files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
test -z "$files" && files="config.h"
touch_files=
for f in $files; do
case $f in
*:*) touch_files="$touch_files "`echo "$f" |
sed -e 's/^[^:]*://' -e 's/:.*//'`;;
*) touch_files="$touch_files $f.in";;
esac
done
touch $touch_files
;;
automake*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
You might want to install the \`Automake' and \`Perl' packages.
Grab them from any GNU archive site."
find . -type f -name Makefile.am -print |
sed 's/\.am$/.in/' |
while read f; do touch "$f"; done
;;
autom4te*)
echo 1>&2 "\
WARNING: \`$1' is needed, but is $msg.
You might have modified some files without having the
proper tools for further handling them.
You can get \`$1' as part of \`Autoconf' from any GNU
archive site."
file=`echo "$*" | sed -n "$sed_output"`
test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -f "$file"; then
touch $file
else
test -z "$file" || exec >$file
echo "#! /bin/sh"
echo "# Created by GNU Automake missing as a replacement of"
echo "# $ $@"
echo "exit 0"
chmod +x $file
exit 1
fi
;;
bison*|yacc*)
echo 1>&2 "\
WARNING: \`$1' $msg. You should only need it if
you modified a \`.y' file. You may need the \`Bison' package
in order for those modifications to take effect. You can get
\`Bison' from any GNU archive site."
rm -f y.tab.c y.tab.h
if test $# -ne 1; then
eval LASTARG="\${$#}"
case $LASTARG in
*.y)
SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.c
fi
SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
if test -f "$SRCFILE"; then
cp "$SRCFILE" y.tab.h
fi
;;
esac
fi
if test ! -f y.tab.h; then
echo >y.tab.h
fi
if test ! -f y.tab.c; then
echo 'main() { return 0; }' >y.tab.c
fi
;;
lex*|flex*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.l' file. You may need the \`Flex' package
in order for those modifications to take effect. You can get
\`Flex' from any GNU archive site."
rm -f lex.yy.c
if test $# -ne 1; then
eval LASTARG="\${$#}"
case $LASTARG in
*.l)
SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
if test -f "$SRCFILE"; then
cp "$SRCFILE" lex.yy.c
fi
;;
esac
fi
if test ! -f lex.yy.c; then
echo 'main() { return 0; }' >lex.yy.c
fi
;;
help2man*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a dependency of a manual page. You may need the
\`Help2man' package in order for those modifications to take
effect. You can get \`Help2man' from any GNU archive site."
file=`echo "$*" | sed -n "$sed_output"`
test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -f "$file"; then
touch $file
else
test -z "$file" || exec >$file
echo ".ab help2man is required to generate this page"
exit $?
fi
;;
makeinfo*)
echo 1>&2 "\
WARNING: \`$1' is $msg. You should only need it if
you modified a \`.texi' or \`.texinfo' file, or any other file
indirectly affecting the aspect of the manual. The spurious
call might also be the consequence of using a buggy \`make' (AIX,
DU, IRIX). You might want to install the \`Texinfo' package or
the \`GNU make' package. Grab either from any GNU archive site."
# The file to touch is that specified with -o ...
file=`echo "$*" | sed -n "$sed_output"`
test -z "$file" && file=`echo "$*" | sed -n "$sed_minuso"`
if test -z "$file"; then
# ... or it is the one specified with @setfilename ...
infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
file=`sed -n '
/^@setfilename/{
s/.* \([^ ]*\) *$/\1/
p
q
}' $infile`
# ... or it is derived from the source name (dir/f.texi becomes f.info)
test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
fi
# If the file does not exist, the user really needs makeinfo;
# let's fail without touching anything.
test -f $file || exit 1
touch $file
;;
tar*)
shift
# We have already tried tar in the generic part.
# Look for gnutar/gtar before invocation to avoid ugly error
# messages.
if (gnutar --version > /dev/null 2>&1); then
gnutar "$@" && exit 0
fi
if (gtar --version > /dev/null 2>&1); then
gtar "$@" && exit 0
fi
firstarg="$1"
if shift; then
case $firstarg in
*o*)
firstarg=`echo "$firstarg" | sed s/o//`
tar "$firstarg" "$@" && exit 0
;;
esac
case $firstarg in
*h*)
firstarg=`echo "$firstarg" | sed s/h//`
tar "$firstarg" "$@" && exit 0
;;
esac
fi
echo 1>&2 "\
WARNING: I can't seem to be able to run \`tar' with the given arguments.
You may want to install GNU tar or Free paxutils, or check the
command line arguments."
exit 1
;;
*)
echo 1>&2 "\
WARNING: \`$1' is needed, and is $msg.
You might have modified some files without having the
proper tools for further handling them. Check the \`README' file,
it often tells you about the needed prerequisites for installing
this package. You may also peek at any GNU archive site, in case
some other package would contain this missing \`$1' program."
exit 1
;;
esac
exit 0
# Local variables:
# eval: (add-hook 'write-file-hooks 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC"
# time-stamp-end: "; # UTC"
# End:

View File

@ -1,2 +0,0 @@
61665e7b01100c0f8370f3e1fd55d29e spin-kickstarts-0.19.1.tar.gz
72fb4e6e11580322c1bf6cbc29517a0d spin-kickstarts-0.19.2.tar.gz

View File

@ -1,178 +0,0 @@
Name: spin-kickstarts
Version: @VERSION@
Release: @RELEASE@%{?dist}
License: GPLv2+
Summary: Kickstart files and templates for creating your own Fedora Spins
Group: Applications/System
URL: http://fedorahosted.org/spin-kickstarts
Source0: http://fedorahosted.org/releases/s/p/%{name}/%{name}-%{version}.tar.gz
BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root
BuildArch: noarch
Requires: fedora-kickstarts
%description
A number of kickstarts you can use to create customized (Fedora) Spins
%package -n fedora-kickstarts
Summary: Official Fedora Spins
Group: Applications/System
Requires: spin-kickstarts = %{version}-%{release}
%description -n fedora-kickstarts
Kickstarts used to compose the official Fedora Spins (see
http://spins.fedoraproject.org/ for a full list)
%package -n custom-kickstarts
Summary: Kickstart files for Custom Spins (not official)
Group: Applications/System
Requires: spin-kickstarts = %{version}-%{release}
Requires: fedora-kickstarts = %{version}-%{release}
%description -n custom-kickstarts
Unofficial spins (remixes) brought to us by several contributors
%package -n l10n-kickstarts
Summary: Localized kickstarts for localized spins
Group: Applications/System
Requires: fedora-kickstarts = %{version}-%{release}
Requires: custom-kickstarts = %{version}-%{release}
%description -n l10n-kickstarts
Localized versions of kickstarts for localized spins
%prep
%setup -q
%build
%configure
make
%install
rm -rf $RPM_BUILD_ROOT
make install DESTDIR=$RPM_BUILD_ROOT
%clean
rm -rf $RPM_BUILD_ROOT
%files
%defattr(-,root,root,-)
%doc COPYING README AUTHORS NEWS
%dir %{_datadir}/%{name}/
%files -n fedora-kickstarts
%defattr(-,root,root,-)
%{_datadir}/%{name}/*.ks
%files -n custom-kickstarts
%defattr(-,root,root,-)
%dir %{_datadir}/%{name}/custom/
%{_datadir}/%{name}/custom/*.ks
%doc %{_datadir}/%{name}/custom/README
%files -n l10n-kickstarts
%defattr(-,root,root,-)
%dir %{_datadir}/%{name}/l10n/
%{_datadir}/%{name}/l10n/*.ks
%doc %{_datadir}/%{name}/l10n/README
%changelog
* Thu May 23 2013 Bruno Wolff III <bruno@wolff.to> 0.20.4-1
- Pick up changes for getting spins under size limits
- Pick up various fixes for other issues
* Mon May 06 2013 Bruno Wolff III <bruno@wolff.to> 0.20.3-1
- Add missing ks files to Makefile.am - bz 959911
* Wed May 01 2013 Bruno Wolff III <bruno@wolff.to> 0.20.2-1
- New ks file for Mate desktop
- Keep up with f19
* Fri Mar 15 2013 Bruno Wolff III <bruno@wolff.to> 0.20.1-1
- Initial package for f20
* Fri Feb 15 2013 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> -
0.19.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
* Wed Jan 30 2013 Luya Tshimbalanga <luya@fedoraproject.org> 0.19.2-1
- Design Suite ks renamed as fedora-live-design-suite
* Sat Oct 06 2012 Bruno Wolff III <bruno@wolff.to> 0.19.1-1
- Meego ks has been dropped
- Initial package for f19
* Sat Jul 21 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.18.1-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
* Fri Jun 15 2012 Bruno Wolff III <bruno@wolff.to> 0.18.1-1
- Initial package for f18 rawhide
- Switch back to rawhide repos until branch
- Include Russian localization ks files
* Sun Feb 12 2012 Bruno Wolff III <bruno@wolff.to> 0.17.1-1
- Rebuild post branch to build from branch repos
* Tue Oct 25 2011 Bruno Wolff III <bruno@wolff.to> 0.17.0-1
- Initial build of f17 version
- Use rawhide repo by default for live images
* Sat Oct 15 2011 Bruno Wolff III <bruno@wolff.to> 0.16.2-1
- Get an up to date version now that we are near f16 final freeze
* Sat Aug 06 2011 Bruno Wolff III <bruno@wolff.to> 0.16.1-1
- Update for F16 branch
* Fri May 20 2011 Bruno Wolff III <bruno@wolff.to> 0.16.0-1
- Initial F16 build
* Fri Apr 01 2011 Bruno Wolff III <bruno@wolff.to> 0.15.4-1
- Enough has changed that it seems worth doing a new beta build
* Wed Mar 16 2011 Bruno Wolff III <bruno@wolff.to> 0.15.3-1
- Early beta build to facilitate testing
- The alternate KDE ks file has been added to the package
* Mon Feb 14 2011 Bruno Wolff III <bruno@wolff.to> 0.15.2-1
- Rebuild to point to branched release
* Mon Feb 07 2011 Bruno Wolff III <bruno@wolff.to> 0.15.1-1
- Pre-alpha release rebuild
* Sun Oct 31 2010 Bruno Wolff III <bruno@wolff.to> 0.15.0-1
- Now that F14 is gold, we want a separate rawhide package.
- Includes most stuff from F14, minus some last minute space cutting changes.
* Tue Jul 27 2010 Bruno Wolff III <bruno@wolff.to> 0.14.1-1
- Get a snapshot of kickstarts just prior to f14 branch
* Mon Jun 07 2010 Bruno Wolff III <bruno@wolff.to> 0.14.0-1
- New release for F14
- Add some documentation about how rebuild package from git repo
- Change custom kickstarts to use ../ to refer to included kickstarts
* Sun Jul 05 2009 Jeroen van Meeuwen <kanarip a fedoraunity.org> 0.11.4-1
- Fix repos in fedora-install-fedora.ks (#505262)
* Sun May 31 2009 Jeroen van Meeuwen <kanarip a fedoraunity.org> 0.11.3-1
- New release
- Removed developer spin from the mix
* Wed Mar 04 2009 Jeroen van Meeuwen <kanarip a fedoraunity.org> 0.11.1-1
- Added de_CH localized spins
* Tue Feb 23 2009 Jeroen van Meeuwen <kanarip a fedoraunity.org> 0.11.0-2
- Remove fedora-livecd-desktop-default.ks
* Sat Nov 29 2008 Jeroen van Meeuwen <kanarip a fedoraunity.org> 0.11.0-1
- Point fedora-live-base.ks repos to f-10
- Remove sysprof from fedora-livedvd-developer.ks
- Latest and final rebuild for Fedora 10
* Sat Nov 08 2008 Jeroen van Meeuwen <kanarip a fedoraunity.org> 0.10.2-1
- Package updates to kickstarts into F-10 package
* Fri Nov 07 2008 Jeroen van Meeuwen <kanarip a fedoraunity.org> 0.10.1-1
- Second build for review #448072
* Fri May 23 2008 Jeroen van Meeuwen <kanarip a fedoraunity.org> 0.01-1
- Initial packaging