rpms/wpa_supplicant
7
0
Fork 0
Code Issues Pull Requests Releases Activity

Update to version 2.10

Browse Source 
(keeping CONFIG_WEP enabled)

Related: #2041269

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
This commit is contained in:
Davide Caratti 2022-01-17 15:34:51 +01:00
parent 59e9e7d7f1
commit 9d496d627f
20 changed files with 54 additions and 1620 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
.gitignore vendored
View File

@ -21,3 +21,4 @@ wpa_supplicant-0.6.8.tar.gz
/wpa_supplicant-2.7.tar.gz
/wpa_supplicant-2.8.tar.gz
/wpa_supplicant-2.9.tar.gz
/wpa_supplicant-2.10.tar.gz

73
0001-AP-Silently-ignore-management-frame-from-unexpected-.patch
View File

@ -1,73 +0,0 @@
From 8c07fa9eda13e835f3f968b2e1c9a8be3a851ff9 Mon Sep 17 00:00:00 2001
From: Jouni Malinen <j@w1.fi>
Date: Thu, 29 Aug 2019 11:52:04 +0300
Subject: [PATCH] AP: Silently ignore management frame from unexpected source
address
Do not process any received Management frames with unexpected/invalid SA
so that we do not add any state for unexpected STA addresses or end up
sending out frames to unexpected destination. This prevents unexpected
sequences where an unprotected frame might end up causing the AP to send
out a response to another device and that other device processing the
unexpected response.
In particular, this prevents some potential denial of service cases
where the unexpected response frame from the AP might result in a
connected station dropping its association.
Signed-off-by: Jouni Malinen <j@w1.fi>
---
src/ap/drv_callbacks.c | 13 +++++++++++++
src/ap/ieee802_11.c | 12 ++++++++++++
2 files changed, 25 insertions(+)
diff --git a/src/ap/drv_callbacks.c b/src/ap/drv_callbacks.c
index 31587685fe3b..34ca379edc3d 100644
--- a/src/ap/drv_callbacks.c
+++ b/src/ap/drv_callbacks.c
@@ -131,6 +131,19 @@ int hostapd_notif_assoc(struct hostapd_data *hapd, const u8 *addr,
"hostapd_notif_assoc: Skip event with no address");
return -1;
}
+
+ if (is_multicast_ether_addr(addr) ||
+ is_zero_ether_addr(addr) ||
+ os_memcmp(addr, hapd->own_addr, ETH_ALEN) == 0) {
+ /* Do not process any frames with unexpected/invalid SA so that
+ * we do not add any state for unexpected STA addresses or end
+ * up sending out frames to unexpected destination. */
+ wpa_printf(MSG_DEBUG, "%s: Invalid SA=" MACSTR
+ " in received indication - ignore this indication silently",
+ __func__, MAC2STR(addr));
+ return 0;
+ }
+
random_add_randomness(addr, ETH_ALEN);
hostapd_logger(hapd, addr, HOSTAPD_MODULE_IEEE80211,
diff --git a/src/ap/ieee802_11.c b/src/ap/ieee802_11.c
index c85a28db44b7..e7065372e158 100644
--- a/src/ap/ieee802_11.c
+++ b/src/ap/ieee802_11.c
@@ -4626,6 +4626,18 @@ int ieee802_11_mgmt(struct hostapd_data *hapd, const u8 *buf, size_t len,
fc = le_to_host16(mgmt->frame_control);
stype = WLAN_FC_GET_STYPE(fc);
+ if (is_multicast_ether_addr(mgmt->sa) ||
+ is_zero_ether_addr(mgmt->sa) ||
+ os_memcmp(mgmt->sa, hapd->own_addr, ETH_ALEN) == 0) {
+ /* Do not process any frames with unexpected/invalid SA so that
+ * we do not add any state for unexpected STA addresses or end
+ * up sending out frames to unexpected destination. */
+ wpa_printf(MSG_DEBUG, "MGMT: Invalid SA=" MACSTR
+ " in received frame - ignore this frame silently",
+ MAC2STR(mgmt->sa));
+ return 0;
+ }
+
if (stype == WLAN_FC_STYPE_BEACON) {
handle_beacon(hapd, mgmt, len, fi);
return 1;
--
2.20.1

90
0001-Check-for-FT-support-when-selecting-FT-suites.patch
View File

@ -1,90 +0,0 @@
From cee97564dcd3df002a29fc79107248011699fca7 Mon Sep 17 00:00:00 2001
From: Matthew Wang <matthewmwang@chromium.org>
Date: Mon, 3 Feb 2020 17:12:05 -0800
Subject: [PATCH] Check for FT support when selecting FT suites
A driver supports FT if it either supports SME or the
NL80211_CMD_UPDATE_FT_IES command. When selecting AKM suites,
wpa_supplicant currently doesn't take into account whether or not either
of those conditions are met. This can cause association failures, e.g.,
when an AP supports both WPA-EAP and FT-EAP but the driver doesn't
support FT (wpa_supplicant will decide to do FT-EAP since it is unaware
the driver doesn't support it). This change allows an FT suite to be
selected only when the driver also supports FT.
Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
---
src/drivers/driver.h | 6 ++++++
src/drivers/driver_nl80211_capa.c | 7 +++++++
wpa_supplicant/wpa_supplicant.c | 5 +++++
3 files changed, 18 insertions(+)
diff --git a/src/drivers/driver.h b/src/drivers/driver.h
index 2a8459ae3..f48074c83 100644
--- a/src/drivers/driver.h
+++ b/src/drivers/driver.h
@@ -1659,6 +1659,12 @@ struct wpa_driver_capa {
#define WPA_DRIVER_FLAGS_FTM_RESPONDER 0x0100000000000000ULL
/** Driver support 4-way handshake offload for WPA-Personal */
#define WPA_DRIVER_FLAGS_4WAY_HANDSHAKE_PSK 0x0200000000000000ULL
+/** Driver supports a separate control port for EAPOL frames */
+#define WPA_DRIVER_FLAGS_CONTROL_PORT 0x0400000000000000ULL
+/** Driver supports VLAN offload */
+#define WPA_DRIVER_FLAGS_VLAN_OFFLOAD 0x0800000000000000ULL
+/** Driver supports UPDATE_FT_IES command */
+#define WPA_DRIVER_FLAGS_UPDATE_FT_IES 0x1000000000000000ULL
u64 flags;
#define FULL_AP_CLIENT_STATE_SUPP(drv_flags) \
diff --git a/src/drivers/driver_nl80211_capa.c b/src/drivers/driver_nl80211_capa.c
index 8318b10ab..2137b297f 100644
--- a/src/drivers/driver_nl80211_capa.c
+++ b/src/drivers/driver_nl80211_capa.c
@@ -78,6 +78,7 @@ struct wiphy_info_data {
unsigned int wmm_ac_supported:1;
unsigned int mac_addr_rand_scan_supported:1;
unsigned int mac_addr_rand_sched_scan_supported:1;
+ unsigned int update_ft_ies_supported:1;
};
@@ -243,6 +244,9 @@ static void wiphy_info_supp_cmds(struct wiphy_info_data *info,
case NL80211_CMD_SET_QOS_MAP:
info->set_qos_map_supported = 1;
break;
+ case NL80211_CMD_UPDATE_FT_IES:
+ info->update_ft_ies_supported = 1;
+ break;
}
}
}
@@ -901,6 +905,9 @@ static int wpa_driver_nl80211_get_info(struct wpa_driver_nl80211_data *drv,
drv->capa.max_sched_scan_plan_iterations = 0;
}
+ if (info->update_ft_ies_supported)
+ drv->capa.flags |= WPA_DRIVER_FLAGS_UPDATE_FT_IES;
+
return 0;
}
diff --git a/wpa_supplicant/wpa_supplicant.c b/wpa_supplicant/wpa_supplicant.c
index f4a81a835..57230f358 100644
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
@@ -1410,6 +1410,11 @@ int wpa_supplicant_set_suites(struct wpa_supplicant *wpa_s,
if (!(wpa_s->drv_flags & WPA_DRIVER_FLAGS_SAE))
sel &= ~(WPA_KEY_MGMT_SAE | WPA_KEY_MGMT_FT_SAE);
#endif /* CONFIG_SAE */
+#ifdef CONFIG_IEEE80211R
+ if (!(wpa_s->drv_flags & (WPA_DRIVER_FLAGS_SME |
+ WPA_DRIVER_FLAGS_UPDATE_FT_IES)))
+ sel &= ~WPA_KEY_MGMT_FT;
+#endif /* CONFIG_IEEE80211R */
if (0) {
#ifdef CONFIG_IEEE80211R
#ifdef CONFIG_SHA384
--
2.31.1

200
0001-D-Bus-Allow-changing-an-interface-bridge-via-D-Bus.patch
View File

@ -1,200 +0,0 @@
From 1c58317f56e312576b6872440f125f794e45f991 Mon Sep 17 00:00:00 2001
Message-Id: <1c58317f56e312576b6872440f125f794e45f991.1602774933.git.davide.caratti@gmail.com>
From: Beniamino Galvani <bgalvani@redhat.com>
Date: Wed, 30 Sep 2020 18:34:36 +0200
Subject: [PATCH] D-Bus: Allow changing an interface bridge via D-Bus
D-Bus clients can call CreateInterface() once and use the resulting
Interface object to connect multiple times to different networks.
However, if the network interface gets added to a bridge, clients
currently have to remove the Interface object and create a new one.
Improve this by supporting the change of the BridgeIfname property of
an existing Interface object.
Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
---
src/rsn_supp/tdls.c | 5 +++
wpa_supplicant/dbus/dbus_new.c | 2 +-
wpa_supplicant/dbus/dbus_new_handlers.c | 37 ++++++++++++++++
wpa_supplicant/dbus/dbus_new_handlers.h | 1 +
wpa_supplicant/wpa_supplicant.c | 59 +++++++++++++++++++++++++
wpa_supplicant/wpa_supplicant_i.h | 2 +
6 files changed, 105 insertions(+), 1 deletion(-)
diff --git a/src/rsn_supp/tdls.c b/src/rsn_supp/tdls.c
index 7b47e3ac5..eff8cd829 100644
--- a/src/rsn_supp/tdls.c
+++ b/src/rsn_supp/tdls.c
@@ -2807,6 +2807,11 @@ int wpa_tdls_init(struct wpa_sm *sm)
if (sm == NULL)
return -1;
+ if (sm->l2_tdls) {
+ l2_packet_deinit(sm->l2_tdls);
+ sm->l2_tdls = NULL;
+ }
+
sm->l2_tdls = l2_packet_init(sm->bridge_ifname ? sm->bridge_ifname :
sm->ifname,
sm->own_addr,
diff --git a/wpa_supplicant/dbus/dbus_new.c b/wpa_supplicant/dbus/dbus_new.c
index 793a881ef..ab7628f87 100644
--- a/wpa_supplicant/dbus/dbus_new.c
+++ b/wpa_supplicant/dbus/dbus_new.c
@@ -3613,7 +3613,7 @@ static const struct wpa_dbus_property_desc wpas_dbus_interface_properties[] = {
},
{ "BridgeIfname", WPAS_DBUS_NEW_IFACE_INTERFACE, "s",
wpas_dbus_getter_bridge_ifname,
- NULL,
+ wpas_dbus_setter_bridge_ifname,
NULL
},
{ "ConfigFile", WPAS_DBUS_NEW_IFACE_INTERFACE, "s",
diff --git a/wpa_supplicant/dbus/dbus_new_handlers.c b/wpa_supplicant/dbus/dbus_new_handlers.c
index 34abab752..2cfc87fa8 100644
--- a/wpa_supplicant/dbus/dbus_new_handlers.c
+++ b/wpa_supplicant/dbus/dbus_new_handlers.c
@@ -3635,6 +3635,43 @@ dbus_bool_t wpas_dbus_getter_bridge_ifname(
}
+dbus_bool_t wpas_dbus_setter_bridge_ifname(
+ const struct wpa_dbus_property_desc *property_desc,
+ DBusMessageIter *iter, DBusError *error, void *user_data)
+{
+ struct wpa_supplicant *wpa_s = user_data;
+ const char *bridge_ifname = NULL;
+ const char *msg;
+ int r;
+
+ if (!wpas_dbus_simple_property_setter(iter, error, DBUS_TYPE_STRING,
+ &bridge_ifname))
+ return FALSE;
+
+ r = wpa_supplicant_update_bridge_ifname(wpa_s, bridge_ifname);
+ if (r != 0) {
+ switch (r) {
+ case -EINVAL:
+ msg = "invalid interface name";
+ break;
+ case -EBUSY:
+ msg = "interface is busy";
+ break;
+ case -EIO:
+ msg = "socket error";
+ break;
+ default:
+ msg = "unknown error";
+ break;
+ }
+ dbus_set_error_const(error, DBUS_ERROR_FAILED, msg);
+ return FALSE;
+ }
+
+ return TRUE;
+}
+
+
/**
* wpas_dbus_getter_config_file - Get interface configuration file path
* @iter: Pointer to incoming dbus message iter
diff --git a/wpa_supplicant/dbus/dbus_new_handlers.h b/wpa_supplicant/dbus/dbus_new_handlers.h
index afa26efed..d528c0816 100644
--- a/wpa_supplicant/dbus/dbus_new_handlers.h
+++ b/wpa_supplicant/dbus/dbus_new_handlers.h
@@ -167,6 +167,7 @@ DECLARE_ACCESSOR(wpas_dbus_setter_scan_interval);
DECLARE_ACCESSOR(wpas_dbus_getter_ifname);
DECLARE_ACCESSOR(wpas_dbus_getter_driver);
DECLARE_ACCESSOR(wpas_dbus_getter_bridge_ifname);
+DECLARE_ACCESSOR(wpas_dbus_setter_bridge_ifname);
DECLARE_ACCESSOR(wpas_dbus_getter_config_file);
DECLARE_ACCESSOR(wpas_dbus_getter_current_bss);
DECLARE_ACCESSOR(wpas_dbus_getter_current_network);
diff --git a/wpa_supplicant/wpa_supplicant.c b/wpa_supplicant/wpa_supplicant.c
index 39e92fb68..a7e9e459e 100644
--- a/wpa_supplicant/wpa_supplicant.c
+++ b/wpa_supplicant/wpa_supplicant.c
@@ -4906,6 +4906,65 @@ static void wpa_supplicant_rx_eapol_bridge(void *ctx, const u8 *src_addr,
}
+int wpa_supplicant_update_bridge_ifname(struct wpa_supplicant *wpa_s,
+ const char *bridge_ifname)
+{
+ if (wpa_s->wpa_state > WPA_SCANNING)
+ return -EBUSY;
+
+ if (bridge_ifname &&
+ os_strlen(bridge_ifname) >= sizeof(wpa_s->bridge_ifname))
+ return -EINVAL;
+
+ if (!bridge_ifname)
+ bridge_ifname = "";
+
+ if (os_strcmp(wpa_s->bridge_ifname, bridge_ifname) == 0)
+ return 0;
+
+ if (wpa_s->l2_br) {
+ l2_packet_deinit(wpa_s->l2_br);
+ wpa_s->l2_br = NULL;
+ }
+
+ os_strlcpy(wpa_s->bridge_ifname, bridge_ifname,
+ sizeof(wpa_s->bridge_ifname));
+
+ if (wpa_s->bridge_ifname[0]) {
+ wpa_dbg(wpa_s, MSG_DEBUG,
+ "Receiving packets from bridge interface '%s'",
+ wpa_s->bridge_ifname);
+ wpa_s->l2_br = l2_packet_init_bridge(
+ wpa_s->bridge_ifname, wpa_s->ifname, wpa_s->own_addr,
+ ETH_P_EAPOL, wpa_supplicant_rx_eapol_bridge, wpa_s, 1);
+ if (!wpa_s->l2_br) {
+ wpa_msg(wpa_s, MSG_ERROR,
+ "Failed to open l2_packet connection for the bridge interface '%s'",
+ wpa_s->bridge_ifname);
+ goto fail;
+ }
+ }
+
+#ifdef CONFIG_TDLS
+ if (!wpa_s->p2p_mgmt && wpa_tdls_init(wpa_s->wpa))
+ goto fail;
+#endif /* CONFIG_TDLS */
+
+ return 0;
+fail:
+ wpa_s->bridge_ifname[0] = 0;
+ if (wpa_s->l2_br) {
+ l2_packet_deinit(wpa_s->l2_br);
+ wpa_s->l2_br = NULL;
+ }
+#ifdef CONFIG_TDLS
+ if (!wpa_s->p2p_mgmt)
+ wpa_tdls_init(wpa_s->wpa);
+#endif /* CONFIG_TDLS */
+ return -EIO;
+}
+
+
/**
* wpa_supplicant_driver_init - Initialize driver interface parameters
* @wpa_s: Pointer to wpa_supplicant data
diff --git a/wpa_supplicant/wpa_supplicant_i.h b/wpa_supplicant/wpa_supplicant_i.h
index 31a9b7427..eac3491cc 100644
--- a/wpa_supplicant/wpa_supplicant_i.h
+++ b/wpa_supplicant/wpa_supplicant_i.h
@@ -1351,6 +1351,8 @@ int wpa_supplicant_reload_configuration(struct wpa_supplicant *wpa_s);
const char * wpa_supplicant_state_txt(enum wpa_states state);
int wpa_supplicant_update_mac_addr(struct wpa_supplicant *wpa_s);
int wpa_supplicant_driver_init(struct wpa_supplicant *wpa_s);
+int wpa_supplicant_update_bridge_ifname(struct wpa_supplicant *wpa_s,
+ const char *bridge_ifname);
int wpa_supplicant_set_suites(struct wpa_supplicant *wpa_s,
struct wpa_bss *bss, struct wpa_ssid *ssid,
u8 *wpa_ie, size_t *wpa_ie_len);
--
2.26.2

209
0001-D-Bus-Fix-P2P-NULL-dereference-after-interface-remov.patch
View File

@ -1,209 +0,0 @@
From b2ad4e6b24ed0271ca76cb27856def0a701fb778 Mon Sep 17 00:00:00 2001
From: Davide Caratti <davide.caratti@gmail.com>
Date: Wed, 2 Oct 2019 14:08:41 +0200
Subject: [PATCH] D-Bus: Fix P2P NULL dereference after interface removal
When the P2P management interface is deleted, P2P is then disabled and
global->p2p_init_wpa_s is set to NULL. After that, other interfaces can
still trigger P2P functions (like wpas_p2p_find()) using D-Bus. This
makes wpa_supplicant terminate with SIGSEGV, because it dereferences a
NULL pointer. Fix this by adding proper checks, like it's done with
wpa_cli.
CC: Beniamino Galvani <bgalvani@redhat.com>
CC: Benjamin Berg <benjamin@sipsolutions.net>
Reported-by: Vladimir Benes <vbenes@redhat.com>
Signed-off-by: Davide Caratti <davide.caratti@gmail.com>
---
wpa_supplicant/dbus/dbus_new_handlers_p2p.c | 69 ++++++++++++++++++++-
1 file changed, 67 insertions(+), 2 deletions(-)
diff --git a/wpa_supplicant/dbus/dbus_new_handlers_p2p.c b/wpa_supplicant/dbus/dbus_new_handlers_p2p.c
index 8cdd88564..19715eb4c 100644
--- a/wpa_supplicant/dbus/dbus_new_handlers_p2p.c
+++ b/wpa_supplicant/dbus/dbus_new_handlers_p2p.c
@@ -40,6 +40,14 @@ static int wpas_dbus_validate_dbus_ipaddr(struct wpa_dbus_dict_entry entry)
}
+static dbus_bool_t no_p2p_mgmt_interface(DBusError *error)
+{
+ dbus_set_error_const(error, WPAS_DBUS_ERROR_IFACE_UNKNOWN,
+ "Could not find P2P mgmt interface");
+ return FALSE;
+}
+
+
/**
* Parses out the mac address from the peer object path.
* @peer_path - object path of the form
@@ -78,6 +86,22 @@ wpas_dbus_error_persistent_group_unknown(DBusMessage *message)
}
+/**
+ * wpas_dbus_error_no_p2p_mgmt_iface - Return a new InterfaceUnknown error
+ * message
+ * @message: Pointer to incoming dbus message this error refers to
+ * Returns: a dbus error message
+ *
+ * Convenience function to create and return an unknown interface error.
+ */
+static DBusMessage * wpas_dbus_error_no_p2p_mgmt_iface(DBusMessage *message)
+{
+ wpa_printf(MSG_DEBUG, "dbus: Could not find P2P mgmt interface");
+ return dbus_message_new_error(message, WPAS_DBUS_ERROR_IFACE_UNKNOWN,
+ "Could not find P2P mgmt interface");
+}
+
+
DBusMessage * wpas_dbus_handler_p2p_find(DBusMessage *message,
struct wpa_supplicant *wpa_s)
{
@@ -145,6 +169,10 @@ DBusMessage * wpas_dbus_handler_p2p_find(DBusMessage *message,
}
wpa_s = wpa_s->global->p2p_init_wpa_s;
+ if (!wpa_s) {
+ reply = wpas_dbus_error_no_p2p_mgmt_iface(message);
+ goto error_nop2p;
+ }
if (wpas_p2p_find(wpa_s, timeout, type, num_req_dev_types,
req_dev_types, NULL, 0, 0, NULL, freq))
@@ -157,8 +185,9 @@ DBusMessage * wpas_dbus_handler_p2p_find(DBusMessage *message,
error_clear:
wpa_dbus_dict_entry_clear(&entry);
error:
- os_free(req_dev_types);
reply = wpas_dbus_error_invalid_args(message, entry.key);
+error_nop2p:
+ os_free(req_dev_types);
return reply;
}
@@ -166,7 +195,9 @@ error:
DBusMessage * wpas_dbus_handler_p2p_stop_find(DBusMessage *message,
struct wpa_supplicant *wpa_s)
{
- wpas_p2p_stop_find(wpa_s->global->p2p_init_wpa_s);
+ wpa_s = wpa_s->global->p2p_init_wpa_s;
+ if (wpa_s)
+ wpas_p2p_stop_find(wpa_s);
return NULL;
}
@@ -185,6 +216,8 @@ DBusMessage * wpas_dbus_handler_p2p_rejectpeer(DBusMessage *message,
return wpas_dbus_error_invalid_args(message, NULL);
wpa_s = wpa_s->global->p2p_init_wpa_s;
+ if (!wpa_s)
+ return wpas_dbus_error_no_p2p_mgmt_iface(message);
if (wpas_p2p_reject(wpa_s, peer_addr) < 0)
return wpas_dbus_error_unknown_error(message,
@@ -204,6 +237,8 @@ DBusMessage * wpas_dbus_handler_p2p_listen(DBusMessage *message,
return wpas_dbus_error_no_memory(message);
wpa_s = wpa_s->global->p2p_init_wpa_s;
+ if (!wpa_s)
+ return wpas_dbus_error_no_p2p_mgmt_iface(message);
if (wpas_p2p_listen(wpa_s, (unsigned int) timeout)) {
return dbus_message_new_error(message,
@@ -245,6 +280,8 @@ DBusMessage * wpas_dbus_handler_p2p_extendedlisten(
}
wpa_s = wpa_s->global->p2p_init_wpa_s;
+ if (!wpa_s)
+ return wpas_dbus_error_no_p2p_mgmt_iface(message);
if (wpas_p2p_ext_listen(wpa_s, period, interval))
return wpas_dbus_error_unknown_error(
@@ -350,6 +387,10 @@ DBusMessage * wpas_dbus_handler_p2p_group_add(DBusMessage *message,
}
wpa_s = wpa_s->global->p2p_init_wpa_s;
+ if (!wpa_s) {
+ reply = wpas_dbus_error_no_p2p_mgmt_iface(message);
+ goto out;
+ }
if (pg_object_path != NULL) {
char *net_id_str;
@@ -433,6 +474,12 @@ static dbus_bool_t wpa_dbus_p2p_check_enabled(struct wpa_supplicant *wpa_s,
"P2P is not available for this interface");
return FALSE;
}
+ if (!wpa_s->global->p2p_init_wpa_s) {
+ if (out_reply)
+ *out_reply = wpas_dbus_error_no_p2p_mgmt_iface(
+ message);
+ return no_p2p_mgmt_interface(error);
+ }
return TRUE;
}
@@ -822,6 +869,8 @@ DBusMessage * wpas_dbus_handler_p2p_prov_disc_req(DBusMessage *message,
return wpas_dbus_error_invalid_args(message, NULL);
wpa_s = wpa_s->global->p2p_init_wpa_s;
+ if (!wpa_s)
+ return wpas_dbus_error_no_p2p_mgmt_iface(message);
if (wpas_p2p_prov_disc(wpa_s, peer_addr, config_method,
WPAS_P2P_PD_FOR_GO_NEG, NULL) < 0)
@@ -1882,6 +1931,8 @@ dbus_bool_t wpas_dbus_getter_p2p_peer_groups(
wpa_s = peer_args->wpa_s;
wpa_s = wpa_s->global->p2p_init_wpa_s;
+ if (!wpa_s)
+ return no_p2p_mgmt_interface(error);
wpa_s_go = wpas_get_p2p_client_iface(wpa_s, info->p2p_device_addr);
if (wpa_s_go) {
@@ -1963,6 +2014,9 @@ dbus_bool_t wpas_dbus_getter_persistent_groups(
dbus_bool_t success = FALSE;
wpa_s = wpa_s->global->p2p_init_wpa_s;
+ if (!wpa_s)
+ return no_p2p_mgmt_interface(error);
+
if (!wpa_s->parent->dbus_new_path)
return FALSE;
@@ -2077,6 +2131,11 @@ DBusMessage * wpas_dbus_handler_add_persistent_group(
dbus_message_iter_init(message, &iter);
wpa_s = wpa_s->global->p2p_init_wpa_s;
+ if (!wpa_s) {
+ reply = wpas_dbus_error_no_p2p_mgmt_iface(message);
+ goto err;
+ }
+
if (wpa_s->parent->dbus_new_path)
ssid = wpa_config_add_network(wpa_s->conf);
if (ssid == NULL) {
@@ -2159,6 +2218,10 @@ DBusMessage * wpas_dbus_handler_remove_persistent_group(
DBUS_TYPE_INVALID);
wpa_s = wpa_s->global->p2p_init_wpa_s;
+ if (!wpa_s) {
+ reply = wpas_dbus_error_no_p2p_mgmt_iface(message);
+ goto out;
+ }
/*
* Extract the network ID and ensure the network is actually a child of
@@ -2235,6 +2298,8 @@ DBusMessage * wpas_dbus_handler_remove_all_persistent_groups(
struct wpa_config *config;
wpa_s = wpa_s->global->p2p_init_wpa_s;
+ if (!wpa_s)
+ return wpas_dbus_error_no_p2p_mgmt_iface(message);
config = wpa_s->conf;
ssid = config->ssid;
--
2.26.2

110
0001-EAP-TTLS-PEAP-peer-Fix-failure-when-using-session-ti.patch
View File

@ -1,110 +0,0 @@
From 872609c15110d32ee2d306aeeeffdd4e42ef6fc6 Mon Sep 17 00:00:00 2001
Message-Id: <872609c15110d32ee2d306aeeeffdd4e42ef6fc6.1627507211.git.davide.caratti@gmail.com>
From: Alexander Clouter <alex@digriz.org.uk>
Date: Fri, 16 Oct 2020 09:49:36 +0100
Subject: [PATCH] EAP-TTLS/PEAP peer: Fix failure when using session tickets
under TLS 1.3
EAP peer does not expect data present when beginning the Phase 2 in
EAP-{TTLS,PEAP} but in TLS 1.3 session tickets are sent after the
handshake completes.
There are several strategies that can be used to handle this, but this
patch picks up from the discussion[1] and implements the proposed use of
SSL_MODE_AUTO_RETRY. SSL_MODE_AUTO_RETRY has already been enabled by
default in OpenSSL 1.1.1, but it needs to be enabled for older versions.
The main OpenSSL wrapper change in tls_connection_decrypt() takes care
of the new possible case with SSL_MODE_AUTO_RETRY for
SSL_ERROR_WANT_READ to indicate that a non-application_data was
processed. That is not really an error case with TLS 1.3, so allow it to
complete and return an empty decrypted application data buffer.
EAP-PEAP/TTLS processing can then use this to move ahead with starting
Phase 2.
[1] https://www.spinics.net/lists/hostap/msg05376.html
Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
---
src/crypto/tls_openssl.c | 18 ++++++++++++++----
src/eap_peer/eap_peap.c | 4 ++++
src/eap_peer/eap_ttls.c | 5 +++++
3 files changed, 23 insertions(+), 4 deletions(-)
diff --git a/src/crypto/tls_openssl.c b/src/crypto/tls_openssl.c
index ef872c50e..345a35ee1 100644
--- a/src/crypto/tls_openssl.c
+++ b/src/crypto/tls_openssl.c
@@ -1045,6 +1045,8 @@ void * tls_init(const struct tls_config *conf)
SSL_CTX_set_options(ssl, SSL_OP_NO_SSLv2);
SSL_CTX_set_options(ssl, SSL_OP_NO_SSLv3);
+ SSL_CTX_set_mode(ssl, SSL_MODE_AUTO_RETRY);
+
#ifdef SSL_MODE_NO_AUTO_CHAIN
/* Number of deployed use cases assume the default OpenSSL behavior of
* auto chaining the local certificate is in use. BoringSSL removed this
@@ -4543,10 +4545,18 @@ struct wpabuf * tls_connection_decrypt(void *tls_ctx,
return NULL;
res = SSL_read(conn->ssl, wpabuf_mhead(buf), wpabuf_size(buf));
if (res < 0) {
- tls_show_errors(MSG_INFO, __func__,
- "Decryption failed - SSL_read");
- wpabuf_free(buf);
- return NULL;
+ int err = SSL_get_error(conn->ssl, res);
+
+ if (err == SSL_ERROR_WANT_READ) {
+ wpa_printf(MSG_DEBUG,
+ "SSL: SSL_connect - want more data");
+ res = 0;
+ } else {
+ tls_show_errors(MSG_INFO, __func__,
+ "Decryption failed - SSL_read");
+ wpabuf_free(buf);
+ return NULL;
+ }
}
wpabuf_put(buf, res);
diff --git a/src/eap_peer/eap_peap.c b/src/eap_peer/eap_peap.c
index 7c3704369..a13428d37 100644
--- a/src/eap_peer/eap_peap.c
+++ b/src/eap_peer/eap_peap.c
@@ -803,6 +803,10 @@ static int eap_peap_decrypt(struct eap_sm *sm, struct eap_peap_data *data,
res = eap_peer_tls_decrypt(sm, &data->ssl, in_data, &in_decrypted);
if (res)
return res;
+ if (wpabuf_len(in_decrypted) == 0) {
+ wpabuf_free(in_decrypted);
+ return 1;
+ }
continue_req:
wpa_hexdump_buf(MSG_DEBUG, "EAP-PEAP: Decrypted Phase 2 EAP",
diff --git a/src/eap_peer/eap_ttls.c b/src/eap_peer/eap_ttls.c
index 642d179c6..3bf1e97e6 100644
--- a/src/eap_peer/eap_ttls.c
+++ b/src/eap_peer/eap_ttls.c
@@ -1441,6 +1441,7 @@ static int eap_ttls_decrypt(struct eap_sm *sm, struct eap_ttls_data *data,
if ((in_data == NULL || wpabuf_len(in_data) == 0) &&
data->phase2_start) {
+start:
return eap_ttls_phase2_start(sm, data, ret, identifier,
out_data);
}
@@ -1455,6 +1456,10 @@ static int eap_ttls_decrypt(struct eap_sm *sm, struct eap_ttls_data *data,
retval = eap_peer_tls_decrypt(sm, &data->ssl, in_data, &in_decrypted);
if (retval)
goto done;
+ if (wpabuf_len(in_decrypted) == 0) {
+ wpabuf_free(in_decrypted);
+ goto start;
+ }
continue_req:
data->phase2_start = 0;
--
2.31.1

66
0001-OpenSSL-Allow-systemwide-secpolicy-overrides-for-TLS.patch
View File

@ -1,66 +0,0 @@
From 9afb68b03976d019bb450e5e33b0d8e48867691c Mon Sep 17 00:00:00 2001
Message-Id: <9afb68b03976d019bb450e5e33b0d8e48867691c.1626202922.git.davide.caratti@gmail.com>
From: Jouni Malinen <jouni@codeaurora.org>
Date: Tue, 8 Sep 2020 17:55:36 +0300
Subject: [PATCH] OpenSSL: Allow systemwide secpolicy overrides for TLS version
Explicit configuration to enable TLS v1.0 and/or v1.1 did not work with
systemwide OpenSSL secpolicy=2 cases (e.g., Ubuntu 20.04). Allow such
systemwide configuration to be overridden if the older TLS versions have
been explicitly enabled in the network profile. The default behavior
follows the systemwide policy, but this allows compatibility with old
authentication servers without having to touch the systemwide policy.
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
src/crypto/tls_openssl.c | 26 +++++++++++++++++---------
1 file changed, 17 insertions(+), 9 deletions(-)
diff --git a/src/crypto/tls_openssl.c b/src/crypto/tls_openssl.c
index e73dd7f5b..f7dfecbbf 100644
--- a/src/crypto/tls_openssl.c
+++ b/src/crypto/tls_openssl.c
@@ -2995,16 +2995,12 @@ static int tls_set_conn_flags(struct tls_connection *conn, unsigned int flags,
/* Explicit request to enable TLS versions even if needing to
* override systemwide policies. */
- if (flags & TLS_CONN_ENABLE_TLSv1_0) {
+ if (flags & TLS_CONN_ENABLE_TLSv1_0)
version = TLS1_VERSION;
- } else if (flags & TLS_CONN_ENABLE_TLSv1_1) {
- if (!(flags & TLS_CONN_DISABLE_TLSv1_0))
- version = TLS1_1_VERSION;
- } else if (flags & TLS_CONN_ENABLE_TLSv1_2) {
- if (!(flags & (TLS_CONN_DISABLE_TLSv1_0 |
- TLS_CONN_DISABLE_TLSv1_1)))
- version = TLS1_2_VERSION;
- }
+ else if (flags & TLS_CONN_ENABLE_TLSv1_1)
+ version = TLS1_1_VERSION;
+ else if (flags & TLS_CONN_ENABLE_TLSv1_2)
+ version = TLS1_2_VERSION;
if (!version) {
wpa_printf(MSG_DEBUG,
"OpenSSL: Invalid TLS version configuration");
@@ -3018,6 +3014,18 @@ static int tls_set_conn_flags(struct tls_connection *conn, unsigned int flags,
}
}
#endif /* >= 1.1.0 */
+#if OPENSSL_VERSION_NUMBER >= 0x10100000L && \
+ !defined(LIBRESSL_VERSION_NUMBER) && \
+ !defined(OPENSSL_IS_BORINGSSL)
+ if ((flags & (TLS_CONN_ENABLE_TLSv1_0 | TLS_CONN_ENABLE_TLSv1_1)) &&
+ SSL_get_security_level(ssl) >= 2) {
+ /*
+ * Need to drop to security level 1 to allow TLS versions older
+ * than 1.2 to be used when explicitly enabled in configuration.
+ */
+ SSL_set_security_level(conn->ssl, 1);
+ }
+#endif
#ifdef CONFIG_SUITEB
#ifdef OPENSSL_IS_BORINGSSL
--
2.31.1

111
0001-P2P-Always-use-global-p2p_long_listen.patch
View File

@ -1,111 +0,0 @@
From 9ad3c12dd1bf56824ef8b3425e057e8d1e84e69d Mon Sep 17 00:00:00 2001
From: Benjamin Berg <bberg@redhat.com>
Date: Fri, 3 Jan 2020 22:18:51 +0100
Subject: [PATCH] P2P: Always use global p2p_long_listen
The p2p_long_listen value was set on the control wpa_s struct while in a
lot of cases it operated on the p2p struct. Explicitly use the global
p2p_init_wpa_s struct in cases where we might not be operating on it
already.
Without this, simply starting a p2p_listen operation (e.g., using
wpa_cli) will not work properly. As the p2p_long_listen is set on the
controlling interface and wpas_p2p_cancel_remain_on_channel_cb() uses
p2p_init_wpa_s, it would not actually work. This results in
wpa_supplicant stopping listening after the maximum remain-on-channel
time passes when using a separate P2P Device interface.
Signed-off-by: Benjamin Berg <bberg@redhat.com>
---
wpa_supplicant/p2p_supplicant.c | 19 ++++++++++---------
1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/wpa_supplicant/p2p_supplicant.c b/wpa_supplicant/p2p_supplicant.c
index 95bacec19..a7d3b7f1d 100644
--- a/wpa_supplicant/p2p_supplicant.c
+++ b/wpa_supplicant/p2p_supplicant.c
@@ -2422,7 +2422,7 @@ static void wpas_go_neg_completed(void *ctx, struct p2p_go_neg_results *res)
wpas_start_wps_enrollee(group_wpa_s, res);
}
- wpa_s->p2p_long_listen = 0;
+ wpa_s->global->p2p_init_wpa_s->p2p_long_listen = 0;
eloop_cancel_timeout(wpas_p2p_long_listen_timeout, wpa_s, NULL);
eloop_cancel_timeout(wpas_p2p_group_formation_timeout, wpa_s, NULL);
@@ -4750,7 +4750,8 @@ void wpas_p2p_deinit(struct wpa_supplicant *wpa_s)
eloop_cancel_timeout(wpas_p2p_psk_failure_removal, wpa_s, NULL);
eloop_cancel_timeout(wpas_p2p_group_formation_timeout, wpa_s, NULL);
eloop_cancel_timeout(wpas_p2p_join_scan, wpa_s, NULL);
- wpa_s->p2p_long_listen = 0;
+ if (wpa_s->global->p2p_init_wpa_s)
+ wpa_s->global->p2p_init_wpa_s->p2p_long_listen = 0;
eloop_cancel_timeout(wpas_p2p_long_listen_timeout, wpa_s, NULL);
eloop_cancel_timeout(wpas_p2p_group_idle_timeout, wpa_s, NULL);
wpas_p2p_remove_pending_group_interface(wpa_s);
@@ -5635,7 +5636,7 @@ int wpas_p2p_connect(struct wpa_supplicant *wpa_s, const u8 *peer_addr,
go_intent = wpa_s->conf->p2p_go_intent;
if (!auth)
- wpa_s->p2p_long_listen = 0;
+ wpa_s->global->p2p_init_wpa_s->p2p_long_listen = 0;
wpa_s->p2p_wps_method = wps_method;
wpa_s->p2p_persistent_group = !!persistent_group;
@@ -6952,7 +6953,7 @@ int wpas_p2p_find(struct wpa_supplicant *wpa_s, unsigned int timeout,
u8 seek_cnt, const char **seek_string, int freq)
{
wpas_p2p_clear_pending_action_tx(wpa_s);
- wpa_s->p2p_long_listen = 0;
+ wpa_s->global->p2p_init_wpa_s->p2p_long_listen = 0;
if (wpa_s->global->p2p_disabled || wpa_s->global->p2p == NULL ||
wpa_s->p2p_in_provisioning) {
@@ -6997,7 +6998,7 @@ static void wpas_p2p_scan_res_ignore_search(struct wpa_supplicant *wpa_s,
static void wpas_p2p_stop_find_oper(struct wpa_supplicant *wpa_s)
{
wpas_p2p_clear_pending_action_tx(wpa_s);
- wpa_s->p2p_long_listen = 0;
+ wpa_s->global->p2p_init_wpa_s->p2p_long_listen = 0;
eloop_cancel_timeout(wpas_p2p_long_listen_timeout, wpa_s, NULL);
eloop_cancel_timeout(wpas_p2p_join_scan, wpa_s, NULL);
@@ -7023,7 +7024,7 @@ void wpas_p2p_stop_find(struct wpa_supplicant *wpa_s)
static void wpas_p2p_long_listen_timeout(void *eloop_ctx, void *timeout_ctx)
{
struct wpa_supplicant *wpa_s = eloop_ctx;
- wpa_s->p2p_long_listen = 0;
+ wpa_s->global->p2p_init_wpa_s->p2p_long_listen = 0;
}
@@ -7052,7 +7053,7 @@ int wpas_p2p_listen(struct wpa_supplicant *wpa_s, unsigned int timeout)
timeout = 3600;
}
eloop_cancel_timeout(wpas_p2p_long_listen_timeout, wpa_s, NULL);
- wpa_s->p2p_long_listen = 0;
+ wpa_s->global->p2p_init_wpa_s->p2p_long_listen = 0;
/*
* Stop previous find/listen operation to avoid trying to request a new
@@ -7064,7 +7065,7 @@ int wpas_p2p_listen(struct wpa_supplicant *wpa_s, unsigned int timeout)
res = wpas_p2p_listen_start(wpa_s, timeout * 1000);
if (res == 0 && timeout * 1000 > wpa_s->max_remain_on_chan) {
- wpa_s->p2p_long_listen = timeout * 1000;
+ wpa_s->global->p2p_init_wpa_s->p2p_long_listen = timeout * 1000;
eloop_register_timeout(timeout, 0,
wpas_p2p_long_listen_timeout,
wpa_s, NULL);
@@ -7171,7 +7172,7 @@ static void wpas_p2p_group_deinit(struct wpa_supplicant *wpa_s)
int wpas_p2p_reject(struct wpa_supplicant *wpa_s, const u8 *addr)
{
- wpa_s->p2p_long_listen = 0;
+ wpa_s->global->p2p_init_wpa_s->p2p_long_listen = 0;
if (wpa_s->global->p2p_disabled || wpa_s->global->p2p == NULL)
return -1;
--
2.26.2

50
0001-P2P-Fix-a-corner-case-in-peer-addition-based-on-PD-R.patch
View File

@ -1,50 +0,0 @@
From 8460e3230988ef2ec13ce6b69b687e941f6cdb32 Mon Sep 17 00:00:00 2001
From: Jouni Malinen <jouni@codeaurora.org>
Date: Tue, 8 Dec 2020 23:52:50 +0200
Subject: [PATCH] P2P: Fix a corner case in peer addition based on PD Request
p2p_add_device() may remove the oldest entry if there is no room in the
peer table for a new peer. This would result in any pointer to that
removed entry becoming stale. A corner case with an invalid PD Request
frame could result in such a case ending up using (read+write) freed
memory. This could only by triggered when the peer table has reached its
maximum size and the PD Request frame is received from the P2P Device
Address of the oldest remaining entry and the frame has incorrect P2P
Device Address in the payload.
Fix this by fetching the dev pointer again after having called
p2p_add_device() so that the stale pointer cannot be used.
Fixes: 17bef1e97a50 ("P2P: Add peer entry based on Provision Discovery Request")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
src/p2p/p2p_pd.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/src/p2p/p2p_pd.c b/src/p2p/p2p_pd.c
index 3994ec03f86b..05fd593494ef 100644
--- a/src/p2p/p2p_pd.c
+++ b/src/p2p/p2p_pd.c
@@ -595,14 +595,12 @@ void p2p_process_prov_disc_req(struct p2p_data *p2p, const u8 *sa,
goto out;
}
+ dev = p2p_get_device(p2p, sa);
if (!dev) {
- dev = p2p_get_device(p2p, sa);
- if (!dev) {
- p2p_dbg(p2p,
- "Provision Discovery device not found "
- MACSTR, MAC2STR(sa));
- goto out;
- }
+ p2p_dbg(p2p,
+ "Provision Discovery device not found "
+ MACSTR, MAC2STR(sa));
+ goto out;
}
} else if (msg.wfd_subelems) {
wpabuf_free(dev->info.wfd_subelems);
--
2.25.1

39
0001-P2P-Fix-copying-of-secondary-device-types-for-P2P-gr.patch
View File

@ -1,39 +0,0 @@
From 947272febe24a8f0ea828b5b2f35f13c3821901e Mon Sep 17 00:00:00 2001
Message-Id: <947272febe24a8f0ea828b5b2f35f13c3821901e.1612435525.git.davide.caratti@gmail.com>
From: Jouni Malinen <jouni@codeaurora.org>
Date: Mon, 9 Nov 2020 11:43:12 +0200
Subject: [PATCH] P2P: Fix copying of secondary device types for P2P group
client
Parsing and copying of WPS secondary device types list was verifying
that the contents is not too long for the internal maximum in the case
of WPS messages, but similar validation was missing from the case of P2P
group information which encodes this information in a different
attribute. This could result in writing beyond the memory area assigned
for these entries and corrupting memory within an instance of struct
p2p_device. This could result in invalid operations and unexpected
behavior when trying to free pointers from that corrupted memory.
Credit to OSS-Fuzz: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=27269
Fixes: e57ae6e19edf ("P2P: Keep track of secondary device types for peers")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
---
src/p2p/p2p.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/src/p2p/p2p.c b/src/p2p/p2p.c
index 74b7b52ae..5cbfc217f 100644
--- a/src/p2p/p2p.c
+++ b/src/p2p/p2p.c
@@ -453,6 +453,8 @@ static void p2p_copy_client_info(struct p2p_device *dev,
dev->info.config_methods = cli->config_methods;
os_memcpy(dev->info.pri_dev_type, cli->pri_dev_type, 8);
dev->info.wps_sec_dev_type_list_len = 8 * cli->num_sec_dev_types;
+ if (dev->info.wps_sec_dev_type_list_len > WPS_SEC_DEV_TYPE_MAX_LEN)
+ dev->info.wps_sec_dev_type_list_len = WPS_SEC_DEV_TYPE_MAX_LEN;
os_memcpy(dev->info.wps_sec_dev_type_list, cli->sec_dev_types,
dev->info.wps_sec_dev_type_list_len);
}
--
2.29.2

343
0001-add-sanity-tests-for-standalone-wpa_supplicant.patch
View File

@ -1,343 +0,0 @@
From c7e62303fb92f4608599a77ade315b9b5c9e161d Mon Sep 17 00:00:00 2001
Message-Id: <c7e62303fb92f4608599a77ade315b9b5c9e161d.1553704253.git.dcaratti@redhat.com>
From: Davide Caratti <dcaratti@redhat.com>
Date: Tue, 29 Jan 2019 19:01:59 +0100
Subject: [PATCH] add sanity tests for standalone wpa_supplicant
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
---
tests/tests.yml | 13 ++
tests/wpa_supplicant_standalone/Makefile | 63 ++++++
tests/wpa_supplicant_standalone/PURPOSE | 3 +
tests/wpa_supplicant_standalone/runtest.sh | 219 +++++++++++++++++++++
4 files changed, 298 insertions(+)
create mode 100644 tests/tests.yml
create mode 100644 tests/wpa_supplicant_standalone/Makefile
create mode 100644 tests/wpa_supplicant_standalone/PURPOSE
create mode 100755 tests/wpa_supplicant_standalone/runtest.sh
diff --git a/tests/tests.yml b/tests/tests.yml
new file mode 100644
index 0000000..bab9514
--- /dev/null
+++ b/tests/tests.yml
@@ -0,0 +1,13 @@
+---
+- hosts: localhost
+ roles:
+ - role: standard-test-beakerlib
+ tags:
+ - classic
+ tests:
+ - wpa_supplicant_standalone
+ required_packages:
+ - wpa_supplicant
+ - iproute
+ - iw
+ - util-linux
diff --git a/tests/wpa_supplicant_standalone/Makefile b/tests/wpa_supplicant_standalone/Makefile
new file mode 100644
index 0000000..c4bfe53
--- /dev/null
+++ b/tests/wpa_supplicant_standalone/Makefile
@@ -0,0 +1,63 @@
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+#
+# Makefile of /CoreOS/wpa_supplicant/Sanity/wpa_supplicant_standalone
+# Description: sanity test for wpa_supplicant
+# Author: Davide Caratti <dcaratti@redhat.com>
+#
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+#
+# Copyright (c) 2019 Red Hat, Inc.
+#
+# This program is free software: you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation, either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be
+# useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+# PURPOSE. See the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see http://www.gnu.org/licenses/.
+#
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+export TEST=/CoreOS/wpa_supplicant/Sanity/wpa_supplicant_standalone
+export TESTVERSION=1.0
+
+BUILT_FILES=
+
+FILES=$(METADATA) runtest.sh Makefile PURPOSE
+
+.PHONY: all install download clean
+
+run: $(FILES) build
+ ./runtest.sh
+
+build: $(BUILT_FILES)
+ test -x runtest.sh || chmod a+x runtest.sh
+
+clean:
+ rm -f *~ $(BUILT_FILES)
+
+
+include /usr/share/rhts/lib/rhts-make.include
+
+$(METADATA): Makefile
+ @echo "Owner: Davide Caratti <dcaratti@redhat.com>" > $(METADATA)
+ @echo "Name: $(TEST)" >> $(METADATA)
+ @echo "TestVersion: $(TESTVERSION)" >> $(METADATA)
+ @echo "Path: $(TEST_DIR)" >> $(METADATA)
+ @echo "Description: sanity test for wpa_supplicant" >> $(METADATA)
+ @echo "Type: Sanity" >> $(METADATA)
+ @echo "TestTime: 10m" >> $(METADATA)
+ @echo "RunFor: wpa_supplicant" >> $(METADATA)
+ @echo "Requires: util-linux iproute iw wpa_supplicant" >> $(METADATA)
+ @echo "Priority: Normal" >> $(METADATA)
+ @echo "License: GPLv2+" >> $(METADATA)
+ @echo "Confidential: no" >> $(METADATA)
+ @echo "Destructive: no" >> $(METADATA)
+ @echo "Releases: -RHEL4 -RHELClient5 -RHELServer5" >> $(METADATA)
+
+ rhts-lint $(METADATA)
diff --git a/tests/wpa_supplicant_standalone/PURPOSE b/tests/wpa_supplicant_standalone/PURPOSE
new file mode 100644
index 0000000..a183dc3
--- /dev/null
+++ b/tests/wpa_supplicant_standalone/PURPOSE
@@ -0,0 +1,3 @@
+PURPOSE of /CoreOS/wpa_supplicant/Sanity/wpa_supplicant_standalone
+Description: sanity test for wpa_supplicant
+Author: Davide Caratti <dcaratti@redhat.com>
diff --git a/tests/wpa_supplicant_standalone/runtest.sh b/tests/wpa_supplicant_standalone/runtest.sh
new file mode 100755
index 0000000..16390d8
--- /dev/null
+++ b/tests/wpa_supplicant_standalone/runtest.sh
@@ -0,0 +1,219 @@
+#!/bin/bash
+# vim: dict+=/usr/share/beakerlib/dictionary.vim cpt=.,w,b,u,t,i,k
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+#
+# runtest.sh of /CoreOS/wpa_supplicant/Sanity/wpa_supplicant_standalone
+# Description: sanity test for wpa_supplicant
+# Author: Davide Caratti <dcaratti@redhat.com>
+#
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+#
+# Copyright (c) 2019 Red Hat, Inc.
+#
+# This program is free software: you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation, either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be
+# useful, but WITHOUT ANY WARRANTY; without even the implied
+# warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+# PURPOSE. See the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see http://www.gnu.org/licenses/.
+#
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+# Include Beaker environment
+. /usr/bin/rhts-environment.sh || exit 1
+. /usr/share/beakerlib/beakerlib.sh || exit 1
+
+PACKAGE="wpa_supplicant"
+
+MACSTA="00:00:0a:bb:e1:1a"
+IFACEAP="wlan0"
+IFACESTA="wlan1"
+
+open_ap() {
+ local SSID=${1:-notreallyassid}
+
+ cat >openap.conf <<-EOF
+ network={
+ frequency=2412
+ ssid="$SSID"
+ mode=2
+ key_mgmt=NONE
+ }
+ EOF
+ wpa_supplicant -ddd -Dnl80211 -i$IFACEAP -copenap.conf -B -fopenap.log -Pw1ap.pid
+}
+
+open_sta() {
+ local SSID=${1:-notreallyassid}
+
+ cat >opensta.conf <<-EOF
+ network={
+ ssid="$SSID"
+ key_mgmt=NONE
+ }
+ EOF
+ wpa_supplicant -ddd -Dnl80211 -i$IFACESTA -copensta.conf -B -fopensta.log -Pw1sta.pid
+}
+
+wpa2psk_ap() {
+ local SSID=${1:-notreallyassid}
+
+ cat >wpapskap.conf <<-EOF
+ network={
+ frequency=2437
+ ssid="$SSID"
+ mode=2
+ key_mgmt=WPA-PSK
+ pairwise=CCMP
+ group=CCMP
+ psk="hunter2?"
+ }
+ EOF
+ wpa_supplicant -ddd -Dnl80211 -i$IFACEAP -cwpapskap.conf -B -fwpapskap.log -Pw2ap.pid
+}
+
+wpa2psk_sta() {
+ local SSID=${1:-notreallyassid}
+
+ cat >wpapsksta.conf <<-EOF
+ network={
+ frequency=2437
+ ssid="$SSID"
+ proto=WPA
+ key_mgmt=WPA-PSK
+ pairwise=CCMP
+ group=CCMP
+ psk="hunter2?"
+ }
+ EOF
+ wpa_supplicant -ddd -Dnl80211 -i$IFACESTA -cwpapsksta.conf -B -fwpapsksta.log -Pw2sta.pid
+}
+
+kill_supplicants() {
+ local a=`cat w*.pid`
+ local iter=0
+
+ while [ ${#a} -gt 0 -a $iter -lt 10 ]; do
+ for a in $a; do
+ kill $a 1>/dev/null 2>&1
+ sleep 1
+ done
+ a=`cat w*.pid`
+ iter=$((iter+1))
+ done
+
+ ip link set dev $IFACEAP down
+ ip link set dev $IFACESTA down
+
+ if [ $iter -ge 10 -a ${#a} -gt 0 ]; then
+ return 1
+ else
+ return 0
+ fi
+}
+
+check_for_associated_sta()
+{
+
+ local assoc_found=0 assoc_missed=0
+
+ ip link set dev $IFACEAP up
+ while sleep 2; do
+ if iw dev $IFACEAP station dump | grep -i $MACSTA ; then
+ assoc_found=$((assoc_found+1))
+ rlLog "found $MACSTA in $IFACEAP associations ($assoc_found)"
+ else
+ if [ $assoc_found -gt 0 ]; then
+ rlLog "association disappeared after $assoc_found cycles"
+ return 1
+ fi
+ rlLog "didn't find association ($assoc_missed)"
+ assoc_missed=$((assoc_missed+1))
+ fi
+ if [ $assoc_missed -gt 5 ]; then
+ rlLog "timeout waiting for $MACSTA in $IFACEAP station dump"
+ return 1
+ fi
+ if [ $assoc_found -gt 5 ]; then
+ return 0
+ fi
+ done
+ rlLog "sleep failed!"
+ return 1
+}
+
+check_for_running_aps()
+{
+ local probe_ok=0 probe_missed=0
+
+ ip link set dev $IFACESTA up
+ while sleep 1; do
+ if iw dev $IFACESTA scan | grep "${1:-notreallyassid}"; then
+ probe_ok=$((probe_ok+1))
+ rlLog "$probe_ok probe received"
+ else
+ if [ $probe_ok -gt 0 ]; then
+ rlLog "probe failure after $probe_ok attempts"
+ return 1
+ fi
+ rlLog "missed probe response"
+ probe_missed=$((probe_missed+1))
+ fi
+ if [ $probe_missed -gt 5 ]; then
+ rlLog "timeout waiting for beacons"
+ return 1
+ fi
+ if [ $probe_ok -gt 5 ]; then
+ return 0
+ fi
+ done
+ rlLog "sleep failed!"
+ return 1
+}
+
+rlJournalStart
+ rlPhaseStartSetup
+ rlAssertRpm $PACKAGE
+ # avoid randomizing MAC for wlan0 and wlan1
+ rlRun "systemctl stop NetworkManager"
+ # allow scans
+ rlRun "systemctl stop wpa_supplicant"
+ rlRun "rfkill unblock wifi"
+ rlRun "modprobe mac80211_hwsim radio=2"
+ rlRun "ip link set dev $IFACESTA address $MACSTA"
+ rlRun "TmpDir=\$(mktemp -d)" 0 "Creating tmp directory"
+ rlRun "pushd $TmpDir"
+ rlPhaseEnd
+
+ rlPhaseStartTest
+ # cleartext wifi
+ rlRun "kill_supplicants"
+ rlRun "open_ap test_OPEN"
+ rlRun "check_for_running_aps test_OPEN"
+ rlRun "open_sta test_OPEN"
+ rlRun "check_for_associated_sta test_OPEN"
+
+ # WPA2 personal
+ rlRun "kill_supplicants"
+ rlRun "wpa2psk_ap test_WPAPSK"
+ rlRun "check_for_running_aps test_WPAPSK"
+ rlRun "wpa2psk_sta test_WPAPSK"
+ rlRun "check_for_associated_sta test_WPAPSK"
+ rlPhaseEnd
+
+ rlPhaseStartCleanup
+ rlRun kill_supplicants
+ rlRun "popd"
+ rlRun "rm -r $TmpDir" 0 "Removing tmp directory"
+ rlRun "modprobe -r mac80211_hwsim"
+ rlRun "systemctl restart wpa_supplicant"
+ rlRun "systemctl restart NetworkManager"
+ rlPhaseEnd
+ rlJournalPrintText
+rlJournalEnd
--
2.20.1

62
0001-dbus-Export-OWE-capability-and-OWE-BSS-key_mgmt.patch
View File

@ -1,62 +0,0 @@
From 7800725afb27397f7d6033d4969e2aeb61af4737 Mon Sep 17 00:00:00 2001
Message-Id: <7800725afb27397f7d6033d4969e2aeb61af4737.1602780273.git.davide.caratti@gmail.com>
From: Beniamino Galvani <bgalvani@redhat.com>
Date: Sun, 13 Oct 2019 15:18:54 +0200
Subject: [PATCH] dbus: Export OWE capability and OWE BSS key_mgmt
Export a new 'owe' capability to indicate that wpa_supplicant was
built with OWE support and accepts 'key_mgmt=OWE'. Also, support 'owe'
in the array of BSS' available key managements.
Signed-off-by: Beniamino Galvani <bgalvani@redhat.com>
---
wpa_supplicant/dbus/dbus_new_handlers.c | 12 +++++++++---
1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/wpa_supplicant/dbus/dbus_new_handlers.c b/wpa_supplicant/dbus/dbus_new_handlers.c
index d2c84e5c5..1206c3cde 100644
--- a/wpa_supplicant/dbus/dbus_new_handlers.c
+++ b/wpa_supplicant/dbus/dbus_new_handlers.c
@@ -984,8 +984,7 @@ dbus_bool_t wpas_dbus_getter_global_capabilities(
const struct wpa_dbus_property_desc *property_desc,
DBusMessageIter *iter, DBusError *error, void *user_data)
{
- const char *capabilities[10] = { NULL, NULL, NULL, NULL, NULL, NULL,
- NULL, NULL, NULL, NULL };
+ const char *capabilities[11];
size_t num_items = 0;
#ifdef CONFIG_FILS
struct wpa_global *global = user_data;
@@ -1028,6 +1027,9 @@ dbus_bool_t wpas_dbus_getter_global_capabilities(
#ifdef CONFIG_SHA384
capabilities[num_items++] = "sha384";
#endif /* CONFIG_SHA384 */
+#ifdef CONFIG_OWE
+ capabilities[num_items++] = "owe";
+#endif /* CONFIG_OWE */
return wpas_dbus_simple_array_property_getter(iter,
DBUS_TYPE_STRING,
@@ -4491,7 +4493,7 @@ static dbus_bool_t wpas_dbus_get_bss_security_prop(
DBusMessageIter iter_dict, variant_iter;
const char *group;
const char *pairwise[5]; /* max 5 pairwise ciphers is supported */
- const char *key_mgmt[15]; /* max 15 key managements may be supported */
+ const char *key_mgmt[16]; /* max 16 key managements may be supported */
int n;
if (!dbus_message_iter_open_container(iter, DBUS_TYPE_VARIANT,
@@ -4544,6 +4546,10 @@ static dbus_bool_t wpas_dbus_get_bss_security_prop(
if (ie_data->key_mgmt & WPA_KEY_MGMT_FT_SAE)
key_mgmt[n++] = "ft-sae";
#endif /* CONFIG_SAE */
+#ifdef CONFIG_OWE
+ if (ie_data->key_mgmt & WPA_KEY_MGMT_OWE)
+ key_mgmt[n++] = "owe";
+#endif /* CONFIG_OWE */
if (ie_data->key_mgmt & WPA_KEY_MGMT_NONE)
key_mgmt[n++] = "wpa-none";
--
2.26.2

58
0001-openssl-Disable-padding-after-initializing-the-ciphe.patch
View File

@ -1,58 +0,0 @@
From e2e9adc3d9b6bb9c433ebb6404ee439b42e91746 Mon Sep 17 00:00:00 2001
Message-Id: <e2e9adc3d9b6bb9c433ebb6404ee439b42e91746.1629375427.git.davide.caratti@gmail.com>
From: Davide Caratti <davide.caratti@gmail.com>
Date: Tue, 17 Aug 2021 10:58:53 +0200
Subject: [PATCH] openssl: Disable padding after initializing the cipher suite
according to OpenSSL documentation [1], EVP_CIPHER_CTX_set_padding()
should be called after EVP_EncryptInit_ex(), EVP_DecryptInit_ex(), or
EVP_CipherInit_ex(). Not doing this causes EVP_CIPHER_CTX_set_padding()
to return false on OpenSSL-3.0.0, resulting in the impossibility to
connect in many scenarios. Fix this changing the order of function calls
where needed.
[1] https://www.openssl.org/docs/man1.1.1/man3/EVP_CIPHER_CTX_set_padding.html
Reported-by: Vladimir Benes <vbenes@redhat.com>
Signed-off-by: Davide Caratti <davide.caratti@gmail.com>
---
src/crypto/crypto_openssl.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/src/crypto/crypto_openssl.c b/src/crypto/crypto_openssl.c
index 9411cb9cf..4b87702e4 100644
--- a/src/crypto/crypto_openssl.c
+++ b/src/crypto/crypto_openssl.c
@@ -248,8 +248,8 @@ int rc4_skip(const u8 *key, size_t keylen, size_t skip,
ctx = EVP_CIPHER_CTX_new();
if (!ctx ||
- !EVP_CIPHER_CTX_set_padding(ctx, 0) ||
!EVP_CipherInit_ex(ctx, EVP_rc4(), NULL, NULL, NULL, 1) ||
+ !EVP_CIPHER_CTX_set_padding(ctx, 0) ||
!EVP_CIPHER_CTX_set_key_length(ctx, keylen) ||
!EVP_CipherInit_ex(ctx, NULL, NULL, key, NULL, 1))
goto out;
@@ -709,8 +709,8 @@ struct crypto_cipher * crypto_cipher_init(enum crypto_cipher_alg alg,
}
if (!(ctx->enc = EVP_CIPHER_CTX_new()) ||
- !EVP_CIPHER_CTX_set_padding(ctx->enc, 0) ||
!EVP_EncryptInit_ex(ctx->enc, cipher, NULL, NULL, NULL) ||
+ !EVP_CIPHER_CTX_set_padding(ctx->enc, 0) ||
!EVP_CIPHER_CTX_set_key_length(ctx->enc, key_len) ||
!EVP_EncryptInit_ex(ctx->enc, NULL, NULL, key, iv)) {
if (ctx->enc)
@@ -720,8 +720,8 @@ struct crypto_cipher * crypto_cipher_init(enum crypto_cipher_alg alg,
}
if (!(ctx->dec = EVP_CIPHER_CTX_new()) ||
- !EVP_CIPHER_CTX_set_padding(ctx->dec, 0) ||
!EVP_DecryptInit_ex(ctx->dec, cipher, NULL, NULL, NULL) ||
+ !EVP_CIPHER_CTX_set_padding(ctx->dec, 0) ||
!EVP_CIPHER_CTX_set_key_length(ctx->dec, key_len) ||
!EVP_DecryptInit_ex(ctx->dec, NULL, NULL, key, iv)) {
EVP_CIPHER_CTX_free(ctx->enc);
--
2.31.1

68
0001-openssl-Remove-deprecated-functions-from-des_encrypt.patch
View File

@ -1,68 +0,0 @@
From d265dd2d965db3669d07caa69539beb8def0edb2 Mon Sep 17 00:00:00 2001
Message-Id: <d265dd2d965db3669d07caa69539beb8def0edb2.1629375437.git.davide.caratti@gmail.com>
From: Davide Caratti <davide.caratti@gmail.com>
Date: Tue, 17 Aug 2021 10:58:54 +0200
Subject: [PATCH] openssl: Remove deprecated functions from des_encrypt()
NetworkManager-CI detected systematic failures on test scenarios using
MSCHAPv2 when wpa_supplicant uses OpenSSL-3.0.0.
The 'test_module_tests.py' script also fails, and the following log is
shown:
1627404013.761569: generate_nt_response failed
1627404013.761582: ms_funcs: 1 error
It seems that either DES_set_key() or DES_ecb_encrypt() changed their
semantic, but it doesn't make sense to fix them since their use has been
deprecated. Converting des_encrypt() to avoid use of deprecated
functions proved to fix the problem, and removed a couple of build
warnings at the same time.
Reported-by: Vladimir Benes <vbenes@redhat.com>
Signed-off-by: Davide Caratti <davide.caratti@gmail.com>
---
src/crypto/crypto_openssl.c | 21 +++++++++++++++------
1 file changed, 15 insertions(+), 6 deletions(-)
diff --git a/src/crypto/crypto_openssl.c b/src/crypto/crypto_openssl.c
index a4b1083bb..9411cb9cf 100644
--- a/src/crypto/crypto_openssl.c
+++ b/src/crypto/crypto_openssl.c
@@ -206,8 +206,8 @@ int md4_vector(size_t num_elem, const u8 *addr[], const size_t *len, u8 *mac)
int des_encrypt(const u8 *clear, const u8 *key, u8 *cypher)
{
u8 pkey[8], next, tmp;
- int i;
- DES_key_schedule ks;
+ int i, plen, ret = -1;
+ EVP_CIPHER_CTX *ctx;
/* Add parity bits to the key */
next = 0;
@@ -218,10 +218,19 @@ int des_encrypt(const u8 *clear, const u8 *key, u8 *cypher)
}
pkey[i] = next | 1;
- DES_set_key((DES_cblock *) &pkey, &ks);
- DES_ecb_encrypt((DES_cblock *) clear, (DES_cblock *) cypher, &ks,
- DES_ENCRYPT);
- return 0;
+ ctx = EVP_CIPHER_CTX_new();
+ if (ctx &&
+ EVP_EncryptInit_ex(ctx, EVP_des_ecb(), NULL, pkey, NULL) == 1 &&
+ EVP_CIPHER_CTX_set_padding(ctx, 0) == 1 &&
+ EVP_EncryptUpdate(ctx, cypher, &plen, clear, 8) == 1 &&
+ EVP_EncryptFinal_ex(ctx, &cypher[plen], &plen) == 1)
+ ret = 0;
+ else
+ wpa_printf(MSG_ERROR, "OpenSSL: DES encrypt failed");
+
+ if (ctx)
+ EVP_CIPHER_CTX_free(ctx);
+ return ret;
}
--
2.31.1

30
0001-p2p-Limit-P2P_DEVICE-name-to-appropriate-ifname-size.patch
View File

@ -1,30 +0,0 @@
From d4348cbbdbdba5d045b5b389ba6ce97b74936f30 Mon Sep 17 00:00:00 2001
From: Benjamin Berg <bberg@redhat.com>
Date: Mon, 15 Jun 2020 16:17:43 +0200
Subject: [PATCH] p2p: Limit P2P_DEVICE name to appropriate ifname size
Otherwise the WPA_IF_P2P_DEVICE cannot be created. As this is not a
netdev device, it is acceptable if the name is not completely unique. As
such, simply insert a NUL byte at the appropriate place.
---
wpa_supplicant/p2p_supplicant.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/wpa_supplicant/p2p_supplicant.c b/wpa_supplicant/p2p_supplicant.c
index e94bffe52..17c25889c 100644
--- a/wpa_supplicant/p2p_supplicant.c
+++ b/wpa_supplicant/p2p_supplicant.c
@@ -3929,6 +3929,10 @@ int wpas_p2p_add_p2pdev_interface(struct wpa_supplicant *wpa_s,
wpa_s->ifname);
if (os_snprintf_error(sizeof(ifname), ret))
return -1;
+ /* Cut length at the maximum size. Note that we don't need to ensure
+ * collision free names here as the created interface is not a netdev.
+ */
+ ifname[IFNAMSIZ-1] = '\0';
force_name[0] = '\0';
wpa_s->pending_interface_type = WPA_IF_P2P_DEVICE;
ret = wpa_drv_if_add(wpa_s, WPA_IF_P2P_DEVICE, ifname, NULL, NULL,
--
2.26.2

2
sources
View File

@ -1 +1 @@
SHA512 (wpa_supplicant-2.9.tar.gz) = 37a33f22cab9d27084fbef29856eaea0f692ff339c5b38bd32402dccf293cb849afd4a870cd3b5ca78179f0102f4011ce2f3444a53dc41dc75a5863b0a2226c8
SHA512 (wpa_supplicant-2.10.tar.gz) = 021c2a48f45d39c1dc6557730be5debaee071bc0ff82a271638beee6e32314e353e49d39e2f0dc8dff6e094dcc7008cfe1c32d0c7a34a1a345a12a3f1c1e11a1

60
wpa_supplicant-config.patch
View File

@ -1,4 +1,4 @@
From 72ee1e934e98ea87e4de292958817e724114703e Mon Sep 17 00:00:00 2001
rom 72ee1e934e98ea87e4de292958817e724114703e Mon Sep 17 00:00:00 2001
From: Lubomir Rintel <lkundrak@v3.sk>
Date: Fri, 6 Sep 2019 09:46:00 +0200
Subject: [PATCH] defconfig: Fedora configuration
@ -9,15 +9,6 @@ Subject: [PATCH] defconfig: Fedora configuration
--- a/wpa_supplicant/defconfig
+++ b/wpa_supplicant/defconfig
@@ -77,7 +77,7 @@ CONFIG_DRIVER_WIRED=y
#CONFIG_DRIVER_MACSEC_QCA=y
# Driver interface for Linux MACsec drivers
-#CONFIG_DRIVER_MACSEC_LINUX=y
+CONFIG_DRIVER_MACSEC_LINUX=y
# Driver interface for the Broadcom RoboSwitch family
#CONFIG_DRIVER_ROBOSWITCH=y
@@ -146,7 +146,7 @@ CONFIG_EAP_PAX=y
CONFIG_EAP_LEAP=y
@ -27,16 +18,7 @@ Subject: [PATCH] defconfig: Fedora configuration
# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
# This requires CONFIG_EAP_AKA to be enabled, too.
@@ -183,7 +183,7 @@ CONFIG_EAP_IKEV2=y
#CONFIG_EAP_EKE=y
# MACsec
-#CONFIG_MACSEC=y
+CONFIG_MACSEC=y
# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
@@ -342,6 +342,7 @@ CONFIG_IEEE80211W=y
@@ -338,6 +338,7 @@ CONFIG_BACKEND=file
# Select which ciphers to use by default with OpenSSL if the user does not
# specify them.
#CONFIG_TLS_DEFAULT_CIPHERS="DEFAULT:!EXP:!LOW"
@ -44,25 +26,16 @@ Subject: [PATCH] defconfig: Fedora configuration
# If CONFIG_TLS=internal is used, additional library and include paths are
# needed for LibTomMath. Alternatively, an integrated, minimal version of
@@ -473,7 +474,7 @@ CONFIG_DEBUG_SYSLOG=y
@@ -469,7 +470,7 @@ CONFIG_DEBUG_SYSLOG=y
# Should we attempt to use the getrandom(2) call that provides more reliable
# yet secure randomness source than /dev/random on Linux 3.17 and newer.
# Requires glibc 2.25 to build, falls back to /dev/random if unavailable.
-#CONFIG_GETRANDOM=y
+CONFIG_GETRANDOM=y
# IEEE 802.11n (High Throughput) support (mainly for AP mode)
CONFIG_IEEE80211N=y
@@ -514,7 +515,7 @@ CONFIG_AP=y
CONFIG_P2P=y
# Enable TDLS support
-#CONFIG_TDLS=y
+CONFIG_TDLS=y
# Wi-Fi Display
# This can be used to enable Wi-Fi Display extensions for P2P using an external
@@ -593,7 +594,7 @@ CONFIG_IBSS_RSN=y
# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
CONFIG_IEEE80211AC=y
@@ -587,7 +588,7 @@ CONFIG_IBSS_RSN=y
#CONFIG_PMKSA_CACHE_EXTERNAL=y
# Mesh Networking (IEEE 802.11s)
@ -71,15 +44,28 @@ Subject: [PATCH] defconfig: Fedora configuration
# Background scanning modules
# These can be used to request wpa_supplicant to perform background scanning
@@ -607,9 +608,10 @@ CONFIG_BGSCAN_SIMPLE=y
@@ -601,7 +602,7 @@ CONFIG_BGSCAN_SIMPLE=y
# Opportunistic Wireless Encryption (OWE)
# Experimental implementation of draft-harkins-owe-07.txt
-#CONFIG_OWE=y
+CONFIG_OWE=y
# Device Provisioning Protocol (DPP)
# This requires CONFIG_IEEE80211W=y to be enabled, too. (see
# wpa_supplicant/README-DPP for details)
# Device Provisioning Protocol (DPP) (also known as Wi-Fi Easy Connect)
CONFIG_DPP=y
@@ -617,7 +618,7 @@ CONFIG_DPP2=y
# functionality needed to use WEP is available in the current wpa_supplicant
# release under this optional build parameter. This functionality is subject to
# be completely removed in a future release.
-#CONFIG_WEP=y
+CONFIG_WEP=y
# Remove all TKIP functionality
# TKIP is an old cryptographic data confidentiality algorithm that is not
@@ -633,3 +634,6 @@ CONFIG_DPP2=y
# design is still subject to change. As such, this should not yet be enabled in
# production use.
#CONFIG_PASN=y
+#
+CONFIG_SUITEB192=y
+

54
wpa_supplicant-flush-debug-output.patch
View File

@ -1,49 +1,35 @@
--- wpa_supplicant-0.6.3/src/utils/wpa_debug.c.flush-debug 2007-07-30 23:15:34.000000000 -0400
+++ wpa_supplicant-0.6.3/src/utils/wpa_debug.c 2007-07-30 23:17:06.000000000 -0400
@@ -157,6 +157,7 @@ void wpa_debug_print_timestamp(void)
if (out_file) {
--- a/src/utils/wpa_debug.c
+++ b/src/utils/wpa_debug.c
@@ -79,6 +79,7 @@ void wpa_debug_print_timestamp(void)
if (out_file)
fprintf(out_file, "%ld.%06u: ", (long) tv.sec,
(unsigned int) tv.usec);
+ fflush(out_file);
} else
+ fflush(out_file);
#endif /* CONFIG_DEBUG_FILE */
printf("%ld.%06u: ", (long) tv.sec, (unsigned int) tv.usec);
@@ -185,6 +186,7 @@ void wpa_printf(int level, char *fmt, ..
if (out_file) {
if (!out_file && !wpa_debug_syslog)
printf("%ld.%06u: ", (long) tv.sec, (unsigned int) tv.usec);
@@ -230,6 +231,7 @@ void wpa_printf(int level, const char *f
va_start(ap, fmt);
vfprintf(out_file, fmt, ap);
fprintf(out_file, "\n");
+ fflush(out_file);
} else {
va_end(ap);
}
#endif /* CONFIG_DEBUG_FILE */
vprintf(fmt, ap);
@@ -217,6 +219,7 @@ static void _wpa_hexdump(int level, cons
@@ -365,6 +367,7 @@ static void _wpa_hexdump(int level, cons
fprintf(out_file, " [REMOVED]");
}
fprintf(out_file, "\n");
+ fflush(out_file);
} else {
}
#endif /* CONFIG_DEBUG_FILE */
printf("%s - hexdump(len=%lu):", title, (unsigned long) len);
@@ -262,12 +265,14 @@ static void _wpa_hexdump_ascii(int level
fprintf(out_file,
"%s - hexdump_ascii(len=%lu): [REMOVED]\n",
title, (unsigned long) len);
+ fflush(out_file);
return;
}
if (buf == NULL) {
fprintf(out_file,
"%s - hexdump_ascii(len=%lu): [NULL]\n",
title, (unsigned long) len);
+ fflush(out_file);
return;
}
fprintf(out_file, "%s - hexdump_ascii(len=%lu):\n",
@@ -292,6 +297,7 @@ static void _wpa_hexdump_ascii(int level
pos += llen;
len -= llen;
if (!wpa_debug_syslog && !out_file) {
@@ -468,6 +471,8 @@ static void _wpa_hexdump_ascii(int level
}
}
file_done:
+ if (out_file)
+ fflush(out_file);
} else {
#endif /* CONFIG_DEBUG_FILE */
if (!show) {
if (!wpa_debug_syslog && !out_file) {
if (!show) {

11
wpa_supplicant-gui-qt4.patch
View File

@ -9,12 +9,10 @@ different locations.
wpa_supplicant/Makefile | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/wpa_supplicant/Makefile b/wpa_supplicant/Makefile
index ad9ead9..b19676d 100644
--- a/wpa_supplicant/Makefile
+++ b/wpa_supplicant/Makefile
@@ -11,6 +11,9 @@ export INCDIR ?= /usr/local/include/
export BINDIR ?= /usr/local/sbin/
@@ -35,6 +35,9 @@ export INCDIR ?= /usr/local/include
export BINDIR ?= /usr/local/sbin
PKG_CONFIG ?= pkg-config
+QMAKE ?= qmake
@ -23,7 +21,7 @@ index ad9ead9..b19676d 100644
CFLAGS += $(EXTRA_CFLAGS)
CFLAGS += -I$(abspath ../src)
CFLAGS += -I$(abspath ../src/utils)
@@ -1787,10 +1790,10 @@ wpa_gui:
@@ -2039,10 +2042,10 @@ wpa_gui:
@echo "wpa_gui has been removed - see wpa_gui-qt4 for replacement"
wpa_gui-qt4/Makefile:
@ -36,6 +34,3 @@ index ad9ead9..b19676d 100644
wpa_gui-qt4: wpa_gui-qt4/Makefile wpa_gui-qt4/lang/wpa_gui_de.qm
$(MAKE) -C wpa_gui-qt4
--
2.6.2

37
wpa_supplicant.spec
View File

@ -8,8 +8,8 @@
Summary: WPA/WPA2/IEEE 802.1X Supplicant
Name: wpa_supplicant
Epoch: 1
Version: 2.9
Release: 16%{?dist}
Version: 2.10
Release: 1%{?dist}
License: BSD
Source0: http://w1.fi/releases/%{name}-%{version}.tar.gz
Source1: wpa_supplicant.conf
@ -29,34 +29,6 @@ Patch2: wpa_supplicant-flush-debug-output.patch
Patch3: wpa_supplicant-quiet-scan-results-message.patch
# distro specific customization for Qt4 build tools, not suitable for upstream
Patch4: wpa_supplicant-gui-qt4.patch
# fix AP mode PMF disconnection protection bypass
Patch5: 0001-AP-Silently-ignore-management-frame-from-unexpected-.patch
# fix some issues with P2P operation
Patch6: 0001-P2P-Always-use-global-p2p_long_listen.patch
Patch7: 0001-D-Bus-Fix-P2P-NULL-dereference-after-interface-remov.patch
Patch8: 0001-p2p-Limit-P2P_DEVICE-name-to-appropriate-ifname-size.patch
#fix for bz1915236
Patch9: 0001-D-Bus-Allow-changing-an-interface-bridge-via-D-Bus.patch
#expose OWE capability in D-Bus
Patch10: 0001-dbus-Export-OWE-capability-and-OWE-BSS-key_mgmt.patch
#fix for CVE-2021-0326
Patch11: 0001-P2P-Fix-copying-of-secondary-device-types-for-P2P-gr.patch
#fix for CVE-2021-27803
Patch12: 0001-P2P-Fix-a-corner-case-in-peer-addition-based-on-PD-R.patch
# fix for 802.11r networks, and cards that don't support it
Patch13: 0001-Check-for-FT-support-when-selecting-FT-suites.patch
#fix nmci failures with OpenSSL-3.0.0
Patch14: 0001-OpenSSL-Allow-systemwide-secpolicy-overrides-for-TLS.patch
Patch15: 0001-EAP-TTLS-PEAP-peer-Fix-failure-when-using-session-ti.patch
Patch16: 0001-openssl-Disable-padding-after-initializing-the-ciphe.patch
Patch17: 0001-openssl-Remove-deprecated-functions-from-des_encrypt.patch
URL: http://w1.fi/wpa_supplicant/
@ -100,7 +72,7 @@ Graphical User Interface for wpa_supplicant written using QT
%prep
%autosetup -p1
%autosetup -p1 -n %{name}-%{version}
%build
@ -217,6 +189,9 @@ chmod -R 0644 wpa_supplicant/examples/*.py
%changelog
* Mon Jan 17 2022 Davide Caratti <dcaratti@redhat.com> - 1:2.10-1
- Update to version 2.10 (keeping CONFIG_WEP enabled). Related: rhbz#2041269
* Tue Sep 14 2021 Sahana Prasad <sahana@redhat.com> - 1:2.9-16
- Rebuilt with OpenSSL 3.0.0