vsftpd/vsftpd-2.1.0-configuration.patch

diff -up vsftpd-2.2.0/defs.h.configuration vsftpd-2.2.0/defs.h
--- vsftpd-2.2.0/defs.h.configuration	2009-01-07 21:22:22.000000000 +0100
+++ vsftpd-2.2.0/defs.h	2009-08-04 07:37:01.000000000 +0200
@@ -1,7 +1,7 @@
 #ifndef VSF_DEFS_H
 #define VSF_DEFS_H
 
-#define VSFTP_DEFAULT_CONFIG    "/etc/vsftpd.conf"
+#define VSFTP_DEFAULT_CONFIG    "/etc/vsftpd/vsftpd.conf"
 
 #define VSFTP_COMMAND_FD        0
 
diff -up vsftpd-2.2.0/EXAMPLE/INTERNET_SITE_NOINETD/README.configuration vsftpd-2.2.0/EXAMPLE/INTERNET_SITE_NOINETD/README
--- vsftpd-2.2.0/EXAMPLE/INTERNET_SITE_NOINETD/README.configuration	2008-02-02 02:30:40.000000000 +0100
+++ vsftpd-2.2.0/EXAMPLE/INTERNET_SITE_NOINETD/README	2009-08-04 07:37:01.000000000 +0200
@@ -17,7 +17,7 @@ even per-connect-IP configurability.
 
 To use this example config:
 
-1) Copy the vsftpd.conf file in this directory to /etc/vsftpd.conf.
+1) Copy the vsftpd.conf file in this directory to /etc/vsftpd/vsftpd.conf.
 
 2) Start up vsftpd, e.g.
 vsftpd &
@@ -51,5 +51,5 @@ in the vsftpd.conf:
 listen_address=192.168.1.2
 
 And launch vsftpd with a specific config file like this:
-vsftpd /etc/vsftpd.conf.site1 &
+vsftpd /etc/vsftpd/vsftpd.conf.site1 &
 
diff -up vsftpd-2.2.0/EXAMPLE/INTERNET_SITE/README.configuration vsftpd-2.2.0/EXAMPLE/INTERNET_SITE/README
--- vsftpd-2.2.0/EXAMPLE/INTERNET_SITE/README.configuration	2008-02-02 02:30:40.000000000 +0100
+++ vsftpd-2.2.0/EXAMPLE/INTERNET_SITE/README	2009-08-04 07:37:01.000000000 +0200
@@ -41,13 +41,13 @@ no_access               = 192.168.1.3
 As an example of how to ban certain sites from connecting, 192.168.1.3 will
 be denied access.
 
-banner_fail             = /etc/vsftpd.busy_banner
+banner_fail             = /etc/vsftpd/busy_banner
 
 This is the file to display to users if the connection is refused for whatever
 reason (too many users, IP banned).
 
 Example of how to populate it:
-echo "421 Server busy, please try later." > /etc/vsftpd.busy_banner
+echo "421 Server busy, please try later." > /etc/vsftpd/busy_banner
 
 log_on_success          += PID HOST DURATION
 log_on_failure          += HOST
@@ -62,7 +62,7 @@ Step 2) Set up your vsftpd configuration
 
 An example file is supplied. Install it like this:
 
-cp vsftpd.conf /etc
+cp vsftpd.conf /etc/vsftpd
 
 Let's example the contents of the file:
 
diff -up vsftpd-2.2.0/EXAMPLE/PER_IP_CONFIG/README.configuration vsftpd-2.2.0/EXAMPLE/PER_IP_CONFIG/README
--- vsftpd-2.2.0/EXAMPLE/PER_IP_CONFIG/README.configuration	2008-02-02 02:30:40.000000000 +0100
+++ vsftpd-2.2.0/EXAMPLE/PER_IP_CONFIG/README	2009-08-04 07:37:01.000000000 +0200
@@ -20,12 +20,12 @@ directory: hosts.allow. It lives at /etc
 
 Let's have a look at the example:
 
-vsftpd: 192.168.1.3: setenv VSFTPD_LOAD_CONF /etc/vsftpd_tcp_wrap.conf
+vsftpd: 192.168.1.3: setenv VSFTPD_LOAD_CONF /etc/vsftpd/tcp_wrap.conf
 vsftpd: 192.168.1.4: DENY
 
 The first line:
 If a client connects from 192.168.1.3, then vsftpd will apply the vsftpd
-config file /etc/vsftpd_tcp_wrap.conf to the session! These settings are
+config file /etc/vsftpd/tcp_wrap.conf to the session! These settings are
 applied ON TOP of the default vsftpd.conf.
 This is obviously very powerful. You might use this to apply different
 access restrictions for some IPs (e.g. the ability to upload).
diff -up vsftpd-2.2.0/EXAMPLE/VIRTUAL_USERS/README.configuration vsftpd-2.2.0/EXAMPLE/VIRTUAL_USERS/README
--- vsftpd-2.2.0/EXAMPLE/VIRTUAL_USERS/README.configuration	2008-02-02 02:30:40.000000000 +0100
+++ vsftpd-2.2.0/EXAMPLE/VIRTUAL_USERS/README	2009-08-04 07:37:01.000000000 +0200
@@ -15,7 +15,7 @@ See example file "logins.txt" - this spe
 "fred" with password "bar".
 Whilst logged in as root, create the actual database file like this:
 
-db_load -T -t hash -f logins.txt /etc/vsftpd_login.db
+db_load -T -t hash -f logins.txt /etc/vsftpd/login.db
 (Requires the Berkeley db program installed).
 NOTE: Many systems have multiple versions of "db" installed, so you may
 need to use e.g. db3_load for correct operation. This is known to affect
@@ -23,10 +23,10 @@ some Debian systems. The core issue is t
 database to be a specific db version (often db3, whereas db4 may be installed
 on your system).
 
-This will create /etc/vsftpd_login.db. Obviously, you may want to make sure
+This will create /etc/vsftpd/login.db. Obviously, you may want to make sure
 the permissions are restricted:
 
-chmod 600 /etc/vsftpd_login.db
+chmod 600 /etc/vsftpd/login.db
 
 For more information on maintaing your login database, look around for
 documentation on "Berkeley DB", e.g.
@@ -37,8 +37,8 @@ Step 2) Create a PAM file which uses you
 
 See the example file vsftpd.pam. It contains two lines:
 
-auth required /lib/security/pam_userdb.so db=/etc/vsftpd_login
-account required /lib/security/pam_userdb.so db=/etc/vsftpd_login
+auth required /lib/security/pam_userdb.so db=/etc/vsftpd/login
+account required /lib/security/pam_userdb.so db=/etc/vsftpd/login
 
 This tells PAM to authenticate users using our new database. Copy this PAM
 file to the PAM directory - typically /etc/pam.d/
@@ -108,9 +108,9 @@ pasv_max_port=30999
 These put a port range on passive FTP incoming requests - very useful if
 you are configuring a firewall.
 
-Copy the example vsftpd.conf file to /etc:
+Copy the example vsftpd.conf file to /etc/vsftpd:
 
-cp vsftpd.conf /etc/
+cp vsftpd.conf /etc/vsftpd/
 
 
 Step 5) Start up vsftpd.
diff -up vsftpd-2.2.0/FAQ.configuration vsftpd-2.2.0/FAQ
--- vsftpd-2.2.0/FAQ.configuration	2009-02-18 23:33:04.000000000 +0100
+++ vsftpd-2.2.0/FAQ	2009-08-04 07:37:01.000000000 +0200
@@ -34,7 +34,7 @@ needs this user to run bits of itself wi
 Q) Help! Local users cannot log in.
 A) There are various possible problems.
 A1) By default, vsftpd disables any logins other than anonymous logins. Put
-local_enable=YES in your /etc/vsftpd.conf to allow local users to log in.
+local_enable=YES in your /etc/vsftpd/vsftpd.conf to allow local users to log in.
 A2) vsftpd tries to link with PAM. (Run "ldd vsftpd" and look for libpam to
 find out whether this has happened or not). If vsftpd links with PAM, then
 you will need to have a PAM file installed for the vsftpd service. There is
@@ -46,12 +46,12 @@ system have a "shadow.h" file in the inc
 A4) If you are not using PAM, then vsftpd will do its own check for a valid
 user shell in /etc/shells. You may need to disable this if you use an invalid
 shell to disable logins other than FTP logins. Put check_shell=NO in your
-/etc/vsftpd.conf.
+/etc/vsftpd/vsftpd.conf.
 
 Q) Help! Uploads or other write commands give me "500 Unknown command.".
 A) By default, write commands, including uploads and new directories, are
 disabled. This is a security measure. To enable writes, put write_enable=YES
-in your /etc/vsftpd.conf.
+in your /etc/vsftpd/vsftpd.conf.
 
 Q) Help! What are the security implications referred to in the
 "chroot_local_user" option?
@@ -87,7 +87,7 @@ A2) Alternatively, run as many copies as
 mode. Use "listen_address=x.x.x.x" to set the virtual IP.
 
 Q) Help! Does vsftpd support virtual users?
-A) Yes, via PAM integration. Set "guest_enable=YES" in /etc/vsftpd.conf. This
+A) Yes, via PAM integration. Set "guest_enable=YES" in /etc/vsftpd/vsftpd.conf. This
 has the effect of mapping every non-anonymous successful login to the local
 username specified in "guest_username". Then, use PAM and (e.g.) its pam_userdb
 module to provide authentication against an external (i.e. non-/etc/passwd)
diff -up vsftpd-2.2.0/INSTALL.configuration vsftpd-2.2.0/INSTALL
--- vsftpd-2.2.0/INSTALL.configuration	2008-02-02 02:30:39.000000000 +0100
+++ vsftpd-2.2.0/INSTALL	2009-08-04 07:37:01.000000000 +0200
@@ -56,14 +56,14 @@ cp vsftpd.8 /usr/local/man/man8
 
 "make install" doesn't copy the sample config file. It is recommended you
 do this:
-cp vsftpd.conf /etc
+cp vsftpd.conf /etc/vsftpd
 
 Step 4) Smoke test (without an inetd).
 
 vsftpd can run standalone or via an inetd (such as inetd or xinetd). You will
 typically get more control running vsftpd from an inetd. But first we will run
 it without, so we can check things are going well so far.
-Edit /etc/vsftpd.conf, and add this line at the bottom:
+Edit /etc/vsftpd/vsftpd.conf, and add this line at the bottom:
 
 listen=YES
 
@@ -135,11 +135,11 @@ cp RedHat/vsftpd.pam /etc/pam.d/ftp
 Step 7) Customize your configuration
 
 As well as the above three pre-requisites, you are recommended to install a
-config file. The default location for the config file is /etc/vsftpd.conf.
+config file. The default location for the config file is /etc/vsftpd/vsftpd.conf.
 There is a sample vsftpd.conf in the distribution tarball. You probably want
-to copy that to /etc/vsftpd.conf as a basis for modification, i.e.:
+to copy that to /etc/vsftpd/vsftpd.conf as a basis for modification, i.e.:
 
-cp vsftpd.conf /etc
+cp vsftpd.conf /etc/vsftpd
 
 The default configuration allows neither local user logins nor anonymous
 uploads. You may wish to change these defaults.
diff -up vsftpd-2.2.0/README.configuration vsftpd-2.2.0/README
--- vsftpd-2.2.0/README.configuration	2009-07-07 22:23:22.000000000 +0200
+++ vsftpd-2.2.0/README	2009-08-04 07:37:01.000000000 +0200
@@ -37,3 +37,8 @@ All configuration options are documented
 Various example configurations are discussed in the EXAMPLE directory.
 Frequently asked questions are tackled in the FAQ file.
 
+Important Note
+==============
+The location of configuration files was changed to /etc/vsftpd/. If you want
+to migrate your old conf files from /etc (files vsftpd.xxxx.rpmsave) use
+/etc/vsfptd/vsftpd_conf_migrate.sh
diff -up vsftpd-2.2.0/tunables.c.configuration vsftpd-2.2.0/tunables.c
--- vsftpd-2.2.0/tunables.c.configuration	2009-07-15 22:08:27.000000000 +0200
+++ vsftpd-2.2.0/tunables.c	2009-08-04 07:37:01.000000000 +0200
@@ -186,7 +186,7 @@ tunables_load_defaults()
   tunable_listen_ipv6 = 0;
   tunable_dual_log_enable = 0;
   tunable_syslog_enable = 0;
-  tunable_background = 0;
+  tunable_background = 1;
   tunable_virtual_use_local_privs = 0;
   tunable_session_support = 0;
   tunable_download_enable = 1;
@@ -254,11 +254,11 @@ tunables_load_defaults()
   install_str_setting(".message", &tunable_message_file);
   install_str_setting("nobody", &tunable_nopriv_user);
   install_str_setting(0, &tunable_ftpd_banner);
-  install_str_setting("/etc/vsftpd.banned_emails", &tunable_banned_email_file);
-  install_str_setting("/etc/vsftpd.chroot_list", &tunable_chroot_list_file);
+  install_str_setting("/etc/vsftpd/banned_emails", &tunable_banned_email_file);
+  install_str_setting("/etc/vsftpd/chroot_list", &tunable_chroot_list_file);
   install_str_setting("ftp", &tunable_pam_service_name);
   install_str_setting("ftp", &tunable_guest_username);
-  install_str_setting("/etc/vsftpd.user_list", &tunable_userlist_file);
+  install_str_setting("/etc/vsftpd/user_list", &tunable_userlist_file);
   install_str_setting(0, &tunable_anon_root);
   install_str_setting(0, &tunable_local_root);
   install_str_setting(0, &tunable_banner_file);
@@ -271,7 +271,7 @@ tunables_load_defaults()
   install_str_setting(0, &tunable_hide_file);
   install_str_setting(0, &tunable_deny_file);
   install_str_setting(0, &tunable_user_sub_token);
-  install_str_setting("/etc/vsftpd.email_passwords",
+  install_str_setting("/etc/vsftpd/email_passwords",
                       &tunable_email_password_file);
   install_str_setting("/usr/share/ssl/certs/vsftpd.pem",
                       &tunable_rsa_cert_file);
diff -up vsftpd-2.2.0/vsftpd.8.configuration vsftpd-2.2.0/vsftpd.8
--- vsftpd-2.2.0/vsftpd.8.configuration	2009-07-17 22:56:23.000000000 +0200
+++ vsftpd-2.2.0/vsftpd.8	2009-08-04 07:40:27.000000000 +0200
@@ -21,7 +21,7 @@ itself will listen on the network. This 
 recommended. It is activated by setting
 .Pa listen=YES
 in
-.Pa /etc/vsftpd.conf .
+.Pa /etc/vsftpd/vsftpd.conf .
 Direct execution of the
 .Nm vsftpd
 binary will then launch the FTP service ready for immediate client connections.
@@ -33,7 +33,7 @@ as root. Any command line option not sta
 as a config file that will be loaded. Note that config files are loaded in the
 strict order that they are encountered on the command line.
 If no config files are specified, the default configuration file of
-.Pa /etc/vsftpd.conf
+.Pa /etc/vsftpd/vsftpd.conf
 will be loaded, after all other command line options are processed.
 .Pp
 Supported options are:
@@ -47,14 +47,14 @@ their appearance on the command line, in
 config files.
 .El
 .Sh EXAMPLES
-vsftpd -olisten=NO /etc/vsftpd.conf -oftpd_banner=blah
+vsftpd -olisten=NO /etc/vsftpd/vsftpd.conf -oftpd_banner=blah
 .Pp
 That example overrides vsftpd's built-in default for the "listen" option to be
-NO, but then loads /etc/vsftpd.conf which may override that setting. Finally,
+NO, but then loads /etc/vsftpd/vsftpd.conf which may override that setting. Finally,
 the "ftpd_banner" setting is set to "blah", which overrides any default vsftpd
 setting and any identical setting that was in the config file.
 .Sh FILES
-.Pa /etc/vsftpd.conf
+.Pa /etc/vsftpd/vsftpd.conf
 .Sh SEE ALSO
 .Xr vsftpd.conf 5
 .end
diff -up vsftpd-2.2.0/vsftpd.conf.5.configuration vsftpd-2.2.0/vsftpd.conf.5
--- vsftpd-2.2.0/vsftpd.conf.5.configuration	2009-07-17 22:57:04.000000000 +0200
+++ vsftpd-2.2.0/vsftpd.conf.5	2009-08-04 07:37:01.000000000 +0200
@@ -4,7 +4,7 @@ vsftpd.conf \- config file for vsftpd
 .SH DESCRIPTION
 vsftpd.conf may be used to control various aspects of vsftpd's behaviour. By
 default, vsftpd looks for this file at the location
-.BR /etc/vsftpd.conf .
+.BR /etc/vsftpd/vsftpd.conf .
 However, you may override this by specifying a command line argument to
 vsftpd. The command line argument is the pathname of the configuration file
 for vsftpd. This behaviour is useful because you may wish to use an advanced
@@ -110,7 +110,7 @@ When enabled, and vsftpd is started in "
 the listener process. i.e. control will immediately be returned to the shell
 which launched vsftpd.
 
-Default: NO
+Default: YES
 .TP
 .B check_shell
 Note! This option only has an effect for non-PAM builds of vsftpd. If disabled,
@@ -138,7 +138,7 @@ chroot() jail in their home directory up
 different if chroot_local_user is set to YES. In this case, the list becomes
 a list of users which are NOT to be placed in a chroot() jail.
 By default, the file containing this list is
-/etc/vsftpd.chroot_list, but you may override this with the
+/etc/vsftpd/chroot_list, but you may override this with the
 .BR chroot_list_file
 setting.
 
@@ -177,7 +177,7 @@ Default: NO
 .B deny_email_enable
 If activated, you may provide a list of anonymous password e-mail responses
 which cause login to be denied. By default, the file containing this list is
-/etc/vsftpd.banned_emails, but you may override this with the
+/etc/vsftpd/banned_emails, but you may override this with the
 .BR banned_email_file
 setting.
 
@@ -433,7 +433,7 @@ anonymous logins are prevented unless th
 file specified by the
 .BR email_password_file
 setting. The file format is one password per line, no extra whitespace. The
-default filename is /etc/vsftpd.email_passwords.
+default filename is /etc/vsftpd/email_passwords.
 
 Default: NO
 .TP
@@ -764,7 +764,7 @@ passwords which are not permitted. This 
 .BR deny_email_enable
 is enabled.
 
-Default: /etc/vsftpd.banned_emails
+Default: /etc/vsftpd/banned_emails
 .TP
 .B banner_file
 This option is the name of a file containing text to display when someone
@@ -801,7 +801,7 @@ is enabled. If the option
 is enabled, then the list file becomes a list of users to NOT place in a
 chroot() jail.
 
-Default: /etc/vsftpd.chroot_list
+Default: /etvsftpd.confc/vsftpd.chroot_list
 .TP
 .B cmds_allowed
 This options specifies a comma separated list of allowed FTP commands (post
@@ -862,7 +862,7 @@ This option can be used to provide an al
 .BR secure_email_list_enable
 setting.
 
-Default: /etc/vsftpd.email_passwords
+Default: /etc/vsftpd/email_passwords
 .TP
 .B ftp_username
 This is the name of the user we use for handling anonymous FTP. The home
@@ -985,10 +985,10 @@ the manual page, on a per-user basis. Us
 with an example. If you set
 .BR user_config_dir
 to be
-.BR /etc/vsftpd_user_conf
+.BR /etc/vsftpd/user_conf
 and then log on as the user "chris", then vsftpd will apply the settings in
 the file
-.BR /etc/vsftpd_user_conf/chris
+.BR /etc/vsftpd/user_conf/chris
 for the duration of the session. The format of this file is as detailed in
 this manual page! PLEASE NOTE that not all settings are effective on a
 per-user basis. For example, many settings only prior to the user's session
@@ -1024,7 +1024,7 @@ This option is the name of the file load
 .BR userlist_enable
 option is active.
 
-Default: /etc/vsftpd.user_list
+Default: /etc/vsftpd/user_list
 .TP
 .B vsftpd_log_file
 This option is the name of the file to which we write the vsftpd style
diff -up vsftpd-2.2.0/vsftpd.conf.configuration vsftpd-2.2.0/vsftpd.conf
--- vsftpd-2.2.0/vsftpd.conf.configuration	2009-06-17 22:05:28.000000000 +0200
+++ vsftpd-2.2.0/vsftpd.conf	2009-08-04 07:53:13.000000000 +0200
@@ -1,4 +1,4 @@
-# Example config file /etc/vsftpd.conf
+# Example config file /etc/vsftpd/vsftpd.conf
 #
 # The default compiled in settings are fairly paranoid. This sample file
 # loosens things up a bit, to make the ftp daemon more usable.
@@ -12,14 +12,14 @@
 anonymous_enable=YES
 #
 # Uncomment this to allow local users to log in.
-#local_enable=YES
+local_enable=YES
 #
 # Uncomment this to enable any form of FTP write command.
-#write_enable=YES
+write_enable=YES
 #
 # Default umask for local users is 077. You may wish to change this to 022,
 # if your users expect that (022 is used by most other ftpd's)
-#local_umask=022
+local_umask=022
 #
 # Uncomment this to allow the anonymous FTP user to upload files. This only
 # has an effect if the above global write enable is activated. Also, you will
@@ -52,7 +52,7 @@ connect_from_port_20=YES
 #
 # If you want, you can have your log file in standard ftpd xferlog format.
 # Note that the default log file location is /var/log/xferlog in this case.
-#xferlog_std_format=YES
+xferlog_std_format=YES
 #
 # You may change the default value for timing out an idle session.
 #idle_session_timeout=600
@@ -87,7 +87,7 @@ connect_from_port_20=YES
 # useful for combatting certain DoS attacks.
 #deny_email_enable=YES
 # (default follows)
-#banned_email_file=/etc/vsftpd.banned_emails
+#banned_email_file=/etc/vsftpd/banned_emails
 #
 # You may specify an explicit list of local users to chroot() to their home
 # directory. If chroot_local_user is YES, then this list becomes a list of
@@ -95,7 +95,7 @@ connect_from_port_20=YES
 #chroot_local_user=YES
 #chroot_list_enable=YES
 # (default follows)
-#chroot_list_file=/etc/vsftpd.chroot_list
+#chroot_list_file=/etc/vsftpd/chroot_list
 #
 # You may activate the "-R" option to the builtin ls. This is disabled by
 # default to avoid remote users being able to cause excessive I/O on large
@@ -112,3 +112,7 @@ listen=YES
 # sockets, you must run two copies of vsftpd with two configuration files.
 # Make sure, that one of the listen options is commented !!
 #listen_ipv6=YES
+
+pam_service_name=vsftpd
+userlist_enable=YES
+tcp_wrappers=YES