virt-v2v/SOURCES/0015-RHEL-Disable-o-glance.patch

From b0386851d539e414302cb646567836717fd027d9 Mon Sep 17 00:00:00 2001
From: "Richard W.M. Jones" <rjones@redhat.com>
Date: Wed, 30 Jun 2021 11:15:52 +0100
Subject: [PATCH] RHEL: Disable -o glance

Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1977539
---
 docs/virt-v2v-output-openstack.pod | 54 ++----------------------------
 docs/virt-v2v.pod                  | 20 -----------
 output/output_glance.mli           |  2 +-
 tests/test-v2v-o-glance.sh         |  3 ++
 v2v/v2v.ml                         |  7 +---
 5 files changed, 7 insertions(+), 79 deletions(-)

diff --git a/docs/virt-v2v-output-openstack.pod b/docs/virt-v2v-output-openstack.pod
index cd4862b1..54cd276e 100644
--- a/docs/virt-v2v-output-openstack.pod
+++ b/docs/virt-v2v-output-openstack.pod
@@ -10,13 +10,10 @@ virt-v2v-output-openstack - Using virt-v2v to convert guests to OpenStack
                         [-oo verify-server-certificate=false]
                         [-oo os-username=admin] [-oo os-*=*]
 
- virt-v2v [-i* options] -o glance
-
 =head1 DESCRIPTION
 
 This page documents how to use L<virt-v2v(1)> to convert guests to run
-on OpenStack.  There are two output modes you can select, but only
-I<-o openstack> should be used normally.
+on OpenStack.
 
 =over 4
 
@@ -27,15 +24,6 @@ Full description: L</OUTPUT TO OPENSTACK>
 This is the modern method for uploading to OpenStack via the REST API.
 Guests can be directly converted into Cinder volumes.
 
-=item B<-o glance>
-
-Full description: L</OUTPUT TO GLANCE>
-
-This is the old method for uploading to Glance.  Unfortunately Glance
-is not well suited to storing converted guests (since virt-v2v deals
-with "pets" not templated "cattle"), so this method is not recommended
-unless you really know what you are doing.
-
 =back
 
 =head1 OUTPUT TO OPENSTACK
@@ -176,48 +164,10 @@ no Cinder volume type is used.
 The following options are B<not> supported with OpenStack: I<-oa>,
 I<-of>.
 
-=head1 OUTPUT TO GLANCE
-
-Note this is a legacy option.  In most cases you should use
-L</OUTPUT TO OPENSTACK> instead.
-
-To output to OpenStack Glance, use the I<-o glance> option.
-
-This runs the L<glance(1)> CLI program which must be installed on the
-virt-v2v conversion host.  For authentication to work, you will need
-to set C<OS_*> environment variables.  See
-L</OpenStack: Authentication> above.
-
-Virt-v2v adds metadata for the guest to Glance, describing such things
-as the guest operating system and what drivers it requires.  The
-command C<glance image-show> will display the metadata as "Property"
-fields such as C<os_type> and C<hw_disk_bus>.
-
-=head2 Glance and sparseness
-
-Glance image upload doesn't appear to correctly handle sparseness.
-For this reason, using qcow2 will be faster and use less space on the
-Glance server.  Use the virt-v2v S<I<-of qcow2>> option.
-
-=head2 Glance and multiple disks
-
-If the guest has a single disk, then the name of the disk in Glance
-will be the name of the guest.  You can control this using the I<-on>
-option.
-
-Glance doesn't have a concept of associating multiple disks with a
-single guest, and Nova doesn't allow you to boot a guest from multiple
-Glance disks either.  If the guest has multiple disks, then the first
-(assumed to be the system disk) will have the name of the guest, and
-the second and subsequent data disks will be called
-C<I<guestname>-disk2>, C<I<guestname>-disk3> etc.  It may be best to
-leave the system disk in Glance, and import the data disks to Cinder.
-
 =head1 SEE ALSO
 
 L<virt-v2v(1)>,
-L<https://docs.openstack.org/python-openstackclient/latest/cli/man/openstack.html>,
-L<glance(1)>.
+L<https://docs.openstack.org/python-openstackclient/latest/cli/man/openstack.html>.
 
 =head1 AUTHOR
 
diff --git a/docs/virt-v2v.pod b/docs/virt-v2v.pod
index 81a4b45a..7c7069df 100644
--- a/docs/virt-v2v.pod
+++ b/docs/virt-v2v.pod
@@ -435,14 +435,6 @@ See L</Networks and bridges> below.
 
 This is the same as I<-o local>.
 
-=item B<-o> B<glance>
-
-This is a legacy option.  You should probably use I<-o openstack>
-instead.
-
-Set the output method to OpenStack Glance.  In this mode the converted
-guest is uploaded to Glance.  See L<virt-v2v-output-openstack(1)>.
-
 =item B<-o> B<kubevirt>
 
 Set the output method to I<kubevirt>.  B<Note the way this mode works
@@ -1191,11 +1183,6 @@ and output methods may use disk space, as outlined in the table below.
 This temporarily places a full copy of the uncompressed source disks
 in C<$VIRT_V2V_TMPDIR> (or F</var/tmp>).
 
-=item I<-o glance>
-
-This temporarily places a full copy of the output disks in
-C<$VIRT_V2V_TMPDIR> (or F</var/tmp>).
-
 =item I<-o local>
 
 =item I<-o qemu>
@@ -1398,13 +1385,6 @@ See also L</Starting the libvirt system instance>.
 Because of how Cinder volumes are presented as F</dev> block devices,
 using I<-o openstack> normally requires that virt-v2v is run as root.
 
-=item Writing to Glance
-
-This does I<not> need root (in fact it probably won’t work), but may
-require either a special user and/or for you to source a script that
-sets authentication environment variables.  Consult the Glance
-documentation.
-
 =item Writing to block devices
 
 This normally requires root.  See the next section.
diff --git a/output/output_glance.mli b/output/output_glance.mli
index 972320a2..9befc461 100644
--- a/output/output_glance.mli
+++ b/output/output_glance.mli
@@ -18,4 +18,4 @@
 
 (** [-o glance] output mode. *)
 
-module Glance : Output.OUTPUT
+(*module Glance : Output.OUTPUT*)
diff --git a/tests/test-v2v-o-glance.sh b/tests/test-v2v-o-glance.sh
index c0db9115..074b5e16 100755
--- a/tests/test-v2v-o-glance.sh
+++ b/tests/test-v2v-o-glance.sh
@@ -20,6 +20,9 @@
 
 set -e
 
+# Feature is disabled in RHEL 9.
+exit 77
+
 source ./functions.sh
 set -e
 set -x
diff --git a/v2v/v2v.ml b/v2v/v2v.ml
index fca5f6e9..4148fa50 100644
--- a/v2v/v2v.ml
+++ b/v2v/v2v.ml
@@ -197,7 +197,6 @@ let rec main () =
     if !output_mode <> `Not_set then
       error (f_"%s option used more than once on the command line") "-o";
     match mode with
-    | "glance" -> output_mode := `Glance
     | "kubevirt" -> output_mode := `Kubevirt
     | "libvirt" -> output_mode := `Libvirt
     | "disk" | "local" -> output_mode := `Disk
@@ -257,7 +256,7 @@ let rec main () =
       s_"Map network ‘in’ to ‘out’";
     [ L"no-trim" ],  Getopt.String ("-", no_trim_warning),
       s_"Ignored for backwards compatibility";
-    [ S 'o' ],       Getopt.String ("glance|kubevirt|libvirt|local|null|openstack|qemu|rhv|rhv-upload|vdsm", set_output_mode),
+    [ S 'o' ],       Getopt.String ("kubevirt|libvirt|local|null|openstack|qemu|rhv|rhv-upload|vdsm", set_output_mode),
       s_"Set output mode (default: libvirt)";
     [ M"oa" ],       Getopt.String ("sparse|preallocated", set_output_alloc),
                                     s_"Set output allocation mode";
@@ -325,8 +324,6 @@ virt-v2v -i libvirtxml guest-domain.xml -o local -os /var/tmp
 
 virt-v2v -i disk disk.img -o local -os /var/tmp
 
-virt-v2v -i disk disk.img -o glance
-
 There is a companion front-end called \"virt-p2v\" which comes as an
 ISO or CD image that can be booted on physical machines.
 
@@ -401,7 +398,6 @@ read the man page virt-v2v(1).
       pr "input:libvirtxml\n";
       pr "input:ova\n";
       pr "input:vmx\n";
-      pr "output:glance\n";
       pr "output:kubevirt\n";
       pr "output:libvirt\n";
       pr "output:local\n";
@@ -498,7 +494,6 @@ read the man page virt-v2v(1).
     | `Disk -> (module Output_disk.Disk)
     | `Null -> (module Output_null.Null)
     | `QEmu -> (module Output_qemu.QEMU)
-    | `Glance -> (module Output_glance.Glance)
     | `Kubevirt -> (module Output_kubevirt.Kubevirt)
     | `Openstack -> (module Output_openstack.Openstack)
     | `RHV_Upload -> (module Output_rhv_upload.RHVUpload)