diff --git a/0001-usbredirhost-Don-t-set-a-timeout-on-bulk-transfers.patch b/0001-usbredirhost-Don-t-set-a-timeout-on-bulk-transfers.patch
new file mode 100644
index 0000000..f0c210d
--- /dev/null
+++ b/0001-usbredirhost-Don-t-set-a-timeout-on-bulk-transfers.patch
@@ -0,0 +1,47 @@
+From 7783d3db61083bbf7f61b1ea8608c666b4c6a1dd Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Fri, 22 Jun 2012 11:48:37 +0200
+Subject: [PATCH 1/5] usbredirhost: Don't set a timeout on bulk transfers
+
+Bulk packets can be (ab)used as interrupt transfers without timing guarantees,
+iow you can submit a bulk in transfer and let it be submitted until the
+device has data to reports a few eons later.
+
+This is used by (some?) USB cdc-acm devices (modems, smartcard readers, gps
+devices), specifically a smartcard reader I've been debugging, which currently
+does not work.
+
+Not setting a timeout at the usb-host side fixes these devices. For devices
+where timeouts do make sense, the timeouts should be handled by the usb-guest,
+which has device specific knowledge we lack.
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ usbredirhost/usbredirhost.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/usbredirhost/usbredirhost.c b/usbredirhost/usbredirhost.c
+index 8b0c1ba..be75f87 100644
+--- a/usbredirhost/usbredirhost.c
++++ b/usbredirhost/usbredirhost.c
+@@ -31,7 +31,7 @@
+ #define MAX_ENDPOINTS        32
+ #define MAX_INTERFACES       32 /* Max 32 endpoints and thus interfaces */
+ #define CTRL_TIMEOUT       5000 /* USB specifies a 5 second max timeout */
+-#define BULK_TIMEOUT       5000
++#define BULK_TIMEOUT          0 /* No timeout for bulk transfers */
+ #define ISO_TIMEOUT        1000
+ #define INTERRUPT_TIMEOUT     0 /* No timeout for interrupt transfers */
+ 
+@@ -2017,7 +2017,7 @@ static void usbredirhost_bulk_packet(void *priv, uint32_t id,
+     libusb_fill_bulk_transfer(transfer->transfer, host->handle, ep,
+                               data, bulk_packet->length,
+                               usbredirhost_bulk_packet_complete,
+-                              transfer, CTRL_TIMEOUT);
++                              transfer, BULK_TIMEOUT);
+     transfer->id = id;
+     transfer->bulk_packet = *bulk_packet;
+ 
+-- 
+1.7.11.2
+
diff --git a/0002-usbredirhost-Properly-log-an-error-when-the-initial-.patch b/0002-usbredirhost-Properly-log-an-error-when-the-initial-.patch
new file mode 100644
index 0000000..944ecb6
--- /dev/null
+++ b/0002-usbredirhost-Properly-log-an-error-when-the-initial-.patch
@@ -0,0 +1,36 @@
+From cb74b3113076d6e18c799a0c73978e1aea32bad0 Mon Sep 17 00:00:00 2001
+From: Hans de Goede <hdegoede@redhat.com>
+Date: Fri, 6 Jul 2012 14:25:48 +0200
+Subject: [PATCH 2/5] usbredirhost: Properly log an error when the initial
+ device reset fails
+
+Signed-off-by: Hans de Goede <hdegoede@redhat.com>
+---
+ TODO                        | 1 +
+ usbredirhost/usbredirhost.c | 1 +
+ 2 files changed, 2 insertions(+)
+
+diff --git a/TODO b/TODO
+index e6715b1..2085006 100644
+--- a/TODO
++++ b/TODO
+@@ -4,3 +4,4 @@
+ * cancel pending packets / active streams before reset?
+ * add a queue_buf call to parser, use it in host to avoid memcpy of
+   "in" bulk transfers
++* use libusb strerror equivalent instead of numeric error codes in logs
+diff --git a/usbredirhost/usbredirhost.c b/usbredirhost/usbredirhost.c
+index be75f87..2415c26 100644
+--- a/usbredirhost/usbredirhost.c
++++ b/usbredirhost/usbredirhost.c
+@@ -707,6 +707,7 @@ int usbredirhost_set_device(struct usbredirhost *host,
+        so lets do that before hand */
+     r = libusb_reset_device(host->handle);
+     if (r != 0) {
++        ERROR("resetting device: %d", r);
+         usbredirhost_clear_device(host);
+         return libusb_status_or_error_to_redir_status(host, r);
+     }
+-- 
+1.7.11.2
+
diff --git a/usbredir.spec b/usbredir.spec
index 42bff7f..e124222 100644
--- a/usbredir.spec
+++ b/usbredir.spec
@@ -1,11 +1,13 @@
 Name:           usbredir
 Version:        0.4.3
-Release:        2%{?dist}
+Release:        3%{?dist}
 Summary:        USB network redirection protocol libraries
 Group:          System Environment/Libraries
 License:        LGPLv2+
 URL:            http://spice-space.org/page/UsbRedir
 Source0:        http://spice-space.org/download/%{name}/%{name}-%{version}.tar.bz2
+Patch1:         0001-usbredirhost-Don-t-set-a-timeout-on-bulk-transfers.patch
+Patch2:         0002-usbredirhost-Properly-log-an-error-when-the-initial-.patch
 BuildRequires:  libusb1-devel >= 1.0.9
 
 %description
@@ -45,6 +47,8 @@ A simple USB host TCP server, using libusbredirhost.
 
 %prep
 %setup -q
+%patch1 -p1
+%patch2 -p1
 
 
 %build
@@ -62,25 +66,25 @@ rm $RPM_BUILD_ROOT%{_libdir}/libusbredir*.la
 
 
 %files
-%defattr(-,root,root,-)
 %doc ChangeLog COPYING.LIB README TODO 
 %{_libdir}/libusbredir*.so.*
 
 %files devel
-%defattr(-,root,root,-)
 %doc usb-redirection-protocol.txt README.multi-thread
 %{_includedir}/usbredir*.h
 %{_libdir}/libusbredir*.so
 %{_libdir}/pkgconfig/libusbredir*.pc
 
 %files server
-%defattr(-,root,root,-)
 %doc COPYING
 %{_sbindir}/usbredirserver
 %{_mandir}/man1/usbredirserver.1*
 
 
 %changelog
+* Mon Jul 30 2012 Hans de Goede <hdegoede@redhat.com> - 0.4.3-3
+- Add 2 fixes from upstream fixing issues with some bulk devices (rhbz#842358)
+
 * Sun Jul 22 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.4.3-2
 - Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild