Update device_reference.txt
This commit is contained in:
Till Maas
parent
cfc953b88f
commit
0b0c2da0cd
74
device_reference-utf8.patch
Normal file
74
device_reference-utf8.patch
Normal file
@ -0,0 +1,74 @@
|
||||
--- device_reference.txt 2014-05-29 22:18:46.000000000 +0200
|
||||
+++ device_reference_utf8.txt 2014-11-24 20:51:17.647221466 +0100
|
||||
@@ -60,7 +60,7 @@
|
||||
########################################################
|
||||
# Option GlobeTrotter GT MAX 3.6 (aka "T-Mobile Web'n'walk Card Compact II")
|
||||
#
|
||||
-# Contributor: Bernd Holzmüller
|
||||
+# Contributor: Bernd Holzmüller
|
||||
|
||||
DefaultVendor= 0x05c6
|
||||
DefaultProduct= 0x1000
|
||||
@@ -279,7 +279,7 @@
|
||||
#
|
||||
# Probably works with DetachStorageOnly too
|
||||
#
|
||||
-# Contributor: Flávio Moringa and others
|
||||
+# Contributor: Flávio Moringa and others
|
||||
|
||||
DefaultVendor= 0x19d2
|
||||
DefaultProduct= 0x2000
|
||||
@@ -777,7 +777,7 @@
|
||||
#
|
||||
# Recommended init command: ATE0V1&D2&C1S0=0
|
||||
#
|
||||
-# Contributor: Jérôme Oufella
|
||||
+# Contributor: Jérôme Oufella
|
||||
|
||||
DefaultVendor= 0x1004
|
||||
DefaultProduct= 0x1000
|
||||
@@ -1336,7 +1336,7 @@
|
||||
########################################################
|
||||
# LG HDM-2100 (EVDO Rev.A USB modem)
|
||||
#
|
||||
-# Contributor: Jérôme Oufella
|
||||
+# Contributor: Jérôme Oufella
|
||||
|
||||
DefaultVendor= 0x1004
|
||||
DefaultProduct=0x607f
|
||||
@@ -1641,7 +1641,7 @@
|
||||
########################################################
|
||||
# Huawei U8110 / U8300 / Joy, Vodafone 845 (Android smartphone)
|
||||
#
|
||||
-# Contributor: David Erosa GarcÃÂa
|
||||
+# Contributor: David Erosa García
|
||||
|
||||
DefaultVendor= 0x12d1
|
||||
DefaultProduct=0x1031
|
||||
@@ -1658,7 +1658,7 @@
|
||||
########################################################
|
||||
# Nokia CS-10
|
||||
#
|
||||
-# Contributor: Wacław Sierek
|
||||
+# Contributor: Wacław Sierek
|
||||
|
||||
DefaultVendor= 0x0421
|
||||
DefaultProduct=0x060c
|
||||
@@ -1700,7 +1700,7 @@
|
||||
#######################################################
|
||||
# Samsung GT-B3730
|
||||
#
|
||||
-# Contributor: Per Øyvind Karlsen
|
||||
+# Contributor: Per Øyvind Karlsen
|
||||
|
||||
DefaultVendor= 0x04e8
|
||||
DefaultProduct=0x689a
|
||||
@@ -1771,7 +1771,7 @@
|
||||
#######################################################
|
||||
# Huawei EC168C (from Zantel)
|
||||
#
|
||||
-# Contributor: Ã…smund Hjulstad
|
||||
+# Contributor: Åsmund Hjulstad
|
||||
|
||||
DefaultVendor= 0x12d1
|
||||
DefaultProduct=0x1446
|
||||
@ -1,7 +1,7 @@
|
||||
#
|
||||
# Device and Configuration Reference (UTF-8 encoding used)
|
||||
# Device Reference (UTF-8 encoding used)
|
||||
#
|
||||
# Last modified: 2013-11-13
|
||||
# Last modified: 2014-05-29
|
||||
#
|
||||
# Collection of configurations for usb_modeswitch, a mode switching
|
||||
# tool for controlling flip flop (multiple mode) USB devices
|
||||
@ -21,191 +21,14 @@
|
||||
# # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
|
||||
|
||||
|
||||
# For custom settings:
|
||||
# Numbers can be decimal or hexadecimal, MessageStrings MUST be
|
||||
# hexadecimal without prepended "0x". Digits 9-16 in the known
|
||||
# MessageStrings are arbitrary; I set them to "12345678"
|
||||
|
||||
# What it all means (short command line flags appended):
|
||||
#
|
||||
#
|
||||
# * DefaultVendor -v <hex number>
|
||||
# * DefaultProduct -p <hex number>
|
||||
#
|
||||
# This is the ID the USB device shows after having been plugged in.
|
||||
# The program needs this, either on the command line or in the config
|
||||
# file; if not found -> no action.
|
||||
#
|
||||
#
|
||||
# * TargetVendor -V <hex number>
|
||||
# * TargetProduct -P <hex number>
|
||||
#
|
||||
# These are the IDs of the USB device after successful mode switching.
|
||||
# They are optional, but I recommend to provide them for better analysis.
|
||||
# You definitely need them if you enable CheckSuccess (see below)
|
||||
#
|
||||
#
|
||||
# * TargetProductList (file only) <comma separated hex strings>
|
||||
#
|
||||
# Like TargetProduct, but more than one possibility. Only used in automated
|
||||
# config files (in /etc/usb_modeswitch.d).
|
||||
#
|
||||
#
|
||||
# * TargetClass -C <hex number>
|
||||
#
|
||||
# Some weird devices don't change IDs. They only switch the device class.
|
||||
# If the device has the target class -> no action (and vice versa)
|
||||
#
|
||||
#
|
||||
# * MessageEndpoint -m <hex number>
|
||||
#
|
||||
# A kind of address inside the interface to which the "message"
|
||||
# (the sequence that does the actual switching) is directed.
|
||||
# Obsolete since version 0.9.7, only useful for testing
|
||||
#
|
||||
#
|
||||
# * MessageContent -M <hex string>
|
||||
#
|
||||
# A hex string containing the "message" sequence; it will be
|
||||
# sent as a USB bulk transfer
|
||||
#
|
||||
#
|
||||
# * MessageContent2, ...3 -2/-3 <hex string>
|
||||
#
|
||||
# Additional "messages". Use with "NeedResponse"!
|
||||
#
|
||||
#
|
||||
# * ReleaseDelay -w <milliseconds>
|
||||
#
|
||||
# Waiting time after message transfers. Helps with some sensitive devices
|
||||
# that don't want any traffic after the mode switch initialisation
|
||||
#
|
||||
#
|
||||
# * ResponseEndpoint -r <hex number>
|
||||
# * NeedResponse <0/1> -n
|
||||
#
|
||||
# Some devices were reported to require receiving the response of the
|
||||
# bulk transfer to do the switching properly. Usually not needed.
|
||||
# Starting from version 1.0.0 the ResponseEndpoint is autodetected
|
||||
# if not given
|
||||
#
|
||||
#
|
||||
# * DetachStorageOnly <0/1> -d
|
||||
#
|
||||
# Some early devices just needed to be detached from the usb-storage
|
||||
# driver to initiate the mode switching. Now paractically obsolete for
|
||||
# switching, but still comes handy sometimes
|
||||
#
|
||||
#
|
||||
# * HuaweiMode <0/1> -H
|
||||
#
|
||||
# Some early Huawei devices can be switched by a special control
|
||||
# message. Don't use with recent devices
|
||||
#
|
||||
#
|
||||
# * SonyMode <0/1> -O
|
||||
#
|
||||
# Some Sony-Ericsson devices can be switched by a special control
|
||||
# message. May take a long time (20+ seconds).
|
||||
#
|
||||
#
|
||||
# * SierraMode <0/1> -S
|
||||
# * KobilMode <0/1> -T
|
||||
# * GCTMode <0/1> -G
|
||||
# * SequansMode <0/1> -N
|
||||
# * MobileActionMode <0/1> -A
|
||||
# * QisdaMode <0/1> -B
|
||||
# * QuantaMode <0/1> -E
|
||||
# * PantechMode <0/1> -F
|
||||
# * BlackberryMode <0/1> -Z
|
||||
# * CiscoMode <0/1> -L
|
||||
#
|
||||
#
|
||||
# Flags to support devices that need special control messages.
|
||||
# The names are referring to the respective manufacturers.
|
||||
#
|
||||
#
|
||||
# * ResetUSB <0/1> -R
|
||||
#
|
||||
# Few devices or systems need a rougher treatment. If the switching seems
|
||||
# to do something but your system does not reflect it, try this somewhat
|
||||
# brutal method to do a reset after switching.
|
||||
# Mind that if your device switched OK before, this may set it back to
|
||||
# storage mode ...
|
||||
#
|
||||
#
|
||||
# * Interface -i <hex number>
|
||||
# * Configuration -u <hex number>
|
||||
# * AltSetting -a <hex number>
|
||||
#
|
||||
# More USB parameter to help with tricky devices and for doing lots
|
||||
# of cruel experiments ...
|
||||
#
|
||||
## Note:
|
||||
## AltSetting/Configuration changes and ResetUSB are executed after all
|
||||
## other steps and can be combined or used on their own (e.g. a reset
|
||||
## might have the same effect as a manual replug)
|
||||
#
|
||||
#
|
||||
# * InquireDevice <0|1> -I (disables inquiry)
|
||||
#
|
||||
# The standard since 1.0.0 is to do a SCSI inquiry on the default device
|
||||
# before other actions. This might be a future way to identify a device
|
||||
# without ambiguities. If it causes trouble with your device, just disable.
|
||||
#
|
||||
#
|
||||
# * CheckSuccess -s <number>
|
||||
#
|
||||
# Check continuously if the switch succeeded for max <number> seconds.
|
||||
# First, an interface access test: most devices vanish after
|
||||
# switching and can't be accessed anymore.
|
||||
# Second, a recount of target devices: one more than at the initial
|
||||
# count, at the same bus with a higher device number -> device
|
||||
# switched fine.
|
||||
# It's safe to give a higher value than needed; checking stops as
|
||||
# soon as the target device is found
|
||||
#
|
||||
#
|
||||
# * NoDriverLoading <0|1> (no command line parameter)
|
||||
#
|
||||
# The binary tells the wrapper script NOT to check for and initiate
|
||||
# binding of the serial driver after switching.
|
||||
# Mostly useful for non-modem devices.
|
||||
#
|
||||
#
|
||||
# * WaitBefore <seconds> (no command line parameter)
|
||||
#
|
||||
# Waiting time before taking any action. Helps with some sensitive setups.
|
||||
#
|
||||
#
|
||||
# * NoMBIMCheck <0|1> (no command line parameter)
|
||||
#
|
||||
# Disable the check for new MBIM standard devices, which is always done
|
||||
# by default.
|
||||
#
|
||||
#
|
||||
#
|
||||
# -> All other entries in config files are just ignored <-
|
||||
|
||||
# Additional command line flags:
|
||||
#
|
||||
# Verbose output -W
|
||||
# No output at all -q
|
||||
# Use config file -c <file>
|
||||
# Use stdin for long config -t
|
||||
# Give long config as string -f <multiline string using config file syntax>
|
||||
# Give bus number for ID'ing -b
|
||||
# Give dev number for ID'ing -g
|
||||
|
||||
|
||||
# For filling in all this information for an unknown device,
|
||||
# see instructions and links on the homepage:
|
||||
# http://www.draisberghof.de/usb_modeswitch
|
||||
# For a parameter reference see file REFERENCE in the data package
|
||||
#
|
||||
# If you find working codes and configurations, please contribute
|
||||
# them!
|
||||
|
||||
|
||||
|
||||
|
||||
#######################################################
|
||||
# Option GlobeSurfer Icon (aka "Vodafone EasyBox")
|
||||
#
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
|
||||
Name: usb_modeswitch
|
||||
Version: 2.2.0
|
||||
Release: 1%{?dist}
|
||||
Release: 2%{?dist}
|
||||
Summary: USB Modeswitch gets mobile broadband cards in operational mode
|
||||
Summary(de): USB Modeswitch aktiviert UMTS-Karten
|
||||
Group: Applications/System
|
||||
@ -13,6 +13,8 @@ Source0: http://www.draisberghof.de/%{name}/%{source_name}-%{version}.tar.bz2
|
||||
Source1: http://www.draisberghof.de/usb_modeswitch/device_reference.txt
|
||||
|
||||
Patch0: rhbz948451-fix-manual-pages.patch
|
||||
# Submitted upstream (2014-11-24)
|
||||
Patch1: device_reference-utf8.patch
|
||||
|
||||
BuildRequires: libusbx-devel
|
||||
BuildRequires: jimtcl-devel
|
||||
@ -39,12 +41,8 @@ Vodafone, Option, ZTE und Novatell werden unterstützt.
|
||||
#%patch0 -p1 -b .manpage
|
||||
|
||||
cp -f %{SOURCE1} device_reference.txt
|
||||
%patch1 -p0 -b .utf8
|
||||
|
||||
# convert device_reference.txt encoding to UTF-8
|
||||
iconv --from=ISO-8859-1 --to=UTF-8 device_reference.txt > device_reference.txt.new && \
|
||||
touch -r device_reference.txt device_reference.txt.new && \
|
||||
chmod 644 device_reference.txt && \
|
||||
mv device_reference.txt.new device_reference.txt
|
||||
|
||||
%build
|
||||
CFLAGS="$RPM_OPT_FLAGS" make %{?_smp_mflags}
|
||||
@ -75,6 +73,9 @@ install -p -m 755 usb_modeswitch.sh $RPM_BUILD_ROOT%{_prefix}/lib/udev/usb_modes
|
||||
|
||||
|
||||
%changelog
|
||||
* Mon Nov 24 2014 Till Maas <opensource@till.name> - 2.2.0-2
|
||||
- Update device_reference.txt, make it proper UTF-8
|
||||
|
||||
* Tue Aug 26 2014 Robert M. Albrecht <mail@romal.de> - 2.2.0-1
|
||||
- New upstream release
|
||||
- Fixed a typo in the description
|
||||
|
||||
Loading…
Reference in New Issue
Block a user