Update device_reference.txt

device_reference-utf8.patch

@@ -0,0 +1,74 @@
+--- device_reference.txt	2014-05-29 22:18:46.000000000 +0200
++++ device_reference_utf8.txt	2014-11-24 20:51:17.647221466 +0100
+@@ -60,7 +60,7 @@
+ ########################################################
+ # Option GlobeTrotter GT MAX 3.6 (aka "T-Mobile Web'n'walk Card Compact II")
+ #
+-# Contributor: Bernd Holzmüller
++# Contributor: Bernd Holzmüller
+ 
+ DefaultVendor=  0x05c6
+ DefaultProduct= 0x1000
+@@ -279,7 +279,7 @@
+ #
+ # Probably works with DetachStorageOnly too
+ #
+-# Contributor: Flávio Moringa and others
++# Contributor: Flávio Moringa and others
+ 
+ DefaultVendor=  0x19d2
+ DefaultProduct= 0x2000
+@@ -777,7 +777,7 @@
+ #
+ # Recommended init command: ATE0V1&D2&C1S0=0
+ #
+-# Contributor: Jérôme Oufella
++# Contributor: Jérôme Oufella
+ 
+ DefaultVendor=  0x1004
+ DefaultProduct= 0x1000
+@@ -1336,7 +1336,7 @@
+ ########################################################
+ # LG HDM-2100 (EVDO Rev.A USB modem)
+ #
+-# Contributor: Jérôme Oufella
++# Contributor: Jérôme Oufella
+ 
+ DefaultVendor= 0x1004
+ DefaultProduct=0x607f
+@@ -1641,7 +1641,7 @@
+ ########################################################
+ # Huawei U8110 / U8300 / Joy, Vodafone 845 (Android smartphone)
+ #
+-# Contributor: David Erosa García
++# Contributor: David Erosa García
+ 
+ DefaultVendor= 0x12d1
+ DefaultProduct=0x1031
+@@ -1658,7 +1658,7 @@
+ ########################################################
+ # Nokia CS-10
+ #
+-# Contributor: Wacław Sierek
++# Contributor: Wacław Sierek
+ 
+ DefaultVendor= 0x0421
+ DefaultProduct=0x060c
+@@ -1700,7 +1700,7 @@
+ #######################################################
+ # Samsung GT-B3730
+ #
+-# Contributor: Per Øyvind Karlsen
++# Contributor: Per Øyvind Karlsen
+ 
+ DefaultVendor= 0x04e8
+ DefaultProduct=0x689a
+@@ -1771,7 +1771,7 @@
+ #######################################################
+ # Huawei EC168C (from Zantel)
+ #
+-# Contributor: Ã…smund Hjulstad
++# Contributor: Åsmund Hjulstad
+ 
+ DefaultVendor= 0x12d1
+ DefaultProduct=0x1446

device_reference.txt

@@ -1,7 +1,7 @@
 #
-# Device and Configuration Reference (UTF-8 encoding used)
+# Device Reference (UTF-8 encoding used)
 #
-# Last modified: 2013-11-13
+# Last modified: 2014-05-29
 #
 # Collection of configurations for usb_modeswitch, a mode switching
 # tool for controlling flip flop (multiple mode) USB devices
@@ -21,191 +21,14 @@
 # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # # #
 
 
-# For custom settings:
+# For a parameter reference see file REFERENCE in the data package
-# Numbers can be decimal or hexadecimal, MessageStrings MUST be
-# hexadecimal without prepended "0x". Digits 9-16 in the known
-# MessageStrings are arbitrary; I set them to "12345678"
-
-# What it all means (short command line flags appended):
-#
-#
-# * DefaultVendor            -v <hex number>
-# * DefaultProduct           -p <hex number>
-#
-# This is the ID the USB device shows after having been plugged in.
-# The program needs this, either on the command line or in the config
-# file; if not found -> no action.
-#
-#
-# * TargetVendor             -V <hex number>
-# * TargetProduct            -P <hex number>
-#
-# These are the IDs of the USB device after successful mode switching.
-# They are optional, but I recommend to provide them for better analysis.
-# You definitely need them if you enable CheckSuccess (see below)
-#
-#
-# * TargetProductList        (file only) <comma separated hex strings>
-#
-# Like TargetProduct, but more than one possibility. Only used in automated
-# config files (in /etc/usb_modeswitch.d).
-#
-#
-# * TargetClass              -C <hex number>
-#
-# Some weird devices don't change IDs. They only switch the device class.
-# If the device has the target class -> no action (and vice versa)
-#
-#
-# * MessageEndpoint          -m <hex number>
-#
-# A kind of address inside the interface to which the "message"
-# (the sequence that does the actual switching) is directed.
-# Obsolete since version 0.9.7, only useful for testing
-#
-#
-# * MessageContent           -M <hex string>
-#
-# A hex string containing the "message" sequence; it will be
-# sent as a USB bulk transfer
-#
-#
-# * MessageContent2, ...3    -2/-3 <hex string>
-#
-# Additional "messages". Use with "NeedResponse"!
-#
-#
-# * ReleaseDelay             -w <milliseconds>
-#
-# Waiting time after message transfers. Helps with some sensitive devices
-# that don't want any traffic after the mode switch initialisation
-#
-#
-# * ResponseEndpoint         -r <hex number>
-# * NeedResponse <0/1>       -n
-#
-# Some devices were reported to require receiving the response of the
-# bulk transfer to do the switching properly. Usually not needed.
-# Starting from version 1.0.0 the ResponseEndpoint is autodetected
-# if not given
-#
-#
-# * DetachStorageOnly <0/1>  -d
-#
-# Some early devices just needed to be detached from the usb-storage
-# driver to initiate the mode switching. Now paractically obsolete for
-# switching, but still comes handy sometimes
-#
-#
-# * HuaweiMode <0/1>         -H
-#
-# Some early Huawei devices can be switched by a special control
-# message. Don't use with recent devices
-#
-#
-# * SonyMode <0/1>           -O
-#
-# Some Sony-Ericsson devices can be switched by a special control
-# message. May take a long time (20+ seconds).
-#
-#
-# * SierraMode <0/1>         -S
-# * KobilMode <0/1>          -T
-# * GCTMode <0/1>            -G
-# * SequansMode <0/1>        -N
-# * MobileActionMode <0/1>   -A
-# * QisdaMode <0/1>          -B
-# * QuantaMode <0/1>         -E
-# * PantechMode <0/1>        -F
-# * BlackberryMode <0/1>     -Z
-# * CiscoMode <0/1>          -L
-#
-#
-# Flags to support devices that need special control messages.
-# The names are referring to the respective manufacturers.
-#
-#
-# * ResetUSB <0/1>           -R
-#
-# Few devices or systems need a rougher treatment. If the switching seems
-# to do something but your system does not reflect it, try this somewhat
-# brutal method to do a reset after switching.
-# Mind that if your device switched OK before, this may set it back to
-# storage mode ...
-#
-#
-# * Interface                -i <hex number>
-# * Configuration            -u <hex number>
-# * AltSetting               -a <hex number>
-#
-# More USB parameter to help with tricky devices and for doing lots
-# of cruel experiments ...
-#
-## Note:
-## AltSetting/Configuration changes and ResetUSB are executed after all
-## other steps and can be combined or used on their own (e.g. a reset
-## might have the same effect as a manual replug)
-#
-#
-# * InquireDevice <0|1>      -I (disables inquiry)
-#
-# The standard since 1.0.0 is to do a SCSI inquiry on the default device
-# before other actions. This might be a future way to identify a device
-# without ambiguities. If it causes trouble with your device, just disable.
-#
-#
-# * CheckSuccess             -s <number>
-#
-# Check continuously if the switch succeeded for max <number> seconds.
-# First, an interface access test: most devices vanish after
-# switching and can't be accessed anymore.
-# Second, a recount of target devices: one more than at the initial
-# count, at the same bus with a higher device number -> device
-# switched fine.
-# It's safe to give a higher value than needed; checking stops as
-# soon as the target device is found
-#
-#
-# * NoDriverLoading <0|1>    (no command line parameter)
-#
-# The binary tells the wrapper script NOT to check for and initiate
-# binding of the serial driver after switching.
-# Mostly useful for non-modem devices.
-#
-#
-# * WaitBefore <seconds>     (no command line parameter)
-#
-# Waiting time before taking any action. Helps with some sensitive setups.
-#
-#
-# * NoMBIMCheck <0|1>        (no command line parameter)
-#
-# Disable the check for new MBIM standard devices, which is always done
-# by default.
-#
-#
-#
-# -> All other entries in config files are just ignored <-
-
-# Additional command line flags:
-#
-# Verbose output             -W
-# No output at all           -q
-# Use config file            -c <file>
-# Use stdin for long config  -t
-# Give long config as string -f <multiline string using config file syntax>
-# Give bus number for ID'ing -b
-# Give dev number for ID'ing -g
-
-
-# For filling in all this information for an unknown device,
-# see instructions and links on the homepage:
-# http://www.draisberghof.de/usb_modeswitch
 #
 # If you find working codes and configurations, please contribute
 # them!
 
 
+
+
 #######################################################
 # Option GlobeSurfer Icon (aka "Vodafone EasyBox")
 #

usb_modeswitch.spec

@@ -2,7 +2,7 @@
 
 Name:		usb_modeswitch
 Version:	2.2.0
-Release:	1%{?dist}
+Release:	2%{?dist}
 Summary:	USB Modeswitch gets mobile broadband cards in operational mode
 Summary(de):	USB Modeswitch aktiviert UMTS-Karten
 Group:		Applications/System
@@ -13,6 +13,8 @@ Source0:	http://www.draisberghof.de/%{name}/%{source_name}-%{version}.tar.bz2
 Source1:	http://www.draisberghof.de/usb_modeswitch/device_reference.txt
 
 Patch0: rhbz948451-fix-manual-pages.patch
+# Submitted upstream (2014-11-24)
+Patch1: device_reference-utf8.patch
 
 BuildRequires:	libusbx-devel
 BuildRequires:	jimtcl-devel
@@ -39,12 +41,8 @@ Vodafone, Option, ZTE und Novatell werden unterstützt.
 #%patch0 -p1 -b .manpage
 
 cp -f %{SOURCE1} device_reference.txt
+%patch1 -p0 -b .utf8
 
-# convert device_reference.txt encoding to UTF-8
-iconv --from=ISO-8859-1 --to=UTF-8 device_reference.txt > device_reference.txt.new && \
-touch -r device_reference.txt device_reference.txt.new && \
-chmod 644 device_reference.txt && \
-mv device_reference.txt.new device_reference.txt
 
 %build
 CFLAGS="$RPM_OPT_FLAGS" make %{?_smp_mflags}
@@ -75,6 +73,9 @@ install -p -m 755 usb_modeswitch.sh $RPM_BUILD_ROOT%{_prefix}/lib/udev/usb_modes
 
 
 %changelog
+* Mon Nov 24 2014 Till Maas <opensource@till.name> - 2.2.0-2
+- Update device_reference.txt, make it proper UTF-8
+
 * Tue Aug 26 2014 Robert M. Albrecht <mail@romal.de> - 2.2.0-1
 - New upstream release
 - Fixed a typo in the description