initial srpm import of unbound

.cvsignore

@@ -0,0 +1 @@
+unbound-1.0.2.tar.gz

import.log

@@ -0,0 +1 @@
+unbound-1_0_2-5_fc9:HEAD:unbound-1.0.2-5.fc9.src.rpm:1225492139

sources

@@ -0,0 +1 @@
+01b08a9c0d24be981de64b6e4e25ecbe  unbound-1.0.2.tar.gz

unbound.conf

@@ -0,0 +1,365 @@
+#
+#
+# See unbound.conf(5) man page.
+#
+# this is a comment.
+
+#Use this to include other text into the file.
+#include: "otherfile.conf"
+
+#
+# The server clause sets the main parameters. 
+server:
+	# whitespace is not necessary, but looks cleaner.
+
+	# To enable DNSSEC trust anchors, install the dnssec-keys package and
+	# uncomment the line below - note chroot breaks this
+	# trusted-keys-file: "/etc/pki/dnssec/allkeys.conf"
+
+	# verbosity number, 0 is least verbose. 1 is default.
+	verbosity: 1
+
+	# print statistics to the log (for every thread) every N seconds.
+	# Set to "" or 0 to disable. Default is disabled.
+	statistics-interval: 3600
+	
+	# enable cumulative statistics, without clearing them after printing.
+	# statistics-cumulative: no
+
+	# number of threads to create. 1 disables threading.
+	num-threads: 2
+
+	# specify the interfaces to answer queries from by ip-address.
+	# The default is to listen to localhost (127.0.0.1 and ::1).
+	# specify 0.0.0.0 and ::0 to bind to all available interfaces.
+	# specify every interface on a new 'interface:' labelled line.
+	# The listen interfaces are not changed on reload, only on restart.
+	# interface: 192.0.2.153
+	# interface: 192.0.2.154
+	# interface: 2001:DB8::5
+	#
+	# interface: 0.0.0.0
+	# interface: ::0
+	
+	# enable this feature to copy the source address of queries to reply.
+	# Socket options not be supported on all platforms. experimental. 
+	# NOTE: Enable this option when specifying interface 0.0.0.0 or ::0 
+	# interface-automatic: yes
+
+	# port to answer queries from
+	# port: 53
+
+	# specify the interfaces to send outgoing queries to authoritative
+	# server from by ip-address. If none, the default (all) interface
+	# is used. Specify every interface on a 'outgoing-interface:' line.
+	# outgoing-interface: 192.0.2.153
+	# outgoing-interface: 2001:DB8::5
+	# outgoing-interface: 2001:DB8::6
+
+	# number of ports to allocate per thread, determines the size of the
+	# port range that can be open simultaneously. 
+	# outgoing-range: 256
+	
+	# permit unbound to use this port number or port range for
+	# making outgoing queries, using an outgoing interface.
+	# outgoing-port-permit: 32768
+
+	# deny unbound the use this of port number or port range for
+	# making outgoing queries, using an outgoing interface.
+	# Use this to make sure unbound does not grab a UDP port that some
+	# other server on this computer needs. The default is to avoid
+	# IANA-assigned port numbers.
+	# outgoing-port-avoid: "3200-3208"
+
+	# number of outgoing simultaneous tcp buffers to hold per thread.
+	# outgoing-num-tcp: 10
+
+	# number of incoming simultaneous tcp buffers to hold per thread.
+	# incoming-num-tcp: 10
+	
+	# buffer size for handling DNS data. No messages larger than this
+	# size can be sent or received, by UDP or TCP. In bytes.
+	# msg-buffer-size: 65552
+
+	# the amount of memory to use for the message cache.
+	# plain value in bytes or you can append k, m or G. default is "4Mb". 
+	# msg-cache-size: 4m
+
+	# the number of slabs to use for the message cache.
+	# the number of slabs must be a power of 2.
+	# more slabs reduce lock contention, but fragment memory usage.
+	# msg-cache-slabs: 4
+
+	# the number of queries that a thread gets to service.
+	# num-queries-per-thread: 1024
+
+	# the amount of memory to use for the RRset cache.
+	# plain value in bytes or you can append k, m or G. default is "4Mb". 
+	# rrset-cache-size: 4m
+
+	# the number of slabs to use for the RRset cache.
+	# the number of slabs must be a power of 2.
+	# more slabs reduce lock contention, but fragment memory usage.
+	# rrset-cache-slabs: 4
+	
+	# the time to live (TTL) value cap for RRsets and messages in the
+	# cache. Items are not cached for longer. In seconds.
+	# cache-max-ttl: 86400
+
+	# the time to live (TTL) value for cached roundtrip times and
+	# EDNS version information for hosts. In seconds.
+	# infra-host-ttl: 900
+
+	# the time to live (TTL) value for cached lame delegations. In sec.
+	# infra-lame-ttl: 900
+
+	# the number of slabs to use for the Infrastructure cache.
+	# the number of slabs must be a power of 2.
+	# more slabs reduce lock contention, but fragment memory usage.
+	# infra-cache-slabs: 4
+
+	# the maximum number of hosts that are cached (roundtrip times, EDNS).
+	# infra-cache-numhosts: 10000
+
+	# the maximum size of the lame zones cached per host. in bytes.
+	# infra-cache-lame-size: 10k
+
+	# Enable IPv4, "yes" or "no".
+	# do-ip4: yes
+
+	# Enable IPv6, "yes" or "no".
+	# do-ip6: yes
+
+	# Enable UDP, "yes" or "no".
+	# do-udp: yes
+
+	# Enable TCP, "yes" or "no".
+	# do-tcp: yes
+
+	# Detach from the terminal, run in background, "yes" or "no".
+	# do-daemonize: yes
+
+	# control which clients are allowed to make (recursive) queries
+	# to this server. Specify classless netblocks with /size and action.
+	# By default everything is refused, except for localhost.
+	# Choose deny (drop message), refuse (polite error reply), allow.
+	# access-control: 0.0.0.0/0 refuse
+	# access-control: 127.0.0.0/8 allow
+	# access-control: ::0/0 refuse
+	# access-control: ::1 allow
+	# access-control: ::ffff:127.0.0.1 allow
+	
+	# if given, a chroot(2) is done to the given directory.
+	# i.e. you can chroot to the working directory, for example,
+	# for extra security, but make sure all files are in that directory.
+	#
+	# If chroot is enabled, you should pass the configfile (from the
+	# commandline) as a full path from the original root. After the
+	# chroot has been performed the now defunct portion of the config 
+	# file path is removed to be able to reread the config after a reload. 
+	#
+	# All other file paths (working dir, pidfile, logfile, roothints,
+	# key files) can be specified in several ways:
+	# 	o as an absolute path relative to the new root.
+	# 	o as a relative path to the working directory.
+	# 	o as an absolute path relative to the original root.
+	# In the last case the path is adjusted to remove the unused portion.
+	#
+	# Additionally, unbound may need to access /dev/random (for entropy)
+	# and to /dev/log (if you use syslog) from inside the chroot.
+	# How to do this is specific to your OS.
+	#
+	# If you give "" no chroot is performed. The path must not end in a /.
+	chroot: "/var/lib/unbound"
+
+	# if given, user privileges are dropped (after binding port),
+	# and the given username is assumed. Default is user "unbound".
+	# If you give "" no privileges are dropped.
+	username: "unbound"
+
+	# the working directory. The relative files in this config are 
+	# relative to this directory. If you give "" the working directory
+	# is not changed.
+	# directory: "/var/lib/unbound"
+
+	# the log file, "" means log to stderr. 
+	# Use of this option sets use-syslog to "no".
+	# logfile: ""
+	
+	# Log to syslog(3) if yes. The log facility LOG_DAEMON is used to 
+	# log to, with identity "unbound". If yes, it overrides the logfile.
+	# use-syslog: yes 
+
+	# the pid file.
+	pidfile: "/var/run/unbound/unbound.pid"
+	
+	# file to read root hints from.
+	# get one from ftp://FTP.INTERNIC.NET/domain/named.cache
+	# root-hints: ""
+	
+	# enable to not answer id.server and hostname.bind queries.
+	# hide-identity: no
+	
+	# enable to not answer version.server and version.bind queries.
+	# hide-version: no
+	
+	# the identity to report. Leave "" or default to return hostname.
+	# identity: ""
+	
+	# the version to report. Leave "" or default to return package version.
+	# version: ""
+	
+	# the target fetch policy.
+	# series of integers describing the policy per dependency depth. 
+	# The number of values in the list determines the maximum dependency 
+	# depth the recursor will pursue before giving up. Each integer means:
+	# 	-1 : fetch all targets opportunistically,
+	# 	0: fetch on demand,
+	#	positive value: fetch that many targets opportunistically.
+	# Enclose the list of numbers between quotes ("").
+	# target-fetch-policy: "3 2 1 0 0"
+	
+	# Harden against very small EDNS buffer sizes. 
+	# harden-short-bufsize: no
+	
+	# Harden against unseemly large queries.
+	# harden-large-queries: no
+	
+	# Harden against out of zone rrsets, to avoid spoofing attempts. 
+	harden-glue: yes
+	
+	# Harden against receiving dnssec-stripped data. If you turn it
+	# off, failing to validate dnskey data for a trustanchor will 
+	# trigger insecure mode for that zone (like without a trustanchor).
+	# Default on, which insists on dnssec data for trust-anchored zones.
+	harden-dnssec-stripped: yes
+	
+	# Use 0x20-encoded random bits in the query to foil spoof attempts.
+	# Disabled by default, because some caching forwarders may not
+	# support this (if you have forward-zones). Most authority servers do.
+	# This feature is an experimental implementation of draft dns-0x20.
+	# It is known that some authority servers do not support 0x20, and
+	# resolution will fail for them. A solution is on the TODO list.
+	use-caps-for-id: no
+	
+	# Do not query the following addresses. No DNS queries are sent there.
+	# List one address per entry. List classless netblocks with /size,
+	# do-not-query-address: 127.0.0.1/8
+	# do-not-query-address: ::1
+	
+	# if yes, the above default do-not-query-address entries are present.
+	# if no, localhost can be queried (for testing and debugging).
+	# do-not-query-localhost: yes
+	
+	# module configuration of the server. A string with identifiers
+	# separated by spaces. "iterator" or "validator iterator"
+	# module-config: "validator iterator"
+	
+	# File with trusted keys for validation. Specify more than one file
+	# with several entries, one file per entry.
+	# Zone file format, with DS and DNSKEY entries.
+	# trust-anchor-file: ""
+	
+	# Trusted key for validation. DS or DNSKEY. specify the RR on a
+	# single line, surrounded by "". TTL is ignored. class is IN default.
+	# (These examples are from August 2007 and may not be valid anymore).
+	# trust-anchor: "nlnetlabs.nl. DNSKEY 257 3 5 AQPzzTWMz8qSWIQlfRnPckx2BiVmkVN6LPupO3mbz7FhLSnm26n6iG9N Lby97Ji453aWZY3M5/xJBSOS2vWtco2t8C0+xeO1bc/d6ZTy32DHchpW 6rDH1vp86Ll+ha0tmwyy9QP7y2bVw5zSbFCrefk8qCUBgfHm9bHzMG1U BYtEIQ=="
+	# trust-anchor: "jelte.nlnetlabs.nl. DS 42860 5 1 14D739EB566D2B1A5E216A0BA4D17FA9B038BE4A"
+
+	# File with trusted keys for validation. Specify more than one file
+	# with several entries, one file per entry. Like trust-anchor-file
+	# but has a different file format. Format is BIND-9 style format, 
+	# the trusted-keys { name flag proto algo "key"; }; clauses are read.
+	# trusted-keys-file: ""
+
+	# Override the date for validation with a specific fixed date.
+	# Do not set this unless you are debugging signature inception
+	# and expiration. "" or "0" turns the feature off. 
+	# val-override-date: ""
+	
+	# The time to live for bogus data, rrsets and messages. This avoids
+	# some of the revalidation, until the time interval expires. in secs.
+	# val-bogus-ttl: 900
+	
+	# Should additional section of secure message also be kept clean of
+	# unsecure data. Useful to shield the users of this validator from
+	# potential bogus data in the additional section. All unsigned data 
+	# in the additional section is removed from secure messages.
+	# val-clean-additional: yes
+	
+	# Turn permissive mode on to permit bogus messages. Thus, messages
+	# for which security checks failed will be returned to clients,
+	# instead of SERVFAIL. It still performs the security checks, which
+	# result in interesting log files and possibly the AD bit in
+	# replies if the message is found secure. The default is off.
+	val-permissive-mode: no
+	
+	# It is possible to configure NSEC3 maximum iteration counts per
+	# keysize. Keep this table very short, as linear search is done.
+	# A message with an NSEC3 with larger count is marked insecure.
+	# List in ascending order the keysize and count values.
+	# val-nsec3-keysize-iterations: "1024 150 2048 500 4096 2500"
+
+	# the amount of memory to use for the key cache.
+	# plain value in bytes or you can append k, m or G. default is "4Mb". 
+	# key-cache-size: 4m
+
+	# the number of slabs to use for the key cache.
+	# the number of slabs must be a power of 2.
+	# more slabs reduce lock contention, but fragment memory usage.
+	# key-cache-slabs: 4
+
+	# a number of locally served zones can be configured.
+	# 	local-zone: <zone> <type>
+	# 	local-data: "<resource record string>"
+	# o deny serves local data (if any), else, drops queries. 
+	# o refuse serves local data (if any), else, replies with error.
+	# o static serves local data, else, nxdomain or nodata answer.
+	# o transparent serves local data, else, resolves normally .
+	# o redirect serves the zone data for any subdomain in the zone.
+	# o nodefault can be used to normally resolve AS112 zones.
+	#
+	# defaults are localhost address, reverse for 127.0.0.1 and ::1
+	# and nxdomain for AS112 zones. If you configure one of these zones
+	# the default content is omitted, or you can omit it with 'nodefault'.
+	# 
+	# If you configure local-data without specifying local-zone, by
+	# default a transparent local-zone is created for the data.
+	#
+	# You can add locally served data with
+	# local-zone: "local." static
+	# local-data: "mycomputer.local. IN A 192.0.2.51"
+	# local-data: 'mytext.local TXT "content of text record"'
+	#
+	# You can override certain queries with
+	# local-data: "adserver.example.com A 127.0.0.1"
+	#
+	# You can redirect a domain to a fixed address with
+	# (this makes example.com, www.example.com, etc, all go to 192.0.2.3)
+	# local-zone: "example.com" redirect
+	# local-data: "example.com A 192.0.2.3"
+
+
+# Stub zones.
+# Create entries like below, to make all queries for 'example.com' and 
+# 'example.org' go to the given list of nameservers. list zero or more 
+# nameservers by hostname or by ipaddress.
+# stub-zone:
+#	name: "example.com"
+#	stub-addr: 192.0.2.68
+# stub-zone:
+#	name: "example.org"
+#	stub-host: ns.example.com.
+
+# Forward zones
+# Create entries like below, to make all queries for 'example.com' and
+# 'example.org' go to the given list of servers. These servers have to handle
+# recursion to other nameservers. List zero or more nameservers by hostname
+# or by ipaddress. Use an entry with name "." to forward all queries.
+# forward-zone:
+# 	name: "example.com"
+# 	forward-addr: 192.0.2.68
+# 	forward-addr: 192.0.2.73@5355  # forward to port 5355.
+# forward-zone:
+# 	name: "example.org"
+# 	forward-host: fwd.example.com

unbound.init

@@ -0,0 +1,119 @@
+#!/bin/sh
+#
+# unbound	This shell script takes care of starting and stopping
+#		unbound (DNS server).
+#
+# chkconfig:   - 14 86
+# description:	unbound is a Domain Name Server (DNS) \
+#		that is used to resolve host names to IP addresses.
+
+### BEGIN INIT INFO
+# Provides: unbound
+# Required-Start: $network $local_fs
+# Required-Stop: $network $local_fs
+# Should-Start: $syslog
+# Should-Stop: $syslog
+# Short-Description: unbound recursive Domain Name Server.
+# Description:  unbound is a Domain Name Server (DNS) 
+#		that is used to resolve host names to IP addresses.
+### END INIT INFO
+
+# Source function library.
+. /etc/rc.d/init.d/functions
+
+exec="/usr/sbin/unbound"
+config="/var/lib/unbound/unbound.conf"
+rootdir="/var/lib/unbound"
+pidfile="/var/run/unbound/unbound.pid"
+
+[ -e /etc/sysconfig/unbound ] && . /etc/sysconfig/unbound
+
+lockfile=/var/lock/subsys/unbound
+
+start() {
+    [ -x $exec ] || exit 5
+    [ -f $config ] || exit 6
+    echo -n $"Starting unbound: "
+
+	if [ ! -e ${rootdir}/etc/resolv.conf ] || /usr/bin/cmp -s /etc/resolv.conf ${rootdir}/etc/resolv.conf; then
+	    cp -fp /etc/resolv.conf ${rootdir}/etc/resolv.conf
+	fi;
+	if [ ! -e ${rootdir}/etc/localtime ] || /usr/bin/cmp -s /etc/localtime ${rootdir}/etc/localtime; then
+	    cp -fp /etc/localtime ${rootdir}/etc/localtime
+	fi;
+	mount --bind -n /dev/log ${rootdir}/dev/log >/dev/null 2>&1;
+	mount --bind -n /dev/random ${rootdir}/dev/random >/dev/null 2>&1;
+	mount --bind -n /var/run/unbound ${rootdir}/var/run/unbound >/dev/null 2>&1;
+
+    # if not running, start it up here
+    daemon $exec
+    retval=$?
+    [ $retval -eq 0 ] && touch $lockfile
+    echo
+}
+
+stop() {
+    echo -n $"Stopping unbound: "
+    # stop it here, often "killproc unbound"
+    killproc -p $pidfile unbound
+    retval=$?
+    [ $retval -eq 0 ] && rm -f $lockfile
+    for mountfile in /dev/log /dev/random /etc/localtime /etc/resolv.conf /var/run/unbound
+    do
+    if egrep -q '^/[^[:space:]]+[[:space:]]+'${rootdir}''${mountfile}'' /proc/mounts; then
+	umount ${rootdir}$mountfile >/dev/null 2>&1
+    fi;
+    done
+    echo
+}
+
+restart() {
+    stop
+    start
+}
+
+reload() {
+    kill -HUP `cat $pidfile`
+}
+
+force_reload() {
+    restart
+}
+
+rh_status() {
+    # run checks to determine if the service is running or use generic status
+    status -p $pidfile unbound
+}
+
+rh_status_q() {
+    rh_status -p $pidfile >/dev/null 2>&1
+}
+
+case "$1" in
+    start)
+        start
+        ;;
+    stop)
+        stop
+        ;;
+    restart)
+        restart
+        ;;
+    reload)
+        reload
+        ;;
+    force-reload)
+        force_reload
+        ;;
+    status)
+        rh_status
+        ;;
+    condrestart|try-restart)
+        rh_status_q || exit 0
+        restart
+        ;;
+    *)
+        echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload}"
+        exit 2
+esac
+exit $?

unbound.spec

@@ -0,0 +1,185 @@
+Summary: Validating, recursive, and caching DNS(SEC) resolver
+Name: unbound
+Version: 1.0.2
+Release: 5%{?dist}
+License: BSD
+Url: http://www.nlnetlabs.nl/unbound/
+Source: http://www.unbound.net/downloads/%{name}-%{version}.tar.gz
+Source1: unbound.init
+Source2: unbound.conf
+Group: System Environment/Daemons
+BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+BuildRequires: flex, openssl-devel, ldns-devel >= 1.3.0, libevent-devel
+Requires(post): chkconfig
+Requires(preun): chkconfig
+Requires(preun): initscripts
+Requires(postun): initscripts
+Requires: ldns >= 1.3.0
+Requires(pre): shadow-utils
+# Is this obsolete?
+#Provides: caching-nameserver
+
+%description
+Unbound is a validating, recursive, and caching DNS(SEC) resolver.
+
+The C implementation of Unbound is developed and maintained by NLnet
+Labs. It is based on ideas and algorithms taken from a java prototype
+developed by Verisign labs, Nominet, Kirei and ep.net.
+
+Unbound is designed as a set of modular components, so that also
+DNSSEC (secure DNS) validation and stub-resolvers (that do not run
+as a server, but are linked into an application) are easily possible.
+
+%package devel
+Summary: Development package that includes the unbound header files
+Group: Development/Libraries
+Requires: %{name}-libs = %{version}-%{release}, openssl-devel, ldns-devel
+Requires: libevent-devel
+
+%description devel
+The devel package contains the unbound library and the include files
+
+%package libs
+Summary: Libraries used by the unbound server and client applications
+Group: Applications/System
+Requires(post): /sbin/ldconfig
+Requires(postun): /sbin/ldconfig
+
+%description libs
+Contains libraries used by the unbound server and client applications
+
+%prep
+%setup -q 
+
+%build
+%configure  --with-ldns= --with-libevent --with-pthreads --with-ssl \
+            --disable-rpath --enable-debug --disable-static \
+            --with-run-dir=%{_localstatedir}/lib/%{name}\
+            --with-conf-file=%{_localstatedir}/lib/%{name}/unbound.conf \
+            --with-pidfile=%{_localstatedir}/run/%{name}/%{name}.pid
+%{__make} CFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE" QUIET=no %{?_smp_mflags}
+
+%install
+rm -rf %{buildroot}
+%{__make} DESTDIR=%{buildroot} install
+install -d 0755 %{buildroot}%{_localstatedir}/lib/%{name}
+install -d 0755 %{buildroot}%{_initrddir}
+#install -m 0755 contrib/unbound.init %{buildroot}%{_initrddir}/unbound
+install -m 0755 %{SOURCE1} %{buildroot}%{_initrddir}/unbound
+#overwrite stock unbound.conf with our own
+install -m 0755 %{SOURCE2} %{buildroot}%{_localstatedir}/lib/%{name}
+
+# add symbolic link from /etc/unbound.conf -> /var/unbound/unbound.conf
+
+( cd %{buildroot}%{_sysconfdir}/ ; ln -s ..%{_localstatedir}/lib/unbound/unbound.conf )
+# remove static library from install (fedora packaging guidelines)
+rm -rf %{buildroot}%{_libdir}/*.la
+
+# The chroot needs /dev/log, /dev/random, /etc/resolv.conf and /etc/localtime
+# but the init script uses mount --bind, so just create empty files
+mkdir -p %{buildroot}%{_localstatedir}/lib/unbound/etc \
+         %{buildroot}%{_localstatedir}/lib/unbound/dev 
+echo "Used for mount --bind in initscript" >  %{buildroot}%{_localstatedir}/lib/unbound/etc/resolv.conf 
+echo "Used for mount --bind in initscript" > %{buildroot}%{_localstatedir}/lib/unbound/etc/localtime
+echo "Used for mount --bind in initscript" > %{buildroot}%{_localstatedir}/lib/unbound/dev/log 
+echo "Used for mount --bind in initscript" > %{buildroot}%{_localstatedir}/lib/unbound/dev/random
+mkdir -p %{buildroot}%{_localstatedir}/lib/unbound/var/run/unbound
+mkdir -p %{buildroot}%{_localstatedir}/run/unbound
+
+%clean
+rm -rf ${RPM_BUILD_ROOT}
+
+%files 
+%defattr(-,root,root,-)
+%doc doc/README doc/CREDITS doc/LICENSE doc/FEATURES
+%attr(0755,root,root) %{_initrddir}/%{name}
+# the chroot env
+%attr(0755,root,root) %dir %{_localstatedir}/lib/%{name}
+%attr(0755,unbound,unbound) %dir %{_localstatedir}/run/%{name}
+%attr(0755,root,root) %dir %{_localstatedir}/lib/%{name}/dev
+%attr(0755,root,root) %dir %{_localstatedir}/lib/%{name}/etc
+%attr(0755,root,root) %dir %{_localstatedir}/lib/%{name}/var
+%attr(0755,root,root) %dir %{_localstatedir}/lib/%{name}/var/run
+%attr(0755,root,root) %dir %{_localstatedir}/lib/%{name}/var/run/unbound
+%attr(0644,root,root) %config(noreplace) %{_sysconfdir}/unbound.conf
+%attr(0644,root,root) %config(noreplace) %{_localstatedir}/lib/%{name}/unbound.conf
+%attr(0644,root,root) %{_localstatedir}/lib/%{name}/dev/*
+%attr(0644,root,root) %{_localstatedir}/lib/%{name}/etc/*
+%{_sbindir}/*
+%{_mandir}/*/*
+
+%files devel
+%defattr(-,root,root,-)
+%{_libdir}/libunbound.so
+%{_includedir}/unbound.h
+%doc README
+
+%files libs
+%defattr(-,root,root,-)
+%{_libdir}/libunbound.so.*
+%doc doc/README doc/LICENSE
+
+%pre
+getent group unbound >/dev/null || groupadd -r unbound
+getent passwd unbound >/dev/null || \
+useradd -r -g unbound -d %{_localstatedir}/lib/%{name} -s /sbin/nologin \
+-c "Unbound DNS resolver" unbound
+exit 0
+
+%post 
+/sbin/chkconfig --add %{name}
+
+%post libs -p /sbin/ldconfig
+
+
+%preun
+if [ $1 -eq 0 ]; then
+        /sbin/service %{name} stop >/dev/null 2>&1
+        /sbin/chkconfig --del %{name} 
+fi
+
+%postun 
+if [ "$1" -ge "1" ]; then
+  /sbin/service %{name} condrestart >/dev/null 2>&1 || :
+fi
+
+%postun libs -p /sbin/ldconfig
+
+%changelog
+* Wed Oct 22 2008 Paul Wouters <paul@xelerance.com> - 1.0.2-5
+- Only call ldconfig in -libs package
+- Move configure into build section
+- devel subpackage should only depend on libs subpackage
+
+* Tue Oct 21 2008 Paul Wouters <paul@xelerance.com> - 1.0.2-4
+- Fix CFLAGS getting lost in build
+- Don't enable interface-automatic:yes because that
+  causes unbound to listen on 0.0.0.0 instead of 127.0.0.1
+
+* Sun Oct 19 2008 Paul Wouters <paul@xelerance.com> - 1.0.2-3
+- Split off unbound-libs, make build verbose 
+
+* Thu Oct  9 2008 Paul Wouters <paul@xelerance.com> - 1.0.2-2
+- FSB compliance, chroot fixes, initscript fixes
+
+* Thu Sep 11 2008 Paul Wouters <paul@xelerance.com> - 1.0.2-1
+- Upgraded to 1.0.2
+
+* Wed Jul 16 2008 Paul Wouters <paul@xelerance.com> - 1.0.1-1
+- upgraded to new release
+
+* Wed May 21 2008 Paul Wouters <paul@xelerance.com> - 1.0.0-2
+- Build against ldns-1.3.0
+
+* Wed May 21 2008 Paul Wouters <paul@xelerance.com> - 1.0.0-1
+- Split of -devel package, fixed dependancies, make rpmlint happy
+
+* Thu Apr 25 2008 Wouter Wijngaards <wouter@nlnetlabs.nl> - 0.12
+- Using parts from ports collection entry by Jaap Akkerhuis.
+- Using Fedoraproject wiki guidelines.
+
+* Wed Apr 23 2008 Wouter Wijngaards <wouter@nlnetlabs.nl> - 0.11
+- Initial version.
+
+
+