15 changed files with 461 additions and 497 deletions
--- a/.gitignore
+++ b/.gitignore
@ -1 +1,264 @@
+printconf-0.6.113.tar.bz2
+printconf-0.6.114.tar.bz2
+printconf-0.6.115.tar.bz2
+printconf-0.6.116.tar.bz2
+printconf-0.6.117.tar.bz2
+printconf-0.6.118.tar.bz2
+printconf-0.6.119.tar.bz2
+printconf-0.6.120.tar.bz2
+printconf-0.6.121.tar.bz2
+printconf-0.6.122.tar.bz2
+printconf-0.6.123.tar.bz2
+printconf-0.6.124.tar.bz2
+printconf-0.6.125.tar.bz2
+printconf-0.6.126.tar.bz2
+printconf-0.6.127.tar.bz2
+printconf-0.6.128.tar.bz2
+printconf-0.6.129.tar.bz2
+printconf-0.6.130.tar.bz2
+printconf-0.6.131.tar.bz2
+printconf-0.6.132.tar.bz2
+printconf-0.6.133.tar.bz2
+printconf-0.6.134.tar.bz2
+printconf-0.6.135.tar.bz2
+printconf-0.6.136.tar.bz2
+printconf-0.6.137.tar.bz2
+printconf-0.6.138.tar.bz2
+printconf-0.6.139.tar.bz2
+printconf-0.6.140.tar.bz2
+printconf-0.6.141.tar.bz2
+printconf-0.6.142.tar.bz2
+printconf-0.6.143.tar.bz2
+printconf-0.6.144.tar.bz2
+printconf-0.6.145.tar.bz2
+printconf-0.6.146.tar.bz2
+printconf-0.6.147.tar.bz2
+printconf-0.6.148.tar.bz2
+printconf-0.6.149.tar.bz2
+printconf-0.6.150.tar.bz2
+printconf-0.6.151.tar.bz2
+system-config-printer-0.7.4.tar.bz2
+pycups-1.9.7.tar.bz2
+pycups-1.9.8.tar.bz2
+system-config-printer-0.7.5.tar.bz2
+system-config-printer-0.7.6.tar.bz2
+pycups-1.9.9.tar.bz2
+system-config-printer-0.7.7.tar.bz2
+pycups-1.9.10.tar.bz2
+system-config-printer-0.7.8.tar.bz2
+pycups-1.9.11.tar.bz2
+system-config-printer-0.7.9.tar.bz2
+system-config-printer-0.7.10.tar.bz2
+system-config-printer-0.7.11.tar.bz2
+system-config-printer-0.7.12.tar.bz2
+system-config-printer-0.7.13.tar.bz2
+system-config-printer-0.7.14.tar.bz2
+system-config-printer-0.7.15.tar.bz2
+system-config-printer-0.7.16.tar.bz2
+system-config-printer-0.7.17.tar.bz2
+system-config-printer-0.7.18.tar.bz2
+system-config-printer-0.7.19.tar.bz2
+system-config-printer-0.7.20.tar.bz2
+pycups-1.9.12.tar.bz2
+system-config-printer-0.7.21.tar.bz2
+system-config-printer-0.7.22.tar.bz2
+system-config-printer-0.7.23.tar.bz2
+system-config-printer-0.7.24.tar.bz2
+system-config-printer-0.7.25.tar.bz2
+system-config-printer-0.7.26.tar.bz2
+system-config-printer-0.7.27.tar.bz2
+system-config-printer-0.7.28.tar.bz2
+system-config-printer-0.7.29.tar.bz2
+system-config-printer-0.7.30.tar.bz2
+system-config-printer-0.7.31.tar.bz2
+pycups-1.9.13.tar.bz2
+system-config-printer-0.7.32.tar.bz2
+pycups-1.9.14.tar.bz2
+system-config-printer-0.7.35.tar.bz2
+system-config-printer-0.7.36.tar.bz2
+system-config-printer-0.7.37.tar.bz2
+pycups-1.9.15.tar.bz2
+system-config-printer-0.7.38.tar.bz2
+system-config-printer-0.7.39.tar.bz2
+system-config-printer-0.7.40.tar.bz2
+pycups-1.9.16.tar.bz2
+system-config-printer-0.7.41.tar.bz2
+system-config-printer-0.7.42.tar.bz2
+system-config-printer-0.7.43.tar.bz2
+system-config-printer-0.7.44.tar.bz2
+system-config-printer-0.7.45.tar.bz2
+system-config-printer-0.7.46.tar.bz2
+system-config-printer-0.7.47.tar.bz2
+system-config-printer-0.7.49.tar.bz2
+system-config-printer-0.7.50.tar.bz2
+system-config-printer-0.7.51.tar.bz2
+system-config-printer-0.7.52.tar.bz2
+system-config-printer-0.7.53.tar.bz2
+system-config-printer-0.7.54.tar.bz2
+system-config-printer-0.7.55.tar.bz2
+system-config-printer-0.7.56.tar.bz2
+pycups-1.9.18.tar.bz2
+system-config-printer-0.7.57.tar.bz2
+system-config-printer-0.7.58.tar.bz2
+system-config-printer-0.7.59.tar.bz2
+pycups-1.9.19.tar.bz2
+system-config-printer-0.7.60.tar.bz2
+system-config-printer-0.7.61.tar.bz2
+system-config-printer-0.7.62.tar.bz2
+pycups-1.9.20.tar.bz2
+system-config-printer-0.7.63.tar.bz2
+system-config-printer-0.7.63.1.tar.bz2
+pycups-1.9.22.tar.bz2
+system-config-printer-0.7.65.tar.bz2
+system-config-printer-0.7.66.tar.bz2
+pycups-1.9.7.tar.bz2
+pycups-1.9.8.tar.bz2
+pycups-1.9.9.tar.bz2
+pycups-1.9.10.tar.bz2
+pycups-1.9.11.tar.bz2
+pycups-1.9.12.tar.bz2
+pycups-1.9.13.tar.bz2
+pycups-1.9.14.tar.bz2
+pycups-1.9.15.tar.bz2
+pycups-1.9.16.tar.bz2
+pycups-1.9.18.tar.bz2
+pycups-1.9.19.tar.bz2
+pycups-1.9.20.tar.bz2
+pycups-1.9.23.tar.bz2
+pycups-1.9.24.tar.bz2
+system-config-printer-0.7.67.tar.bz2
+system-config-printer-0.7.68.tar.bz2
+system-config-printer-0.7.69.tar.bz2
+system-config-printer-0.7.70.tar.bz2
+system-config-printer-0.7.71.tar.bz2
+system-config-printer-0.7.72.tar.bz2
+system-config-printer-0.7.73.tar.bz2
+pycups-1.9.25.tar.bz2
+system-config-printer-0.7.74.tar.bz2
+system-config-printer-0.7.74.1.tar.bz2
+pycups-1.9.26.tar.bz2
+pycups-1.9.27.tar.bz2
+system-config-printer-0.7.74.2.tar.bz2
+system-config-printer-0.7.74.3.tar.bz2
+system-config-printer-0.7.74.4.tar.bz2
+system-config-printer-0.7.75.tar.bz2
+system-config-printer-0.7.76.tar.bz2
+system-config-printer-0.7.77.tar.bz2
+pycups-1.9.29.tar.bz2
+pycups-1.9.30.tar.bz2
+pycups-1.9.31.tar.bz2
+system-config-printer-0.7.78.tar.bz2
+pycups-1.9.32.tar.bz2
+pycups-1.9.33.tar.bz2
+system-config-printer-0.7.79.tar.bz2
+pycups-1.9.34.tar.bz2
+system-config-printer-0.7.80.tar.bz2
+system-config-printer-0.7.81.tar.bz2
+pycups-1.9.35.tar.bz2
+system-config-printer-0.7.82.tar.bz2
+system-config-printer-0.7.82.1.tar.bz2
+pycups-1.9.36.tar.bz2
+pycups-1.9.37.tar.bz2
+system-config-printer-0.7.82.2.tar.bz2
+pycups-1.9.38.tar.bz2
+system-config-printer-0.9.90.tar.bz2
+pysmbc-1.0.0.tar.bz2
+system-config-printer-0.9.91.tar.bz2
+pysmbc-1.0.2.tar.bz2
+system-config-printer-0.9.92.tar.bz2
+system-config-printer-0.9.93.tar.bz2
+system-config-printer-1.0.0.tar.bz2
+pycups-1.9.39.tar.bz2
+pysmbc-1.0.3.tar.bz2
+system-config-printer-1.0.1.tar.bz2
+system-config-printer-1.0.2.tar.bz2
+pysmbc-1.0.4.tar.bz2
+pycups-1.9.40.tar.bz2
+system-config-printer-1.0.3.tar.bz2
+system-config-printer-1.0.4.tar.bz2
+pycups-1.9.41.tar.bz2
+system-config-printer-1.0.5.tar.bz2
+system-config-printer-1.0.6.tar.bz2
+pycups-1.9.42.tar.bz2
+pysmbc-1.0.5.tar.bz2
+system-config-printer-1.0.7.tar.bz2
+system-config-printer-1.0.8.tar.bz2
+pysmbc-1.0.6.tar.bz2
+system-config-printer-1.0.9.tar.bz2
+system-config-printer-1.0.10.tar.bz2
+system-config-printer-1.0.11.tar.bz2
+pycups-1.9.43.tar.bz2
+pycups-1.9.44.tar.bz2
+system-config-printer-1.0.12.tar.bz2
+system-config-printer-1.1.0.tar.bz2
+system-config-printer-1.1.1.tar.bz2
+pycups-1.9.45.tar.bz2
+system-config-printer-1.1.2.tar.bz2
+system-config-printer-1.1.3.tar.bz2
+system-config-printer-1.1.4.tar.bz2
+system-config-printer-1.1.5.tar.bz2
+system-config-printer-1.1.6.tar.bz2
+system-config-printer-1.1.7.tar.bz2
+pycups-1.9.46.tar.bz2
+system-config-printer-1.1.8.tar.bz2
+system-config-printer-1.1.10.tar.bz2
+system-config-printer-1.1.11.tar.xz
+system-config-printer-1.1.12.tar.xz
+system-config-printer-1.1.13.tar.xz
+system-config-printer-1.1.14.tar.xz
+system-config-printer-1.1.15.tar.xz
+pycups-1.9.47.tar.bz2
+system-config-printer-1.1.16.tar.xz
+pycups-1.9.48.tar.bz2
+system-config-printer-1.1.90.tar.xz
+system-config-printer-1.1.91.tar.xz
+system-config-printer-1.1.92.tar.xz
+system-config-printer-1.1.93.tar.xz
+system-config-printer-1.2.0.tar.xz
+pycups-1.9.49.tar.bz2
+system-config-printer-1.2.1.tar.xz
+system-config-printer-1.2.2.tar.xz
+pysmbc-1.0.7.tar.bz2
+pycups-1.9.50.tar.bz2
+system-config-printer-1.2.3.tar.xz
+pycups-1.9.51.tar.bz2
+/pysmbc-1.0.9.tar.bz2
+/system-config-printer-1.2.4.tar.xz
+/system-config-printer-1.2.5.tar.xz
+/system-config-printer-1.2.95.tar.xz
+/system-config-printer-1.2.96.tar.xz
+/system-config-printer-1.2.97.tar.xz
+/system-config-printer-1.3.0.tar.xz
+/system-config-printer-1.3.1.tar.xz
+/system-config-printer-1.3.2.tar.xz
+/system-config-printer-1.3.3.tar.xz
+/system-config-printer-1.3.4.tar.xz
+/system-config-printer-1.3.5.tar.xz
+/system-config-printer-1.3.6.tar.xz
+/system-config-printer-1.3.7.tar.xz
+/system-config-printer-1.3.8.tar.xz
+/system-config-printer-1.3.9.tar.xz
+/system-config-printer-1.3.10.tar.xz
+/system-config-printer-1.3.11.tar.xz
+/system-config-printer-1.3.12.tar.xz
+/system-config-printer-1.3.13.tar.xz
+/system-config-printer-1.4.0.tar.xz
+/system-config-printer-1.4.1.tar.xz
+/system-config-printer-1.4.2.tar.xz
+/system-config-printer-1.4.3.tar.xz
+/system-config-printer-1.4.4.tar.xz
+/system-config-printer-1.4.5.tar.xz
+/system-config-printer-1.4.6.tar.xz
+/system-config-printer-1.5.0.tar.xz
+/system-config-printer-1.5.1.tar.xz
+/system-config-printer-1.5.2.tar.xz
+/system-config-printer-1.5.3.tar.xz
+/system-config-printer-1.5.4.tar.xz
+/system-config-printer-1.5.5.tar.xz
+/system-config-printer-1.5.6.tar.xz
+/system-config-printer-1.5.7.tar.xz
+/system-config-printer-1.5.9.tar.gz
 /system-config-printer-1.5.11.tar.gz
+/system-config-printer-1.5.12.tar.gz
+/system-config-printer-1.5.13.tar.xz
+/system-config-printer-1.5.15.tar.xz
--- a/0001-Fallback-to-using-LC_CTYPE-if-LC_MESSAGES-is-empty-a.patch
+++ b/0001-Fallback-to-using-LC_CTYPE-if-LC_MESSAGES-is-empty-a.patch
@ -1,41 +0,0 @@
-From f52f192d241f49334aa46dca1fe9c22b2ee37ff3 Mon Sep 17 00:00:00 2001
-From: Antonio Larrosa <antonio.larrosa@gmail.com>
-Date: Thu, 31 May 2018 12:07:19 +0200
-Subject: [PATCH] Fallback to using LC_CTYPE if LC_MESSAGES is empty and fix
- _language use
-
-On openSUSE, LC_MESSAGES is not set by default, so fallback to LC_CTYPE in
-that case.
-
-Also, self._language is not a list (unlike in other classes) but the language
-itself, so if we get the first element, we would be getting the first letter,
-not the language.
---
- scp-dbus-service.py | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
-diff --git a/scp-dbus-service.py b/scp-dbus-service.py
-index 1338836b..b3c03217 100644
--- a/scp-dbus-service.py
-+++ b/scp-dbus-service.py
-@@ -471,6 +471,8 @@ class ConfigPrinting(dbus.service.Object):
-         self._jobappletpath = None
-         self._ppds = None
-         self._language = locale.getlocale (locale.LC_MESSAGES)[0]
-+        if not self._language:
-+            self._language = locale.getlocale (locale.LC_CTYPE)[0]
- 
-     def destroy (self):
-         self._cupsconn.destroy ()
-@@ -511,7 +513,7 @@ class ConfigPrinting(dbus.service.Object):
-     def GetBestDrivers(self, device_id, device_make_and_model, device_uri,
-                    reply_handler, error_handler):
-         GetBestDriversRequest (device_id, device_make_and_model, device_uri,
-                               self._cupsconn, self._language[0],
-+                               self._cupsconn, self._language,
-                                reply_handler, error_handler)
- 
-     @dbus.service.method(dbus_interface=CONFIG_IFACE,
-- 
-2.17.2
-
--- a/0001-Fix-TypeError-raised-by-debugprint-call.patch
+++ b/0001-Fix-TypeError-raised-by-debugprint-call.patch
@ -1,29 +0,0 @@
-From 4ab0958643827777f526b180ece874d40009986d Mon Sep 17 00:00:00 2001
-From: Tomas Korbar <tkorbar@redhat.com>
-Date: Thu, 27 Sep 2018 17:27:39 +0200
-Subject: [PATCH] Fix TypeError raised by debugprint call
-
- this error is caused by typo in options.py:424 debugprint call
- debugprint function takes only one parameter so i think it should
-have been formated string
- fix https://bugzilla.redhat.com/show_bug.cgi?id=1619593
---
- options.py | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/options.py b/options.py
-index 4dc0b1fe..d756f98d 100644
--- a/options.py
-+++ b/options.py
-@@ -421,7 +421,7 @@ class OptionSelectOne(Option):
-             self.selector.set_active(selected)
-         else:
-             debugprint("Unknown value for %s: %s" % (name, value))
-            debugprint("Choices:", supported)
-+            debugprint("Choices: %s" % (supported))
-             if len(supported) > 0:
-                 debugprint("Selecting from choices:", supported[0])
-                 self.selector.set_active(0)
-- 
-2.17.2
-
--- a/0001-Fix-typo-in-debugprint-call-https-github.com-zdohnal.patch
+++ b/0001-Fix-typo-in-debugprint-call-https-github.com-zdohnal.patch
@ -1,26 +0,0 @@
-From 027ed8683a0ec30dbe705fe4d8f31c8ccb973199 Mon Sep 17 00:00:00 2001
-From: Zdenek Dohnal <zdohnal@redhat.com>
-Date: Thu, 30 Aug 2018 12:05:53 +0200
-Subject: [PATCH] Fix typo in debugprint call
- (https://github.com/zdohnal/system-config-printer/issues/105)
-
---
- newprinter.py | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/newprinter.py b/newprinter.py
-index 850c986b..051fc253 100644
--- a/newprinter.py
-+++ b/newprinter.py
-@@ -1049,7 +1049,7 @@ class NewPrinterGUI(GtkGUI):
-             debugprint('No packages for driver')
-             return None
-         if len(arches) > 1:
-            debugprint('Returned more than one matching architecture, please report this as a bug: %s', repr (arches))
-+            debugprint('Returned more than one matching architecture, please report this as a bug: %s' % repr (arches))
-             return None
- 
-         pkgs = pkgs[arches[0]]
-- 
-2.17.2
-
--- a/0001-Require-proper-version-of-GDK-and-GTK-in-scp-dbus-se.patch
+++ b/0001-Require-proper-version-of-GDK-and-GTK-in-scp-dbus-se.patch
@ -1,35 +0,0 @@
-From 3fee7c63c3aba395a3d8cf0bf4ea0fd2fae695ae Mon Sep 17 00:00:00 2001
-From: Laurent Bigonville <bigon@bigon.be>
-Date: Mon, 26 Feb 2018 11:54:10 +0100
-Subject: [PATCH] Require proper version of GDK and GTK in scp-dbus-service as
- well
-
-scp-dbus-service can be D-Bus activated, that means that
-gi.require_version() is not called before.
-
-That needs to be kept in sync with the required version in the main
-program file.
---
- scp-dbus-service.py | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/scp-dbus-service.py b/scp-dbus-service.py
-index f0f51efc..3aefc6c6 100644
--- a/scp-dbus-service.py
-+++ b/scp-dbus-service.py
-@@ -21,9 +21,12 @@
- ## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- 
- import dbus.service
-+import gi
- from gi.repository import GObject
- from gi.repository import GLib
-+gi.require_version('Gdk', '3.0')
- from gi.repository import Gdk
-+gi.require_version('Gtk', '3.0')
- from gi.repository import Gtk
- import sys
- 
-- 
-2.17.2
-
--- a/0001-Set-programe-name-for-scp-dbus-service-as-well.patch
+++ b/0001-Set-programe-name-for-scp-dbus-service-as-well.patch
@ -1,41 +0,0 @@
-From d818802daefd66eafbcc1618dc731e65de3e08b8 Mon Sep 17 00:00:00 2001
-From: Laurent Bigonville <bigon@bigon.be>
-Date: Mon, 26 Feb 2018 13:59:26 +0100
-Subject: [PATCH] Set programe name for scp-dbus-service as well
-
-scp-dbus-service can be D-Bus activated, that means that the program
-name is never set meaning that the icon and the fancy name in the window
-list is never set.
-
-This completes the fix for bug #53
---
- scp-dbus-service.py | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
-diff --git a/scp-dbus-service.py b/scp-dbus-service.py
-index 3aefc6c6..1338836b 100644
--- a/scp-dbus-service.py
-+++ b/scp-dbus-service.py
-@@ -20,8 +20,8 @@
- ## along with this program; if not, write to the Free Software
- ## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301, USA.
- 
-import dbus.service
- import gi
-+import dbus.service
- from gi.repository import GObject
- from gi.repository import GLib
- gi.require_version('Gdk', '3.0')
-@@ -55,6 +55,9 @@ CONFIG_JOBVIEWER_IFACE=CONFIG_IFACE + ".JobViewer"
- g_ppds = None
- g_killtimer = None
- 
-+#set program name
-+GLib.set_prgname("system-config-printer")
-+
- class FetchedPPDs(GObject.GObject):
-     __gsignals__ = {
-         'ready': (GObject.SIGNAL_RUN_LAST, None, ()),
-- 
-2.17.2
-
--- a/0001-Use-ValueError-instead-of-ImportError-to-catch-excep.patch
+++ b/0001-Use-ValueError-instead-of-ImportError-to-catch-excep.patch
@ -1,32 +0,0 @@
-From 96e1f5b242f4be5b20d408e6f526caaaecf34a48 Mon Sep 17 00:00:00 2001
-From: Laurent Bigonville <bigon@bigon.be>
-Date: Mon, 26 Feb 2018 11:17:22 +0100
-Subject: [PATCH] Use ValueError instead of ImportError to catch exception when
- importing GIR bindings
-
-When importing specific version of GIR bindings, the ValueError
-exception is raised instead of ImportError.
-
-This should make libsecret optional as intended
-
-Fixes: #94
---
- jobviewer.py | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/jobviewer.py b/jobviewer.py
-index 6d9309ff..16b20300 100644
--- a/jobviewer.py
-+++ b/jobviewer.py
-@@ -57,7 +57,7 @@ try:
-     gi.require_version('Secret', '1')
-     from gi.repository import Secret
-     USE_SECRET=True
-except ImportError:
-+except ValueError:
-     USE_SECRET=False
- 
- import gettext
-- 
-2.17.2
-
--- a/0001-define-classes-for-Secret-only-when-libsecret-is-ins.patch
+++ b/0001-define-classes-for-Secret-only-when-libsecret-is-ins.patch
@ -1,148 +0,0 @@
-From 42d95b7560c26f0fdf3b4f46823843861948c136 Mon Sep 17 00:00:00 2001
-From: Zdenek Dohnal <zdohnal@redhat.com>
-Date: Thu, 30 Aug 2018 11:52:48 +0200
-Subject: [PATCH] define classes for Secret only when libsecret is installed
- (https://github.com/zdohnal/system-config-printer/issues/118,
- https://github.com/zdohnal/system-config-printer/issues/115)
-
---
- jobviewer.py | 123 ++++++++++++++++++++++++++-------------------------
- 1 file changed, 62 insertions(+), 61 deletions(-)
-
-diff --git a/jobviewer.py b/jobviewer.py
-index 16b20300..86f5feaf 100644
--- a/jobviewer.py
-+++ b/jobviewer.py
-@@ -73,67 +73,68 @@ SEARCHING_ICON="document-print-preview"
- # We need to call Notify.init before we can check the server for caps
- Notify.init('System Config Printer Notification')
- 
-NETWORK_PASSWORD = Secret.Schema.new("org.system.config.printer.store", Secret.SchemaFlags.NONE,
-                                     {
-                                         "user": Secret.SchemaAttributeType.STRING,
-                                         "domain": Secret.SchemaAttributeType.STRING,
-                                         "object": Secret.SchemaAttributeType.STRING,
-                                         "protocol": Secret.SchemaAttributeType.STRING,
-                                         "port": Secret.SchemaAttributeType.INTEGER,
-                                         "server": Secret.SchemaAttributeType.STRING,
-                                         "authtype": Secret.SchemaAttributeType.STRING,
-                                         "uri": Secret.SchemaAttributeType.STRING,
-                                     }
-                                     )
-
-
-class ServiceGet:
-    service = Secret.Service()
-
-    def on_get_service(self, source, result, unused):
-        service = Secret.Service.get_finish(result)
-
-    def __init__(self):
-        Secret.Service.get(0,
-                           None,
-                           self.on_get_service,
-                           None)
-
-    def get_service(self):
-        return ServiceGet.service
-
-
-class ItemSearch:
-    items = list()
-
-    def on_search_item(self, source, result, unused):
-        items = Secret.Service.search_finish(None, result)
-
-    def __init__(self, service, attrs):
-        Secret.Service.search(service,
-                              NETWORK_PASSWORD,
-                              attrs,
-                              Secret.SearchFlags.LOAD_SECRETS,
-                              None,
-                              self.on_search_item,
-                              None)
-
-    def get_items(self):
-        return ItemSearch.items
-
-
-class PasswordStore:
-    def __init__(self, attrs, name, secret):
-        Secret.password_store(NETWORK_PASSWORD,
-                              attrs,
-                              Secret.COLLECTION_DEFAULT,
-                              name,
-                              secret,
-                              None,
-                              self.on_password_stored)
-
-    def on_password_stored(self, source, result, unused):
-        Secret.password_store_finish(result)
-+if USE_SECRET:
-+    NETWORK_PASSWORD = Secret.Schema.new("org.system.config.printer.store", Secret.SchemaFlags.NONE,
-+                                         {
-+                                             "user": Secret.SchemaAttributeType.STRING,
-+                                             "domain": Secret.SchemaAttributeType.STRING,
-+                                             "object": Secret.SchemaAttributeType.STRING,
-+                                             "protocol": Secret.SchemaAttributeType.STRING,
-+                                             "port": Secret.SchemaAttributeType.INTEGER,
-+                                             "server": Secret.SchemaAttributeType.STRING,
-+                                             "authtype": Secret.SchemaAttributeType.STRING,
-+                                             "uri": Secret.SchemaAttributeType.STRING,
-+                                         }
-+                                         )
-+    
-+    
-+    class ServiceGet:
-+        service = Secret.Service()
-+    
-+        def on_get_service(self, source, result, unused):
-+            service = Secret.Service.get_finish(result)
-+    
-+        def __init__(self):
-+            Secret.Service.get(0,
-+                               None,
-+                               self.on_get_service,
-+                               None)
-+    
-+        def get_service(self):
-+            return ServiceGet.service
-+    
-+    
-+    class ItemSearch:
-+        items = list()
-+    
-+        def on_search_item(self, source, result, unused):
-+            items = Secret.Service.search_finish(None, result)
-+    
-+        def __init__(self, service, attrs):
-+            Secret.Service.search(service,
-+                                  NETWORK_PASSWORD,
-+                                  attrs,
-+                                  Secret.SearchFlags.LOAD_SECRETS,
-+                                  None,
-+                                  self.on_search_item,
-+                                  None)
-+    
-+        def get_items(self):
-+            return ItemSearch.items
-+    
-+    
-+    class PasswordStore:
-+        def __init__(self, attrs, name, secret):
-+            Secret.password_store(NETWORK_PASSWORD,
-+                                  attrs,
-+                                  Secret.COLLECTION_DEFAULT,
-+                                  name,
-+                                  secret,
-+                                  None,
-+                                  self.on_password_stored)
-+    
-+        def on_password_stored(self, source, result, unused):
-+            Secret.password_store_finish(result)
- 
- 
- class PrinterURIIndex:
-- 
-2.17.2
-
--- a/0001-encoding-Modified-to-use-utf-8-in-fdopen.patch
+++ b/0001-encoding-Modified-to-use-utf-8-in-fdopen.patch
@ -1,66 +0,0 @@
-From e7940de50a7164a2de82e003222ecbf8b10c9ad5 Mon Sep 17 00:00:00 2001
-From: xoduddk123 <xoduddk123@naver.com>
-Date: Wed, 20 Jun 2018 12:24:13 +0900
-Subject: [PATCH] encoding: Modified to use utf-8 in fdopen()
-
-The following error occurred due to encoding problem in fdopen().
-
-root@tykwon:~# cat /var/log/syslog
-2018-02-12T17:08:24.208317+09:00 tykwon kernel: usb 1-1.2: new high-speed USB device number 4 using dwc_otg
-2018-02-12T17:08:24.309341+09:00 tykwon kernel: usb 1-1.2: New USB device found, idVendor=03f0, idProduct=3b2a
-2018-02-12T17:08:24.309398+09:00 tykwon kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
-2018-02-12T17:08:24.309415+09:00 tykwon kernel: usb 1-1.2: Product: HP Color LaserJet MFP M277n
-2018-02-12T17:08:24.309428+09:00 tykwon kernel: usb 1-1.2: Manufacturer: Hewlett-Packard
-2018-02-12T17:08:24.318314+09:00 tykwon kernel: usb 1-1.2: SerialNumber: VNBKK97643
-2018-02-12T17:08:24.340967+09:00 tykwon root: loading HP Device 001 004
-2018-02-12T17:08:25.537224+09:00 tykwon python: io/hpmud/musb.c 2185: [307] hpmud_make_usb_uri() bus=001 dev=004
-2018-02-12T17:08:25.540188+09:00 tykwon python: io/hpmud/musb.c 2282: hpmud_make_usb_uri() uri=hp:/usb/HP_Color_LaserJet_MFP_M277n?serial=VNBKK97643 bytes_read=53
-2018-02-12T17:08:26.510021+09:00 tykwon kernel: usblp 1-1.2:1.1: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3B2A
-2018-02-12T17:08:26.518337+09:00 tykwon kernel: usbcore: registered new interface driver usblp
-2018-02-12T17:08:26.523457+09:00 tykwon systemd[1]: Created slice system-configure\x2dprinter.slice.
-2018-02-12T17:08:26.525835+09:00 tykwon systemd[1]: Started Configure Plugged-In Printer.
-2018-02-12T17:08:26.527132+09:00 tykwon systemd[1]: Reached target Printer.
-2018-02-12T17:08:26.546282+09:00 tykwon udev-configure-printer: add usb-001-004
-2018-02-12T17:08:26.688365+09:00 tykwon udev-configure-printer: device devpath is /devices/lm1/usb1/1-1/1-1.2
-2018-02-12T17:08:26.700706+09:00 tykwon udev-configure-printer: MFG:Hewlett-Packard MDL:HP Color LaserJet MFP M277n SERN:- serial:VNBKK97643
-2018-02-12T17:08:31.788344+09:00 tykwon kernel: usblp0: removed
-2018-02-12T17:08:31.798343+09:00 tykwon kernel: usblp 1-1.2:1.1: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3B2A
-2018-02-12T17:08:31.870363+09:00 tykwon udev-configure-printer: URI contains USB serial number
-2018-02-12T17:08:31.871482+09:00 tykwon udev-configure-printer: URI match: usb://HP/Color%20LaserJet%20MFP%20M277n?serial=VNBKK97643&interface=1
-2018-02-12T17:08:31.872536+09:00 tykwon udev-configure-printer: SERN field matches USB serial number
-2018-02-12T17:08:31.873629+09:00 tykwon udev-configure-printer: URI match: hp:/usb/HP_Color_LaserJet_MFP_M277n?serial=VNBKK97643
-2018-02-12T17:08:31.874594+09:00 tykwon udev-configure-printer: URI of detected printer: usb://HP/Color%20LaserJet%20MFP%20M277n?serial=VNBKK97643&interface=1, normalized: color laserjet mfp m277n serial vnbkk97643 interface 1
-2018-02-12T17:08:31.875782+09:00 tykwon udev-configure-printer: URI of print queue: hp:/usb/HP_LaserJet_Professional_P1106?serial=000000000QN926Y1PR1a, normalized: laserjet professional p1106 serial 000000000qn926y1pr1a
-2018-02-12T17:08:31.876985+09:00 tykwon udev-configure-printer: URI of detected printer: hp:/usb/HP_Color_LaserJet_MFP_M277n?serial=VNBKK97643, normalized: color laserjet mfp m277n serial vnbkk97643
-2018-02-12T17:08:31.878166+09:00 tykwon udev-configure-printer: About to add queue for hp:/usb/HP_Color_LaserJet_MFP_M277n?serial=VNBKK97643
-2018-02-12T17:08:34.760340+09:00 tykwon udev-add-printer: add_queue: URIs=['hp:/usb/HP_Color_LaserJet_MFP_M277n?serial=VNBKK97643', 'usb://HP/Color%20LaserJet%20MFP%20M277n?serial=VNBKK97643&interface=1']
-2018-02-12T17:08:34.766174+09:00 tykwon udev-add-printer: D-Bus method call failed: org.freedesktop.DBus.Error.ServiceUnknown: The name com.redhat.NewPrinterNotification was not provided by any .service files
-2018-02-12T17:08:41.722389+09:00 tykwon udev-add-printer: PPD: hplip:1/hp-color_laserjet_pro_mfp_m277-ps.ppd; Status: 0
-2018-02-12T17:08:45.763635+09:00 tykwon udev-add-printer: File "/lib/udev/udev-add-printer", line 232, in <module>#012    add_queue (sys.argv[1], sys.argv[2:])
-2018-02-12T17:08:45.764840+09:00 tykwon udev-add-printer: File "/lib/udev/udev-add-printer", line 169, in add_queue#012    installer)
-2018-02-12T17:08:45.765979+09:00 tykwon udev-add-printer: File "/lib/udev/udev-add-printer", line 75, in create_queue#012    (pkgs, exes) = cupshelpers.missingPackagesAndExecutables (ppd)
-2018-02-12T17:08:45.767236+09:00 tykwon udev-add-printer: File "/usr/lib/python3.5/site-packages/cupshelpers/cupshelpers.py", line 889, in missingPackagesAndExecutables#012    executables = missingExecutables(ppd)
-2018-02-12T17:08:45.768527+09:00 tykwon udev-add-printer: File "/usr/lib/python3.5/site-packages/cupshelpers/cupshelpers.py", line 864, in missingExecutables#012    for line in f:
-2018-02-12T17:08:45.769834+09:00 tykwon udev-add-printer: File "/usr/lib/python3.5/encodings/ascii.py", line 26, in decode#012    return codecs.ascii_decode(input, self.errors)[0]
-2018-02-12T17:08:45.771056+09:00 tykwon udev-add-printer: UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 in position 4175: ordinal not in range(128)
-root@tykwon:~#
---
- cupshelpers/cupshelpers.py | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/cupshelpers/cupshelpers.py b/cupshelpers/cupshelpers.py
-index 978ab801..8fe7ead4 100755
--- a/cupshelpers/cupshelpers.py
-+++ b/cupshelpers/cupshelpers.py
-@@ -859,7 +859,7 @@ def missingExecutables(ppd):
-         os.unlink (tmpfname)
-         ppd.writeFd (tmpfd)
-         os.lseek (tmpfd, 0, os.SEEK_SET)
-        f = os.fdopen (tmpfd, "rt")
-+        f = os.fdopen (tmpfd, "rt", encoding="utf-8")
-         search = "*cupsFilter:"
-         for line in f:
-             if line.startswith (search):
-- 
-2.17.2
-
--- a/0001-require-Gtk-and-Gdk-version-3.0-in-asyncpk1.py.patch
+++ b/0001-require-Gtk-and-Gdk-version-3.0-in-asyncpk1.py.patch
@ -1,26 +0,0 @@
-From 8a623c2f038dd85da3df647531c6a881d235523c Mon Sep 17 00:00:00 2001
-From: Zdenek Dohnal <zdohnal@redhat.com>
-Date: Fri, 23 Mar 2018 13:43:41 +0100
-Subject: [PATCH] require Gtk and Gdk version 3.0 in asyncpk1.py
-
---
- asyncpk1.py | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/asyncpk1.py b/asyncpk1.py
-index 65d2e768..849c995f 100644
--- a/asyncpk1.py
-+++ b/asyncpk1.py
-@@ -22,7 +22,9 @@ import cups
- import dbus
- from functools import reduce
- try:
-+    gi.require_version('Gdk', '3.0')
-     from gi.repository import Gdk
-+    gi.require_version('Gtk', '3.0')
-     from gi.repository import Gtk
- except:
-     pass
-- 
-2.17.2
-
--- a/gating.yaml
+++ b/gating.yaml
@ -1,7 +1,8 @@
 --- !Policy
 product_versions:
-    - rhel-8
+    - rhel-9
 decision_context: osci_compose_gate
 rules:
    - !PassingTestCaseRule {test_case_name: baseos-ci.brew-build.tier1.functional}
    - !PassingTestCaseRule {test_case_name: baseos-ci.brew-build.tedude.validation}
+    - !PassingTestCaseRule {test_case_name: baseos-ci.brew-build.acceptance-tier.functional}
--- a/2
+++ b/2
@ -1 +1 @@
-SHA512 (system-config-printer-1.5.11.tar.gz) = d7aed7eab7807ee16b1a8f82290923ba90b711d9e5b58be10568980301fc6bb55d4b18f3049b612fb9fffcde08273dbb1f2c34a34c50e6e66e9f8fab79fc81c2
+SHA512 (system-config-printer-1.5.15.tar.xz) = b992f96f48c54350c11c5c629e77ee4409fe52fb17b386f226a42d532a95e17b6506319dcedeb70c0072555cb9ab464daaae22f295ce3d5181e5f49836f2ae2e
--- a/system-config-printer-authdialog.patch
+++ b/system-config-printer-authdialog.patch
@ -1,15 +0,0 @@
-diff -up system-config-printer-1.5.11/authconn.py.authdialog system-config-printer-1.5.11/authconn.py
--- system-config-printer-1.5.11/authconn.py.authdialog	2018-02-15 11:42:35.074157581 +0100
-+++ system-config-printer-1.5.11/authconn.py	2018-02-15 11:43:51.652437359 +0100
-@@ -78,11 +78,9 @@ class AuthDialog(Gtk.Dialog):
-             field = auth_info_required[i]
-             label = Gtk.Label (label=_(self.AUTH_FIELD.get (field, field)))
-             label.set_alignment (0, 0.5)
-            grid.attach (label, 0, 1, i, i + 1)
-             grid.attach (label, 0, i, 1, 1)
-             entry = Gtk.Entry ()
-             entry.set_visibility (field != 'password')
-            grid.attach (entry, 1, 2, i, i + 1, 0, 0)
-             grid.attach (entry, 1, i, 1, 1)
-             self.field_entry.append (entry)
- 
--- a/system-config-printer.spec
+++ b/system-config-printer.spec
@ -4,31 +4,26 @@
 # Enable hardened build, as the udev part runs with privilege.
 %global _hardened_build 1

-%global username zdohnal
+%global username OpenPrinting

 Summary: A printer administration tool
 Name: system-config-printer
-Version: 1.5.11
-Release: 13%{?dist}
+Version: 1.5.15
+Release: 4%{?dist}
 License: GPLv2+
 URL: https://github.com/%{username}/%{name}
-Source0: %{url}/releases/download/%{version}/%{name}-%{version}.tar.gz
+Source0: %{url}/releases/download/%{version}/%{name}-%{version}.tar.xz

 # all upstream patches, remove with new release
-Patch01: system-config-printer-authdialog.patch
-Patch02: 0001-Use-ValueError-instead-of-ImportError-to-catch-excep.patch
-Patch03: 0001-Require-proper-version-of-GDK-and-GTK-in-scp-dbus-se.patch
-Patch04: 0001-Set-programe-name-for-scp-dbus-service-as-well.patch
-Patch05: 0001-require-Gtk-and-Gdk-version-3.0-in-asyncpk1.py.patch
-Patch06: 0001-encoding-Modified-to-use-utf-8-in-fdopen.patch
-Patch07: 0001-Fallback-to-using-LC_CTYPE-if-LC_MESSAGES-is-empty-a.patch
-Patch08: 0001-define-classes-for-Secret-only-when-libsecret-is-ins.patch
-Patch09: 0001-Fix-typo-in-debugprint-call-https-github.com-zdohnal.patch
-Patch10: 0001-Fix-TypeError-raised-by-debugprint-call.patch
+

 # gcc is no longer in buildroot by default
 # gcc is needed for udev-configure-printer.c
 BuildRequires: gcc
+# for autosetup
+BuildRequires: git-core
+# uses make
+BuildRequires: make

 BuildRequires: cups-devel >= 1.2
 BuildRequires: desktop-file-utils >= 0.2.92
@ -52,7 +47,6 @@ Requires: libnotify%{?_isa}
 Requires: python3-cairo%{?_isa}
 Requires: python3-firewall
 Requires: libcanberra-gtk3
-Requires: PackageKit-gtk3-module
 %{?systemd_requires}

 %description
@ -61,6 +55,7 @@ the user to configure a CUPS print server.

 %package libs
 Summary: Libraries and shared code for printer administration tool
+Requires: libnotify
 Requires: python3-cups >= 1.9.60
 Requires: python3-pycurl
 Requires: gobject-introspection
@ -70,60 +65,83 @@ Requires: python3-dbus
 Requires: python3-requests
 Suggests: python3-smbc
 BuildArch: noarch
-Obsoletes: %{name}-libs < 1.3.12-10

 %description libs
 The common code used by both the graphical and non-graphical parts of
 the configuration tool.

+%if 0%{?rhel} <= 8 || 0%{?fedora}
 %package applet
 Summary: Print job notification applet
 Requires: %{name}-libs

 %description applet
 Print job notification applet.
+%endif

 %package udev
 Summary: Rules for udev for automatic configuration of USB printers
 Requires: system-config-printer-libs = %{version}-%{release}
-Obsoletes: hal-cups-utils < 0.6.20
-Provides: hal-cups-utils = 0.6.20

 %description udev
 The udev rules and helper programs for automatically configuring USB
 printers.

 %prep
-%setup -q
-%patch01 -p1 -b .authdialog
-%patch02 -p1 -b .upstream0
-%patch03 -p1 -b .upstream1
-%patch04 -p1 -b .upstream2
-%patch05 -p1 -b .upstream3
-%patch06 -p1 -b .upstream4
-%patch07 -p1 -b .upstream5
-%patch08 -p1 -b .upstream6
-%patch09 -p1 -b .upstream7
-%patch10 -p1 -b .upstream8
+%autosetup -S git

 %build
 %configure --with-udev-rules
-make %{?_smp_mflags}
+%make_build

 %install
-make DESTDIR=%buildroot install
+%make_install

 %{__mkdir_p} %buildroot%{_localstatedir}/run/udev-configure-printer
 touch %buildroot%{_localstatedir}/run/udev-configure-printer/usb-uris

 # Manually invoke the python byte compile macro for each path that
 # needs byte compilation
-%py_byte_compile %{__python3} %%{buildroot}%{python3_sitelib}/cupshelpers
-%py_byte_compile %{__python3} %%{buildroot}%{datadir}/system-config-printer
+%py_byte_compile %{__python3} %{buildroot}/%{_datadir}/system-config-printer

 %find_lang system-config-printer

+%if 0%{?rhel} > 8
+rm -rf %{buildroot}%{_bindir}/%{name}-applet \
+       %{buildroot}%{_datadir}/%{name}/__pycache__/applet* \
+       %{buildroot}%{_datadir}/%{name}/applet.py* \
+       %{buildroot}%{_sysconfdir}/xdg/autostart/print-applet.desktop \
+       %{buildroot}%{_mandir}/man1/%{name}-applet.1* \
+       %{buildroot}%{_bindir}/%{name} \
+       %{buildroot}%{_bindir}/install-printerdriver \
+       %{buildroot}%{_datadir}/%{name}/__pycache__/check-device-ids* \
+       %{buildroot}%{_datadir}/%{name}/__pycache__/HIG* \
+       %{buildroot}%{_datadir}/%{name}/__pycache__/SearchCriterion* \
+       %{buildroot}%{_datadir}/%{name}/__pycache__/serversettings* \
+       %{buildroot}%{_datadir}/%{name}/__pycache__/system-config-printer* \
+       %{buildroot}%{_datadir}/%{name}/__pycache__/ToolbarSearchEntry* \
+       %{buildroot}%{_datadir}/%{name}/__pycache__/userdefault* \
+       %{buildroot}%{_datadir}/%{name}/__pycache__/install-printerdriver* \
+       %{buildroot}%{_datadir}/%{name}/check-device-ids.py* \
+       %{buildroot}%{_datadir}/%{name}/HIG.py* \
+       %{buildroot}%{_datadir}/%{name}/SearchCriterion.py* \
+       %{buildroot}%{_datadir}/%{name}/serversettings.py* \
+       %{buildroot}%{_datadir}/%{name}/system-config-printer.py* \
+       %{buildroot}%{_datadir}/%{name}/ToolbarSearchEntry.py* \
+       %{buildroot}%{_datadir}/%{name}/userdefault.py* \
+       %{buildroot}%{_datadir}/%{name}/troubleshoot \
+       %{buildroot}%{_datadir}/%{name}/icons \
+       %{buildroot}%{_datadir}/%{name}/install-printerdriver.py* \
+       %{buildroot}%{_datadir}/%{name}/xml/__pycache__ \
+       %{buildroot}%{_datadir}/%{name}/xml/validate.py* \
+       %{buildroot}%{_datadir}/%{name}/ui \
+       %{buildroot}%{_datadir}/applications/system-config-printer.desktop \
+       %{buildroot}%{_datadir}/metainfo/%{name}.appdata.xml \
+       %{buildroot}%{_mandir}/man1/%{name}.1* \
+%endif
+
 %files libs -f system-config-printer.lang
+%doc ChangeLog NEWS ABOUT-NLS AUTHORS ChangeLog-OLD
 %license COPYING
 %config(noreplace) %{_sysconfdir}/dbus-1/system.d/com.redhat.NewPrinterNotification.conf
 %config(noreplace) %{_sysconfdir}/dbus-1/system.d/com.redhat.PrinterDriversInstaller.conf
@ -131,6 +149,16 @@ touch %buildroot%{_localstatedir}/run/udev-configure-printer/usb-uris
 %{_datadir}/dbus-1/services/*.service
 %{_bindir}/scp-dbus-service
 %dir %{_datadir}/%{name}
+%{_datadir}/%{name}/__pycache__/*
+%exclude %{_datadir}/%{name}/__pycache__/check-device-ids*
+%exclude %{_datadir}/%{name}/__pycache__/HIG*
+%exclude %{_datadir}/%{name}/__pycache__/SearchCriterion*
+%exclude %{_datadir}/%{name}/__pycache__/serversettings*
+%exclude %{_datadir}/%{name}/__pycache__/system-config-printer*
+%exclude %{_datadir}/%{name}/__pycache__/ToolbarSearchEntry*
+%exclude %{_datadir}/%{name}/__pycache__/userdefault*
+%exclude %{_datadir}/%{name}/__pycache__/install-printerdriver*
+%exclude %{_datadir}/%{name}/__pycache__/applet*
 %{_datadir}/%{name}/asyncconn.py*
 %{_datadir}/%{name}/asyncipp.py*
 %{_datadir}/%{name}/asyncpk1.py*
@ -162,16 +190,22 @@ touch %buildroot%{_localstatedir}/run/udev-configure-printer/usb-uris
 %{_datadir}/%{name}/smburi.py*
 %{_datadir}/%{name}/statereason.py*
 %{_datadir}/%{name}/timedops.py*
+%dir %{_datadir}/%{name}/__pycache__
+%dir %{_datadir}/%{name}/xml
+%{_datadir}/%{name}/xml/*.rng
 %dir %{_sysconfdir}/cupshelpers
 %config(noreplace) %{_sysconfdir}/cupshelpers/preferreddrivers.xml
 %{python3_sitelib}/cupshelpers
 %{python3_sitelib}/*.egg-info

+%if 0%{?rhel} <= 8 || 0%{?fedora}
 %files applet
 %{_bindir}/%{name}-applet
+%{_datadir}/%{name}/__pycache__/applet*
 %{_datadir}/%{name}/applet.py*
 %{_sysconfdir}/xdg/autostart/print-applet.desktop
 %{_mandir}/man1/%{name}-applet.1*
+%endif

 %files udev
 %{_prefix}/lib/udev/rules.d/*.rules
@ -180,11 +214,20 @@ touch %buildroot%{_localstatedir}/run/udev-configure-printer/usb-uris
 %ghost %verify(not md5 size mtime) %config(noreplace,missingok) %attr(0644,root,root) %{_localstatedir}/run/udev-configure-printer/usb-uris
 %{_unitdir}/configure-printer@.service

+%if 0%{?rhel} <= 8 || 0%{?fedora}
 %files
 %doc ChangeLog NEWS ABOUT-NLS AUTHORS ChangeLog-OLD
 %license COPYING
 %{_bindir}/%{name}
 %{_bindir}/install-printerdriver
+%{_datadir}/%{name}/__pycache__/check-device-ids*
+%{_datadir}/%{name}/__pycache__/HIG*
+%{_datadir}/%{name}/__pycache__/SearchCriterion*
+%{_datadir}/%{name}/__pycache__/serversettings*
+%{_datadir}/%{name}/__pycache__/system-config-printer*
+%{_datadir}/%{name}/__pycache__/ToolbarSearchEntry*
+%{_datadir}/%{name}/__pycache__/userdefault*
+%{_datadir}/%{name}/__pycache__/install-printerdriver*
 %{_datadir}/%{name}/check-device-ids.py*
 %{_datadir}/%{name}/HIG.py*
 %{_datadir}/%{name}/SearchCriterion.py*
@ -195,8 +238,8 @@ touch %buildroot%{_localstatedir}/run/udev-configure-printer/usb-uris
 %{_datadir}/%{name}/troubleshoot
 %{_datadir}/%{name}/icons
 %{_datadir}/%{name}/install-printerdriver.py*
-%dir %{_datadir}/%{name}/xml
-%{_datadir}/%{name}/xml/*.rng
+%dir %{_datadir}/%{name}/xml/__pycache__
+%{_datadir}/%{name}/xml/__pycache__/*
 %{_datadir}/%{name}/xml/validate.py*
 %dir %{_datadir}/%{name}/ui
 %{_datadir}/%{name}/ui/*.ui
@ -205,10 +248,85 @@ touch %buildroot%{_localstatedir}/run/udev-configure-printer/usb-uris
 %{_mandir}/man1/%{name}.1*

 %post
-/bin/rm -f /var/cache/foomatic/foomatic.pickle
+%{_bindir}/rm -f /var/cache/foomatic/foomatic.pickle
 exit 0
+%endif

 %changelog
+* Tue Aug 10 2021 Mohan Boddu <mboddu@redhat.com> - 1.5.15-4
+- Rebuilt for IMA sigs, glibc 2.34, aarch64 flags
+  Related: rhbz#1991688
+
+* Fri Apr 16 2021 Mohan Boddu <mboddu@redhat.com> - 1.5.15-3
+- Rebuilt for RHEL 9 BETA on Apr 15th 2021. Related: rhbz#1947937
+
+* Wed Jan 27 2021 Fedora Release Engineering <releng@fedoraproject.org> - 1.5.15-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
+
+* Thu Jan 14 2021 Zdenek Dohnal <zdohnal@redhat.com> - 1.5.15-1
+- 1.5.15, apply eln changes
+
+* Tue Jan 05 2021 Zdenek Dohnal <zdohnal@redhat.com> - 1.5.13-3
+- 1750156 - hangs on selection of change PPD (Make and Model)
+
+* Fri Nov 27 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.5.13-2
+- set preferred driver for Dymo LabelWriter 400
+
+* Thu Nov 05 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.5.13-1
+- 1.15.13
+
+* Mon Oct 05 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.5.12-9
+- 1884866 - s-c-p: isAlive() is removed, use is_alive()
+
+* Wed Jul 29 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.5.12-8
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
+
+* Wed Jul 22 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.5.12-7
+- python3.9 - xml module removed elem.getchildren() method, use list(elem)
+
+* Tue Jul 14 2020 Tom Stellard <tstellar@redhat.com> - 1.5.12-6
+- Use make macros
+- https://fedoraproject.org/wiki/Changes/UseMakeBuildInstallMacro
+
+* Tue May 26 2020 Miro Hrončok <mhroncok@redhat.com> - 1.5.12-5
+- Rebuilt for Python 3.9
+
+* Fri Jan 31 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.5.12-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
+
+* Thu Oct 31 2019 Zdenek Dohnal <zdohnal@redhat.com> - 1.5.12-3
+- whole fix for #1765915
+
+* Tue Oct 29 2019 Zdenek Dohnal <zdohnal@redhat.com> - 1.5.12-2
+- 1765915 - abrt in udev-configure-printer
+
+* Tue Oct 01 2019 Zdenek Dohnal <zdohnal@redhat.com> - 1.5.12-1
+- 1.5.12
+
+* Tue Aug 27 2019 Zdenek Dohnal <zdohnal@redhat.com> - 1.5.11-21
+- require libnotify - there can be cases where it is not brought by any other packages
+
+* Mon Aug 19 2019 Miro Hrončok <mhroncok@redhat.com> - 1.5.11-20
+- Rebuilt for Python 3.8
+
+* Sat Jul 27 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1.5.11-19
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
+
+* Mon Jul 15 2019 Zdenek Dohnal <zdohnal@redhat.com> - 1.5.11-18
+- 1729453 - system-config-printer does not ship byte-compiled Python files
+
+* Wed May 29 2019 Zdenek Dohnal <zdohnal@redhat.com> - 1.5.11-17
+- upstream was moved to OpenPrinting
+
+* Sun Feb 03 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1.5.11-16
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
+
+* Wed Jan 02 2019 Zdenek Dohnal <zdohnal@redhat.com> - 1.5.11-15
+- remove packagekit-gtk3-module dependency
+
+* Fri Nov 09 2018 Zdenek Dohnal <zdohnal@redhat.com> - 1.5.11-14
+- deprecate at_console statement
+
 * Mon Oct 15 2018 Zdenek Dohnal <zdohnal@redhat.com> - 1.5.11-13
 - backport several upstream patches

--- a/upstream-key.gpg
+++ b/upstream-key.gpg
@ -0,0 +1,41 @@
+-----BEGIN PGP PUBLIC KEY BLOCK-----
+Version: GnuPG v1.4.11 (GNU/Linux)
+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+=uNLi
+-----END PGP PUBLIC KEY BLOCK-----