.gitignore

@@ -1 +1 @@
-/synce4l-1.1.0.tar.gz
+SOURCES/synce4l-9564b5.tar.gz

.synce4l.metadata

@@ -0,0 +1 @@
+0ac4868f7b3121b7f8cb58ef5560c4b807a36edd SOURCES/synce4l-9564b5.tar.gz

README.md

@@ -1,3 +0,0 @@
-# synce4l
-
-The synce4l package

SOURCES/synce4l.conf

@@ -0,0 +1,27 @@
+[global]
+logging_level              6
+use_syslog                 1
+verbose                    0
+message_tag                [synce4l]
+
+[<synce1>]
+input_mode                 line
+network_option             1
+external_input_QL          11
+external_input_ext_QL      33
+extended_tlv               1
+recover_time               20
+eec_get_state_cmd          cat /sys/class/net/eth0/device/cgu_state
+eec_holdover_value         4
+eec_locked_ho_value        3
+eec_locked_value           2
+eec_freerun_value          1
+eec_invalid_value          0
+
+[eth0]
+tx_heartbeat_msec          1000
+rx_heartbeat_msec          500
+recover_clock_enable_cmd   echo 1 0 > /sys/class/net/eth0/device/phy/synce
+recover_clock_disable_cmd  echo 0 0 > /sys/class/net/eth0/device/phy/synce
+allowed_qls                3,4,7
+allowed_ext_qls            20,21

SPECS/synce4l.spec

@@ -0,0 +1,78 @@
+%global gitver 9564b5589d72ed3571a1f2130204aea60683bd78
+%global gitrel %(c=%{gitver}; echo ${c:0:6})
+%global gitdate 20221122
+
+Name:		synce4l
+Version:	0
+Release:	4.%{gitdate}git%{gitrel}%{?dist}
+Summary:	SyncE implementation for Linux
+
+License:	GPL-2.0-or-later
+URL:		https://github.com/intel/synce4l
+Source0:	https://github.com/intel/synce4l/archive/%{gitrel}/synce4l-%{gitrel}.tar.gz
+Source1:	synce4l.service
+Source2:	synce4l.conf
+
+BuildRequires:	gcc make systemd
+
+%{?systemd_requires}
+
+%description
+synce4l is a software implementation of Synchronous Ethernet (SyncE) according
+to ITU-T Recommendation G.8264. The design goal is to provide logic to
+supported hardware by processing Ethernet Synchronization Messaging Channel
+(ESMC) and control Ethernet Equipment Clock (EEC) on Network Card Interface
+(NIC).
+
+%prep
+%setup -q -n synce4l-%{gitver}
+
+%build
+%{make_build} \
+	EXTRA_CFLAGS="$RPM_OPT_FLAGS" \
+	EXTRA_LDFLAGS="$RPM_LD_FLAGS"
+
+%install
+# make_install doesn't work here
+%makeinstall
+
+mkdir -p $RPM_BUILD_ROOT{%{_sysconfdir},%{_unitdir},%{_mandir}/man5}
+install -m 644 -p %{SOURCE1} $RPM_BUILD_ROOT%{_unitdir}
+install -m 644 -p %{SOURCE2} $RPM_BUILD_ROOT%{_sysconfdir}
+
+echo '.so man8/synce4l.8' > $RPM_BUILD_ROOT%{_mandir}/man5/synce4l.conf.5
+
+%check
+./synce4l -h 2>&1 | grep 'usage:.*synce4l'
+
+%post
+%systemd_post synce4l.service
+
+%preun
+%systemd_preun synce4l.service
+
+%postun
+%systemd_postun_with_restart synce4l.service
+
+%files
+%license COPYING
+%doc README.md
+%config(noreplace) %{_sysconfdir}/synce4l.conf
+%{_unitdir}/synce4l.service
+%{_sbindir}/synce4l
+%{_mandir}/man5/*.5*
+%{_mandir}/man8/*.8*
+
+%changelog
+* Tue Jan 03 2023 Miroslav Lichvar <mlichvar@redhat.com> 0-4.20221122git9564b5
+- update to 20221122git9564b5 (#2019751)
+
+* Wed Nov 16 2022 Miroslav Lichvar <mlichvar@redhat.com> 0-3.20221114gitca51d5
+- update to 20221114gitca51d5 (#2141038)
+
+* Thu Nov 10 2022 Miroslav Lichvar <mlichvar@redhat.com> 0-2.20221108git079577
+- fix compiler warning (#2141038)
+- add simple test (#2141038)
+
+* Tue Nov 08 2022 Miroslav Lichvar <mlichvar@redhat.com> 0-1.20221108git079577
+- make initial release

gating.yaml

@@ -1,6 +0,0 @@
---- !Policy
-product_versions:
-    - rhel-10
-decision_context: osci_compose_gate
-rules:
-    - !PassingTestCaseRule {test_case_name: osci.brew-build.tier0.functional}

sources

@@ -1 +0,0 @@
-SHA512 (synce4l-1.1.0.tar.gz) = d13418f9d229d3b335cf60f4f7a00bb21850d17c3d4f6486e0e13ce7ce6e2435f697b08e69a33980561d34d403148fb40e648eceb2c0b56a5841366d200fd650

synce4l-ccwarns.patch

@@ -1,90 +0,0 @@
-commit b8089eabc28d665cba462c29aabdb159f0f153a6
-Author: Miroslav Lichvar <mlichvar@redhat.com>
-Date:   Tue May 28 13:38:13 2024 +0200
-
-    Fix more compiler warnings
-    
-    Fix the following warnings observed when -O2 and -D_FORTIFY_SOURCE=2 are
-    added to CFLAGS.
-    
-    synce_dev.c: In function ‘rebuild_inputs_prio’:
-    synce_dev.c:610:28: warning: ‘best_c_idx’ may be used uninitialized [-Wmaybe-uninitialized]
-      610 |                         all[best_c_idx] = NULL;
-          |                            ^
-    synce_dev.c:582:39: note: ‘best_c_idx’ was declared here
-      582 |         int i = 0, prio_count = 0, j, best_c_idx, ret;
-          |                                       ^~~~~~~~~~
-    
-    synce_manager.c: In function ‘synce_manager_server_thread’:
-    synce_manager.c:260:9: warning: ‘strncpy’ specified bound 108 equals destination size [-Wstringop-truncation]
-      260 |         strncpy(server.sun_path, synce_clock_get_socket_path(clk),
-          |         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-      261 |                 sizeof(server.sun_path));
-          |                 ~~~~~~~~~~~~~~~~~~~~~~~~
-    
-    synce_manager.c:343:20: warning: ‘ret’ may be used uninitialized [-Wmaybe-uninitialized]
-      343 |                 if (!ret)
-          |                    ^
-    synce_manager.c:241:26: note: ‘ret’ was declared here
-      241 |         int tlv_num = 0, ret, i, resp_len, bytes_read;
-          |                          ^~~
-    
-    synce_manager.c: In function ‘synce_manager_server_thread’:
-    synce_manager.c:346:25: warning: ignoring return value of ‘write’ declared with attribute ‘warn_unused_result’ [-Wunused-result]
-      346 |                         write(new_socket, response, resp_len);
-          |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-    
-    Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
-
-diff --git a/synce_dev.c b/synce_dev.c
-index fc784ed..5e2bbb9 100644
---- a/synce_dev.c
-+++ b/synce_dev.c
-@@ -579,7 +579,7 @@ static bool source_invalid(struct synce_clock_source *c)
- int rebuild_inputs_prio(struct synce_dev *dev)
- {
- 	struct synce_clock_source *c, *best_c, **all, **prioritized;
--	int i = 0, prio_count = 0, j, best_c_idx, ret;
-+	int i = 0, prio_count = 0, j, best_c_idx = 0, ret;
- 	uint32_t prio;
- 
- 	all = calloc(dev->num_clock_sources, sizeof(*all));
-diff --git a/synce_manager.c b/synce_manager.c
-index b9ba08d..598ef7e 100644
---- a/synce_manager.c
-+++ b/synce_manager.c
-@@ -257,8 +257,8 @@ static void *synce_manager_server_thread(void *arg)
- 	}
- 
- 	server.sun_family = AF_UNIX;
--	strncpy(server.sun_path, synce_clock_get_socket_path(clk),
--		sizeof(server.sun_path));
-+	snprintf(server.sun_path, sizeof(server.sun_path), "%s",
-+		 synce_clock_get_socket_path(clk));
- 
- 	if (bind(server_fd, (struct sockaddr *)&server, sizeof(server)) < 0) {
- 		pr_err("%s Bind failed", __func__);
-@@ -289,10 +289,12 @@ static void *synce_manager_server_thread(void *arg)
- 		bytes_read = recv(new_socket, command, MAX_COMMAND_SIZE, 0);
- 		if (bytes_read <= 0) {
- 			synce_manager_generate_err_tlv(&err_tlv, "NULL command");
-+			ret = -1;
- 			goto return_response;
- 		} else if (bytes_read > MAX_COMMAND_SIZE) {
- 			synce_manager_generate_err_tlv(&err_tlv,
- 						       "Command size exceeds MAX_COMMAND_SIZE");
-+			ret = -1;
- 			goto return_response;
- 		}
- 		ret = synce_manager_parse_input(command, bytes_read, &tlv_array,
-@@ -340,8 +342,8 @@ return_response:
- 		if (tlv_array)
- 			free((void *)tlv_array);
- 
--		if (!ret)
--			write(new_socket, response, resp_len);
-+		if (!ret && write(new_socket, response, resp_len) != resp_len)
-+			ret = -1;
- 		close(new_socket);
- 	}
- 

synce4l-initpinid.patch

@@ -1,24 +0,0 @@
-commit b61dd54c1015692785a1766b15f7f5914f68df70
-Author: Miroslav Lichvar <mlichvar@redhat.com>
-Date:   Wed Aug 7 14:14:32 2024 +0200
-
-    Initialize pin ID to -1
-    
-    When creating the pin structure, initialize the pin ID to -1 to avoid
-    matching an existing pin with ID 0 (e.g. CVL-SDP22 on E810) when a
-    nonexistent pin is specified in the config.
-    
-    Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
-
-diff --git a/dpll_mon.c b/dpll_mon.c
-index 39659fe..36aa559 100644
---- a/dpll_mon.c
-+++ b/dpll_mon.c
-@@ -240,6 +240,7 @@ static struct dpll_mon_pin *pin_create(void)
- 	}
- 	pr_debug("%s %p", __func__, pin);
- 	pin->parent_used_by = PARENT_NOT_USED;
-+	pin->id = -1;
- 	STAILQ_INIT(&pin->parents);
- 
- 	return pin;

synce4l-noduppin.patch

@@ -1,43 +0,0 @@
-commit 11319e050cde0657395d2656e2be4a629b53fb3b
-Author: Miroslav Lichvar <mlichvar@redhat.com>
-Date:   Mon Aug 5 16:20:49 2024 +0200
-
-    Fix crash in dpll_rt_recv()
-    
-    A crash was observed with E810 firmware 4.50 and kernel 6.11-rc1 in
-    dpll_rt_recv() trying to assign pin id to the pin which was removed by
-    remove_no_ifname_pin(). The pin is not a duplicate.
-    
-    Add a third parameter to remove_no_ifname_pin() to avoid removing the
-    incorrect pin.
-    
-    Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
-
-diff --git a/dpll_mon.c b/dpll_mon.c
-index 06b4bce..39659fe 100644
---- a/dpll_mon.c
-+++ b/dpll_mon.c
-@@ -256,12 +256,12 @@ static void pin_destroy(struct dpll_mon_pin *pin)
- 	free(pin);
- }
- 
--void remove_no_ifname_pin(struct dpll_mon *dm, uint32_t pin_id)
-+void remove_no_ifname_pin(struct dpll_mon *dm, uint32_t pin_id, struct dpll_mon_pin *except)
- {
- 	struct dpll_mon_pin *pin;
- 
- 	STAILQ_FOREACH(pin, &dm->pins, list)
--		if (pin && pin_id == pin->id && pin->ifname == NULL) {
-+		if (pin && pin != except && pin_id == pin->id && pin->ifname == NULL) {
- 			pr_debug_pin("removed duplicated pin", pin);
- 			STAILQ_REMOVE(&dm->pins, pin, dpll_mon_pin, list);
- 			pin_destroy(pin);
-@@ -589,7 +589,7 @@ static int dpll_rt_recv(struct nl_msg *msg, void *arg)
- 		goto unlock;
- 	pin_id = nla_get_u32(an[DPLL_A_PIN_ID]);
- 	if (pin) {
--		remove_no_ifname_pin(dm, pin_id);
-+		remove_no_ifname_pin(dm, pin_id, pin);
- 		pin->id = pin_id;
- 		pr_debug_pin("pin assigned id", pin);
- 	} else {

synce4l-smc.patch

@@ -1,133 +0,0 @@
-commit 6edb7f5a974c8a80f68c7b82b1bde1c1b37b75bb
-Author: Miroslav Lichvar <mlichvar@redhat.com>
-Date:   Wed Jun 5 12:55:29 2024 +0200
-
-    Change default smc_socket_path to /run/synce4l_socket
-    
-    System services should use /run for sockets and other runtime files.
-    
-    Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
-
-diff --git a/README.md b/README.md
-index 87623a9..c1c1d73 100644
---- a/README.md
-+++ b/README.md
-@@ -125,7 +125,7 @@ related to a running synce4l instance.
- | `logging_level`      | `6`                   | `0-7`        | Minimum log level required to appear in a log.                  |
- | `message_tag`        | None                  | string       | Tag reported in a log.                                          |
- | `poll_interval_msec` | 20                    | 0-500        | Sleep time between subsequent SyncE clock polls                 |
--| `smc_socket_path`    | `/tmp/synce4l_socket` | string       | Full path to socket file for external application communication |
-+| `smc_socket_path`    | `/run/synce4l_socket` | string       | Full path to socket file for external application communication |
- | `use_syslog`         | `1`                   | `0`, `1`     | Set to 1 if `syslog` should be used.                            |
- | `verbose`            | `0`                   | `0`, `1`     | Set to 1 to log extra information.                              |
- 
-@@ -200,7 +200,7 @@ logging_level              7
- use_syslog                 0
- verbose                    1
- message_tag                [synce4l]
--smc_socket_path            /tmp/synce4l_socket
-+smc_socket_path            /run/synce4l_socket
- 
- [<synce1>]
- network_option             1
-@@ -239,7 +239,7 @@ logging_level              7
- use_syslog                 0
- verbose                    1
- message_tag                [synce4l]
--smc_socket_path            /tmp/synce4l_socket
-+smc_socket_path            /run/synce4l_socket
- 
- [<synce1>]
- network_option             1
-diff --git a/config.c b/config.c
-index bb438a6..274c2d3 100644
---- a/config.c
-+++ b/config.c
-@@ -180,7 +180,7 @@ struct config_item config_tab_synce[] = {
- 	GLOB_ITEM_STR("message_tag", NULL),
- 	GLOB_ITEM_INT("poll_interval_msec", 20, CLOCK_POLL_INTERVAL_MIN,
- 		      CLOCK_POLL_INTERVAL_MAX),
--	GLOB_ITEM_STR("smc_socket_path", "/tmp/synce4l_socket"),
-+	GLOB_ITEM_STR("smc_socket_path", "/run/synce4l_socket"),
- 	GLOB_ITEM_INT("use_syslog", 1, 0, 1),
- 	GLOB_ITEM_STR("userDescription", ""),
- 	GLOB_ITEM_INT("verbose", 0, 0, 1),
-diff --git a/configs/synce4l.cfg b/configs/synce4l.cfg
-index ca12e9f..de92bd1 100644
---- a/configs/synce4l.cfg
-+++ b/configs/synce4l.cfg
-@@ -7,7 +7,7 @@ logging_level		7
- use_syslog		0
- verbose			1
- message_tag		[synce4l]
--smc_socket_path		/tmp/synce4l_socket
-+smc_socket_path		/run/synce4l_socket
- 
- 
- #
-diff --git a/configs/synce4l_dpll.cfg b/configs/synce4l_dpll.cfg
-index b814266..db4bd88 100644
---- a/configs/synce4l_dpll.cfg
-+++ b/configs/synce4l_dpll.cfg
-@@ -7,7 +7,7 @@ logging_level		6
- use_syslog		0
- verbose			1
- message_tag		[synce4l]
--smc_socket_path		/tmp/synce4l_socket
-+smc_socket_path		/run/synce4l_socket
- 
- 
- #
-
-commit 2f50c7a8b98d99220108abb0163696dcfed77635
-Author: Miroslav Lichvar <mlichvar@redhat.com>
-Date:   Wed Jun 5 13:05:18 2024 +0200
-
-    Check smc_socket_path length
-    
-    Exit with an error message if the configured socket path is too long to
-    be bound as a Unix domain socket.
-    
-    Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
-
-diff --git a/synce_manager.c b/synce_manager.c
-index 598ef7e..a42b823 100644
---- a/synce_manager.c
-+++ b/synce_manager.c
-@@ -256,6 +256,10 @@ static void *synce_manager_server_thread(void *arg)
- 		exit(EXIT_FAILURE);
- 	}
- 
-+	if (strlen(synce_clock_get_socket_path(clk)) >= sizeof(server.sun_path)) {
-+		pr_err("%s smc_socket_path is too long", __func__);
-+		exit(EXIT_FAILURE);
-+	}
- 	server.sun_family = AF_UNIX;
- 	snprintf(server.sun_path, sizeof(server.sun_path), "%s",
- 		 synce_clock_get_socket_path(clk));
-
-commit b5a9ad4f0aa1fb98e4ac060c91a08d82fe66e7d2
-Author: Miroslav Lichvar <mlichvar@redhat.com>
-Date:   Wed Jun 5 13:07:04 2024 +0200
-
-    Unlink smc_socket_path before binding
-    
-    Remove the Unix domain socket if it already exists (e.g. previous
-    synce4l instance didn't exit cleanly) to avoid failing in the bind()
-    call.
-    
-    Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
-
-diff --git a/synce_manager.c b/synce_manager.c
-index a42b823..6baf18c 100644
---- a/synce_manager.c
-+++ b/synce_manager.c
-@@ -264,6 +264,8 @@ static void *synce_manager_server_thread(void *arg)
- 	snprintf(server.sun_path, sizeof(server.sun_path), "%s",
- 		 synce_clock_get_socket_path(clk));
- 
-+	unlink(server.sun_path);
-+
- 	if (bind(server_fd, (struct sockaddr *)&server, sizeof(server)) < 0) {
- 		pr_err("%s Bind failed", __func__);
- 		exit(EXIT_FAILURE);

synce4l-stacksize.patch

@@ -1,26 +0,0 @@
-commit f134a38219fc390405f488d5eaaa64e7957b29f3
-Author: Miroslav Lichvar <mlichvar@redhat.com>
-Date:   Tue Aug 13 12:19:24 2024 +0200
-
-    Fix requested thread stack size
-    
-    The pthread_attr_setstacksize() call requesting size of 0xffff fails on
-    systems with 64k pages. Request the maximum of 0xffff and
-    PTHREAD_STACK_MIN instead.
-    
-    Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
-
-diff --git a/synce_thread_common.h b/synce_thread_common.h
-index cf607ac..8db11d7 100644
---- a/synce_thread_common.h
-+++ b/synce_thread_common.h
-@@ -13,7 +13,8 @@
- #define MSEC_TO_USEC(X)			(X * 1000)
- #define THREAD_STOP_SLEEP_USEC		MSEC_TO_USEC(50)
- #define THREAD_START_SLEEP_USEC		MSEC_TO_USEC(20)
--#define SYNCE_THREAD_STACK_SIZE		0xffff
-+#define SYNCE_THREAD_STACK_SIZE		(0xffff > PTHREAD_STACK_MIN ? \
-+					 0xffff : PTHREAD_STACK_MIN)
- #define TASK_COMM_LEN			16
- 
- #endif /* HAVE_SYNCE_THREAD_COMMON_H */

synce4l.spec

@@ -1,127 +0,0 @@
-Name:		synce4l
-Version:	1.1.0
-Release:	5%{?dist}
-Summary:	SyncE implementation for Linux
-
-License:	GPL-2.0-or-later
-URL:		https://github.com/intel/synce4l
-Source0:	https://github.com/intel/synce4l/archive/%{version}/synce4l-%{version}.tar.gz
-Source1:	synce4l.service
-
-# Fix compiler warnings to avoid build failures with -Werror
-Patch1:		synce4l-ccwarns.patch
-# Change default smc socket path and remove existing socket on start
-Patch2:		synce4l-smc.patch
-# Fix crash observed with newer E810 firmware
-Patch3:		synce4l-noduppin.patch
-# Fix initial pin ID to not match an existing pin
-Patch4:		synce4l-initpinid.patch
-# Fix requested thread stack size on aarch64
-Patch5:		synce4l-stacksize.patch
-
-BuildRequires:	gcc make systemd
-BuildRequires:	libnl3-devel
-
-%{?systemd_requires}
-
-%description
-synce4l is a software implementation of Synchronous Ethernet (SyncE) according
-to ITU-T Recommendation G.8264. The design goal is to provide logic to
-supported hardware by processing Ethernet Synchronization Messaging Channel
-(ESMC) and control Ethernet Equipment Clock (EEC) on Network Card Interface
-(NIC).
-
-%prep
-%autosetup -p1
-
-sed \
-	-e 's|^\(logging_level	*\)[0-7]|\16|' \
-	-e 's|^\(use_syslog	*\)[01]|\11|' \
-	-e 's|^\(verbose	*\)[01]|\10|' \
-	< configs/synce4l_dpll.cfg > synce4l.conf
-touch -r configs/synce4l_dpll.cfg synce4l.conf
-
-%build
-%{make_build} \
-	EXTRA_CFLAGS="$RPM_OPT_FLAGS" \
-	EXTRA_LDFLAGS="$RPM_LD_FLAGS"
-
-%install
-# make_install doesn't work here
-%makeinstall
-
-mkdir -p $RPM_BUILD_ROOT{%{_sysconfdir},%{_unitdir},%{_mandir}/man5}
-install -m 644 -p %{SOURCE1} $RPM_BUILD_ROOT%{_unitdir}
-install -m 644 -p synce4l.conf $RPM_BUILD_ROOT%{_sysconfdir}
-
-echo '.so man8/synce4l.8' > $RPM_BUILD_ROOT%{_mandir}/man5/synce4l.conf.5
-
-%check
-./synce4l -h 2>&1 | grep 'usage:.*synce4l'
-
-%post
-%systemd_post synce4l.service
-
-%preun
-%systemd_preun synce4l.service
-
-%postun
-%systemd_postun_with_restart synce4l.service
-
-%files
-%license COPYING
-%doc README.md
-%config(noreplace) %{_sysconfdir}/synce4l.conf
-%{_unitdir}/synce4l.service
-%{_sbindir}/synce4l
-%{_mandir}/man5/*.5*
-%{_mandir}/man8/*.8*
-
-%changelog
-* Tue Oct 29 2024 Troy Dawson <tdawson@redhat.com> - 1.1.0-5
-- Bump release for October 2024 mass rebuild:
-  Resolves: RHEL-64018
-
-* Tue Aug 20 2024 Miroslav Lichvar <mlichvar@redhat.com> 1.1.0-4
-- remove existing smc socket on start (RHEL-40673)
-- fix crash observed with newer E810 firmware (RHEL-55261)
-- fix initial pin ID to not match an existing pin (RHEL-55261)
-- fix requested thread stack size on aarch64 (RHEL-55260)
-
-* Mon Jun 24 2024 Troy Dawson <tdawson@redhat.com> - 1.1.0-3
-- Bump release for June 2024 mass rebuild
-
-* Wed Jun 05 2024 Miroslav Lichvar <mlichvar@redhat.com> 1.1.0-2
-- move smc_socket_path in default config to /run
-
-* Tue Jun 04 2024 Miroslav Lichvar <mlichvar@redhat.com> 1.1.0-1
-- update to 1.1.0 (RHEL-39976, RHEL-39467, RHEL-39465, RHEL-39463, RHEL-39454)
-
-* Sat Jan 27 2024 Fedora Release Engineering <releng@fedoraproject.org> - 1.0.0-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_40_Mass_Rebuild
-
-* Mon Nov 06 2023 Miroslav Lichvar <mlichvar@redhat.com> 1.0.0-1
-- update to 1.0.0
-- switch default config to use kernel DPLL API
-
-* Sat Jul 22 2023 Fedora Release Engineering <releng@fedoraproject.org> - 0.9.1-2
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_39_Mass_Rebuild
-
-* Mon Jul 10 2023 Miroslav Lichvar <mlichvar@redhat.com> 0.9.1-1
-- update to 0.9.1
-
-* Mon Jun 19 2023 Miroslav Lichvar <mlichvar@redhat.com> 0.9.0-1
-- update to 0.9.0
-
-* Sat Jan 21 2023 Fedora Release Engineering <releng@fedoraproject.org> - 0-4.20221114gitca51d5
-- Rebuilt for https://fedoraproject.org/wiki/Fedora_38_Mass_Rebuild
-
-* Wed Nov 16 2022 Miroslav Lichvar <mlichvar@redhat.com> 0-3.20221114gitca51d5
-- update to 20221114gitca51d5 (#2141038)
-
-* Thu Nov 10 2022 Miroslav Lichvar <mlichvar@redhat.com> 0-2.20221108git079577
-- fix compiler warning (#2141038)
-- add simple test (#2141038)
-
-* Tue Nov 08 2022 Miroslav Lichvar <mlichvar@redhat.com> 0-1.20221108git079577
-- make initial release

tests/defconfig/runtest.sh

@@ -1,33 +0,0 @@
-#!/bin/bash
-# Test if synce4l can parse default configuration
-
-set -ex
-
-# Find a nonexistent network device
-i=1
-while ip link show eth$i &> /dev/null; do
-	i=$((i + 1))
-done
-eth=eth$i
-
-tmpconf=$(mktemp)
-
-sed \
-	-e "s/^\[ens.*\]/\[eth$i\]/" \
-	-e "s|/run/synce4l_socket|/doesnotexist/synce4l_socket|" \
-	< /etc/synce4l.conf > "$tmpconf"
-
-out=$(timeout -s 9 5 synce4l -m -q -l 7 -f "$tmpconf" 2>&1 || :)
-
-echo "$out" | grep -q "created num_devices:"
-echo "$out" | grep -q "synce_manager_server_thread Bind failed"
-
-echo "unknownoption 1" >> "$tmpconf"
-
-out=$(timeout -s 9 5 synce4l -m -q -l 7 -f "$tmpconf" 2>&1 || :)
-
-echo "$out" | grep -q "failed to parse configuration file"
-
-rm "$tmpconf"
-
-exit 0

tests/tests.yml

@@ -1,9 +0,0 @@
-- hosts: localhost
-  roles:
-  - role: standard-test-basic
-    tags:
-    - classic
-    tests:
-    - defconfig
-    required_packages:
-    - iproute