Summary: Tools for monitoring SMART capable hard disks Name: smartmontools Version: 6.6 Release: 3%{?dist} Epoch: 1 Group: System Environment/Base License: GPLv2+ URL: http://smartmontools.sourceforge.net/ Source0: http://downloads.sourceforge.net/%{name}/%{name}-%{version}.tar.gz Source2: smartmontools.sysconf Source4: smartdnotify #semi-automatic update of drivedb.h %global UrlSource5 https://sourceforge.net/p/smartmontools/code/HEAD/tree/trunk/smartmontools/drivedb.h?format=raw Source5: drivedb.h #fedora/rhel specific Patch1: smartmontools-5.38-defaultconf.patch BuildRoot: %(mktemp -ud %{_tmppath}/%{name}-%{version}-%{release}-XXXXXX) #new rpm does not handle this (yet?) #Requires(triggerun): systemd-units Requires(post): systemd-units Requires(preun): systemd-units Requires(postun): systemd-units BuildRequires: readline-devel ncurses-devel automake util-linux groff gettext BuildRequires: libselinux-devel libcap-ng-devel BuildRequires: systemd-units %description The smartmontools package contains two utility programs (smartctl and smartd) to control and monitor storage systems using the Self- Monitoring, Analysis and Reporting Technology System (SMART) built into most modern ATA and SCSI hard disks. In many cases, these utilities will provide advanced warning of disk degradation and failure. %prep %setup -q %patch1 -p1 -b .defaultconf # update SOURCE5 on maintainer's machine prior commiting, there's no internet connection on builders curl %{UrlSource5} -o %{SOURCE5} ||: cp %{SOURCE5} . %build autoreconf -i %configure --with-selinux --with-libcap-ng=yes --with-systemdsystemunitdir=%{_unitdir} --sysconfdir=%{_sysconfdir}/%name/ %ifarch sparc64 make CXXFLAGS="$RPM_OPT_FLAGS -fPIE" LDFLAGS="-pie -Wl,-z,relro,-z,now" %else make CXXFLAGS="$RPM_OPT_FLAGS -fpie" LDFLAGS="-pie -Wl,-z,relro,-z,now" %endif sed -i 's|/etc/smartmontools/sysconfig|/etc/sysconfig|g' smartd.service %install rm -rf $RPM_BUILD_ROOT make DESTDIR=$RPM_BUILD_ROOT install rm -f examplescripts/Makefile* chmod a-x -R examplescripts/* install -D -p -m 644 %{SOURCE2} $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/smartmontools install -D -p -m 755 %{SOURCE4} $RPM_BUILD_ROOT/%{_libexecdir}/%{name}/smartdnotify mkdir -p $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/smartd_warning.d rm -rf $RPM_BUILD_ROOT/etc/{rc.d,init.d} rm -rf $RPM_BUILD_ROOT/%{_docdir}/%{name} mkdir -p $RPM_BUILD_ROOT/%{_sharedstatedir}/%{name} %clean rm -rf $RPM_BUILD_ROOT %preun %systemd_preun smartd.service %pre if [ $1 = 2 ] # only during update then # for Fedora 19-22 if [ -f %{_sysconfdir}/smartd.conf -a ! -e %{_sysconfdir}/%name ] then mkdir -p %{_sysconfdir}/%{name} cp -p %{_sysconfdir}/smartd.conf %{_sysconfdir}/%{name} fi fi %post %systemd_post smartd.service %postun %systemd_postun_with_restart smartd.service %files %defattr(-,root,root,-) %doc AUTHORS ChangeLog COPYING INSTALL NEWS README %doc TODO examplescripts smartd.conf %dir %{_sysconfdir}/%name %dir %{_sysconfdir}/%name/smartd_warning.d %config(noreplace) %{_sysconfdir}/%{name}/smartd.conf %config(noreplace) %{_sysconfdir}/%{name}/smartd_warning.sh %config(noreplace) %{_sysconfdir}/sysconfig/smartmontools %{_unitdir}/smartd.service %{_sbindir}/smartd %{_sbindir}/update-smart-drivedb %{_sbindir}/smartctl %{_mandir}/man?/smart*.* %{_mandir}/man?/update-smart*.* %{_libexecdir}/%{name} %{_datadir}/%{name} %{_sharedstatedir}/%{name} %changelog * Fri Feb 09 2018 Fedora Release Engineering - 1:6.6-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild * Tue Nov 07 2017 Igor Gnatenko - 1:6.6-2 - Remove old crufty coreutils requires * Mon Nov 06 2017 Michal Hlavinka - 1:6.6-1 - smartmontools updated to 6.6 * Thu Aug 03 2017 Fedora Release Engineering - 1:6.5-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Binutils_Mass_Rebuild * Thu Jul 27 2017 Fedora Release Engineering - 1:6.5-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_27_Mass_Rebuild * Sat Feb 11 2017 Fedora Release Engineering - 1:6.5-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild * Fri Nov 11 2016 Michal Hlavinka - 1:6.5-2 - enable location for persistence data(#1291928) * Mon May 09 2016 Michal Hlavinka - 1:6.5-1 - smartmontools updated to 6.5 * Fri Feb 05 2016 Fedora Release Engineering - 1:6.4-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_24_Mass_Rebuild * Tue Jun 23 2015 Michal Hlavinka - 1:6.4-3 - it is no longer necessary to do utf-8 conversion of the AUTHORS and ChangeLog (#1228825) * Fri Jun 19 2015 Fedora Release Engineering - 1:6.4-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_23_Mass_Rebuild * Fri Jun 05 2015 Michal Hlavinka - 1:6.4-1 - smartmontools updated to 6.4 * Sat May 02 2015 Kalev Lember - 1:6.3-4 - Rebuilt for GCC 5 C++11 ABI change * Wed Jan 14 2015 Michal Hlavinka - 1:6.3-3 - do not require sendmail * Mon Aug 18 2014 Fedora Release Engineering - 1:6.3-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_22_Mass_Rebuild * Mon Aug 04 2014 Michal Hlavinka - 1:6.3-1 - smartmontools updated to 6.3 * Thu Jul 17 2014 Michal Hlavinka - 1:6.2-7 - update drivedb database (#954162) * Sun Jun 08 2014 Fedora Release Engineering - 1:6.2-6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_21_Mass_Rebuild * Thu Apr 17 2014 Michal Hlavinka - 1:6.2-5 - require /usr/sbin/sendmail as MTA is not provided by all packages (#1048618) * Tue Apr 15 2014 Michal Hlavinka - 1:6.2-4 - use MTA instead of sendmail as a requirement (#1048614) * Thu Apr 10 2014 Michal Hlavinka - 1:6.2-3 - add mail requires (#1048614) * Mon Sep 16 2013 Michal Hlavinka - 1:6.2-2 - smartd service file wrong path to environment file (#998225) * Tue Jul 30 2013 Michal Hlavinka - 1:6.2-1 - smartmontools updated to 6.2 * Mon Jul 22 2013 Michal Hlavinka - 1:6.1-2 - spec cleanup * Wed Mar 20 2013 Michal Hlavinka - 1:6.1-1 - smartmontools updated to 6.1 * Fri Feb 15 2013 Fedora Release Engineering - 1:6.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild * Thu Oct 11 2012 Michal Hlavinka - 1:6.0-1 - smartmontools updated to 6.0 * Tue Aug 21 2012 Michal Hlavinka - 1:5.43-3 - use new systemd rpm macros (#850316) * Sat Jul 21 2012 Fedora Release Engineering - 1:5.43-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild * Mon Jul 02 2012 Michal Hlavinka - 1:5.43-1 - smartmontools updated to 5.43 * Sat Jan 14 2012 Fedora Release Engineering - 1:5.42-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild * Fri Dec 02 2011 Michal Hlavinka - 1:5.42-2 - enable smartd after installation * Fri Oct 21 2011 Michal Hlavinka - 1:5.42-1 - smartmontools updated to 5.42 * Mon Jun 13 2011 Michal Hlavinka - 1:5.41-2 - make F-14 (sysv init) -> F-15 (systemd) transition more robust * Fri Jun 10 2011 Michal Hlavinka - 1:5.41-1 - updated to 5.41 * Mon May 16 2011 Michal Hlavinka - 1:5.40-10 - fix path to notify script (#675778) * Fri Mar 11 2011 Michal Hlavinka - 1:5.40-9 - fix typos in man page * Fri Mar 04 2011 Michal Hlavinka - 1:5.40-8 - don't call chkconfig add, we use systemd now * Thu Mar 03 2011 Michal Hlavinka - 1:5.40-7 - own %%{_datadir}/%%{name} and %%{_libexecdir}/%%{name} dirs * Thu Feb 17 2011 Michal Hlavinka - 1:5.40-6 - notify users when disk is failing * Wed Feb 09 2011 Michal Hlavinka - 1:5.40-5 - move to systemd * Wed Feb 09 2011 Fedora Release Engineering - 1:5.40-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_15_Mass_Rebuild * Mon Nov 15 2010 Michal Hlavinka - 1:5.40-3 - megaraid: Fix segfault on non-data commands (#577935) * Tue Nov 09 2010 Michal Hlavinka - 1:5.40-2 - don't forget to restart smartd service after update (#651211) * Mon Oct 18 2010 Michal Hlavinka - 1:5.40-1 - updated to 5.40 final * Mon Sep 27 2010 Michal Hlavinka - 1:5.39.1-2.r3169 - updated to r3169 - ddds riverdb support for new devices (#637171) * Fri Jan 29 2010 Michal Hlavinka - 1:5.39.1-1 - updated to 5.39.1 - Fix spin-up of SATA drive if '-n standby' is used. * Wed Jan 20 2010 Michal Hlavinka - 1:5.39-2 - fix DEVICESCAN -d sat - fix directive '-l selftest' - fix option '-q, --quietmode' * Thu Dec 10 2009 Michal Hlavinka - 1:5.39-1 - update to 5.39 * Wed Dec 02 2009 Michal Hlavinka - 1:5.39-0.1.rc1 - update to 5.39-rc1 * Wed Nov 25 2009 Michal Hlavinka - 1:5.38-25.20091119svn - spec cleanup * Mon Nov 23 2009 Michal Hlavinka - 1:5.38-24.20091119svn - move powermode option from sysconfig to smartd.conf (#539760) * Thu Nov 19 2009 Michal Hlavinka - 1:5.38-23.20091119svn - update to svn snapshot 2009-11-19 - remove upstreamed patches * Mon Nov 02 2009 Michal Hlavinka - 1:5.38-22 - spec cleanup * Mon Oct 12 2009 Michal Hlavinka - 1:5.38-21 - warn about disabled mail only if capabilities are enabled * Fri Oct 09 2009 Michal Hlavinka - 1:5.38-20 - fix init script for case when no action was specified * Fri Oct 09 2009 Michal Hlavinka - 1:5.38-19 - make init script lsb compliant (#528016) * Mon Oct 05 2009 Michal Hlavinka - 1:5.38-18 - bump release for rebuild * Mon Oct 05 2009 Michal Hlaivnka - 1:5.38-17 - make capabilities optional - fix capabilities for 3ware contollers (#526626) * Wed Aug 26 2009 Michal Hlavinka - 1:5.38-16 - extend capability scanning devices * Wed Aug 26 2009 Michal Hlavinka - 1:5.38-15 - updated patch for lower capabilities (#517728) - added buildrequires libcap-ng-devel * Fri Aug 21 2009 Michal Hlavinka - 1:5.38-14 - drop all unnecessary capabilities (#517728) * Sun Jul 26 2009 Fedora Release Engineering - 1:5.38-13 - Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild * Thu Jun 11 2009 Michal Hlavinka - 1:5.38-12 - drop autogen call * Sat Apr 11 2009 Dennis Gilmore - 1:5.38-11 - remove ExclusiveArch use -fPIE on sparc64 - tested builds on sparcv9 sparc64 and s390x * Mon Mar 09 2009 Michal Hlavinka - 1:5.38-10 - cleanup for merge review * Fri Feb 27 2009 Tom "spot" Callaway - 1:5.38-9 - fix ExclusiveArch * Wed Feb 25 2009 Fedora Release Engineering - 1:5.38-8 - Rebuilt for https://fedoraproject.org/wiki/Fedora_11_Mass_Rebuild * Mon Aug 11 2008 Tomas Smetana - 1:5.38-7 - fix #458549 - obsolete smartmontools-config - change the default configuration file * Fri Aug 08 2008 Tomas Smetana - 1:5.38-6 - correct CXXFLAGS so the PIE code is produced * Mon May 12 2008 Tomas Smetana - 1:5.38-5 - remove config subpackage * Mon May 05 2008 Tomas Smetana - 1:5.38-4.1 - add libselinux-devel to BR * Mon May 05 2008 Tomas Smetana - 1:5.38-4 - fix #232218 character devices /dev/twa* for 3ware 9000 series RAID controllers are not created * Thu Mar 27 2008 Tomas Smetana - 1:5.38-3 - don't attempt to query DELL PERC controllers -- they'd go offline * Tue Mar 18 2008 Tomas Smetana - 1:5.38-2 - fix FD_CLOEXEC on SCSI device file descriptors not being set * Mon Mar 10 2008 Tomas Smetana - 1:5.38-1 - new upstream version * Tue Feb 12 2008 Tomas Smetana - 1:5.37-8.5 - rebuild (gcc-4.3) * Tue Jan 15 2008 Tomas Smetana - 1:5.37-8.4 - change '-d ata' to '-d sat' in the config script for SATA drives * Wed Dec 12 2007 Tomas Smetana - 1:5.37-8.3 - fix #375791 - parameter warning for smartd in logwatch output * Wed Oct 31 2007 Tomas Smetana - 1:5.37-8.2 - rebuild (one more error in autogen.sh) * Wed Oct 31 2007 Tomas Smetana - 1:5.37-8.1 - fix build with new automake * Wed Oct 31 2007 Tomas Smetana - 1:5.37-8 - fix #359561 - typo in smartd-conf.py causes smartd to skip all disks * Mon Oct 15 2007 Tomas Smetana - 1:5.37-7.1 - improved patch for getaddrinfo * Fri Oct 12 2007 Tomas Smetana - 1:5.37-7 - replace gethostbyname with getaddrinfo * Tue Sep 04 2007 Tomas Smetana - 1:5.37-6 - fix #271741 - smartd-conf.py should allow customization of parameters - fix #253753 - service starting by default, perhaps shouldn't - update initscript (related #247058 - initscript review) * Mon Aug 20 2007 Tomas Smetana - 1:5.37-5 - add support for 24 disks on 3ware RAID controllers (related #252055) - fix #245442 - add %%{arm} to smartmontools's set of build archs - update license tag * Thu Jun 21 2007 Tomas Smetana - 1:5.37-4 - fix #241389 - smartd-conf.py pulls in a big dependency chain, so build a separate config package * Tue Jun 05 2007 Tomas Smetana - 1:5.37-3 - fix #241385 - smartmontools missing dependency on mailx - fix #241388 - unneeded smartd-conf.py[co] installed in /usr/sbin * Wed Mar 7 2007 Vitezslav Crhonek - 1:5.37-2 - re-add cloexec patch - re-add one erased changelog entry - compile with -fpie (instead of -fpic) * Tue Feb 27 2007 Vitezslav Crhonek - 1:5.37-1 - new upstream version * Thu Feb 22 2007 Tomas Mraz - 1:5.36-8 - enable SMART on disks when smartd-conf.py runs (fix by Calvin Ostrum) (#214502) * Mon Feb 12 2007 Tomas Mraz - 1:5.36-7 - redirect service script output to null (#224566) * Sun Feb 11 2007 Florian La Roche - 1:5.36-6 - make sure the preun script does not fail * Tue Nov 7 2006 Tomas Mraz - 1:5.36-5 - set cloexec on device descriptor so it doesn't leak to sendmail (#214182) - fixed minor bug in initscript (#213683) - backported SATA disk detection from upstream * Fri Aug 18 2006 Jesse Keating - 1:5.36-3 - rebuilt with latest binutils to pick up 64K -z commonpagesize on ppc* (#203001) * Wed Jul 12 2006 Jesse Keating - 1:5.36-2.1 - rebuild * Tue Jun 27 2006 Tomas Mraz - 1:5.36-2 - kudzu is deprecated, replace it with HAL (#195752) - moved later in the boot process so haldaemon is already running when drives are being detected * Thu May 11 2006 Tomas Mraz - 1:5.36-1 - new upstream version - included patch with support for cciss controllers (#191288) * Tue May 2 2006 Tomas Mraz - 1:5.33-8 - regenerate smartd.conf on every startup if the config file is autogenerated (#190065) * Fri Mar 24 2006 Tomas Mraz - 1:5.33-7 - add missing quotes to /etc/sysconfig/smartmontools * Wed Mar 22 2006 Tomas Mraz - 1:5.33-6 - test SATA drives correctly * Wed Mar 22 2006 Tomas Mraz - 1:5.33-5 - add default /etc/sysconfig/smartmontools file - ignore errors on startup (#186130) - test drive for SMART support before adding it to smartd.conf * Fri Feb 10 2006 Jesse Keating - 1:5.33-4.2 - bump again for double-long bug on ppc(64) * Tue Feb 07 2006 Jesse Keating - 1:5.33-4.1 - rebuilt for new gcc4.1 snapshot and glibc changes * Fri Dec 16 2005 Tomas Mraz 1:5.33-4 - mail should be sent to root not root@localhost (#174252) * Fri Nov 25 2005 Tomas Mraz 1:5.33-3 - add libata disks with -d ata if the libata version is new enough otherwise do not add them (#145859, #174095) * Thu Nov 3 2005 Tomas Mraz 1:5.33-2 - Spec file cleanup by Robert Scheck (#170959) - manual release numbering - remove bogus patch of non-installed file - only non-removable drives should be added to smartd.conf - smartd.conf should be owned (#171498) * Tue Oct 25 2005 Dave Jones - Add comments to generated smartd.conf (#135397) * Thu Aug 04 2005 Karsten Hopp - package all python files * Tue Mar 1 2005 Dave Jones - Rebuild for gcc4 * Wed Feb 9 2005 Dave Jones - Build on PPC32 too (#147090) * Sat Dec 18 2004 Dave Jones - Initial packaging, based upon kernel-utils.