#!/usr/bin/python
# Copyright 2004-2006 Red Hat, Inc. Distributed under the GPL.
# Authors: Will Woods <wwoods@redhat.com>, Tomas Mraz <tmraz@redhat.com>

import os
import dbus

class Drive:
    def __init__(self, bus, device, sysfspath):
        self.bus = bus
        self.device = device
        self.sysfspath = sysfspath

def listDrivesbyHAL():
    drives = []
    bus = dbus.SystemBus()
    halm_obj = bus.get_object('org.freedesktop.Hal', '/org/freedesktop/Hal/Manager')
    halm = dbus.Interface(halm_obj, 'org.freedesktop.Hal.Manager')

    storage_udi_list = halm.FindDeviceByCapability('storage')
    for udi in storage_udi_list:
        drive_obj = bus.get_object('org.freedesktop.Hal', udi)
        drive = dbus.Interface(drive_obj, 'org.freedesktop.Hal.Device')
        storage_bus = drive.GetProperty('storage.bus')
        drive_type = drive.GetProperty('storage.drive_type')
        if (storage_bus == 'ide' or storage_bus == 'scsi') and drive_type == 'disk':
            device_file = drive.GetProperty('block.device')
            sysfs_path = drive.GetProperty('linux.sysfs_path')
            drv = Drive(storage_bus, device_file, sysfs_path)
            drives += [drv]
    return drives
                                                                  
drives = listDrivesbyHAL()

print """# *SMARTD*AUTOGENERATED* /etc/smartd.conf
# Remove the line above if you have edited the file and you do not want
# it to be overwritten on the next smartd startup.

# Sample configuration file for smartd.  See man 5 smartd.conf.
# Home page is: http://smartmontools.sourceforge.net

# The file gives a list of devices to monitor using smartd, with one
# device per line. Text after a hash (#) is ignored, and you may use
# spaces and tabs for white space. You may use '\\' to continue lines.

# You can usually identify which hard disks are on your system by
# looking in /proc/ide and in /proc/scsi.

# The word DEVICESCAN will cause any remaining lines in this
# configuration file to be ignored: it tells smartd to scan for all
# ATA and SCSI devices.  DEVICESCAN may be followed by any of the
# Directives listed below, which will be applied to all devices that
# are found.  Most users should comment out DEVICESCAN and explicitly
# list the devices that they wish to monitor.
# DEVICESCAN

# First (primary) ATA/IDE hard disk.  Monitor all attributes
# /dev/hda -a

# Monitor SMART status, ATA Error Log, Self-test log, and track
# changes in all attributes except for attribute 194
# /dev/hdb -H -l error -l selftest -t -I 194

# A very silent check.  Only report SMART health status if it fails
# But send an email in this case"""

def getfile(fname):
    try:
        fh = open(fname)
        line = fh.read().rstrip()
        fh.close()
    except IOError:
        line = ''
    return line

try:
    execfile('/etc/sysconfig/smartmontools')
except IOError:
    pass

for drive in drives:
    if getfile("%s/removable" % drive.sysfspath) == '0':
        driver = ''
        comment = ''
    if getfile("%s/device/vendor" % drive.sysfspath) == 'ATA':
        driver = '-d sat'
        if float(getfile("/sys/module/libata/version")) < 1.20:
            comment = "# not yet supported in this kernel version\n# "
    if not comment:
        status = os.system("/usr/sbin/smartctl -s on -i %s %s 2>&1 >/dev/null" %
        (driver, drive.device))
        if not os.WIFEXITED(status) or os.WEXITSTATUS(status) != 0:
            comment = "# smartctl -i returns error for this drive\n# "
    try:
        print "%s%s %s %s" % (comment, drive.device, driver, smartd_conf_opts)
    except NameError:
        print "%s%s %s -H -m root" % (comment, drive.device, driver)

print """
# First two SCSI disks.  This will monitor everything that smartd can
# monitor.
# /dev/sda -d scsi
# /dev/sdb -d scsi

# HERE IS A LIST OF DIRECTIVES FOR THIS CONFIGURATION FILE
#   -d TYPE Set the device type to one of: ata, scsi
#   -T TYPE set the tolerance to one of: normal, permissive
#   -o VAL  Enable/disable automatic offline tests (on/off)
#   -S VAL  Enable/disable attribute autosave (on/off)
#   -H      Monitor SMART Health Status, report if failed
#   -l TYPE Monitor SMART log.  Type is one of: error, selftest
#   -f      Monitor for failure of any 'Usage' Attributes
#   -m ADD  Send warning email to ADD for -H, -l error, -l selftest, and -f
#   -M TYPE Modify email warning behavior (see man page)
#   -p      Report changes in 'Prefailure' Normalized Attributes
#   -u      Report changes in 'Usage' Normalized Attributes
#   -t      Equivalent to -p and -u Directives
#   -r ID   Also report Raw values of Attribute ID with -p, -u or -t
#   -R ID   Track changes in Attribute ID Raw value with -p, -u or -t
#   -i ID   Ignore Attribute ID for -f Directive
#   -I ID   Ignore Attribute ID for -p, -u or -t Directive
#   -v N,ST Modifies labeling of Attribute N (see man page)
#   -a      Default: equivalent to -H -f -t -l error -l selftest
#   -F TYPE Use firmware bug workaround. Type is one of: none, samsung
#   -P TYPE Drive-specific presets: use, ignore, show, showall
#    #      Comment: text after a hash sign is ignored
#    \      Line continuation character
# Attribute ID is a decimal integer 1 <= ID <= 255
# All but -d, -m and -M Directives are only implemented for ATA devices
#
# If the test string DEVICESCAN is the first uncommented text
# then smartd will scan for devices /dev/hd[a-l] and /dev/sd[a-z]
# DEVICESCAN may be followed by any desired Directives."""