From 57394e37d3ac543ed5a4fd3dc63222fd35579d47 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 25 Oct 2005 09:08:33 +0000 Subject: [PATCH] Add comments to generated smartd.conf (#135397) --- smartd-conf.py | 72 ++++++++++++++++++++++++++++++++++++++++++++-- smartmontools.spec | 5 +++- 2 files changed, 73 insertions(+), 4 deletions(-) diff --git a/smartd-conf.py b/smartd-conf.py index 3f1ac22..dc37e1f 100755 --- a/smartd-conf.py +++ b/smartd-conf.py @@ -3,7 +3,73 @@ # Author: Will Woods import kudzu drives=kudzu.probe(kudzu.CLASS_HD,kudzu.BUS_IDE|kudzu.BUS_SCSI,kudzu.PROBE_ALL) + +print """# /etc/smartd.conf + +# Sample configuration file for smartd. See man 5 smartd.conf. +# Home page is: http://smartmontools.sourceforge.net + +# The file gives a list of devices to monitor using smartd, with one +# device per line. Text after a hash (#) is ignored, and you may use +# spaces and tabs for white space. You may use '\\' to continue lines. + +# You can usually identify which hard disks are on your system by +# looking in /proc/ide and in /proc/scsi. + +# The word DEVICESCAN will cause any remaining lines in this +# configuration file to be ignored: it tells smartd to scan for all +# ATA and SCSI devices. DEVICESCAN may be followed by any of the +# Directives listed below, which will be applied to all devices that +# are found. Most users should comment out DEVICESCAN and explicitly +# list the devices that they wish to monitor. +# DEVICESCAN + +# First (primary) ATA/IDE hard disk. Monitor all attributes +# /dev/hda -a + +# Monitor SMART status, ATA Error Log, Self-test log, and track +# changes in all attributes except for attribute 194 +# /dev/hdb -H -l error -l selftest -t -I 194 + +# A very silent check. Only report SMART health status if it fails +# But send an email in this case""" + for drive in drives: - fh=open("/sys/block/%s/removable" % drive.device) - if fh.read(1) == '0': - print "/dev/%s -H -m root@localhost.localdomain" % drive.device + print "/dev/%s -H -m root@localhost" % drive.device + +print """ +# First two SCSI disks. This will monitor everything that smartd can +# monitor. +# /dev/sda -d scsi +# /dev/sdb -d scsi + +# HERE IS A LIST OF DIRECTIVES FOR THIS CONFIGURATION FILE +# -d TYPE Set the device type to one of: ata, scsi +# -T TYPE set the tolerance to one of: normal, permissive +# -o VAL Enable/disable automatic offline tests (on/off) +# -S VAL Enable/disable attribute autosave (on/off) +# -H Monitor SMART Health Status, report if failed +# -l TYPE Monitor SMART log. Type is one of: error, selftest +# -f Monitor for failure of any 'Usage' Attributes +# -m ADD Send warning email to ADD for -H, -l error, -l selftest, and -f +# -M TYPE Modify email warning behavior (see man page) +# -p Report changes in 'Prefailure' Normalized Attributes +# -u Report changes in 'Usage' Normalized Attributes +# -t Equivalent to -p and -u Directives +# -r ID Also report Raw values of Attribute ID with -p, -u or -t +# -R ID Track changes in Attribute ID Raw value with -p, -u or -t +# -i ID Ignore Attribute ID for -f Directive +# -I ID Ignore Attribute ID for -p, -u or -t Directive +# -v N,ST Modifies labeling of Attribute N (see man page) +# -a Default: equivalent to -H -f -t -l error -l selftest +# -F TYPE Use firmware bug workaround. Type is one of: none, samsung +# -P TYPE Drive-specific presets: use, ignore, show, showall +# # Comment: text after a hash sign is ignored +# \ Line continuation character +# Attribute ID is a decimal integer 1 <= ID <= 255 +# All but -d, -m and -M Directives are only implemented for ATA devices +# +# If the test string DEVICESCAN is the first uncommented text +# then smartd will scan for devices /dev/hd[a-l] and /dev/sd[a-z] +# DEVICESCAN may be followed by any desired Directives.""" + diff --git a/smartmontools.spec b/smartmontools.spec index 76e8134..eee9fa1 100644 --- a/smartmontools.spec +++ b/smartmontools.spec @@ -1,7 +1,7 @@ Summary: Tools for monitoring SMART capable hard disks. Name: smartmontools Version: 5.33 -Release: %(R="$Revision: 1.6 $"; RR="${R##: }"; echo ${RR%%?}) +Release: %(R="$Revision: 1.7 $"; RR="${R##: }"; echo ${RR%%?}) Epoch: 1 Group: System Environment/Base License: GPL @@ -75,6 +75,9 @@ exit 0 %changelog +* Tue Oct 25 2005 Dave Jones +- Add comments to generated smartd.conf (#135397) + * Thu Aug 04 2005 Karsten Hopp - package all python files