Add /etc/containers/certs.d to containers-common

Update containers-storage.conf man page to match latest upstream
Update registries.conf man page to match latest upstream

containers-storage.conf.5.md

@@ -39,8 +39,10 @@ The `storage` table supports the following options:
 **driver**=""
   container storage driver (default: "overlay")
   Default Copy On Write (COW) container storage driver
+  Valid drivers are "overlay", "vfs", "devmapper", "aufs", "btrfs", and "zfs"
+  Some drivers (for example, "zfs", "btrfs", and "aufs") may not work if your kernel lacks support for the filesystem
 
-### STORAGE OPTIONS TABLE 
+### STORAGE OPTIONS TABLE
 
 The `storage.options` table supports the following options:
 
@@ -50,11 +52,6 @@ The `storage.options` table supports the following options:
 **size**=""
   Maximum size of a container image.   This flag can be used to set quota on the size of container images. (default: 10GB)
 
-**override_kernel_check**=""
-  Tell storage drivers to ignore kernel version checks.  Some storage drivers assume that if a kernel is too
-  old, the driver is not supported.  But for kernels that have had the drivers backported, this flag
-  allows users to override the checks
-
 **mount_program**=""
   Specifies the path to a custom program to use instead for mounting the file system.
 

registries.conf.5.md

@@ -1,39 +1,56 @@
-% registries.conf(5) Container Registries Configuration File
+% CONTAINERS-REGISTRIES.CONF(5) System-wide registry configuration file
-% Dan Walsh
+% Brent Baude
-% March 2018
+% Aug 2017
 
-## NAME
+# NAME
-registries.conf - Syntax of Container Registries configuration file
+containers-registries.conf - Syntax of System Registry Configuration File
 
-## DESCRIPTION
+# DESCRIPTION
-The REGISTRIES configuration file specifies all of the available container registries for tools using shared container registries, but in a TOML format that can be more easily modified and versioned. `registries.conf` does not support recursive lists of registries. The default location for this configuration file is `/etc/containers/registries.conf`.
+The CONTAINERS-REGISTRIES configuration file is a system-wide configuration
+file for container image registries. The file format is TOML. The valid
+categories are: 'registries.search', 'registries.insecure', and
+'registries.block'.
 
-The only valid categories are: `registries.search`, `registries.insecure`, and `registries.block`.
+By default, the configuration file is located at `/etc/containers/registries.conf`.
 
+# FORMAT
+The TOML_format is used to build a simple list format for registries under three
+categories: `registries.search`, `registries.insecure`, and `registries.block`.
+You can list multiple registries using a comma separated list.
 
-## FORMAT
+Search registries are used when the caller of a container runtime does not fully specify the
-The [TOML format][toml] is used as the encoding of the configuration file.
+container image that they want to execute.  These registries are prepended onto the front
-Every option and subtable listed here is nested under a global "registries" table.
+of the specified container image until the named image is found at a registry.
-No bare options are used.
 
-## Examples
+Insecure Registries.  By default container runtimes use TLS when retrieving images
-    [registries.search]
+from a registry.  If the registry is not setup with TLS, then the container runtime
-    registries = ['quay.io', 'docker.io', 'registries.unsafe.com', 'registry.fedoraproject.org', 'registry.access.redhat.com']
+will fail to pull images from the registry. If you add the registry to the list of
+insecure registries then the container runtime will attempt use standard web protocols to
+pull the image.  It also allows you to pull from a registry with self-signed certificates.
+Note insecure registries can be used for any registry, not just the registries listed
+under search.
 
-    # If you need to access insecure registries, add the registry's fully-qualified name.
+Block Registries.  The registries in this category are are not pulled from when
-    # An insecure registry is one that does not have a valid SSL certificate or only does HTTP.
+retrieving images.
-    [registries.insecure]
-    registries = ['registries.unsafe.com']
 
-    # If you need to block push access from a registry, uncomment the section below
+# EXAMPLE
-    # and add the registries fully-qualified name.
+The following example configuration defines two searchable registries, one
-    #
+insecure registry, and two blocked registries.
-    # Docker only
-    [registries.block]
-    registries = []
 
-## Files
+```
-/etc/conainers/registries.conf
+[registries.search]
+registries = ['registry1.com', 'registry2.com']
 
-## HISTORY
+[registries.insecure]
-March 2018, Originally compiled by Dan Walsh <dwalsh@redhat.com>
+registries = ['registry3.com']
+
+[registries.block]
+registries = ['registry.untrusted.com', 'registry.unsafe.com']
+```
+
+# HISTORY
+Aug 2018, Renamed to containers-registries.conf(5) by Valentin Rothberg <vrothberg@suse.com>
+
+Jun 2018, Updated by Tom Sweeney <tsweeney@redhat.com>
+
+Aug 2017, Originally compiled by Brent Baude <bbaude@redhat.com>

skopeo.spec

@@ -38,7 +38,7 @@ Epoch: 1
 Epoch: 0
 %endif
 Version: 0.1.35
-Release: 12.dev.git%{shortcommit0}%{?dist}
+Release: 13.dev.git%{shortcommit0}%{?dist}
 Summary: Inspect Docker images and repositories on registries
 License: ASL 2.0
 URL: %{git0}
@@ -285,6 +285,7 @@ mkdir -p %{buildroot}%{_mandir}/man5
 go-md2man -in %{SOURCE2} -out %{buildroot}%{_mandir}/man5/containers-storage.conf.5
 go-md2man -in %{SOURCE4} -out %{buildroot}%{_mandir}/man5/registries.conf.5
 install -p -m 644 %{SOURCE5} %{buildroot}%{_sysconfdir}/containers/
+mkdir -p %{buildroot}%{_sysconfdir}/containers/certs.d
 go-md2man -in %{SOURCE6} -out %{buildroot}%{_mandir}/man5/policy.json.5
 
 mkdir -p %{buildroot}%{_datadir}/containers
@@ -356,6 +357,7 @@ export GOPATH=%{buildroot}/%{gopath}:$(pwd)/vendor:%{gopath}
 
 %files -n containers-common
 %dir %{_sysconfdir}/containers
+%dir %{_sysconfdir}/containers/certs.d
 %dir %{_sysconfdir}/containers/registries.d
 %config(noreplace) %{_sysconfdir}/containers/policy.json
 %config(noreplace) %{_sysconfdir}/containers/registries.d/default.yaml
@@ -381,6 +383,11 @@ export GOPATH=%{buildroot}/%{gopath}:$(pwd)/vendor:%{gopath}
 %{_datadir}/bash-completion/completions/%{name}
 
 %changelog
+* Fri Mar 1 2019 Dan Walsh <dwalsh@fedoraproject.org> - 1:0.1.35-13.dev.git932b037
+- Add /etc/containers/certs.d to containers-common
+- Update containers-storage.conf man page to match latest upstream
+- Update registries.conf man page to match latest upstream
+
 * Sat Feb 23 2019 Lokesh Mandvekar (Bot) <lsm5+bot@fedoraproject.org> - 1:0.1.35-12.dev.git932b037
 - autobuilt 932b037