rpms/sg3_utils
7
0
Fork 0
Code Issues Pull Requests Releases Activity

remove upstreamed files

Browse Source
This commit is contained in:
Dan Horák 2014-04-18 21:49:19 +02:00
parent 9070058056
commit 55d6d524e5
2 changed files with 0 additions and 185 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

90
rescan-scsi-bus.sh.8
View File

@ -1,90 +0,0 @@
.\" DO NOT MODIFY THIS FILE! It was generated by help2man 1.41.2.
.TH RESCAN-SCSI-BUS.SH "1" "leden 2014" "rescan-scsi-bus.sh 1.57" "User Commands"
.SH NAME
rescan-scsi-bus.sh \- script for adding and removing SCSI devices without rebooting
.SH SYNOPSIS
.B rescan-scsi-bus.sh
[\fIoptions\fR] [\fIhost \fR[\fIhost \fR...]]
.SH OPTIONS
.TP
\fB\-a\fR, \fB\-\-alltargets\fR
scan all targets, not just currently existing [default: disabled]
.TP
\fB\-d\fR
enable debug [default: 0]
.TP
\fB\-l\fR
activates scanning for LUNs 0\-\-7 [default: 0]
.TP
\fB\-L\fR NUM
activates scanning for LUNs 0\-\-NUM [default: 0]
.TP
\fB\-w\fR, \fB\-\-wide\fR
scan for target device IDs 0\-\-15 [default: 0\-\-7]
.TP
\fB\-c\fR
enables scanning of channels 0 1 [default: 0 / all detected ones]
.TP
\fB\-r\fR, \fB\-\-remove\fR
enables removing of devices [default: disabled]
.TP
\fB\-f\fR, \fB\-\-flush\fR
flush failed multipath devices [default: disabled]
.TP
\fB\-i\fR, \fB\-\-issue\-lip\fR
issue a FibreChannel LIP reset [default: disabled]
.TP
\fB\-u\fR, \fB\-\-update\fR
look for existing disks that have been remapped
.TP
\fB\-s\fR, \fB\-\-resize\fR
look for resized disks and reload associated multipath devices, if applicable
.TP
\fB\-\-forcerescan\fR
rescan existing devices
.TP
\fB\-\-forceremove\fR
remove and readd every device (DANGEROUS)
.TP
\fB\-\-nooptscan\fR
don't stop looking for LUNs is 0 is not found
.TP
\fB\-\-color\fR
use coloured prefixes OLD/NEW/DEL
.TP
\fB\-\-hosts\fR=\fILIST\fR
scan only host(s) in \fILIST\fR
.TP
\fB\-\-channels\fR=\fILIST\fR
scan only channel(s) in \fILIST\fR
.TP
\fB\-\-ids\fR=\fILIST\fR
scan only target ID(s) in \fILIST\fR
.TP
\fB\-\-luns\fR=\fILIST\fR
scan only lun(s) in \fILIST\fR
.TP
\fB\-\-sync\fR, \fB\-\-nosync\fR
issue a sync / no sync [default: sync if remove]
.TP
\fB\-\-attachpq3\fR
tell kernel to attach sg to LUN 0 that reports PQ=3
.TP
\fB\-\-reportlun2\fR
tell kernel to try REPORT_LUN even on SCSI2 devices
.TP
\fB\-\-largelun\fR
tell kernel to support LUNs > 7 even on SCSI2 devs
.TP
\fB\-\-sparselun\fR
tell kernel to support sparse LUN numbering
.IP
Host numbers may thus be specified either directly on cmd line (deprecated) or
or with the \fB\-\-hosts\fR=\fILIST\fR parameter (recommended).
.PP
\fILIST\fR: A[\-B][,C[\-D]]... is a comma separated list of single values and ranges
(No spaces allowed.)
.SH SEE ALSO
\fBrescan-scsi-bus.sh\fR Homepage: \fBhttp://www.garloff.de/kurt/linux/#rescan-scsi\fR
.PP
\fBsg3_utils\fR Homepage: \fBhttp://sg.danny.cz/sg\fR

95
sg3_utils-1.37-man-pages-fix.patch
View File

@ -1,95 +0,0 @@
From 1653f314de9f0a0415259f2182bf65a745537f33 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Dan=20Hor=C3=A1k?= <dan@danny.cz>
Date: Tue, 28 Jan 2014 14:15:56 +0100
Subject: [PATCH] remove duplicit words in man pages
---
doc/sg3_utils.8 | 2 +-
doc/sg_format.8 | 2 +-
doc/sg_get_lba_status.8 | 2 +-
doc/sg_ses.8 | 2 +-
doc/sg_stpg.8 | 2 +-
doc/sginfo.8 | 2 +-
6 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/doc/sg3_utils.8 b/doc/sg3_utils.8
index ae9b181..d295eeb 100644
--- a/doc/sg3_utils.8
+++ b/doc/sg3_utils.8
@@ -146,7 +146,7 @@ drives and "cd" for SCSI CD/DVD/BD drives. Each SCSI device has a
corresponding pass\-through device name of the form /dev/pass<num>
where <num> is an integer starting at zero. The "camcontrol devlist"
command may be useful for finding out which SCSI device names are
-available and the correspondence between between class and pass\-through
+available and the correspondence between class and pass\-through
names.
.SH SOLARIS DEVICE NAMING
SCSI device names below the /dev directory have a form like: c5t4d3s2
diff --git a/doc/sg_format.8 b/doc/sg_format.8
index 4cf4e82..055ff04 100644
--- a/doc/sg_format.8
+++ b/doc/sg_format.8
@@ -265,7 +265,7 @@ protection type of a disk can be found in the "P_TYPE" and "PROT_EN"
fields in the response of a READ CAPACITY (16) command (e.g. with
the 'sg_readcap \-\-long' utility).
.PP
-Given that a device supports a particular protection type, a user can then
+Given that a device supports a particular protection type, a user can
then choose to format that disk with that protection type by setting
the "FMTPINFO" and "Protection Field Usage" fields in the FORMAT UNIT
command. Those fields correspond to the \fI\-\-fmtpinfo=FPI\fR and the
diff --git a/doc/sg_get_lba_status.8 b/doc/sg_get_lba_status.8
index ab8269c..bbb0c09 100644
--- a/doc/sg_get_lba_status.8
+++ b/doc/sg_get_lba_status.8
@@ -28,7 +28,7 @@ when use once then one LBA status descriptor per line is output to stdout.
Each line has this
format: "0x<descriptor_LBA> 0x<blocks> <provisioning_status>". So the
descriptor LBA and blocks are output in hex and the provisioning status
-in decimal. When used twice (e.g. '\-bb' or '\-\-brief \-\-brief') the
+in decimal. When used twice (e.g. '\-bb' or '\-\-brief \-\-brief')
the provisioning status of the given \fILBA\fR (or LBA 0 if the
\fI\-\-lba\fR option is not given) is output to stdout. A check is made
that the given \fILBA\fR lies on the range of the first returned LBA
diff --git a/doc/sg_ses.8 b/doc/sg_ses.8
index 1cd71c5..a94fe48 100644
--- a/doc/sg_ses.8
+++ b/doc/sg_ses.8
@@ -237,7 +237,7 @@ given.
.PP
One of two command lines variants can be used to specify indexes:
\fI\-\-index=TIA,II\fR where \fITIA\fR is either an type header index (TI)
-or an Element type abbreviation (A) (e.g. "ps" or "ps1"). \fIII\fR is
+or an Element type abbreviation (A) (e.g. "ps" or "ps1"). \fIII\fR
is either an individual index or "\-1" to specify the overall element. The
second variant is \fI\-\-index=IIA\fR where \fIIIA\fR is either an individual
index (II) or an Element type abbreviation (A). When \fIIIA\fR is an
diff --git a/doc/sg_stpg.8 b/doc/sg_stpg.8
index f93f029..8ab6b1a 100644
--- a/doc/sg_stpg.8
+++ b/doc/sg_stpg.8
@@ -104,7 +104,7 @@ identifier (i.e. acts on one or more target ports).
When \fI\-\-tp=\fR is given then the same number of elements should be
given to the \fI\-\-state=\fR option. If more than one list element is
given to \fI\-\-tp=\fR and an equal number of elements is _not_ given
-to the the \fI\-\-state=\fR option, then if only one state is specified
+to the \fI\-\-state=\fR option, then if only one state is specified
then it is repeated.
.SH EXIT STATUS
The exit status of sg_stpg is 0 when it is successful. Otherwise see
diff --git a/doc/sginfo.8 b/doc/sginfo.8
index 8d570b1..7abff65 100644
--- a/doc/sginfo.8
+++ b/doc/sginfo.8
@@ -287,7 +287,7 @@ hex (mode page index in the first column and the corresponding byte
value in the second column) use "\-u 0xa". Mode pages (subpage code == 0)
start at index position 2 while subpages start at index position 4.
If the "\-Xu ..." option is used then a list a hex values each value
-prefixed by "@" is output. Mode (sub)page values can then be modified with
+prefixed by "@" is output. Mode (sub)page values can then be modified
with the "\-RXu ..." option.
.PP
.SH RESTRICTIONS
--
1.8.1.4