.gitignore

@@ -1,2 +1,2 @@
-SOURCES/sane-backends-1.0.27.tar.gz
+SOURCES/sane-backends-1.0.32.tar.gz
 SOURCES/sane.png

.sane-backends.metadata

@@ -1,2 +1,2 @@
-579ec4d6279c7f0f02014358a7e74056672a1e43 SOURCES/sane-backends-1.0.27.tar.gz
+97b14808e1ab4bc4c38962372d13d37d9b9fb08b SOURCES/sane-backends-1.0.32.tar.gz
 338783a09c91bf1cc1a3bda838a9e7568563e02e SOURCES/sane.png

SOURCES/0001-epson2-Rewrite-network-I-O.patch

@@ -1,225 +0,0 @@
-diff -up sane-backends-1.0.27/backend/epson2_net.c.epsonds-issues sane-backends-1.0.27/backend/epson2_net.c
---- sane-backends-1.0.27/backend/epson2_net.c.epsonds-issues	2016-10-06 02:02:57.000000000 +0200
-+++ sane-backends-1.0.27/backend/epson2_net.c	2020-07-28 15:04:58.385405722 +0200
-@@ -32,11 +32,12 @@
- 
- #include "sane/sanei_debug.h"
- 
--static int
-+static ssize_t
- sanei_epson_net_read_raw(Epson_Scanner *s, unsigned char *buf, ssize_t wanted,
- 		       SANE_Status *status)
- {
--	int ready, read = -1;
-+	int ready;
-+	ssize_t read = -1;
- 	fd_set readable;
- 	struct timeval tv;
- 
-@@ -62,111 +63,136 @@ sanei_epson_net_read_raw(Epson_Scanner *
- 	return read;
- }
- 
--int
--sanei_epson_net_read(Epson_Scanner *s, unsigned char *buf, ssize_t wanted,
-+static ssize_t
-+sanei_epson_net_read_buf(Epson_Scanner *s, unsigned char *buf, ssize_t wanted,
- 		       SANE_Status * status)
- {
--	ssize_t size;
- 	ssize_t read = 0;
--	unsigned char header[12];
- 
--	/* read from buffer, if available */
--	if (s->netptr != s->netbuf) {
--		DBG(23, "reading %lu from buffer at %p, %lu available\n",
--			(u_long) wanted, s->netptr, (u_long) s->netlen);
-+	DBG(23, "%s: reading up to %lu from buffer at %p, %lu available\n",
-+		__func__, (u_long) wanted, s->netptr, (u_long) s->netlen);
- 
--		memcpy(buf, s->netptr, wanted);
--		read = wanted;
-+	if ((size_t) wanted > s->netlen) {
-+		*status = SANE_STATUS_IO_ERROR;
-+		wanted = s->netlen;
-+	}
- 
--		s->netlen -= wanted;
-+	memcpy(buf, s->netptr, wanted);
-+	read = wanted;
- 
--		if (s->netlen == 0) {
--			DBG(23, "%s: freeing %p\n", __func__, s->netbuf);
--			free(s->netbuf);
--			s->netbuf = s->netptr = NULL;
--			s->netlen = 0;
--		}
-+	s->netptr += read;
-+	s->netlen -= read;
- 
--		return read;
-+	if (s->netlen == 0) {
-+		DBG(23, "%s: freeing %p\n", __func__, s->netbuf);
-+		free(s->netbuf);
-+		s->netbuf = s->netptr = NULL;
-+		s->netlen = 0;
-+	}
-+
-+	return read;
-+}
-+
-+ssize_t
-+sanei_epson_net_read(Epson_Scanner *s, unsigned char *buf, ssize_t wanted,
-+		       SANE_Status * status)
-+{
-+	if (wanted < 0) {
-+		*status = SANE_STATUS_INVAL;
-+		return 0;
-+	}
-+
-+	size_t size;
-+	ssize_t read = 0;
-+	unsigned char header[12];
-+
-+	/* read from remainder of buffer */
-+	if (s->netptr) {
-+		return sanei_epson_net_read_buf(s, buf, wanted, status);
- 	}
- 
- 	/* receive net header */
--	size = sanei_epson_net_read_raw(s, header, 12, status);
--	if (size != 12) {
-+	read = sanei_epson_net_read_raw(s, header, 12, status);
-+	if (read != 12) {
- 		return 0;
- 	}
- 
-+	/* validate header */
- 	if (header[0] != 'I' || header[1] != 'S') {
- 		DBG(1, "header mismatch: %02X %02x\n", header[0], header[1]);
- 		*status = SANE_STATUS_IO_ERROR;
- 		return 0;
- 	}
- 
-+	/* parse payload size */
- 	size = be32atoh(&header[6]);
- 
--	DBG(23, "%s: wanted = %lu, available = %lu\n", __func__,
--		(u_long) wanted, (u_long) size);
--
- 	*status = SANE_STATUS_GOOD;
- 
--	if (size == wanted) {
--
--		DBG(15, "%s: full read\n", __func__);
-+	if (!s->netbuf) {
-+		DBG(15, "%s: direct read\n", __func__);
-+		DBG(23, "%s: wanted = %lu, available = %lu\n", __func__,
-+			(u_long) wanted, (u_long) size);
- 
--		read = sanei_epson_net_read_raw(s, buf, size, status);
--
--		if (s->netbuf) {
--			free(s->netbuf);
--			s->netbuf = NULL;
--			s->netlen = 0;
-+		if ((size_t) wanted > size) {
-+			wanted = size;
- 		}
- 
--		if (read < 0) {
--			return 0;
--		}
--		
--/*	} else if (wanted < size && s->netlen == size) { */
-+		read = sanei_epson_net_read_raw(s, buf, wanted, status);
- 	} else {
--		DBG(23, "%s: partial read\n", __func__);
-+		DBG(15, "%s: buffered read\n", __func__);
-+		DBG(23, "%s: bufferable = %lu, available = %lu\n", __func__,
-+			(u_long) s->netlen, (u_long) size);
- 
--		read = sanei_epson_net_read_raw(s, s->netbuf, size, status);
--		if (read != size) {
--			return 0;
-+		if (s->netlen > size) {
-+			s->netlen = size;
- 		}
- 
--		s->netlen = size - wanted;
--		s->netptr += wanted;
--		read = wanted;
--
--		DBG(23, "0,4 %02x %02x\n", s->netbuf[0], s->netbuf[4]);
--		DBG(23, "storing %lu to buffer at %p, next read at %p, %lu bytes left\n",
--			(u_long) size, s->netbuf, s->netptr, (u_long) s->netlen);
-+		/* fill buffer */
-+		read = sanei_epson_net_read_raw(s, s->netbuf, s->netlen, status);
-+		s->netptr = s->netbuf;
-+		s->netlen = (read > 0 ? read : 0);
- 
--		memcpy(buf, s->netbuf, wanted);
-+		/* copy wanted part */
-+		read = sanei_epson_net_read_buf(s, buf, wanted, status);
- 	}
- 
- 	return read;
- }
- 
--
--int
-+size_t
- sanei_epson_net_write(Epson_Scanner *s, unsigned int cmd, const unsigned char *buf,
- 			size_t buf_size, size_t reply_len, SANE_Status *status)
- {
- 	unsigned char *h1, *h2, *payload;
- 	unsigned char *packet = malloc(12 + 8 + buf_size);
- 
--	/* XXX check allocation failure */
-+	if (!packet) {
-+		*status = SANE_STATUS_NO_MEM;
-+		return 0;
-+	}
- 
- 	h1 = packet;
- 	h2 = packet + 12;
- 	payload = packet + 12 + 8;
- 
- 	if (reply_len) {
--		s->netbuf = s->netptr = malloc(reply_len);
-+		if (s->netbuf) {
-+			DBG(23, "%s, freeing %p, %ld bytes unprocessed\n",
-+				__func__, s->netbuf, (u_long) s->netlen);
-+			free(s->netbuf);
-+			s->netbuf = s->netptr = NULL;
-+			s->netlen = 0;
-+		}
-+		s->netbuf = malloc(reply_len);
-+		if (!s->netbuf) {
-+			free(packet);
-+			*status = SANE_STATUS_NO_MEM;
-+			return 0;
-+		}
- 		s->netlen = reply_len;
--		DBG(24, "allocated %lu bytes at %p\n",
--			(u_long) reply_len, s->netbuf);
-+		DBG(24, "%s: allocated %lu bytes at %p\n", __func__,
-+			(u_long) s->netlen, s->netbuf);
- 	}
- 
- 	DBG(24, "%s: cmd = %04x, buf = %p, buf_size = %lu, reply_len = %lu\n",
-diff -up sane-backends-1.0.27/backend/epson2_net.h.epsonds-issues sane-backends-1.0.27/backend/epson2_net.h
---- sane-backends-1.0.27/backend/epson2_net.h.epsonds-issues	2016-10-06 02:02:57.000000000 +0200
-+++ sane-backends-1.0.27/backend/epson2_net.h	2020-07-28 14:51:59.666593530 +0200
-@@ -4,9 +4,9 @@
- #include <sys/types.h>
- #include "../include/sane/sane.h"
- 
--extern int sanei_epson_net_read(struct Epson_Scanner *s, unsigned char *buf, ssize_t buf_size,
-+extern ssize_t sanei_epson_net_read(struct Epson_Scanner *s, unsigned char *buf, ssize_t buf_size,
- 				SANE_Status *status);
--extern int sanei_epson_net_write(struct Epson_Scanner *s, unsigned int cmd, const unsigned char *buf,
-+extern size_t sanei_epson_net_write(struct Epson_Scanner *s, unsigned int cmd, const unsigned char *buf,
- 				size_t buf_size, size_t reply_len,
- 				SANE_Status *status);
- extern SANE_Status sanei_epson_net_lock(struct Epson_Scanner *s);

SOURCES/0001-epsonds-Prevent-possible-buffer-overflow-when-readin.patch

@@ -1,72 +0,0 @@
-From b9b0173409df73e235da2aa0dae5edd21fb55967 Mon Sep 17 00:00:00 2001
-From: Olaf Meeuwissen <paddy-hack@member.fsf.org>
-Date: Mon, 27 Apr 2020 18:48:29 +0900
-Subject: [PATCH] epsonds: Prevent possible buffer overflow when reading image
- data
-
-Addresses GHSL-2020-084, re #279.
----
- backend/epsonds-cmd.c |  5 +++++
- backend/epsonds.c     | 12 +++++++-----
- backend/epsonds.h     |  1 +
- 3 files changed, 13 insertions(+), 5 deletions(-)
-
-diff --git a/backend/epsonds-cmd.c b/backend/epsonds-cmd.c
-index 9a4db3080..c182aa51a 100644
---- a/backend/epsonds-cmd.c
-+++ b/backend/epsonds-cmd.c
-@@ -876,6 +876,11 @@ esci2_img(struct epsonds_scanner *s, SANE_Int *length)
- 		return parse_status;
- 	}
- 
-+	/* more data than was accounted for in s->buf */
-+	if (more > s->bsz) {
-+		return SANE_STATUS_IO_ERROR;
-+	}
-+
- 	/* ALWAYS read image data */
- 	if (s->hw->connection == SANE_EPSONDS_NET) {
- 		epsonds_net_request_read(s, more);
-diff --git a/backend/epsonds.c b/backend/epsonds.c
-index ff5d68106..fb9694a88 100644
---- a/backend/epsonds.c
-+++ b/backend/epsonds.c
-@@ -1230,16 +1230,18 @@ sane_start(SANE_Handle handle)
- 	if (s->line_buffer == NULL)
- 		return SANE_STATUS_NO_MEM;
- 
--	/* ring buffer for front page, twice bsz */
-+	/* transfer buffer size, bsz */
- 	/* XXX read value from scanner */
--	status = eds_ring_init(&s->front, (65536 * 4) * 2);
-+	s->bsz = (65536 * 4);
-+
-+	/* ring buffer for front page */
-+	status = eds_ring_init(&s->front, s->bsz * 2);
- 	if (status != SANE_STATUS_GOOD) {
- 		return status;
- 	}
- 
--	/* transfer buffer, bsz */
--	/* XXX read value from scanner */
--	s->buf = realloc(s->buf, 65536 * 4);
-+	/* transfer buffer */
-+	s->buf = realloc(s->buf, s->bsz);
- 	if (s->buf == NULL)
- 		return SANE_STATUS_NO_MEM;
- 
-diff --git a/backend/epsonds.h b/backend/epsonds.h
-index 0427ef3b4..401b0f32c 100644
---- a/backend/epsonds.h
-+++ b/backend/epsonds.h
-@@ -160,6 +160,7 @@ struct epsonds_scanner
- 	Option_Value val[NUM_OPTIONS];
- 	SANE_Parameters params;
- 
-+	size_t bsz;		/* transfer buffer size */
- 	SANE_Byte *buf, *line_buffer;
- 	ring_buffer *current, front, back;
- 
--- 
-2.25.4
-

SOURCES/66-saned.rules

@@ -1,2 +1,2 @@
 # udev rule for saned (SANE scanning daemon) to be able to write on usb port
-ENV{libsane_matched}=="yes", RUN+="/usr/bin/setfacl -m g:saned:rw $env{DEVNAME}"
+ENV{libsane_matched}=="yes", ENV{DEVNAME}!="", RUN+="/usr/bin/setfacl -m g:saned:rw $env{DEVNAME}"

SOURCES/sane-backends-1.0.23-soname.patch

@@ -1,36 +1,18 @@
-From 031cd8dd376ed6537afd06ca5aec5e67f5da0489 Mon Sep 17 00:00:00 2001
-From: Nils Philippsen <nils@redhat.com>
-Date: Fri, 31 Aug 2012 16:14:49 +0200
-Subject: [PATCH] patch: soname
-
-Squashed commit of the following:
-
-commit 2035ced803168210a70c4946814440764e5d0186
-Author: Nils Philippsen <nils@redhat.com>
-Date:   Fri Aug 31 16:13:51 2012 +0200
-
-    don't use the same SONAME for backend libs and main lib
----
- ltmain.sh | 19 -------------------
- 1 file changed, 19 deletions(-)
-
-diff --git a/ltmain.sh b/ltmain.sh
-index f3eb4c8..17d1508 100755
---- a/ltmain.sh
-+++ b/ltmain.sh
-@@ -8101,25 +8101,6 @@ EOF
+diff -up sane-backends-1.0.28/ltmain.sh.soname sane-backends-1.0.28/ltmain.sh
+--- sane-backends-1.0.28/ltmain.sh.soname	2019-09-12 09:57:10.979802716 +0200
++++ sane-backends-1.0.28/ltmain.sh	2019-09-12 10:27:21.719895206 +0200
+@@ -9615,23 +9615,6 @@ EOF
  	  dlname=$soname
  	fi
  
--	# Local change for sane-backends: internal name for every lib
--	# is "libsane" not "libsane-backendname". So linking to each
--	# backend is possible. Also the following test was moved to this
--	# location.
 -	# If -module or -export-dynamic was specified, set the dlname
 -	if test "$module" = yes || test "$export_dynamic" = yes; then
 -	  # On all known operating systems, these are identical.
 -	  dlname="$soname"
 -	fi
+-
+-	# On sane-backends the internal name for every lib is "libsane"
+-	# not "libsane-backendname" so that linking to each backend is possible.
 -	case $host in
 -	  *mingw*)
 -	    ;;
@@ -39,11 +21,7 @@ index f3eb4c8..17d1508 100755
 -	  *)
 -	    soname=`echo $soname | sed -e "s/libsane-[A-Za-z_0-9]*/libsane/g"`
 -	esac
--	# End of local change
 -
- 	lib="$output_objdir/$realname"
+ 	lib=$output_objdir/$realname
  	linknames=
  	for link
--- 
-1.7.11.4
-

SOURCES/sane-backends-canon-lide-100.patch

@@ -1,17 +0,0 @@
-diff -up sane-backends-1.0.27/backend/genesys.c.canon-lide-100 sane-backends-1.0.27/backend/genesys.c
---- sane-backends-1.0.27/backend/genesys.c.canon-lide-100	2018-02-01 10:37:26.160044539 +0100
-+++ sane-backends-1.0.27/backend/genesys.c	2018-02-01 10:45:44.616653277 +0100
-@@ -2070,11 +2070,9 @@ genesys_white_shading_calibration (Genes
-   dev->model->cmd_set->set_lamp_power (dev, dev->calib_reg, SANE_TRUE);
-   dev->model->cmd_set->set_motor_power (dev->calib_reg, motor);
- 
--  /* if needed, go back before doin next scan, by using rewind, registers and
--   * slopes table are kept intact from previous scan */
--  if (dev->model->flags & GENESYS_FLAG_SHADING_REPARK && dev->model->cmd_set->rewind)
-+  if (dev->model->flags & GENESYS_FLAG_SHADING_REPARK)
-     {
--      status = dev->model->cmd_set->rewind (dev);
-+      status = dev->model->cmd_set->slow_back_home (dev, SANE_TRUE);
-     }
- 
-   status =

SOURCES/sane-backends-revert-samsung-patch.patch

@@ -1,406 +0,0 @@
-From 9b13d4c18b2424eaed02b72a928e9607921ec265 Mon Sep 17 00:00:00 2001
-From: Bernard Cafarelli <bernard.cafarelli@gmail.com>
-Date: Tue, 17 Apr 2018 22:43:15 +0200
-Subject: [PATCH] Revert "Color scanning for Samsung models, which support JPEG
- Lossy compression."
-
-This reverts commit 926bfade544de4a4fd5f1a8082b85a97e2443770, leaving
-the new IDs in.
-As tracked in #315876, this breaks scanning with multiple Samsung scanners
-
-Conflicts:
-	backend/xerox_mfp.c
-	backend/xerox_mfp.h
-	doc/descriptions/xerox_mfp.desc
----
- backend/Makefile.am             |   2 +-
- backend/Makefile.in             |   7 +-
- backend/xerox_mfp.c             | 193 +-------------------------------
- backend/xerox_mfp.h             |   5 -
- doc/descriptions/xerox_mfp.desc |  10 +-
- 5 files changed, 14 insertions(+), 203 deletions(-)
-
-diff --git a/backend/Makefile.am b/backend/Makefile.am
-index 18695a4a..3225b133 100644
---- a/backend/Makefile.am
-+++ b/backend/Makefile.am
-@@ -1086,7 +1086,7 @@ libxerox_mfp_la_CPPFLAGS = $(AM_CPPFLAGS) -DBACKEND_NAME=xerox_mfp
- nodist_libsane_xerox_mfp_la_SOURCES = xerox_mfp-s.c
- libsane_xerox_mfp_la_CPPFLAGS = $(AM_CPPFLAGS) -DBACKEND_NAME=xerox_mfp
- libsane_xerox_mfp_la_LDFLAGS = $(DIST_SANELIBS_LDFLAGS)
--libsane_xerox_mfp_la_LIBADD = $(COMMON_LIBS) libxerox_mfp.la ../sanei/sanei_init_debug.lo ../sanei/sanei_constrain_value.lo ../sanei/sanei_config.lo  sane_strstatus.lo @SANEI_SANEI_JPEG_LO@ $(JPEG_LIBS) ../sanei/sanei_usb.lo ../sanei/sanei_tcp.lo $(MATH_LIB) $(SOCKET_LIBS) $(USB_LIBS) $(RESMGR_LIBS)
-+libsane_xerox_mfp_la_LIBADD = $(COMMON_LIBS) libxerox_mfp.la ../sanei/sanei_init_debug.lo ../sanei/sanei_constrain_value.lo ../sanei/sanei_config.lo  sane_strstatus.lo ../sanei/sanei_usb.lo ../sanei/sanei_tcp.lo $(MATH_LIB) $(SOCKET_LIBS) $(USB_LIBS) $(RESMGR_LIBS)
- EXTRA_DIST += xerox_mfp.conf.in
- 
- libdll_preload_la_SOURCES =  dll.c
-diff --git a/backend/Makefile.in b/backend/Makefile.in
-index d1dca4a2..2643bb77 100644
---- a/backend/Makefile.in
-+++ b/backend/Makefile.in
-@@ -1430,10 +1430,9 @@ libsane_v4l_la_LINK = $(LIBTOOL) $(AM_V_lt) --tag=CC \
- libsane_xerox_mfp_la_DEPENDENCIES = $(COMMON_LIBS) libxerox_mfp.la \
- 	../sanei/sanei_init_debug.lo ../sanei/sanei_constrain_value.lo \
- 	../sanei/sanei_config.lo sane_strstatus.lo \
--	$(am__DEPENDENCIES_1) ../sanei/sanei_usb.lo \
--	../sanei/sanei_tcp.lo $(am__DEPENDENCIES_1) \
-+	../sanei/sanei_usb.lo ../sanei/sanei_tcp.lo \
- 	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
--	$(am__DEPENDENCIES_1)
-+	$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1)
- nodist_libsane_xerox_mfp_la_OBJECTS =  \
- 	libsane_xerox_mfp_la-xerox_mfp-s.lo
- libsane_xerox_mfp_la_OBJECTS = $(nodist_libsane_xerox_mfp_la_OBJECTS)
-@@ -2754,7 +2753,7 @@ libxerox_mfp_la_CPPFLAGS = $(AM_CPPFLAGS) -DBACKEND_NAME=xerox_mfp
- nodist_libsane_xerox_mfp_la_SOURCES = xerox_mfp-s.c
- libsane_xerox_mfp_la_CPPFLAGS = $(AM_CPPFLAGS) -DBACKEND_NAME=xerox_mfp
- libsane_xerox_mfp_la_LDFLAGS = $(DIST_SANELIBS_LDFLAGS)
--libsane_xerox_mfp_la_LIBADD = $(COMMON_LIBS) libxerox_mfp.la ../sanei/sanei_init_debug.lo ../sanei/sanei_constrain_value.lo ../sanei/sanei_config.lo  sane_strstatus.lo @SANEI_SANEI_JPEG_LO@ $(JPEG_LIBS) ../sanei/sanei_usb.lo ../sanei/sanei_tcp.lo $(MATH_LIB) $(SOCKET_LIBS) $(USB_LIBS) $(RESMGR_LIBS)
-+libsane_xerox_mfp_la_LIBADD = $(COMMON_LIBS) libxerox_mfp.la ../sanei/sanei_init_debug.lo ../sanei/sanei_constrain_value.lo ../sanei/sanei_config.lo  sane_strstatus.lo ../sanei/sanei_usb.lo ../sanei/sanei_tcp.lo $(MATH_LIB) $(SOCKET_LIBS) $(USB_LIBS) $(RESMGR_LIBS)
- libdll_preload_la_SOURCES = dll.c
- libdll_preload_la_CPPFLAGS = $(AM_CPPFLAGS) -DBACKEND_NAME=dll -DENABLE_PRELOAD
- libdll_la_SOURCES = dll.c
-diff --git a/backend/xerox_mfp.c b/backend/xerox_mfp.c
-index 8b8c8956..d37a6237 100644
---- a/backend/xerox_mfp.c
-+++ b/backend/xerox_mfp.c
-@@ -33,9 +33,6 @@
- #include "../include/sane/sanei_usb.h"
- #include "../include/sane/sanei_config.h"
- #include "../include/sane/sanei_backend.h"
--#ifdef HAVE_LIBJPEG
--#include <jpeglib.h>
--#endif
- #include "xerox_mfp.h"
- 
- #define BACKEND_BUILD 13
-@@ -93,128 +90,6 @@ static char *str_cmd(int cmd)
- }
- 
- #define MAX_DUMP 70
--const char *encTmpFileName = "/tmp/stmp_enc.tmp";
--
--static int decompress(struct device __sane_unused__ *dev,
--                      const char __sane_unused__ *infilename)
--{
--#ifdef HAVE_LIBJPEG
--    int rc;
--    int row_stride, width, height, pixel_size;
--    struct jpeg_decompress_struct cinfo;
--    struct jpeg_error_mgr jerr;
--    unsigned long bmp_size = 0;
--    FILE *pInfile = NULL;
--    JSAMPARRAY buffer;
--
--    if ((pInfile = fopen(infilename, "rb")) == NULL) {
--        fprintf(stderr, "can't open %s\n", infilename);
--        return -1;
--    }
--
--    cinfo.err = jpeg_std_error(&jerr);
--
--    jpeg_create_decompress(&cinfo);
--
--    jpeg_stdio_src(&cinfo, pInfile);
--
--    rc = jpeg_read_header(&cinfo, TRUE);
--    if (rc != 1) {
--        jpeg_destroy_decompress(&cinfo);
--        fclose(pInfile);
--        return -1;
--    }
--
--    jpeg_start_decompress(&cinfo);
--
--    width = cinfo.output_width;
--    height = cinfo.output_height;
--    pixel_size = cinfo.output_components;
--    bmp_size = width * height * pixel_size;
--    dev->decDataSize = bmp_size;
--
--    row_stride = width * pixel_size;
--
--    buffer = (*cinfo.mem->alloc_sarray)
--             ((j_common_ptr) &cinfo, JPOOL_IMAGE, row_stride, 1);
--
--    while (cinfo.output_scanline < cinfo.output_height) {
--        buffer[0] = dev->decData + \
--                    (cinfo.output_scanline) * row_stride;
--        jpeg_read_scanlines(&cinfo, buffer, 1);
--    }
--    jpeg_finish_decompress(&cinfo);
--    jpeg_destroy_decompress(&cinfo);
--    fclose(pInfile);
--    return 0;
--#else
--    return -1;
--#endif
--}
--
--static int copy_decompress_data(struct device *dev, unsigned char *pDest, int maxlen, int *destLen)
--{
--    int data_size = 0;
--    size_t result = 0, retVal = 0;
--
--
--    if (0 == dev->decDataSize) {
--        *destLen = 0;
--        return retVal;
--    }
--    data_size = dev->decDataSize - dev->currentDecDataIndex;
--    if (data_size > maxlen) {
--        data_size = maxlen;
--    }
--    memcpy(pDest, dev->decData+dev->currentDecDataIndex, data_size);
--    result = data_size;
--    *destLen = result;
--    dev->currentDecDataIndex += result;
--    retVal = result;
--
--    if (dev->decDataSize == dev->currentDecDataIndex) {
--        dev->currentDecDataIndex = 0;
--        dev->decDataSize = 0;
--    }
--
--    return retVal;
--}
--
--static int decompress_tempfile(struct device *dev)
--{
--    decompress(dev, encTmpFileName);
--    remove(encTmpFileName);
--    return 0;
--}
--
--static int dump_to_tmp_file(struct device *dev)
--{
--    unsigned char *pSrc = dev->data;
--    int srcLen = dev->datalen;
--    FILE *pInfile;
--    if ((pInfile = fopen(encTmpFileName, "a")) == NULL) {
--        fprintf(stderr, "can't open %s\n", encTmpFileName);
--        return 0;
--    }
--
--    fwrite(pSrc, 1, srcLen, pInfile);
--    fclose(pInfile);
--    return srcLen;
--}
--
--static int isSupportedDevice(struct device __sane_unused__ *dev)
--{
--#ifdef HAVE_LIBJPEG
--    /* Checking device which supports JPEG Lossy compression for color scanning*/
--    if (dev->compressionTypes & (1 << 6))
--        return 1;
--    else
--        return 0;
--#else
--    return 0;
--#endif
--}
--
- static void dbg_dump(struct device *dev)
- {
-     int i;
-@@ -639,11 +514,9 @@ static void set_parameters(struct device *dev)
-     dev->para.pixels_per_line = dev->win_width / px_to_len;
-     dev->para.bytes_per_line = dev->para.pixels_per_line;
- 
--    if (!isSupportedDevice(dev)) {
- #if BETTER_BASEDPI
--        px_to_len = 1213.9 / dev->val[OPT_RESOLUTION].w;
-+	px_to_len = 1213.9 / dev->val[OPT_RESOLUTION].w;
- #endif
--    }
-     dev->para.lines = dev->win_len / px_to_len;
-     if (dev->composition == MODE_LINEART ||
-         dev->composition == MODE_HALFTONE) {
-@@ -765,13 +638,6 @@ static int dev_set_window(struct device *dev)
-     cmd[0x11] = (SANE_Byte)floor(dev->win_off_y);
-     cmd[0x12] = (SANE_Byte)((dev->win_off_y - floor(dev->win_off_y)) * 100);
-     cmd[0x13] = dev->composition;
--    /* Set to JPEG Lossy Compression, if mode is color (only for supported model)...
--     * else go with Uncompressed (For backard compatibility with old models )*/
--    if (dev->composition == MODE_RGB24) {
--        if (isSupportedDevice(dev)) {
--            cmd[0x14] = 0x6;
--        }
--    }
-     cmd[0x16] = dev->threshold;
-     cmd[0x17] = dev->doc_source;
- 
-@@ -843,7 +709,6 @@ dev_inquiry(struct device *dev)
-                       dev->res[0x3e] << 8 |
-                       dev->res[0x3f];
-     dev->line_order = dev->res[0x31];
--    dev->compressionTypes = dev->res[0x32];
-     dev->doc_loaded = (dev->res[0x35] == 0x02) &&
-                       (dev->res[0x26] & 0x03);
- 
-@@ -942,10 +807,6 @@ dev_free(struct device *dev)
-         free(UNCONST(dev->sane.type));
-     if (dev->data)
-         free(dev->data);
--    if (dev->decData) {
--        free(dev->decData);
--        dev->decData = NULL;
--    }
-     memset(dev, 0, sizeof(*dev));
-     free(dev);
- }
-@@ -1283,19 +1144,6 @@ sane_read(SANE_Handle h, SANE_Byte *buf, SANE_Int maxlen, SANE_Int *lenp)
-     /* if there is no data to read or output from buffer */
-     if (!dev->blocklen && dev->datalen <= PADDING_SIZE) {
- 
--        /* copying uncompressed data */
--        if (dev->composition == MODE_RGB24 &&
--            isSupportedDevice(dev) &&
--            dev->decDataSize > 0) {
--            int diff = dev->total_img_size - dev->total_out_size;
--            int bufLen = (diff < maxlen) ? diff : maxlen;
--            if (0 < diff &&
--                0 < copy_decompress_data(dev, buf, bufLen, lenp)) {
--                dev->total_out_size += *lenp;
--                return SANE_STATUS_GOOD;
--            }
--        }
--
-         /* and we don't need to acquire next block */
-         if (dev->final_block) {
-             int slack = dev->total_img_size - dev->total_out_size;
-@@ -1311,10 +1159,7 @@ sane_read(SANE_Handle h, SANE_Byte *buf, SANE_Int maxlen, SANE_Int *lenp)
-                 /* this will never happen */
-                 DBG(1, "image overflow %d bytes\n", dev->total_img_size - dev->total_out_size);
-             }
--            if (isSupportedDevice(dev) &&
--                dev->composition == MODE_RGB24) {
--                remove(encTmpFileName);
--            }
-+
-             /* that's all */
-             dev_stop(dev);
-             return SANE_STATUS_EOF;
-@@ -1365,18 +1210,9 @@ sane_read(SANE_Handle h, SANE_Byte *buf, SANE_Int maxlen, SANE_Int *lenp)
- 
-         if (buf && lenp) { /* read mode */
-             /* copy will do minimal of valid data */
--            if (dev->para.format == SANE_FRAME_RGB && dev->line_order) {
--                if (isSupportedDevice(dev)) {
--                    clrlen = dump_to_tmp_file(dev);
--                    /* decompress after reading entire block data*/
--                    if (0 == dev->blocklen) {
--                        decompress_tempfile(dev);
--                    }
--                    copy_decompress_data(dev, buf, maxlen, &olen);
--                } else {
--                    clrlen = copy_mix_bands_trim(dev, buf, maxlen, &olen);
--                }
--            } else
-+            if (dev->para.format == SANE_FRAME_RGB && dev->line_order)
-+				clrlen = copy_mix_bands_trim(dev, buf, maxlen, &olen);
-+            else
-                 clrlen = copy_plain_trim(dev, buf, maxlen, &olen);
- 
-             dev->datalen -= clrlen;
-@@ -1455,9 +1291,6 @@ sane_start(SANE_Handle h)
-     if (!dev->data && !(dev->data = malloc(DATASIZE)))
-         return ret_cancel(dev, SANE_STATUS_NO_MEM);
- 
--    if (!dev->decData && !(dev->decData = malloc(POST_DATASIZE)))
--        return ret_cancel(dev, SANE_STATUS_NO_MEM);
--
-     if (!dev_acquire(dev))
-         return dev->state;
- 
-@@ -1479,22 +1312,6 @@ sane_start(SANE_Handle h)
- 
-     dev->total_img_size = dev->para.bytes_per_line * dev->para.lines;
- 
--    if (isSupportedDevice(dev) &&
--        dev->composition == MODE_RGB24) {
--	int fd;
--        remove(encTmpFileName);
--
--	/* Precreate temporary file in exclusive mode. */
--	fd = open(encTmpFileName, O_CREAT|O_EXCL, 0600);
--	if (fd == -1) {
--	    DBG(3, "%s: %p, can't create temporary file %s: %s\n", __func__,
--		(void *)dev, encTmpFileName, strerror(errno));
--	    return ret_cancel(dev, SANE_STATUS_ACCESS_DENIED);
--	}
--	close(fd);
--    }
--    dev->currentDecDataIndex = 0;
--
-     return SANE_STATUS_GOOD;
- }
- 
-diff --git a/backend/xerox_mfp.h b/backend/xerox_mfp.h
-index 3d93f06d..ea89dda2 100644
---- a/backend/xerox_mfp.h
-+++ b/backend/xerox_mfp.h
-@@ -74,10 +74,6 @@ struct device {
- #define DATATAIL(dev) ((dev->dataoff + dev->datalen) & DATAMASK)
- #define DATAROOM(dev) dataroom(dev)
- 
--#define POST_DATASIZE 0xFFFFFF
--    SANE_Byte *decData;
--    int decDataSize;
--    int currentDecDataIndex;
-     /* data from CMD_INQUIRY: */
-     int resolutions;		/* supported resolution bitmask */
-     int compositions;		/* supported image compositions bitmask */
-@@ -102,7 +98,6 @@ struct device {
-     int composition;		/* MODE_ */
-     int doc_source;		/* document source */
-     int threshold;		/* brightness */
--    int compressionTypes;
- 
-     /* CMD_READ data. It is per block only, image could be in many blocks */
-     int blocklen;			/* image data block len (padding incl.) */
-diff --git a/doc/descriptions/xerox_mfp.desc b/doc/descriptions/xerox_mfp.desc
-index d21a6be6..67253b38 100644
---- a/doc/descriptions/xerox_mfp.desc
-+++ b/doc/descriptions/xerox_mfp.desc
-@@ -320,7 +320,7 @@
- 
- :model "SCX-3405W"
- :interface "Ethernet"
--:status :good
-+:status :basic
- 
- :model "SCX-3400"
- :interface "USB"
-@@ -335,17 +335,17 @@
- :model "SCX-4729FD"
- :interface "USB"
- :usbid "0x04e8" "0x3453"
--:status :good
-+:status :basic
- 
- :model "CLX-6260"
- :interface "USB"
- :usbid "0x04e8" "0x3455"
--:status :good
-+:status :minimal
- 
- :model "CLX-3300 Series"
- :interface "USB"
- :usbid "0x04e8" "0x3456"
--:status :good
-+:status :basic
- 
- :model "SCX-470x"
- :interface "USB"
-@@ -355,7 +355,7 @@
- :model "CLX-4190"
- :interface "USB"
- :usbid "0x04e8" "0x345a"
--:status :good
-+:status :minimal
- 
- :model "SCX-4650 4x21S Series"
- :interface "USB"
--- 
-2.17.0
-

SOURCES/sane-backends-saned-manpage.patch

@@ -1,28 +0,0 @@
-diff -up sane-backends-1.0.27/doc/saned.man.saned-manpage sane-backends-1.0.27/doc/saned.man
---- sane-backends-1.0.27/doc/saned.man.saned-manpage	2017-11-27 12:42:05.077326419 +0100
-+++ sane-backends-1.0.27/doc/saned.man	2017-11-27 12:43:21.169769553 +0100
-@@ -223,8 +223,22 @@ installed on the system. this is the pre
- Saned can be used wih systemd without the systemd integration 
- compiled in, but then logging of debug information is not supported. 
- 
--The systemd configuration is different for the 2 options, so
--both are described below.
-+The systemd configuration is different for the 2 options, but you need
-+to create unit files in both options and then run as root:
-+.PP
-+.RS
-+systemctl start saned.socket
-+.RE
-+.PP
-+to start saned. If you want to have saned.socket running after startup, run as
-+root: 
-+.PP
-+.RS
-+systemctl enable saned.socket
-+.RE
-+.PP
-+
-+The systemd configuration of both options is described below.
- .SH Systemd configuration for saned with systemd support compiled in
- for the systemd configuration we need to add 2 configuration files in
- .I /etc/systemd/system.

SOURCES/sane-backends.sysusers

@@ -0,0 +1 @@
+u saned - "SANE scanner daemon user" /usr/share/sane /sbin/nologin

SOURCES/sane-epson2-disable-focus.patch

@@ -0,0 +1,36 @@
+diff --git a/backend/epson2-ops.c b/backend/epson2-ops.c
+index 83a0169..573ebcf 100644
+--- a/backend/epson2-ops.c
++++ b/backend/epson2-ops.c
+@@ -291,14 +291,14 @@ e2_dev_post_init(struct Epson_Device *dev)
+ 	dev->need_reset_on_source_change = SANE_FALSE;
+ 
+ 	if (e2_dev_model(dev, "ES-9000H") || e2_dev_model(dev, "GT-30000")) {
+-		dev->cmd->set_focus_position = 0;
+ 		dev->cmd->feed = 0x19;
++		dev->focusSupport = SANE_FALSE;
+ 	}
+ 
+ 	if (e2_dev_model(dev, "GT-8200") || e2_dev_model(dev, "Perfection1650")
+ 	    || e2_dev_model(dev, "Perfection1640") || e2_dev_model(dev, "GT-8700")) {
+ 		dev->cmd->feed = 0;
+-		dev->cmd->set_focus_position = 0;
++		dev->focusSupport = SANE_FALSE;
+ 		dev->need_reset_on_source_change = SANE_TRUE;
+ 	}
+ 
+@@ -825,12 +825,12 @@ e2_discover_capabilities(Epson_Scanner *s)
+ 
+ 	if (esci_request_focus_position(s, &s->currentFocusPosition) ==
+ 	    SANE_STATUS_GOOD) {
+-		DBG(1, "setting focus is supported, current focus: %u\n", s->currentFocusPosition);
++		DBG(1, "getting focus is supported, current focus: %u\n", s->currentFocusPosition);
+ 		dev->focusSupport = SANE_TRUE;
+ 		s->opt[OPT_FOCUS_POS].cap &= ~SANE_CAP_INACTIVE;
+ 		s->val[OPT_FOCUS_POS].w = s->currentFocusPosition;
+ 	} else {
+-		DBG(1, "setting focus is not supported\n");
++		DBG(1, "getting focus is not supported\n");
+ 		dev->focusSupport = SANE_FALSE;
+ 		s->opt[OPT_FOCUS_POS].cap |= SANE_CAP_INACTIVE;
+ 		s->val[OPT_FOCUS_POS].w = FOCUS_ON_GLASS;	/* just in case */

SPECS/sane-backends.spec

@@ -1,50 +1,33 @@
 # let -devel require drivers to make them available as multilib
 %global needs_multilib_quirk 1
 
-%if !0%{?fedora}%{?rhel} || 0%{?fedora} >= 16 || 0%{?rhel} >= 7
 %global _hardened_build 1
-%endif
 
-%if !0%{?fedora}%{?rhel} || 0%{?fedora} >= 17 || 0%{?rhel} >= 7
-%global udevdir %{_prefix}/lib/udev
-%else
-%global udevdir /lib/udev
-%endif
-%global udevrulesdir %{udevdir}/rules.d
-%global udevhwdbdir %{udevdir}/hwdb.d
-
-%if !0%{?fedora}%{?rhel} || 0%{?fedora} >= 18 || 0%{?rhel} >= 7
 %global libusb1 1
-%else
-%global libusb1 0
-%endif
 
 %global __provides_exclude_from ^%{_libdir}/sane/.*\.so.*$
 %global __requires_exclude ^libsane-.*\.so\.[0-9]*(\(\).*)?+$
 
-%if ! 0%{?fedora}%{?rhel} || 0%{?fedora} >= 20 || 0%{?rhel} >= 8
 %global _maindocdir %{_docdir}/%{name}
 %global _docdocdir %{_docdir}/%{name}-doc
-%else
-%global _maindocdir %{_docdir}/%{name}-%{version}
-%global _docdocdir %{_docdir}/%{name}-doc-%{version}
-%endif
 
 Summary: Scanner access software
 Name: sane-backends
-Version: 1.0.27
-Release: 22%{?dist}
+Version: 1.0.32
+Release: 7%{?dist}
 # lib/ is LGPLv2+, backends are GPLv2+ with exceptions
 # Tools are GPLv2+, docs are public domain
 # see LICENSE for details
 License: GPLv2+ and GPLv2+ with exceptions and Public Domain and IJG and LGPLv2+ and MIT
-# Alioth Download URLs are amazing.
-Source0: https://gitlab.com/sane-project/backends/uploads/a3ba9fff29253a94e84074917bff581a/%{name}-%{version}.tar.gz
+# GitLab Download URLs are amazing. But the source code link has different name and doesnt have generated autotools stuff
+Source0: https://gitlab.com/sane-project/backends/uploads/104f09c07d35519cc8e72e604f11643f/%{name}-%{version}.tar.gz
+
 Source1: sane.png
 Source2: saned.socket
 Source3: saned@.service.in
 Source4: README.Fedora
 Source5: 66-saned.rules
+Source6: sane-backends.sysusers
 
 # Fedora-specific, probably not generally applicable:
 Patch0: sane-backends-1.0.25-udev.patch
@@ -53,50 +36,49 @@ Patch0: sane-backends-1.0.25-udev.patch
 Patch1: sane-backends-1.0.23-soname.patch
 # Fedora-specific (for now): make installed sane-config multi-lib aware again
 Patch2: sane-backends-1.0.23-sane-config-multilib.patch
-# saned manpage incomplete and exists when saned is not installed (#1515762)
-Patch3: sane-backends-saned-manpage.patch
-# Black vertical band in color and gray images with Canon LIDE 100 scanner (bug #1540370)
-Patch4: sane-backends-canon-lide-100.patch
-# Revert samsung patch from upstream (upstream tracker https://alioth.debian.org/tracker/index.php?func=detail&aid=315876&group_id=30186&atid=410366)
-Patch5: sane-backends-revert-samsung-patch.patch
-# 1852468, 1852467, 1852466, 1852465 - prevent buffer overflow in esci2_img
-Patch6: 0001-epsonds-Prevent-possible-buffer-overflow-when-readin.patch
-# 1852663, 1848097 - NULL pointer dereference in sanei_epson_net_read function
-Patch7: 0001-epson2-Rewrite-network-I-O.patch
+# 1934308 - Several Epson devices cannot scan because they fail to set focus
+Patch3: sane-epson2-disable-focus.patch
 
 URL: http://www.sane-project.org
 
+BuildRequires: gettext
 # gcc is no longer in buildroot by default
 BuildRequires: gcc
-
+# genesys backend is not written in C++, so it is needed as buildrequire
+BuildRequires: gcc-c++
+BuildRequires: gphoto2-devel
 BuildRequires: %{_bindir}/latex
+BuildRequires: libieee1284-devel
+BuildRequires: libjpeg-devel
+BuildRequires: libpng-devel
+BuildRequires: libtiff-devel
 %if %libusb1
 BuildRequires: libusbx-devel
 %else
 BuildRequires: libusb-devel
 %endif
-BuildRequires: libieee1284-devel
-BuildRequires: libjpeg-devel
-BuildRequires: libpng-devel
-BuildRequires: libtiff-devel
 BuildRequires: libv4l-devel
-BuildRequires: gettext
-BuildRequires: gphoto2-devel
+# uses make
+BuildRequires: make
+# pixma backend generates header files during build via python script
+BuildRequires: python3
 BuildRequires: systemd-devel
 BuildRequires: systemd
+# needed by macros in rpm scriptlets
+BuildRequires: systemd-rpm-macros
+
 Requires: libpng
+%if 0%{?fedora} >= 32 || 0%{?rhel} > 8
+Requires: sane-airscan
+%endif
+Requires: sane-backends-libs%{?_isa} = %{?epoch:%{epoch}:}%{version}-%{release}
 Requires: systemd >= 196
 Requires: systemd-udev >= 196
-Requires: sane-backends-libs%{?_isa} = %{?epoch:%{epoch}:}%{version}-%{release}
-# Don't drag around obsoletes forever
-%if ! (0%{?fedora} >= 27 || 0%{?rhel} >= 8)
-Obsoletes: sane-backends < 1.0.25-3
-Conflicts: sane-backends < 1.0.25-3
-%endif
 
-# fix for 1852668, 1852667, 1852666, 1852665 - autodiscovery is not supported in epsonds
-# backend, so disable it during post scriptlet (grep and sed are needed for the scriptlet)
-Requires: grep, sed
+# workaround for Brother scanners, which drivers are built with old libnsl
+# it is ignored by DNF, but it seems GUI installation apps should offer it
+# if it is not installed, it leads to crashes like #1778425
+Suggests: libnsl
 
 %description
 Scanner Access Now Easy (SANE) is a universal scanner interface.  The
@@ -108,10 +90,6 @@ hand-held scanner, video and still cameras, frame-grabbers, etc.).
 Summary: SANE backends documentation
 BuildArch: noarch
 # Don't drag around obsoletes forever
-%if 0%{?fedora}%{?rhel} && (0%{?fedora} < 25 || 0%{?rhel} <= 8)
-Obsoletes: sane-backends < 1.0.23-10
-Conflicts: sane-backends < 1.0.23-10
-%endif
 
 %description doc
 This package contains documentation for SANE backends.
@@ -127,21 +105,21 @@ want to access scanners.
 
 %package devel
 Summary: SANE development toolkit
-Requires: sane-backends = %{?epoch:%{epoch}:}%{version}-%{release}
-Requires: sane-backends-libs%{?_isa} = %{?epoch:%{epoch}:}%{version}-%{release}
-%if %needs_multilib_quirk
-Requires: sane-backends-drivers-scanners%{?_isa} = %{?epoch:%{epoch}:}%{version}-%{release}
-Requires: sane-backends-drivers-cameras%{?_isa} = %{?epoch:%{epoch}:}%{version}-%{release}
-%endif
+Requires: libieee1284-devel
+Requires: libjpeg-devel
+Requires: libtiff-devel
 %if %libusb1
 Requires: libusbx-devel
 %else
 Requires: libusb-devel
 %endif
-Requires: libieee1284-devel
-Requires: libjpeg-devel
-Requires: libtiff-devel
 Requires: pkgconfig
+Requires: sane-backends = %{?epoch:%{epoch}:}%{version}-%{release}
+%if %needs_multilib_quirk
+Requires: sane-backends-drivers-scanners%{?_isa} = %{?epoch:%{epoch}:}%{version}-%{release}
+Requires: sane-backends-drivers-cameras%{?_isa} = %{?epoch:%{epoch}:}%{version}-%{release}
+%endif
+Requires: sane-backends-libs%{?_isa} = %{?epoch:%{epoch}:}%{version}-%{release}
 
 %description devel
 This package contains libraries and header files for writing Scanner Access Now
@@ -149,15 +127,10 @@ Easy (SANE) modules.
 
 %package drivers-scanners
 Summary: SANE backend drivers for scanners
+# pixma backend now requires libxml2
+BuildRequires: libxml2-devel
 Requires: sane-backends = %{?epoch:%{epoch}:}%{version}-%{release}
 Requires: sane-backends-libs%{?_isa} = %{?epoch:%{epoch}:}%{version}-%{release}
-# Don't drag around obsoletes forever
-%if 0%{?rhel} && 0%{?rhel} < 8
-Obsoletes: sane-backends < 1.0.22-4
-Obsoletes: sane-backends-libs < 1.0.22-4
-Conflicts: sane-backends < 1.0.22-4
-Conflicts: sane-backends-libs < 1.0.22-4
-%endif
 
 %description drivers-scanners
 This package contains backend drivers to access scanner hardware through SANE.
@@ -166,13 +139,6 @@ This package contains backend drivers to access scanner hardware through SANE.
 Summary: Scanner backend drivers for digital cameras
 Requires: sane-backends = %{?epoch:%{epoch}:}%{version}-%{release}
 Requires: sane-backends-libs%{?_isa} = %{?epoch:%{epoch}:}%{version}-%{release}
-# Don't drag around obsoletes forever
-%if 0%{?rhel} && 0%{?rhel} < 8
-Obsoletes: sane-backends-libs-gphoto2 < 1.0.22-4
-Conflicts: sane-backends-libs-gphoto2 < 1.0.22-4
-Provides: sane-libs-gphoto2 = %{?epoch:%{epoch}:}%{version}-%{release}
-Provides: sane-libs-gphoto2%{?_isa} = %{?epoch:%{epoch}:}%{version}-%{release}
-%endif
 
 %description drivers-cameras
 This package contains backend drivers to access digital cameras through SANE.
@@ -181,13 +147,6 @@ This package contains backend drivers to access digital cameras through SANE.
 Summary: Scanner network daemon
 Requires: sane-backends = %{?epoch:%{epoch}:}%{version}-%{release}
 Requires: sane-backends-libs%{?_isa} = %{?epoch:%{epoch}:}%{version}-%{release}
-Requires(pre): shadow-utils
-%{?systemd_requires}
-# Split off saned from 1.0.25-3 on, don't drag around obsoletes forever
-%if ! (0%{?fedora} >= 27 || 0%{?rhel} >= 8)
-Obsoletes: sane-backends < 1.0.25-3
-Conflicts: sane-backends < 1.0.25-3
-%endif
 
 %description daemon
 This package contains saned which is the daemon that allows remote clients to
@@ -199,11 +158,7 @@ access image acquisition devices available on the local host.
 %patch0 -p1 -b .udev
 %patch1 -p1 -b .soname
 %patch2 -p1 -b .sane-config-multilib
-%patch3 -p1 -b .saned-manpage
-%patch4 -p1 -b .canon-lide-100
-%patch5 -p1 -b .revert-samsung-patch
-%patch6 -p1 -b .prevent-buffer-overflow
-%patch7 -p1 -b .rework-epsonds-io
+%patch3 -p1 -b .disable-focus
 
 %build
 CFLAGS="%optflags -fno-strict-aliasing"
@@ -222,7 +177,7 @@ LDFLAGS="-pie"
     --with-usb \
 %endif
     --enable-pthread
-make %{?_smp_mflags}
+%make_build
 
 # Write udev/hwdb files
 _topdir="$PWD"
@@ -233,7 +188,9 @@ pushd tools
 popd
 
 %install
-make DESTDIR="%{buildroot}" install
+%make_install
+
+install -p -D -m 0644 %{SOURCE6} %{buildroot}%{_sysusersdir}/sane-backends.conf
 
 mkdir -p %{buildroot}%{_datadir}/pixmaps
 install -m 644 %{SOURCE1} %{buildroot}%{_datadir}/pixmaps
@@ -242,11 +199,11 @@ rm -f %{buildroot}%{_mandir}/man1/gamma4scanimage.1*
 rm -f %{buildroot}%{_libdir}/sane/*.a %{buildroot}%{_libdir}/*.a
 rm -f %{buildroot}%{_libdir}/libsane*.la %{buildroot}%{_libdir}/sane/*.la
 
-mkdir -p %{buildroot}%{udevrulesdir}
-mkdir -p %{buildroot}%{udevhwdbdir}
-install -m 0644 tools/udev/sane-backends.rules %{buildroot}%{udevrulesdir}/65-sane-backends.rules
-install -m 0644 tools/udev/sane-backends.hwdb %{buildroot}%{udevhwdbdir}/20-sane-backends.hwdb
-install -m 0644 %{SOURCE5} %{buildroot}%{udevrulesdir}/66-saned.rules
+mkdir -p %{buildroot}%{_udevrulesdir}
+mkdir -p %{buildroot}%{_udevhwdbdir}
+install -m 0644 tools/udev/sane-backends.rules %{buildroot}%{_udevrulesdir}/65-sane-backends.rules
+install -m 0644 tools/udev/sane-backends.hwdb %{buildroot}%{_udevhwdbdir}/20-sane-backends.hwdb
+install -m 0644 %{SOURCE5} %{buildroot}%{_udevrulesdir}/66-saned.rules
 
 mkdir -p %{buildroot}%{_libdir}/pkgconfig
 install -m 0644 tools/sane-backends.pc %{buildroot}%{_libdir}/pkgconfig/
@@ -278,6 +235,10 @@ install -m 644 %{SOURCE2} %{buildroot}%{_unitdir}
 sed 's|@CONFIGDIR@|%{_sysconfdir}/sane.d|g' < %{SOURCE3} > saned@.service
 install -m 644 saned@.service %{buildroot}%{_unitdir}
 
+%ifarch armv7hl
+rm -f %{buildroot}%{_libdir}/sane/libsane-qcam.so
+%endif
+
 %find_lang %name
 
 %post
@@ -297,11 +258,7 @@ udevadm hwdb --update >/dev/null 2>&1 || :
 %ldconfig_scriptlets libs
 
 %pre daemon
-getent group saned >/dev/null || groupadd -r saned
-getent passwd saned >/dev/null || \
-    useradd -r -g saned -d %{_datadir}/sane -s /sbin/nologin \
-		-c "SANE scanner daemon user" saned
-exit 0
+%sysusers_create_compat %{SOURCE6}
 
 %post daemon
 %systemd_post saned.socket
@@ -310,7 +267,7 @@ exit 0
 %systemd_preun saned.socket
 
 %postun daemon
-%systemd_postun saned.socket
+%systemd_postun_with_restart saned.socket
 
 %files -f %{name}.lang
 %dir %{_maindocdir}
@@ -324,8 +281,8 @@ exit 0
 %dir /etc/sane.d
 %dir /etc/sane.d/dll.d
 %config(noreplace) /etc/sane.d/*.conf
-%{udevrulesdir}/65-sane-backends.rules
-%{udevhwdbdir}/20-sane-backends.hwdb
+%{_udevrulesdir}/65-sane-backends.rules
+%{_udevhwdbdir}/20-sane-backends.hwdb
 %{_datadir}/pixmaps/sane.png
 
 %{_bindir}/sane-find-scanner
@@ -344,7 +301,7 @@ exit 0
 
 %files libs
 %{_libdir}/libsane.so.1
-%{_libdir}/libsane.so.1.0.27
+%{_libdir}/libsane.so.1.0.32
 
 %files devel
 %{_bindir}/sane-config
@@ -354,41 +311,252 @@ exit 0
 %{_libdir}/pkgconfig/sane-backends.pc
 
 %files drivers-scanners
-%{_libdir}/sane/*.so
+# we need to specify all .so files for available backends because something like
+# #1761145 can happen - genesys did not compile because of lack gcc-c++ in buildroot
+# and configure printed only warning. So now we can figure out missing backend support
+# during build
+%{_libdir}/sane/libsane-abaton.so
+%{_libdir}/sane/libsane-agfafocus.so
+%{_libdir}/sane/libsane-apple.so
+%{_libdir}/sane/libsane-artec.so
+%{_libdir}/sane/libsane-artec_eplus48u.so
+%{_libdir}/sane/libsane-as6e.so
+%{_libdir}/sane/libsane-avision.so
+%{_libdir}/sane/libsane-bh.so
+%{_libdir}/sane/libsane-canon.so
+%{_libdir}/sane/libsane-canon630u.so
+%{_libdir}/sane/libsane-canon_dr.so
+%{_libdir}/sane/libsane-canon_lide70.so
+%{_libdir}/sane/libsane-canon_pp.so
+%{_libdir}/sane/libsane-cardscan.so
+%{_libdir}/sane/libsane-coolscan.so
+%{_libdir}/sane/libsane-coolscan2.so
+%{_libdir}/sane/libsane-coolscan3.so
+%{_libdir}/sane/libsane-dc210.so
+%{_libdir}/sane/libsane-dc240.so
+%{_libdir}/sane/libsane-dc25.so
+%{_libdir}/sane/libsane-dell1600n_net.so
+%{_libdir}/sane/libsane-dll.so
+%{_libdir}/sane/libsane-dmc.so
+%{_libdir}/sane/libsane-epjitsu.so
+%{_libdir}/sane/libsane-epson.so
+%{_libdir}/sane/libsane-epson2.so
+%{_libdir}/sane/libsane-epsonds.so
+%{_libdir}/sane/libsane-fujitsu.so
+%{_libdir}/sane/libsane-genesys.so
+%{_libdir}/sane/libsane-gt68xx.so
+%{_libdir}/sane/libsane-hp.so
+%{_libdir}/sane/libsane-hp3500.so
+%{_libdir}/sane/libsane-hp3900.so
+%{_libdir}/sane/libsane-hp4200.so
+%{_libdir}/sane/libsane-hp5400.so
+%{_libdir}/sane/libsane-hp5590.so
+%{_libdir}/sane/libsane-hpljm1005.so
+%{_libdir}/sane/libsane-hpsj5s.so
+%{_libdir}/sane/libsane-hs2p.so
+%{_libdir}/sane/libsane-ibm.so
+%{_libdir}/sane/libsane-kodak.so
+%{_libdir}/sane/libsane-kodakaio.so
+%{_libdir}/sane/libsane-kvs1025.so
+%{_libdir}/sane/libsane-kvs20xx.so
+%{_libdir}/sane/libsane-kvs40xx.so
+%{_libdir}/sane/libsane-leo.so
+%{_libdir}/sane/libsane-lexmark.so
+%{_libdir}/sane/libsane-ma1509.so
+%{_libdir}/sane/libsane-magicolor.so
+%{_libdir}/sane/libsane-matsushita.so
+%{_libdir}/sane/libsane-microtek.so
+%{_libdir}/sane/libsane-microtek2.so
+%{_libdir}/sane/libsane-mustek.so
+%{_libdir}/sane/libsane-mustek_pp.so
+%{_libdir}/sane/libsane-mustek_usb.so
+%{_libdir}/sane/libsane-mustek_usb2.so
+%{_libdir}/sane/libsane-nec.so
+%{_libdir}/sane/libsane-net.so
+%{_libdir}/sane/libsane-niash.so
+%{_libdir}/sane/libsane-p5.so
+%{_libdir}/sane/libsane-pie.so
+%{_libdir}/sane/libsane-pieusb.so
+%{_libdir}/sane/libsane-pixma.so
+%{_libdir}/sane/libsane-plustek.so
+%{_libdir}/sane/libsane-plustek_pp.so
+# qcam is not on aarch64, ppc64le and s390x. SANE needs
+# ioperm, inb and outb functions or portaccess function
+# to support qcam backend. Those functions are only in
+# armv7hl (until F30), i686 and x86_64 architectures.
+# Because qcam is missing on some archs and releases,
+# I'll leave here a wildcard record
+%ifarch x86_64 i686
+%{_libdir}/sane/libsane-qcam.so
+%endif
+%{_libdir}/sane/libsane-ricoh.so
+%{_libdir}/sane/libsane-ricoh2.so
+%{_libdir}/sane/libsane-rts8891.so
+%{_libdir}/sane/libsane-s9036.so
+%{_libdir}/sane/libsane-sceptre.so
+%{_libdir}/sane/libsane-sharp.so
+%{_libdir}/sane/libsane-sm3600.so
+%{_libdir}/sane/libsane-sm3840.so
+%{_libdir}/sane/libsane-snapscan.so
+%{_libdir}/sane/libsane-sp15c.so
+%{_libdir}/sane/libsane-st400.so
+%{_libdir}/sane/libsane-stv680.so
+%{_libdir}/sane/libsane-tamarack.so
+%{_libdir}/sane/libsane-teco1.so
+%{_libdir}/sane/libsane-teco2.so
+%{_libdir}/sane/libsane-teco3.so
+%{_libdir}/sane/libsane-test.so
+%{_libdir}/sane/libsane-u12.so
+%{_libdir}/sane/libsane-umax.so
+%{_libdir}/sane/libsane-umax1220u.so
+%{_libdir}/sane/libsane-umax_pp.so
+%{_libdir}/sane/libsane-v4l.so
+%{_libdir}/sane/libsane-xerox_mfp.so
 %{_libdir}/sane/*.so.1
-%{_libdir}/sane/*.so.1.0.27
+%{_libdir}/sane/*.so.1.0.32
 
 %exclude %{_libdir}/sane/*gphoto2.so*
 
 %files drivers-cameras
 %{_libdir}/sane/libsane-gphoto2.so
 %{_libdir}/sane/libsane-gphoto2.so.1
-%{_libdir}/sane/libsane-gphoto2.so.1.0.27
+%{_libdir}/sane/libsane-gphoto2.so.1.0.32
 
 %files daemon
 %{_sbindir}/saned
 %{_mandir}/man8/saned*
-%{udevrulesdir}/66-saned.rules
+%{_sysusersdir}/sane-backends.conf
+%{_udevrulesdir}/66-saned.rules
 %{_unitdir}/saned.socket
 %{_unitdir}/saned@.service
 
 %changelog
-* Tue Sep 08 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.27-22
-- related 1852663 - needed to rebuild due infrastructure error
+* Thu Jul 21 2022 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.32-7
+- 2095461 - [RFE] sane-backends use systems-sysusers
 
-* Thu Sep 03 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.27-21
-- 1852663, 1848097 - NULL pointer dereference in sanei_epson_net_read function
+* Tue Aug 10 2021 Mohan Boddu <mboddu@redhat.com> - 1.0.32-6
+- Rebuilt for IMA sigs, glibc 2.34, aarch64 flags
+  Related: rhbz#1991688
 
-* Wed Jul 01 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.27-20
-- 1852468, 1852467, 1852466, 1852465 - prevent buffer overflow in esci2_img
-- 1852668, 1852667, 1852666, 1852665 - disable autodiscovery for epsonds backend
+* Fri Apr 16 2021 Mohan Boddu <mboddu@redhat.com> - 1.0.32-5
+- Rebuilt for RHEL 9 BETA on Apr 15th 2021. Related: rhbz#1947937
 
-* Tue Jul 24 2018 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.27-19
+* Tue Mar 09 2021 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.32-4
+- 1934308 - Several Epson devices cannot scan because they fail to set focus
+
+* Tue Mar 02 2021 Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 1.0.32-3
+- Rebuilt for updated systemd-rpm-macros
+  See https://pagure.io/fesco/issue/2583.
+
+* Thu Feb 18 2021 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.32-2
+- python3 is now needed for building pixma backend
+
+* Tue Feb 16 2021 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.32-1
+- 1928484 - sane-backends-1.0.32 is available
+
+* Wed Jan 27 2021 Fedora Release Engineering <releng@fedoraproject.org> - 1.0.31-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
+
+* Thu Nov 05 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.31-4
+- make is no longer in buildroot by default
+
+* Fri Oct 09 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.31-3
+- 1750899 - CANOSCAN N650U scanner device not correctly detected via USB
+
+* Mon Sep 14 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.31-2
+- make the base package depend on sane-airscan instead of libsane-airscan lib
+
+* Mon Aug 24 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.31-1
+- 1.0.31, backend cannon_lide70 added
+
+* Mon Aug 03 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.30-4
+- get libsane-airscan backend as one of backends
+
+* Tue Jul 28 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.30-3
+- add a scriptlet to disable epsonds autodiscovery in case an user changed epsonds.conf
+
+* Tue Jul 14 2020 Tom Stellard <tstellar@redhat.com> - 1.0.30-2
+- Use make macros
+- https://fedoraproject.org/wiki/Changes/UseMakeBuildInstallMacro
+
+* Tue May 19 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.30-1
+- 1.0.30
+
+* Mon May 11 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.29-8
+- 1778425 - scanimage segfaults for brother scan drivers due missing deprecated libnsl
+- spec file fixes - add link to upstream issue, correct source url
+
+* Thu Apr 02 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.29-7
+- remove escl backend - will be merged into sane-airscan in the future, so stop shipping it
+  to prevent escl going into RHEL
+
+* Mon Mar 23 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.29-6
+- complete fix for #1807751
+
+* Mon Mar 23 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.29-5
+- 1807751 - [abrt] sane-backends: std::__replacement_assert(): scanimage killed by SIGABRT
+
+* Mon Feb 10 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.29-4
+- really fix it...
+
+* Mon Feb 10 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.29-3
+- typo in install phase...
+
+* Mon Feb 10 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.29-2
+- remove qcam from armv7hl
+
+* Mon Feb 03 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.29-1
+- 1.0.29
+
+* Thu Jan 30 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.0.28-7
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
+
+* Wed Jan 15 2020 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.28-6
+- add buildrequires on systemd-rpm-macros
+
+* Thu Oct 31 2019 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.28-5
+- 1761530 - apply upstream patch
+
+* Fri Oct 18 2019 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.28-4
+- Ad 1761530 - actually apply the patch...
+
+* Thu Oct 17 2019 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.28-3
+- qcam backend support is tricky among different Fedora releases and archs - let the wildcard cover it
+
+* Thu Oct 17 2019 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.28-2
+- 1761145, 1761001, 1761051, 1761234 - genesys backend now needs gcc-c++, it is not built otherwise
+- 1758886 - CanoScan LiDE scanners supported by genesys backend are not detected
+- 1760916 - Samsung C460 does not have JPEG support
+- 1761530 - genesys aborts when accessing invalid vector index and built with GLIBCXX_ASSERTIONS
+- remove qcam from armvhl7 too
+
+* Mon Sep 30 2019 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.28-1
+- 1.0.28
+
+* Fri Jul 26 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1.0.27-25
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
+
+* Thu Jul 18 2019 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.27-24
+- 1730698 - add Canon CanonScan LiDE 300 support
+
+* Wed Apr 03 2019 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.27-23
+- mustek backend crashed from stack smashing (upstream issue #71)
+
+* Mon Feb 04 2019 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.27-22
+- 1671510 - Incorrect udev rule in sane-backends
+
+* Sat Feb 02 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1.0.27-21
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
+
+* Tue Jul 24 2018 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.27-20
 - corrected license
 
-* Tue Jul 24 2018 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.27-18
+* Tue Jul 24 2018 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.27-19
 - changed URL
 
+* Sat Jul 14 2018 Fedora Release Engineering <releng@fedoraproject.org> - 1.0.27-18
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
+
 * Thu Apr 19 2018 Zdenek Dohnal <zdohnal@redhat.com> - 1.0.27-17
 - revert samsung patch