resource-agents/SOURCES/bz1759115-aws-vpc-route53-1-update.patch
2021-09-10 03:52:59 +00:00

274 lines
9.7 KiB
Diff

--- ClusterLabs-resource-agents-e711383f/heartbeat/aws-vpc-route53.in 2018-06-29 14:05:02.000000000 +0200
+++ /home/oalbrigt/src/resource-agents/heartbeat/aws-vpc-route53.in 2019-11-07 12:24:18.822111495 +0100
@@ -152,9 +152,15 @@
END
}
-ec2ip_validate() {
+r53_validate() {
ocf_log debug "function: validate"
+ # Check for required binaries
+ ocf_log debug "Checking for required binaries"
+ for command in curl dig; do
+ check_binary "$command"
+ done
+
# Full name
[[ -z "$OCF_RESKEY_fullname" ]] && ocf_log error "Full name parameter not set $OCF_RESKEY_fullname!" && exit $OCF_ERR_CONFIGURED
@@ -175,32 +181,111 @@
ocf_log debug "ok"
if [ -n "$OCF_RESKEY_profile" ]; then
- AWS_PROFILE_OPT="--profile $OCF_RESKEY_profile"
+ AWS_PROFILE_OPT="--profile $OCF_RESKEY_profile --cli-connect-timeout 10"
else
- AWS_PROFILE_OPT="--profile default"
+ AWS_PROFILE_OPT="--profile default --cli-connect-timeout 10"
fi
return $OCF_SUCCESS
}
-ec2ip_monitor() {
- ec2ip_validate
+r53_monitor() {
+ #
+ # For every start action the agent will call Route53 API to check for DNS record
+ # otherwise it will try to get results directly bu querying the DNS using "dig".
+ # Due to complexity in some DNS architectures "dig" can fail, and if this happens
+ # the monitor will fallback to the Route53 API call.
+ #
+ # There will be no failure, failover or restart of the agent if the monitor operation fails
+ # hence we only return $OCF_SUCESS in this function
+ #
+ # In case of the monitor operation detects a wrong or non-existent Route53 DNS entry
+ # it will try to fix the existing one, or create it again
+ #
+ #
+ ARECORD=""
+ IPREGEX="^[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}$"
+ r53_validate
ocf_log debug "Checking Route53 record sets"
- IPADDRESS="$(ec2metadata aws ip | grep local-ipv4 | /usr/bin/awk '{ print $2 }')"
- ARECORD="$(aws $AWS_PROFILE_OPT route53 list-resource-record-sets --hosted-zone-id $OCF_RESKEY_hostedzoneid --query "ResourceRecordSets[?Name=='$OCF_RESKEY_fullname']" | grep RESOURCERECORDS | /usr/bin/awk '{ print $2 }' )"
- ocf_log debug "Found IP address: $ARECORD ."
- if [ "${ARECORD}" == "${IPADDRESS}" ]; then
- ocf_log debug "ARECORD $ARECORD found"
+ #
+ IPADDRESS="$(curl -s http://169.254.169.254/latest/meta-data/local-ipv4)"
+ #
+ if [ "$__OCF_ACTION" = "start" ] || ocf_is_probe ; then
+ #
+ cmd="aws $AWS_PROFILE_OPT route53 list-resource-record-sets --hosted-zone-id $OCF_RESKEY_hostedzoneid --query ResourceRecordSets[?Name=='$OCF_RESKEY_fullname']"
+ ocf_log info "Route53 Agent Starting or probing - executing monitoring API call: $cmd"
+ CLIRES="$($cmd 2>&1)"
+ rc=$?
+ ocf_log debug "awscli returned code: $rc"
+ if [ $rc -ne 0 ]; then
+ CLIRES=$(echo $CLIRES | grep -v '^$')
+ ocf_log warn "Route53 API returned an error: $CLIRES"
+ ocf_log warn "Skipping cluster action due to API call error"
+ return $OCF_ERR_GENERIC
+ fi
+ ARECORD=$(echo $CLIRES | grep RESOURCERECORDS | awk '{ print $5 }')
+ #
+ if ocf_is_probe; then
+ #
+ # Prevent R53 record change during probe
+ #
+ if [[ $ARECORD =~ $IPREGEX ]] && [ "$ARECORD" != "$IPADDRESS" ]; then
+ ocf_log debug "Route53 DNS record $ARECORD found at probing, disregarding"
+ return $OCF_NOT_RUNNING
+ fi
+ fi
+ else
+ #
+ cmd="dig +retries=3 +time=5 +short $OCF_RESKEY_fullname 2>/dev/null"
+ ocf_log info "executing monitoring command : $cmd"
+ ARECORD="$($cmd)"
+ rc=$?
+ ocf_log debug "dig return code: $rc"
+ #
+ if [[ ! $ARECORD =~ $IPREGEX ]] || [ $rc -ne 0 ]; then
+ ocf_log info "Fallback to Route53 API query due to DNS resolution failure"
+ cmd="aws $AWS_PROFILE_OPT route53 list-resource-record-sets --hosted-zone-id $OCF_RESKEY_hostedzoneid --query ResourceRecordSets[?Name=='$OCF_RESKEY_fullname']"
+ ocf_log debug "executing monitoring API call: $cmd"
+ CLIRES="$($cmd 2>&1)"
+ rc=$?
+ ocf_log debug "awscli return code: $rc"
+ if [ $rc -ne 0 ]; then
+ CLIRES=$(echo $CLIRES | grep -v '^$')
+ ocf_log warn "Route53 API returned an error: $CLIRES"
+ ocf_log warn "Monitor skipping cluster action due to API call error"
+ return $OCF_SUCCESS
+ fi
+ ARECORD=$(echo $CLIRES | grep RESOURCERECORDS | awk '{ print $5 }')
+ fi
+ #
+ fi
+ ocf_log info "Route53 DNS record pointing $OCF_RESKEY_fullname to IP address $ARECORD"
+ #
+ if [ "$ARECORD" == "$IPADDRESS" ]; then
+ ocf_log info "Route53 DNS record $ARECORD found"
+ return $OCF_SUCCESS
+ elif [[ $ARECORD =~ $IPREGEX ]] && [ "$ARECORD" != "$IPADDRESS" ]; then
+ ocf_log info "Route53 DNS record points to a different host, setting DNS record on Route53 to this host"
+ _update_record "UPSERT" "$IPADDRESS"
return $OCF_SUCCESS
else
- ocf_log debug "No ARECORD found"
- return $OCF_NOT_RUNNING
+ ocf_log info "No Route53 DNS record found, setting DNS record on Route53 to this host"
+ _update_record "UPSERT" "$IPADDRESS"
+ return $OCF_SUCCESS
fi
return $OCF_SUCCESS
}
_update_record() {
+ #
+ # This function is the one that will actually execute Route53's API call
+ # and configure the DNS record using the correct API calls and parameters
+ #
+ # It creates a temporary JSON file under /tmp with the required API payload
+ #
+ # Failures in this function are critical and will cause the agent to fail
+ #
update_action="$1"
IPADDRESS="$2"
ocf_log info "Updating Route53 $OCF_RESKEY_hostedzoneid with $IPADDRESS for $OCF_RESKEY_fullname"
@@ -209,19 +294,19 @@
ocf_exit_reason "Failed to create temporary file for record update"
exit $OCF_ERR_GENERIC
fi
- cat >>"${ROUTE53RECORD}" <<-EOF
+ cat >>"$ROUTE53RECORD" <<-EOF
{
"Comment": "Update record to reflect new IP address for a system ",
"Changes": [
{
- "Action": "${update_action}",
+ "Action": "$update_action",
"ResourceRecordSet": {
- "Name": "${OCF_RESKEY_fullname}",
+ "Name": "$OCF_RESKEY_fullname",
"Type": "A",
- "TTL": ${OCF_RESKEY_ttl},
+ "TTL": $OCF_RESKEY_ttl,
"ResourceRecords": [
{
- "Value": "${IPADDRESS}"
+ "Value": "$IPADDRESS"
}
]
}
@@ -229,46 +314,53 @@
]
}
EOF
- cmd="aws --profile ${OCF_RESKEY_profile} route53 change-resource-record-sets --hosted-zone-id ${OCF_RESKEY_hostedzoneid} \
- --change-batch file://${ROUTE53RECORD} "
+ cmd="aws --profile $OCF_RESKEY_profile route53 change-resource-record-sets --hosted-zone-id $OCF_RESKEY_hostedzoneid --change-batch file://$ROUTE53RECORD "
ocf_log debug "Executing command: $cmd"
- CHANGEID=$($cmd | grep CHANGEINFO | /usr/bin/awk -F'\t' '{ print $3 }' )
- ocf_log debug "Change id: ${CHANGEID}"
- rmtempfile ${ROUTE53RECORD}
- CHANGEID=$(echo $CHANGEID |cut -d'/' -f 3 |cut -d'"' -f 1 )
- ocf_log debug "Change id: ${CHANGEID}"
+ CLIRES="$($cmd 2>&1)"
+ rc=$?
+ ocf_log debug "awscli returned code: $rc"
+ if [ $rc -ne 0 ]; then
+ CLIRES=$(echo $CLIRES | grep -v '^$')
+ ocf_log warn "Route53 API returned an error: $CLIRES"
+ ocf_log warn "Skipping cluster action due to API call error"
+ return $OCF_ERR_GENERIC
+ fi
+ CHANGEID=$(echo $CLIRES | awk '{ print $12 }')
+ ocf_log debug "Change id: $CHANGEID"
+ rmtempfile $ROUTE53RECORD
+ CHANGEID=$(echo $CHANGEID | cut -d'/' -f 3 | cut -d'"' -f 1 )
+ ocf_log debug "Change id: $CHANGEID"
STATUS="PENDING"
- MYSECONDS=2
+ MYSECONDS=20
while [ "$STATUS" = 'PENDING' ]; do
- sleep ${MYSECONDS}
- STATUS="$(aws --profile ${OCF_RESKEY_profile} route53 get-change --id $CHANGEID | grep CHANGEINFO | /usr/bin/awk -F'\t' '{ print $4 }' |cut -d'"' -f 2 )"
- ocf_log debug "Waited for ${MYSECONDS} seconds and checked execution of Route 53 update status: ${STATUS} "
+ sleep $MYSECONDS
+ STATUS="$(aws --profile $OCF_RESKEY_profile route53 get-change --id $CHANGEID | grep CHANGEINFO | awk -F'\t' '{ print $4 }' |cut -d'"' -f 2 )"
+ ocf_log debug "Waited for $MYSECONDS seconds and checked execution of Route 53 update status: $STATUS "
done
}
-ec2ip_stop() {
- ocf_log info "Bringing down Route53 agent. (Will remove ARECORD)"
- IPADDRESS="$(ec2metadata aws ip | grep local-ipv4 | /usr/bin/awk '{ print $2 }')"
- ARECORD="$(aws $AWS_PROFILE_OPT route53 list-resource-record-sets --hosted-zone-id $OCF_RESKEY_hostedzoneid --query "ResourceRecordSets[?Name=='$OCF_RESKEY_fullname']" | grep RESOURCERECORDS | /usr/bin/awk '{ print $2 }' )"
- ocf_log debug "Found IP address: $ARECORD ."
- if [ ${ARECORD} != ${IPADDRESS} ]; then
- ocf_log debug "No ARECORD found"
- return $OCF_SUCCESS
- else
- # determine IP address
- IPADDRESS="$(ec2metadata aws ip | grep local-ipv4 | /usr/bin/awk '{ print $2 }')"
- # Patch file
- ocf_log debug "Deleting IP address to ${IPADDRESS}"
- return $OCF_SUCCESS
- fi
-
- _update_record "DELETE" "$IPADDRESS"
+r53_stop() {
+ #
+ # Stop operation doesn't perform any API call or try to remove the DNS record
+ # this mostly because this is not necessarily mandatory or desired
+ # the start and monitor functions will take care of changing the DNS record
+ # if the agent starts in a different cluster node
+ #
+ ocf_log info "Bringing down Route53 agent. (Will NOT remove Route53 DNS record)"
return $OCF_SUCCESS
}
-ec2ip_start() {
- IPADDRESS="$(ec2metadata aws ip | grep local-ipv4 | /usr/bin/awk '{ print $2 }')"
- _update_record "UPSERT" "$IPADDRESS"
+r53_start() {
+ #
+ # Start agent and config DNS in Route53
+ #
+ ocf_log info "Starting Route53 DNS update...."
+ IPADDRESS="$(curl -s http://169.254.169.254/latest/meta-data/local-ipv4)"
+ r53_monitor
+ if [ $? != $OCF_SUCCESS ]; then
+ ocf_log info "Could not start agent - check configurations"
+ return $OCF_ERR_GENERIC
+ fi
return $OCF_SUCCESS
}
@@ -284,16 +376,16 @@
exit $OCF_SUCCESS
;;
monitor)
- ec2ip_monitor
+ r53_monitor
;;
stop)
- ec2ip_stop
+ r53_stop
;;
validate-all)
- ec2ip_validate
+ r53_validate
;;
start)
- ec2ip_start
+ r53_start
;;
*)
usage