Compare commits

...

No commits in common. "c8-stream-6" and "c9-beta" have entirely different histories.

10 changed files with 187 additions and 379 deletions

2
.gitignore vendored
View File

@ -1,2 +1,2 @@
SOURCES/redis-6.2.7.tar.gz
SOURCES/redis-doc-8d4bf9b.tar.gz
SOURCES/redis-doc-3fdb6df.tar.gz

View File

@ -1,2 +1,2 @@
b01ef3f117c9815dea41bf2609e489a03c3a5ab1 SOURCES/redis-6.2.7.tar.gz
45ec7c3b4a034891252507febace7e25ee64b4d9 SOURCES/redis-doc-8d4bf9b.tar.gz
1af2e3e6d240e8b87d21bbd4d81fef78e9af7090 SOURCES/redis-doc-3fdb6df.tar.gz

View File

@ -1,117 +0,0 @@
Revert to 6.0.8 behavior to save configuration file
to fix "CONFIG REWRITE" when using /etc/redis.conf
as new behavior expect a writable directory
Revert: 90555566ed5cbd3e1c3df1293ba3bbf6098e34c3
See discussion about this breaking change in
https://github.com/redis/redis/issues/8051
diff -up ./src/config.c.rev ./src/config.c
--- ./src/config.c.rev 2022-05-09 14:48:31.118296748 +0200
+++ ./src/config.c 2022-05-09 14:48:41.571163767 +0200
@@ -1605,62 +1605,60 @@ void rewriteConfigRemoveOrphaned(struct
dictReleaseIterator(di);
}
-/* This function replaces the old configuration file with the new content
- * in an atomic manner.
+/* This function overwrites the old configuration file with the new content.
+ *
+ * 1) The old file length is obtained.
+ * 2) If the new content is smaller, padding is added.
+ * 3) A single write(2) call is used to replace the content of the file.
+ * 4) Later the file is truncated to the length of the new content.
+ *
+ * This way we are sure the file is left in a consistent state even if the
+ * process is stopped between any of the four operations.
*
* The function returns 0 on success, otherwise -1 is returned and errno
- * is set accordingly. */
+ * set accordingly. */
int rewriteConfigOverwriteFile(char *configfile, sds content) {
- int fd = -1;
- int retval = -1;
- char tmp_conffile[PATH_MAX];
- const char *tmp_suffix = ".XXXXXX";
- size_t offset = 0;
- ssize_t written_bytes = 0;
-
- int tmp_path_len = snprintf(tmp_conffile, sizeof(tmp_conffile), "%s%s", configfile, tmp_suffix);
- if (tmp_path_len <= 0 || (unsigned int)tmp_path_len >= sizeof(tmp_conffile)) {
- serverLog(LL_WARNING, "Config file full path is too long");
- errno = ENAMETOOLONG;
- return retval;
+ int retval = 0;
+ int fd = open(configfile,O_RDWR|O_CREAT,0644);
+ int content_size = sdslen(content), padding = 0;
+ struct stat sb;
+ sds content_padded;
+
+ /* 1) Open the old file (or create a new one if it does not
+ * exist), get the size. */
+ if (fd == -1) return -1; /* errno set by open(). */
+ if (fstat(fd,&sb) == -1) {
+ close(fd);
+ return -1; /* errno set by fstat(). */
}
-#ifdef _GNU_SOURCE
- fd = mkostemp(tmp_conffile, O_CLOEXEC);
-#else
- /* There's a theoretical chance here to leak the FD if a module thread forks & execv in the middle */
- fd = mkstemp(tmp_conffile);
-#endif
-
- if (fd == -1) {
- serverLog(LL_WARNING, "Could not create tmp config file (%s)", strerror(errno));
- return retval;
+ /* 2) Pad the content at least match the old file size. */
+ content_padded = sdsdup(content);
+ if (content_size < sb.st_size) {
+ /* If the old file was bigger, pad the content with
+ * a newline plus as many "#" chars as required. */
+ padding = sb.st_size - content_size;
+ content_padded = sdsgrowzero(content_padded,sb.st_size);
+ content_padded[content_size] = '\n';
+ memset(content_padded+content_size+1,'#',padding-1);
}
- while (offset < sdslen(content)) {
- written_bytes = write(fd, content + offset, sdslen(content) - offset);
- if (written_bytes <= 0) {
- if (errno == EINTR) continue; /* FD is blocking, no other retryable errors */
- serverLog(LL_WARNING, "Failed after writing (%zd) bytes to tmp config file (%s)", offset, strerror(errno));
- goto cleanup;
- }
- offset+=written_bytes;
+ /* 3) Write the new content using a single write(2). */
+ if (write(fd,content_padded,strlen(content_padded)) == -1) {
+ retval = -1;
+ goto cleanup;
}
- if (fsync(fd))
- serverLog(LL_WARNING, "Could not sync tmp config file to disk (%s)", strerror(errno));
- else if (fchmod(fd, 0644 & ~server.umask) == -1)
- serverLog(LL_WARNING, "Could not chmod config file (%s)", strerror(errno));
- else if (rename(tmp_conffile, configfile) == -1)
- serverLog(LL_WARNING, "Could not rename tmp config file (%s)", strerror(errno));
- else {
- retval = 0;
- serverLog(LL_DEBUG, "Rewritten config file (%s) successfully", configfile);
- }
+ /* 4) Truncate the file to the right length if we used padding. */
+ if (padding) {
+ if (ftruncate(fd,content_size) == -1) {
+ /* Non critical error... */
+ }
+ }
cleanup:
+ sdsfree(content_padded);
close(fd);
- if (retval) unlink(tmp_conffile);
return retval;
}

View File

@ -1,6 +0,0 @@
# If you need to change max open file limit
# for example, when you change maxclient in configuration
# you can change the value below
# see "man limits.conf" for information
redis soft nofile 10240
redis hard nofile 10240

View File

@ -1,94 +0,0 @@
#!/bin/sh
#
# redis init file for starting up the redis-sentinel daemon
#
# chkconfig: - 21 79
# description: Starts and stops the redis-sentinel daemon.
#
### BEGIN INIT INFO
# Provides: redis-sentinel
# Required-Start: $local_fs $remote_fs $network
# Required-Stop: $local_fs $remote_fs $network
# Short-Description: start and stop Sentinel server
# Description: A persistent key-value database
### END INIT INFO
# Source function library.
. /etc/rc.d/init.d/functions
name="redis-sentinel"
exec="/usr/bin/$name"
shut="/usr/libexec/redis-shutdown"
pidfile="/var/run/redis/sentinel.pid"
SENTINEL_CONFIG="/etc/redis-sentinel.conf"
[ -e /etc/sysconfig/redis-sentinel ] && . /etc/sysconfig/redis-sentinel
lockfile=/var/lock/subsys/redis
start() {
[ -f $SENTINEL_CONFIG ] || exit 6
[ -x $exec ] || exit 5
echo -n $"Starting $name: "
daemon --user ${REDIS_USER-redis} "$exec $SENTINEL_CONFIG --daemonize yes --pidfile $pidfile"
retval=$?
echo
[ $retval -eq 0 ] && touch $lockfile
return $retval
}
stop() {
echo -n $"Stopping $name: "
[ -x $shut ] && $shut $name
retval=$?
if [ -f $pidfile ]
then
# shutdown haven't work, try old way
killproc -p $pidfile $name
retval=$?
else
success "$name shutdown"
fi
echo
[ $retval -eq 0 ] && rm -f $lockfile
return $retval
}
restart() {
stop
start
}
rh_status() {
status -p $pidfile $name
}
rh_status_q() {
rh_status >/dev/null 2>&1
}
case "$1" in
start)
rh_status_q && exit 0
$1
;;
stop)
rh_status_q || exit 0
$1
;;
restart)
$1
;;
status)
rh_status
;;
condrestart|try-restart)
rh_status_q || exit 0
restart
;;
*)
echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart}"
exit 2
esac
exit $?

View File

@ -1,10 +1,12 @@
[Unit]
Description=Redis Sentinel
After=network.target
After=network-online.target
Wants=network-online.target
[Service]
ExecStart=/usr/bin/redis-sentinel /etc/redis-sentinel.conf --daemonize no --supervised systemd
ExecStop=/usr/libexec/redis-shutdown redis-sentinel
ExecStart=/usr/bin/redis-sentinel /etc/redis/sentinel.conf --daemonize no --supervised systemd
ExecStop=/usr/libexec/redis-shutdown sentinel
Type=notify
User=redis
Group=redis

View File

@ -12,7 +12,7 @@ if [ -z "$SERVICE_NAME" ]; then
fi
# Get the proper config file based on service name
CONFIG_FILE="/etc/$SERVICE_NAME.conf"
CONFIG_FILE="/etc/redis/$SERVICE_NAME.conf"
# Use awk to retrieve host, port from config file
HOST=`awk '/^[[:blank:]]*bind/ { print $2 }' $CONFIG_FILE | tail -n1`

View File

@ -1,94 +0,0 @@
#!/bin/sh
#
# redis init file for starting up the redis daemon
#
# chkconfig: - 20 80
# description: Starts and stops the redis daemon.
#
### BEGIN INIT INFO
# Provides: redis-server
# Required-Start: $local_fs $remote_fs $network
# Required-Stop: $local_fs $remote_fs $network
# Short-Description: start and stop Redis server
# Description: A persistent key-value database
### END INIT INFO
# Source function library.
. /etc/rc.d/init.d/functions
name="redis-server"
exec="/usr/bin/$name"
shut="/usr/libexec/redis-shutdown"
pidfile="/var/run/redis/redis.pid"
REDIS_CONFIG="/etc/redis.conf"
[ -e /etc/sysconfig/redis ] && . /etc/sysconfig/redis
lockfile=/var/lock/subsys/redis
start() {
[ -f $REDIS_CONFIG ] || exit 6
[ -x $exec ] || exit 5
echo -n $"Starting $name: "
daemon --user ${REDIS_USER-redis} "$exec $REDIS_CONFIG --daemonize yes --pidfile $pidfile"
retval=$?
echo
[ $retval -eq 0 ] && touch $lockfile
return $retval
}
stop() {
echo -n $"Stopping $name: "
[ -x $shut ] && $shut
retval=$?
if [ -f $pidfile ]
then
# shutdown haven't work, try old way
killproc -p $pidfile $name
retval=$?
else
success "$name shutdown"
fi
echo
[ $retval -eq 0 ] && rm -f $lockfile
return $retval
}
restart() {
stop
start
}
rh_status() {
status -p $pidfile $name
}
rh_status_q() {
rh_status >/dev/null 2>&1
}
case "$1" in
start)
rh_status_q && exit 0
$1
;;
stop)
rh_status_q || exit 0
$1
;;
restart)
$1
;;
status)
rh_status
;;
condrestart|try-restart)
rh_status_q || exit 0
restart
;;
*)
echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart}"
exit 2
esac
exit $?

View File

@ -1,9 +1,11 @@
[Unit]
Description=Redis persistent key-value database
After=network.target
After=network-online.target
Wants=network-online.target
[Service]
ExecStart=/usr/bin/redis-server /etc/redis.conf --daemonize no --supervised systemd
ExecStart=/usr/bin/redis-server /etc/redis/redis.conf --daemonize no --supervised systemd
ExecStop=/usr/libexec/redis-shutdown
Type=notify
User=redis

View File

@ -1,5 +1,5 @@
#
# RHEL / Fedora spec file for redis
# Fedora spec file for redis
#
# License: MIT
# http://opensource.org/licenses/MIT
@ -12,7 +12,7 @@
# Commit IDs for the (unversioned) redis-doc repository
# https://fedoraproject.org/wiki/Packaging:SourceURL "Commit Revision"
%global doc_commit 8d4bf9bc476829a84a055c049be72634d6e938df
%global doc_commit 3fdb6df44ecd5c4d99ea52a0133177f5ebc24805
%global short_doc_commit %(c=%{doc_commit}; echo ${c:0:7})
# %%{rpmmacrodir} not usable on EL-6
@ -30,13 +30,10 @@ Source0: https://download.redis.io/releases/%{name}-%{version}.tar.gz
Source1: %{name}.logrotate
Source2: %{name}-sentinel.service
Source3: %{name}.service
Source4: %{name}-sentinel.init
Source5: %{name}.init
Source6: %{name}-shutdown
Source7: %{name}-limit-systemd
Source8: %{name}-limit-init
Source9: macros.%{name}
Source10: https://github.com/antirez/%{name}-doc/archive/%{doc_commit}/%{name}-doc-%{short_doc_commit}.tar.gz
Source10: https://github.com/%{name}/%{name}-doc/archive/%{doc_commit}/%{name}-doc-%{short_doc_commit}.tar.gz
# To refresh patches:
# tar xf redis-xxx.tar.gz && cd redis-xxx && git init && git add . && git commit -m "%%{version} baseline"
@ -44,13 +41,10 @@ Source10: https://github.com/antirez/%{name}-doc/archive/%{doc_commit}/
# Then refresh your patches
# git format-patch HEAD~<number of expected patches>
# Update configuration for Fedora
# https://github.com/antirez/redis/pull/3491 - man pages
# https://github.com/redis/redis/pull/3491 - man pages
Patch0001: 0001-1st-man-pageis-for-redis-cli-redis-benchmark-redis-c.patch
# revert BC break
Patch0003: redis-config.patch
# Security patches
BuildRequires: make
BuildRequires: gcc
%if %{with tests}
BuildRequires: procps-ng
@ -59,6 +53,8 @@ BuildRequires: tcl
BuildRequires: pkgconfig(libsystemd)
BuildRequires: systemd-devel
BuildRequires: openssl-devel
# redis-trib functionality migrated to redis-cli
Obsoletes: redis-trib < 5
# Required for redis-shutdown
Requires: /bin/awk
Requires: logrotate
@ -67,7 +63,7 @@ Requires(post): systemd
Requires(preun): systemd
Requires(postun): systemd
# from deps/hiredis/hiredis.h
Provides: bundled(hiredis) = 1.0.0
Provides: bundled(hiredis) = 0.14.0
# from deps/jemalloc/VERSION
Provides: bundled(jemalloc) = 5.1.0
# from deps/lua/src/lua.h
@ -132,7 +128,6 @@ administration and development.
%setup -q
mv ../%{name}-doc-%{doc_commit} doc
%patch0001 -p1
%patch0003 -p1 -b .rev
mv deps/lua/COPYRIGHT COPYRIGHT-lua
mv deps/jemalloc/COPYING COPYING-jemalloc
@ -154,7 +149,7 @@ fi
%global make_flags DEBUG="" V="echo" LDFLAGS="%{?__global_ldflags}" CFLAGS+="%{optflags} -fPIC" INSTALL="install -p" PREFIX=%{buildroot}%{_prefix} BUILD_WITH_SYSTEMD=yes BUILD_TLS=yes
%build
make %{?_smp_mflags} %{make_flags} all
%make_build %{make_flags} all
%install
make %{make_flags} install
@ -169,8 +164,8 @@ install -d %{buildroot}%{redis_modules_dir}
install -pDm644 %{S:1} %{buildroot}%{_sysconfdir}/logrotate.d/%{name}
# Install configuration files.
install -pDm640 %{name}.conf %{buildroot}%{_sysconfdir}/%{name}.conf
install -pDm640 sentinel.conf %{buildroot}%{_sysconfdir}/%{name}-sentinel.conf
install -pDm640 %{name}.conf %{buildroot}%{_sysconfdir}/%{name}/%{name}.conf
install -pDm640 sentinel.conf %{buildroot}%{_sysconfdir}/%{name}/sentinel.conf
# Install systemd unit files.
mkdir -p %{buildroot}%{_unitdir}
@ -214,7 +209,7 @@ install -pDm644 %{S:9} %{buildroot}%{macrosdir}/macros.%{name}
%check
%if %{with tests}
# https://github.com/antirez/redis/issues/1417 (for "taskset -c 1")
# https://github.com/redis/redis/issues/1417 (for "taskset -c 1")
taskset -c 1 make %{make_flags} test
make %{make_flags} test-sentinel
%endif
@ -228,6 +223,25 @@ useradd -r -g %{name} -d %{_sharedstatedir}/%{name} -s /sbin/nologin \
exit 0
%post
if [ -f %{_sysconfdir}/%{name}.conf -a ! -L %{_sysconfdir}/%{name}.conf ]; then
if [ -f %{_sysconfdir}/%{name}/%{name}.conf.rpmnew ]; then
rm %{_sysconfdir}/%{name}/%{name}.conf.rpmnew
fi
if [ -f %{_sysconfdir}/%{name}/%{name}.conf ]; then
mv %{_sysconfdir}/%{name}/%{name}.conf %{_sysconfdir}/%{name}/%{name}.conf.rpmnew
fi
mv %{_sysconfdir}/%{name}.conf %{_sysconfdir}/%{name}/%{name}.conf
echo -e "\nWarning: %{name} configuration is now in %{_sysconfdir}/%{name} directory\n"
fi
if [ -f %{_sysconfdir}/%{name}-sentinel.conf -a ! -L %{_sysconfdir}/%{name}-sentinel.conf ]; then
if [ -f %{_sysconfdir}/%{name}/sentinel.conf.rpmnew ]; then
rm %{_sysconfdir}/%{name}/sentinel.conf.rpmnew
fi
if [ -f %{_sysconfdir}/%{name}/sentinel.conf ]; then
mv %{_sysconfdir}/%{name}/sentinel.conf %{_sysconfdir}/%{name}/sentinel.conf.rpmnew
fi
mv %{_sysconfdir}/%{name}-sentinel.conf %{_sysconfdir}/%{name}/sentinel.conf
fi
%systemd_post %{name}.service
%systemd_post %{name}-sentinel.service
@ -246,8 +260,9 @@ exit 0
%license COPYING-jemalloc
%license COPYING-hiredis
%config(noreplace) %{_sysconfdir}/logrotate.d/%{name}
%attr(0640, redis, root) %config(noreplace) %{_sysconfdir}/%{name}.conf
%attr(0640, redis, root) %config(noreplace) %{_sysconfdir}/%{name}-sentinel.conf
%attr(0750, redis, root) %dir %{_sysconfdir}/%{name}
%attr(0640, redis, root) %config(noreplace) %{_sysconfdir}/%{name}/%{name}.conf
%attr(0640, redis, root) %config(noreplace) %{_sysconfdir}/%{name}/sentinel.conf
%dir %attr(0750, redis, redis) %{_libdir}/%{name}
%dir %attr(0750, redis, redis) %{redis_modules_dir}
%dir %attr(0750, redis, redis) %{_sharedstatedir}/%{name}
@ -274,68 +289,168 @@ exit 0
%{macrosdir}/*
%files doc
# main package is not required
%license COPYING
# specific for documentation (CC-BY-SA)
%license doc/LICENSE
%docdir %{_docdir}/%{name}
%{_docdir}/%{name}
%changelog
* Mon May 9 2022 Remi Collet <rcollet@redhat.com> - 6.2.7-1
- rebase to 6.2.7 #1999873
* Tue May 10 2022 Remi Collet <rcollet@redhat.com> - 6.2.7-1
- rebase to 6.2.7 #2083151
* Mon Oct 11 2021 Remi Collet <rcollet@redhat.com> - 6.0.9-5
- fix denial of service via Redis Standard Protocol (RESP) request
CVE-2021-32675
* Wed Nov 3 2021 Remi Collet <remi@remirepo.net> - 6.2.6-1
- rebase to 6.2.6 #2013992
- refresh documentation
- use proper license file for documentation
* Fri Oct 8 2021 Remi Collet <rcollet@redhat.com> - 6.0.9-4
- fix lua scripts can overflow the heap-based Lua stack
CVE-2021-32626
- fix integer overflow issue with Streams
CVE-2021-32627
- fix integer overflow bug in the ziplist data structure
CVE-2021-32628
- fix integer overflow issue with intsets
CVE-2021-32687
- fix integer overflow issue with strings
CVE-2021-41099
* Tue Aug 10 2021 Mohan Boddu <mboddu@redhat.com> - 6.2.3-3
- Rebuilt for IMA sigs, glibc 2.34, aarch64 flags
Related: rhbz#1991688
* Wed May 12 2021 Remi Collet <rcollet@redhat.com> - 6.0.9-3
- fix integer overflow via STRALGO LCS command
CVE-2021-29477
* Wed Jun 16 2021 Mohan Boddu <mboddu@redhat.com> - 6.2.3-2
- Rebuilt for RHEL 9 BETA for openssl 3.0
Related: rhbz#1971065
* Tue Nov 24 2020 Remi Collet <rcollet@redhat.com> - 6.0.9-2
- revert "simplify config rewrite file" and keep
configuration in /etc
* Tue May 4 2021 Remi Collet <remi@remirepo.net> - 6.2.3-1
- Upstream 6.2.3 release
* Thu Oct 29 2020 Remi Collet <rcollet@redhat.com> - 6.0.9-1
- update to 6.0.9
* Tue Apr 20 2021 Remi Collet <remi@remirepo.net> - 6.2.2-1
- Upstream 6.2.2 release
* Tue Oct 20 2020 Remi Collet <rcollet@redhat.com> - 6.0.8-1
- update to 6.0.8 for new stream #1862063
* Fri Apr 16 2021 Mohan Boddu <mboddu@redhat.com> - 6.2.1-2
- Rebuilt for RHEL 9 BETA on Apr 15th 2021. Related: rhbz#1947937
* Thu Jul 11 2019 Remi Collet <rcollet@redhat.com> - 5.0.3-2
- fix Heap buffer overflow in HyperLogLog triggered by malicious client
CVE-2019-10192
- fix Stack buffer overflow in HyperLogLog triggered by malicious client
CVE-2019-10193
* Thu Apr 01 2021 Nathan Scott <nathans@redhat.com> - 6.2.1-1
- Upstream 6.2.1 release
- Merged make-macros spec change from Tom Stellard
* Thu Dec 13 2018 Remi Collet <rcollet@redhat.com> - 5.0.3-1
- update to 5.0.3
* Tue Mar 02 2021 Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> - 6.2.0-2
- Rebuilt for updated systemd-rpm-macros
See https://pagure.io/fesco/issue/2583.
* Mon Mar 01 2021 Nathan Scott <nathans@redhat.com> - 6.2.0-1
- Upstream 6.2.0 release (RHBZ #1915463).
- drop patch merged upstream.
* Wed Feb 24 2021 Nathan Scott <nathans@redhat.com> - 6.0.11-1
- Upstream 6.0.11 release.
* Wed Jan 27 2021 Fedora Release Engineering <releng@fedoraproject.org> - 6.0.10-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
* Wed Jan 13 2021 Remi Collet <remi@remirepo.net> - 6.0.10-1
- Upstream 6.0.10 release.
* Tue Nov 24 2020 Remi Collet <remi@remirepo.net> - 6.0.9-3
- fix check for regular file, not symlink
* Mon Nov 23 2020 Remi Collet <remi@remirepo.net> - 6.0.9-2
- move configuration in /etc/redis per upstream recommendation
see https://github.com/redis/redis/issues/8051
* Tue Oct 27 2020 Remi Collet <remi@remirepo.net> - 6.0.9-1
- Upstream 6.0.9 release.
* Tue Oct 20 2020 Remi Collet <remi@remirepo.net> - 6.0.8-2
- add missing LICENSE files in main package
* Thu Sep 10 2020 Remi Collet <remi@remirepo.net> - 6.0.8-1
- Upstream 6.0.8 release.
* Tue Sep 1 2020 Remi Collet <remi@remirepo.net> - 6.0.7-1
- Upstream 6.0.7 release.
- drop patch merged upstream
* Wed Jul 29 2020 Fedora Release Engineering <releng@fedoraproject.org> - 6.0.6-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
* Tue Jul 21 2020 Remi Collet <rcollet@redhat.com> - 6.0.6-1
- Upstream 6.0.6 release.
- drop patch merged upstream
- open https://github.com/redis/redis/pull/7543 fix deprecated tail syntax
* Wed Jun 10 2020 Nathan Scott <nathans@redhat.com> - 6.0.5-1
- Upstream 6.0.5 release.
* Thu May 28 2020 Remi Collet <remi@remirepo.net> - 6.0.4-3
- Add comment for TimeoutStartSec and TimeoutStopSec in limit.conf
- Fix missing notification to systemd for sentinel
patch from https://github.com/redis/redis/pull/7168
- Upstream 6.0.4 release.
* Mon May 18 2020 Nathan Scott <nathans@redhat.com> - 6.0.3-1
- Upstream 6.0.3 release.
* Wed May 6 2020 Remi Collet <rcollet@redhat.com> - 6.0.1-1
- Upstream 6.0.1 release.
* Fri May 01 2020 Nathan Scott <nathans@redhat.com> - 6.0.0-1
- Upstream 6.0.0 release.
* Fri Mar 13 2020 Nathan Scott <nathans@redhat.com> - 5.0.8-1
- Upstream 5.0.8 release.
* Wed Feb 12 2020 Nathan Scott <nathans@redhat.com> - 5.0.7-3
- Patch extern SDS_NOINIT definition for gcc 10 (RHBZ #1799969)
* Thu Jan 30 2020 Fedora Release Engineering <releng@fedoraproject.org> - 5.0.7-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
* Tue Nov 19 2019 Carl George <carl@george.computer> - 5.0.7-1
- Latest upstream
* Thu Sep 26 2019 Nathan Scott <nathans@redhat.com> - 5.0.6-1
- Upstream 5.0.6 release and redis-doc updates.
* Fri Jul 26 2019 Fedora Release Engineering <releng@fedoraproject.org> - 5.0.5-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
* Mon Jul 15 2019 Nathan Scott <nathans@redhat.com> - 5.0.5-2
- Use the (modified) bundled jemalloc for defrag (RHBZ #1725852)
* Thu May 16 2019 Nathan Scott <nathans@redhat.com> - 5.0.5-1
- Upstream 5.0.5 release and redis-doc updates.
* Sat May 11 2019 Nathan Scott <nathans@redhat.com> - 5.0.4-2
- Obsolete redis-trib - functionality now in redis-cli(1)
- Remove old chkconfig support, all systemd platforms now
* Tue Mar 19 2019 Nathan Scott <nathans@redhat.com> - 5.0.4-1
- Upstream 5.0.4 release and redis-doc updates.
- Fix sentinel.conf logfile line addition.
* Sat Feb 02 2019 Fedora Release Engineering <releng@fedoraproject.org> - 5.0.3-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
* Thu Dec 13 2018 Nathan Scott <nathans@redhat.com> - 5.0.3-1
- Upstream 5.0.3 release and redis-doc updates.
* Fri Nov 23 2018 Nathan Scott <nathans@redhat.com> - 5.0.2-1
- Upstream 5.0.2 release and redis-doc updates.
* Thu Nov 08 2018 Nathan Scott <nathans@redhat.com> - 5.0.1-1
- Upstream 5.0.1 release.
* Thu Oct 18 2018 Nathan Scott <nathans@redhat.com> - 5.0.0-1
- Update systemd service files for network-online requirement
- Upstream 5.0.0 release.
* Thu Aug 09 2018 Nathan Scott <nathans@redhat.com> - 4.0.11-1
- Drop the pandoc build dependency, install only markdown.
- Upstream 4.0.11 release.
* Sat Jul 14 2018 Fedora Release Engineering <releng@fedoraproject.org> - 4.0.10-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Mon Jun 25 2018 Remi Collet <rcollet@redhat.com> - 4.0.10-2
- drop build dependency on pandoc
- drop dependency on jemalloc #1591762
- fix License (BSD and MIT)
- add bundled libraries licences
- cleanup conditions from spec file
- add information about bundled lzf
* Thu Jun 14 2018 Nathan Scott <nathans@redhat.com> - 4.0.10-1
- Upstream 4.0.10 release.
* Mon May 21 2018 Joe Orton <jorton@redhat.com> - 4.0.9-1.2
- rebuild (#1571197)
* Tue Mar 27 2018 Nathan Scott <nathans@redhat.com> - 4.0.9-1
- Upstream 4.0.9 release.
@ -425,11 +540,11 @@ exit 0
* Wed Sep 14 2016 Remi Collet <remi@fedoraproject.org> - 3.2.3-2
- add missing man pages #1374577
using patch from https://github.com/antirez/redis/pull/3491
using patch from https://github.com/redis/redis/pull/3491
- data and configuration should not be publicly readable #1374700
- remove /var/run/redis with systemd #1374728
- provide redis-check-rdb as a symlink to redis-server #1374736
using patch from https://github.com/antirez/redis/pull/3494
using patch from https://github.com/redis/redis/pull/3494
- move redis-shutdown to libexec
* Thu Aug 4 2016 Haïkel Guémar <hguemar@fedoraproject.org> - 3.2.3-1