rpms/rear
7
0
Fork 0
Code Issues Pull Requests Releases Activity
d8d0adff62
rear/rear-bz1945869.patch
James Antill 5ebf128954 Auto sync2gitlab import of rear-2.6-4.el8.src.rpm
2022-05-26 14:06:33 -04:00

275 lines
12 KiB
Diff
Raw Blame History

diff --git a/usr/share/rear/finalize/Linux-i386/670_run_efibootmgr.sh b/usr/share/rear/finalize/Linux-i386/670_run_efibootmgr.sh
old mode 100644
new mode 100755
index cc646359..33d87767
--- a/usr/share/rear/finalize/Linux-i386/670_run_efibootmgr.sh
+++ b/usr/share/rear/finalize/Linux-i386/670_run_efibootmgr.sh
@@ -8,6 +8,10 @@ is_true $USING_UEFI_BOOTLOADER || return 0
# (cf. finalize/Linux-i386/610_EFISTUB_run_efibootmgr.sh):
is_true $EFI_STUB && return
+LogPrint "Creating EFI Boot Manager entries..."
+
+local esp_mountpoint esp_mountpoint_inside boot_efi_parts boot_efi_dev
+
# When UEFI_BOOTLOADER is not a regular file in the restored target system
# (cf. how esp_mountpoint is set below) it means BIOS is used
# (cf. rescue/default/850_save_sysfs_uefi_vars.sh)
@@ -15,64 +19,80 @@ is_true $EFI_STUB && return
# because when UEFI_BOOTLOADER is empty the test below evaluates to
# test -f /mnt/local/
# which also returns false because /mnt/local/ is a directory
-# (cf. https://github.com/rear/rear/pull/2051/files#r258826856):
-test -f "$TARGET_FS_ROOT/$UEFI_BOOTLOADER" || return 0
+# (cf. https://github.com/rear/rear/pull/2051/files#r258826856)
+# but using BIOS conflicts with USING_UEFI_BOOTLOADER is true
+# i.e. we should create EFI Boot Manager entries but we cannot:
+if ! test -f "$TARGET_FS_ROOT/$UEFI_BOOTLOADER" ; then
+ LogPrintError "Failed to create EFI Boot Manager entries (UEFI bootloader '$UEFI_BOOTLOADER' not found under target $TARGET_FS_ROOT)"
+ return 1
+fi
# Determine where the EFI System Partition (ESP) is mounted in the currently running recovery system:
-esp_mountpoint=$( df -P "$TARGET_FS_ROOT/$UEFI_BOOTLOADER" | tail -1 | awk '{print $6}' )
-# Use TARGET_FS_ROOT/boot/efi as fallback ESP mountpoint:
-test "$esp_mountpoint" || esp_mountpoint="$TARGET_FS_ROOT/boot/efi"
+esp_mountpoint=$( filesystem_name "$TARGET_FS_ROOT/$UEFI_BOOTLOADER" )
+# Use TARGET_FS_ROOT/boot/efi as fallback ESP mountpoint (filesystem_name returns "/"
+# if mountpoint not found otherwise):
+if [ "$esp_mountpoint" = "/" ] ; then
+ esp_mountpoint="$TARGET_FS_ROOT/boot/efi"
+ LogPrint "Mountpoint of $TARGET_FS_ROOT/$UEFI_BOOTLOADER not found, trying $esp_mountpoint"
+fi
# Skip if there is no esp_mountpoint directory (e.g. the fallback ESP mountpoint may not exist).
# Double quotes are mandatory here because 'test -d' without any (possibly empty) argument results true:
-test -d "$esp_mountpoint" || return 0
-
-BootEfiDev="$( mount | grep "$esp_mountpoint" | awk '{print $1}' )"
-# /dev/sda1 or /dev/mapper/vol34_part2 or /dev/mapper/mpath99p4
-Dev=$( get_device_name $BootEfiDev )
-# 1 (must anyway be a low nr <9)
-ParNr=$( get_partition_number $Dev )
-# /dev/sda or /dev/mapper/vol34_part or /dev/mapper/mpath99p or /dev/mmcblk0p
-Disk=$( echo ${Dev%$ParNr} )
-
-# Strip trailing partition remainders like '_part' or '-part' or 'p'
-# if we have 'mapper' in disk device name:
-if [[ ${Dev/mapper//} != $Dev ]] ; then
- # we only expect mpath_partX or mpathpX or mpath-partX
- case $Disk in
- (*p) Disk=${Disk%p} ;;
- (*-part) Disk=${Disk%-part} ;;
- (*_part) Disk=${Disk%_part} ;;
- (*) Log "Unsupported kpartx partition delimiter for $Dev"
- esac
+if ! test -d "$esp_mountpoint" ; then
+ LogPrintError "Failed to create EFI Boot Manager entries (no ESP mountpoint directory $esp_mountpoint)"
+ return 1
fi
-# For eMMC devices the trailing 'p' in the Disk value
-# (as in /dev/mmcblk0p that is derived from /dev/mmcblk0p1)
-# needs to be stripped (to get /dev/mmcblk0), otherwise the
-# efibootmgr call fails because of a wrong disk device name.
-# See also https://github.com/rear/rear/issues/2103
-if [[ $Disk = *'/mmcblk'+([0-9])p ]] ; then
- Disk=${Disk%p}
-fi
+# Mount point inside the target system,
+# accounting for possible trailing slashes in TARGET_FS_ROOT
+esp_mountpoint_inside="${esp_mountpoint#${TARGET_FS_ROOT%%*(/)}}"
-# For NVMe devices the trailing 'p' in the Disk value
-# (as in /dev/nvme0n1p that is derived from /dev/nvme0n1p1)
-# needs to be stripped (to get /dev/nvme0n1), otherwise the
-# efibootmgr call fails because of a wrong disk device name.
-# See also https://github.com/rear/rear/issues/1564
-if [[ $Disk = *'/nvme'+([0-9])n+([0-9])p ]] ; then
- Disk=${Disk%p}
+boot_efi_parts=$( find_partition "fs:$esp_mountpoint_inside" fs )
+if ! test "$boot_efi_parts" ; then
+ LogPrint "Unable to find ESP $esp_mountpoint_inside in layout"
+ LogPrint "Trying to determine device currently mounted at $esp_mountpoint as fallback"
+ boot_efi_dev="$( mount | grep "$esp_mountpoint" | awk '{print $1}' )"
+ if ! test "$boot_efi_dev" ; then
+ LogPrintError "Cannot create EFI Boot Manager entry (unable to find ESP $esp_mountpoint among mounted devices)"
+ return 1
+ fi
+ if test $(get_component_type "$boot_efi_dev") = part ; then
+ boot_efi_parts="$boot_efi_dev"
+ else
+ boot_efi_parts=$( find_partition "$boot_efi_dev" )
+ fi
+ if ! test "$boot_efi_parts" ; then
+ LogPrintError "Cannot create EFI Boot Manager entry (unable to find partition for $boot_efi_dev)"
+ return 1
+ fi
+ LogPrint "Using fallback EFI boot partition(s) $boot_efi_parts (unable to find ESP $esp_mountpoint_inside in layout)"
fi
+local bootloader partition_block_device partition_number disk efipart
+
# EFI\fedora\shim.efi
-BootLoader=$( echo $UEFI_BOOTLOADER | cut -d"/" -f4- | sed -e 's;/;\\;g' )
-LogPrint "Creating EFI Boot Manager entry '$OS_VENDOR $OS_VERSION' for '$BootLoader' (UEFI_BOOTLOADER='$UEFI_BOOTLOADER')"
-Log efibootmgr --create --gpt --disk ${Disk} --part ${ParNr} --write-signature --label \"${OS_VENDOR} ${OS_VERSION}\" --loader \"\\${BootLoader}\"
-if efibootmgr --create --gpt --disk ${Disk} --part ${ParNr} --write-signature --label "${OS_VENDOR} ${OS_VERSION}" --loader "\\${BootLoader}" ; then
- # ok, boot loader has been set-up - tell rear we are done using following var.
- NOBOOTLOADER=''
- return
-fi
+bootloader=$( echo $UEFI_BOOTLOADER | cut -d"/" -f4- | sed -e 's;/;\\;g' )
+
+for efipart in $boot_efi_parts ; do
+ # /dev/sda1 or /dev/mapper/vol34_part2 or /dev/mapper/mpath99p4
+ partition_block_device=$( get_device_name $efipart )
+ # 1 or 2 or 4 for the examples above
+ partition_number=$( get_partition_number $partition_block_device )
+ if ! disk=$( get_device_from_partition $partition_block_device $partition_number ) ; then
+ LogPrintError "Cannot create EFI Boot Manager entry for ESP $partition_block_device (unable to find the underlying disk)"
+ # do not error out - we may be able to locate other disks if there are more of them
+ continue
+ fi
+ LogPrint "Creating EFI Boot Manager entry '$OS_VENDOR $OS_VERSION' for '$bootloader' (UEFI_BOOTLOADER='$UEFI_BOOTLOADER') "
+ Log efibootmgr --create --gpt --disk $disk --part $partition_number --write-signature --label \"${OS_VENDOR} ${OS_VERSION}\" --loader \"\\${bootloader}\"
+ if efibootmgr --create --gpt --disk $disk --part $partition_number --write-signature --label "${OS_VENDOR} ${OS_VERSION}" --loader "\\${bootloader}" ; then
+ # ok, boot loader has been set-up - continue with other disks (ESP can be on RAID)
+ NOBOOTLOADER=''
+ else
+ LogPrintError "efibootmgr failed to create EFI Boot Manager entry on $disk partition $partition_number (ESP $partition_block_device )"
+ fi
+done
-LogPrintError "efibootmgr failed to create EFI Boot Manager entry for '$BootLoader' (UEFI_BOOTLOADER='$UEFI_BOOTLOADER')"
+is_true $NOBOOTLOADER || return 0
+LogPrintError "efibootmgr failed to create EFI Boot Manager entry for '$bootloader' (UEFI_BOOTLOADER='$UEFI_BOOTLOADER')"
+return 1
diff --git a/usr/share/rear/lib/layout-functions.sh b/usr/share/rear/lib/layout-functions.sh
index 54ddb50f..cdd81a14 100644
--- a/usr/share/rear/lib/layout-functions.sh
+++ b/usr/share/rear/lib/layout-functions.sh
@@ -302,12 +302,20 @@ get_child_components() {
done
}
-# Return all ancestors of component $1 [ of type $2 ]
+# Return all ancestors of component $1 [ of type $2 [ skipping types $3 during resolution ] ]
get_parent_components() {
- declare -a ancestors devlist
- declare current child parent
+ declare -a ancestors devlist ignoretypes
+ declare current child parent parenttype
devlist=( "$1" )
+ if [[ "$3" ]] ; then
+ # third argument should, if present, be a space-separated list
+ # of types to ignore when walking up the dependency tree.
+ # Convert it to array
+ ignoretypes=( $3 )
+ else
+ ignoretypes=()
+ fi
while (( ${#devlist[@]} )) ; do
current=${devlist[0]}
@@ -318,6 +326,13 @@ get_parent_components() {
if IsInArray "$parent" "${ancestors[@]}" ; then
continue
fi
+ ### ...test if parent is of a correct type if requested...
+ if [[ ${#ignoretypes[@]} -gt 0 ]] ; then
+ parenttype=$(get_component_type "$parent")
+ if IsInArray "$parenttype" "${ignoretypes[@]}" ; then
+ continue
+ fi
+ fi
### ...and add them to the list
devlist+=( "$parent" )
ancestors+=( "$parent" )
@@ -345,22 +360,24 @@ get_parent_components() {
}
# find_devices <other>
+# ${2+"$2"} in the following functions ensures that $2 gets passed down quoted if present
+# and ignored if not present
# Find the disk device(s) component $1 resides on.
find_disk() {
- get_parent_components "$1" "disk"
+ get_parent_components "$1" "disk" ${2+"$2"}
}
find_multipath() {
- get_parent_components "$1" "multipath"
+ get_parent_components "$1" "multipath" ${2+"$2"}
}
find_disk_and_multipath() {
- find_disk "$1"
- is_true "$AUTOEXCLUDE_MULTIPATH" || find_multipath "$1"
+ find_disk "$1" ${2+"$2"}
+ is_true "$AUTOEXCLUDE_MULTIPATH" || find_multipath "$1" ${2+"$2"}
}
find_partition() {
- get_parent_components "$1" "part"
+ get_parent_components "$1" "part" ${2+"$2"}
}
# The get_partition_number function
@@ -413,6 +430,54 @@ get_partition_number() {
echo $partition_number
}
+# Extract the underlying device name from the full partition device name.
+# Underlying device may be a disk, a multipath device or other devices that can be partitioned.
+# Should we use the information in $LAYOUT_DEPS, like get_parent_component does,
+# instead of string munging?
+function get_device_from_partition() {
+ local partition_block_device
+ local device
+ local partition_number
+
+ partition_block_device=$1
+ test -b "$partition_block_device" || BugError "get_device_from_partition called with '$partition_block_device' that is no block device"
+ partition_number=${2-$(get_partition_number $partition_block_device )}
+ # /dev/sda or /dev/mapper/vol34_part or /dev/mapper/mpath99p or /dev/mmcblk0p
+ device=${partition_block_device%$partition_number}
+
+ # Strip trailing partition remainders like '_part' or '-part' or 'p'
+ # if we have 'mapper' in disk device name:
+ if [[ ${partition_block_device/mapper//} != $partition_block_device ]] ; then
+ # we only expect mpath_partX or mpathpX or mpath-partX
+ case $device in
+ (*p) device=${device%p} ;;
+ (*-part) device=${device%-part} ;;
+ (*_part) device=${device%_part} ;;
+ (*) Log "Unsupported kpartx partition delimiter for $partition_block_device"
+ esac
+ fi
+
+ # For eMMC devices the trailing 'p' in the $device value
+ # (as in /dev/mmcblk0p that is derived from /dev/mmcblk0p1)
+ # needs to be stripped (to get /dev/mmcblk0), otherwise the
+ # efibootmgr call fails because of a wrong disk device name.
+ # See also https://github.com/rear/rear/issues/2103
+ if [[ $device = *'/mmcblk'+([0-9])p ]] ; then
+ device=${device%p}
+ fi
+
+ # For NVMe devices the trailing 'p' in the $device value
+ # (as in /dev/nvme0n1p that is derived from /dev/nvme0n1p1)
+ # needs to be stripped (to get /dev/nvme0n1), otherwise the
+ # efibootmgr call fails because of a wrong disk device name.
+ # See also https://github.com/rear/rear/issues/1564
+ if [[ $device = *'/nvme'+([0-9])n+([0-9])p ]] ; then
+ device=${device%p}
+ fi
+
+ test -b "$device" && echo $device
+}
+
# Returns partition start block or 'unknown'
# sda/sda1 or
# dm-XX
Reference in New Issue View Git Blame Copy Permalink