47 lines
2.7 KiB
Diff
47 lines
2.7 KiB
Diff
diff --git a/usr/share/rear/layout/save/GNU/Linux/220_lvm_layout.sh b/usr/share/rear/layout/save/GNU/Linux/220_lvm_layout.sh
|
|
index d3c9ae86..f21845df 100644
|
|
--- a/usr/share/rear/layout/save/GNU/Linux/220_lvm_layout.sh
|
|
+++ b/usr/share/rear/layout/save/GNU/Linux/220_lvm_layout.sh
|
|
@@ -70,14 +70,20 @@ local lvs_exit_code
|
|
# Get physical_device configuration.
|
|
# Format: lvmdev <volume_group> <device> [<uuid>] [<size(bytes)>]
|
|
header_printed="no"
|
|
- # Example output of "lvm pvdisplay -c":
|
|
- # /dev/sda1:system:41940992:-1:8:8:-1:4096:5119:2:5117:7wwpcO-KmNN-qsTE-7sp7-JBJS-vBdC-Zyt1W7
|
|
+ # Set pvdisplay separator to '|' to prevent issues with a colon in the path under /dev/disk/by-path
|
|
+ # that contains a ':' in the SCSI slot name.
|
|
+ # Example output of "lvm pvdisplay -C --separator '|' --noheadings --nosuffix --units=b -o pv_name,vg_name,pv_size,pv_uuid"
|
|
+ # on a system where LVM is configured to show the /dev/disk/by-path device names instead of the usual
|
|
+ # /dev/sda etc. (by using a setting like
|
|
+ # filter = [ "r|/dev/disk/by-path/.*-usb-|", "a|/dev/disk/by-path/pci-.*-nvme-|", "a|/dev/disk/by-path/pci-.*-scsi-|", "a|/dev/disk/by-path/pci-.*-ata-|", "a|/dev/disk/by-path/pci-.*-sas-|", "a|loop|", "r|.*|" ]
|
|
+ # in /etc/lvm/lvm.conf):
|
|
+ # /dev/disk/by-path/pci-0000:03:00.0-scsi-0:0:1:0-part1|system|107340627968|7wwpcO-KmNN-qsTE-7sp7-JBJS-vBdC-Zyt1W7
|
|
# There are two leading blanks in the output (at least on SLES12-SP4 with LVM 2.02.180).
|
|
- lvm pvdisplay -c | while read line ; do
|
|
+ lvm pvdisplay -C --separator '|' --noheadings --nosuffix --units=b -o pv_name,vg_name,pv_size,pv_uuid | while read line ; do
|
|
|
|
- # With the above example pdev=/dev/sda1
|
|
+ # With the above example pdev=/dev/disk/by-path/pci-0000:03:00.0-scsi-0:0:1:0-part1
|
|
# (the "echo $line" makes the leading blanks disappear)
|
|
- pdev=$( echo $line | cut -d ":" -f "1" )
|
|
+ pdev=$( echo $line | cut -d "|" -f "1" )
|
|
|
|
# Skip lines that are not describing physical devices
|
|
# i.e. lines where pdev does not start with a leading / character:
|
|
@@ -91,11 +97,11 @@ local lvs_exit_code
|
|
fi
|
|
|
|
# With the above example vgrp=system
|
|
- vgrp=$( echo $line | cut -d ":" -f "2" )
|
|
- # With the above example size=41940992
|
|
- size=$( echo $line | cut -d ":" -f "3" )
|
|
+ vgrp=$( echo $line | cut -d "|" -f "2" )
|
|
+ # With the above example size=107340627968
|
|
+ size=$( echo $line | cut -d "|" -f "3" )
|
|
# With the above example uuid=7wwpcO-KmNN-qsTE-7sp7-JBJS-vBdC-Zyt1W7
|
|
- uuid=$( echo $line | cut -d ":" -f "12" )
|
|
+ uuid=$( echo $line | cut -d "|" -f "4" )
|
|
|
|
# Translate pdev through diskbyid_mappings file:
|
|
pdev=$( get_device_mapping $pdev )
|