%define initdir /etc/rc.d/init.d %define RADVD_UID 75 Summary: A Router Advertisement daemon Name: radvd Version: 0.9.1 Release: 1 License: BSD-style Group: System Environment/Daemons Source: http://www.litech.org/radvd/radvd-%{version}.tar.gz PreReq: chkconfig, /usr/sbin/useradd, /sbin/service, initscripts BuildRoot: %{_tmppath}/%{name}-root %description radvd is the router advertisement daemon for IPv6. It listens to router solicitations and sends router advertisements as described in "Neighbor Discovery for IP Version 6 (IPv6)" (RFC 2461). With these advertisements hosts can automatically configure their addresses and some other parameters. They also can choose a default router based on these advertisements. Install radvd if you are setting up IPv6 network and/or Mobile IPv6 services. %prep %setup %build export CFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE -fPIE" export LDFLAGS='-pie -Wl,-z,relro,-z,now,-z,noexecstack,-z,nodlopen' %configure --with-pidfile=/var/run/radvd/radvd.pid make # make %{?_smp_mflags} # Parallel builds still fail because seds that transform y.tab.x into # scanner/gram.x are not executed before compile of scanner/gram.x # %install [ $RPM_BUILD_ROOT != "/" ] && rm -rf $RPM_BUILD_ROOT %makeinstall mkdir -p $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig mkdir -p $RPM_BUILD_ROOT%{initdir} mkdir -p $RPM_BUILD_ROOT/var/run/radvd install -m 644 redhat/radvd.conf.empty $RPM_BUILD_ROOT%{_sysconfdir}/radvd.conf install -m 755 redhat/radvd.init $RPM_BUILD_ROOT%{initdir}/radvd install -m 644 redhat/radvd.sysconfig $RPM_BUILD_ROOT%{_sysconfdir}/sysconfig/radvd %clean [ $RPM_BUILD_ROOT != "/" ] && rm -rf $RPM_BUILD_ROOT %postun if [ "$1" -ge "1" ]; then /sbin/service radvd condrestart >/dev/null 2>&1 fi if [ $1 = 0 ]; then /usr/sbin/userdel radvd > /dev/null 2>&1 || : fi %post /sbin/chkconfig --add radvd %preun if [ $1 = 0 ]; then /sbin/service radvd stop >/dev/null 2>&1 /sbin/chkconfig --del radvd fi %pre /usr/sbin/useradd -c "radvd user" -r -M -s /sbin/nologin -u %{RADVD_UID} -d / radvd 2>/dev/null || : %files %defattr(-,root,root) %doc COPYRIGHT README CHANGES INTRO.html TODO %config(noreplace) %{_sysconfdir}/radvd.conf %config(noreplace) /etc/sysconfig/radvd %config %{initdir}/radvd %dir %attr(-,radvd,radvd) /var/run/radvd/ %doc radvd.conf.example %{_mandir}/*/* %{_sbindir}/radvd %{_sbindir}/radvdump %changelog * Mon Jan 16 2006 Jason Vas Dias - 0.9.1-1 - Upgrade to upstream version 0.9.1 * Sun Dec 18 2005 Jason Vas Dias - Upgrade to upstream version 0.9 * Fri Dec 09 2005 Jesse Keating - rebuilt * Tue Jul 18 2005 Jason Vas Dias 0.8.2.FC5 - fix bug 163593: must use '%%configure' to get correct conf file location * Mon Jul 18 2005 Jason Vas Dias 0.8-1.FC5 - Upgrade to upstream version 0.8 * Fri Jul 8 2005 Pekka Savola 0.8-1 - 0.8. - Ship the example config file as %%doc (Red Hat's #159005) * Fri Feb 25 2005 Jason Vas Dias 0.7.3-1_FC4 - make version compare > that of FC3 * Mon Feb 21 2005 Jason Vas Dias 0.7.3-1 - Upgrade to radvd-0.7.3 - add execshield -fPIE / -pie compile / link options * Mon Feb 21 2005 Pekka Savola 0.7.3-1 - 0.7.3. * Mon Oct 28 2002 Pekka Savola - 0.7.2. * Tue May 7 2002 Pekka Savola - remove '-g %%{RADVD_GID}' when creating the user, which may be problematic if the user didn't exist before. * Fri Apr 12 2002 Bernhard Rosenkraenzer 0.7.1-1 - 0.7.1 (bugfix release, #61023), fixes: - Check that forwarding is enabled when starting radvd (helps avoid odd problems) - Check configuration file permissions (note: in setuid operation, must not be writable by the user.group) - Cleanups and enhancements for radvdump - Ensure NULL-termination with strncpy even with overlong strings (non-criticals, but better safe than sorry) - Update config.{guess,sub} to cope with some newer architectures - Minor fixes and cleanups * Wed Jan 14 2002 Pekka Savola - 0.7.1. * Wed Jan 09 2002 Tim Powers - automated rebuild * Tue Jan 8 2002 Pekka Savola - Change 'reload' to signal HUP to radvd instead or restarting. * Fri Dec 28 2001 Pekka Savola - License unfortunately is BSD *with* advertising clause, so to be pedantic, change License: to 'BSD-style'. * Thu Nov 22 2001 Bernhard Rosenkraenzer - 0.7.0 * Wed Nov 14 2001 Pekka Savola - spec file cleanups - update to 0.7.0. * Mon Jul 9 2001 Bernhard Rosenkraenzer - initial Red Hat Linux build * Sun Jun 24 2001 Pekka Savola - add a patch from USAGI for overflow, Copyright -> License. * Wed Jun 20 2001 Pekka Savola - use /sbin/service. - update to 0.6.2pl4. * Sat Apr 28 2001 Pekka Savola - update to 0.6.2pl3. * Wed Apr 11 2001 Pekka Savola - update to 0.6.2pl2. * Wed Apr 4 2001 Pekka Savola - update to 0.62pl1. Bye bye patches! - Require: initscripts (should really be with a version providing IPv6) - clean up the init script, make condrestart work properly - Use a static /etc/rc.d/init.d; init.d/radvd required it anyway. * Sun Apr 1 2001 Pekka Savola - add patch to chroot (doesn't work well yet, as /proc is used directly) - clean up droproot patch, drop the rights earlier; require user-writable pidfile directory - set up the pidfile directory at compile time. * Sat Mar 31 2001 Pekka Savola - add select/kill signals patch from Nathan Lutchansky . - add address syntax checked fix from Marko Myllynen . - add patch to check the pid file before fork. - add support for OPTIONS sourced from /etc/sysconfig/radvd, provide a nice default one. - add/delete radvd user, change the pidfile to /var/run/radvd/radvd.pid. - fix initscript NETWORKING_IPV6 check. * Sun Mar 18 2001 Pekka Savola - add droproot patch, change to nobody by default (should use radvd:radvd or the like, really). * Mon Mar 5 2001 Tim Powers - applied patch supplied by Pekka Savola in #30508 - made changes to initscript as per Pekka's suggestions * Thu Feb 15 2001 Tim Powers - needed -D_GNU_SOURCE to build properly * Tue Feb 6 2001 Tim Powers - use %%configure and %%makeinstall, just glob the manpages, cleans things up - fixed initscript so that it can be internationalized in the future * Fri Feb 2 2001 Pekka Savola - Create a single package(source) for glibc21 and glibc22 (automatic Requires can handle this just fine). - use %%{_mandir} and friends - add more flesh to %doc - streamline %config file %attrs - streamline init.d file a bit: * add a default chkconfig: (default to disable for security etc. reasons; also, the default config isn't generic enough..) * add reload/condrestart * minor tweaks * missing: localization support (initscripts-5.60) - use %%initdir macro * Thu Feb 1 2001 Lars Fenneberg - updated to new release 0.6.2 * Thu Feb 1 2001 Marko Myllynen - initial version, radvd version 0.6.1