New version 3.8.0
- Require libblockdev 3.0 when importing from GI (vtrefny) - spec: Bump required version of libblockdev to 3.0 (vtrefny) - md: Adapt libblockdev 3.0 mdraid bitmap arg changes (tbzatek) - spec: Bump release to 99 to be always ahead of Fedora in nightly (vtrefny) - ci: Run GH actions tests in a Fedora container (vtrefny) - Add new LUKS tests for add/remove key and key file usage (vtrefny) - Adjust to the new libblockdev 3.0 crypto API (vtrefny) - Adjust to libblockdev 3.0 API changes (vtrefny) - blivet: Enable the extended node bitmap for F2FS (akoskovich) - Remove all state-dependent objects when resetting Blivet DBus object. (dlehman) - Run callbacks when pruning actions. (dlehman) - Always prefer GPT disk labels on x86_64 (and clean up the logic) (awilliam) - Do not add new PVs to the LVM devices file if it doesn't exist and VGs are present (vtrefny) - Add RISCV64 architecture helper [is_riscv64()] for arch module. (48907457+nirousseau) - iscsi: Extend allowed CHAP auth algorithms (tbzatek) - Fix checking FIPS mode when /proc/sys/crypto/fips_enabled doesn't exist (vtrefny) - Fix creating LUKS1 on disks with mixed sector size (#2188785) (vtrefny) - Do not set memory limit for LUKS2 when running in FIPS mode (vtrefny) - Revert "tests: Skip test_lvcreate_type on CentOS/RHEL 9" (vtrefny) - DBus: remove extra callback invocations (dlehman) - Add a test case for filesystem online resize (vtrefny) - Add support for filesystem online resize (vtrefny) - iscsi: Use UDisks instead of storaged in the availability message (vtrefny) - tests: Fix skipping iSCSI tests if UDisks iSCSI isn't available (vtrefny) - Add ChangeLog to .gitignore (vtrefny) - Makefile cleanup (vtrefny) - ci: Use Packit for daily builds in Copr (vtrefny) - Avoid raising libblockdev exceptions from our code (vtrefny) - ci: Fix Packit configuration (vtrefny) - Add support for specifying stripe size for RAID LVs (vtrefny) - tests: Use blivet-specific prefix for targetcli backing files (vtrefny) - Add a basic test case for the iscsi module (vtrefny) - Allow changing iSCSI initiator name after setting it (vtrefny) - Prefer UUID for fstab spec for DM devices too (vtrefny) - Remove support for Python 2 from spec and Makefile (vtrefny)
This commit is contained in:
Vojtech Trefny
parent
3dc0932689
commit
ff8048d8b5
2
.gitignore
vendored
2
.gitignore
vendored
@ -153,3 +153,5 @@
|
||||
/blivet-3.7.0.tar.gz
|
||||
/blivet-3.7.1.tar.gz
|
||||
/blivet-3.7.1-tests.tar.gz
|
||||
/blivet-3.8.0-tests.tar.gz
|
||||
/blivet-3.8.0.tar.gz
|
||||
|
||||
@ -1,29 +1,11 @@
|
||||
%define is_rhel 0%{?rhel} != 0
|
||||
|
||||
# python3 is not available on RHEL <=7
|
||||
%if %{is_rhel} && 0%{?rhel} <= 7
|
||||
# disable python3 by default
|
||||
%bcond_with python3
|
||||
%else
|
||||
%bcond_without python3
|
||||
%endif
|
||||
|
||||
# python2 is not available on RHEL > 7 and not needed on Fedora > 28
|
||||
%if 0%{?rhel} > 7 || 0%{?fedora} > 28
|
||||
# disable python2 by default
|
||||
%bcond_with python2
|
||||
%else
|
||||
%bcond_without python2
|
||||
%endif
|
||||
|
||||
Summary: A python module for system storage configuration
|
||||
Name: python-blivet
|
||||
Url: https://storageapis.wordpress.com/projects/blivet
|
||||
Version: 3.7.1
|
||||
Version: 3.8.0
|
||||
|
||||
#%%global prerelease .b2
|
||||
# prerelease, if defined, should be something like .a1, .b1, .b2.dev1, or .c2
|
||||
Release: 5%{?prerelease}%{?dist}
|
||||
Release: 1%{?prerelease}%{?dist}
|
||||
Epoch: 1
|
||||
License: LGPL-2.1-or-later
|
||||
%global realname blivet
|
||||
@ -35,16 +17,12 @@ Source1: http://github.com/storaged-project/blivet/archive/%{realname}-%{realver
|
||||
Patch0: 0001-remove-btrfs-plugin.patch
|
||||
%endif
|
||||
|
||||
Patch1: 0002-Add-support-for-specifying-stripe-size-for-RAID-LVs.patch
|
||||
Patch2: 0003-Add-support-for-filesystem-online-resize.patch
|
||||
Patch3: 0004-Always-prefer-GPT-disk-labels-on-x86_64-and-clean-up.patch
|
||||
|
||||
# Versions of required components (done so we make sure the buildrequires
|
||||
# match the requires versions of things).
|
||||
%global partedver 1.8.1
|
||||
%global pypartedver 3.10.4
|
||||
%global utillinuxver 2.15.1
|
||||
%global libblockdevver 2.24
|
||||
%global libblockdevver 3.0
|
||||
%global libbytesizever 0.3
|
||||
%global pyudevver 0.18
|
||||
|
||||
@ -67,7 +45,6 @@ Conflicts: python3-blivet < 1:2.0.0
|
||||
The %{realname}-data package provides data files required by the %{realname}
|
||||
python module.
|
||||
|
||||
%if %{with python3}
|
||||
%package -n python3-%{realname}
|
||||
Summary: A python3 package for examining and modifying storage configuration.
|
||||
|
||||
@ -106,76 +83,19 @@ Requires: %{realname}-data = %{epoch}:%{version}-%{release}
|
||||
|
||||
Obsoletes: blivet-data < 1:2.0.0
|
||||
|
||||
%if %{without python2}
|
||||
Obsoletes: python2-blivet < 1:2.0.2-2
|
||||
Obsoletes: python-blivet < 1:2.0.2-2
|
||||
%else
|
||||
Obsoletes: python-blivet < 1:2.0.0
|
||||
%endif
|
||||
|
||||
%description -n python3-%{realname}
|
||||
The python3-%{realname} is a python3 package for examining and modifying storage
|
||||
configuration.
|
||||
%endif
|
||||
|
||||
%if %{with python2}
|
||||
%package -n python2-%{realname}
|
||||
Summary: A python2 package for examining and modifying storage configuration.
|
||||
|
||||
%{?python_provide:%python_provide python2-%{realname}}
|
||||
|
||||
BuildRequires: gettext
|
||||
BuildRequires: python2-devel
|
||||
BuildRequires: python2-setuptools
|
||||
|
||||
Requires: python2
|
||||
Requires: python2-six
|
||||
Requires: python2-pyudev >= %{pyudevver}
|
||||
Requires: parted >= %{partedver}
|
||||
Requires: python2-pyparted >= %{pypartedver}
|
||||
Requires: python2-libselinux
|
||||
Requires: python2-blockdev >= %{libblockdevver}
|
||||
Recommends: libblockdev-btrfs >= %{libblockdevver}
|
||||
Recommends: libblockdev-crypto >= %{libblockdevver}
|
||||
Recommends: libblockdev-dm >= %{libblockdevver}
|
||||
Recommends: libblockdev-fs >= %{libblockdevver}
|
||||
Recommends: libblockdev-kbd >= %{libblockdevver}
|
||||
Recommends: libblockdev-loop >= %{libblockdevver}
|
||||
Recommends: libblockdev-lvm >= %{libblockdevver}
|
||||
Recommends: libblockdev-mdraid >= %{libblockdevver}
|
||||
Recommends: libblockdev-mpath >= %{libblockdevver}
|
||||
Recommends: libblockdev-nvdimm >= %{libblockdevver}
|
||||
Recommends: libblockdev-part >= %{libblockdevver}
|
||||
Recommends: libblockdev-swap >= %{libblockdevver}
|
||||
Recommends: libblockdev-s390 >= %{libblockdevver}
|
||||
Requires: python2-bytesize >= %{libbytesizever}
|
||||
Requires: util-linux >= %{utillinuxver}
|
||||
Requires: lsof
|
||||
Requires: python2-hawkey
|
||||
Requires: %{realname}-data = %{epoch}:%{version}-%{release}
|
||||
|
||||
Requires: systemd-udev
|
||||
Requires: python2-gobject-base
|
||||
|
||||
Obsoletes: blivet-data < 1:2.0.0
|
||||
Obsoletes: python-blivet < 1:2.0.0
|
||||
|
||||
%description -n python2-%{realname}
|
||||
The python2-%{realname} is a python2 package for examining and modifying storage
|
||||
configuration.
|
||||
%endif
|
||||
|
||||
%prep
|
||||
%autosetup -n %{realname}-%{realversion} -N
|
||||
%autosetup -n %{realname}-%{realversion} -b1 -p1
|
||||
|
||||
%build
|
||||
%{?with_python2:make PYTHON=%{__python2}}
|
||||
%{?with_python3:make PYTHON=%{__python3}}
|
||||
make
|
||||
|
||||
%install
|
||||
%{?with_python2:make PYTHON=%{__python2} DESTDIR=%{buildroot} install}
|
||||
%{?with_python3:make PYTHON=%{__python3} DESTDIR=%{buildroot} install}
|
||||
make DESTDIR=%{buildroot} install
|
||||
|
||||
%find_lang %{realname}
|
||||
|
||||
@ -185,21 +105,50 @@ configuration.
|
||||
%{_libexecdir}/*
|
||||
%{_unitdir}/*
|
||||
|
||||
%if %{with python2}
|
||||
%files -n python2-%{realname}
|
||||
%license COPYING
|
||||
%doc README.md ChangeLog examples
|
||||
%{python2_sitelib}/*
|
||||
%endif
|
||||
|
||||
%if %{with python3}
|
||||
%files -n python3-%{realname}
|
||||
%license COPYING
|
||||
%doc README.md ChangeLog examples
|
||||
%{python3_sitelib}/*
|
||||
%endif
|
||||
|
||||
%changelog
|
||||
* Thu Jun 29 2023 Vojtech Trefny <vtrefny@redhat.com> - 3.8.0-1
|
||||
- Revert "Makefile cleanup" (blivet-ci)
|
||||
- Require libblockdev 3.0 when importing from GI (vtrefny)
|
||||
- spec: Bump required version of libblockdev to 3.0 (vtrefny)
|
||||
- md: Adapt libblockdev 3.0 mdraid bitmap arg changes (tbzatek)
|
||||
- spec: Bump release to 99 to be always ahead of Fedora in nightly (vtrefny)
|
||||
- ci: Run GH actions tests in a Fedora container (vtrefny)
|
||||
- Add new LUKS tests for add/remove key and key file usage (vtrefny)
|
||||
- Adjust to the new libblockdev 3.0 crypto API (vtrefny)
|
||||
- Adjust to libblockdev 3.0 API changes (vtrefny)
|
||||
- blivet: Enable the extended node bitmap for F2FS (akoskovich)
|
||||
- Remove all state-dependent objects when resetting Blivet DBus object. (dlehman)
|
||||
- Run callbacks when pruning actions. (dlehman)
|
||||
- Always prefer GPT disk labels on x86_64 (and clean up the logic) (awilliam)
|
||||
- Do not add new PVs to the LVM devices file if it doesn't exist and VGs are present (vtrefny)
|
||||
- Add RISCV64 architecture helper [is_riscv64()] for arch module. (48907457+nirousseau)
|
||||
- iscsi: Extend allowed CHAP auth algorithms (tbzatek)
|
||||
- Fix checking FIPS mode when /proc/sys/crypto/fips_enabled doesn't exist (vtrefny)
|
||||
- Fix creating LUKS1 on disks with mixed sector size (#2188785) (vtrefny)
|
||||
- Do not set memory limit for LUKS2 when running in FIPS mode (vtrefny)
|
||||
- Revert "tests: Skip test_lvcreate_type on CentOS/RHEL 9" (vtrefny)
|
||||
- DBus: remove extra callback invocations (dlehman)
|
||||
- Add a test case for filesystem online resize (vtrefny)
|
||||
- Add support for filesystem online resize (vtrefny)
|
||||
- iscsi: Use UDisks instead of storaged in the availability message (vtrefny)
|
||||
- tests: Fix skipping iSCSI tests if UDisks iSCSI isn't available (vtrefny)
|
||||
- Add ChangeLog to .gitignore (vtrefny)
|
||||
- Makefile cleanup (vtrefny)
|
||||
- ci: Use Packit for daily builds in Copr (vtrefny)
|
||||
- Avoid raising libblockdev exceptions from our code (vtrefny)
|
||||
- ci: Fix Packit configuration (vtrefny)
|
||||
- Add support for specifying stripe size for RAID LVs (vtrefny)
|
||||
- tests: Use blivet-specific prefix for targetcli backing files (vtrefny)
|
||||
- Add a basic test case for the iscsi module (vtrefny)
|
||||
- Allow changing iSCSI initiator name after setting it (vtrefny)
|
||||
- Prefer UUID for fstab spec for DM devices too (vtrefny)
|
||||
- Remove support for Python 2 from spec and Makefile (vtrefny)
|
||||
|
||||
* Tue Jun 13 2023 Python Maint <python-maint@redhat.com> - 1:3.7.1-5
|
||||
- Rebuilt for Python 3.12
|
||||
|
||||
|
||||
4
sources
4
sources
@ -1,2 +1,2 @@
|
||||
SHA512 (blivet-3.7.1.tar.gz) = 2a4f17e3551e24f78d2975bbe9fa21a57026f643a38e1fcd5d5ce8927cc7f224d4df68c2f23e99087be0a10459e4c1f758332cab70ee1fcab477f8dcf2e4c4ac
|
||||
SHA512 (blivet-3.7.1-tests.tar.gz) = a3561f972962f6aad3f2ea4ad88f5e307c68fefb4d742085130cf4f232cd6d924f59ae06df602017542a83a1164ad7356b5518e8c3d07d07ab31880f94421db7
|
||||
SHA512 (blivet-3.8.0-tests.tar.gz) = da0b4f68615a77b499ea4f5e192c4f22a15331e1e27a79d1a1a147dfc2dcefc4b18c641ab299e91b86ccdd29cf6c39bcb85a1c9e53bb606a7da4c5564e73f25e
|
||||
SHA512 (blivet-3.8.0.tar.gz) = 25686e77ebf4feed887929ac33494012d4e36b20e04500c9e882fac357688622f4d54df25345bae087b6be4df3a9312818f1451fab643b3006b43fdc9b81ccd4
|
||||
|
||||
Loading…
Reference in New Issue
Block a user