RHEL 9.0.0 Alpha bootstrap

The content of this branch was automatically imported from Fedora ELN
with the following as its source:
https://src.fedoraproject.org/rpms/pykickstart#361fdfce5085632f7e66599cfc5e35be2002cf65

.gitignore

@@ -0,0 +1,214 @@
+pykickstart-1.11.tar.gz
+pykickstart-1.12.tar.gz
+pykickstart-1.13.tar.gz
+pykickstart-1.14.tar.gz
+pykickstart-1.15.tar.gz
+pykickstart-1.16.tar.gz
+pykickstart-1.17.tar.gz
+pykickstart-1.18.tar.gz
+pykickstart-1.19.tar.gz
+pykickstart-1.20.tar.gz
+pykickstart-1.21.tar.gz
+pykickstart-1.22.tar.gz
+pykickstart-1.23.tar.gz
+pykickstart-1.24.tar.gz
+pykickstart-1.25.tar.gz
+pykickstart-1.26.tar.gz
+pykickstart-1.27.tar.gz
+pykickstart-1.28.tar.gz
+pykickstart-1.29.tar.gz
+pykickstart-1.30.tar.gz
+pykickstart-1.31.tar.gz
+pykickstart-1.32.tar.gz
+pykickstart-1.33.tar.gz
+pykickstart-1.34.tar.gz
+pykickstart-1.35.tar.gz
+pykickstart-1.36.tar.gz
+pykickstart-1.37.tar.gz
+pykickstart-1.38.tar.gz
+pykickstart-1.39.tar.gz
+pykickstart-1.40.tar.gz
+pykickstart-1.41.tar.gz
+pykickstart-1.42.tar.gz
+pykickstart-1.43.tar.gz
+pykickstart-1.44.tar.gz
+pykickstart-1.45.tar.gz
+pykickstart-1.46.tar.gz
+pykickstart-1.47.tar.gz
+pykickstart-1.48.tar.gz
+pykickstart-1.49.tar.gz
+pykickstart-1.50.tar.gz
+pykickstart-1.51.tar.gz
+pykickstart-1.52.tar.gz
+pykickstart-1.53.tar.gz
+pykickstart-1.55.tar.gz
+pykickstart-1.56.tar.gz
+pykickstart-1.57.tar.gz
+pykickstart-1.58.tar.gz
+pykickstart-1.59.tar.gz
+pykickstart-1.60.tar.gz
+pykickstart-1.61.tar.gz
+pykickstart-1.62.tar.gz
+pykickstart-1.63.tar.gz
+pykickstart-1.64.tar.gz
+pykickstart-1.65.tar.gz
+pykickstart-1.66.tar.gz
+pykickstart-1.67.tar.gz
+pykickstart-1.68.tar.gz
+pykickstart-1.69.tar.gz
+pykickstart-1.70.tar.gz
+pykickstart-1.71.tar.gz
+pykickstart-1.72.tar.gz
+pykickstart-1.73.tar.gz
+pykickstart-1.74.tar.gz
+pykickstart-1.75.tar.gz
+pykickstart-1.76.tar.gz
+pykickstart-1.77.tar.gz
+pykickstart-1.78.tar.gz
+/pykickstart-1.78.tar.gz
+/pykickstart-1.79.tar.gz
+/pykickstart-1.80.tar.gz
+/pykickstart-1.81.tar.gz
+/pykickstart-1.82.tar.gz
+/pykickstart-1.83.tar.gz
+/pykickstart-1.99.0.tar.gz
+/pykickstart-1.99.1.tar.gz
+/pykickstart-1.99.2.tar.gz
+/pykickstart-1.99.3.tar.gz
+/pykickstart-1.99.4.tar.gz
+/pykickstart-1.99.5.tar.gz
+/pykickstart-1.99.6.tar.gz
+/pykickstart-1.99.7.tar.gz
+/pykickstart-1.99.8.tar.gz
+/pykickstart-1.99.9.tar.gz
+/pykickstart-1.99.10.tar.gz
+/pykickstart-1.99.11.tar.gz
+/pykickstart-1.99.12.tar.gz
+/pykickstart-1.99.13.tar.gz
+/pykickstart-1.99.14.tar.gz
+/pykickstart-1.99.15.tar.gz
+/pykickstart-1.99.16.tar.gz
+/pykickstart-1.99.17.tar.gz
+/pykickstart-1.99.18.tar.gz
+/pykickstart-1.99.19.tar.gz
+/pykickstart-1.99.20.tar.gz
+/pykickstart-1.99.21.tar.gz
+/pykickstart-1.99.22.tar.gz
+/pykickstart-1.99.23.tar.gz
+/pykickstart-1.99.24.tar.gz
+/pykickstart-1.99.25.tar.gz
+/pykickstart-1.99.26.tar.gz
+/pykickstart-1.99.27.tar.gz
+/pykickstart-1.99.28.tar.gz
+/pykickstart-1.99.29.tar.gz
+/pykickstart-1.99.30.tar.gz
+/pykickstart-1.99.31.tar.gz
+/pykickstart-1.99.32.tar.gz
+/pykickstart-1.99.33.tar.gz
+/pykickstart-1.99.34.tar.gz
+/pykickstart-1.99.35.tar.gz
+/pykickstart-1.99.36.tar.gz
+/pykickstart-1.99.37.tar.gz
+/pykickstart-1.99.38.tar.gz
+/pykickstart-1.99.39.tar.gz
+/pykickstart-1.99.40.tar.gz
+/pykickstart-1.99.41.tar.gz
+/pykickstart-1.99.42.tar.gz
+/pykickstart-1.99.43.tar.gz
+/pykickstart-1.99.44.tar.gz
+/pykickstart-1.99.45.tar.gz
+/pykickstart-1.99.46.tar.gz
+/pykickstart-1.99.47.tar.gz
+/pykickstart-1.99.48.tar.gz
+/pykickstart-1.99.49.tar.gz
+/pykickstart-1.99.50.tar.gz
+/pykickstart-1.99.51.tar.gz
+/pykickstart-1.99.52.tar.gz
+/pykickstart-1.99.53.tar.gz
+/pykickstart-1.99.54.tar.gz
+/pykickstart-1.99.55.tar.gz
+/pykickstart-1.99.56.tar.gz
+/pykickstart-1.99.57.tar.gz
+/pykickstart-1.99.58.tar.gz
+/pykickstart-1.99.59.tar.gz
+/pykickstart-1.99.60.tar.gz
+/pykickstart-1.99.61.tar.gz
+/pykickstart-1.99.62.tar.gz
+/pykickstart-1.99.63.tar.gz
+/pykickstart-1.99.64.tar.gz
+/pykickstart-1.99.65.tar.gz
+/pykickstart-1.99.66.tar.gz
+/pykickstart-2.0.tar.gz
+/pykickstart-2.1.tar.gz
+/pykickstart-2.2.tar.gz
+/pykickstart-2.4.tar.gz
+/pykickstart-2.5.tar.gz
+/pykickstart-2.6.tar.gz
+/pykickstart-2.7.tar.gz
+/pykickstart-2.8.tar.gz
+/pykickstart-2.9.tar.gz
+/pykickstart-2.10.tar.gz
+/pykickstart-2.11.tar.gz
+/pykickstart-2.12.tar.gz
+/pykickstart-2.13.tar.gz
+/pykickstart-2.14.tar.gz
+/pykickstart-2.15.tar.gz
+/pykickstart-2.16.tar.gz
+/pykickstart-2.17.tar.gz
+/pykickstart-2.18.tar.gz
+/pykickstart-2.19.tar.gz
+/pykickstart-2.20.tar.gz
+/pykickstart-2.21.tar.gz
+/pykickstart-2.22.tar.gz
+/pykickstart-2.23.tar.gz
+/pykickstart-2.24.tar.gz
+/pykickstart-2.25.tar.gz
+/pykickstart-2.26.tar.gz
+/pykickstart-2.27.tar.gz
+/pykickstart-2.28.tar.gz
+/pykickstart-2.29.tar.gz
+/pykickstart-2.30.tar.gz
+/pykickstart-2.31.tar.gz
+/pykickstart-2.32.tar.gz
+/pykickstart-2.33.tar.gz
+/pykickstart-2.34.tar.gz
+/pykickstart-2.35.tar.gz
+/pykickstart-2.36.tar.gz
+/pykickstart-2.37.tar.gz
+/pykickstart-2.39.tar.gz
+/pykickstart-2.40.tar.gz
+/pykickstart-2.41.tar.gz
+/pykickstart-2.42.tar.gz
+/pykickstart-2.43.tar.gz
+/pykickstart-2.44.tar.gz
+/pykickstart-3.10.tar.gz
+/pykickstart-3.11.tar.gz
+/pykickstart-3.12.tar.gz
+/pykickstart-3.13.tar.gz
+/pykickstart-3.14.tar.gz
+/pykickstart-3.15.tar.gz
+/pykickstart-3.16.tar.gz
+/pykickstart-3.17.tar.gz
+/pykickstart-3.18.tar.gz
+/pykickstart-3.19.tar.gz
+/pykickstart-3.19.tar.gz.asc
+/pykickstart-3.20.tar.gz
+/pykickstart-3.20.tar.gz.asc
+/pykickstart-3.21.tar.gz
+/pykickstart-3.21.tar.gz.asc
+/pykickstart-3.22.tar.gz
+/pykickstart-3.22.tar.gz.asc
+/pykickstart-3.23.tar.gz
+/pykickstart-3.23.tar.gz.asc
+/pykickstart-3.24.tar.gz
+/pykickstart-3.24.tar.gz.asc
+/pykickstart-3.25.tar.gz
+/pykickstart-3.25.tar.gz.asc
+/pykickstart-3.26.tar.gz
+/pykickstart-3.26.tar.gz.asc
+/pykickstart-3.27.tar.gz
+/pykickstart-3.27.tar.gz.asc
+/pykickstart-3.28.tar.gz
+/pykickstart-3.28.tar.gz.asc
+/pykickstart-3.29.tar.gz
+/pykickstart-3.29.tar.gz.asc

gating.yaml

@@ -0,0 +1,6 @@
+--- !Policy
+product_versions:
+  - fedora-*
+decision_context: bodhi_update_push_testing
+rules:
+  - !PassingTestCaseRule {test_case_name: dist.depcheck}

pykickstart.spec

@@ -0,0 +1,705 @@
+# Disable tests by default because they fail to run inside mock builds
+# at the moment, but can run locally.  To build and run tests, do:
+#     rpmbuild -ba --with runtests pykickstart.spec
+%bcond_with runtests
+
+Name:      pykickstart
+Version:   3.29
+Release:   1%{?dist}
+License:   GPLv2 and MIT
+Summary:   Python utilities for manipulating kickstart files.
+Url:       http://fedoraproject.org/wiki/pykickstart
+# This is a Red Hat maintained package which is specific to
+# our distribution.  Thus the source is only available from
+# within this srpm.
+Source0:   %{name}-%{version}.tar.gz
+Source1:   %{name}-%{version}.tar.gz.asc
+
+BuildArch: noarch
+
+BuildRequires: gettext
+BuildRequires: python3-coverage
+BuildRequires: python3-devel
+BuildRequires: python3-requests
+BuildRequires: python3-setuptools
+BuildRequires: python3-six
+BuildRequires: python3-sphinx
+
+Requires: python3-kickstart = %{version}-%{release}
+
+%description
+Python utilities for manipulating kickstart files.
+
+%package -n python3-kickstart
+Summary:  Python 3 library for manipulating kickstart files.
+Requires: python3-six
+Requires: python3-requests
+
+%description -n python3-kickstart
+Python 3 library for manipulating kickstart files.  The binaries are found in
+the pykickstart package.
+
+%prep
+%setup -q
+
+%build
+make PYTHON=%{__python3}
+
+%install
+make PYTHON=%{__python3} DESTDIR=%{buildroot} install
+
+%check
+%if %{with runtests}
+make PYTHON=%{__python3} test
+%endif
+
+%files
+%license COPYING
+%doc README.rst
+%doc data/kickstart.vim
+%{_bindir}/ksvalidator
+%{_bindir}/ksflatten
+%{_bindir}/ksverdiff
+%{_bindir}/ksshell
+%{_mandir}/man1/ksflatten.1.gz
+%{_mandir}/man1/ksshell.1.gz
+%{_mandir}/man1/ksvalidator.1.gz
+%{_mandir}/man1/ksverdiff.1.gz
+
+%files -n python3-kickstart
+%doc docs/2to3
+%doc docs/programmers-guide
+%doc docs/kickstart-docs.txt
+%{python3_sitelib}/pykickstart
+%{python3_sitelib}/pykickstart*.egg-info
+
+%changelog
+* Mon Aug 31 2020 Brian C. Lane <bcl@redhat.com> - 3.29-1
+- setup.py: Fix script installation without filename extension (bcl)
+
+* Mon Aug 31 2020 Brian C. Lane <bcl@redhat.com> - 3.28-1
+- Makefile: Add __init__.py with new version to bumpver commit (bcl)
+- tests: Ignore W0707 raise-missing-from warnings (bcl)
+- Add Fedora 34 support (bcl)
+- Add new tests for the harddrive biospart parameter removal (jkonecny)
+- Remove biospart from harddrive command (jkonecny)
+- move dependencies into setup.py and use setuptools (carlos)
+- remove reference to py3 as a requirement (carlos)
+- remove references to nose test framework (carlos)
+- update dist to 18.04 (carlos)
+- add ci test for future py ver (carlos)
+- use new travis-ci syntax (carlos)
+- parser: Remove OrderedSet (bcl)
+- tests: Add a slightly different test for Package.add (bcl)
+- Add pykickstart.__version__ string (bcl)
+
+* Tue Jul 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 3.27-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
+
+* Tue Jul 07 2020 Brian C. Lane <bcl@redhat.com> - 3.27-1
+- tests: Fix pylint warnings in timezone tests (bcl)
+- Mark --ntpservers and --nontp options of timezone command as deprecated (mkolman)
+- Add the timesource command (mkolman)
+
+* Mon Jun 01 2020 Brian C. Lane <bcl@redhat.com> - 3.26-1
+- Makefile: Fix gpg signature (bcl)
+- Add RHEL8_Repo, RHEL8_RepoData, and RHEL8_Url classes (bcl)
+- pylint: Fix warnings and errors from pylint 2.5.x (bcl)
+- i18n: Use gettext instead of lgettext (bcl)
+- Use W9902 in pylint disable to avoid warnings about _ (bcl)
+- Add python 3.8 to travis.yml (bcl)
+- docs: Fix network.py documentation markup (bcl)
+- docs: versionadded directive needs a blank line after it (bcl)
+- docs: Maintain programmers-guide in the repo (bcl)
+- Makefile: Add creating the detached signature to the release make target (bcl)
+
+* Sat May 23 2020 Miro Hrončok <mhroncok@redhat.com> - 3.25-2
+- Rebuilt for Python 3.9
+
+* Tue Apr 07 2020 Brian C. Lane <bcl@redhat.com> - 3.25-1
+- Deprecate `repo --ignoregroups` (jkonecny)
+- Add Fedora 33 support (jkonecny)
+
+* Mon Apr 06 2020 Brian C. Lane <bcl@redhat.com> - 3.24-1
+- Make --url doctext more understandable (jkonecny)
+- Remove url command doc that it's replaced (jkonecny)
+- Add missing information for driverdisk KS command (jkonecny)
+- tests: close the HTTP Server in tests/include.py (bcl)
+- tests: Replace nose with unittest (bcl)
+
+* Thu Jan 30 2020 Fedora Release Engineering <releng@fedoraproject.org> - 3.23-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
+
+* Tue Jan 14 2020 Brian C. Lane <bcl@redhat.com> - 3.23-1
+- tests: pin coverage at the 4.x.x series (bcl)
+- Switch to using Weblate for translations (bcl)
+- po: Remove pykickstart.pot (bcl)
+- gpg sign the git tag (bcl)
+- Cleaning up empty help strings (bcl)
+- tests: Fix the empty description, help, etc. test (bcl)
+- tests: Turn off HTTP logging in Include_URL_TestCase (bcl)
+- tests: Catch warning in Unknown_New_Section_2_TestCase (bcl)
+- tests: Capture stderr output from ksflatten test (bcl)
+- Prefer --utc to --isUtc in timezone for F32 and later (vslavik)
+- Give output in str(F25_Timezone) even without timezone spec (vslavik)
+- Prefer the non-camelCased options for %packages (vslavik)
+- Add test for kickstart option names (vslavik)
+- Add lowercase aliases for camelCased %packages options (vslavik)
+- Commit the new pykickstart.pot when making a release (bcl)
+- Add the rhsm command (mkolman)
+- Fix travis and coverage runs (bcl)
+- Fix pylint unnecessary-pass warnings (bcl)
+- Drop python2 compatibility (jkonecny)
+- Fix check for python zanata client in Makefile (jkonecny)
+- Update versionremoved sphinx extension (bcl)
+
+* Wed Nov 06 2019 Brian C. Lane <bcl@redhat.com> - 3.22-1
+- Enable coveralls.io coverage tracking (bcl)
+- Add tests for ignorebroken packages parameter (jkonecny)
+- Add ignore broken parameter to packages section (#1642013) (jkonecny)
+- Add support for the ZIPL Secure Boot for F32 and RHEL8 (vponcova)
+- Add F32 support (jkonecny)
+- Add note for the repo and url ssl options (jkonecny)
+- Skip FailsToOpenOutputFile_TestCase if running as root (juliana.rodrigueiro)
+- Change .spec Source to new pykickstart organization URL (bcl)
+
+* Thu Oct 03 2019 Miro Hrončok <mhroncok@redhat.com> - 3.21-3
+- Rebuilt for Python 3.8.0rc1 (#1748018)
+
+* Fri Aug 16 2019 Miro Hrončok <mhroncok@redhat.com> - 3.21-2
+- Rebuilt for Python 3.8
+
+* Wed Aug 14 2019 David Cantrell <dcantrell@redhat.com> - 3.21-1
+- Make module --disable available on Fedora 31+ (mkolman)
+- Add F31 handler (mkolman)
+- Add the --disable option for the module command (#1719347) (mkolman)
+- A couple fixes for %packaging section docs (mkolman)
+- Fix the docs generation (vponcova)
+- Fix the documentation of bootloader --append (vponcova)
+- Just kidding, use xenial for everything. (dcantrel)
+- Python 3.7 is only available in 'xenial' in Travis-CI (dcantrel)
+- Reduce .travis.yml to Python 3.{5,6,7}, set SPHINXAPIDOC (dcantrel)
+- Replace PYTHONPATH override with sys.path.append; allow
+  SPHINXAPIDOC (dcantrel)
+- Add rhel7-branch to .travis.yml (dcantrel)
+- Restrict the branches to test with Python 3. (dcantrel)
+- More changes to .travis.yml, add requirements.txt file (dcantrel)
+- Update the Travis-CI yaml file. (dcantrel)
+- Fix documentation for the --excludepkgs and --includepkgs repo
+  options (mkolman)
+- packit.yml: remove unused content (ttomecek)
+- Update sed in pykistart.spec Makefile target (phracek)
+- Add pykickstart.spec.in for packit (phracek)
+- Make %packages --default attribute sane (jkonecny)
+- Configuration file .packit.yaml (phracek)
+- For Travis-CI, explicitly use Sphinx 1.7.6 (dcantrel)
+- Change to unittest.skipUnless and use correct syntax. (dcantrel)
+- Replace 'import unittest.skipIf as skipIf' with
+  just 'import unittest' (dcantrel)
+- s/unittest/pytest/g in .travis.yml (dcantrel)
+- pip install unittest for the Travis-CI runs (dcantrel)
+- Run 'git checkout' in the Makefile ignoring non-fatal errors (dcantrel)
+- Skip KS_With_Wrong_Permissions_TestCase if running as root. (dcantrel)
+- Treat pylint warnings as non-fatal, exit codes 0 and 4. (dcantrel)
+- Remove unused falsePositives in runpylint.py (dcantrel)
+- Use env to set NOSE_IGNORE_CONFIG_FILES (dcantrel)
+- Add NOSE_IGNORE_CONFIG_FILES=y to the .travis.yml file (dcantrel)
+- Set NOSE_IGNORE_CONFIG_FILES in make coverage (dcantrel)
+- In the Travis-CI environment, coverage is 'coverage' (dcantrel)
+- Close output_path after reading in ksflatten.py (dcantrel)
+- Makefile improvements (dcantrel)
+- Specify Python 3.7 in .travis.yml per the docs. (dcantrel)
+- Run sphinx-build and sphinx-apidoc from docs/Makefile (dcantrel)
+- Add some missing help strings as detected by the coverage target. (dcantrel)
+- Add missing descriptions to a handful of pykickstart commands. (dcantrel)
+- Mark the sshkey --username option as required in docs (mkolman)
+- Test on recent Python versions on Travis (mkolman)
+- Fix snapshot documentation (jkonecny)
+- Add a CONTRIBUTING file. (dcantrel)
+
+* Fri Jul 26 2019 Fedora Release Engineering <releng@fedoraproject.org> - 3.20-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
+
+* Thu Mar 07 2019 David Cantrell <dcantrell@redhat.com> - 3.20-3
+- Remove the Python 2 subpackage for pykickstart (#1686380)
+
+* Sat Feb 02 2019 Fedora Release Engineering <releng@fedoraproject.org> - 3.20-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
+
+* Tue Jan 29 2019 David Cantrell <dcantrell@redhat.com> - 3.20-1
+- New release: 3.20 (dcantrell)
+- Fix backward compatibility for python2 (jkonecny)
+- In 'make local', create a dummy .asc file explaining the
+  signature. (dcantrell)
+
+* Mon Jan 28 2019 David Cantrell <dcantrell@redhat.com> - 3.19-1
+- New release: 3.19 (dcantrell)
+- Run gen_commands_docs and gen_sections_docs with python3. (dcantrell)
+- Use python3-sphinx in docs/Makefile (dcantrell)
+- Nope, this way for make po-pull and make release. (dcantrell)
+- Make sure 'make release' runs 'make po-pull' (dcantrell)
+- RHEL8Handler: include ssl certificate options (lars)
+- Add options for ssl certs on url and repo commands (lars)
+- parser: use collections.abc to import Iterator (lars)
+- test: Remove unused import (lars)
+- tests: Fix ksflatten tests (lars)
+- tests: Remove KickstartValueError test case (lars)
+- tests: Remove test case that's actually valid (lars)
+- Fix pylint warning W0102 dangerous-default-value (lars)
+- docs/versionremoved: fix sphinx import path (lars)
+- travis: don't override PYTHON with /usr/bin/python3 (lars)
+- Refactor ksverdiff and add tests for it (atodorov)
+- Patch ksverdiff so it works with argparse (atodorov)
+- Add main() function to scripts to allow module to be imported (atodorov)
+- Refactor tools/ksflatten.py and add tests for it (atodorov)
+- Add more tests for load.py (atodorov)
+- Issue DeprecationWarning for KickstartValueError and test it for
+  completeness (atodorov)
+- More test coverage for autopart (atodorov)
+- Improve tests for updates (atodorov)
+- Improved tests for timezone (atodorov)
+- Improve tests for selinux (atodorov)
+- Improve test for rootpw (atodorov)
+- Refactoring for reboot.py and more tests (atodorov)
+- Refactor monitor.py and add more tests (atodorov)
+- Add more tests for logvol.py (atodorov)
+- Refactoring for driverdisk.py (atodorov)
+- Refactor and more tests for btrfs.py (atodorov)
+- Add test to kill remaining mutant (atodorov)
+- Refactor in dmraid.py (atodorov)
+- More tests and refactoring for volgroup.py (atodorov)
+- Improve displaymode tests (atodorov)
+- Fix the kickstart section %packages (vponcova)
+- Fix versions in parsers of kickstart sections (vponcova)
+- Fix warnings for deprecated options of kickstart commands (vponcova)
+- Fix pylint errors (vponcova)
+- Update kickstart-docs.rst (jason.gerfen)
+- Kickstart usage example link (jason.gerfen)
+- Document module stream installation (mkolman)
+- Mention all man pages in all "SEE ALSO" sections (tim)
+- Fix typo in ksshell man page (tim)
+- Normalize the mount point (vponcova)
+- Clarify the --when= parameter error message. (dcantrell)
+
+* Wed Aug 29 2018 Chris Lumens <clumens@redhat.com> - 3.18-1
+- New release: 3.18 (clumens)
+- Use the RHEL8 handler to generate RHEL docs. (clumens)
+- Add missing trailing newline for syspurpose __str__ method (mkolman)
+- Add the syspurpose command (mkolman)
+- Fix 'make rpmlog' target. (dcantrell)
+
+* Wed Aug 15 2018 David Cantrell <dcantrell@redhat.com> - 3.17-1
+- New release: 3.17 (dcantrell)
+- Add authselect command to rhel8 handler (rvykydal)
+- Add module command to rhel8 handler (rvykydal)
+- Update po/pykickstart.pot (dcantrell)
+
+* Thu Aug 09 2018 David Cantrell <dcantrell@redhat.com> - 3.16-1
+- New release: 3.16 (dcantrell)
+- Remove the extra space from the logvol command (vponcova)
+- Support LUKS2 in the raid command (vponcova)
+- Support LUKS2 in the part command (vponcova)
+- Support LUKS2 in the logvol command (vponcova)
+- Support LUKS2 in the autopart command (vponcova)
+- Remove unused false positive (vponcova)
+- Wrong hanging indentation (vponcova)
+
+* Fri Jul 13 2018 Fedora Release Engineering <releng@fedoraproject.org> - 3.15-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
+
+* Tue Jul 10 2018 Chris Lumens <clumens@redhat.com> - 3.15-1
+- New release: 3.15 (clumens)
+- Add nvdimm command to RHEL7 (rvykydal)
+- Fix tests timeout (vponcova)
+- Fix pylint errors (vponcova)
+- The deprecated command upgrade is removed in another handler (vponcova)
+- The partition option --active is deprecated in another handler (vponcova)
+- The ignoredisk option --interactive is deprecated in another handler (vponcova)
+- The bootloader option --upgrade is deprecated in another handler (vponcova)
+- The command install is deprecated in another handler (vponcova)
+- The command deviceprobe is deprecated in another handler (vponcova)
+- Add kickstart warnings (vponcova)
+- Add the enablemodule command (mkolman)
+- Remove translation-canary wrapper for xgettext command. (dcantrell)
+- Use 'New release:' in the 'make bumpver' commit messages. (dcantrell)
+- Update the 'make pypi' target. (dcantrell)
+- Include the _sortCommand to the _setCommand method (#1578930) (vponcova)
+
+* Fri Jun 15 2018 Miro Hrončok <mhroncok@redhat.com> - 3.14-3
+- Rebuilt for Python 3.7
+
+* Tue May 22 2018 David Cantrell <dcantrell@redhat.com> - 3.14-2
+- Include the _sortCommand to the _setCommand method (vponcova, #1578930)
+- Remove call to xgettext_werror.sh during build
+
+* Mon May 14 2018 David Cantrell <dcantrell@redhat.com> - 3.14-1
+- Increment version to 3.14 (dcantrell)
+- Commit the new version in make bumpver. (dcantrell)
+- Adjust the make release target. (dcantrell)
+- Fix path problem in the pypi target. (dcantrell)
+- Adjust zanata check in po-pull Makefile target. (dcantrell)
+- Document that lilo and lilocheck are deprecated (vponcova)
+- Document that the command mouse is deprecated (vponcova)
+- The deprecated command upgrade is removed (vponcova)
+- The partition option --active is deprecated (vponcova)
+- The ignoredisk option --interactive is deprecated (vponcova)
+- The bootloader option --upgrade is deprecated (vponcova)
+- The command install is deprecated (vponcova)
+- The command deviceprobe is deprecated (vponcova)
+- Add Fedora 29 support (vponcova)
+- Change the timeout for nosetests (vponcova)
+- Fix deprecated commands with data (vponcova)
+
+* Thu May 10 2018 David Cantrell <dcantrell@redhat.com> - 3.13-1
+- Prepare for 3.13 release. (dcantrell)
+- Adjust the make release target. (dcantrell)
+- Fix path problem in the pypi target. (dcantrell)
+- Adjust zanata check in po-pull Makefile target. (dcantrell)
+- Update fcoe command help (rvykydal)
+- Add support for fcoe --autovlan (rvykydal)
+- Fix the writePriority test for the new nvdimm command. (clumens)
+- Fix a typo in the nvdimm command help output. (clumens)
+- Add use action to nvdimm command. (rvykydal)
+- Add nvdimm command (rvykydal)
+- Remove the spec file from the source repo. (clumens)
+- No longer reference the spec file in the Makefile. (clumens)
+- Change the rc-release target to not assume the spec file location. (clumens)
+- Get the version number from setup.py instead of the spec file. (clumens)
+- Remove PKGNAME from the Makefile. (clumens)
+
+* Thu Apr 19 2018 David Cantrell <dcantrell@redhat.com> - 3.12-5
+- BuildRequires: python2-ordered-set
+
+* Mon Apr 16 2018 David Cantrell <dcantrell@redhat.com> - 3.12-4
+- Fix python2 subpackage builds. (#1564347)
+- Disable tests by default because they fail in mock right now.
+
+* Thu Apr 12 2018 David Cantrell <dcantrell@redhat.com> - 3.12-3
+- Re-enable the python2 subpackages on Fedora for now.  Some
+  programs still need it and have not moved to python3 yet. (#1564347)
+
+* Mon Apr 02 2018 David Cantrell <dcantrell@redhat.com> - 3.12-2
+- Conditionalize out python2 subpackage builds on Fedora releases
+  after 28 and EL releases after 7
+
+* Mon Feb 19 2018 Chris Lumens <clumens@redhat.com> - 3.12-1
+- Sync spec file back up. (clumens)
+- Don't use deprecated formatErrorMsg (vponcova)
+- Handle error message formatting in KickstartError (vponcova)
+- Add the KickstartHandler class (vponcova)
+- Remove --fstype=btrfs support from LogVol, Raid and Part (rvykydal)
+- Remove btrfs support (rvykydal)
+- Create RHEL8 commands to pass handler using highest version test. (rvykydal)
+- Add RHEL8 handler (rvykydal)
+- Expect kickstart commands to have the default write priority. (vponcova)
+- Authconfig is replaced with authselect (vponcova)
+
+* Fri Feb 09 2018 Igor Gnatenko <ignatenkobrain@fedoraproject.org> - 3.11-2
+- Escape macros in %%changelog
+
+* Thu Feb 08 2018 Chris Lumens <clumens@redhat.com> - 3.11-1
+- Logging level should be always set (#1543194) (vponcova)
+- Copy txt files from _build folder on make local call (jkonecny)
+
+* Thu Jan 25 2018 Chris Lumens <clumens@redhat.com> - 3.10-1
+- Update Python 2 dependency declarations to new packaging standards
+
+* Thu Jan 04 2018 Chris Lumens <clumens@redhat.com> - 3.9-1
+- Fix directory ownership (lbalhar, #202). (clumens)
+- firewall: add --use-system-defaults arg to command (#1526486) (dusty)
+- Add lineno as an attribute on KickstartParseError. (clumens)
+- Don't modify the original command and data mappings. (vponcova)
+
+* Thu Nov 30 2017 Chris Lumens <clumens@redhat.com> - 3.8-1
+- Add support for hmc command in Fedora (vponcova)
+- Commands for specifying base repo are mentioned in docs (jkonecny)
+- Add list of installation methods to the method doc (jkonecny)
+- Fix pylint warnings in the mount command (vponcova)
+- Fix test for the mount command (vponcova)
+- Add clearpart --cdl option. (sbueno+anaconda)
+- Add Fedora 28 support (vponcova)
+- Add a new 'mount' command (vpodzime)
+- Pylint fixes (vponcova)
+- Add command hmc to support SE/HMC file access in RHEL7 (vponcova)
+- Add timeout and retries options to %%packages section in RHEL7 (vponcova)
+- Call the _ method from i18n.py (jkonecny)
+- Backport spec file changes from downstream (jkonecny)
+- network: add network --bindto option (Fedora) (#1483981) (rvykydal)
+- network: add network --bindto option (RHEL) (#1483981) (rvykydal)
+- Add url --metalink support (#1464843) (rvykydal)
+- Update doc of repo --mirrorlist and --baseurl with --metalink (#1464843) (rvykydal)
+- Add repo --metalink support (#1464843) (rvykydal)
+- Add Fedora 27 support. (rvykydal)
+- Update Repo command tests. (rvykydal)
+- Split the import of commands to multiple lines (vponcova)
+- Move the installclass command to the %%anaconda section (vponcova)
+- Mention that repo name must not contain spaces (brunovern.a)
+
+* Fri Sep 15 2017 Jiri Konecny <jkonecny@redhat.com> - 3.7-2
+- Backport of the Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl> from downstream spec
+  Python 2 binary package renamed to python2-pykickstart
+  See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3
+
+* Tue Jul 18 2017 Chris Lumens <clumens@redhat.com> - 3.7-1
+- Add a Makefile target for uploading to pypi (#162). (clumens)
+- Remove some old, unneeded stuff from the Makefile. (clumens)
+- Add tests for method command (vponcova)
+- Rewrite the method command. (vponcova)
+- More documentation for bypassing the bootloader (#159) (amtlib-dot-dll)
+- Output any sections registered with NullSection (#154). (clumens)
+- Add new installclass command in master (vponcova)
+
+* Tue May 16 2017 Chris Lumens <clumens@redhat.com> - 3.6-1
+- Ignore errors from coverage tests (#138) (jkonecny)
+- Fix bumpver target when "changelog" is in the spec file more than once. (clumens)
+- Ignore a couple false positives coming from the re module. (clumens)
+- Fix snapshot command (jkonecny)
+- Generate documentation in ci tests (jkonecny)
+- Fix snapshot documentation (jkonecny)
+- Add tests for a new snapshot command (#1113207) (jkonecny)
+- Add support of --when param to snapshot command (#1113207) (jkonecny)
+- Add new snapshot KS command (#1113207) (jkonecny)
+- Add realm command test (jkonecny)
+- Add --nohome, --noboot and --noswap options to autopart command. (vponcova)
+- Add --nohome option to autopart command in RHEL7. (vponcova)
+- Add support for --chunksize option to RHEL7. (vponcova)
+- Add link to online docs to the README (#137) (martin.kolman)
+- Add --hibernation to the list of logvol size options (#1408666). (clumens)
+- Handle KickstartVersionError in ksflatten (#1412249). (clumens)
+- Fix the glob used to reference comps files in docs (#135). (clumens)
+- docs: Note under %%include that most sections don't do merging (#134) (walters)
+- Fix handling # in passwords. (clumens)
+- Pass comments=True to shlex.split calls in the test functions. (clumens)
+- Don't forget to add tests to the NOSEARGS. (clumens)
+
+* Wed Nov 30 2016 Chris Lumens <clumens@redhat.com> - 3.5-1
+- Include README.rst in the MANIFEST.in again. (clumens)
+- Disable running "make coverage" or "make check" with python2. (clumens)
+- rootpw: document that password isn't required with --lock (atodorov)
+- Run the docs makefile during RTD build (mkolman)
+- Remove the type annotations (dshea)
+- Remove mypy checks. (dshea)
+- Fix python2 compatibility when printing to stderr (jkonecny)
+- Add a type stub for the new F26 support. (clumens)
+- Fix and add tests for F26 and new displaymode (jkonecny)
+- Add non-interactive option to graphical and text modes (jkonecny)
+- Add Fedora 26 support (jkonecny)
+- fix markup a bit (add ) (gitDeveloper)
+- Print errors to stderr when errors aren't fatal (jkonecny)
+- Add build insturctions for the docs (martin.kolman)
+- More test coverage for base.py (atodorov)
+- Warn about using removed keywords in kickstart commands (atodorov)
+- More test coverage for network.py (atodorov)
+- Refactoring and more tests for partition (atodorov)
+- Add documentation for mouse (atodorov)
+- Add documentation for langsupport (atodorov)
+- Refactor lang and add more tests (atodorov)
+- Refactor iscsiname and more tests (atodorov)
+- Add short description for interactive command (atodorov)
+- Nuke all the pykickstart-2.x %%changelog history. (clumens)
+- Update network command documentation also in option help strings. (rvykydal)
+- Retroactively fix checks for reqpart and autopart (atodorov)
+- More tests for zfcp (atodorov)
+- More tests for volgroup (atodorov)
+- More tests for url (atodorov)
+- Add help documentation and more tests for upgrade.py (atodorov)
+- More tests and refactoring for timezone.py, fixes #112 (atodorov)
+- More test coverage for sshpw (atodorov)
+- Refactor and add more tests for sshkey (atodorov)
+- Remove duplicate assert (atodorov)
+- Add more tests for rootpw (atodorov)
+- Refactoring and additional test coverage for raid command (atodorov)
+- More tests for FC3_NFS (atodorov)
+- Refactor logging.py and add tests (atodorov)
+- Additional tests for FC3_HardDrive (atodorov)
+- More tests for F12_GroupData (atodorov)
+- Additional test coverage for commands/firewall.py (atodorov)
+- Add missing documentation for device command (atodorov)
+- Explain ks= vs. inst.ks= in the documentation (#109). (clumens)
+- Include the built documentation in the package tarball. (clumens)
+- Update the documentation when bumpver is run. (clumens)
+- Add commands*.rst and sections.rst to the repo. (clumens)
+- Another path change in docs/conf.py for readthedocs. (clumens)
+- Fix a couple pylint errors. (clumens)
+- Disable assertion in HelpAndDescription_TestCase (atodorov)
+- Refactor HelpAndDescription_TestCase to properly patch KSOptionParser (atodorov)
+- Add docs to the path in docs/conf.py too. (clumens)
+- Set the version in docs/conf.py with "make bumpver". (clumens)
+- Set PYTHONPATH when running sphinx-build. (clumens)
+- The build now requires sphinx to build documentation. (clumens)
+- Test if prog, help or description are empty (atodorov)
+- Clean up TODO comments (atodorov)
+- Add Sphinx extension which parses the 'versionremoved' directive (atodorov)
+- Automatically build kickstart command & sections documentation (atodorov)
+- Add a backward compatibility class for the lilo command (atodorov)
+- Split upgrade and install commands and update handlers after F20 (atodorov)
+- Don't skip DeprecatedCommands when testing handler mappings (atodorov)
+- network refactoring and more tests (atodorov)
+- iscsiname - small refactoring (atodorov)
+- firewall refactoring and more tests (atodorov)
+- clearpart: refactoring and more tests (atodorov)
+- More tests for multipath (atodorov)
+- user: more tests and refactoring (atodorov)
+- updates refactoring (atodorov)
+- timezone refactoring and more tests (atodorov)
+- fcoe more tests (atodorov)
+- sshpw: new tests and refactoring (atodorov)
+- services refactoring to reduce mutations (atodorov)
+- rootpw: refactoring and new tests (atodorov)
+- reboot: add two more tests (atodorov)
+- monitor: new test (atodorov)
+- method: refactoring and a few more tests (atodorov)
+- logvol: refactoring and more tests (atodorov)
+- iscsi: refactoring and update tests (atodorov)
+- ignoredisk: refactor to kill all mutants (atodorov)
+- realm: fix missing writePriority and add more test coverage (atodorov)
+- driverdisk: remove writePriority from _DriverDiskData constructor and other refactoring (atodorov)
+- btrfs: more mutation tests & refactoring (atodorov)
+- dmraid: more mutation and test coverage (atodorov)
+- volgroup: refactoring and more tests (atodorov)
+- xconfig: more tests to kill remaining mutations (atodorov)
+- displaymode: extra mutation and test coverage (atodorov)
+- zfcp: more mutation tests and bump code coverage (atodorov)
+- keyboard: refactoring to reduce mutations (atodorov)
+- liveimg: more tests (atodorov)
+- multipath:  to  refactoring (atodorov)
+- ostreesetup: refactoring  into  and more tests (atodorov)
+- zerombr: more tests (atodorov)
+- vnc: new test (atodorov)
+- cdrom: Remove source of mutations (atodorov)
+- eula: minor fixes and more tests (atodorov)
+- mouse: add more tests to kill some mutants (atodorov)
+- user: fix for deleting of != '' change (atodorov)
+- Delete str != "" comparisons to remove 8*110 possible mutations (atodorov)
+- rescue: new test to kill remaining mutants (atodorov)
+- reqpart: new test to kill remaining mutants (atodorov)
+- interactive, lilocheck, mediacheck: kill remaining mutants (atodorov)
+- unsupported_hardware: new test to kill remaining mutants (atodorov)
+- skipx: new test to kill remaining mutants (atodorov)
+- autostep: new test to kill remaining mutants (atodorov)
+- Remove unnecessary nargs=1 parameter (atodorov)
+- Pass writePriority to KickstartCommand.__init__ (atodorov)
+- Add test for writePriority (atodorov)
+- Refactor mock.patch so it works with Cosmic-Ray (atodorov)
+
+* Thu Oct 06 2016 Chris Lumens <clumens@redhat.com> - 3.4-1
+- Fix Python 2 builds by assigning to KSOptionParser.version properly (#106) (atodorov)
+- Do not run translation-canary under python2. (clumens)
+- Add network --no-activate option. (#104) (rvykydal)
+- Don't run the ksvalidator test under python2. (clumens)
+- Fix the check for the error raised by the logvol command on python2. (clumens)
+- Support timezone command usage without timezone specification (mkolman)
+- Formatting fixes (mkolman)
+- Stylistic improvements as sugested by static chackers (#95) (martin.kolman)
+- Fix unused-variable warning (atodorov)
+- Fix command handler errors identified by previous test (atodorov)
+- Test for older versions in new Fedora releases. Closes #28 (atodorov)
+- Rename FC16 to F16 so we can find it later in versionMap (atodorov)
+- Update sys.path in handlers/control.py if not already updated (atodorov)
+- KSOptionParser accepts description, not help argument (atodorov)
+- Remove unused import (atodorov)
+- Fix class definition problems identified by previous test (atodorov)
+- Test how command and data classes are defined (atodorov)
+- Fix a couple problems with the previous ksvalidator patches. (clumens)
+- Remove a bunch of history from the spec file. (clumens)
+- Refactor ksvalidator and its tests (#90) (atodorov)
+- Fix some code smells (#89) (atodorov)
+- Enable Travis-CI (#88) (atodorov)
+- Add versionToLongString to the type annotation file. (clumens)
+- Update tests to reflect new positional arguments (atodorov)
+- Add empty help/description for KSOptionParser (atodorov)
+- Add custom help formatter for ArgumentParser (atodorov)
+- Initial Sphinx configuration (atodorov)
+- The pykickstart package should require a specific python3-kickstart. (clumens)
+- Shuffle network command options for more logical order. (rvykydal)
+- Update documentation of network command. (rvykydal)
+- Update documentation of network command. (rvykydal)
+- Download translations less frequently. (#83) (dshea)
+- Adapt to the new version of mypy (#82) (dshea)
+- Remove the locales from zanata.xml. (clumens)
+
+* Tue May 10 2016 Chris Lumens <clumens@redhat.com> - 3.3-1
+- Do not check translated strings during make check. (dshea)
+- Merge the most recent translation-canary changes. (dshea)
+- Squashed 'translation-canary/' changes from 5a45c19..840c2d6 (dshea)
+- Add documentation for --excludeWeakdeps (dshea)
+- Add support for --excludeWeakdeps option to %%packages. (james)
+- Numbers can be part of a kickstart command option. (clumens)
+- It's authconfig, not autoconfig (in the kickstart.vim file). (clumens)
+- Fix pylint no-member errors. (clumens)
+- Support file URLs for ostree (#1327460). (clumens)
+- Add ksvalidator test cases (jikortus)
+- Add classes for pykickstart tools testing (jikortus)
+- ksvalidator - don't require KS file with -l option (jikortus)
+
+* Thu Apr 14 2016 Chris Lumens <clumens@redhat.com> - 3.2-1
+- Fix a couple mistakes in the documentation. (clumens)
+- Correctly move scripts after they've been installed. (clumens)
+- Document %%traceback and %%onerror. (clumens)
+- Add a new %%onerror script section (#74). (clumens)
+- Enable coverage reporting for pykickstart tools (jikortus)
+- Fix really long lines in the documentation. (clumens)
+- Lots of documentation updates. (clumens)
+
+* Wed Mar 30 2016 Chris Lumens <clumens@redhat.com> - 3.1-1
+- Fix the version of the parser in packages tests, too. (clumens)
+- PWD doesn't work in the Makefile. (clumens)
+- Disable the attrs test for python2. (clumens)
+- Accept alternate names for some keyword arguments. (clumens)
+- Don't change ignoredisk.ignoredisk in the __init__ method. (clumens)
+- Fix bugs where F16 and F18 were using the wrong versions of objects. (clumens)
+- Allow marking options as "notest". (clumens)
+- Add a test case for various ways of setting attributes. (clumens)
+- Add a dataClass attribute to KickstartCommand. (clumens)
+- Add a test case for deprecated command corner cases. (clumens)
+- Add --chunksize option to raid command. (vtrefny)
+- Add a test case for the deprecated multipath command. (clumens)
+- Mark the device, dmraid, and multipath commands as deprecated. (clumens)
+- Get rid of the ver global variable. (clumens)
+- Remove deprecated commands from the documentation. (clumens)
+- Add Fedora 25 support. (vtrefny)
+- Add some more tests for parser-related corner cases. (clumens)
+- Fix processing of the #platform= comment. (clumens)
+- Get rid of a bunch of unnecessary blank lines. (clumens)
+- fix formating (Frodox)
+- Change network example to working one (Frodox)
+- Add DNF system-upgrade near FedUp references (github)
+
+* Fri Mar 04 2016 Chris Lumens <clumens@redhat.com> - 3.0-1
+- Make sure the script test references parser. (clumens)
+- Don't use class attributes for the version or kickstart string. (clumens)
+- Add a syntax highlighting file for vim. (clumens)
+- Move tests/parser/* into the tests/ directory. (clumens)
+- Use importlib to import modules. (dshea)
+- Update kickstart documentation for ntp (jkonecny)
+- It's self.sshkey, not self.key. (clumens)
+- Remove orderedset.py (dshea)
+- Remove the removal of the eintr checker, which has been removed (dshea)
+- Improved method.py test coverage (jikortus)
+- Verify that a password with a # sign doesn't get read as a comment. (clumens)
+- Raise deprecation warnings in _setToSelf and _setToObj. (clumens)
+- Do not log httpd messages in the load tests. (dshea)
+- There is no F7_Key class - use RHEL5_Key instead. (clumens)
+- The RHEL6 branch supported the key command. (clumens)
+- Add more test coverage around Group and Script objects. (clumens)
+- load.py initial test coverage + exception catch (jikortus)
+- Fix more formatting problems under the part command. (clumens)
+- Fix some indentation problems in the documentation. (clumens)
+- Clear up confusing documentation about MB vs. MiB. (clumens)
+- argparse error messages are different in python2 and python3. (clumens)
+- Add a document describing how to adapt your code to pykickstart-3. (clumens)
+- Promote _setToObj and _setToSelf to public functions. (clumens)
+- Increase test coverage to 96%%. (clumens)
+- Don't duplicate autopart+volgroup checks in the volgroup handlers. (clumens)
+- RHEL7 needs to use the correct version of FcoeData and Autopart. (clumens)
+- Replace required=1 and deprecated=1 with =True. (clumens)
+- Get rid of unnecessary args to add_argument. (clumens)
+- Get rid of references to KickstartParseError in assert_parse_error. (clumens)
+- Convert command objects to use argparse instead of optparse. (clumens)
+- Remove KickstartValueError. (clumens)
+- Add some custom actions and types to make things easier elsewhere. (clumens)
+- _setToSelf and _setToObj now take a Namespace object. (clumens)
+- Use the new ksboolean function where we were using the string. (clumens)
+- Convert options.py to use argparse instead of optparse. (clumens)
+- Remove the custom map and map_extend actions. (clumens)
+- Try harder to test translations. (dshea)

sources

@@ -0,0 +1,2 @@
+SHA512 (pykickstart-3.29.tar.gz) = c8e57283556fb5776a7100a22fc81608ed8990c8397672023ae816babeaf2e48e14566616bdb03b9e047068c4908e832ae2575e7d7027530c9519de089be494d
+SHA512 (pykickstart-3.29.tar.gz.asc) = 19106f73aedb1a0b07b202ed57d1f9df94ac378137ccf24badcea8a1ed9a98366a1c85cf1efb6f1d63a0265823289d3593a610b49ecfa28cd1f3d38f682820c2

tests/scripts/run_tests.sh

@@ -0,0 +1,31 @@
+#!/bin/sh
+
+PATH=/usr/bin
+TMPDIR="$(mktemp -d)"
+CWD="$(pwd)"
+
+PACKAGE=pykickstart
+BRANCH=
+
+# clone the dist-git tree for this package
+cd ${TMPDIR}
+fedpkg co ${PACKAGE}
+cd ${PACKAGE}
+[ -z "${BRANCH}" ] || fedpkg switch-branch ${BRANCH}
+fedpkg prep
+
+# scramble together the extracted source tree name
+SRCDIR="${PACKAGE}-$(grep Version: ${PACKAGE}.spec | cut -d ' ' -f 2)"
+
+# run the tests
+cd ${SRCDIR}
+make check
+CHECK_RET=$?
+make test
+TEST_RET=$?
+RET=$((${CHECK_RET} + ${TEST_RET}))
+
+# clean up and exit
+cd ${CWD}
+rm -rf ${TMPDIR}
+exit ${RET}

tests/tests.yml

@@ -0,0 +1,15 @@
+---
+
+- hosts: localhost
+  roles:
+    - role: standard-test-basic
+      tags:
+        - classic
+
+      required_packages:
+        - fedpkg
+
+      tests:
+        - simple:
+            dir: scripts/
+            run: ./run_tests.sh