rpms/pulseaudio
7
0
Fork 0
Code Issues Pull Requests Releases Activity

Fix Intel LPE HDMI problems:

Browse Source 
Update to upstream gitsnapshot which contains a fix for the crash caused
  by patch93 (and contains patch93 fixing the Intel LPE HDMI pa crash)
Fix-realtime-scheduling-on-byt-cht.patch, Fix-Intel-HDMI-LPE-problems.patch:
  drop both, both fixes are included in the git snapshot
This commit is contained in:
Hans de Goede 2018-04-25 14:47:20 +02:00
parent b01b56c56c
commit bed8ea6a50
18 changed files with 33 additions and 2142 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

96
0004-alsa-mixer-Add-support-for-usb-audio-in-the-Dell-doc.patch
View File

@ -1,96 +0,0 @@
From 60c0edd5286dbb731c671ad3e6886c1e3e1eb067 Mon Sep 17 00:00:00 2001
From: Hui Wang <hui.wang@canonical.com>
Date: Fri, 26 May 2017 15:42:40 +0800
Subject: [PATCH 04/48] alsa-mixer: Add support for usb audio in the Dell dock
TB16
There are one headset jack on the front panel of TB16, through this
jack, we have one stereo headphone output (hw:%f,0,0) and one mono
headset-mic input (hw:%f,0,0); and there is one speaker output jack
(hw:%f,1,0) on the rear panel of TB16.
The detail information of the Dell dock TB16:
http://www.dell.com/support/article/sg/en/sgbsdt1/SLN301105
Signed-off-by: Hui Wang <hui.wang@canonical.com>
---
.../alsa/mixer/profile-sets/90-pulseaudio.rules | 1 +
.../profile-sets/dell-dock-tb16-usb-audio.conf | 55 ++++++++++++++++++++++
2 files changed, 56 insertions(+)
create mode 100644 src/modules/alsa/mixer/profile-sets/dell-dock-tb16-usb-audio.conf
diff --git a/src/modules/alsa/mixer/profile-sets/90-pulseaudio.rules b/src/modules/alsa/mixer/profile-sets/90-pulseaudio.rules
index 70e34e6f..805a05b2 100644
--- a/src/modules/alsa/mixer/profile-sets/90-pulseaudio.rules
+++ b/src/modules/alsa/mixer/profile-sets/90-pulseaudio.rules
@@ -98,5 +98,6 @@ ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1021", ENV{PULSE_PROFILE_SET}="nativ
ATTRS{idVendor}=="0763", ATTRS{idProduct}=="2012", ENV{PULSE_PROFILE_SET}="maudio-fasttrack-pro.conf"
ATTRS{idVendor}=="045e", ATTRS{idProduct}=="02bb", ENV{PULSE_PROFILE_SET}="kinect-audio.conf"
ATTRS{idVendor}=="041e", ATTRS{idProduct}=="322c", ENV{PULSE_PROFILE_SET}="sb-omni-surround-5.1.conf"
+ATTRS{idVendor}=="0bda", ATTRS{idProduct}=="4014", ENV{PULSE_PROFILE_SET}="dell-dock-tb16-usb-audio.conf"
LABEL="pulseaudio_end"
diff --git a/src/modules/alsa/mixer/profile-sets/dell-dock-tb16-usb-audio.conf b/src/modules/alsa/mixer/profile-sets/dell-dock-tb16-usb-audio.conf
new file mode 100644
index 00000000..11865524
--- /dev/null
+++ b/src/modules/alsa/mixer/profile-sets/dell-dock-tb16-usb-audio.conf
@@ -0,0 +1,55 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+; Dell Dock TB16 USB audio
+;
+; This card has two stereo pairs of output, One Mono input.
+;
+; See default.conf for an explanation on the directives used here.
+
+[General]
+auto-profiles = no
+
+[Mapping analog-stereo-headphone]
+description = Headphone
+device-strings = hw:%f,0,0
+channel-map = left,right
+direction = output
+
+[Mapping analog-stereo-speaker]
+description = Speaker
+device-strings = hw:%f,1,0
+channel-map = left,right
+direction = output
+
+[Mapping analog-stereo-mic]
+description = Headset-Mic
+device-strings = hw:%f,0,0
+channel-map = left,right
+direction = input
+
+
+[Profile output:analog-stereo-speaker]
+description = Speaker
+output-mappings = analog-stereo-speaker
+priority = 60
+skip-probe = yes
+
+[Profile output:analog-stereo-headphone+input:analog-stereo-mic]
+description = Headset
+output-mappings = analog-stereo-headphone
+input-mappings = analog-stereo-mic
+priority = 80
+skip-probe = yes
--
2.13.6

48
0009-alsa-mixer-set-PCM-Capture-Source-for-iec958-input.patch
View File

@ -1,48 +0,0 @@
From ec325304cdca5e2a46f5a84f93c8b614a204d87f Mon Sep 17 00:00:00 2001
From: Tanu Kaskinen <tanuk@iki.fi>
Date: Fri, 4 Aug 2017 11:14:43 +0300
Subject: [PATCH 09/48] alsa-mixer: set PCM Capture Source for iec958 input
It was reported that on a certain USB card, identified as
"0d8c:0102 C-Media Electronics, Inc. CM106 Like Sound Device",
the "PCM Capture Source" element had to be set to "IEC958 In" before
the iec958 input would work.
The iec958-stereo-input.conf file didn't exist before, although the path
was referenced in the default.conf profile configuration file.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=101973
---
.../alsa/mixer/paths/iec958-stereo-input.conf | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
create mode 100644 src/modules/alsa/mixer/paths/iec958-stereo-input.conf
diff --git a/src/modules/alsa/mixer/paths/iec958-stereo-input.conf b/src/modules/alsa/mixer/paths/iec958-stereo-input.conf
new file mode 100644
index 00000000..babc8398
--- /dev/null
+++ b/src/modules/alsa/mixer/paths/iec958-stereo-input.conf
@@ -0,0 +1,20 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+[Element PCM Capture Source]
+enumeration = select
+
+[Option PCM Capture Source:IEC958 In]
+name = iec958-input
--
2.13.6

25
0010-build-sys-add-iec958-stereo-input.conf-to-dist_alsap.patch
View File

@ -1,25 +0,0 @@
From 4e6d9e321400cbb660b4373db6b50bea71707641 Mon Sep 17 00:00:00 2001
From: Tanu Kaskinen <tanuk@iki.fi>
Date: Fri, 4 Aug 2017 16:43:02 +0300
Subject: [PATCH 10/48] build-sys: add iec958-stereo-input.conf to
dist_alsapaths_DATA
---
src/Makefile.am | 1 +
1 file changed, 1 insertion(+)
diff --git a/src/Makefile.am b/src/Makefile.am
index 3ff1139f..1d974037 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -1343,6 +1343,7 @@ dist_alsapaths_DATA = \
modules/alsa/mixer/paths/analog-output-headphones-2.conf \
modules/alsa/mixer/paths/analog-output-lineout.conf \
modules/alsa/mixer/paths/analog-output-mono.conf \
+ modules/alsa/mixer/paths/iec958-stereo-input.conf \
modules/alsa/mixer/paths/iec958-stereo-output.conf \
modules/alsa/mixer/paths/hdmi-output-0.conf \
modules/alsa/mixer/paths/hdmi-output-1.conf \
--
2.13.6

45
0015-alsa-mixer-round-not-truncate-in-to_alsa_dB.patch
View File

@ -1,45 +0,0 @@
From 739a4b3d2318f05eb7101c2baa861e5c636125a5 Mon Sep 17 00:00:00 2001
From: Ian Ray <ian.ray@ge.com>
Date: Wed, 30 Aug 2017 11:09:48 +0300
Subject: [PATCH 15/48] alsa-mixer: round, not truncate, in to_alsa_dB
to_alsa_dB() returns a result rounded to two decimal places (instead of
using integer truncation) to avoid small errors when converting between
dB and volume.
Consider playback at -22 dB (which is supported by ALSA) but results in
the higher level of -21 dB plus software attenuation.
pa_sw_volume_from_dB(-22) = 28172
pa_sw_volume_to_dB(28172) = -21.9997351
to_alsa_dB(-21.9997351) = -2199
ALSA value 106 = -2200
ALSA value 107 = -2100
...
rounding = +1 /* "accurate or first above" */
snd_mixer_selem_ask_playback_dB_vol(me, -2199, rounding, &alsa_val)
alsa_val = -2100
Signed-off-by: Ian Ray <ian.ray@ge.com>
---
src/modules/alsa/alsa-mixer.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/src/modules/alsa/alsa-mixer.c b/src/modules/alsa/alsa-mixer.c
index f59cad39..aeaf12c4 100644
--- a/src/modules/alsa/alsa-mixer.c
+++ b/src/modules/alsa/alsa-mixer.c
@@ -700,7 +700,7 @@ void pa_alsa_path_set_free(pa_alsa_path_set *ps) {
}
static long to_alsa_dB(pa_volume_t v) {
- return (long) (pa_sw_volume_to_dB(v) * 100.0);
+ return lround(pa_sw_volume_to_dB(v) * 100.0);
}
static pa_volume_t from_alsa_dB(long v) {
--
2.13.6

193
0016-alsa-mixer-add-support-for-Steelseries-Arctis-7-head.patch
View File

@ -1,193 +0,0 @@
From 15386a710c1500f70085a6312fb4d84be4d254c9 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Johan=20Heikkil=C3=A4?= <johan.heikkila@gmail.com>
Date: Sun, 27 Aug 2017 16:29:37 +0300
Subject: [PATCH 16/48] alsa-mixer: add support for Steelseries Arctis 7
headset
---
src/modules/alsa/alsa-mixer.c | 1 +
.../alsa/mixer/paths/steelseries-arctis-input.conf | 25 +++++++++++++
.../paths/steelseries-arctis-output-mono.conf | 29 +++++++++++++++
.../paths/steelseries-arctis-output-stereo.conf | 27 ++++++++++++++
.../alsa/mixer/profile-sets/90-pulseaudio.rules | 1 +
.../profile-sets/steelseries-arctis-usb-audio.conf | 43 ++++++++++++++++++++++
6 files changed, 126 insertions(+)
create mode 100644 src/modules/alsa/mixer/paths/steelseries-arctis-input.conf
create mode 100644 src/modules/alsa/mixer/paths/steelseries-arctis-output-mono.conf
create mode 100644 src/modules/alsa/mixer/paths/steelseries-arctis-output-stereo.conf
create mode 100644 src/modules/alsa/mixer/profile-sets/steelseries-arctis-usb-audio.conf
diff --git a/src/modules/alsa/alsa-mixer.c b/src/modules/alsa/alsa-mixer.c
index aeaf12c4..08ea45d3 100644
--- a/src/modules/alsa/alsa-mixer.c
+++ b/src/modules/alsa/alsa-mixer.c
@@ -2469,6 +2469,7 @@ static int path_verify(pa_alsa_path *p) {
{ "analog-input-video", N_("Video") },
{ "analog-output", N_("Analog Output") },
{ "analog-output-headphones", N_("Headphones") },
+ { "analog-output-headphones-mono", N_("Headphones Mono Output") },
{ "analog-output-lfe-on-mono", N_("LFE on Separate Mono Output") },
{ "analog-output-lineout", N_("Line Out") },
{ "analog-output-mono", N_("Analog Mono Output") },
diff --git a/src/modules/alsa/mixer/paths/steelseries-arctis-input.conf b/src/modules/alsa/mixer/paths/steelseries-arctis-input.conf
new file mode 100644
index 00000000..f3115ba6
--- /dev/null
+++ b/src/modules/alsa/mixer/paths/steelseries-arctis-input.conf
@@ -0,0 +1,25 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+; Steelseries Arctis 7 USB headset microphone path.
+
+[General]
+description-key = analog-input-microphone-headset
+
+[Element Headset]
+volume = merge
+switch = mute
+override-map.1 = all
+override-map.2 = all-left,all-right
diff --git a/src/modules/alsa/mixer/paths/steelseries-arctis-output-mono.conf b/src/modules/alsa/mixer/paths/steelseries-arctis-output-mono.conf
new file mode 100644
index 00000000..67950618
--- /dev/null
+++ b/src/modules/alsa/mixer/paths/steelseries-arctis-output-mono.conf
@@ -0,0 +1,29 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+; Steelseries Arctis 7 USB headset mono output path. The headset has two
+; output devices. The first one is mono, meant for voice audio, and the
+; second one is stereo, meant for everything else. The purpose of this
+; unusual design is to provide separate volume controls for voice and
+; other audio, which can be useful in gaming.
+
+[General]
+description-key = analog-output-headphones-mono
+
+[Element PCM]
+volume = merge
+switch = mute
+override-map.1 = all
+override-map.2 = all-left,all-right
diff --git a/src/modules/alsa/mixer/paths/steelseries-arctis-output-stereo.conf b/src/modules/alsa/mixer/paths/steelseries-arctis-output-stereo.conf
new file mode 100644
index 00000000..4e10c800
--- /dev/null
+++ b/src/modules/alsa/mixer/paths/steelseries-arctis-output-stereo.conf
@@ -0,0 +1,27 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+; Steelseries Arctis 7 USB headset stereo output path. The headset has two
+; output devices. The first one is mono, meant for voice audio, and the
+; second one is stereo, meant for everything else. The purpose of this
+; unusual design is to provide separate volume controls for voice and
+; other audio, which can be useful in gaming.
+;
+; This path doesn't provide hardware volume control, because the stereo
+; output is controlled by the PCM element with index 1, and currently
+; PulseAudio only supports elements with index 0.
+
+[General]
+description-key = analog-output-headphones
diff --git a/src/modules/alsa/mixer/profile-sets/90-pulseaudio.rules b/src/modules/alsa/mixer/profile-sets/90-pulseaudio.rules
index 805a05b2..2392ca50 100644
--- a/src/modules/alsa/mixer/profile-sets/90-pulseaudio.rules
+++ b/src/modules/alsa/mixer/profile-sets/90-pulseaudio.rules
@@ -99,5 +99,6 @@ ATTRS{idVendor}=="0763", ATTRS{idProduct}=="2012", ENV{PULSE_PROFILE_SET}="maudi
ATTRS{idVendor}=="045e", ATTRS{idProduct}=="02bb", ENV{PULSE_PROFILE_SET}="kinect-audio.conf"
ATTRS{idVendor}=="041e", ATTRS{idProduct}=="322c", ENV{PULSE_PROFILE_SET}="sb-omni-surround-5.1.conf"
ATTRS{idVendor}=="0bda", ATTRS{idProduct}=="4014", ENV{PULSE_PROFILE_SET}="dell-dock-tb16-usb-audio.conf"
+ATTRS{idVendor}=="1038", ATTRS{idProduct}=="1260", ENV{PULSE_PROFILE_SET}="steelseries-arctis-usb-audio.conf"
LABEL="pulseaudio_end"
diff --git a/src/modules/alsa/mixer/profile-sets/steelseries-arctis-usb-audio.conf b/src/modules/alsa/mixer/profile-sets/steelseries-arctis-usb-audio.conf
new file mode 100644
index 00000000..d3563a16
--- /dev/null
+++ b/src/modules/alsa/mixer/profile-sets/steelseries-arctis-usb-audio.conf
@@ -0,0 +1,43 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+; Steelseries Arctis 7 USB headset. The headset has a microphone and two output
+; devices. The first output device is mono, meant for voice audio, and the
+; second one is stereo, meant for everything else. The purpose of this unusual
+; design is to provide separate volume controls for voice and other audio,
+; which can be useful in gaming.
+;
+; See default.conf for an explanation on the directives used here.
+
+[General]
+auto-profiles = yes
+
+[Mapping analog-mono]
+device-strings = hw:%f,0,0
+channel-map = mono
+paths-output = steelseries-arctis-output-mono
+paths-input = steelseries-arctis-input
+
+[Mapping analog-stereo]
+device-strings = hw:%f,1,0
+channel-map = left,right
+paths-output = steelseries-arctis-output-stereo
+direction = output
+
+[Profile output:analog-mono+output:analog-stereo+input:analog-mono]
+output-mappings = analog-mono analog-stereo
+input-mappings = analog-mono
+priority = 5100
+skip-probe = yes
--
2.13.6

38
0018-build-sys-add-the-Arctis-configuration.patch
View File

@ -1,38 +0,0 @@
From c7fe78c9f73ded2c3428666722ec9c1af4b82812 Mon Sep 17 00:00:00 2001
From: Tanu Kaskinen <tanuk@iki.fi>
Date: Sat, 2 Sep 2017 18:23:12 +0300
Subject: [PATCH 18/48] build-sys: add the Arctis configuration
---
src/Makefile.am | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/src/Makefile.am b/src/Makefile.am
index 1d974037..ba2ea97e 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -1310,7 +1310,8 @@ dist_alsaprofilesets_DATA = \
modules/alsa/mixer/profile-sets/native-instruments-traktorkontrol-s4.conf \
modules/alsa/mixer/profile-sets/native-instruments-korecontroller.conf \
modules/alsa/mixer/profile-sets/kinect-audio.conf \
- modules/alsa/mixer/profile-sets/sb-omni-surround-5.1.conf
+ modules/alsa/mixer/profile-sets/sb-omni-surround-5.1.conf \
+ modules/alsa/mixer/profile-sets/steelseries-arctis-usb-audio.conf
if HAVE_UDEV
dist_udevrules_DATA = \
@@ -1352,7 +1353,10 @@ dist_alsapaths_DATA = \
modules/alsa/mixer/paths/hdmi-output-4.conf \
modules/alsa/mixer/paths/hdmi-output-5.conf \
modules/alsa/mixer/paths/hdmi-output-6.conf \
- modules/alsa/mixer/paths/hdmi-output-7.conf
+ modules/alsa/mixer/paths/hdmi-output-7.conf \
+ modules/alsa/mixer/paths/steelseries-arctis-input.conf \
+ modules/alsa/mixer/paths/steelseries-arctis-output-mono.conf \
+ modules/alsa/mixer/paths/steelseries-arctis-output-stereo.conf
endif
--
2.13.6

740
0033-qpaeq-change-license-from-AGPL-to-LGPL-v2.1.patch
View File

@ -1,740 +0,0 @@
From 61217528a1cb5043ca3fa1051a73ad3268cfb3d8 Mon Sep 17 00:00:00 2001
From: Tanu Kaskinen <tanuk@iki.fi>
Date: Tue, 19 Sep 2017 17:25:47 +0300
Subject: [PATCH 033/106] qpaeq: change license from AGPL to LGPL v2.1
This removes one unnecessary exception in the PulseAudio licensing
terms. In December 2016 I asked permission from all qpaeq contributors
for the license change, and all gave the permission. I have archived the
emails here:
https://www.freedesktop.org/software/pulseaudio/misc/qpaeq_relicensing_emails.txt
---
AGPL | 661 --------------------------------------------------------
LICENSE | 4 -
Makefile.am | 1 -
src/utils/qpaeq | 8 +-
4 files changed, 4 insertions(+), 670 deletions(-)
delete mode 100644 AGPL
diff --git a/AGPL b/AGPL
deleted file mode 100644
index dba13ed2..00000000
--- a/AGPL
+++ /dev/null
@@ -1,661 +0,0 @@
- GNU AFFERO GENERAL PUBLIC LICENSE
- Version 3, 19 November 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The GNU Affero General Public License is a free, copyleft license for
-software and other kinds of works, specifically designed to ensure
-cooperation with the community in the case of network server software.
-
- The licenses for most software and other practical works are designed
-to take away your freedom to share and change the works. By contrast,
-our General Public Licenses are intended to guarantee your freedom to
-share and change all versions of a program--to make sure it remains free
-software for all its users.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-them if you wish), that you receive source code or can get it if you
-want it, that you can change the software or use pieces of it in new
-free programs, and that you know you can do these things.
-
- Developers that use our General Public Licenses protect your rights
-with two steps: (1) assert copyright on the software, and (2) offer
-you this License which gives you legal permission to copy, distribute
-and/or modify the software.
-
- A secondary benefit of defending all users' freedom is that
-improvements made in alternate versions of the program, if they
-receive widespread use, become available for other developers to
-incorporate. Many developers of free software are heartened and
-encouraged by the resulting cooperation. However, in the case of
-software used on network servers, this result may fail to come about.
-The GNU General Public License permits making a modified version and
-letting the public access it on a server without ever releasing its
-source code to the public.
-
- The GNU Affero General Public License is designed specifically to
-ensure that, in such cases, the modified source code becomes available
-to the community. It requires the operator of a network server to
-provide the source code of the modified version running there to the
-users of that server. Therefore, public use of a modified version, on
-a publicly accessible server, gives the public access to the source
-code of the modified version.
-
- An older license, called the Affero General Public License and
-published by Affero, was designed to accomplish similar goals. This is
-a different license, not a version of the Affero GPL, but Affero has
-released a new version of the Affero GPL which permits relicensing under
-this license.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-
- TERMS AND CONDITIONS
-
- 0. Definitions.
-
- "This License" refers to version 3 of the GNU Affero General Public License.
-
- "Copyright" also means copyright-like laws that apply to other kinds of
-works, such as semiconductor masks.
-
- "The Program" refers to any copyrightable work licensed under this
-License. Each licensee is addressed as "you". "Licensees" and
-"recipients" may be individuals or organizations.
-
- To "modify" a work means to copy from or adapt all or part of the work
-in a fashion requiring copyright permission, other than the making of an
-exact copy. The resulting work is called a "modified version" of the
-earlier work or a work "based on" the earlier work.
-
- A "covered work" means either the unmodified Program or a work based
-on the Program.
-
- To "propagate" a work means to do anything with it that, without
-permission, would make you directly or secondarily liable for
-infringement under applicable copyright law, except executing it on a
-computer or modifying a private copy. Propagation includes copying,
-distribution (with or without modification), making available to the
-public, and in some countries other activities as well.
-
- To "convey" a work means any kind of propagation that enables other
-parties to make or receive copies. Mere interaction with a user through
-a computer network, with no transfer of a copy, is not conveying.
-
- An interactive user interface displays "Appropriate Legal Notices"
-to the extent that it includes a convenient and prominently visible
-feature that (1) displays an appropriate copyright notice, and (2)
-tells the user that there is no warranty for the work (except to the
-extent that warranties are provided), that licensees may convey the
-work under this License, and how to view a copy of this License. If
-the interface presents a list of user commands or options, such as a
-menu, a prominent item in the list meets this criterion.
-
- 1. Source Code.
-
- The "source code" for a work means the preferred form of the work
-for making modifications to it. "Object code" means any non-source
-form of a work.
-
- A "Standard Interface" means an interface that either is an official
-standard defined by a recognized standards body, or, in the case of
-interfaces specified for a particular programming language, one that
-is widely used among developers working in that language.
-
- The "System Libraries" of an executable work include anything, other
-than the work as a whole, that (a) is included in the normal form of
-packaging a Major Component, but which is not part of that Major
-Component, and (b) serves only to enable use of the work with that
-Major Component, or to implement a Standard Interface for which an
-implementation is available to the public in source code form. A
-"Major Component", in this context, means a major essential component
-(kernel, window system, and so on) of the specific operating system
-(if any) on which the executable work runs, or a compiler used to
-produce the work, or an object code interpreter used to run it.
-
- The "Corresponding Source" for a work in object code form means all
-the source code needed to generate, install, and (for an executable
-work) run the object code and to modify the work, including scripts to
-control those activities. However, it does not include the work's
-System Libraries, or general-purpose tools or generally available free
-programs which are used unmodified in performing those activities but
-which are not part of the work. For example, Corresponding Source
-includes interface definition files associated with source files for
-the work, and the source code for shared libraries and dynamically
-linked subprograms that the work is specifically designed to require,
-such as by intimate data communication or control flow between those
-subprograms and other parts of the work.
-
- The Corresponding Source need not include anything that users
-can regenerate automatically from other parts of the Corresponding
-Source.
-
- The Corresponding Source for a work in source code form is that
-same work.
-
- 2. Basic Permissions.
-
- All rights granted under this License are granted for the term of
-copyright on the Program, and are irrevocable provided the stated
-conditions are met. This License explicitly affirms your unlimited
-permission to run the unmodified Program. The output from running a
-covered work is covered by this License only if the output, given its
-content, constitutes a covered work. This License acknowledges your
-rights of fair use or other equivalent, as provided by copyright law.
-
- You may make, run and propagate covered works that you do not
-convey, without conditions so long as your license otherwise remains
-in force. You may convey covered works to others for the sole purpose
-of having them make modifications exclusively for you, or provide you
-with facilities for running those works, provided that you comply with
-the terms of this License in conveying all material for which you do
-not control copyright. Those thus making or running the covered works
-for you must do so exclusively on your behalf, under your direction
-and control, on terms that prohibit them from making any copies of
-your copyrighted material outside their relationship with you.
-
- Conveying under any other circumstances is permitted solely under
-the conditions stated below. Sublicensing is not allowed; section 10
-makes it unnecessary.
-
- 3. Protecting Users' Legal Rights From Anti-Circumvention Law.
-
- No covered work shall be deemed part of an effective technological
-measure under any applicable law fulfilling obligations under article
-11 of the WIPO copyright treaty adopted on 20 December 1996, or
-similar laws prohibiting or restricting circumvention of such
-measures.
-
- When you convey a covered work, you waive any legal power to forbid
-circumvention of technological measures to the extent such circumvention
-is effected by exercising rights under this License with respect to
-the covered work, and you disclaim any intention to limit operation or
-modification of the work as a means of enforcing, against the work's
-users, your or third parties' legal rights to forbid circumvention of
-technological measures.
-
- 4. Conveying Verbatim Copies.
-
- You may convey verbatim copies of the Program's source code as you
-receive it, in any medium, provided that you conspicuously and
-appropriately publish on each copy an appropriate copyright notice;
-keep intact all notices stating that this License and any
-non-permissive terms added in accord with section 7 apply to the code;
-keep intact all notices of the absence of any warranty; and give all
-recipients a copy of this License along with the Program.
-
- You may charge any price or no price for each copy that you convey,
-and you may offer support or warranty protection for a fee.
-
- 5. Conveying Modified Source Versions.
-
- You may convey a work based on the Program, or the modifications to
-produce it from the Program, in the form of source code under the
-terms of section 4, provided that you also meet all of these conditions:
-
- a) The work must carry prominent notices stating that you modified
- it, and giving a relevant date.
-
- b) The work must carry prominent notices stating that it is
- released under this License and any conditions added under section
- 7. This requirement modifies the requirement in section 4 to
- "keep intact all notices".
-
- c) You must license the entire work, as a whole, under this
- License to anyone who comes into possession of a copy. This
- License will therefore apply, along with any applicable section 7
- additional terms, to the whole of the work, and all its parts,
- regardless of how they are packaged. This License gives no
- permission to license the work in any other way, but it does not
- invalidate such permission if you have separately received it.
-
- d) If the work has interactive user interfaces, each must display
- Appropriate Legal Notices; however, if the Program has interactive
- interfaces that do not display Appropriate Legal Notices, your
- work need not make them do so.
-
- A compilation of a covered work with other separate and independent
-works, which are not by their nature extensions of the covered work,
-and which are not combined with it such as to form a larger program,
-in or on a volume of a storage or distribution medium, is called an
-"aggregate" if the compilation and its resulting copyright are not
-used to limit the access or legal rights of the compilation's users
-beyond what the individual works permit. Inclusion of a covered work
-in an aggregate does not cause this License to apply to the other
-parts of the aggregate.
-
- 6. Conveying Non-Source Forms.
-
- You may convey a covered work in object code form under the terms
-of sections 4 and 5, provided that you also convey the
-machine-readable Corresponding Source under the terms of this License,
-in one of these ways:
-
- a) Convey the object code in, or embodied in, a physical product
- (including a physical distribution medium), accompanied by the
- Corresponding Source fixed on a durable physical medium
- customarily used for software interchange.
-
- b) Convey the object code in, or embodied in, a physical product
- (including a physical distribution medium), accompanied by a
- written offer, valid for at least three years and valid for as
- long as you offer spare parts or customer support for that product
- model, to give anyone who possesses the object code either (1) a
- copy of the Corresponding Source for all the software in the
- product that is covered by this License, on a durable physical
- medium customarily used for software interchange, for a price no
- more than your reasonable cost of physically performing this
- conveying of source, or (2) access to copy the
- Corresponding Source from a network server at no charge.
-
- c) Convey individual copies of the object code with a copy of the
- written offer to provide the Corresponding Source. This
- alternative is allowed only occasionally and noncommercially, and
- only if you received the object code with such an offer, in accord
- with subsection 6b.
-
- d) Convey the object code by offering access from a designated
- place (gratis or for a charge), and offer equivalent access to the
- Corresponding Source in the same way through the same place at no
- further charge. You need not require recipients to copy the
- Corresponding Source along with the object code. If the place to
- copy the object code is a network server, the Corresponding Source
- may be on a different server (operated by you or a third party)
- that supports equivalent copying facilities, provided you maintain
- clear directions next to the object code saying where to find the
- Corresponding Source. Regardless of what server hosts the
- Corresponding Source, you remain obligated to ensure that it is
- available for as long as needed to satisfy these requirements.
-
- e) Convey the object code using peer-to-peer transmission, provided
- you inform other peers where the object code and Corresponding
- Source of the work are being offered to the general public at no
- charge under subsection 6d.
-
- A separable portion of the object code, whose source code is excluded
-from the Corresponding Source as a System Library, need not be
-included in conveying the object code work.
-
- A "User Product" is either (1) a "consumer product", which means any
-tangible personal property which is normally used for personal, family,
-or household purposes, or (2) anything designed or sold for incorporation
-into a dwelling. In determining whether a product is a consumer product,
-doubtful cases shall be resolved in favor of coverage. For a particular
-product received by a particular user, "normally used" refers to a
-typical or common use of that class of product, regardless of the status
-of the particular user or of the way in which the particular user
-actually uses, or expects or is expected to use, the product. A product
-is a consumer product regardless of whether the product has substantial
-commercial, industrial or non-consumer uses, unless such uses represent
-the only significant mode of use of the product.
-
- "Installation Information" for a User Product means any methods,
-procedures, authorization keys, or other information required to install
-and execute modified versions of a covered work in that User Product from
-a modified version of its Corresponding Source. The information must
-suffice to ensure that the continued functioning of the modified object
-code is in no case prevented or interfered with solely because
-modification has been made.
-
- If you convey an object code work under this section in, or with, or
-specifically for use in, a User Product, and the conveying occurs as
-part of a transaction in which the right of possession and use of the
-User Product is transferred to the recipient in perpetuity or for a
-fixed term (regardless of how the transaction is characterized), the
-Corresponding Source conveyed under this section must be accompanied
-by the Installation Information. But this requirement does not apply
-if neither you nor any third party retains the ability to install
-modified object code on the User Product (for example, the work has
-been installed in ROM).
-
- The requirement to provide Installation Information does not include a
-requirement to continue to provide support service, warranty, or updates
-for a work that has been modified or installed by the recipient, or for
-the User Product in which it has been modified or installed. Access to a
-network may be denied when the modification itself materially and
-adversely affects the operation of the network or violates the rules and
-protocols for communication across the network.
-
- Corresponding Source conveyed, and Installation Information provided,
-in accord with this section must be in a format that is publicly
-documented (and with an implementation available to the public in
-source code form), and must require no special password or key for
-unpacking, reading or copying.
-
- 7. Additional Terms.
-
- "Additional permissions" are terms that supplement the terms of this
-License by making exceptions from one or more of its conditions.
-Additional permissions that are applicable to the entire Program shall
-be treated as though they were included in this License, to the extent
-that they are valid under applicable law. If additional permissions
-apply only to part of the Program, that part may be used separately
-under those permissions, but the entire Program remains governed by
-this License without regard to the additional permissions.
-
- When you convey a copy of a covered work, you may at your option
-remove any additional permissions from that copy, or from any part of
-it. (Additional permissions may be written to require their own
-removal in certain cases when you modify the work.) You may place
-additional permissions on material, added by you to a covered work,
-for which you have or can give appropriate copyright permission.
-
- Notwithstanding any other provision of this License, for material you
-add to a covered work, you may (if authorized by the copyright holders of
-that material) supplement the terms of this License with terms:
-
- a) Disclaiming warranty or limiting liability differently from the
- terms of sections 15 and 16 of this License; or
-
- b) Requiring preservation of specified reasonable legal notices or
- author attributions in that material or in the Appropriate Legal
- Notices displayed by works containing it; or
-
- c) Prohibiting misrepresentation of the origin of that material, or
- requiring that modified versions of such material be marked in
- reasonable ways as different from the original version; or
-
- d) Limiting the use for publicity purposes of names of licensors or
- authors of the material; or
-
- e) Declining to grant rights under trademark law for use of some
- trade names, trademarks, or service marks; or
-
- f) Requiring indemnification of licensors and authors of that
- material by anyone who conveys the material (or modified versions of
- it) with contractual assumptions of liability to the recipient, for
- any liability that these contractual assumptions directly impose on
- those licensors and authors.
-
- All other non-permissive additional terms are considered "further
-restrictions" within the meaning of section 10. If the Program as you
-received it, or any part of it, contains a notice stating that it is
-governed by this License along with a term that is a further
-restriction, you may remove that term. If a license document contains
-a further restriction but permits relicensing or conveying under this
-License, you may add to a covered work material governed by the terms
-of that license document, provided that the further restriction does
-not survive such relicensing or conveying.
-
- If you add terms to a covered work in accord with this section, you
-must place, in the relevant source files, a statement of the
-additional terms that apply to those files, or a notice indicating
-where to find the applicable terms.
-
- Additional terms, permissive or non-permissive, may be stated in the
-form of a separately written license, or stated as exceptions;
-the above requirements apply either way.
-
- 8. Termination.
-
- You may not propagate or modify a covered work except as expressly
-provided under this License. Any attempt otherwise to propagate or
-modify it is void, and will automatically terminate your rights under
-this License (including any patent licenses granted under the third
-paragraph of section 11).
-
- However, if you cease all violation of this License, then your
-license from a particular copyright holder is reinstated (a)
-provisionally, unless and until the copyright holder explicitly and
-finally terminates your license, and (b) permanently, if the copyright
-holder fails to notify you of the violation by some reasonable means
-prior to 60 days after the cessation.
-
- Moreover, your license from a particular copyright holder is
-reinstated permanently if the copyright holder notifies you of the
-violation by some reasonable means, this is the first time you have
-received notice of violation of this License (for any work) from that
-copyright holder, and you cure the violation prior to 30 days after
-your receipt of the notice.
-
- Termination of your rights under this section does not terminate the
-licenses of parties who have received copies or rights from you under
-this License. If your rights have been terminated and not permanently
-reinstated, you do not qualify to receive new licenses for the same
-material under section 10.
-
- 9. Acceptance Not Required for Having Copies.
-
- You are not required to accept this License in order to receive or
-run a copy of the Program. Ancillary propagation of a covered work
-occurring solely as a consequence of using peer-to-peer transmission
-to receive a copy likewise does not require acceptance. However,
-nothing other than this License grants you permission to propagate or
-modify any covered work. These actions infringe copyright if you do
-not accept this License. Therefore, by modifying or propagating a
-covered work, you indicate your acceptance of this License to do so.
-
- 10. Automatic Licensing of Downstream Recipients.
-
- Each time you convey a covered work, the recipient automatically
-receives a license from the original licensors, to run, modify and
-propagate that work, subject to this License. You are not responsible
-for enforcing compliance by third parties with this License.
-
- An "entity transaction" is a transaction transferring control of an
-organization, or substantially all assets of one, or subdividing an
-organization, or merging organizations. If propagation of a covered
-work results from an entity transaction, each party to that
-transaction who receives a copy of the work also receives whatever
-licenses to the work the party's predecessor in interest had or could
-give under the previous paragraph, plus a right to possession of the
-Corresponding Source of the work from the predecessor in interest, if
-the predecessor has it or can get it with reasonable efforts.
-
- You may not impose any further restrictions on the exercise of the
-rights granted or affirmed under this License. For example, you may
-not impose a license fee, royalty, or other charge for exercise of
-rights granted under this License, and you may not initiate litigation
-(including a cross-claim or counterclaim in a lawsuit) alleging that
-any patent claim is infringed by making, using, selling, offering for
-sale, or importing the Program or any portion of it.
-
- 11. Patents.
-
- A "contributor" is a copyright holder who authorizes use under this
-License of the Program or a work on which the Program is based. The
-work thus licensed is called the contributor's "contributor version".
-
- A contributor's "essential patent claims" are all patent claims
-owned or controlled by the contributor, whether already acquired or
-hereafter acquired, that would be infringed by some manner, permitted
-by this License, of making, using, or selling its contributor version,
-but do not include claims that would be infringed only as a
-consequence of further modification of the contributor version. For
-purposes of this definition, "control" includes the right to grant
-patent sublicenses in a manner consistent with the requirements of
-this License.
-
- Each contributor grants you a non-exclusive, worldwide, royalty-free
-patent license under the contributor's essential patent claims, to
-make, use, sell, offer for sale, import and otherwise run, modify and
-propagate the contents of its contributor version.
-
- In the following three paragraphs, a "patent license" is any express
-agreement or commitment, however denominated, not to enforce a patent
-(such as an express permission to practice a patent or covenant not to
-sue for patent infringement). To "grant" such a patent license to a
-party means to make such an agreement or commitment not to enforce a
-patent against the party.
-
- If you convey a covered work, knowingly relying on a patent license,
-and the Corresponding Source of the work is not available for anyone
-to copy, free of charge and under the terms of this License, through a
-publicly available network server or other readily accessible means,
-then you must either (1) cause the Corresponding Source to be so
-available, or (2) arrange to deprive yourself of the benefit of the
-patent license for this particular work, or (3) arrange, in a manner
-consistent with the requirements of this License, to extend the patent
-license to downstream recipients. "Knowingly relying" means you have
-actual knowledge that, but for the patent license, your conveying the
-covered work in a country, or your recipient's use of the covered work
-in a country, would infringe one or more identifiable patents in that
-country that you have reason to believe are valid.
-
- If, pursuant to or in connection with a single transaction or
-arrangement, you convey, or propagate by procuring conveyance of, a
-covered work, and grant a patent license to some of the parties
-receiving the covered work authorizing them to use, propagate, modify
-or convey a specific copy of the covered work, then the patent license
-you grant is automatically extended to all recipients of the covered
-work and works based on it.
-
- A patent license is "discriminatory" if it does not include within
-the scope of its coverage, prohibits the exercise of, or is
-conditioned on the non-exercise of one or more of the rights that are
-specifically granted under this License. You may not convey a covered
-work if you are a party to an arrangement with a third party that is
-in the business of distributing software, under which you make payment
-to the third party based on the extent of your activity of conveying
-the work, and under which the third party grants, to any of the
-parties who would receive the covered work from you, a discriminatory
-patent license (a) in connection with copies of the covered work
-conveyed by you (or copies made from those copies), or (b) primarily
-for and in connection with specific products or compilations that
-contain the covered work, unless you entered into that arrangement,
-or that patent license was granted, prior to 28 March 2007.
-
- Nothing in this License shall be construed as excluding or limiting
-any implied license or other defenses to infringement that may
-otherwise be available to you under applicable patent law.
-
- 12. No Surrender of Others' Freedom.
-
- If conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot convey a
-covered work so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you may
-not convey it at all. For example, if you agree to terms that obligate you
-to collect a royalty for further conveying from those to whom you convey
-the Program, the only way you could satisfy both those terms and this
-License would be to refrain entirely from conveying the Program.
-
- 13. Remote Network Interaction; Use with the GNU General Public License.
-
- Notwithstanding any other provision of this License, if you modify the
-Program, your modified version must prominently offer all users
-interacting with it remotely through a computer network (if your version
-supports such interaction) an opportunity to receive the Corresponding
-Source of your version by providing access to the Corresponding Source
-from a network server at no charge, through some standard or customary
-means of facilitating copying of software. This Corresponding Source
-shall include the Corresponding Source for any work covered by version 3
-of the GNU General Public License that is incorporated pursuant to the
-following paragraph.
-
- Notwithstanding any other provision of this License, you have
-permission to link or combine any covered work with a work licensed
-under version 3 of the GNU General Public License into a single
-combined work, and to convey the resulting work. The terms of this
-License will continue to apply to the part which is the covered work,
-but the work with which it is combined will remain governed by version
-3 of the GNU General Public License.
-
- 14. Revised Versions of this License.
-
- The Free Software Foundation may publish revised and/or new versions of
-the GNU Affero General Public License from time to time. Such new versions
-will be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
- Each version is given a distinguishing version number. If the
-Program specifies that a certain numbered version of the GNU Affero General
-Public License "or any later version" applies to it, you have the
-option of following the terms and conditions either of that numbered
-version or of any later version published by the Free Software
-Foundation. If the Program does not specify a version number of the
-GNU Affero General Public License, you may choose any version ever published
-by the Free Software Foundation.
-
- If the Program specifies that a proxy can decide which future
-versions of the GNU Affero General Public License can be used, that proxy's
-public statement of acceptance of a version permanently authorizes you
-to choose that version for the Program.
-
- Later license versions may give you additional or different
-permissions. However, no additional obligations are imposed on any
-author or copyright holder as a result of your choosing to follow a
-later version.
-
- 15. Disclaimer of Warranty.
-
- THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
-APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
-HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
-OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
-THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
-IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
-ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
- 16. Limitation of Liability.
-
- IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
-THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
-GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
-USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
-DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
-PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
-EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGES.
-
- 17. Interpretation of Sections 15 and 16.
-
- If the disclaimer of warranty and limitation of liability provided
-above cannot be given local legal effect according to their terms,
-reviewing courts shall apply local law that most closely approximates
-an absolute waiver of all civil liability in connection with the
-Program, unless a warranty or assumption of liability accompanies a
-copy of the Program in return for a fee.
-
- END OF TERMS AND CONDITIONS
-
- How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
- To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-state the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
- <one line to give the program's name and a brief idea of what it does.>
- Copyright (C) <year> <name of author>
-
- This program is free software: you can redistribute it and/or modify
- it under the terms of the GNU Affero General Public License as published by
- the Free Software Foundation, either version 3 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU Affero General Public License for more details.
-
- You should have received a copy of the GNU Affero General Public License
- along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-Also add information on how to contact you by electronic and paper mail.
-
- If your software can interact with users remotely through a computer
-network, you should also make sure that it provides a way for users to
-get its source. For example, if your program is a web application, its
-interface could display a "Source" link that leads users to an archive
-of the code. There are many ways you could offer source, and different
-solutions will be better for different programs; see section 13 for the
-specific requirements.
-
- You should also get your employer (if you work as a programmer) or school,
-if any, to sign a "copyright disclaimer" for the program, if necessary.
-For more information on this, and how to apply and follow the GNU AGPL, see
-<http://www.gnu.org/licenses/>.
diff --git a/LICENSE b/LICENSE
index 817427ae..8dfc62ad 100644
--- a/LICENSE
+++ b/LICENSE
@@ -35,10 +35,6 @@ src/pulsecore/filter/LICENSE.WEBKIT for details.
Additionally, a more permissive Sun license is used for code that performs
u-law, A-law and linear PCM conversions.
-The qpaeq program (src/utils/qpaeq) is licensed under the GNU Affero General
-Public License (version 3, or any later version at your discretion). See the
-file AGPL for details.
-
While we attempt to provide a summary here, it is the ultimate responsibility of
the packager to ensure the components they use in their build of PulseAudio
meets their license requirements.
diff --git a/Makefile.am b/Makefile.am
index 1f460a97..9a6b42a9 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -16,7 +16,6 @@
ACLOCAL_AMFLAGS = -I m4
EXTRA_DIST = \
- AGPL \
bootstrap.sh \
coverity/model.c \
git-version-gen \
diff --git a/src/utils/qpaeq b/src/utils/qpaeq
index ac4b9e4a..f657659d 100755
--- a/src/utils/qpaeq
+++ b/src/utils/qpaeq
@@ -3,16 +3,16 @@
# Copyright (C) 2009 Jason Newton <nevion@gmail.com
#
# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU Affero General Public License as
-# published by the Free Software Foundation, either version 3 of the
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation, either version 2.1 of the
# License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU Affero General Public License for more details.
+# GNU Lesser General Public License for more details.
#
-# You should have received a copy of the GNU Affero General Public License
+# You should have received a copy of the GNU Lesser General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
--
2.14.3

380
0035-alsa-mixer-Prioritize-hdmi-mappings-over-iec958-mapp.patch
View File

@ -1,380 +0,0 @@
From 184c28795bb98ad14bdfcef01a475d5ba11e40d5 Mon Sep 17 00:00:00 2001
From: Kristian Klausen <klausenbusk@hotmail.com>
Date: Fri, 22 Sep 2017 17:54:14 +0000
Subject: [PATCH 35/48] alsa-mixer: Prioritize hdmi-* mappings over iec958-*
mappings
Pulseaudio tries to pick the best profile (on startup or
hotplugged), the best profile is the profile with the highest
priority which isn't unavailable.
Due to the facts that iec958 ports available status always (?)
is unknown, and that it is generally more likely that a user use
hdmi than iec958, lets prioritze hdmi over iec958.
This patch shift the analog-* mappings +5 and hdmi-* mappings +5.
---
src/modules/alsa/mixer/profile-sets/default.conf | 80 ++++++++++++------------
1 file changed, 40 insertions(+), 40 deletions(-)
diff --git a/src/modules/alsa/mixer/profile-sets/default.conf b/src/modules/alsa/mixer/profile-sets/default.conf
index c360e772..f5093830 100644
--- a/src/modules/alsa/mixer/profile-sets/default.conf
+++ b/src/modules/alsa/mixer/profile-sets/default.conf
@@ -106,14 +106,14 @@ device-strings = hw:%f
channel-map = mono
paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono
paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headset-mic
-priority = 2
+priority = 7
[Mapping analog-stereo]
device-strings = front:%f
channel-map = left,right
paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2
paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic
-priority = 10
+priority = 15
# If everything else fails, try to use hw:0 as a stereo device.
[Mapping stereo-fallback]
@@ -128,35 +128,35 @@ priority = 1
device-strings = surround21:%f
channel-map = front-left,front-right,lfe
paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 8
+priority = 13
direction = output
[Mapping analog-surround-40]
device-strings = surround40:%f
channel-map = front-left,front-right,rear-left,rear-right
paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 7
+priority = 12
direction = output
[Mapping analog-surround-41]
device-strings = surround41:%f
channel-map = front-left,front-right,rear-left,rear-right,lfe
paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 8
+priority = 13
direction = output
[Mapping analog-surround-50]
device-strings = surround50:%f
channel-map = front-left,front-right,rear-left,rear-right,front-center
paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 7
+priority = 12
direction = output
[Mapping analog-surround-51]
device-strings = surround51:%f
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 8
+priority = 13
direction = output
[Mapping analog-surround-71]
@@ -164,7 +164,7 @@ device-strings = surround71:%f
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
description = Analog Surround 7.1
paths-output = analog-output analog-output-lineout analog-output-speaker
-priority = 7
+priority = 12
direction = output
[Mapping iec958-stereo]
@@ -200,7 +200,7 @@ description = Digital Stereo (HDMI)
device-strings = hdmi:%f
paths-output = hdmi-output-0
channel-map = left,right
-priority = 4
+priority = 9
direction = output
[Mapping hdmi-surround]
@@ -208,7 +208,7 @@ description = Digital Surround 5.1 (HDMI)
device-strings = hdmi:%f
paths-output = hdmi-output-0
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 3
+priority = 8
direction = output
[Mapping hdmi-surround71]
@@ -216,7 +216,7 @@ description = Digital Surround 7.1 (HDMI)
device-strings = hdmi:%f
paths-output = hdmi-output-0
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 3
+priority = 8
direction = output
[Mapping hdmi-dts-surround]
@@ -224,7 +224,7 @@ description = Digital Surround 5.1 (HDMI/DTS)
device-strings = dcahdmi:%f
paths-output = hdmi-output-0
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 1
+priority = 6
direction = output
[Mapping hdmi-stereo-extra1]
@@ -232,7 +232,7 @@ description = Digital Stereo (HDMI 2)
device-strings = hdmi:%f,1
paths-output = hdmi-output-1
channel-map = left,right
-priority = 2
+priority = 7
direction = output
[Mapping hdmi-surround-extra1]
@@ -240,7 +240,7 @@ description = Digital Surround 5.1 (HDMI 2)
device-strings = hdmi:%f,1
paths-output = hdmi-output-1
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 1
+priority = 6
direction = output
[Mapping hdmi-surround71-extra1]
@@ -248,7 +248,7 @@ description = Digital Surround 7.1 (HDMI 2)
device-strings = hdmi:%f,1
paths-output = hdmi-output-1
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 1
+priority = 6
direction = output
[Mapping hdmi-dts-surround-extra1]
@@ -256,7 +256,7 @@ description = Digital Surround 5.1 (HDMI 2/DTS)
device-strings = dcahdmi:%f,1
paths-output = hdmi-output-1
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 1
+priority = 6
direction = output
[Mapping hdmi-stereo-extra2]
@@ -264,7 +264,7 @@ description = Digital Stereo (HDMI 3)
device-strings = hdmi:%f,2
paths-output = hdmi-output-2
channel-map = left,right
-priority = 2
+priority = 7
direction = output
[Mapping hdmi-surround-extra2]
@@ -272,7 +272,7 @@ description = Digital Surround 5.1 (HDMI 3)
device-strings = hdmi:%f,2
paths-output = hdmi-output-2
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 1
+priority = 6
direction = output
[Mapping hdmi-surround71-extra2]
@@ -280,7 +280,7 @@ description = Digital Surround 7.1 (HDMI 3)
device-strings = hdmi:%f,2
paths-output = hdmi-output-2
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 1
+priority = 6
direction = output
[Mapping hdmi-dts-surround-extra2]
@@ -288,7 +288,7 @@ description = Digital Surround 5.1 (HDMI 3/DTS)
device-strings = dcahdmi:%f,2
paths-output = hdmi-output-2
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 1
+priority = 6
direction = output
[Mapping hdmi-stereo-extra3]
@@ -296,7 +296,7 @@ description = Digital Stereo (HDMI 4)
device-strings = hdmi:%f,3
paths-output = hdmi-output-3
channel-map = left,right
-priority = 2
+priority = 7
direction = output
[Mapping hdmi-surround-extra3]
@@ -304,7 +304,7 @@ description = Digital Surround 5.1 (HDMI 4)
device-strings = hdmi:%f,3
paths-output = hdmi-output-3
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 1
+priority = 6
direction = output
[Mapping hdmi-surround71-extra3]
@@ -312,7 +312,7 @@ description = Digital Surround 7.1 (HDMI 4)
device-strings = hdmi:%f,3
paths-output = hdmi-output-3
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 1
+priority = 6
direction = output
[Mapping hdmi-dts-surround-extra3]
@@ -320,7 +320,7 @@ description = Digital Surround 5.1 (HDMI 4/DTS)
device-strings = dcahdmi:%f,3
paths-output = hdmi-output-3
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 1
+priority = 6
direction = output
[Mapping hdmi-stereo-extra4]
@@ -328,7 +328,7 @@ description = Digital Stereo (HDMI 5)
device-strings = hdmi:%f,4
paths-output = hdmi-output-4
channel-map = left,right
-priority = 2
+priority = 7
direction = output
[Mapping hdmi-surround-extra4]
@@ -336,7 +336,7 @@ description = Digital Surround 5.1 (HDMI 5)
device-strings = hdmi:%f,4
paths-output = hdmi-output-4
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 1
+priority = 6
direction = output
[Mapping hdmi-surround71-extra4]
@@ -344,7 +344,7 @@ description = Digital Surround 7.1 (HDMI 5)
device-strings = hdmi:%f,4
paths-output = hdmi-output-4
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 1
+priority = 6
direction = output
[Mapping hdmi-dts-surround-extra4]
@@ -352,7 +352,7 @@ description = Digital Surround 5.1 (HDMI 5/DTS)
device-strings = dcahdmi:%f,4
paths-output = hdmi-output-4
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 1
+priority = 6
direction = output
[Mapping hdmi-stereo-extra5]
@@ -360,7 +360,7 @@ description = Digital Stereo (HDMI 6)
device-strings = hdmi:%f,5
paths-output = hdmi-output-5
channel-map = left,right
-priority = 2
+priority = 7
direction = output
[Mapping hdmi-surround-extra5]
@@ -368,7 +368,7 @@ description = Digital Surround 5.1 (HDMI 6)
device-strings = hdmi:%f,5
paths-output = hdmi-output-5
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 1
+priority = 6
direction = output
[Mapping hdmi-surround71-extra5]
@@ -376,7 +376,7 @@ description = Digital Surround 7.1 (HDMI 6)
device-strings = hdmi:%f,5
paths-output = hdmi-output-5
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 1
+priority = 6
direction = output
[Mapping hdmi-dts-surround-extra5]
@@ -384,7 +384,7 @@ description = Digital Surround 5.1 (HDMI 6/DTS)
device-strings = dcahdmi:%f,5
paths-output = hdmi-output-5
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 1
+priority = 6
direction = output
[Mapping hdmi-stereo-extra6]
@@ -392,7 +392,7 @@ description = Digital Stereo (HDMI 7)
device-strings = hdmi:%f,6
paths-output = hdmi-output-6
channel-map = left,right
-priority = 2
+priority = 7
direction = output
[Mapping hdmi-surround-extra6]
@@ -400,7 +400,7 @@ description = Digital Surround 5.1 (HDMI 7)
device-strings = hdmi:%f,6
paths-output = hdmi-output-6
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 1
+priority = 6
direction = output
[Mapping hdmi-surround71-extra6]
@@ -408,7 +408,7 @@ description = Digital Surround 7.1 (HDMI 7)
device-strings = hdmi:%f,6
paths-output = hdmi-output-6
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 1
+priority = 6
direction = output
[Mapping hdmi-dts-surround-extra6]
@@ -416,7 +416,7 @@ description = Digital Surround 5.1 (HDMI 7/DTS)
device-strings = dcahdmi:%f,6
paths-output = hdmi-output-6
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 1
+priority = 6
direction = output
[Mapping hdmi-stereo-extra7]
@@ -424,7 +424,7 @@ description = Digital Stereo (HDMI 8)
device-strings = hdmi:%f,7
paths-output = hdmi-output-7
channel-map = left,right
-priority = 2
+priority = 7
direction = output
[Mapping hdmi-surround-extra7]
@@ -432,7 +432,7 @@ description = Digital Surround 5.1 (HDMI 8)
device-strings = hdmi:%f,7
paths-output = hdmi-output-7
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 1
+priority = 6
direction = output
[Mapping hdmi-surround71-extra7]
@@ -440,7 +440,7 @@ description = Digital Surround 7.1 (HDMI 8)
device-strings = hdmi:%f,7
paths-output = hdmi-output-7
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
-priority = 1
+priority = 6
direction = output
[Mapping hdmi-dts-surround-extra7]
@@ -448,7 +448,7 @@ description = Digital Surround 5.1 (HDMI 8/DTS)
device-strings = dcahdmi:%f,7
paths-output = hdmi-output-7
channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
-priority = 1
+priority = 6
direction = output
[Mapping multichannel-output]
--
2.13.6

27
0074-build-sys-add-the-Dell-dock-TB16-configuration.patch
View File

@ -1,27 +0,0 @@
From 2f1dcea363342154a1f6af7bd4ade3f87403b744 Mon Sep 17 00:00:00 2001
From: Hui Wang <hui.wang@canonical.com>
Date: Mon, 13 Nov 2017 10:17:19 +0800
Subject: [PATCH 74/85] build-sys: add the Dell dock TB16 configuration
Signed-off-by: Hui Wang <hui.wang@canonical.com>
---
src/Makefile.am | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/src/Makefile.am b/src/Makefile.am
index e610db74..03482502 100644
--- a/src/Makefile.am
+++ b/src/Makefile.am
@@ -1312,7 +1312,8 @@ dist_alsaprofilesets_DATA = \
modules/alsa/mixer/profile-sets/native-instruments-korecontroller.conf \
modules/alsa/mixer/profile-sets/kinect-audio.conf \
modules/alsa/mixer/profile-sets/sb-omni-surround-5.1.conf \
- modules/alsa/mixer/profile-sets/steelseries-arctis-usb-audio.conf
+ modules/alsa/mixer/profile-sets/steelseries-arctis-usb-audio.conf \
+ modules/alsa/mixer/profile-sets/dell-dock-tb16-usb-audio.conf
if HAVE_UDEV
dist_udevrules_DATA = \
--
2.14.3

59
0084-sink-source-Don-t-finish-move-if-unlink-happens-afte.patch
View File

@ -1,59 +0,0 @@
From 59d264ac56d644f626251daa44ef7b39a9a9fe03 Mon Sep 17 00:00:00 2001
From: Georg Chini <georg@chini.tk>
Date: Sun, 3 Dec 2017 22:29:09 +0100
Subject: [PATCH 84/85] sink, source: Don't finish move if unlink happens after
pa_*_move_all_start()
When a sink input was unlinked between the calls to pa_sink_move_all_start() and
pa_sink_move_all_finish(), pa_sink_move_all_finish() tried to finish the move
of the already unlinked sink input, which lead to an assertion in
pa_sink_input_finish_move(). The same applies for the source side.
This patch fixes the problem by checking the state of the sink input or
source output in pa_*_move_all_finish().
Bug report: https://bugs.freedesktop.org/show_bug.cgi?id=103752
---
src/pulsecore/sink.c | 6 ++++--
src/pulsecore/source.c | 6 ++++--
2 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/src/pulsecore/sink.c b/src/pulsecore/sink.c
index 017b9539..39bf18f1 100644
--- a/src/pulsecore/sink.c
+++ b/src/pulsecore/sink.c
@@ -920,9 +920,11 @@ void pa_sink_move_all_finish(pa_sink *s, pa_queue *q, bool save) {
pa_assert(q);
while ((i = PA_SINK_INPUT(pa_queue_pop(q)))) {
- if (pa_sink_input_finish_move(i, s, save) < 0)
- pa_sink_input_fail_move(i);
+ if (PA_SINK_INPUT_IS_LINKED(i->state)) {
+ if (pa_sink_input_finish_move(i, s, save) < 0)
+ pa_sink_input_fail_move(i);
+ }
pa_sink_input_unref(i);
}
diff --git a/src/pulsecore/source.c b/src/pulsecore/source.c
index d579c357..6099c10d 100644
--- a/src/pulsecore/source.c
+++ b/src/pulsecore/source.c
@@ -860,9 +860,11 @@ void pa_source_move_all_finish(pa_source *s, pa_queue *q, bool save) {
pa_assert(q);
while ((o = PA_SOURCE_OUTPUT(pa_queue_pop(q)))) {
- if (pa_source_output_finish_move(o, s, save) < 0)
- pa_source_output_fail_move(o);
+ if (PA_SOURCE_OUTPUT_IS_LINKED(o->state)) {
+ if (pa_source_output_finish_move(o, s, save) < 0)
+ pa_source_output_fail_move(o);
+ }
pa_source_output_unref(o);
}
--
2.14.3

25
0085-client-conf-Add-a-default-value-for-disable-memfd.patch
View File

@ -1,25 +0,0 @@
From 2062fc8b0e69f383cfd4c4773bf8b9dcef20e035 Mon Sep 17 00:00:00 2001
From: Arun Raghavan <arun@arunraghavan.net>
Date: Fri, 27 Oct 2017 09:29:19 +0530
Subject: [PATCH 085/106] client-conf: Add a default value for disable-memfd
This got missed while adding the client option.
---
src/pulse/client-conf.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/src/pulse/client-conf.c b/src/pulse/client-conf.c
index a3c9486d..1daaf911 100644
--- a/src/pulse/client-conf.c
+++ b/src/pulse/client-conf.c
@@ -65,6 +65,7 @@ static const pa_client_conf default_conf = {
.cookie_file_from_client_conf = NULL,
.autospawn = true,
.disable_shm = false,
+ .disable_memfd = false,
.shm_size = 0,
.auto_connect_localhost = false,
.auto_connect_display = false
--
2.14.3

201
0090-qpaeq-port-to-PyQt5.patch
View File

@ -1,201 +0,0 @@
From 480e0e74f43565d7ece72141666961ae8cc2ed75 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Andrius=20=C5=A0tikonas?= <andrius@stikonas.eu>
Date: Mon, 20 Nov 2017 19:56:53 +0000
Subject: [PATCH 090/106] qpaeq: port to PyQt5
---
src/utils/qpaeq | 68 ++++++++++++++++++++++++++++-----------------------------
1 file changed, 34 insertions(+), 34 deletions(-)
diff --git a/src/utils/qpaeq b/src/utils/qpaeq
index f657659d..651d3a4e 100755
--- a/src/utils/qpaeq
+++ b/src/utils/qpaeq
@@ -18,13 +18,13 @@
import os,math,sys
try:
- import PyQt4,sip
- from PyQt4 import QtGui,QtCore
+ import PyQt5,sip
+ from PyQt5 import QtWidgets,QtCore
import dbus.mainloop.qt
import dbus
except ImportError as e:
sys.stderr.write('There was an error importing needed libraries\n'
- 'Make sure you have qt4 and dbus-python installed\n'
+ 'Make sure you have qt5 and dbus-python installed\n'
'The error that occured was:\n'
'\t%s\n' % (str(e)))
sys.exit(-1)
@@ -62,7 +62,7 @@ def connect():
prop_iface='org.freedesktop.DBus.Properties'
eq_iface='org.PulseAudio.Ext.Equalizing1.Equalizer'
device_iface='org.PulseAudio.Core1.Device'
-class QPaeq(QtGui.QWidget):
+class QPaeq(QtWidgets.QWidget):
manager_path='/org/pulseaudio/equalizing1'
manager_iface='org.PulseAudio.Ext.Equalizing1.Manager'
core_iface='org.PulseAudio.Core1'
@@ -70,7 +70,7 @@ class QPaeq(QtGui.QWidget):
module_name='module-equalizer-sink'
def __init__(self):
- QtGui.QWidget.__init__(self)
+ QtWidgets.QWidget.__init__(self)
self.setWindowTitle('qpaeq')
self.slider_widget=None
self.sink_name=None
@@ -84,50 +84,50 @@ class QPaeq(QtGui.QWidget):
self.setMinimumSize(self.sizeHint())
def create_layout(self):
- self.main_layout=QtGui.QVBoxLayout()
+ self.main_layout=QtWidgets.QVBoxLayout()
self.setLayout(self.main_layout)
- toprow_layout=QtGui.QHBoxLayout()
- sizePolicy = QtGui.QSizePolicy(QtGui.QSizePolicy.Preferred, QtGui.QSizePolicy.Fixed)
+ toprow_layout=QtWidgets.QHBoxLayout()
+ sizePolicy = QtWidgets.QSizePolicy(QtWidgets.QSizePolicy.Preferred, QtWidgets.QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
#sizePolicy.setHeightForWidth(self.profile_box.sizePolicy().hasHeightForWidth())
- toprow_layout.addWidget(QtGui.QLabel('Sink'))
- self.sink_box = QtGui.QComboBox()
+ toprow_layout.addWidget(QtWidgets.QLabel('Sink'))
+ self.sink_box = QtWidgets.QComboBox()
self.sink_box.setSizePolicy(sizePolicy)
self.sink_box.setDuplicatesEnabled(False)
- self.sink_box.setInsertPolicy(QtGui.QComboBox.InsertAlphabetically)
- #self.sink_box.setSizeAdjustPolicy(QtGui.QComboBox.AdjustToContents)
+ self.sink_box.setInsertPolicy(QtWidgets.QComboBox.InsertAlphabetically)
+ #self.sink_box.setSizeAdjustPolicy(QtWidgets.QComboBox.AdjustToContents)
toprow_layout.addWidget(self.sink_box)
- toprow_layout.addWidget(QtGui.QLabel('Channel'))
- self.channel_box = QtGui.QComboBox()
+ toprow_layout.addWidget(QtWidgets.QLabel('Channel'))
+ self.channel_box = QtWidgets.QComboBox()
self.channel_box.setSizePolicy(sizePolicy)
toprow_layout.addWidget(self.channel_box)
- toprow_layout.addWidget(QtGui.QLabel('Preset'))
- self.profile_box = QtGui.QComboBox()
+ toprow_layout.addWidget(QtWidgets.QLabel('Preset'))
+ self.profile_box = QtWidgets.QComboBox()
self.profile_box.setSizePolicy(sizePolicy)
- self.profile_box.setInsertPolicy(QtGui.QComboBox.InsertAlphabetically)
- #self.profile_box.setSizeAdjustPolicy(QtGui.QComboBox.AdjustToContents)
+ self.profile_box.setInsertPolicy(QtWidgets.QComboBox.InsertAlphabetically)
+ #self.profile_box.setSizeAdjustPolicy(QtWidgets.QComboBox.AdjustToContents)
toprow_layout.addWidget(self.profile_box)
- large_icon_size=self.style().pixelMetric(QtGui.QStyle.PM_LargeIconSize)
+ large_icon_size=self.style().pixelMetric(QtWidgets.QStyle.PM_LargeIconSize)
large_icon_size=QtCore.QSize(large_icon_size,large_icon_size)
- save_profile=QtGui.QToolButton()
- save_profile.setIcon(self.style().standardIcon(QtGui.QStyle.SP_DriveFDIcon))
+ save_profile=QtWidgets.QToolButton()
+ save_profile.setIcon(self.style().standardIcon(QtWidgets.QStyle.SP_DriveFDIcon))
save_profile.setIconSize(large_icon_size)
save_profile.setToolButtonStyle(QtCore.Qt.ToolButtonIconOnly)
save_profile.clicked.connect(self.save_profile)
- remove_profile=QtGui.QToolButton()
- remove_profile.setIcon(self.style().standardIcon(QtGui.QStyle.SP_TrashIcon))
+ remove_profile=QtWidgets.QToolButton()
+ remove_profile.setIcon(self.style().standardIcon(QtWidgets.QStyle.SP_TrashIcon))
remove_profile.setIconSize(large_icon_size)
remove_profile.setToolButtonStyle(QtCore.Qt.ToolButtonIconOnly)
remove_profile.clicked.connect(self.remove_profile)
toprow_layout.addWidget(save_profile)
toprow_layout.addWidget(remove_profile)
- reset_button = QtGui.QPushButton('Reset')
+ reset_button = QtWidgets.QPushButton('Reset')
reset_button.clicked.connect(self.reset)
toprow_layout.addStretch()
toprow_layout.addWidget(reset_button)
@@ -192,11 +192,11 @@ class QPaeq(QtGui.QWidget):
def save_profile(self):
#popup dialog box for name
current=self.profile_box.currentIndex()
- profile,ok=QtGui.QInputDialog.getItem(self,'Preset Name','Preset',self.profiles,current)
+ profile,ok=QtWidgets.QInputDialog.getItem(self,'Preset Name','Preset',self.profiles,current)
if not ok or profile=='':
return
if profile in self.profiles:
- mbox=QtGui.QMessageBox(self)
+ mbox=QtWidgets.QMessageBox(self)
mbox.setText('%s preset already exists'%(profile,))
mbox.setInformativeText('Do you want to save over it?')
mbox.setStandardButtons(mbox.Save|mbox.Discard|mbox.Cancel)
@@ -217,7 +217,7 @@ class QPaeq(QtGui.QWidget):
profile=self.profile_box.itemText(x)
self.filter_state.load_profile(profile)
def select_channel(self,x):
- self.filter_state.channel = self.channel_box.itemData(x).toPyObject()
+ self.filter_state.channel = self.channel_box.itemData(x)
self._set_profile_name()
self.filter_state.readback()
@@ -295,13 +295,13 @@ class QPaeq(QtGui.QWidget):
self.profile_box.blockSignals(False)
-class SliderArray(QtGui.QWidget):
+class SliderArray(QtWidgets.QWidget):
def __init__(self,filter_state,parent=None):
super(SliderArray,self).__init__(parent)
#self.setStyleSheet('padding: 0px; border-width: 0px; margin: 0px;')
#self.setStyleSheet('font-family: monospace;'+outline%('blue'))
self.filter_state=filter_state
- self.setLayout(QtGui.QHBoxLayout())
+ self.setLayout(QtWidgets.QHBoxLayout())
self.sub_array=None
self.set_sub_array(SliderArraySub(self.filter_state))
self.inhibit_resize=0
@@ -359,11 +359,11 @@ class SliderArray(QtGui.QWidget):
self.set_sub_array(SliderArraySub(self.filter_state))
self.inhibit_resize-=1
-class SliderArraySub(QtGui.QWidget):
+class SliderArraySub(QtWidgets.QWidget):
def __init__(self,filter_state,parent=None):
super(SliderArraySub,self).__init__(parent)
self.filter_state=filter_state
- self.setLayout(QtGui.QGridLayout())
+ self.setLayout(QtWidgets.QGridLayout())
self.slider=[None]*len(self.filter_state.frequencies)
self.label=[None]*len(self.slider)
#self.setStyleSheet('padding: 0px; border-width: 0px; margin: 0px;')
@@ -375,7 +375,7 @@ class SliderArraySub(QtGui.QWidget):
self.layout().addWidget(label,1,c,qt.AlignHCenter)
self.layout().setColumnMinimumWidth(c,max(label.sizeHint().width(),slider.sizeHint().width()))
def create_slider(slider_label):
- slider=QtGui.QSlider(QtCore.Qt.Vertical,self)
+ slider=QtWidgets.QSlider(QtCore.Qt.Vertical,self)
label=SliderLabel(slider_label,filter_state,self)
slider.setRange(-1000,2000)
slider.setSingleStep(1)
@@ -461,7 +461,7 @@ class SliderArraySub(QtGui.QWidget):
return int((x-1.0)*1000)
outline='border-width: 1px; border-style: solid; border-color: %s;'
-class SliderLabel(QtGui.QLabel):
+class SliderLabel(QtWidgets.QLabel):
clicked=QtCore.pyqtSignal()
def __init__(self,label_text,filter_state,parent=None):
super(SliderLabel,self).__init__(parent)
@@ -566,7 +566,7 @@ def subdivide(xs, t_points):
def main():
dbus.mainloop.qt.DBusQtMainLoop(set_as_default=True)
- app=QtGui.QApplication(sys.argv)
+ app=QtWidgets.QApplication(sys.argv)
qpaeq_main=QPaeq()
qpaeq_main.show()
sys.exit(app.exec_())
--
2.14.3

142
0093-alsa-fix-infinite-loop-with-Intel-HDMI-LPE.patch
View File

@ -1,142 +0,0 @@
From 94fc586c011537536cfb434376354699357af785 Mon Sep 17 00:00:00 2001
From: Tanu Kaskinen <tanuk@iki.fi>
Date: Thu, 28 Dec 2017 12:09:17 +0200
Subject: [PATCH 093/106] alsa: fix infinite loop with Intel HDMI LPE
The Intel HDMI LPE driver works in a peculiar way when the HDMI cable is
not plugged in: any written audio is immediately discarded and underrun
is reported. That resulted in an infinite loop, because PulseAudio tried
to keep the buffer filled, which was futile since the written audio was
immediately consumed/discarded.
This patch adds special handling for the LPE driver: if the active port
of the sink is unavailable, the sink suspends itself. A new suspend
cause is added: PA_SUSPEND_UNAVAILABLE.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=100488
---
src/modules/alsa/alsa-mixer.h | 1 +
src/modules/alsa/alsa-sink.c | 22 ++++++++++++++++++++++
src/modules/alsa/module-alsa-card.c | 34 ++++++++++++++++++++++++++++++++++
src/pulsecore/core.h | 1 +
4 files changed, 58 insertions(+)
diff --git a/src/modules/alsa/alsa-mixer.h b/src/modules/alsa/alsa-mixer.h
index 4ebf1922..3577f435 100644
--- a/src/modules/alsa/alsa-mixer.h
+++ b/src/modules/alsa/alsa-mixer.h
@@ -364,6 +364,7 @@ int pa_alsa_set_mixer_rtpoll(struct pa_alsa_mixer_pdata *pd, snd_mixer_t *mixer,
struct pa_alsa_port_data {
pa_alsa_path *path;
pa_alsa_setting *setting;
+ bool suspend_when_unavailable;
};
void pa_alsa_add_ports(void *sink_or_source_new_data, pa_alsa_path_set *ps, pa_card *card);
diff --git a/src/modules/alsa/alsa-sink.c b/src/modules/alsa/alsa-sink.c
index 7936cfac..a80caab2 100644
--- a/src/modules/alsa/alsa-sink.c
+++ b/src/modules/alsa/alsa-sink.c
@@ -1527,6 +1527,11 @@ static int sink_set_port_cb(pa_sink *s, pa_device_port *p) {
s->set_volume(s);
}
+ if (data->suspend_when_unavailable && p->available == PA_AVAILABLE_NO)
+ pa_sink_suspend(s, true, PA_SUSPEND_UNAVAILABLE);
+ else
+ pa_sink_suspend(s, false, PA_SUSPEND_UNAVAILABLE);
+
return 0;
}
@@ -2460,6 +2465,23 @@ pa_sink *pa_alsa_sink_new(pa_module *m, pa_modargs *ma, const char*driver, pa_ca
if (profile_set)
pa_alsa_profile_set_free(profile_set);
+ /* Suspend if necessary. FIXME: It would be better to start suspended, but
+ * that would require some core changes. It's possible to set
+ * pa_sink_new_data.suspend_cause, but that has to be done before the
+ * pa_sink_new() call, and we know if we need to suspend only after the
+ * pa_sink_new() call when the initial port has been chosen. Calling
+ * pa_sink_suspend() between pa_sink_new() and pa_sink_put() would
+ * otherwise work, but currently pa_sink_suspend() will crash if
+ * pa_sink_put() hasn't been called. */
+ if (u->sink->active_port) {
+ pa_alsa_port_data *port_data;
+
+ port_data = PA_DEVICE_PORT_DATA(u->sink->active_port);
+
+ if (port_data->suspend_when_unavailable && u->sink->active_port->available == PA_AVAILABLE_NO)
+ pa_sink_suspend(u->sink, true, PA_SUSPEND_UNAVAILABLE);
+ }
+
return u->sink;
fail:
diff --git a/src/modules/alsa/module-alsa-card.c b/src/modules/alsa/module-alsa-card.c
index 804b4f87..b193d40c 100644
--- a/src/modules/alsa/module-alsa-card.c
+++ b/src/modules/alsa/module-alsa-card.c
@@ -426,6 +426,22 @@ static int report_jack_state(snd_mixer_elem_t *melem, unsigned int mask) {
if (tp->avail == PA_AVAILABLE_NO)
pa_device_port_set_available(tp->port, tp->avail);
+ for (tp = tports; tp->port; tp++) {
+ pa_alsa_port_data *data;
+ pa_sink *sink;
+ uint32_t idx;
+
+ data = PA_DEVICE_PORT_DATA(tp->port);
+
+ if (!data->suspend_when_unavailable)
+ continue;
+
+ PA_IDXSET_FOREACH(sink, u->core->sinks, idx) {
+ if (sink->active_port == tp->port)
+ pa_sink_suspend(sink, tp->avail == PA_AVAILABLE_NO, PA_SUSPEND_UNAVAILABLE);
+ }
+ }
+
/* Update profile availabilities. The logic could be improved; for now we
* only set obviously unavailable profiles (those that contain only
* unavailable ports) to PA_AVAILABLE_NO and all others to
@@ -836,6 +852,24 @@ int pa__init(pa_module *m) {
goto fail;
}
+ /* The Intel HDMI LPE driver needs some special handling. When the HDMI
+ * cable is not plugged in, trying to play audio doesn't work. Any written
+ * audio is immediately discarded and an underrun is reported, and that
+ * results in an infinite loop of "fill buffer, handle underrun". To work
+ * around this issue, the suspend_when_unavailable flag is used to stop
+ * playback when the HDMI cable is unplugged. */
+ if (pa_safe_streq(pa_proplist_gets(data.proplist, "alsa.driver_name"), "snd_hdmi_lpe_audio")) {
+ pa_device_port *port;
+ void *state;
+
+ PA_HASHMAP_FOREACH(port, data.ports, state) {
+ pa_alsa_port_data *port_data;
+
+ port_data = PA_DEVICE_PORT_DATA(port);
+ port_data->suspend_when_unavailable = true;
+ }
+ }
+
u->card = pa_card_new(m->core, &data);
pa_card_new_data_done(&data);
diff --git a/src/pulsecore/core.h b/src/pulsecore/core.h
index 79a095d2..afe6c25e 100644
--- a/src/pulsecore/core.h
+++ b/src/pulsecore/core.h
@@ -34,6 +34,7 @@ typedef enum pa_suspend_cause {
PA_SUSPEND_SESSION = 8, /* Used by module-hal for mark inactive sessions */
PA_SUSPEND_PASSTHROUGH = 16, /* Used to suspend monitor sources when the sink is in passthrough mode */
PA_SUSPEND_INTERNAL = 32, /* This is used for short period server-internal suspends, such as for sample rate updates */
+ PA_SUSPEND_UNAVAILABLE = 64, /* Used by device implementations that have to suspend when the device is unavailable */
PA_SUSPEND_ALL = 0xFFFF /* Magic cause that can be used to resume forcibly */
} pa_suspend_cause_t;
--
2.14.3

63
0106-memfd-wrappers-only-define-memfd_create-if-not-alrea.patch
View File

@ -1,63 +0,0 @@
From dfb0460fb4743aec047cdf755a660a9ac2d0f3fb Mon Sep 17 00:00:00 2001
From: Tanu Kaskinen <tanuk@iki.fi>
Date: Wed, 24 Jan 2018 03:51:49 +0200
Subject: [PATCH 106/106] memfd-wrappers: only define memfd_create() if not
already defined
glibc 2.27 is to be released soon, and it will provide memfd_create().
If glibc provides the function, we must not define it ourselves,
otherwise building fails due to conflict between the two implementations
of the same function.
BugLink: https://bugs.freedesktop.org/show_bug.cgi?id=104733
---
configure.ac | 3 +++
src/pulsecore/memfd-wrappers.h | 7 ++++---
2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/configure.ac b/configure.ac
index 0084c86e..0eb44b08 100644
--- a/configure.ac
+++ b/configure.ac
@@ -610,6 +610,9 @@ AS_IF([test "x$enable_memfd" = "xyes" && test "x$HAVE_MEMFD" = "x0"],
[AC_MSG_ERROR([*** Your Linux kernel does not support memfd shared memory.
*** Use linux v3.17 or higher for such a feature.])])
+AS_IF([test "x$HAVE_MEMFD" = "x1"],
+ AC_CHECK_FUNCS([memfd_create]))
+
AC_SUBST(HAVE_MEMFD)
AM_CONDITIONAL([HAVE_MEMFD], [test "x$HAVE_MEMFD" = x1])
AS_IF([test "x$HAVE_MEMFD" = "x1"], AC_DEFINE([HAVE_MEMFD], 1, [Have memfd shared memory.]))
diff --git a/src/pulsecore/memfd-wrappers.h b/src/pulsecore/memfd-wrappers.h
index 3bed9b2b..c7aadfd3 100644
--- a/src/pulsecore/memfd-wrappers.h
+++ b/src/pulsecore/memfd-wrappers.h
@@ -20,13 +20,14 @@
License along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
***/
-#ifdef HAVE_MEMFD
+#if defined(HAVE_MEMFD) && !defined(HAVE_MEMFD_CREATE)
#include <sys/syscall.h>
#include <fcntl.h>
/*
- * No glibc wrappers exist for memfd_create(2), so provide our own.
+ * Before glibc version 2.27 there was no wrapper for memfd_create(2),
+ * so we have to provide our own.
*
* Also define memfd fcntl sealing macros. While they are already
* defined in the kernel header file <linux/fcntl.h>, that file as
@@ -63,6 +64,6 @@ static inline int memfd_create(const char *name, unsigned int flags) {
#define F_SEAL_WRITE 0x0008 /* prevent writes */
#endif
-#endif /* HAVE_MEMFD */
+#endif /* HAVE_MEMFD && !HAVE_MEMFD_CREATE */
#endif
--
2.14.3

55
pulseaudio.spec
View File

@ -1,10 +1,10 @@
%global pa_major 11.1
#global pa_minor 0
#global snap 20141103
#global gitrel 327
#global gitcommit aec811798cd883a454b9b5cd82c77831906bbd2d
#global shortcommit (c=%{gitcommit}; echo ${c:0:5})
%global snap 20180411
%global gitrel 129
%global gitcommit ba2b748d40f78b9d9f945b5422ca74d05f8d0d07
%global shortcommit %(c=%{gitcommit}; echo ${c:0:5})
# webrtc bits go wonky without this
# see also https://lists.fedoraproject.org/archives/list/devel@lists.fedoraproject.org/thread/JQQ66XJSIT2FGTK2YQY7AXMEH5IXMPUX/
@ -39,7 +39,7 @@
Name: pulseaudio
Summary: Improved Linux Sound Server
Version: %{pa_major}%{?pa_minor:.%{pa_minor}}
Release: 19%{?snap:.%{snap}git%{shortcommit}}%{?dist}
Release: 20%{?snap:.%{snap}git%{shortcommit}}%{?dist}
License: LGPLv2+
URL: http://www.freedesktop.org/wiki/Software/PulseAudio
%if 0%{?gitrel}
@ -79,32 +79,13 @@ Patch205: pulseaudio-11.1-glibc_memfd.patch
Patch206: pulseaudio-11.1-autospawn_disable.patch
## upstream patches
Patch4: 0004-alsa-mixer-Add-support-for-usb-audio-in-the-Dell-doc.patch
Patch9: 0009-alsa-mixer-set-PCM-Capture-Source-for-iec958-input.patch
Patch10: 0010-build-sys-add-iec958-stereo-input.conf-to-dist_alsap.patch
Patch15: 0015-alsa-mixer-round-not-truncate-in-to_alsa_dB.patch
Patch16: 0016-alsa-mixer-add-support-for-Steelseries-Arctis-7-head.patch
Patch18: 0018-build-sys-add-the-Arctis-configuration.patch
Patch33: 0033-qpaeq-change-license-from-AGPL-to-LGPL-v2.1.patch
Patch35: 0035-alsa-mixer-Prioritize-hdmi-mappings-over-iec958-mapp.patch
Patch74: 0074-build-sys-add-the-Dell-dock-TB16-configuration.patch
Patch84: 0084-sink-source-Don-t-finish-move-if-unlink-happens-afte.patch
Patch85: 0085-client-conf-Add-a-default-value-for-disable-memfd.patch
Patch90: 0090-qpaeq-port-to-PyQt5.patch
Patch93: 0093-alsa-fix-infinite-loop-with-Intel-HDMI-LPE.patch
Patch96: 0106-memfd-wrappers-only-define-memfd_create-if-not-alrea.patch
## upstreamable patches
# patchset from https://bugs.freedesktop.org/show_bug.cgi?id=100488
Patch100: Fix-Intel-HDMI-LPE-problems.patch
# patchset from https://bugs.freedesktop.org/show_bug.cgi?id=93898
Patch101: v5-1-4-bluetooth-use-consistent-profile-names.patch
Patch102: v5-2-4-bluetooth-separate-HSP-and-HFP.patch
Patch103: v5-3-4-bluetooth-add-correct-HFP-rfcomm-negotiation.patch
Patch104: v5-4-4-bluetooth-make-native-the-default-backend.patch
# patchset from https://bugs.freedesktop.org/show_bug.cgi?id=100488 fixing pa
# crashing on Bay/Cherry Trail unless realtime-scheduling=no is set
Patch106: Fix-realtime-scheduling-on-byt-cht.patch
BuildRequires: automake libtool
BuildRequires: gcc-c++
@ -299,25 +280,8 @@ This package contains GDM integration hooks for the PulseAudio sound server.
%setup -q -T -b0 -n %{name}-%{version}%{?gitrel:-%{gitrel}-g%{shortcommit}}
## upstream patches
%patch4 -p1
%patch9 -p1
%patch10 -p1
%patch15 -p1
%patch16 -p1
%patch18 -p1
%patch33 -p1
%patch35 -p1
%patch74 -p1
%patch84 -p1
%patch85 -p1
%patch90 -p1
# skip patch, possibly regressionish, https://bugzilla.redhat.com/show_bug.cgi?id=1551270
#patch93 -p1
%patch96 -p1
## upstreamable patches
## per comments in the upstream bug, it would *appear* this one is no longer needed after applying patch93
#patch100 -p1
# rawhide-only, for now, on hadess' advice --rex
%if 0%{?fedora} > 27
%patch101 -p1
@ -325,7 +289,6 @@ This package contains GDM integration hooks for the PulseAudio sound server.
%patch103 -p1
%patch104 -p1
%endif
%patch106 -p1
%patch201 -p1 -b .autostart
%patch202 -p1 -b .disable_flat_volumes
@ -571,6 +534,7 @@ exit 0
%{_libdir}/pulse-%{pa_major}/modules/module-ladspa-sink.so
%{_libdir}/pulse-%{pa_major}/modules/module-remap-sink.so
%{_libdir}/pulse-%{pa_major}/modules/module-always-sink.so
%{_libdir}/pulse-%{pa_major}/modules/module-always-source.so
%{_libdir}/pulse-%{pa_major}/modules/module-console-kit.so
%{_libdir}/pulse-%{pa_major}/modules/module-position-event-sounds.so
%{_libdir}/pulse-%{pa_major}/modules/module-augment-properties.so
@ -718,6 +682,13 @@ exit 0
%changelog
* Mon Apr 23 2018 Hans de Goede <hdegoede@redhat.com> - 11.1-20
- Fix Intel LPE HDMI problems:
- Update to upstream gitsnapshot which contains a fix for the crash caused
by patch93 (and contains patch93 fixing the Intel LPE HDMI pa crash)
- Fix-realtime-scheduling-on-byt-cht.patch, Fix-Intel-HDMI-LPE-problems.patch:
drop both, both fixes are included in the git snapshot
* Fri Mar 23 2018 Iryna Shcherbina <ishcherb@redhat.com> - 11.1-19
- Update Python 2 dependency declarations to new packaging standards
(See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3)

4
sources
View File

@ -1,3 +1 @@
SHA512 (pulseaudio-11.1.tar.xz) = 8863d8d7aede0d9a4d158e84e7bece91747c335f9ac98c7b21fafe76b762f8817e1125307aa46e561e540d2c40525e91f51a55ec34ac55d58fd5980199856a7a
SHA512 (pulseaudio-11.1.tar.xz.md5) = d4fcd1476eb0b0856feb311584cf9623fcb87a1495c335696cf9371871d23e1076d33c138413e2a76f34711fd57fe6d277ed7e6a5d069baa9c6afc5e991d2675
SHA512 (pulseaudio-11.1.tar.xz.sha1) = c8d5c3923ff67e795d4c0f56f561b1637244eca1b91540f49052a9bc6c2c617eb0f05a7ceb1055852f1dfbbe41706ef1baf81f68c7556c0241373168f7030d56
SHA512 (pulseaudio-11.1-129-gba2b7.tar.xz) = 2395e30fd939ce45a95c6466c44deb2c0e76b309640b70f094d6ada63c650386f6c43d655bf4f3b2704b6ce6faa3567a9900f07beb3588f408de28ad29e961bf

13
v5-1-4-bluetooth-use-consistent-profile-names.patch
View File

@ -119,13 +119,14 @@ diff --git a/src/modules/bluetooth/bluez5-util.c b/src/modules/bluetooth/bluez5-
index c9283232..4470f2ef 100644
--- a/src/modules/bluetooth/bluez5-util.c
+++ b/src/modules/bluetooth/bluez5-util.c
@@ -174,10 +174,10 @@ static bool device_supports_profile(pa_bluetooth_device *device, pa_bluetooth_pr
@@ -174,11 +174,11 @@ static bool device_supports_profile(pa_bluetooth_device *device, pa_bluetooth_pr
return !!pa_hashmap_get(device->uuids, PA_BLUETOOTH_UUID_A2DP_SINK);
case PA_BLUETOOTH_PROFILE_A2DP_SOURCE:
return !!pa_hashmap_get(device->uuids, PA_BLUETOOTH_UUID_A2DP_SOURCE);
- case PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT:
+ case PA_BLUETOOTH_PROFILE_HSP_HS:
return !!pa_hashmap_get(device->uuids, PA_BLUETOOTH_UUID_HSP_HS)
|| !!pa_hashmap_get(device->uuids, PA_BLUETOOTH_UUID_HSP_HS_ALT)
|| !!pa_hashmap_get(device->uuids, PA_BLUETOOTH_UUID_HFP_HF);
- case PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY:
+ case PA_BLUETOOTH_PROFILE_HFP_AG:
@ -235,8 +236,8 @@ index 530207a2..d076fbad 100644
* EAGAIN means we are waiting for a NewConnection signal */
if (u->stream_fd == -EAGAIN)
@@ -1039,7 +1039,7 @@ static int add_source(struct userdata *u) {
u->source->userdata = u;
u->source->parent.process_msg = source_process_msg;
u->source->set_state_in_io_thread = source_set_state_in_io_thread_cb;
- if (u->profile == PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT || u->profile == PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY) {
+ if (u->profile == PA_BLUETOOTH_PROFILE_HSP_HS || u->profile == PA_BLUETOOTH_PROFILE_HFP_AG) {
@ -274,8 +275,8 @@ index 530207a2..d076fbad 100644
* EAGAIN means we are waiting for a NewConnection signal */
if (u->stream_fd == -EAGAIN)
@@ -1210,7 +1210,7 @@ static int add_sink(struct userdata *u) {
u->sink->userdata = u;
u->sink->parent.process_msg = sink_process_msg;
u->sink->set_state_in_io_thread = sink_set_state_in_io_thread_cb;
- if (u->profile == PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT || u->profile == PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY) {
+ if (u->profile == PA_BLUETOOTH_PROFILE_HSP_HS || u->profile == PA_BLUETOOTH_PROFILE_HFP_AG) {
@ -336,7 +337,7 @@ index 530207a2..d076fbad 100644
- case PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT:
+ case PA_BLUETOOTH_PROFILE_HSP_HS:
cp = pa_card_profile_new(name, _("Headset Head Unit (HSP/HFP)"), sizeof(pa_bluetooth_profile_t));
cp->priority = 20;
cp->priority = 30;
cp->n_sinks = 1;
@@ -1886,7 +1886,7 @@ static pa_card_profile *create_card_profile(struct userdata *u, pa_bluetooth_pro
p = PA_CARD_PROFILE_DATA(cp);
@ -345,12 +346,12 @@ index 530207a2..d076fbad 100644
- case PA_BLUETOOTH_PROFILE_HEADSET_AUDIO_GATEWAY:
+ case PA_BLUETOOTH_PROFILE_HFP_AG:
cp = pa_card_profile_new(name, _("Headset Audio Gateway (HSP/HFP)"), sizeof(pa_bluetooth_profile_t));
cp->priority = 20;
cp->priority = 10;
cp->n_sinks = 1;
@@ -1961,9 +1961,9 @@ static int uuid_to_profile(const char *uuid, pa_bluetooth_profile_t *_r) {
else if (pa_streq(uuid, PA_BLUETOOTH_UUID_A2DP_SOURCE))
*_r = PA_BLUETOOTH_PROFILE_A2DP_SOURCE;
else if (pa_streq(uuid, PA_BLUETOOTH_UUID_HSP_HS) || pa_streq(uuid, PA_BLUETOOTH_UUID_HFP_HF))
else if (pa_bluetooth_uuid_is_hsp_hs(uuid) || pa_streq(uuid, PA_BLUETOOTH_UUID_HFP_HF))
- *_r = PA_BLUETOOTH_PROFILE_HEADSET_HEAD_UNIT;
+ *_r = PA_BLUETOOTH_PROFILE_HSP_HS;
else if (pa_streq(uuid, PA_BLUETOOTH_UUID_HSP_AG) || pa_streq(uuid, PA_BLUETOOTH_UUID_HFP_AG))

21
v5-2-4-bluetooth-separate-HSP-and-HFP.patch
View File

@ -80,7 +80,7 @@ index 4470f2ef..80a025d5 100644
};
static pa_dbus_pending* send_and_add_to_pending(pa_bluetooth_discovery *y, DBusMessage *m,
@@ -169,14 +170,27 @@ static const char *transport_state_to_string(pa_bluetooth_transport_state_t stat
@@ -169,15 +170,29 @@ static const char *transport_state_to_string(pa_bluetooth_transport_state_t stat
}
static bool device_supports_profile(pa_bluetooth_device *device, pa_bluetooth_profile_t profile) {
@ -103,8 +103,11 @@ index 4470f2ef..80a025d5 100644
return !!pa_hashmap_get(device->uuids, PA_BLUETOOTH_UUID_A2DP_SOURCE);
case PA_BLUETOOTH_PROFILE_HSP_HS:
- return !!pa_hashmap_get(device->uuids, PA_BLUETOOTH_UUID_HSP_HS)
- || !!pa_hashmap_get(device->uuids, PA_BLUETOOTH_UUID_HSP_HS_ALT)
- || !!pa_hashmap_get(device->uuids, PA_BLUETOOTH_UUID_HFP_HF);
+ return show_hsp && !!pa_hashmap_get(device->uuids, PA_BLUETOOTH_UUID_HSP_HS);
+ return show_hsp && (
+ !!pa_hashmap_get(device->uuids, PA_BLUETOOTH_UUID_HSP_HS)
+ || !!pa_hashmap_get(device->uuids, PA_BLUETOOTH_UUID_HSP_HS_ALT));
+ case PA_BLUETOOTH_PROFILE_HFP_HF:
+ return show_hfp && !!pa_hashmap_get(device->uuids, PA_BLUETOOTH_UUID_HFP_HF);
case PA_BLUETOOTH_PROFILE_HFP_AG:
@ -238,8 +241,8 @@ index d076fbad..d37ce9ce 100644
* EAGAIN means we are waiting for a NewConnection signal */
if (u->stream_fd == -EAGAIN)
@@ -1039,7 +1045,9 @@ static int add_source(struct userdata *u) {
u->source->userdata = u;
u->source->parent.process_msg = source_process_msg;
u->source->set_state_in_io_thread = source_set_state_in_io_thread_cb;
- if (u->profile == PA_BLUETOOTH_PROFILE_HSP_HS || u->profile == PA_BLUETOOTH_PROFILE_HFP_AG) {
+ if (u->profile == PA_BLUETOOTH_PROFILE_HSP_HS
@ -267,8 +270,8 @@ index d076fbad..d37ce9ce 100644
* EAGAIN means we are waiting for a NewConnection signal */
if (u->stream_fd == -EAGAIN)
@@ -1210,7 +1220,9 @@ static int add_sink(struct userdata *u) {
u->sink->userdata = u;
u->sink->parent.process_msg = sink_process_msg;
u->sink->set_state_in_io_thread = sink_set_state_in_io_thread_cb;
- if (u->profile == PA_BLUETOOTH_PROFILE_HSP_HS || u->profile == PA_BLUETOOTH_PROFILE_HFP_AG) {
+ if (u->profile == PA_BLUETOOTH_PROFILE_HSP_HS
@ -302,7 +305,7 @@ index d076fbad..d37ce9ce 100644
case PA_BLUETOOTH_PROFILE_HSP_HS:
- cp = pa_card_profile_new(name, _("Headset Head Unit (HSP/HFP)"), sizeof(pa_bluetooth_profile_t));
+ cp = pa_card_profile_new(name, _("Headset Head Unit (HSP)"), sizeof(pa_bluetooth_profile_t));
+ cp->priority = 20;
+ cp->priority = 30;
+ cp->n_sinks = 1;
+ cp->n_sources = 1;
+ cp->max_sink_channels = 1;
@ -314,16 +317,16 @@ index d076fbad..d37ce9ce 100644
+ break;
+
+ case PA_BLUETOOTH_PROFILE_HFP_HF:
+ cp = pa_card_profile_new(name, _("Headset Handsfree (HFP)"), sizeof(pa_bluetooth_profile_t));
cp->priority = 20;
+ cp = pa_card_profile_new(name, _("Headset Handsfree (HFP)"), sizeof(pa_bluetooth_profile_t));
cp->priority = 30;
cp->n_sinks = 1;
cp->n_sources = 1;
@@ -1960,8 +1988,10 @@ static int uuid_to_profile(const char *uuid, pa_bluetooth_profile_t *_r) {
*_r = PA_BLUETOOTH_PROFILE_A2DP_SINK;
else if (pa_streq(uuid, PA_BLUETOOTH_UUID_A2DP_SOURCE))
*_r = PA_BLUETOOTH_PROFILE_A2DP_SOURCE;
- else if (pa_streq(uuid, PA_BLUETOOTH_UUID_HSP_HS) || pa_streq(uuid, PA_BLUETOOTH_UUID_HFP_HF))
+ else if (pa_streq(uuid, PA_BLUETOOTH_UUID_HSP_HS))
- else if (pa_bluetooth_uuid_is_hsp_hs(uuid) || pa_streq(uuid, PA_BLUETOOTH_UUID_HFP_HF))
+ else if (pa_bluetooth_uuid_is_hsp_hs(uuid))
*_r = PA_BLUETOOTH_PROFILE_HSP_HS;
+ else if (pa_streq(uuid, PA_BLUETOOTH_UUID_HFP_HF))
+ *_r = PA_BLUETOOTH_PROFILE_HFP_HF;