ppp/SOURCES/0004-doc-add-configuration-samples.patch

From d7faeb88f684c8b2ae193b2c5b5b358ac757fcfa Mon Sep 17 00:00:00 2001
From: Michal Sekletar <msekleta@redhat.com>
Date: Fri, 4 Apr 2014 11:39:09 +0200
Subject: [PATCH 04/27] doc: add configuration samples

---
 sample/auth-down     |  17 ++++++
 sample/auth-up       |  17 ++++++
 sample/ip-down       |  22 ++++++++
 sample/ip-up         |  23 ++++++++
 sample/options       | 153 +++++++++++++++++++++++++++++++++++++++++++++++++++
 sample/options.ttyXX |  14 +++++
 sample/pap-secrets   |  28 ++++++++++
 7 files changed, 274 insertions(+)
 create mode 100644 sample/auth-down
 create mode 100644 sample/auth-up
 create mode 100644 sample/ip-down
 create mode 100644 sample/ip-up
 create mode 100644 sample/options
 create mode 100644 sample/options.ttyXX
 create mode 100644 sample/pap-secrets

diff --git a/sample/auth-down b/sample/auth-down
new file mode 100644
index 0000000..edde65d
--- /dev/null
+++ b/sample/auth-down
@@ -0,0 +1,17 @@
+#!/bin/sh
+#
+# A program or script which is executed after the remote system
+# successfully authenticates itself. It is executed with the parameters
+# <interface-name> <peer-name> <user-name> <tty-device> <speed>
+#
+
+#
+# The environment is cleared before executing this script
+# so the path must be reset
+#
+PATH=/usr/sbin:/sbin:/usr/bin:/bin
+export PATH
+
+echo auth-down `date +'%y/%m/%d %T'` $* >> /var/log/pppstats
+
+# last line
diff --git a/sample/auth-up b/sample/auth-up
new file mode 100644
index 0000000..54722a3
--- /dev/null
+++ b/sample/auth-up
@@ -0,0 +1,17 @@
+#!/bin/sh
+#
+# A program or script which is executed after the remote system
+# successfully authenticates itself. It is executed with the parameters
+# <interface-name> <peer-name> <user-name> <tty-device> <speed>
+#
+
+#
+# The environment is cleared before executing this script
+# so the path must be reset
+#
+PATH=/usr/sbin:/sbin:/usr/bin:/bin
+export PATH
+
+echo auth-up `date +'%y/%m/%d %T'` $* >> /var/log/pppstats
+
+# last line
diff --git a/sample/ip-down b/sample/ip-down
new file mode 100644
index 0000000..b771fb6
--- /dev/null
+++ b/sample/ip-down
@@ -0,0 +1,22 @@
+#!/bin/sh
+#
+# This script is run by the pppd _after_ the link is brought down.
+# It should be used to delete routes, unset IP addresses etc.
+#
+# This script is called with the following arguments:
+#    Arg  Name               Example
+#    $1   Interface name     ppp0
+#    $2   The tty            ttyS1
+#    $3   The link speed     38400
+#    $4   Local IP number    12.34.56.78
+#    $5   Peer  IP number    12.34.56.99
+#
+
+#
+# The  environment is cleared before executing this script
+# so the path must be reset
+#
+PATH=/usr/sbin:/sbin:/usr/bin:/bin
+export PATH
+
+# last line
diff --git a/sample/ip-up b/sample/ip-up
new file mode 100644
index 0000000..7ce7c8d
--- /dev/null
+++ b/sample/ip-up
@@ -0,0 +1,23 @@
+#!/bin/sh
+#
+# This script is run by the pppd after the link is established.
+# It should be used to add routes, set IP address, run the mailq
+# etc.
+#
+# This script is called with the following arguments:
+#    Arg  Name               Example
+#    $1   Interface name     ppp0
+#    $2   The tty            ttyS1
+#    $3   The link speed     38400
+#    $4   Local IP number    12.34.56.78
+#    $5   Peer  IP number    12.34.56.99
+#
+
+#
+# The  environment is cleared before executing this script
+# so the path must be reset
+#
+PATH=/usr/sbin:/sbin:/usr/bin:/bin
+export PATH
+
+# last line
diff --git a/sample/options b/sample/options
new file mode 100644
index 0000000..8d0a3f9
--- /dev/null
+++ b/sample/options
@@ -0,0 +1,153 @@
+# /etc/ppp/options
+
+# The name of this server. Often, the FQDN is used here.
+#name <host>
+
+# Enforce the use of the hostname as the name of the local system for
+# authentication purposes (overrides the name option).
+usehostname
+
+# If no local IP address is given, pppd will use the first IP address
+# that belongs to the local hostname. If "noipdefault" is given, this
+# is disabled and the peer will have to supply an IP address.
+noipdefault
+
+# With this option, pppd will accept the peer's idea of our local IP
+# address, even if the local IP address was specified in an option.
+#ipcp-accept-local
+
+# With this option, pppd will accept the peer's idea of its (remote) IP
+# address, even if the remote IP address was specified in an option.
+#ipcp-accept-remote
+
+# Specify which DNS Servers the incoming Win95 or WinNT Connection should use
+# Two Servers can be remotely configured
+#ms-dns 192.168.1.1
+#ms-dns 192.168.1.2
+
+# Specify which WINS Servers the incoming connection Win95 or WinNT should use
+#wins-addr 192.168.1.50
+#wins-addr 192.168.1.51
+
+# enable this on a server that already has a permanent default route
+#nodefaultroute
+
+# Run the executable or shell command specified after pppd has terminated
+# the link.  This script could, for example, issue commands to the modem
+# to cause it to hang up if hardware modem control signals were not
+# available.
+# If mgetty is running, it will reset the modem anyway. So there is no need
+# to do it here.
+#disconnect "chat -- \d+++\d\c OK ath0 OK"
+
+# Increase debugging level (same as -d). The debug output is written
+# to syslog LOG_LOCAL2.
+debug
+
+# Enable debugging code in the kernel-level PPP driver.  The argument n
+# is a number which is the sum of the following values: 1 to enable
+# general debug messages, 2 to request that the contents of received
+# packets be printed, and 4 to request that the contents of transmitted
+# packets be printed.
+#kdebug n
+
+# Require the peer to authenticate itself before allowing network
+# packets to be sent or received.
+# Please do not disable this setting. It is expected to be standard in
+# future releases of pppd. Use the call option (see manpage) to disable
+# authentication for specific peers.
+#auth
+
+# authentication can either be pap or chap. As most people only want to
+# use pap, you can also disable chap:
+#require-pap
+#refuse-chap
+
+# Use hardware flow control (i.e. RTS/CTS) to control the flow of data
+# on the serial port.
+crtscts
+
+# Specifies that pppd should use a UUCP-style lock on the serial device
+# to ensure exclusive access to the device.
+lock
+
+# Use the modem control lines.
+modem
+
+# async character map -- 32-bit hex; each bit is a character
+# that needs to be escaped for pppd to receive it.  0x00000001
+# represents '\x01', and 0x80000000 represents '\x1f'.
+# To allow pppd to work over a rlogin/telnet connection, ou should escape
+# XON (^Q), XOFF  (^S) and ^]: (The peer should use "escape ff".)
+#asyncmap  200a0000
+asyncmap 0
+
+# Specifies that certain characters should be escaped on transmission
+# (regardless of whether the peer requests them to be escaped with its
+# async control character map).  The characters to be escaped are
+# specified as a list of hex numbers separated by commas.  Note that
+# almost any character can be specified for the escape option, unlike
+# the asyncmap option which only allows control characters to be
+# specified.  The characters which may not be escaped are those with hex
+# values 0x20 - 0x3f or 0x5e.
+#escape 11,13,ff
+
+# Set the MRU [Maximum Receive Unit] value to <n> for negotiation.  pppd
+# will ask the peer to send packets of no more than <n> bytes. The
+# minimum MRU value is 128.  The default MRU value is 1500.  A value of
+# 296 is recommended for slow links (40 bytes for TCP/IP header + 256
+# bytes of data).
+#mru 542
+
+# Set the MTU [Maximum Transmit Unit] value to <n>. Unless the peer
+# requests a smaller value via MRU negotiation, pppd will request that
+# the kernel networking code send data packets of no more than n bytes
+# through the PPP network interface.
+#mtu <n>
+
+# Set the interface netmask to <n>, a 32 bit netmask in "decimal dot"
+# notation (e.g. 255.255.255.0).
+#netmask 255.255.255.0
+
+# Don't fork to become a background process (otherwise pppd will do so
+# if a serial device is specified).
+nodetach
+
+# Set the assumed name of the remote system for authentication purposes
+# to <n>.
+#remotename <n>
+
+# Add an entry to this system's ARP [Address Resolution Protocol]
+# table with the IP address of the peer and the Ethernet address of this
+# system. {proxyarp,noproxyarp}
+proxyarp
+
+# Use the system password database for authenticating the peer using
+# PAP. Note: mgetty already provides this option. If this is specified
+# then dialin from users using a script under Linux to fire up ppp wont work.
+#login
+
+# If this option is given, pppd will send an LCP echo-request frame to
+# the peer every n seconds. Under Linux, the echo-request is sent when
+# no packets have been received from the peer for n seconds. Normally
+# the peer should respond to the echo-request by sending an echo-reply.
+# This option can be used with the lcp-echo-failure option to detect
+# that the peer is no longer connected.
+lcp-echo-interval 30
+
+# If this option is given, pppd will presume the peer to be dead if n
+# LCP echo-requests are sent without receiving a valid LCP echo-reply.
+# If this happens, pppd will terminate the connection.  Use of this
+# option requires a non-zero value for the lcp-echo-interval parameter.
+# This option can be used to enable pppd to terminate after the physical
+# connection has been broken (e.g., the modem has hung up) in
+# situations where no hardware modem control lines are available.
+lcp-echo-failure 4
+
+# Specifies that pppd should disconnect if the link is idle for n seconds.
+idle 600
+
+# Disable the IPXCP and IPX protocols.
+noipx
+
+# ---<End of File>---
diff --git a/sample/options.ttyXX b/sample/options.ttyXX
new file mode 100644
index 0000000..d4202f5
--- /dev/null
+++ b/sample/options.ttyXX
@@ -0,0 +1,14 @@
+# If you need to set up multiple serial lines then copy this file to
+# options.<ttyname> for each tty with a modem on it.
+#
+# The options.tty file will assign an IP address to each PPP connection
+# as it comes up. They must all be distinct!
+#
+# Example:
+# options.ttyS1		for com2 under DOS.
+#
+# Edit the following line so that the first IP address
+# mentioned is the ip address of the serial port while the second
+# is the IP address of your host
+#
+hostname-s1:hostname
diff --git a/sample/pap-secrets b/sample/pap-secrets
new file mode 100644
index 0000000..098971b
--- /dev/null
+++ b/sample/pap-secrets
@@ -0,0 +1,28 @@
+# Secrets for authentication using PAP
+# client	server	secret			IP addresses
+
+# OUTBOUND CONNECTIONS
+# Here you should add your userid password to connect to your providers via
+# pap. The * means that the password is to be used for ANY host you connect
+# to. Thus you do not have to worry about the foreign machine name. Just
+# replace password with your password.
+# If you have different providers with different passwords then you better
+# remove the following line.
+#hostname	*	password
+
+# INBOUND CONNECTIONS
+#client		hostname	<password>	192.168.1.1
+
+# If you add "auth login -chap +pap" to /etc/mgetty+sendfax/login.config,
+# all users in /etc/passwd can use their password for pap-authentication.
+#
+# Every regular user can use PPP and has to use passwords from /etc/passwd
+#*	hostname	""
+# UserIDs that cannot use PPP at all. Check your /etc/passwd and add any
+# other accounts that should not be able to use pppd! Replace hostname
+# with your local hostname.
+#guest		hostname	"*"	-
+#master		hostname	"*"	-
+#root		hostname	"*"	-
+#support	hostname	"*"	-
+#stats		hostname	"*"	-
-- 
1.8.3.1