.ppc64-diag.metadata

@@ -0,0 +1 @@
+f98832e286b997679c6d3818c00b33410851140d SOURCES/ppc64-diag-2.7.9.tar.gz

SOURCES/ppc64-diag-2.7.9-call_home-fail-on-nvmf-device

@@ -1,71 +0,0 @@
-commit db0c6d7974d7f8909878384d77ec02457759d6df
-Author: Nilay Shroff <nilay@linux.ibm.com>
-Date:   Tue Jan 16 13:55:03 2024 +0530
-
-    diags/diag_nvme: call_home command fails on nvmf drive
-    
-    The diag_nvme command needs to retrieve the VPD log page from NVMe for
-    filling in the product data while generating the call-home event.
-    However, call-home feature is supported for directly attached NVMe
-    module. In the current diag_nvme implementation, if user doesn't
-    provide NVMe device name for diagnostics then it(diag_nvme)  loops
-    through each NVMe moudle (directly connected to the system/LPAR as
-    well as discovered over fabrics) and attempt retrieving the SMART log
-    page as well as VPD page.  Unfortunately, diag_nvme fails to retrieve
-    the VPD page for NVMe connected over fabrics and that causes the
-    diag_nvme to print "not-so-nice" failure messages on console.
-    
-    Henec fixed the diag_nvme code so that for call-home event reporting,
-    it skips the NVMe which is connected over fabrics and prints a
-    "nice-message" informing the user that it's skipping diagnosting for
-    NVMe module connected over fabrics.  In a nutshell, with this fix now
-    diag_nvme would only diagnose the NVMe module which is directtly
-    attached (over PCIe) to the system.
-    
-    Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
-
-diff --git a/diags/diag_nvme.c b/diags/diag_nvme.c
-index c1c0a20..e86786c 100644
---- a/diags/diag_nvme.c
-+++ b/diags/diag_nvme.c
-@@ -375,9 +375,40 @@ static int diagnose_nvme(char *device_name, struct notify *notify, char *file_pa
- 	char endurance_s[sizeof(vpd.endurance) + 1], capacity_s[sizeof(vpd.capacity)+1];
-         uint64_t event_id;
- 	uint8_t severity;
-+	FILE *fp;
-+	char tr_file_path[PATH_MAX];
- 	uint32_t raw_data_len = 0;
- 	unsigned char *raw_data = NULL;
- 
-+	/*
-+	 * Skip diag test if NVMe is connected over fabric
-+	 */
-+	snprintf(tr_file_path, sizeof(tr_file_path),
-+			NVME_SYS_PATH"/%s/%s", device_name, "transport");
-+	fp = fopen(tr_file_path, "r");
-+	if (fp) {
-+		char buf[12];
-+		int n = fread(buf, 1, sizeof(buf), fp);
-+
-+		if (n) {
-+			/*
-+			 * If NVMe transport is anything but pcie then skip the diag test
-+			 */
-+			if (strncmp(buf, "pcie", 4) != 0) {
-+				fprintf(stdout, "Skipping diagnostics for nvmf : %s\n",
-+						device_name);
-+				fclose(fp);
-+				return 0;
-+			}
-+		}
-+		fclose(fp);
-+	} else {
-+		fprintf(stderr, "Skipping diagnostics for %s:\n"
-+				"Unable to find the nvme transport type\n",
-+				device_name);
-+		return -1;
-+	}
-+
- 	tmp_rc = regex_controller(controller_name, device_name);
- 	if (tmp_rc != 0)
- 		return -1;

SPECS/ppc64-diag.spec

@@ -1,15 +1,10 @@
-# BZ#860040:
-%global __requires_exclude %{?__requires_exclude:%__requires_exclude|}\/usr\/libexec\/ppc64-diag\/servevent_parse.pl
-
 Name:           ppc64-diag
 Version:        2.7.9
 Release:        3%{?dist}
 Summary:        PowerLinux Platform Diagnostics
-URL:            https://github.com/power-ras/ppc64-diag
-Group:          System Environment/Base
+URL:            https://github.com/power-ras/%{name}
 License:        GPLv2
 ExclusiveArch:  ppc %{power64}
-
 BuildRequires:  make
 BuildRequires:  gcc-c++
 BuildRequires:  libservicelog-devel
@@ -42,12 +37,9 @@ Patch0:         ppc64-diag-2.7.9-fedora.patch
 # upstream fixes
 # rtas_errd: Handle multiple platform dumps
 Patch10:         ppc64-diag-2.7.9-handle_multiple_platform_dumps.patch
-# ppc64-diag/lp_diag: Enable light path diagnostics for RTAS events
 Patch11:         ppc64-diag-2.7.9-moving-trim_trail_space-function.patch
 Patch12:         ppc64-diag-2.7.9-utilize-trim_trail_space-in-event_fru_callout.patch
 Patch13:         ppc64-diag-2.7.9-enable-light-path-diagnostics-for-RTAS-events.patch
-# call_home command "diag_nvme" fails on nvmf drive(nvmf/lpfc/Power10)
-Patch14:         ppc64-diag-2.7.9-call_home-fail-on-nvmf-device
 
 %description
 This package contains various diagnostic tools for PowerLinux.
@@ -61,7 +53,8 @@ administrators or connected service frameworks.
 
 %package        rtas
 Summary:        rtas_errd daemon
-Requires: powerpc-utils-core >= 1.3.6-6
+# PCI hotplug support on PowerKVM guest depends on below powerpc-utils version.
+Requires:       powerpc-utils-core >= 1.3.7-5
 
 %description rtas
 This package contains only rtas_errd daemon.
@@ -71,8 +64,8 @@ This package contains only rtas_errd daemon.
 
 %build
 ./autogen.sh
-%configure
-LDFLAGS="%{build_ldflags}" CFLAGS="%{build_cflags}" CXXFLAGS="%{build_cflags}" make %{?_smp_mflags} V=1
+CXXFLAGS="-std=gnu++14 %{build_cflags}" %configure
+LDFLAGS="%{build_ldflags}" CFLAGS="%{build_cflags}" CXXFLAGS="-std=gnu++14 %{build_cflags}" make %{?_smp_mflags} V=1
 
 %install
 make install DESTDIR=$RPM_BUILD_ROOT
@@ -83,7 +76,6 @@ mkdir -p $RPM_BUILD_ROOT/%{_unitdir}
 mkdir -p $RPM_BUILD_ROOT/%{_sysconfdir}/%{name}/ses_pages
 mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/log/dump
 mkdir -p $RPM_BUILD_ROOT/%{_localstatedir}/log/opal-elog
- 
 ln -sfv %{_sbindir}/usysattn $RPM_BUILD_ROOT/%{_sbindir}/usysfault
 install -m 644 %{SOURCE1} %{SOURCE2} %{SOURCE3} %{SOURCE4} %{SOURCE5} $RPM_BUILD_ROOT/%{_mandir}/man8/
 
@@ -142,18 +134,18 @@ install -m 644 %{SOURCE1} %{SOURCE2} %{SOURCE3} %{SOURCE4} %{SOURCE5} $RPM_BUILD
 %{_libexecdir}/%{name}/lp_diag_setup --register >/dev/null 2>&1
 %{_libexecdir}/%{name}/ppc64_diag_setup --register >/dev/null 2>&1
 if [ "$1" = "1" ]; then # first install
-    systemctl -q enable opal_errd.service >/dev/null 2>&1
-    systemctl start opal_errd.service >/dev/null 2>&1
+    systemctl -q enable opal_errd.service >/dev/null
+    systemctl start opal_errd.service >/dev/null
 elif [ "$1" = "2" ]; then # upgrade
-    systemctl restart opal_errd.service >/dev/null 2>&1
+    systemctl restart opal_errd.service >/dev/null
     systemctl daemon-reload > /dev/null 2>&1
 fi
 
 %preun
 # Pre-uninstall script -------------------------------------------------
 if [ "$1" = "0" ]; then # last uninstall
-    systemctl stop opal_errd.service >/dev/null 2>&1
-    systemctl -q disable opal_errd.service >/dev/null 2>&1
+    systemctl stop opal_errd.service >/dev/null
+    systemctl -q disable opal_errd.service
     %{_libexecdir}/%{name}/ppc64_diag_setup --unregister >/dev/null
     %{_libexecdir}/%{name}/lp_diag_setup --unregister >/dev/null
     systemctl daemon-reload > /dev/null 2>&1
@@ -162,10 +154,11 @@ fi
 %triggerin -- librtas
 # trigger on librtas upgrades ------------------------------------------
 if [ "$2" = "2" ]; then
-    systemctl restart opal_errd.service >/dev/null 2>&1
-    systemctl restart rtas_errd.service >/dev/null 2>&1
+    systemctl restart opal_errd.service >/dev/null
+    systemctl restart rtas_errd.service >/dev/null
 fi
 
+ 
 %post rtas
 if [ "$1" = "1" ]; then # first install
     systemctl -q enable rtas_errd.service >/dev/null
@@ -183,48 +176,71 @@ if [ "$1" = "0" ]; then # last uninstall
 fi
 
 %changelog
-* Wed Jan 31 2024 Than Ngo <than@redhat.com> - 2.7.9-3
-- call_home command "diag_nvme" fails on nvmf drive
-  Resolves: RHEL-23437
-
-* Sun Dec 10 2023 Than Ngo <than@redhat.com> - 2.7.9-2
+* Sun Dec 10 2023 Than Ngo <than@redhat.com> - 2.7.9-3
 - Enable light path diagnostics for RTAS events
-- Handle multiple platform dumps
-  Resolves: RHEL-11454
+  Resolves: RHEL-11478 
 
-* Wed Oct 19 2022 Than Ngo <than@redhat.com> - 2.7.9-1
-- Resolves: #2114591, rebase to 2.7.9
+* Thu Jul 20 2023 Than Ngo <than@redhat.com> - 2.7.9-2
+- Resolves: #2177948, handle multiple platform dumps
 
-* Fri May 13 2022 Than Ngo <than@redhat.com> - 2.7.8-1
-- Resolves: #2051313, rebase to 2.7.8
+* Tue Oct 18 2022 Than Ngo <than@redhat.com> - 2.7.9-1
+- Resolves: #2110128, add NVMe Call Home support
+
+* Fri May 06 2022 Than Ngo <than@redhat.com> - 2.7.8-1
+- Resolves: #2051286, rebase to 2.7.8
+
+* Tue Aug 10 2021 Mohan Boddu <mboddu@redhat.com> - 2.7.7-2
+- Rebuilt for IMA sigs, glibc 2.34, aarch64 flags
+  Related: rhbz#1991688
 
 * Mon May 17 2021 Than Ngo <than@redhat.com> - 2.7.7-1
-- Resolves: #1779206, rebase to 2.7.7
+- Resolves: #1869567, rebase to 2.7.7
 
-* Thu Mar 26 2020 Than Ngo <than@redhat.com> - 2.7.6-2
-- Resolves: #1814335, create rtas subpackage to avoid the perl dependency
+* Fri Apr 16 2021 Mohan Boddu <mboddu@redhat.com> - 2.7.6-10
+- Rebuilt for RHEL 9 BETA on Apr 15th 2021. Related: rhbz#1947937
 
-* Thu Nov 07 2019 Than Ngo <than@redhat.com> - 2.7.6-1
-- Resolves: #1725200, rebase to 2.7.6
+* Wed Jan 27 2021 Fedora Release Engineering <releng@fedoraproject.org> - 2.7.6-9
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
 
-* Wed Jun 19 2019 Than Ngo <than@redhat.com> - 2.7.5-2
-- Resolves: #1721497, added /var/log/ppc64-diag and systemctl daemon-reload
+* Tue Oct 27 2020 Jeff Law <law@redhat.com> - 2.7.6-8
+- Force C++14 for configure step too
 
-* Tue Apr 30 2019 Than Ngo <than@redhat.com> - 2.7.5-1
-- Resolves: #1664093, update to latest upstream 2.7.5
+* Tue Oct 27 2020 Jeff Law <law@redhat.com> - 2.7.6-7
+- Force C++14 mode as this code is not C++17 ready
 
-* Mon Dec 10 2018 Than Ngo <than@redhat.com> - 2.7.4-4
-- install missing man pages
+* Tue Jul 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 2.7.6-6
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
 
-* Mon Dec 10 2018 Than Ngo <than@redhat.com> - 2.7.4-3
-- create diag_disk path part of installation
-- diags: Increase buffer length size to read complete system vpd information
-- diags: Remove timestamp from disk health log file
-- diags: Create diag_disk log directory manually if not present
-  Resolves: #1657757
+* Mon Mar 30 2020 Than Ngo <than@redhat.com> - 2.7.6-5
+- add requirement on powerpc-utils in main package
+
+* Sat Mar 28 2020 Than Ngo <than@redhat.com> - 2.7.6-4
+- create rtas subpackage to avoid the perl dependency
+
+* Thu Jan 30 2020 Fedora Release Engineering <releng@fedoraproject.org> - 2.7.6-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
+
+* Mon Dec 02 2019 Than Ngo <than@redhat.com> - 2.7.6-2
+- Update Url and Source
+
+* Wed Nov 27 2019 Than Ngo <than@redhat.com> - 2.7.6-1
+- rebase to 2.7.6
+- update Url
+
+* Fri Jul 26 2019 Fedora Release Engineering <releng@fedoraproject.org> - 2.7.5-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
+
+* Thu Apr 25 2019 Vasant Hegde <hegdevasant@linux.vnet.ibm.com> - 2.7.5-1
+- Update to latest upstream 2.7.5
+
+* Sat Feb 02 2019 Fedora Release Engineering <releng@fedoraproject.org> - 2.7.4-4
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
+
+* Fri Jul 13 2018 Fedora Release Engineering <releng@fedoraproject.org> - 2.7.4-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
 
 * Thu May 10 2018 Dan Horák <dan[at]danny.cz> - 2.7.4-2
-- fix conditition for rtas_errd service (#1575638)
+- fix condition for rtas_errd service (#1575638)
 
 * Fri Mar 09 2018 Than Ngo <than@redhat.com> - 2.7.4-1
 - update to latest upstream 2.7.4