.gitignore

@@ -1 +1 @@
-SOURCES/powerpc-utils-1.3.8.tar.gz
+SOURCES/powerpc-utils-1.3.10.tar.gz

.powerpc-utils.metadata

@@ -1 +0,0 @@
-526496eb7a3712d0d5a9ba0b4748b957625ede0e SOURCES/powerpc-utils-1.3.8.tar.gz

SOURCES/0001-ofpathname-Use-NVMe-controller-physical-nsid.patch

@@ -1,78 +0,0 @@
-From 21c860888425762468d339950518ab8b0940ecea Mon Sep 17 00:00:00 2001
-From: Tyrel Datwyler <tyreld@linux.ibm.com>
-Date: Mon, 5 Oct 2020 13:03:45 -0700
-Subject: [PATCH] ofpathname: Use NVMe controller physical nsid
-
-Linux creates logical block devices of the the form nvmeXnYpZ such that X = the
-controller, Y = namepsace, and Z = partition. For example:
-
-/dev/nvme0n1p1
-
-The Linux namespace numbering scheme for namespaces always starts at 1 and
-increases monotonically regardless of the actual numbering scheme of the
-namespaces as seen by the  physical NVMe controller. Accordingly, the Open
-firmware path binding utilizes the namespace id as seen by the controller and
-not the necessarily the one given in the logical block device name.
-
-As such we need to use the "nsid" attribute in the sysfs entry for the logical
-device to properly map back and forth from OP pathnames.
-
-Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
----
- scripts/ofpathname | 24 ++++++++++++++++--------
- 1 file changed, 16 insertions(+), 8 deletions(-)
-
-diff --git a/scripts/ofpathname b/scripts/ofpathname
-index 2ceae25..41b8c5c 100755
---- a/scripts/ofpathname
-+++ b/scripts/ofpathname
-@@ -659,6 +659,11 @@ l2of_nvme()
-         devspec=`$CAT $PWD/device/devspec | tr -d '\000'`
-         if [[ -n $devspec ]]; then
-             found=1
-+            if [[ -n $devnsid ]]; then
-+                # Linux logical nsid might not match nvme controller nsid
-+                goto_dir $dir "nsid"
-+                devnsid=`$CAT $PWD/nsid | tr -d '\000'`
-+            fi
-             break
-         fi
-     done
-@@ -1609,16 +1614,9 @@ of2l_nvme()
-     local dir
-     local link
- 
--    for dir in `$FIND /sys/block -name "nvme*n$nsid"`; do
-+    for dir in `$FIND /sys/class/nvme -name "nvme[0-9]*"`; do
-         cd $dir
- 
--        link=`get_link "device"` # points to nvme[0-9]+ (non-namespace)
--        if [[ -n $link ]]; then
--            cd $link
--        else
--            continue
--        fi
--
-         link=`get_link "device"` # points to pci address dir
-         if [[ -n $link ]]; then
-             cd $link
-@@ -1635,6 +1633,16 @@ of2l_nvme()
-         fi
-     done
- 
-+    for dir in `$FIND /sys/block -name "${LOGICAL_DEVNAME}n[0-9]*"`; do
-+	    cd $dir
-+
-+	    local devnsid=`$CAT ./nsid 2>/dev/null`
-+	    if [[ $devnsid = $nsid ]]; then
-+		    LOGICAL_DEVNAME="${dir##*/}"
-+		    break
-+	    fi
-+    done
-+
-     if [[ -n $LOGICAL_DEVNAME ]] \
-     && [[ -n $part ]]; then
- 
--- 
-1.8.3.1
-

SOURCES/0002-sys_ident--skip-length-field-from-search.patch

@@ -1,13 +0,0 @@
-diff -up powerpc-utils-1.3.8/src/sys_ident.c.me powerpc-utils-1.3.8/src/sys_ident.c
---- powerpc-utils-1.3.8/src/sys_ident.c.me	2020-10-06 15:35:56.620350621 +0200
-+++ powerpc-utils-1.3.8/src/sys_ident.c	2020-10-06 15:36:31.468849936 +0200
-@@ -267,7 +267,8 @@ print_proc_sn_value(void)
- 						"parameter from RTAS\n");
- 				return 2;
- 			}
--			pos = strstr(buf, "uid=");
-+			/* Ignore length field (first 2 bytes) */
-+			pos = strstr(buf +2, "uid=");
- 			if (pos == NULL) {
- 				fprintf(stderr, "Parameter from RTAS does "
- 						"not contain uid\n");

SOURCES/nvsetenv

@@ -1,14 +0,0 @@
-#!/bin/sh
-
-if [ "$1" = "--version" ]; then
-   echo This version of nvsetenv is just a wrapper to invoke nvram
-   exit 0
-fi
-if [ -z "$1" ]; then
-   nvram --print-config
-elif [ -z "$2" ]; then
-   nvram --print-config="$1"
-else
-   nvram --update-config "$1"="$2"
-fi
-exit $?

SOURCES/nx-gzip.udev

@@ -0,0 +1 @@
+KERNEL=="nx-gzip", MODE="0666"

SOURCES/powerpc-utils-1.3.10-distro.patch

@@ -0,0 +1,11 @@
+diff -up powerpc-utils-1.3.10/Makefile.am.me powerpc-utils-1.3.10/Makefile.am
+--- powerpc-utils-1.3.10/Makefile.am.me	2022-06-03 12:35:01.335312481 +0200
++++ powerpc-utils-1.3.10/Makefile.am	2022-06-03 14:11:58.453820076 +0200
+@@ -229,7 +229,6 @@ install-data-hook:
+ 	$(INSTALL_DATA) systemd/smtstate.service $(DESTDIR)${systemd_unit_dir}/
+ 	$(INSTALL_DATA) systemd/hcn-init.service $(DESTDIR)${systemd_unit_dir}/
+ 	$(INSTALL_DATA) var/lib/powerpc-utils/smt.state $(DESTDIR)/var/lib/@PACKAGE@/
+-	$(INSTALL_SCRIPT) scripts/functions.suse $(DESTDIR)/usr/lib/@PACKAGE@/
+ 	$(INSTALL_SCRIPT) scripts/smtstate $(DESTDIR)@sbindir@
+ 	sed -i -e 's,$${exec_prefix},@prefix@,g' $(DESTDIR)${systemd_unit_dir}/smt_off.service
+ 	sed -i -e 's,$${exec_prefix},@prefix@,g' $(DESTDIR)${systemd_unit_dir}/smtstate.service

SOURCES/powerpc-utils-1.3.10-lparstat-Fix-negative-values-seen-while-running-lpar.patch

@@ -0,0 +1,84 @@
+commit 73ba26c1240a25e7699449e82cfc09dad10fed80
+Author: Sathvika Vasireddy <sv@linux.ibm.com>
+Date:   Fri Dec 9 15:26:46 2022 +0530
+
+    lparstat: Fix negative values seen while running lparstat with -E option
+    
+    Negative values are seen while running lparstat with -E option.
+    This is because delta_purr value is less than delta_idle_purr.
+    Given that these values are read from different sources, a
+    small variation in the values is possible. So, in such cases,
+    round down delta_idle_purr to delta_purr.
+    
+    Without this patch:
+    =====
+    System Configuration
+    type=Dedicated mode=Capped smt=8 lcpu=240 mem=67033290112 kB cpus=0
+    ent=240.00
+    
+    ---Actual---                 -Normalized-
+    %busy  %idle   Frequency     %busy  %idle
+    ------ ------  ------------- ------ ------
+     -0.03 100.02  3.93GHz[111%]   0.01 110.97
+      0.00 100.00  3.93GHz[111%]   0.01 110.99
+     -0.04 100.03  3.93GHz[111%]   0.01 110.98
+      0.06  99.95  3.93GHz[111%]   0.01 110.99
+      0.02  99.98  3.93GHz[111%]   0.01 110.99
+    =====
+    
+    With this patch:
+    =====
+    System Configuration
+    type=Dedicated mode=Capped smt=8 lcpu=240 mem=67033290112 kB cpus=0
+    ent=240.00
+    
+    ---Actual---                 -Normalized-
+    %busy  %idle   Frequency     %busy  %idle
+    ------ ------  ------------- ------ ------
+      0.03  99.96  3.93GHz[111%]   0.01 110.98
+      0.00 100.00  3.93GHz[111%]   0.01 110.99
+      0.03  99.97  3.93GHz[111%]   0.01 110.99
+      0.00 100.00  3.93GHz[111%]   0.01 110.99
+      0.09  99.90  3.93GHz[111%]   0.01 110.99
+    =====
+    
+    Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com>
+    Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/src/lparstat.c b/src/lparstat.c
+index 31a4ee8..eebba1f 100644
+--- a/src/lparstat.c
++++ b/src/lparstat.c
+@@ -492,6 +492,15 @@ void get_cpu_util_purr(struct sysentry *unused_se, char *buf)
+ 	delta_purr = get_delta_value("purr");
+ 	delta_idle_purr = get_delta_value("idle_purr");
+ 
++	/*
++	 * Given that these values are read from different
++	 * sources (purr from lparcfg and idle_purr from sysfs),
++	 * a small variation in the values is possible.
++	 * In such cases, round down delta_idle_purr to delta_purr.
++	 */
++	if (delta_idle_purr > delta_purr)
++		delta_idle_purr = delta_purr;
++
+ 	physc = (delta_purr - delta_idle_purr) / delta_tb;
+ 	physc *= 100.00;
+ 
+@@ -507,6 +516,15 @@ void get_cpu_idle_purr(struct sysentry *unused_se, char *buf)
+ 	delta_purr = get_delta_value("purr");
+ 	delta_idle_purr = get_delta_value("idle_purr");
+ 
++	/*
++	 * Given that these values are read from different
++	 * sources (purr from lparcfg and idle_purr from sysfs),
++	 * a small variation in the values is possible.
++	 * In such cases, round down delta_idle_purr to delta_purr.
++	 */
++	if (delta_idle_purr > delta_purr)
++		delta_idle_purr = delta_purr;
++
+ 	physc = (delta_purr - delta_idle_purr) / delta_tb;
+ 	idle = (delta_purr / delta_tb) - physc;
+ 	idle *= 100.00;

SOURCES/powerpc-utils-1.3.10-lparstat-Fix-offline-threads-uninitialized-entries.patch

@@ -0,0 +1,46 @@
+commit dee15756bcb287ccf39a904be07c90107b13844b
+Author: Laurent Dufour <ldufour@linux.ibm.com>
+Date:   Wed May 3 10:50:15 2023 +0200
+
+    lparstat: Fix offline threads uninitialized entries
+    
+    When some threads are offline, lparstat -E is failing like that:
+    
+    $ ppc64_cpu --info # CPU 20 is offline
+    Core   0:    0*    1*    2*    3*    4*    5*    6*    7*
+    Core   1:    8*    9*   10*   11*   12*   13*   14*   15*
+    Core   2:   16*   17*   18*   19*   20    21*   22*   23*
+    Core   3:   24*   25*   26*   27*   28*   29*   30*   31*
+    Core   4:   32*   33*   34*   35*   36*   37*   38*   39*
+    Core   5:   40*   41*   42*   43*   44*   45*   46*   47*
+    $ lparstat -E
+    Failed to read /sys/devices/system/cpu/cpu0/spurr
+    
+    The message is complaining about CPU0 but the real issue is that in
+    parse_sysfs_values() the test cpu_sysfs_fds[i].spurr >= 0 is valid even if
+    the entry has not been initialized (cpu_sysfs_fds is alloc cleared). So
+    if the number of threads online seen in assign_cpu_sysfs_fds is lower than
+    threads_in_system, the loop in parse_sysfs_values() will read uninitialized
+    entry, where .cpu=0.
+    
+    To prevent that, unset entries in the cpu_sysfs_fds should have the spurr
+    fd set to -1.
+    
+    Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/src/lparstat.c b/src/lparstat.c
+index a9e7bce..d2fdb3f 100644
+--- a/src/lparstat.c
++++ b/src/lparstat.c
+@@ -163,6 +163,10 @@ static int assign_cpu_sysfs_fds(int threads_in_system)
+ 		cpu_idx++;
+ 	}
+ 
++	/* Mark extra slots for offline threads unset, see parse_sysfs_values */
++	for (; cpu_idx < threads_in_system; cpu_idx++)
++		cpu_sysfs_fds[cpu_idx].spurr = -1;
++
+ 	return 0;
+ error:
+ 	fprintf(stderr, "Failed to open %s: %s\n",

SOURCES/powerpc-utils-1.3.10-lparstat-report-mixed-SMT-state.patch

@@ -0,0 +1,93 @@
+commit b2672fa3d462217ccd057a2cd307af2448e78757
+Author: Laurent Dufour <ldufour@linux.ibm.com>
+Date:   Wed May 3 10:50:14 2023 +0200
+
+    lparstat: report mixed SMT state
+    
+    when SMT state is mixed like this one (CPU 4 is offline):
+    
+    $ ppc64_cpu --info
+    Core   0:    0*    1*    2*    3*    4     5*    6*    7*
+    Core   1:    8*    9*   10*   11*   12*   13*   14*   15*
+    Core   2:   16*   17*   18*   19*   20*   21*   22*   23*
+    Core   3:   24*   25*   26*   27*   28*   29*   30*   31*
+    Core   4:   32*   33*   34*   35*   36*   37*   38*   39*
+    Core   5:   40*   41*   42*   43*   44*   45*   46*   47*
+    $ ppc64_cpu --smt
+    SMT=7: 0
+    SMT=8: 1-5
+    
+    ppc64_cpu --smt is handling that nicely but lparstat failed reporting the
+    SMT state:
+    $ /usr/sbin/lparstat
+    Failed to get smt state
+    
+    System Configuration
+    type=Dedicated mode=Capped smt=Capped lcpu=6 mem=65969728 kB cpus=0 ent=6.00
+    
+    %user  %sys %wait    %idle    physc %entc lbusy   app  vcsw phint
+    ----- ----- -----    -----    ----- ----- ----- ----- ----- -----
+     0.02  0.01  0.00    99.97     3.41 56.83  0.02  0.00 4061778   156
+    
+    Makes lparstat reporting "smt=mixed" in that case.
+    __do_smt is now returning 0 when the SMT state is mixed instead of -1 which
+    is also reported when an error is detected.
+    This doesn't change the call made by ppc64_cpu which is using
+    print_smt_state=true and so is expecting a returned value equal to 0 or -1.
+    
+    With that patch applied, lparstat print that in the above case:
+    $lparstat
+    
+    System Configuration
+    type=Dedicated mode=Capped smt=Mixed lcpu=6 mem=65969728 kB cpus=0 ent=6.00
+    
+    %user  %sys %wait    %idle    physc %entc lbusy   app  vcsw phint
+    ----- ----- -----    -----    ----- ----- ----- ----- ----- -----
+     0.01  0.01  0.00    99.97     3.43 57.17  0.02  0.00 4105654   156
+    
+    Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/src/common/cpu_info_helpers.c b/src/common/cpu_info_helpers.c
+index 925f220..c05d96d 100644
+--- a/src/common/cpu_info_helpers.c
++++ b/src/common/cpu_info_helpers.c
+@@ -245,7 +245,7 @@ int __do_smt(bool numeric, int cpus_in_system, int threads_per_cpu,
+ 			if (smt_state == 0)
+ 				smt_state = thread + 1;
+ 			else if (smt_state > 0)
+-				smt_state = -1; /* mix of SMT modes */
++				smt_state = 0; /* mix of SMT modes */
+ 		}
+ 	}
+ 
+@@ -257,7 +257,7 @@ int __do_smt(bool numeric, int cpus_in_system, int threads_per_cpu,
+ 			printf("SMT=1\n");
+ 		else
+ 			printf("SMT is off\n");
+-	} else if (smt_state == -1) {
++	} else if (smt_state == 0) {
+ 		for (thread = 0; thread < threads_per_cpu; thread++) {
+ 			if (CPU_COUNT_S(cpu_state_size,
+ 						cpu_states[thread])) {
+diff --git a/src/lparstat.c b/src/lparstat.c
+index eebba1f..a9e7bce 100644
+--- a/src/lparstat.c
++++ b/src/lparstat.c
+@@ -884,13 +884,15 @@ void get_smt_mode(struct sysentry *se, char *buf)
+ 	}
+ 
+ 	smt_state = parse_smt_state();
+-	if (smt_state < 0) {
++	if (smt_state == -1) {
+ 		fprintf(stderr, "Failed to get smt state\n");
+ 		return;
+ 	}
+ 
+ 	if (smt_state == 1)
+ 		sprintf(buf, "Off");
++	else if (smt_state == 0)
++		sprintf(buf, "Mixed");
+ 	else
+ 		sprintf(buf, "%d", smt_state);
+ }

SOURCES/powerpc-utils-1.3.10-manpages.patch

@@ -1,3 +1,18 @@
+diff -up powerpc-utils-1.3.5/man/pseries_platform.8.me powerpc-utils-1.3.5/man/pseries_platform.8
+--- powerpc-utils-1.3.5/man/pseries_platform.8.me	2018-11-29 16:50:07.601034729 +0100
++++ powerpc-utils-1.3.5/man/pseries_platform.8	2018-11-29 16:50:07.601034729 +0100
+@@ -0,0 +1,11 @@
++.\"
++.\" Copyright (C) 2015 International Business Machines
++.\"
++.TH pseries_platform 8 "September 2015" Linux "Linux on Power Service Tools"
++.SH NAME
++pseries_platform \- identify the platform and display the name of platform
++.SH SYNOPSIS
++.B /usr/bin/pseries_platform
++
++.SH DESCRIPTION
++The \fIpseries_platform\fR tool can identify the platform and display the name of platform.
 diff -up powerpc-utils-1.2.15/man/lsdevinfo.8.man powerpc-utils-1.2.15/man/lsdevinfo.8
 --- powerpc-utils-1.2.15/man/lsdevinfo.8.man	2013-01-16 15:31:13.886591137 +0100
 +++ powerpc-utils-1.2.15/man/lsdevinfo.8	2013-01-16 15:31:13.886591137 +0100
@@ -242,3 +257,95 @@ diff -up powerpc-utils-1.2.15/man/rtas_event_decode.8.man powerpc-utils-1.2.15/m
 +.BI \-w " width"
 +limit the output to the specified width, default width is 80 characters. The width must be > 0 and < 1024.
 +
+diff -up powerpc-utils-1.3.8/man/hcnmgr.8.me powerpc-utils-1.3.8/man/hcnmgr.8
+--- powerpc-utils-1.3.8/man/hcnmgr.8.me	2021-02-08 13:18:50.115407652 +0100
++++ powerpc-utils-1.3.8/man/hcnmgr.8	2021-02-08 13:18:43.734322981 +0100
+@@ -0,0 +1,47 @@
++.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.6.
++.TH HCNMGR "1" "hcnmgr contains a set of commands to support migratable SR_IOV logical port." "hcnmgr"
++.SH NAME
++hcnmgr \- hcnmgr contains a set of commands to support migratable SR_IOV logical port.
++.SH SYNOPSIS
++.B hcnmgr|hcnrmhcn|hcnrmdev|hcnqrydev|hcnversion
++[options]
++.SH DESCRIPTION
++hcnmgr contains a set of commands to support migratable SR_IOV logical port.
++The new commands configure/query/remove network devices. New commands should
++be called from the HMC, rather than directly from linux LPAR
++.PP
++Usage: hcncfgdrc DRC_INDEX=<drc_index> [STAKE_TOKEN=NULL] [-d]
++.IP
++Configure a device to hybrid network HCN
++.PP
++Usage: hcnrmhcn HCN_ID=<hcnid>
++.IP
++Remove a hybrid network HCN given an HCN ID
++.PP
++Usage: hcnrmdev DRC_INDEX=<drc_index> HCN_ID=<hcnid>
++.IP
++Unconfigure device from HCN
++.PP
++Usage: hcnqrydev DRC_INDEX=<drc_index> HCN_ID=<hcnid>
++.IP
++Query a device given a DRC_INDEX or HCN ID
++.PP
++Usage: hcnversion
++.IP
++get the current version of the HCN support
++.PP
++Optional arguments.
++.TP
++\fB\-s\fR
++scan device\-tree and configure HCN
++.TP
++\fB\-V\fR
++Display version information and exit
++.TP
++\fB\-h\fR
++Display this help information and exit
++.SH AUTHOR
++.B hcnmgr
++was written by Mingming Cao <mingming.cao@ibm.com>.
++.PP
++This manual page was written by Than Ngo <than@redhat.com>.
+diff -up powerpc-utils-1.3.5/man/update_flash_nv.8.me powerpc-utils-1.3.5/man/update_flash_nv.8
+--- powerpc-utils-1.3.5/man/update_flash_nv.8.me	2018-11-29 16:49:51.344987106 +0100
++++ powerpc-utils-1.3.5/man/update_flash_nv.8	2018-11-29 16:49:42.589961458 +0100
+@@ -0,0 +1,15 @@
++.\"
++.\" Copyright (C) 2015 International Business Machines
++.\"
++.TH pseries_platform 8 "September 2015" Linux "Linux on Power Service Tools"
++.SH NAME
++update_flash_nv \- is a simple wrapper script (update_flash) to pass the image.
++.SH SYNOPSIS
++.B /usr/bin/update_flash_nv
++
++.SH DESCRIPTION
++The \fIupdate_flash_nv\fR tool is simple wrapper script (update_flash) to pass the image.
++
++.SH SEE ALSO
++update_flash(8).
++
+diff -up powerpc-utils-1.3.10/Makefile.am.me powerpc-utils-1.3.10/Makefile.am
+--- powerpc-utils-1.3.10/Makefile.am.me	2022-06-03 12:35:01.335312481 +0200
++++ powerpc-utils-1.3.10/Makefile.am	2022-06-03 12:46:42.460763120 +0200
+@@ -48,7 +48,17 @@ man_MANS = \
+ 	man/vcpustat.8 \
+ 	man/rtas_dbg.8 \
+ 	man/drmgr.8 \
+-	man/lparnumascore.8
++	man/lparnumascore.8 \
++	man/lsdevinfo.8 \
++	man/rtas_event_decode.8 \
++	man/ls-vdev.8 \
++	man/lsprop.8 \
++	man/ls-veth.8 \
++	man/nvsetenv.8 \
++	man/ls-vscsi.8 \
++	man/pseries_platform.8 \
++	man/update_flash_nv.8 \
++	man/hcnmgr.8
+ 
+ EXTRA_DIST += $(bin_SCRIPTS) $(sbin_SCRIPTS) $(man_MANS)
+ 

SOURCES/powerpc-utils-1.3.5-pseries_platform-man.patch

@@ -1,15 +0,0 @@
-diff -up powerpc-utils-1.3.5/man/pseries_platform.8.me powerpc-utils-1.3.5/man/pseries_platform.8
---- powerpc-utils-1.3.5/man/pseries_platform.8.me	2018-11-29 16:50:07.601034729 +0100
-+++ powerpc-utils-1.3.5/man/pseries_platform.8	2018-11-29 16:50:07.601034729 +0100
-@@ -0,0 +1,11 @@
-+.\"
-+.\" Copyright (C) 2015 International Business Machines
-+.\"
-+.TH pseries_platform 8 "September 2015" Linux "Linux on Power Service Tools"
-+.SH NAME
-+pseries_platform \- identify the platform and display the name of platform
-+.SH SYNOPSIS
-+.B /usr/bin/pseries_platform
-+
-+.SH DESCRIPTION
-+The \fIpseries_platform\fR tool can identify the platform and display the name of platform.

SOURCES/powerpc-utils-1.3.5-update_flash_nv.patch

@@ -1,19 +0,0 @@
-diff -up powerpc-utils-1.3.5/man/update_flash_nv.8.me powerpc-utils-1.3.5/man/update_flash_nv.8
---- powerpc-utils-1.3.5/man/update_flash_nv.8.me	2018-11-29 16:49:51.344987106 +0100
-+++ powerpc-utils-1.3.5/man/update_flash_nv.8	2018-11-29 16:49:42.589961458 +0100
-@@ -0,0 +1,15 @@
-+.\"
-+.\" Copyright (C) 2015 International Business Machines
-+.\"
-+.TH pseries_platform 8 "September 2015" Linux "Linux on Power Service Tools"
-+.SH NAME
-+update_flash_nv \- is a simple wrapper script (update_flash) to pass the image.
-+.SH SYNOPSIS
-+.B /usr/bin/update_flash_nv
-+
-+.SH DESCRIPTION
-+The \fIupdate_flash_nv\fR tool is simple wrapper script (update_flash) to pass the image.
-+
-+.SH SEE ALSO
-+update_flash(8).
-+

SOURCES/powerpc-utils-1.3.8-hcnmgr.patch

@@ -1,132 +0,0 @@
-diff -up powerpc-utils-1.3.8/man/hcnmgr.8.me powerpc-utils-1.3.8/man/hcnmgr.8
---- powerpc-utils-1.3.8/man/hcnmgr.8.me	2020-10-01 13:09:19.969454947 +0200
-+++ powerpc-utils-1.3.8/man/hcnmgr.8	2020-10-01 13:09:29.969148204 +0200
-@@ -0,0 +1,35 @@
-+.TH hcnmgr "01 October 2020" "Linux" "Linux on Power Service Tools"
-+.RS
-+hcnmgr contains a set of commands to support migratable SR_IOV logical port.
-+The new commands configure/query/remove network devices. New commands should
-+be called from the HMC, rather than directly from linux LPAR
-+.PP
-+Usage: hcncfgdrc DRC_INDEX=<drc_index> [STAKE_TOKEN=NULL] [\fB-d\fP]
-+Configure a device to hybrid network HCN
-+.PP
-+Usage: hcnrmhcn HCN_ID=<hcnid>
-+Remove a hybrid network HCN given an HCN ID
-+.PP
-+Usage: hcnrmdev DRC_INDEX=<drc_index> HCN_ID=<hcnid>
-+Unconfigure device from HCN
-+.PP
-+Usage: hcnqrydev DRC_INDEX=<drc_index> HCN_ID=<hcnid>
-+Query a device given a DRC_INDEX or HCN ID
-+.PP
-+Usage: hcnversion
-+get the current version of the HCN support
-+.PP
-+Optional arguments.
-+.RS
-+.TP
-+.B
-+\fB-s\fP
-+scan device-tree and configure HCN
-+.TP
-+.B
-+\fB-V\fP
-+Display version information and exit
-+.TP
-+.B
-+\fB-h\fP
-+Display this help information and exit
-diff -up powerpc-utils-1.3.8/scripts/hcnmgr.me powerpc-utils-1.3.8/scripts/hcnmgr
---- powerpc-utils-1.3.8/scripts/hcnmgr.me	2020-10-01 13:03:10.839439027 +0200
-+++ powerpc-utils-1.3.8/scripts/hcnmgr	2020-10-01 13:06:18.479509944 +0200
-@@ -1,4 +1,4 @@
--#! /bin/bash
-+#!/usr/bin/bash
- 
- # Copyright (c) 2020 International Business Machines
- #
-@@ -562,34 +562,7 @@ scanhcn() {
- # Main
- #
- 
--#All echo messages goes into $LOG_FILE
--exec &> >(tee -a $LOG_FILE)
--
--#Start debug log $LOG_FILE with date and time
--NOW=$(date +"%m-%d-%Y %T")
--echo "=======================$NOW============================"
--
--#Validate this tool is running on powerpc platform
--. "$PSERIES_PLATFORM"
--if [ "$platform" != "$PLATFORM_PSERIES_LPAR" ]; then
--	err $E_EPERM
--fi
--
--#Validate NMCLI packages is install to manage networking
--if ! nmcli --version >/dev/null 2>&1; then
--	err $E_ENETUNREACH
--fi
--
--#Validate bonding module is loaded
--if ! lsmod | grep -q bonding; then
--	hcnlog DEBUG "HCNMGR: Bonding module not loaded, load module ..."
--	if ! modprobe bonding; then
--		err $E_NOMODULE
--	fi
--fi
--
- HCNCMD=$(basename "$0")
--hcnlog DEBUG "$HCNCMD enter"
- 
- #getops for help and version
- while getopts "sVhd:" arg; do
-@@ -616,6 +589,34 @@ while getopts "sVhd:" arg; do
- 	esac
- done
- 
-+#All echo messages goes into $LOG_FILE
-+exec &> >(tee -a $LOG_FILE)
-+
-+hcnlog DEBUG "$HCNCMD enter"
-+
-+#Start debug log $LOG_FILE with date and time
-+NOW=$(date +"%m-%d-%Y %T")
-+echo "=======================$NOW============================"
-+
-+#Validate this tool is running on powerpc platform
-+. "$PSERIES_PLATFORM"
-+if [ "$platform" != "$PLATFORM_PSERIES_LPAR" ]; then
-+        err $E_EPERM
-+fi
-+
-+#Validate NMCLI packages is install to manage networking
-+if ! nmcli --version >/dev/null 2>&1; then
-+        err $E_ENETUNREACH
-+fi
-+
-+#Validate bonding module is loaded
-+if ! lsmod | grep -q bonding; then
-+        hcnlog DEBUG "HCNMGR: Bonding module not loaded, load module ..."
-+        if ! modprobe bonding; then
-+                err $E_NOMODULE
-+        fi
-+fi
-+
- #Log this scripts command line to syslog
- hcnlog INFO "$HCNCMD $*"
- 
-diff -up powerpc-utils-1.3.8/Makefile.am.me powerpc-utils-1.3.8/Makefile.am
---- powerpc-utils-1.3.8/Makefile.am.me	2020-10-01 13:33:29.444024403 +0200
-+++ powerpc-utils-1.3.8/Makefile.am	2020-10-01 13:34:08.284854506 +0200
-@@ -56,7 +56,8 @@ man_MANS = \
- 	man/nvsetenv.8 \
- 	man/ls-vscsi.8 \
- 	man/pseries_platform.8 \
--	man/update_flash_nv.8
-+	man/update_flash_nv.8 \
-+	man/hcnmgr.8
- 
- EXTRA_DIST += $(bin_SCRIPTS) $(sbin_SCRIPTS) $(man_MANS)
- 
-diff -up powerpc-utils-1.3.8/Makefile.in.me powerpc-utils-1.3.8/Makefile.in

SOURCES/powerpc-utils-1.3.8-install-man.patch

@@ -1,14 +0,0 @@
-diff -up powerpc-utils-1.3.8/Makefile.am.me powerpc-utils-1.3.8/Makefile.am
---- powerpc-utils-1.3.8/Makefile.am.me	2020-09-04 11:37:54.042763518 +0200
-+++ powerpc-utils-1.3.8/Makefile.am	2020-09-04 11:39:06.262151924 +0200
-@@ -54,7 +54,9 @@ man_MANS = \
- 	man/lsprop.8 \
- 	man/ls-veth.8 \
- 	man/nvsetenv.8 \
--	man/ls-vscsi.8
-+	man/ls-vscsi.8 \
-+	man/pseries_platform.8 \
-+	man/update_flash_nv.8
- 
- EXTRA_DIST += $(bin_SCRIPTS) $(sbin_SCRIPTS) $(man_MANS)
- 

SOURCES/powerpc-utils-1.3.8-makefile.patch

@@ -1,19 +0,0 @@
-diff -up powerpc-utils-1.3.8/Makefile.am.me powerpc-utils-1.3.8/Makefile.am
---- powerpc-utils-1.3.8/Makefile.am.me	2020-09-04 11:34:16.575570705 +0200
-+++ powerpc-utils-1.3.8/Makefile.am	2020-09-04 11:35:36.499111663 +0200
-@@ -47,7 +47,14 @@ man_MANS = \
- 	man/errinjct.8 \
- 	man/vcpustat.8 \
- 	man/rtas_dbg.8 \
--	man/drmgr.8
-+	man/drmgr.8 \
-+	man/lsdevinfo.8 \
-+	man/rtas_event_decode.8 \
-+	man/ls-vdev.8 \
-+	man/lsprop.8 \
-+	man/ls-veth.8 \
-+	man/nvsetenv.8 \
-+	man/ls-vscsi.8
- 
- EXTRA_DIST += $(bin_SCRIPTS) $(sbin_SCRIPTS) $(man_MANS)
- 

SOURCES/powerpc-utils-b1b9e7-LMB_size_4GB.patch

@@ -0,0 +1,98 @@
+commit b1b9e76de0f3ab1dfcd9426779fa20fd77cd5625
+Author: Luciano Chavez <lnx1138@linux.ibm.com>
+Date:   Wed Aug 24 21:11:32 2022 -0500
+
+    lsslot: Fix lsslot -c mem output when using 4GB LMB size
+    
+    When using a LMB size of 4GB, the output of lsslot -c mem would get
+    reported incorrectly as:
+    
+    Dynamic Reconfiguration Memory (LMB size 0x0)
+    :
+        DRC Index: 80000001        Address: 100000000
+        Removable: No              Associativity: (index: 1) 0 1 4 9
+        Section(s):
+    
+    This patch changes the declaration of the _node_u._smem._lmb_size from
+    a uint32_t to uint64_t to store the value properly. Any variables that
+    store the lmb_size are also declared as uint64_t. In addition, we
+    use the PRIx64 macro in printf statements to properly print the
+    lmb_size value.
+    
+    The patch also includes a necessary change to declare the global
+    variable block_sz_bytes as a uint64_t to fix an infinite loop in
+    the function get_mem_scns() when the above changes were introduced.
+    
+    Signed-off-by: Luciano Chavez <lnx1138@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/src/drmgr/drmem.h b/src/drmgr/drmem.h
+index db5a47f..48108c5 100644
+--- a/src/drmgr/drmem.h
++++ b/src/drmgr/drmem.h
+@@ -58,7 +58,7 @@ struct drconf_mem_v2 {
+ #define LMB_REVERSE_SORT	1
+ #define LMB_RANDOM_SORT		2
+ 
+-extern int block_sz_bytes;
++extern uint64_t block_sz_bytes;
+ 
+ struct lmb_list_head *get_lmbs(unsigned int);
+ void free_lmbs(struct lmb_list_head *);
+diff --git a/src/drmgr/drslot_chrp_mem.c b/src/drmgr/drslot_chrp_mem.c
+index 3b78723..d37ee80 100644
+--- a/src/drmgr/drslot_chrp_mem.c
++++ b/src/drmgr/drslot_chrp_mem.c
+@@ -33,7 +33,7 @@
+ #include "drmem.h"
+ #include "common_numa.h"
+ 
+-int block_sz_bytes = 0;
++uint64_t block_sz_bytes = 0;
+ static char *state_strs[] = {"offline", "online"};
+ 
+ static char *usagestr = "-c mem {-a | -r} {-q <quantity> -p {variable_weight | ent_capacity} | {-q <quantity> | -s [<drc_name> | <drc_index>]}}";
+@@ -118,7 +118,7 @@ free_lmbs(struct lmb_list_head *lmb_list)
+ static int
+ get_mem_scns(struct dr_node *lmb)
+ {
+-	uint32_t lmb_sz = lmb->lmb_size;
++	uint64_t lmb_sz = lmb->lmb_size;
+ 	uint64_t phys_addr = lmb->lmb_address;
+ 	uint32_t mem_scn;
+ 	int rc = 0;
+diff --git a/src/drmgr/lsslot.c b/src/drmgr/lsslot.c
+index 87f876e..83e9e85 100644
+--- a/src/drmgr/lsslot.c
++++ b/src/drmgr/lsslot.c
+@@ -741,7 +741,7 @@ int print_drconf_mem(struct lmb_list_head *lmb_list)
+ 	if (usr_drc_name)
+ 		drc_index = strtol(usr_drc_name, NULL, 0);
+ 
+-	printf("Dynamic Reconfiguration Memory (LMB size 0x%x)\n",
++	printf("Dynamic Reconfiguration Memory (LMB size 0x%"PRIx64")\n",
+ 	       lmb_list->lmbs->lmb_size);
+ 
+ 	for (lmb = lmb_list->lmbs; lmb; lmb = lmb->next) {
+@@ -808,7 +808,7 @@ int lsslot_chrp_mem(void)
+ 	if (lmb_list->drconf_buf) {
+ 		print_drconf_mem(lmb_list);
+ 	} else {
+-		printf("lmb size: 0x%x\n", lmb_list->lmbs->lmb_size);
++		printf("lmb size: 0x%"PRIx64"\n", lmb_list->lmbs->lmb_size);
+ 		printf("%-20s  %-5s  %c  %s\n", "Memory Node", "Name", 'R',
+ 		       "Sections");
+ 		printf("%-20s  %-5s  %c  %s\n", "-----------", "----", '-',
+diff --git a/src/drmgr/ofdt.h b/src/drmgr/ofdt.h
+index 26c943a..bd90810 100644
+--- a/src/drmgr/ofdt.h
++++ b/src/drmgr/ofdt.h
+@@ -94,7 +94,7 @@ struct dr_node {
+ 	union {
+ 		struct mem_info {
+ 			uint64_t	_address;
+-			uint32_t	_lmb_size;
++			uint64_t	_lmb_size;
+ 			uint32_t	_lmb_aa_index;
+ 			struct mem_scn	*_mem_scns;
+ 			struct of_node	*_of_node;

SOURCES/powerpc-utils-e1f1de-lmb_address_in_hexadecimal.patch

@@ -0,0 +1,29 @@
+commit e1f1deb06d9168a95a381a2236e1d8c693d3d229
+Author: Luciano Chavez <lnx1138@linux.ibm.com>
+Date:   Wed Aug 24 21:17:54 2022 -0500
+
+    lsslot: Explicity declare that lmb_address be displayed in hexadecimal
+    
+    A printf statement used is lsslot.c was specifying the macro PRIu64 to
+    display the lmb_address. Depending on the compilation, this would
+    either display as a hexadecimal or decimal value.
+    
+    This patch replaces PRIu64 with PRIx64 to explicitly declare to print
+    the value as hexadecimal as that was is normally expected of an address.
+    
+    Signed-off-by: Luciano Chavez <lnx1138@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/src/drmgr/lsslot.c b/src/drmgr/lsslot.c
+index 7ea0f8b..87f876e 100644
+--- a/src/drmgr/lsslot.c
++++ b/src/drmgr/lsslot.c
+@@ -756,7 +756,7 @@ int print_drconf_mem(struct lmb_list_head *lmb_list)
+ 		printf("%s: %s\n", lmb->drc_name,
+ 		       lmb->is_owned ? "" : "Not Owned");
+ 
+-		printf("    DRC Index: %x        Address: %"PRIu64"\n",
++		printf("    DRC Index: %x        Address: %"PRIx64"\n",
+ 		       lmb->drc_index, lmb->lmb_address);
+ 		printf("    Removable: %s             Associativity: ",
+ 		       lmb->is_removable ? "Yes" : "No ");

SOURCES/powerpc-utils-f4c2b0-fix_display_of_mode_for_dedicated_donating_partition.patch

@@ -0,0 +1,93 @@
+commit f4c2b0d142f623e7dd28a5d685e446d41be75601
+Author: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
+Date:   Thu Aug 25 12:19:27 2022 +0530
+
+    lparstat: Fix display of mode for dedicated-donating partition
+    
+     From the lparstat man page:
+      mode
+      Indicates whether the partition processor capacity is capped or uncapped
+      allowing it to consume idle cycles from the shared pool. Dedicated LPAR
+      is capped or donating.
+    
+    However, on a dedicated partition, lparstat always displays the mode as
+    'Capped' today. Fix this by using 'DedDonMode' field from lparcfg for
+    determining the cycle donation status of a dedicated partition.
+    
+    On a dedicated-donating partition:
+      $ grep -e shared -e DedDonMode -e capped /proc/powerpc/lparcfg
+      DedDonMode=1
+      capped=1
+      shared_processor_mode=0
+    
+    Before this patch:
+      $ lparstat
+    
+      System Configuration
+      type=Dedicated mode=Capped smt=8 lcpu=1 mem=3335424 kB cpus=0 ent=1.00
+    
+    After this patch:
+      $ lparstat
+    
+      System Configuration
+      type=Dedicated mode=Donating smt=8 lcpu=1 mem=3335424 kB cpus=0 ent=1.00
+    
+    Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
+    Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/src/lparstat.c b/src/lparstat.c
+index 0b30fc9..e998e8c 100644
+--- a/src/lparstat.c
++++ b/src/lparstat.c
+@@ -718,6 +718,16 @@ void get_capped_mode(struct sysentry *se, char *buf)
+ 	sprintf(buf, "%s", value);
+ }
+ 
++void get_dedicated_mode(struct sysentry *se, char *buf)
++{
++	const char *value = "Capped";
++
++	if (se->value[0] == '1')
++		value = "Donating";
++
++	sprintf(buf, "%s", value);
++}
++
+ void get_percent_entry(struct sysentry *se, char *buf)
+ {
+ 	float value;
+@@ -1057,7 +1067,10 @@ void print_system_configuration(void)
+ 	get_sysdata("shared_processor_mode", &descr, value);
+ 	offset = sprintf(buf, "type=%s ", value);
+ 	sprintf(type, "%s", value);
+-	get_sysdata("capped", &descr, value);
++	if (!strcmp(value, "Dedicated"))
++		get_sysdata("DedDonMode", &descr, value);
++	else
++		get_sysdata("capped", &descr, value);
+ 	offset += sprintf(buf + offset, "mode=%s ", value);
+ 	get_sysdata("smt_state", &descr, value);
+ 	offset += sprintf(buf + offset, "smt=%s ", value);
+diff --git a/src/lparstat.h b/src/lparstat.h
+index 26ed4ba..b7c88e9 100644
+--- a/src/lparstat.h
++++ b/src/lparstat.h
+@@ -47,6 +47,7 @@ typedef struct cpu_sysfs_file_desc cpu_sysfs_fd;
+ 
+ extern void get_smt_state(struct sysentry *, char *);
+ extern void get_capped_mode(struct sysentry *, char *);
++extern void get_dedicated_mode(struct sysentry *, char *);
+ extern void get_memory_mode(struct sysentry *, char *);
+ extern void get_percent_entry(struct sysentry *, char *);
+ extern void get_phys_cpu_percentage(struct sysentry *, char *);
+@@ -110,7 +111,8 @@ struct sysentry system_data[] = {
+ 	{.name = "DesVarCapWt",
+ 	 .descr = "Desired Variable Capacity Weight"},
+ 	{.name = "DedDonMode",
+-	 .descr = "Dedicated Donation Mode"},
++	 .descr = "Dedicated Donation Mode",
++	 .get = &get_dedicated_mode},
+ 	{.name = "partition_entitled_capacity",
+ 	 .descr = "Partition Entitled Capacity"},
+ 	{.name = "system_active_processors",

SOURCES/powerpc-utils-fix_setting_primary_slave_across_reboots.patch

@@ -0,0 +1,27 @@
+commit acaf9c45a340f9bb49d6b21ba7ad60c21326ea73
+Author: Mingming Cao <mmc@linux.vnet.ibm.com>
+Date:   Mon Nov 7 14:39:02 2022 -0800
+
+    hcnmgr: Fix setting primary slave across reboots
+    
+    Using nmcli to set bonding of primary slave so that is set correctly
+    across reboots.
+    
+    Signed-off-by: Mingming Cao <mmc@linux.vnet.ibm.com>
+    [tyreld: Reworded commit log]
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/scripts/hcnmgr b/scripts/hcnmgr
+index 6946ff9..b5a6bfb 100644
+--- a/scripts/hcnmgr
++++ b/scripts/hcnmgr
+@@ -375,7 +375,8 @@ do_config_vdevice_nm() {
+ 	# if the device is primary, and link is up, force it as primary se
+ 	if [[ $MODE == "primary" ]]; then
+ 		hcnlog INFO "Change bonding primary slave to $DEVNAME"
+-		echo "$DEVNAME" >"$BOND_PATH"/primary
++		nmcli con mod id "$BONDNAME" +bond.options "primary=$DEVNAME"
++		nmcli con up "$BONDNAME"
+ 	fi
+ 
+ 	hcnlog DEBUG "do_config_vdevice: exit"

SOURCES/powerpc-utils-manpage-lparstat.patch

@@ -1,40 +0,0 @@
-lparstat -E option reports the actual and normalized system utilization
-based on the PURR/SPURR registers. Update the lparstat man page too with
-the -E option details.
-
-Reported-by: Pavithra Prakash <pavr...@in.ibm.com>
-Signed-off-by: Kamalesh Babulal <kama...@linux.vnet.ibm.com>
----
-Applies on top of next branch.
-
- man/lparstat.8 | 11 +++++++++++
- 1 file changed, 11 insertions(+)
-
-diff --git a/man/lparstat.8 b/man/lparstat.8
-index 0f4c923aaef5..d00e42600165 100644
---- a/man/lparstat.8
-+++ b/man/lparstat.8
-@@ -209,6 +209,17 @@ The variable memory capacity weight of the LPAR.
- .TP
- .SH
- .TP
-+\fB\-E\fR
-+Display Scaled Processor Utilization Resource Register(SPURR) based CPU utilization.
-+.RS
-+.RS
-+Actual CPU utilization is based on Processor Utilization Resource Register(PURR).
-+.RS
-+.RE
-+Normalized CPU utilization is based on Scaled Processor Utilization Resource Register(SPURR).
-+.TP
-+.SH
-+.TP
- \fB\-l, --legacy\fR
- Display the report in legacy format.
- .RS
-
-base-commit: 60d9f54b13b75feee3fd7b25a92b24d0d97ea984
---
-2.26.2
-
-

SPECS/powerpc-utils.spec

@@ -1,13 +1,27 @@
 Name: powerpc-utils
-Version: 1.3.8
-Release: 3%{?dist}
-Summary: Utilities for PowerPC platforms
+Version: 1.3.10
+Release: 6%{?dist}
+Summary: PERL-based scripts for maintaining and servicing PowerPC systems
 
 Group: System Environment/Base
 License: GPLv2
 URL: https://github.com/ibm-power-utilities/powerpc-utils
 Source0: https://github.com/ibm-power-utilities/%{name}/archive/v%{version}/%{name}-%{version}.tar.gz
-Source1: nvsetenv
+Source1: nx-gzip.udev
+Patch0: powerpc-utils-1.3.10-manpages.patch
+Patch1: powerpc-utils-1.3.10-distro.patch
+# bz#2121470, Fix lsslot -c mem output when using 4GB LMB size
+Patch3: powerpc-utils-b1b9e7-LMB_size_4GB.patch
+Patch4: powerpc-utils-e1f1de-lmb_address_in_hexadecimal.patch
+Patch5: powerpc-utils-fix_setting_primary_slave_across_reboots.patch
+Patch6: powerpc-utils-f4c2b0-fix_display_of_mode_for_dedicated_donating_partition.patch
+
+# lparstat: Fix-negative-values-seen-while-running-lpar
+Patch10: powerpc-utils-1.3.10-lparstat-Fix-negative-values-seen-while-running-lpar.patch
+# report-mixed-SMT-state
+Patch11: powerpc-utils-1.3.10-lparstat-report-mixed-SMT-state.patch
+# Fix-offline-threads-uninitialized-entries
+Patch12: powerpc-utils-1.3.10-lparstat-Fix-offline-threads-uninitialized-entries.patch
 
 ExclusiveArch: ppc %{power64}
 
@@ -20,51 +34,33 @@ BuildRequires: librtas-devel >= 1.4.0
 BuildRequires: libservicelog-devel >= 1.0.1-2
 BuildRequires: perl-generators
 BuildRequires: systemd
+BuildRequires: numactl-devel
 
-Requires: which
 # rtas_dump explicit dependency
 Requires: perl(Data::Dumper)
 Requires: %{name}-core = %{version}-%{release}
+
+%description
+PERL-based scripts for maintaining and servicing PowerPC systems.
+
+
+%package core
+Summary: Core utilities for maintaining and servicing PowerPC systems
 Requires(post): systemd
 Requires(preun): systemd
 Requires(postun): systemd
 Requires: kmod
 Requires: which
-
-Patch1: powerpc-utils-1.3.8-man.patch
-Patch2: powerpc-utils-1.3.8-makefile.patch
-Patch3: powerpc-utils-1.3.5-pseries_platform-man.patch
-Patch4: powerpc-utils-1.3.5-update_flash_nv.patch
-Patch5: powerpc-utils-1.3.8-install-man.patch
-Patch6: powerpc-utils-manpage-lparstat.patch
-Patch7: powerpc-utils-1.3.8-hcnmgr.patch
-Patch8: 0001-ofpathname-Use-NVMe-controller-physical-nsid.patch
-Patch9: 0002-sys_ident--skip-length-field-from-search.patch
-
-%description
-Utilities for PowerPC platforms.
-
-
-%package core
-Summary: Core utilities for PowerPC platforms
-
-Requires: /usr/bin/awk
-Requires: /usr/bin/basename
-Requires: /usr/bin/bc
-Requires: /usr/bin/cat
-Requires: /usr/bin/cut
-Requires: /usr/bin/echo
-Requires: /usr/bin/find
-Requires: /bin/grep
-Requires: /usr/bin/head
-Requires: /usr/bin/ls
-Requires: /usr/bin/sed
-Requires: /usr/bin/tr
-Requires: /usr/bin/udevadm
-
+Requires: gawk
+Requires: bc
+Requires: findutils
+Requires: grep
+Requires: sed
+Requires: systemd-udev
+Requires: coreutils
 
 %description core
-Core utilities for PowerPC platforms.
+Core utilities for maintaining and servicing PowerPC systems.
 
 
 %prep
@@ -80,7 +76,6 @@ make %{?_smp_mflags}
 
 %install
 make install DESTDIR=$RPM_BUILD_ROOT FILES= RCSCRIPTS=
-install -p -m 755 %{SOURCE1} $RPM_BUILD_ROOT%{_sbindir}/nvsetenv
 
 #define pkgdocdir {_datadir}/doc/{name}-{version}
 %{!?_pkgdocdir: %global _pkgdocdir %{_docdir}/%{name}-%{version}}
@@ -91,6 +86,9 @@ install $RPM_BUILD_ROOT/usr/share/doc/packages/powerpc-utils/* -t $RPM_BUILD_ROO
 rm -rf $RPM_BUILD_ROOT/usr/share/doc/packages/powerpc-utils
 rm -f $RPM_BUILD_ROOT%{_pkgdocdir}/COPYING
 
+# install udev rule for the nx-gzip accelerator
+install -pDm 644 %{SOURCE1} %{buildroot}%{_udevrulesdir}/90-nx-gzip.rules
+
 # remove init script and perl script. They are deprecated
 rm -rf $RPM_BUILD_ROOT/etc/init.d/ibmvscsis.sh $RPM_BUILD_ROOT/usr/sbin/vscsisadmin
 
@@ -104,32 +102,34 @@ ln -s serv_config.8 %{buildroot}%{_mandir}/man8/uspchrp.8
 # deprecated, use sosreport instead
 rm -f $RPM_BUILD_ROOT%{_sbindir}/snap $RPM_BUILD_ROOT%{_mandir}/man8/snap.8*
 
-%post
-systemctl daemon-reload >/dev/null 2>&1 || :
-systemctl start hcn-init.service >/dev/null 2>&1 || :
-systemctl enable hcn-init.service >/dev/null 2>&1 || :
+%post core
+%systemd_post hcn-init.service
 # update the smt.state file with current SMT
 /usr/sbin/smtstate --save >/dev/null 2>&1 || :
 
+%preun core
+%systemd_preun smtstate.service
+%systemd_preun hcn-init.service
 
-%preun
-svc=$(systemctl list-units -la | grep -Fq smtstate.service; echo $?)
-if [ "$svc" = "0" ]; then
-    systemctl stop smtstate.service >/dev/null 2>&1 || :
-    systemctl disable smtstate.service >/dev/null 2>&1 || :
-fi
-if systemctl is-enabled hcn-init.service |grep -q "enabled"; then
-        systemctl stop hcn-init.service >/dev/null 2>&1 || :
-        systemctl disable hcn-init.service >/dev/null 2>&1 || :
-fi
+%postun core
+%systemd_postun_with_restart smtstate.service
+%systemd_postun_with_restart hcn-init.service
 
-%postun
-systemctl daemon-reload >/dev/null 2>&1 || :
+%posttrans core
+systemctl enable hcn-init.service >/dev/null 2>&1 || :
 
 %files
+# PERL-based scripts for maintaining and servicing PowerPC systems
 %doc README Changelog
-%dir /var/lib/powerpc-utils
-/var/lib/powerpc-utils/smt.state
+%{_sbindir}/hvcsadmin
+%{_sbindir}/rtas_dump
+%{_mandir}/man8/hvcsadmin.8*
+%{_mandir}/man8/rtas_dump.8*
+
+%files core
+%license COPYING
+%dir %{_localstatedir}/lib/powerpc-utils
+%config(noreplace) %{_localstatedir}/lib/powerpc-utils/smt.state
 %{_unitdir}/smtstate.service
 %{_unitdir}/smt_off.service
 %{_unitdir}/hcn-init.service
@@ -137,7 +137,6 @@ systemctl daemon-reload >/dev/null 2>&1 || :
 %{_sbindir}/activate_firmware
 %{_sbindir}/bootlist
 %{_sbindir}/errinjct
-%{_sbindir}/hvcsadmin
 %{_sbindir}/lparstat
 %{_sbindir}/lsdevinfo
 %{_sbindir}/lsprop
@@ -148,7 +147,6 @@ systemctl daemon-reload >/dev/null 2>&1 || :
 %{_sbindir}/nvsetenv
 %{_sbindir}/ppc64_cpu
 %{_sbindir}/rtas_dbg
-%{_sbindir}/rtas_dump
 %{_sbindir}/rtas_event_decode
 %{_sbindir}/rtas_ibm_get_vpd
 %{_sbindir}/serv_config
@@ -166,12 +164,17 @@ systemctl daemon-reload >/dev/null 2>&1 || :
 %{_sbindir}/hcnversion
 %{_sbindir}/vcpustat
 %{_sbindir}/smtstate
+%{_sbindir}/nvram
+%{_sbindir}/ofpathname
+%{_sbindir}/pseries_platform
+%{_sbindir}/drmgr
+%{_sbindir}/lparnumascore
+%{_udevrulesdir}/90-nx-gzip.rules
 %{_mandir}/man1/amsstat.1*
 %{_mandir}/man5/lparcfg.5*
 %{_mandir}/man8/activate_firmware.8*
 %{_mandir}/man8/bootlist.8*
 %{_mandir}/man8/errinjct.8*
-%{_mandir}/man8/hvcsadmin.8*
 %{_mandir}/man8/lparstat.8*
 %{_mandir}/man8/lsdevinfo.8*
 %{_mandir}/man8/lsprop.8*
@@ -182,7 +185,6 @@ systemctl daemon-reload >/dev/null 2>&1 || :
 %{_mandir}/man8/nvsetenv.8*
 %{_mandir}/man8/ppc64_cpu.8*
 %{_mandir}/man8/rtas_dbg.8*
-%{_mandir}/man8/rtas_dump.8*
 %{_mandir}/man8/rtas_event_decode.8*
 %{_mandir}/man8/rtas_ibm_get_vpd.8*
 %{_mandir}/man8/serv_config.8*
@@ -196,18 +198,67 @@ systemctl daemon-reload >/dev/null 2>&1 || :
 %{_mandir}/man8/vcpustat.8.gz
 %{_mandir}/man8/smtstate.8.gz
 %{_mandir}/man8/hcnmgr.8*
-
-%files core
-%license COPYING
-%{_sbindir}/nvram
-%{_sbindir}/ofpathname
-%{_sbindir}/pseries_platform
-%{_sbindir}/drmgr
 %{_mandir}/man8/nvram.8*
 %{_mandir}/man8/ofpathname.8*
 %{_mandir}/man8/drmgr.8*
+%{_mandir}/man8/lparnumascore.8*
 
 %changelog
+* Wed Jul 26 2023 Than Ngo <than@redhat.com> - 1.3.10-6
+- Fix negative values seen while running lpar
+- Fix lparstat error with mixed SMT state
+Resolves: #2225135
+
+* Sat Jun 17 2023 Than Ngo <than@redhat.com> - 1.3.10-5
+- Resolves: #2207649, Add udev rule for the nx-gzip in to the core subpackage
+
+* Tue Apr 25 2023 Than Ngo <than@redhat.com> - 1.3.10-4
+- Resolves: #2166871, lparstat showing incorrect mode in a dedicated-donating LPAR
+
+* Mon Nov 28 2022 Than Ngo <than@redhat.com> - 1.3.10-3
+- Resolves: #2148878, HNV bond fails to come up with sriov interface as active slave
+
+* Fri Oct 21 2022 Than Ngo <than@redhat.com> - 1.3.10-2
+- Resolves: #2121481, Fix lsslot -c mem output when using 4GB LMB size
+
+* Mon Jun 06 2022 Than Ngo <than@redhat.com> - 1.3.10-1
+- Resolves: #2051330, Linux Hybrid Network Virtualization update
+- Resolves: #2083469, smtstate --save command failed 
+
+* Fri May 13 2022 Than Ngo <than@redhat.com> - 1.3.9-3
+- Resolves: #2059459, add new DRC type description strings for latest PCIe slot types 
+- Resolves: #2078514, Fix NM HNV setting primary slave
+- Resolves: #2083469, smtstate test failed as smtstate --save command failed
+
+* Thu Dec 09 2021 Than Ngo <than@redhat.com> - 1.3.9-1
+- Resolves: #2028690, rebase to 1.3.9
+
+* Thu Dec 02 2021 Than Ngo <than@redhat.com> - 1.3.8-10
+- Related: #2022225, increase release
+
+* Thu Nov 11 2021 Than Ngo <than@redhat.com> - 1.3.8-9
+- Resolves: #2022225, enable support vnic as backend for HNV interfaces 
+
+* Thu Oct 07 2021 Than Ngo <than@redhat.com> - 1.3.8-8
+- lsdevinfo: optimize criteria filtering
+
+* Fri Jul 16 2021 Than Ngo <than@redhat.com> - 1.3.8-7
+- Related: #1938420, Fix checking HCNID array size at boot time
+
+* Thu Apr 01 2021 Than Ngo <than@redhat.com> - 1.3.8-6
+- Resolves: #1935658, New lparstat -x option to report the security flavor
+- Resolves: #1953818, Use od instead xxd
+- Resolves: #1938420, rebase patch fix_boot-time_bonding_interface_cleanup_and_avoid_use_ifcfg 
+- Resolves: #1940358, ppc64_cpu --help does not list --version as an option 
+- Resolves: #1951068, take care of NUMA topology when removing memory (DLPAR)
+
+* Wed Feb 03 2021 Than Ngo <than@redhat.com> - 1.3.8-5
+- Resolves: #1924150, Fix boot-time bonding interface cleanup and avoid use ifcfg
+
+* Mon Dec 21 2020 Than Ngo <than@redhat.com> - 1.3.8-4
+- Resolves: #1909526, additional patches to support Linux Hybrid Network Virtualization
+- Resolves: #1909135, move commands that dont depend on perl to core subpackage
+
 * Tue Oct 06 2020 Than Ngo <than@redhat.com> - 1.3.8-3
 - Resolves: #1868474, ofpathname: Use NVMe controller physical nsid
 - Resolves: #1885532, sys_ident: Skip length field from search