.gitignore

@@ -1 +1 @@
-SOURCES/powerpc-utils-1.3.10.tar.gz
+SOURCES/powerpc-utils-1.3.8.tar.gz

.powerpc-utils.metadata

@@ -0,0 +1 @@
+526496eb7a3712d0d5a9ba0b4748b957625ede0e SOURCES/powerpc-utils-1.3.8.tar.gz

SOURCES/0001-ofpathname-Use-NVMe-controller-physical-nsid.patch

@@ -0,0 +1,78 @@
+From 21c860888425762468d339950518ab8b0940ecea Mon Sep 17 00:00:00 2001
+From: Tyrel Datwyler <tyreld@linux.ibm.com>
+Date: Mon, 5 Oct 2020 13:03:45 -0700
+Subject: [PATCH] ofpathname: Use NVMe controller physical nsid
+
+Linux creates logical block devices of the the form nvmeXnYpZ such that X = the
+controller, Y = namepsace, and Z = partition. For example:
+
+/dev/nvme0n1p1
+
+The Linux namespace numbering scheme for namespaces always starts at 1 and
+increases monotonically regardless of the actual numbering scheme of the
+namespaces as seen by the  physical NVMe controller. Accordingly, the Open
+firmware path binding utilizes the namespace id as seen by the controller and
+not the necessarily the one given in the logical block device name.
+
+As such we need to use the "nsid" attribute in the sysfs entry for the logical
+device to properly map back and forth from OP pathnames.
+
+Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+---
+ scripts/ofpathname | 24 ++++++++++++++++--------
+ 1 file changed, 16 insertions(+), 8 deletions(-)
+
+diff --git a/scripts/ofpathname b/scripts/ofpathname
+index 2ceae25..41b8c5c 100755
+--- a/scripts/ofpathname
++++ b/scripts/ofpathname
+@@ -659,6 +659,11 @@ l2of_nvme()
+         devspec=`$CAT $PWD/device/devspec | tr -d '\000'`
+         if [[ -n $devspec ]]; then
+             found=1
++            if [[ -n $devnsid ]]; then
++                # Linux logical nsid might not match nvme controller nsid
++                goto_dir $dir "nsid"
++                devnsid=`$CAT $PWD/nsid | tr -d '\000'`
++            fi
+             break
+         fi
+     done
+@@ -1609,16 +1614,9 @@ of2l_nvme()
+     local dir
+     local link
+ 
+-    for dir in `$FIND /sys/block -name "nvme*n$nsid"`; do
++    for dir in `$FIND /sys/class/nvme -name "nvme[0-9]*"`; do
+         cd $dir
+ 
+-        link=`get_link "device"` # points to nvme[0-9]+ (non-namespace)
+-        if [[ -n $link ]]; then
+-            cd $link
+-        else
+-            continue
+-        fi
+-
+         link=`get_link "device"` # points to pci address dir
+         if [[ -n $link ]]; then
+             cd $link
+@@ -1635,6 +1633,16 @@ of2l_nvme()
+         fi
+     done
+ 
++    for dir in `$FIND /sys/block -name "${LOGICAL_DEVNAME}n[0-9]*"`; do
++	    cd $dir
++
++	    local devnsid=`$CAT ./nsid 2>/dev/null`
++	    if [[ $devnsid = $nsid ]]; then
++		    LOGICAL_DEVNAME="${dir##*/}"
++		    break
++	    fi
++    done
++
+     if [[ -n $LOGICAL_DEVNAME ]] \
+     && [[ -n $part ]]; then
+ 
+-- 
+1.8.3.1
+

SOURCES/0002-sys_ident--skip-length-field-from-search.patch

@@ -0,0 +1,13 @@
+diff -up powerpc-utils-1.3.8/src/sys_ident.c.me powerpc-utils-1.3.8/src/sys_ident.c
+--- powerpc-utils-1.3.8/src/sys_ident.c.me	2020-10-06 15:35:56.620350621 +0200
++++ powerpc-utils-1.3.8/src/sys_ident.c	2020-10-06 15:36:31.468849936 +0200
+@@ -267,7 +267,8 @@ print_proc_sn_value(void)
+ 						"parameter from RTAS\n");
+ 				return 2;
+ 			}
+-			pos = strstr(buf, "uid=");
++			/* Ignore length field (first 2 bytes) */
++			pos = strstr(buf +2, "uid=");
+ 			if (pos == NULL) {
+ 				fprintf(stderr, "Parameter from RTAS does "
+ 						"not contain uid\n");

SOURCES/nvsetenv

@@ -0,0 +1,14 @@
+#!/bin/sh
+
+if [ "$1" = "--version" ]; then
+   echo This version of nvsetenv is just a wrapper to invoke nvram
+   exit 0
+fi
+if [ -z "$1" ]; then
+   nvram --print-config
+elif [ -z "$2" ]; then
+   nvram --print-config="$1"
+else
+   nvram --update-config "$1"="$2"
+fi
+exit $?

SOURCES/nx-gzip.udev

@@ -1 +0,0 @@
-KERNEL=="nx-gzip", MODE="0666"

SOURCES/powerpc-utils-1.3.10-distro.patch

@@ -1,11 +0,0 @@
-diff -up powerpc-utils-1.3.10/Makefile.am.me powerpc-utils-1.3.10/Makefile.am
---- powerpc-utils-1.3.10/Makefile.am.me	2022-06-03 12:35:01.335312481 +0200
-+++ powerpc-utils-1.3.10/Makefile.am	2022-06-03 14:11:58.453820076 +0200
-@@ -229,7 +229,6 @@ install-data-hook:
- 	$(INSTALL_DATA) systemd/smtstate.service $(DESTDIR)${systemd_unit_dir}/
- 	$(INSTALL_DATA) systemd/hcn-init.service $(DESTDIR)${systemd_unit_dir}/
- 	$(INSTALL_DATA) var/lib/powerpc-utils/smt.state $(DESTDIR)/var/lib/@PACKAGE@/
--	$(INSTALL_SCRIPT) scripts/functions.suse $(DESTDIR)/usr/lib/@PACKAGE@/
- 	$(INSTALL_SCRIPT) scripts/smtstate $(DESTDIR)@sbindir@
- 	sed -i -e 's,$${exec_prefix},@prefix@,g' $(DESTDIR)${systemd_unit_dir}/smt_off.service
- 	sed -i -e 's,$${exec_prefix},@prefix@,g' $(DESTDIR)${systemd_unit_dir}/smtstate.service

SOURCES/powerpc-utils-1.3.10-lparstat-Fix-negative-values-seen-while-running-lpar.patch

@@ -1,84 +0,0 @@
-commit 73ba26c1240a25e7699449e82cfc09dad10fed80
-Author: Sathvika Vasireddy <sv@linux.ibm.com>
-Date:   Fri Dec 9 15:26:46 2022 +0530
-
-    lparstat: Fix negative values seen while running lparstat with -E option
-    
-    Negative values are seen while running lparstat with -E option.
-    This is because delta_purr value is less than delta_idle_purr.
-    Given that these values are read from different sources, a
-    small variation in the values is possible. So, in such cases,
-    round down delta_idle_purr to delta_purr.
-    
-    Without this patch:
-    =====
-    System Configuration
-    type=Dedicated mode=Capped smt=8 lcpu=240 mem=67033290112 kB cpus=0
-    ent=240.00
-    
-    ---Actual---                 -Normalized-
-    %busy  %idle   Frequency     %busy  %idle
-    ------ ------  ------------- ------ ------
-     -0.03 100.02  3.93GHz[111%]   0.01 110.97
-      0.00 100.00  3.93GHz[111%]   0.01 110.99
-     -0.04 100.03  3.93GHz[111%]   0.01 110.98
-      0.06  99.95  3.93GHz[111%]   0.01 110.99
-      0.02  99.98  3.93GHz[111%]   0.01 110.99
-    =====
-    
-    With this patch:
-    =====
-    System Configuration
-    type=Dedicated mode=Capped smt=8 lcpu=240 mem=67033290112 kB cpus=0
-    ent=240.00
-    
-    ---Actual---                 -Normalized-
-    %busy  %idle   Frequency     %busy  %idle
-    ------ ------  ------------- ------ ------
-      0.03  99.96  3.93GHz[111%]   0.01 110.98
-      0.00 100.00  3.93GHz[111%]   0.01 110.99
-      0.03  99.97  3.93GHz[111%]   0.01 110.99
-      0.00 100.00  3.93GHz[111%]   0.01 110.99
-      0.09  99.90  3.93GHz[111%]   0.01 110.99
-    =====
-    
-    Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com>
-    Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
-    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
-
-diff --git a/src/lparstat.c b/src/lparstat.c
-index 31a4ee8..eebba1f 100644
---- a/src/lparstat.c
-+++ b/src/lparstat.c
-@@ -492,6 +492,15 @@ void get_cpu_util_purr(struct sysentry *unused_se, char *buf)
- 	delta_purr = get_delta_value("purr");
- 	delta_idle_purr = get_delta_value("idle_purr");
- 
-+	/*
-+	 * Given that these values are read from different
-+	 * sources (purr from lparcfg and idle_purr from sysfs),
-+	 * a small variation in the values is possible.
-+	 * In such cases, round down delta_idle_purr to delta_purr.
-+	 */
-+	if (delta_idle_purr > delta_purr)
-+		delta_idle_purr = delta_purr;
-+
- 	physc = (delta_purr - delta_idle_purr) / delta_tb;
- 	physc *= 100.00;
- 
-@@ -507,6 +516,15 @@ void get_cpu_idle_purr(struct sysentry *unused_se, char *buf)
- 	delta_purr = get_delta_value("purr");
- 	delta_idle_purr = get_delta_value("idle_purr");
- 
-+	/*
-+	 * Given that these values are read from different
-+	 * sources (purr from lparcfg and idle_purr from sysfs),
-+	 * a small variation in the values is possible.
-+	 * In such cases, round down delta_idle_purr to delta_purr.
-+	 */
-+	if (delta_idle_purr > delta_purr)
-+		delta_idle_purr = delta_purr;
-+
- 	physc = (delta_purr - delta_idle_purr) / delta_tb;
- 	idle = (delta_purr / delta_tb) - physc;
- 	idle *= 100.00;

SOURCES/powerpc-utils-1.3.10-lparstat-Fix-offline-threads-uninitialized-entries.patch

@@ -1,46 +0,0 @@
-commit dee15756bcb287ccf39a904be07c90107b13844b
-Author: Laurent Dufour <ldufour@linux.ibm.com>
-Date:   Wed May 3 10:50:15 2023 +0200
-
-    lparstat: Fix offline threads uninitialized entries
-    
-    When some threads are offline, lparstat -E is failing like that:
-    
-    $ ppc64_cpu --info # CPU 20 is offline
-    Core   0:    0*    1*    2*    3*    4*    5*    6*    7*
-    Core   1:    8*    9*   10*   11*   12*   13*   14*   15*
-    Core   2:   16*   17*   18*   19*   20    21*   22*   23*
-    Core   3:   24*   25*   26*   27*   28*   29*   30*   31*
-    Core   4:   32*   33*   34*   35*   36*   37*   38*   39*
-    Core   5:   40*   41*   42*   43*   44*   45*   46*   47*
-    $ lparstat -E
-    Failed to read /sys/devices/system/cpu/cpu0/spurr
-    
-    The message is complaining about CPU0 but the real issue is that in
-    parse_sysfs_values() the test cpu_sysfs_fds[i].spurr >= 0 is valid even if
-    the entry has not been initialized (cpu_sysfs_fds is alloc cleared). So
-    if the number of threads online seen in assign_cpu_sysfs_fds is lower than
-    threads_in_system, the loop in parse_sysfs_values() will read uninitialized
-    entry, where .cpu=0.
-    
-    To prevent that, unset entries in the cpu_sysfs_fds should have the spurr
-    fd set to -1.
-    
-    Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
-    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
-
-diff --git a/src/lparstat.c b/src/lparstat.c
-index a9e7bce..d2fdb3f 100644
---- a/src/lparstat.c
-+++ b/src/lparstat.c
-@@ -163,6 +163,10 @@ static int assign_cpu_sysfs_fds(int threads_in_system)
- 		cpu_idx++;
- 	}
- 
-+	/* Mark extra slots for offline threads unset, see parse_sysfs_values */
-+	for (; cpu_idx < threads_in_system; cpu_idx++)
-+		cpu_sysfs_fds[cpu_idx].spurr = -1;
-+
- 	return 0;
- error:
- 	fprintf(stderr, "Failed to open %s: %s\n",

SOURCES/powerpc-utils-1.3.10-lparstat-report-mixed-SMT-state.patch

@@ -1,93 +0,0 @@
-commit b2672fa3d462217ccd057a2cd307af2448e78757
-Author: Laurent Dufour <ldufour@linux.ibm.com>
-Date:   Wed May 3 10:50:14 2023 +0200
-
-    lparstat: report mixed SMT state
-    
-    when SMT state is mixed like this one (CPU 4 is offline):
-    
-    $ ppc64_cpu --info
-    Core   0:    0*    1*    2*    3*    4     5*    6*    7*
-    Core   1:    8*    9*   10*   11*   12*   13*   14*   15*
-    Core   2:   16*   17*   18*   19*   20*   21*   22*   23*
-    Core   3:   24*   25*   26*   27*   28*   29*   30*   31*
-    Core   4:   32*   33*   34*   35*   36*   37*   38*   39*
-    Core   5:   40*   41*   42*   43*   44*   45*   46*   47*
-    $ ppc64_cpu --smt
-    SMT=7: 0
-    SMT=8: 1-5
-    
-    ppc64_cpu --smt is handling that nicely but lparstat failed reporting the
-    SMT state:
-    $ /usr/sbin/lparstat
-    Failed to get smt state
-    
-    System Configuration
-    type=Dedicated mode=Capped smt=Capped lcpu=6 mem=65969728 kB cpus=0 ent=6.00
-    
-    %user  %sys %wait    %idle    physc %entc lbusy   app  vcsw phint
-    ----- ----- -----    -----    ----- ----- ----- ----- ----- -----
-     0.02  0.01  0.00    99.97     3.41 56.83  0.02  0.00 4061778   156
-    
-    Makes lparstat reporting "smt=mixed" in that case.
-    __do_smt is now returning 0 when the SMT state is mixed instead of -1 which
-    is also reported when an error is detected.
-    This doesn't change the call made by ppc64_cpu which is using
-    print_smt_state=true and so is expecting a returned value equal to 0 or -1.
-    
-    With that patch applied, lparstat print that in the above case:
-    $lparstat
-    
-    System Configuration
-    type=Dedicated mode=Capped smt=Mixed lcpu=6 mem=65969728 kB cpus=0 ent=6.00
-    
-    %user  %sys %wait    %idle    physc %entc lbusy   app  vcsw phint
-    ----- ----- -----    -----    ----- ----- ----- ----- ----- -----
-     0.01  0.01  0.00    99.97     3.43 57.17  0.02  0.00 4105654   156
-    
-    Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
-    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
-
-diff --git a/src/common/cpu_info_helpers.c b/src/common/cpu_info_helpers.c
-index 925f220..c05d96d 100644
---- a/src/common/cpu_info_helpers.c
-+++ b/src/common/cpu_info_helpers.c
-@@ -245,7 +245,7 @@ int __do_smt(bool numeric, int cpus_in_system, int threads_per_cpu,
- 			if (smt_state == 0)
- 				smt_state = thread + 1;
- 			else if (smt_state > 0)
--				smt_state = -1; /* mix of SMT modes */
-+				smt_state = 0; /* mix of SMT modes */
- 		}
- 	}
- 
-@@ -257,7 +257,7 @@ int __do_smt(bool numeric, int cpus_in_system, int threads_per_cpu,
- 			printf("SMT=1\n");
- 		else
- 			printf("SMT is off\n");
--	} else if (smt_state == -1) {
-+	} else if (smt_state == 0) {
- 		for (thread = 0; thread < threads_per_cpu; thread++) {
- 			if (CPU_COUNT_S(cpu_state_size,
- 						cpu_states[thread])) {
-diff --git a/src/lparstat.c b/src/lparstat.c
-index eebba1f..a9e7bce 100644
---- a/src/lparstat.c
-+++ b/src/lparstat.c
-@@ -884,13 +884,15 @@ void get_smt_mode(struct sysentry *se, char *buf)
- 	}
- 
- 	smt_state = parse_smt_state();
--	if (smt_state < 0) {
-+	if (smt_state == -1) {
- 		fprintf(stderr, "Failed to get smt state\n");
- 		return;
- 	}
- 
- 	if (smt_state == 1)
- 		sprintf(buf, "Off");
-+	else if (smt_state == 0)
-+		sprintf(buf, "Mixed");
- 	else
- 		sprintf(buf, "%d", smt_state);
- }

SOURCES/powerpc-utils-1.3.5-pseries_platform-man.patch

@@ -0,0 +1,15 @@
+diff -up powerpc-utils-1.3.5/man/pseries_platform.8.me powerpc-utils-1.3.5/man/pseries_platform.8
+--- powerpc-utils-1.3.5/man/pseries_platform.8.me	2018-11-29 16:50:07.601034729 +0100
++++ powerpc-utils-1.3.5/man/pseries_platform.8	2018-11-29 16:50:07.601034729 +0100
+@@ -0,0 +1,11 @@
++.\"
++.\" Copyright (C) 2015 International Business Machines
++.\"
++.TH pseries_platform 8 "September 2015" Linux "Linux on Power Service Tools"
++.SH NAME
++pseries_platform \- identify the platform and display the name of platform
++.SH SYNOPSIS
++.B /usr/bin/pseries_platform
++
++.SH DESCRIPTION
++The \fIpseries_platform\fR tool can identify the platform and display the name of platform.

SOURCES/powerpc-utils-1.3.5-update_flash_nv.patch

@@ -0,0 +1,19 @@
+diff -up powerpc-utils-1.3.5/man/update_flash_nv.8.me powerpc-utils-1.3.5/man/update_flash_nv.8
+--- powerpc-utils-1.3.5/man/update_flash_nv.8.me	2018-11-29 16:49:51.344987106 +0100
++++ powerpc-utils-1.3.5/man/update_flash_nv.8	2018-11-29 16:49:42.589961458 +0100
+@@ -0,0 +1,15 @@
++.\"
++.\" Copyright (C) 2015 International Business Machines
++.\"
++.TH pseries_platform 8 "September 2015" Linux "Linux on Power Service Tools"
++.SH NAME
++update_flash_nv \- is a simple wrapper script (update_flash) to pass the image.
++.SH SYNOPSIS
++.B /usr/bin/update_flash_nv
++
++.SH DESCRIPTION
++The \fIupdate_flash_nv\fR tool is simple wrapper script (update_flash) to pass the image.
++
++.SH SEE ALSO
++update_flash(8).
++

SOURCES/powerpc-utils-1.3.8-4b2d10942e2d964ecc1fe58c9460c34993ff10be.patch

@@ -0,0 +1,162 @@
+commit 4b2d10942e2d964ecc1fe58c9460c34993ff10be
+Author: Mingming Cao <mmc@linux.vnet.ibm.com>
+Date:   Thu Nov 19 21:38:24 2020 -0800
+
+    Disable vnic as backup vdevice for migratable SR_IOV
+    
+    In version 1.0 we only allow configure ibmveth as
+    migritable SR_IOV backup vdevice. When ibmvnic become
+    more stablized we will enable vnic as backup.
+    
+    Signed-off-by: Mingming Cao <mmc@linux.vnet.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/scripts/hcnmgr b/scripts/hcnmgr
+index 1135a85..0c09d8c 100644
+--- a/scripts/hcnmgr
++++ b/scripts/hcnmgr
+@@ -37,6 +37,8 @@ DRC_INDEX=0
+ DEVNAME=""
+ MODE=""
+ PHYSLOC=""
++VIO_TYPE=""
++VNIC_SPT=""
+ 
+ # Usage statements
+ usage() {
+@@ -80,6 +82,7 @@ E_EPERM=1         # Platform not supported
+ E_BUSY=16         # Device busy
+ E_ENODEV=19       # Failed get device name
+ E_NOMODULE=5      # Failed to load bonding module
++E_INVAL_DEV=6     # Vdevice not supported
+ E_ENETUNREACH=101 # No network management command nmcli
+ 
+ #
+@@ -93,19 +96,22 @@ err() {
+ 
+ 	case $eno in
+ 	"$E_INVAL")
+-		e_mesg="$HCNCMD:error code $eno, hybrid network ID HCNID does not exist"
++		e_mesg="$HCNCMD:error code $eno, Hybrid network ID HCNID does not exist"
++		;;
++	"$E_INVAL_DEV")
++		e_mesg="$HCNCMD:error code $eno, Backing vdevice not supported"
+ 		;;
+ 	"$E_EPERM")
+-		e_mesg="$HCNCMD:error code $eno, platform is not supported"
++		e_mesg="$HCNCMD:error code $eno, Platform is not supported"
+ 		;;
+ 	"$E_BUSY")
+-		e_mesg="$HCNCMD:error code $eno, network device busy, no backup device"
++		e_mesg="$HCNCMD:error code $eno, Network device busy, no backup device"
+ 		;;
+ 	"$E_ENODEV")
+-		e_mesg="$HCNCMD:error code $eno, failed to find device or get device name"
++		e_mesg="$HCNCMD:error code $eno, Failed to find device or get device name"
+ 		;;
+ 	"$E_NOMODULE")
+-		e_mesg="$HCNCMD:error code $eno, failed to load bonding module"
++		e_mesg="$HCNCMD:error code $eno, Failed to load bonding module"
+ 		;;
+ 	"$E_ENETUNREACH")
+ 		e_mesg="$HCNCMD:error code $eno, nmcli command not installed"
+@@ -147,6 +153,7 @@ hcnlog() {
+ 	esac
+ 
+ }
++
+ # function search_dev:
+ #	Given DRX_INDEX, Search for device-tree, looking for migratable SR_IOV
+ #	backend vnic or ibmveth device to configure hybrid network
+@@ -171,6 +178,7 @@ search_dev() {
+ 			if [ -e "$dev"/ibm,hcn-id ] && get_dev_hcn "$dev"; then
+ 				hcnlog DEBUG "search_dev: found device "
+ 				hcnlog DEBUG "search_dev: exit"
++				VIO_TYPE="SRIOV"
+ 				return $E_SUCCESS
+ 			fi
+ 		done
+@@ -184,6 +192,7 @@ search_dev() {
+ 		if [[ $index == "$1" ]]; then
+ 			hcnlog DEBUG "found matching drc_index $index in $dev"
+ 			if [ -e "$dev"/ibm,hcn-id ] && get_dev_hcn "$dev"; then
++				VIO_TYPE="VNIC"
+ 				hcnlog DEBUG "search_dev: found device "
+ 				hcnlog DEBUG "search_dev: exit"
+ 				return $E_SUCCESS
+@@ -201,6 +210,7 @@ search_dev() {
+ 			if [ -e "$dev"/ibm,hcn-id ] && get_dev_hcn "$dev"; then
+ 				hcnlog DEBUG "search_dev: found device "
+ 				hcnlog DEBUG "search_dev: exit"
++				VIO_TYPE="L_LAN"
+ 				return $E_SUCCESS
+ 			fi
+ 		fi
+@@ -340,6 +350,10 @@ do_config_vdevice() {
+ cfghcn() {
+ 	hcnlog DEBUG "cfghcn: enter $1"
+ 	search_dev "$1"
++	if [[ $VIO_TYPE == "VNIC" && $VNIC_SPT == "OFF" ]]; then
++		hcnlog WARN "Backing device $VIO_TYPE for Migratable VF is not supported in hcnmgr version $VERSION"
++		err $E_INVAL_DEV
++	fi
+ 	do_config_vdevice
+ 	return $E_SUCCESS
+ }
+@@ -512,23 +526,10 @@ scanhcn() {
+ 		done
+ 	done
+ 
+-	hcnlog DEBUG "search vnic device with ibm,hcn-id propterty......"
++	hcnlog DEBUG "search ibmveth device with ibm,hcn-id propterty......"
+ 	# Look at every vNIC device with ibm,hcn-id propterty
+ 	# join or create bond for this hcnid if not exist, add vnic device as
+ 	# slave for this bond accosiated with hcnid, if not already to
+-	for dev in "$DT_PATH"/vdevice/vnic*; do
+-		[ -d "$dev" ] || continue
+-		if [ -e "$dev"/ibm,hcn-id ] && get_dev_hcn "$dev"; then
+-			hcnlog DEBUG "scanhcn found vnic device with hcnid "
+-			hcnlog INFO "scanhcn configure HCN and vnic device"
+-			do_config_vdevice
+-		fi
+-	done
+-
+-	# Look at every veth device with ibm,hcn-id propterty
+-	# join or create bond for this hcnid if not exist, add ibmveth device as
+-	# slave for this bond accosiated with hcnid, if not already to
+-	hcnlog DEBUG "search ibmveth device with ibm,hcn-id propterty......"
+ 	for dev in "$DT_PATH"/vdevice/l-lan*; do
+ 		[ -d "$dev" ] || continue
+ 		if [ -e "$dev"/ibm,hcn-id ] && get_dev_hcn "$dev"; then
+@@ -538,6 +539,21 @@ scanhcn() {
+ 		fi
+ 	done
+ 
++	if [[ $VNIC_SPT != "OFF" ]]; then
++		hcnlog DEBUG "search vnic device with ibm,hcn-id propterty......"
++		# Look at every vNIC device with ibm,hcn-id propterty
++		# join or create bond for this hcnid if not exist, add vnic device as
++		# slave for this bond accosiated with hcnid, if not already to
++		for dev in "$DT_PATH"/vdevice/vnic*; do
++			[ -d "$dev" ] || continue
++			if [ -e "$dev"/ibm,hcn-id ] && get_dev_hcn "$dev"; then
++				hcnlog DEBUG "scanhcn found vnic device with hcnid "
++				hcnlog INFO "scanhcn configure HCN and vnic device"
++				do_config_vdevice
++			fi
++		done
++	fi
++
+ 	# Next clean up dead connections left from orgitinal LPAR after inactive miration
+ 
+ 	# list of all HCN ids
+@@ -583,6 +599,9 @@ fi
+ if ! nmcli --version >/dev/null 2>&1; then
+ 	err $E_ENETUNREACH
+ fi
++if [[ $VERSION == "1.0" ]]; then
++	VNIC_SPT="OFF"
++fi
+ 
+ #Validate bonding module is loaded
+ if ! lsmod | grep -q bonding; then

SOURCES/powerpc-utils-1.3.8-e51995667279164a6c8ce4c3ba0217fffda22d6d.patch

@@ -0,0 +1,86 @@
+commit e51995667279164a6c8ce4c3ba0217fffda22d6d
+Author: Mingming Cao <mmc@linux.vnet.ibm.com>
+Date:   Thu Nov 19 21:41:31 2020 -0800
+
+    Clean up dead network config interface after inactive migration
+    
+    With inactive parition migration, we found there are
+    dead network interface asscoiated with the SR_IOV from
+    source LPAR that still exist.
+    
+    We need to cleanup the old network interface
+    related to this devname from source LPAR. Normally
+    in the active parition migration case, this was done
+    when HMC issue commands to OS remove the
+    VF from hybrid network. Because of the inactive
+    migration, the OS was not notified before migration
+    that the VF was removed, thus leaves the dead network
+    interface belongs on the original MVF on source lpar
+    not cleaned up. This cause the confusion of the network
+    manager to bring up the bondings with new MVFs at destination
+    LPAR.
+    
+    After inactive parition migration the same devname
+    could possiblily used at the destination LPAR.
+    It can be assigned to a different hybrid
+    network (different hcnid). At the OS boot time,
+    the same devname but with different hcnid will
+    be configured. However the old network work interface
+    associated with the same devname from the source LPAR
+    has not been cleaned up yet.
+    
+    This patch fix this by during the boot time scan and
+    if found an VFs has more than two bonding interfaces,
+    or has old VF ifcfg, removed the expired one.
+    
+    Signed-off-by: Mingming Cao <mmc@linux.vnet.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/scripts/hcnmgr b/scripts/hcnmgr
+index 0c09d8c..a76505e 100644
+--- a/scripts/hcnmgr
++++ b/scripts/hcnmgr
+@@ -518,6 +518,27 @@ scanhcn() {
+ 			[ -d "$dev" ] || continue
+ 			if [ -e "$dev"/ibm,hcn-id ] && get_dev_hcn "$dev"; then
+ 				hcnlog DEBUG "scanhcn found sr-iov device with hcnid "
++
++				# After online from inactive migration, destination
++				# LPAR may have same mvf devname but associated with different
++				# bonding than from source LPAR
++				# clean up expired bonding SR_IOV connections
++
++				for cfg in $(ls $IFCONFIG_PATH | grep "$DEVNAME" | grep "bond"); do
++					hid=$(echo "$cfg" | sed -e 's/ifcfg-//' | cut -d '-' -f 1 | sed -e 's/bond//')
++					if [ -e "$IFCONFIG_PATH/ifcfg-$DEVNAME" ]; then
++						rm "$IFCONFIG_PATH/ifcfg-$DEVNAME"
++					fi
++					if [[ $hid != "" && $hid != "$HCNID" ]] ; then
++						hcnlog INFO "Delete dead bonding slave ifcfg file $IFCONFIG_PATH/$cfg"
++						rm $IFCONFIG_PATH/"$cfg"
++						if nmcli -f NAME con show | grep -q "bond$hid-$DEVNAME\s"; then
++							hcnlog INFO "Delete dead bonding connection $connection"
++							nmcli con delete "bond$hid-$DEVNAME"
++						fi
++					fi
++				done
++
+ 				hcnlog INFO "scanhcn configure HCN and sr-iov device"
+ 				do_config_vdevice
+ 				# Save found HCN ids in array HcnIds
+@@ -558,13 +579,12 @@ scanhcn() {
+ 
+ 	# list of all HCN ids
+ 	ids="${HcnIds[*]}"
+-
+ 	# After inactive migration, LPAR may have old bonding connections
+ 	# with network device on original LPAR
+-	# clean up dead bonding connections
++    # clean up dead bonding connections
+ 	for connection in $(nmcli -f NAME con show | grep "${ids// /\\|}"); do
+ 		dev=$(echo "$connection" | cut -d '-' -f 2)
+-		if [ ! -e /sys/class/net/"$dev" ]; then
++		if [[ $dev != "NAME" && ! -e /sys/class/net/"$dev" ]]; then
+ 			hcnlog INFO "Delete dead bonding connection $connection"
+ 			nmcli con delete "$connection"
+ 		fi

SOURCES/powerpc-utils-1.3.8-f1ec5f04fdac3e87c3c85c2d85f79339d916e864.patch

@@ -0,0 +1,94 @@
+commit f1ec5f04fdac3e87c3c85c2d85f79339d916e864
+Author: Mingming Cao <mmc@linux.vnet.ibm.com>
+Date:   Thu Nov 19 21:30:40 2020 -0800
+
+    HNV fixes for qrydev and remove lsdevinfo
+    
+    This patch fixes a few issues found during testing:
+    
+    1) Fix qrydev checking for active interface error
+    
+    2) Skip collecting lsdevinfo right before migration
+    When the LPARs has large number of devices, this can
+    take quite a long time and flood the log message.
+    
+    3) Wait for OS ready to lookup device name for configure
+    HNV device. We need give OS longer time to prepare pci
+    device after DLPAR to show up for ofpathname(). We have
+    run into several issues HNV issues the hcncfgdrc command
+    to configure the vdevices before ofpathname able
+    to find the device name yet.
+    
+    4) Currently the hybrid network virtualization is only
+    supported on PowerVM LPAR. We should allow exit the hcnmgr
+    gracefully on other power platform instead of return error.
+    
+    Signed-off-by: Mingming Cao <mmc@linux.vnet.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/scripts/hcnmgr b/scripts/hcnmgr
+index e699c6a..1135a85 100644
+--- a/scripts/hcnmgr
++++ b/scripts/hcnmgr
+@@ -218,7 +218,7 @@ search_dev() {
+ # $1 path to device-tree device
+ #
+ get_dev_hcn() {
+-	local wait=30
++	local wait=12
+ 	local dev=$1
+ 
+ 	hcnlog DEBUG "get_dev_hcn: enter $1"
+@@ -235,7 +235,7 @@ get_dev_hcn() {
+ 		fi
+ 
+ 		hcnlog DEBUG "ofpathname return $?, devname is $DEVNAME rety counter $wait"
+-		sleep 1
++		sleep 15
+ 
+ 		((wait--))
+ 		if [[ $wait == 0 ]]; then
+@@ -393,7 +393,7 @@ qrydev() {
+ 	BOND_PATH=$BOND_BASEPATH/$BONDNAME/bonding
+ 
+ 	hcnlog DEBUG "check if the network interface for this SR_IOV is not up, return success"
+-	if ! nmcli -f DEVICE con show --active | grep -q "$BONDNAME-$DEVNAME"; then
++	if ! nmcli -f DEVICE con show --active | grep -q "$DEVNAME"; then
+ 		hcnlog DEBUG "network connection $BONDNAME-$DEVNAME is inactive or nonexist"
+ 		hcnlog DEBUG "HCNID $HCNID devname $DEVNAME mode $MODE physloc $PHYSLOC"
+ 		hcnlog DEBUG "qryhcn: exit"
+@@ -435,7 +435,6 @@ show_hcnstatus() {
+ 	nmcli connection show >>$LOG_FILE
+ 	nmcli device status >>$LOG_FILE
+ 	ip addr show >>$LOG_FILE
+-	lsdevinfo >>$LOG_FILE
+ }
+ 
+ #
+@@ -569,10 +568,15 @@ exec &> >(tee -a $LOG_FILE)
+ NOW=$(date +"%m-%d-%Y %T")
+ echo "=======================$NOW============================"
+ 
++HCNCMD=$(basename "$0")
++hcnlog DEBUG "$HCNCMD enter"
++
+ #Validate this tool is running on powerpc platform
+ . "$PSERIES_PLATFORM"
+ if [ "$platform" != "$PLATFORM_PSERIES_LPAR" ]; then
+-	err $E_EPERM
++	hcnlog INFO "HNV is only supported on PowerVM LPAR"
++	hcnlog INFO "$HCNCMD exit"
++	exit 0
+ fi
+ 
+ #Validate NMCLI packages is install to manage networking
+@@ -588,9 +592,6 @@ if ! lsmod | grep -q bonding; then
+ 	fi
+ fi
+ 
+-HCNCMD=$(basename "$0")
+-hcnlog DEBUG "$HCNCMD enter"
+-
+ #getops for help and version
+ while getopts "sVhd:" arg; do
+ 	case "$arg" in

SOURCES/powerpc-utils-1.3.8-fix_boot-time_bonding_interface_cleanup_and_avoid_use_ifcfg.patch

@@ -0,0 +1,96 @@
+commit bfabc531021ee9cfc4c8dd83803e9daf7e45d91e
+Author: Mingming Cao <mmc@linux.vnet.ibm.com>
+Date:   Thu Jan 28 12:49:07 2021 -0800
+
+    Fix boot-time bonding interface cleanup and avoid use ifcfg
+    
+    This patch fix three issues
+    1) Avoid cleanup bond interface at the boot time when there is no HNV exists
+    
+    2) Using nmcli instead of ifconfig file to check bond configuration as it
+    has been officially deprecated. This makes HNV configure bonding
+    indpendant of where bonding cfg file located.
+    
+    3) At the time of calling ofpathname to look up for devicename, wait
+    for sys fs device ready. Otherwise the OS may in the middle of device
+    renaming.
+    
+    Signed-off-by: Mingming Cao <mmc@linux.vnet.ibm.com>
+
+diff --git a/scripts/hcnmgr b/scripts/hcnmgr
+index a76505e..e4b56d6 100644
+--- a/scripts/hcnmgr
++++ b/scripts/hcnmgr
+@@ -241,7 +241,10 @@ get_dev_hcn() {
+ 	# Let's retry a few times.
+ 	while [ $wait != 0 ]; do
+ 		if DEVNAME=$(ofpathname -l "$(echo "$1" | sed -e "s/\/proc\/device-tree//")" 2>/dev/null); then
+-			break
++			if [ -e /sys/class/net/"$DEVNAME" ]; then
++				hcnlog DEBUG "ofpathname waiting for /sys/class/net device $DEVNAME ready"
++				break
++			fi
+ 		fi
+ 
+ 		hcnlog DEBUG "ofpathname return $?, devname is $DEVNAME rety counter $wait"
+@@ -278,9 +281,7 @@ do_config_vdevice() {
+ 	BOND_PATH=$BOND_BASEPATH/$BONDNAME/bonding
+ 
+ 	hcnlog DEBUG "Check if there is bond $BONDNAME with hcn id $HCNID"
+-
+-	hcnlog DEBUG "ifconfig file $IFCONFIG_PATH/ifconfig-$BONDNAME"
+-	if [ ! -e "$IFCONFIG_PATH/ifcfg-$BONDNAME" ]; then
++	if ! nmcli -f NAME con show --active | grep -q "$BONDNAME\s"; then
+ 		hcnlog INFO "nmcli con add type bond con-name $BONDNAME ifname $BONDNAME"
+ 		nmcli con add type bond con-name "$BONDNAME" ifname "$BONDNAME"
+ 
+@@ -375,7 +376,10 @@ rmhcn() {
+ 	fi
+ 
+ 	hcnlog INFO "rmhcn: delete bond $BONDNAME and slaves "
+-	nmcli -f NAME con show | grep "$BONDNAME" | xargs sudo nmcli con delete
++	for connection in $(nmcli -f NAME con show | grep "$BONDNAME"); do
++		hcnlog INFO "Delete bonding connection $connection"
++		nmcli con delete "$connection"
++	done
+ 	hcnlog DEBUG "rmhcn: exit"
+ 	return $E_SUCCESS
+ }
+@@ -576,19 +580,24 @@ scanhcn() {
+ 	fi
+ 
+ 	# Next clean up dead connections left from orgitinal LPAR after inactive miration
+-
+-	# list of all HCN ids
+-	ids="${HcnIds[*]}"
+-	# After inactive migration, LPAR may have old bonding connections
+-	# with network device on original LPAR
+-    # clean up dead bonding connections
+-	for connection in $(nmcli -f NAME con show | grep "${ids// /\\|}"); do
+-		dev=$(echo "$connection" | cut -d '-' -f 2)
+-		if [[ $dev != "NAME" && ! -e /sys/class/net/"$dev" ]]; then
+-			hcnlog INFO "Delete dead bonding connection $connection"
+-			nmcli con delete "$connection"
+-		fi
+-	done
++	# Only do this when the HNV ID array is not empty
++
++	if [[ ${HcnIds[[@]} ]]; then
++		hcnlog INFO "hcnscan finished. Found HNV devices on this LPAR"
++
++		# list of all HCN ids
++		ids="${HcnIds[*]}"
++		# After inactive migration, LPAR may have old bonding connections
++		# with network device on original LPAR
++		# clean up dead bonding connections
++		for connection in $(nmcli -f NAME con show | grep "${ids// /\\|}"); do
++			dev=$(echo "$connection" | cut -d '-' -f 2)
++			if [[ $dev != "NAME" && ! -e /sys/class/net/"$dev" ]]; then
++				hcnlog INFO "Delete dead bonding connection $connection"
++				nmcli con delete "$connection"
++			fi
++		done
++	fi
+ 
+ 	hcnlog DEBUG "scanhcn: scan for hybrid virtual network finished"
+ }

SOURCES/powerpc-utils-1.3.8-hcnmgr.patch

@@ -0,0 +1,52 @@
+diff -up powerpc-utils-1.3.8/man/hcnmgr.8.me powerpc-utils-1.3.8/man/hcnmgr.8
+--- powerpc-utils-1.3.8/man/hcnmgr.8.me	2020-10-01 13:09:19.969454947 +0200
++++ powerpc-utils-1.3.8/man/hcnmgr.8	2020-10-01 13:09:29.969148204 +0200
+@@ -0,0 +1,35 @@
++.TH hcnmgr "01 October 2020" "Linux" "Linux on Power Service Tools"
++.RS
++hcnmgr contains a set of commands to support migratable SR_IOV logical port.
++The new commands configure/query/remove network devices. New commands should
++be called from the HMC, rather than directly from linux LPAR
++.PP
++Usage: hcncfgdrc DRC_INDEX=<drc_index> [STAKE_TOKEN=NULL] [\fB-d\fP]
++Configure a device to hybrid network HCN
++.PP
++Usage: hcnrmhcn HCN_ID=<hcnid>
++Remove a hybrid network HCN given an HCN ID
++.PP
++Usage: hcnrmdev DRC_INDEX=<drc_index> HCN_ID=<hcnid>
++Unconfigure device from HCN
++.PP
++Usage: hcnqrydev DRC_INDEX=<drc_index> HCN_ID=<hcnid>
++Query a device given a DRC_INDEX or HCN ID
++.PP
++Usage: hcnversion
++get the current version of the HCN support
++.PP
++Optional arguments.
++.RS
++.TP
++.B
++\fB-s\fP
++scan device-tree and configure HCN
++.TP
++.B
++\fB-V\fP
++Display version information and exit
++.TP
++.B
++\fB-h\fP
++Display this help information and exit
+diff -up powerpc-utils-1.3.8/Makefile.am.me powerpc-utils-1.3.8/Makefile.am
+--- powerpc-utils-1.3.8/Makefile.am.me	2020-10-01 13:33:29.444024403 +0200
++++ powerpc-utils-1.3.8/Makefile.am	2020-10-01 13:34:08.284854506 +0200
+@@ -56,7 +56,8 @@ man_MANS = \
+ 	man/nvsetenv.8 \
+ 	man/ls-vscsi.8 \
+ 	man/pseries_platform.8 \
+-	man/update_flash_nv.8
++	man/update_flash_nv.8 \
++	man/hcnmgr.8
+ 
+ EXTRA_DIST += $(bin_SCRIPTS) $(sbin_SCRIPTS) $(man_MANS)
+ 

SOURCES/powerpc-utils-1.3.8-install-man.patch

@@ -0,0 +1,14 @@
+diff -up powerpc-utils-1.3.8/Makefile.am.me powerpc-utils-1.3.8/Makefile.am
+--- powerpc-utils-1.3.8/Makefile.am.me	2020-09-04 11:37:54.042763518 +0200
++++ powerpc-utils-1.3.8/Makefile.am	2020-09-04 11:39:06.262151924 +0200
+@@ -54,7 +54,9 @@ man_MANS = \
+ 	man/lsprop.8 \
+ 	man/ls-veth.8 \
+ 	man/nvsetenv.8 \
+-	man/ls-vscsi.8
++	man/ls-vscsi.8 \
++	man/pseries_platform.8 \
++	man/update_flash_nv.8
+ 
+ EXTRA_DIST += $(bin_SCRIPTS) $(sbin_SCRIPTS) $(man_MANS)
+ 

SOURCES/powerpc-utils-1.3.8-makefile.patch

@@ -0,0 +1,19 @@
+diff -up powerpc-utils-1.3.8/Makefile.am.me powerpc-utils-1.3.8/Makefile.am
+--- powerpc-utils-1.3.8/Makefile.am.me	2020-09-04 11:34:16.575570705 +0200
++++ powerpc-utils-1.3.8/Makefile.am	2020-09-04 11:35:36.499111663 +0200
+@@ -47,7 +47,14 @@ man_MANS = \
+ 	man/errinjct.8 \
+ 	man/vcpustat.8 \
+ 	man/rtas_dbg.8 \
+-	man/drmgr.8
++	man/drmgr.8 \
++	man/lsdevinfo.8 \
++	man/rtas_event_decode.8 \
++	man/ls-vdev.8 \
++	man/lsprop.8 \
++	man/ls-veth.8 \
++	man/nvsetenv.8 \
++	man/ls-vscsi.8
+ 
+ EXTRA_DIST += $(bin_SCRIPTS) $(sbin_SCRIPTS) $(man_MANS)
+ 

SOURCES/powerpc-utils-1.3.8-man.patch

@@ -1,18 +1,3 @@
-diff -up powerpc-utils-1.3.5/man/pseries_platform.8.me powerpc-utils-1.3.5/man/pseries_platform.8
---- powerpc-utils-1.3.5/man/pseries_platform.8.me	2018-11-29 16:50:07.601034729 +0100
-+++ powerpc-utils-1.3.5/man/pseries_platform.8	2018-11-29 16:50:07.601034729 +0100
-@@ -0,0 +1,11 @@
-+.\"
-+.\" Copyright (C) 2015 International Business Machines
-+.\"
-+.TH pseries_platform 8 "September 2015" Linux "Linux on Power Service Tools"
-+.SH NAME
-+pseries_platform \- identify the platform and display the name of platform
-+.SH SYNOPSIS
-+.B /usr/bin/pseries_platform
-+
-+.SH DESCRIPTION
-+The \fIpseries_platform\fR tool can identify the platform and display the name of platform.
 diff -up powerpc-utils-1.2.15/man/lsdevinfo.8.man powerpc-utils-1.2.15/man/lsdevinfo.8
 --- powerpc-utils-1.2.15/man/lsdevinfo.8.man	2013-01-16 15:31:13.886591137 +0100
 +++ powerpc-utils-1.2.15/man/lsdevinfo.8	2013-01-16 15:31:13.886591137 +0100
@@ -257,95 +242,3 @@ diff -up powerpc-utils-1.2.15/man/rtas_event_decode.8.man powerpc-utils-1.2.15/m
 +.BI \-w " width"
 +limit the output to the specified width, default width is 80 characters. The width must be > 0 and < 1024.
 +
-diff -up powerpc-utils-1.3.8/man/hcnmgr.8.me powerpc-utils-1.3.8/man/hcnmgr.8
---- powerpc-utils-1.3.8/man/hcnmgr.8.me	2021-02-08 13:18:50.115407652 +0100
-+++ powerpc-utils-1.3.8/man/hcnmgr.8	2021-02-08 13:18:43.734322981 +0100
-@@ -0,0 +1,47 @@
-+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.6.
-+.TH HCNMGR "1" "hcnmgr contains a set of commands to support migratable SR_IOV logical port." "hcnmgr"
-+.SH NAME
-+hcnmgr \- hcnmgr contains a set of commands to support migratable SR_IOV logical port.
-+.SH SYNOPSIS
-+.B hcnmgr|hcnrmhcn|hcnrmdev|hcnqrydev|hcnversion
-+[options]
-+.SH DESCRIPTION
-+hcnmgr contains a set of commands to support migratable SR_IOV logical port.
-+The new commands configure/query/remove network devices. New commands should
-+be called from the HMC, rather than directly from linux LPAR
-+.PP
-+Usage: hcncfgdrc DRC_INDEX=<drc_index> [STAKE_TOKEN=NULL] [-d]
-+.IP
-+Configure a device to hybrid network HCN
-+.PP
-+Usage: hcnrmhcn HCN_ID=<hcnid>
-+.IP
-+Remove a hybrid network HCN given an HCN ID
-+.PP
-+Usage: hcnrmdev DRC_INDEX=<drc_index> HCN_ID=<hcnid>
-+.IP
-+Unconfigure device from HCN
-+.PP
-+Usage: hcnqrydev DRC_INDEX=<drc_index> HCN_ID=<hcnid>
-+.IP
-+Query a device given a DRC_INDEX or HCN ID
-+.PP
-+Usage: hcnversion
-+.IP
-+get the current version of the HCN support
-+.PP
-+Optional arguments.
-+.TP
-+\fB\-s\fR
-+scan device\-tree and configure HCN
-+.TP
-+\fB\-V\fR
-+Display version information and exit
-+.TP
-+\fB\-h\fR
-+Display this help information and exit
-+.SH AUTHOR
-+.B hcnmgr
-+was written by Mingming Cao <mingming.cao@ibm.com>.
-+.PP
-+This manual page was written by Than Ngo <than@redhat.com>.
-diff -up powerpc-utils-1.3.5/man/update_flash_nv.8.me powerpc-utils-1.3.5/man/update_flash_nv.8
---- powerpc-utils-1.3.5/man/update_flash_nv.8.me	2018-11-29 16:49:51.344987106 +0100
-+++ powerpc-utils-1.3.5/man/update_flash_nv.8	2018-11-29 16:49:42.589961458 +0100
-@@ -0,0 +1,15 @@
-+.\"
-+.\" Copyright (C) 2015 International Business Machines
-+.\"
-+.TH pseries_platform 8 "September 2015" Linux "Linux on Power Service Tools"
-+.SH NAME
-+update_flash_nv \- is a simple wrapper script (update_flash) to pass the image.
-+.SH SYNOPSIS
-+.B /usr/bin/update_flash_nv
-+
-+.SH DESCRIPTION
-+The \fIupdate_flash_nv\fR tool is simple wrapper script (update_flash) to pass the image.
-+
-+.SH SEE ALSO
-+update_flash(8).
-+
-diff -up powerpc-utils-1.3.10/Makefile.am.me powerpc-utils-1.3.10/Makefile.am
---- powerpc-utils-1.3.10/Makefile.am.me	2022-06-03 12:35:01.335312481 +0200
-+++ powerpc-utils-1.3.10/Makefile.am	2022-06-03 12:46:42.460763120 +0200
-@@ -48,7 +48,17 @@ man_MANS = \
- 	man/vcpustat.8 \
- 	man/rtas_dbg.8 \
- 	man/drmgr.8 \
--	man/lparnumascore.8
-+	man/lparnumascore.8 \
-+	man/lsdevinfo.8 \
-+	man/rtas_event_decode.8 \
-+	man/ls-vdev.8 \
-+	man/lsprop.8 \
-+	man/ls-veth.8 \
-+	man/nvsetenv.8 \
-+	man/ls-vscsi.8 \
-+	man/pseries_platform.8 \
-+	man/update_flash_nv.8 \
-+	man/hcnmgr.8
- 
- EXTRA_DIST += $(bin_SCRIPTS) $(sbin_SCRIPTS) $(man_MANS)
- 

SOURCES/powerpc-utils-b1b9e7-LMB_size_4GB.patch

@@ -1,98 +0,0 @@
-commit b1b9e76de0f3ab1dfcd9426779fa20fd77cd5625
-Author: Luciano Chavez <lnx1138@linux.ibm.com>
-Date:   Wed Aug 24 21:11:32 2022 -0500
-
-    lsslot: Fix lsslot -c mem output when using 4GB LMB size
-    
-    When using a LMB size of 4GB, the output of lsslot -c mem would get
-    reported incorrectly as:
-    
-    Dynamic Reconfiguration Memory (LMB size 0x0)
-    :
-        DRC Index: 80000001        Address: 100000000
-        Removable: No              Associativity: (index: 1) 0 1 4 9
-        Section(s):
-    
-    This patch changes the declaration of the _node_u._smem._lmb_size from
-    a uint32_t to uint64_t to store the value properly. Any variables that
-    store the lmb_size are also declared as uint64_t. In addition, we
-    use the PRIx64 macro in printf statements to properly print the
-    lmb_size value.
-    
-    The patch also includes a necessary change to declare the global
-    variable block_sz_bytes as a uint64_t to fix an infinite loop in
-    the function get_mem_scns() when the above changes were introduced.
-    
-    Signed-off-by: Luciano Chavez <lnx1138@linux.ibm.com>
-    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
-
-diff --git a/src/drmgr/drmem.h b/src/drmgr/drmem.h
-index db5a47f..48108c5 100644
---- a/src/drmgr/drmem.h
-+++ b/src/drmgr/drmem.h
-@@ -58,7 +58,7 @@ struct drconf_mem_v2 {
- #define LMB_REVERSE_SORT	1
- #define LMB_RANDOM_SORT		2
- 
--extern int block_sz_bytes;
-+extern uint64_t block_sz_bytes;
- 
- struct lmb_list_head *get_lmbs(unsigned int);
- void free_lmbs(struct lmb_list_head *);
-diff --git a/src/drmgr/drslot_chrp_mem.c b/src/drmgr/drslot_chrp_mem.c
-index 3b78723..d37ee80 100644
---- a/src/drmgr/drslot_chrp_mem.c
-+++ b/src/drmgr/drslot_chrp_mem.c
-@@ -33,7 +33,7 @@
- #include "drmem.h"
- #include "common_numa.h"
- 
--int block_sz_bytes = 0;
-+uint64_t block_sz_bytes = 0;
- static char *state_strs[] = {"offline", "online"};
- 
- static char *usagestr = "-c mem {-a | -r} {-q <quantity> -p {variable_weight | ent_capacity} | {-q <quantity> | -s [<drc_name> | <drc_index>]}}";
-@@ -118,7 +118,7 @@ free_lmbs(struct lmb_list_head *lmb_list)
- static int
- get_mem_scns(struct dr_node *lmb)
- {
--	uint32_t lmb_sz = lmb->lmb_size;
-+	uint64_t lmb_sz = lmb->lmb_size;
- 	uint64_t phys_addr = lmb->lmb_address;
- 	uint32_t mem_scn;
- 	int rc = 0;
-diff --git a/src/drmgr/lsslot.c b/src/drmgr/lsslot.c
-index 87f876e..83e9e85 100644
---- a/src/drmgr/lsslot.c
-+++ b/src/drmgr/lsslot.c
-@@ -741,7 +741,7 @@ int print_drconf_mem(struct lmb_list_head *lmb_list)
- 	if (usr_drc_name)
- 		drc_index = strtol(usr_drc_name, NULL, 0);
- 
--	printf("Dynamic Reconfiguration Memory (LMB size 0x%x)\n",
-+	printf("Dynamic Reconfiguration Memory (LMB size 0x%"PRIx64")\n",
- 	       lmb_list->lmbs->lmb_size);
- 
- 	for (lmb = lmb_list->lmbs; lmb; lmb = lmb->next) {
-@@ -808,7 +808,7 @@ int lsslot_chrp_mem(void)
- 	if (lmb_list->drconf_buf) {
- 		print_drconf_mem(lmb_list);
- 	} else {
--		printf("lmb size: 0x%x\n", lmb_list->lmbs->lmb_size);
-+		printf("lmb size: 0x%"PRIx64"\n", lmb_list->lmbs->lmb_size);
- 		printf("%-20s  %-5s  %c  %s\n", "Memory Node", "Name", 'R',
- 		       "Sections");
- 		printf("%-20s  %-5s  %c  %s\n", "-----------", "----", '-',
-diff --git a/src/drmgr/ofdt.h b/src/drmgr/ofdt.h
-index 26c943a..bd90810 100644
---- a/src/drmgr/ofdt.h
-+++ b/src/drmgr/ofdt.h
-@@ -94,7 +94,7 @@ struct dr_node {
- 	union {
- 		struct mem_info {
- 			uint64_t	_address;
--			uint32_t	_lmb_size;
-+			uint64_t	_lmb_size;
- 			uint32_t	_lmb_aa_index;
- 			struct mem_scn	*_mem_scns;
- 			struct of_node	*_of_node;

SOURCES/powerpc-utils-e1f1de-lmb_address_in_hexadecimal.patch

@@ -1,29 +0,0 @@
-commit e1f1deb06d9168a95a381a2236e1d8c693d3d229
-Author: Luciano Chavez <lnx1138@linux.ibm.com>
-Date:   Wed Aug 24 21:17:54 2022 -0500
-
-    lsslot: Explicity declare that lmb_address be displayed in hexadecimal
-    
-    A printf statement used is lsslot.c was specifying the macro PRIu64 to
-    display the lmb_address. Depending on the compilation, this would
-    either display as a hexadecimal or decimal value.
-    
-    This patch replaces PRIu64 with PRIx64 to explicitly declare to print
-    the value as hexadecimal as that was is normally expected of an address.
-    
-    Signed-off-by: Luciano Chavez <lnx1138@linux.ibm.com>
-    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
-
-diff --git a/src/drmgr/lsslot.c b/src/drmgr/lsslot.c
-index 7ea0f8b..87f876e 100644
---- a/src/drmgr/lsslot.c
-+++ b/src/drmgr/lsslot.c
-@@ -756,7 +756,7 @@ int print_drconf_mem(struct lmb_list_head *lmb_list)
- 		printf("%s: %s\n", lmb->drc_name,
- 		       lmb->is_owned ? "" : "Not Owned");
- 
--		printf("    DRC Index: %x        Address: %"PRIu64"\n",
-+		printf("    DRC Index: %x        Address: %"PRIx64"\n",
- 		       lmb->drc_index, lmb->lmb_address);
- 		printf("    Removable: %s             Associativity: ",
- 		       lmb->is_removable ? "Yes" : "No ");

SOURCES/powerpc-utils-f4c2b0-fix_display_of_mode_for_dedicated_donating_partition.patch

@@ -1,93 +0,0 @@
-commit f4c2b0d142f623e7dd28a5d685e446d41be75601
-Author: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
-Date:   Thu Aug 25 12:19:27 2022 +0530
-
-    lparstat: Fix display of mode for dedicated-donating partition
-    
-     From the lparstat man page:
-      mode
-      Indicates whether the partition processor capacity is capped or uncapped
-      allowing it to consume idle cycles from the shared pool. Dedicated LPAR
-      is capped or donating.
-    
-    However, on a dedicated partition, lparstat always displays the mode as
-    'Capped' today. Fix this by using 'DedDonMode' field from lparcfg for
-    determining the cycle donation status of a dedicated partition.
-    
-    On a dedicated-donating partition:
-      $ grep -e shared -e DedDonMode -e capped /proc/powerpc/lparcfg
-      DedDonMode=1
-      capped=1
-      shared_processor_mode=0
-    
-    Before this patch:
-      $ lparstat
-    
-      System Configuration
-      type=Dedicated mode=Capped smt=8 lcpu=1 mem=3335424 kB cpus=0 ent=1.00
-    
-    After this patch:
-      $ lparstat
-    
-      System Configuration
-      type=Dedicated mode=Donating smt=8 lcpu=1 mem=3335424 kB cpus=0 ent=1.00
-    
-    Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
-    Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
-    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
-
-diff --git a/src/lparstat.c b/src/lparstat.c
-index 0b30fc9..e998e8c 100644
---- a/src/lparstat.c
-+++ b/src/lparstat.c
-@@ -718,6 +718,16 @@ void get_capped_mode(struct sysentry *se, char *buf)
- 	sprintf(buf, "%s", value);
- }
- 
-+void get_dedicated_mode(struct sysentry *se, char *buf)
-+{
-+	const char *value = "Capped";
-+
-+	if (se->value[0] == '1')
-+		value = "Donating";
-+
-+	sprintf(buf, "%s", value);
-+}
-+
- void get_percent_entry(struct sysentry *se, char *buf)
- {
- 	float value;
-@@ -1057,7 +1067,10 @@ void print_system_configuration(void)
- 	get_sysdata("shared_processor_mode", &descr, value);
- 	offset = sprintf(buf, "type=%s ", value);
- 	sprintf(type, "%s", value);
--	get_sysdata("capped", &descr, value);
-+	if (!strcmp(value, "Dedicated"))
-+		get_sysdata("DedDonMode", &descr, value);
-+	else
-+		get_sysdata("capped", &descr, value);
- 	offset += sprintf(buf + offset, "mode=%s ", value);
- 	get_sysdata("smt_state", &descr, value);
- 	offset += sprintf(buf + offset, "smt=%s ", value);
-diff --git a/src/lparstat.h b/src/lparstat.h
-index 26ed4ba..b7c88e9 100644
---- a/src/lparstat.h
-+++ b/src/lparstat.h
-@@ -47,6 +47,7 @@ typedef struct cpu_sysfs_file_desc cpu_sysfs_fd;
- 
- extern void get_smt_state(struct sysentry *, char *);
- extern void get_capped_mode(struct sysentry *, char *);
-+extern void get_dedicated_mode(struct sysentry *, char *);
- extern void get_memory_mode(struct sysentry *, char *);
- extern void get_percent_entry(struct sysentry *, char *);
- extern void get_phys_cpu_percentage(struct sysentry *, char *);
-@@ -110,7 +111,8 @@ struct sysentry system_data[] = {
- 	{.name = "DesVarCapWt",
- 	 .descr = "Desired Variable Capacity Weight"},
- 	{.name = "DedDonMode",
--	 .descr = "Dedicated Donation Mode"},
-+	 .descr = "Dedicated Donation Mode",
-+	 .get = &get_dedicated_mode},
- 	{.name = "partition_entitled_capacity",
- 	 .descr = "Partition Entitled Capacity"},
- 	{.name = "system_active_processors",

SOURCES/powerpc-utils-fix_setting_primary_slave_across_reboots.patch

@@ -1,27 +0,0 @@
-commit acaf9c45a340f9bb49d6b21ba7ad60c21326ea73
-Author: Mingming Cao <mmc@linux.vnet.ibm.com>
-Date:   Mon Nov 7 14:39:02 2022 -0800
-
-    hcnmgr: Fix setting primary slave across reboots
-    
-    Using nmcli to set bonding of primary slave so that is set correctly
-    across reboots.
-    
-    Signed-off-by: Mingming Cao <mmc@linux.vnet.ibm.com>
-    [tyreld: Reworded commit log]
-    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
-
-diff --git a/scripts/hcnmgr b/scripts/hcnmgr
-index 6946ff9..b5a6bfb 100644
---- a/scripts/hcnmgr
-+++ b/scripts/hcnmgr
-@@ -375,7 +375,8 @@ do_config_vdevice_nm() {
- 	# if the device is primary, and link is up, force it as primary se
- 	if [[ $MODE == "primary" ]]; then
- 		hcnlog INFO "Change bonding primary slave to $DEVNAME"
--		echo "$DEVNAME" >"$BOND_PATH"/primary
-+		nmcli con mod id "$BONDNAME" +bond.options "primary=$DEVNAME"
-+		nmcli con up "$BONDNAME"
- 	fi
- 
- 	hcnlog DEBUG "do_config_vdevice: exit"

SOURCES/powerpc-utils-manpage-lparstat.patch

@@ -0,0 +1,40 @@
+lparstat -E option reports the actual and normalized system utilization
+based on the PURR/SPURR registers. Update the lparstat man page too with
+the -E option details.
+
+Reported-by: Pavithra Prakash <pavr...@in.ibm.com>
+Signed-off-by: Kamalesh Babulal <kama...@linux.vnet.ibm.com>
+---
+Applies on top of next branch.
+
+ man/lparstat.8 | 11 +++++++++++
+ 1 file changed, 11 insertions(+)
+
+diff --git a/man/lparstat.8 b/man/lparstat.8
+index 0f4c923aaef5..d00e42600165 100644
+--- a/man/lparstat.8
++++ b/man/lparstat.8
+@@ -209,6 +209,17 @@ The variable memory capacity weight of the LPAR.
+ .TP
+ .SH
+ .TP
++\fB\-E\fR
++Display Scaled Processor Utilization Resource Register(SPURR) based CPU utilization.
++.RS
++.RS
++Actual CPU utilization is based on Processor Utilization Resource Register(PURR).
++.RS
++.RE
++Normalized CPU utilization is based on Scaled Processor Utilization Resource Register(SPURR).
++.TP
++.SH
++.TP
+ \fB\-l, --legacy\fR
+ Display the report in legacy format.
+ .RS
+
+base-commit: 60d9f54b13b75feee3fd7b25a92b24d0d97ea984
+--
+2.26.2
+
+

SPECS/powerpc-utils.spec

@@ -1,27 +1,13 @@
 Name: powerpc-utils
-Version: 1.3.10
+Version: 1.3.8
-Release: 6%{?dist}
+Release: 5%{?dist}
 Summary: PERL-based scripts for maintaining and servicing PowerPC systems
 
 Group: System Environment/Base
 License: GPLv2
 URL: https://github.com/ibm-power-utilities/powerpc-utils
 Source0: https://github.com/ibm-power-utilities/%{name}/archive/v%{version}/%{name}-%{version}.tar.gz
-Source1: nx-gzip.udev
+Source1: nvsetenv
-Patch0: powerpc-utils-1.3.10-manpages.patch
-Patch1: powerpc-utils-1.3.10-distro.patch
-# bz#2121470, Fix lsslot -c mem output when using 4GB LMB size
-Patch3: powerpc-utils-b1b9e7-LMB_size_4GB.patch
-Patch4: powerpc-utils-e1f1de-lmb_address_in_hexadecimal.patch
-Patch5: powerpc-utils-fix_setting_primary_slave_across_reboots.patch
-Patch6: powerpc-utils-f4c2b0-fix_display_of_mode_for_dedicated_donating_partition.patch
-
-# lparstat: Fix-negative-values-seen-while-running-lpar
-Patch10: powerpc-utils-1.3.10-lparstat-Fix-negative-values-seen-while-running-lpar.patch
-# report-mixed-SMT-state
-Patch11: powerpc-utils-1.3.10-lparstat-report-mixed-SMT-state.patch
-# Fix-offline-threads-uninitialized-entries
-Patch12: powerpc-utils-1.3.10-lparstat-Fix-offline-threads-uninitialized-entries.patch
 
 ExclusiveArch: ppc %{power64}
 
@@ -34,12 +20,25 @@ BuildRequires: librtas-devel >= 1.4.0
 BuildRequires: libservicelog-devel >= 1.0.1-2
 BuildRequires: perl-generators
 BuildRequires: systemd
-BuildRequires: numactl-devel
 
 # rtas_dump explicit dependency
 Requires: perl(Data::Dumper)
 Requires: %{name}-core = %{version}-%{release}
 
+Patch1: powerpc-utils-1.3.8-man.patch
+Patch2: powerpc-utils-1.3.8-makefile.patch
+Patch3: powerpc-utils-1.3.5-pseries_platform-man.patch
+Patch4: powerpc-utils-1.3.5-update_flash_nv.patch
+Patch5: powerpc-utils-1.3.8-install-man.patch
+Patch6: powerpc-utils-manpage-lparstat.patch
+Patch7: powerpc-utils-1.3.8-hcnmgr.patch
+Patch8: 0001-ofpathname-Use-NVMe-controller-physical-nsid.patch
+Patch9: 0002-sys_ident--skip-length-field-from-search.patch
+Patch10: powerpc-utils-1.3.8-f1ec5f04fdac3e87c3c85c2d85f79339d916e864.patch
+Patch11: powerpc-utils-1.3.8-4b2d10942e2d964ecc1fe58c9460c34993ff10be.patch
+Patch12: powerpc-utils-1.3.8-e51995667279164a6c8ce4c3ba0217fffda22d6d.patch
+Patch13: powerpc-utils-1.3.8-fix_boot-time_bonding_interface_cleanup_and_avoid_use_ifcfg.patch
+
 %description
 PERL-based scripts for maintaining and servicing PowerPC systems.
 
@@ -51,13 +50,20 @@ Requires(preun): systemd
 Requires(postun): systemd
 Requires: kmod
 Requires: which
-Requires: gawk
+Requires: /usr/bin/awk
-Requires: bc
+Requires: /usr/bin/basename
-Requires: findutils
+Requires: /usr/bin/bc
-Requires: grep
+Requires: /usr/bin/cat
-Requires: sed
+Requires: /usr/bin/cut
-Requires: systemd-udev
+Requires: /usr/bin/echo
-Requires: coreutils
+Requires: /usr/bin/find
+Requires: /bin/grep
+Requires: /usr/bin/head
+Requires: /usr/bin/ls
+Requires: /usr/bin/sed
+Requires: /usr/bin/tr
+Requires: /usr/bin/udevadm
+
 
 %description core
 Core utilities for maintaining and servicing PowerPC systems.
@@ -76,6 +82,7 @@ make %{?_smp_mflags}
 
 %install
 make install DESTDIR=$RPM_BUILD_ROOT FILES= RCSCRIPTS=
+install -p -m 755 %{SOURCE1} $RPM_BUILD_ROOT%{_sbindir}/nvsetenv
 
 #define pkgdocdir {_datadir}/doc/{name}-{version}
 %{!?_pkgdocdir: %global _pkgdocdir %{_docdir}/%{name}-%{version}}
@@ -86,9 +93,6 @@ install $RPM_BUILD_ROOT/usr/share/doc/packages/powerpc-utils/* -t $RPM_BUILD_ROO
 rm -rf $RPM_BUILD_ROOT/usr/share/doc/packages/powerpc-utils
 rm -f $RPM_BUILD_ROOT%{_pkgdocdir}/COPYING
 
-# install udev rule for the nx-gzip accelerator
-install -pDm 644 %{SOURCE1} %{buildroot}%{_udevrulesdir}/90-nx-gzip.rules
-
 # remove init script and perl script. They are deprecated
 rm -rf $RPM_BUILD_ROOT/etc/init.d/ibmvscsis.sh $RPM_BUILD_ROOT/usr/sbin/vscsisadmin
 
@@ -103,20 +107,26 @@ ln -s serv_config.8 %{buildroot}%{_mandir}/man8/uspchrp.8
 rm -f $RPM_BUILD_ROOT%{_sbindir}/snap $RPM_BUILD_ROOT%{_mandir}/man8/snap.8*
 
 %post core
-%systemd_post hcn-init.service
+systemctl daemon-reload >/dev/null 2>&1 || :
+systemctl start hcn-init.service >/dev/null 2>&1 || :
+systemctl enable hcn-init.service >/dev/null 2>&1 || :
 # update the smt.state file with current SMT
 /usr/sbin/smtstate --save >/dev/null 2>&1 || :
 
+
 %preun core
-%systemd_preun smtstate.service
+svc=$(systemctl list-units -la | grep -Fq smtstate.service; echo $?)
-%systemd_preun hcn-init.service
+if [ "$svc" = "0" ]; then
+    systemctl stop smtstate.service >/dev/null 2>&1 || :
+    systemctl disable smtstate.service >/dev/null 2>&1 || :
+fi
+if systemctl is-enabled hcn-init.service |grep -q "enabled"; then
+    systemctl stop hcn-init.service >/dev/null 2>&1 || :
+    systemctl disable hcn-init.service >/dev/null 2>&1 || :
+fi
 
 %postun core
-%systemd_postun_with_restart smtstate.service
+systemctl daemon-reload >/dev/null 2>&1 || :
-%systemd_postun_with_restart hcn-init.service
-
-%posttrans core
-systemctl enable hcn-init.service >/dev/null 2>&1 || :
 
 %files
 # PERL-based scripts for maintaining and servicing PowerPC systems
@@ -128,8 +138,8 @@ systemctl enable hcn-init.service >/dev/null 2>&1 || :
 
 %files core
 %license COPYING
-%dir %{_localstatedir}/lib/powerpc-utils
+%dir /var/lib/powerpc-utils
-%config(noreplace) %{_localstatedir}/lib/powerpc-utils/smt.state
+/var/lib/powerpc-utils/smt.state
 %{_unitdir}/smtstate.service
 %{_unitdir}/smt_off.service
 %{_unitdir}/hcn-init.service
@@ -168,8 +178,6 @@ systemctl enable hcn-init.service >/dev/null 2>&1 || :
 %{_sbindir}/ofpathname
 %{_sbindir}/pseries_platform
 %{_sbindir}/drmgr
-%{_sbindir}/lparnumascore
-%{_udevrulesdir}/90-nx-gzip.rules
 %{_mandir}/man1/amsstat.1*
 %{_mandir}/man5/lparcfg.5*
 %{_mandir}/man8/activate_firmware.8*
@@ -201,57 +209,8 @@ systemctl enable hcn-init.service >/dev/null 2>&1 || :
 %{_mandir}/man8/nvram.8*
 %{_mandir}/man8/ofpathname.8*
 %{_mandir}/man8/drmgr.8*
-%{_mandir}/man8/lparnumascore.8*
 
 %changelog
-* Wed Jul 26 2023 Than Ngo <than@redhat.com> - 1.3.10-6
-- Fix negative values seen while running lpar
-- Fix lparstat error with mixed SMT state
-Resolves: #2225135
-
-* Sat Jun 17 2023 Than Ngo <than@redhat.com> - 1.3.10-5
-- Resolves: #2207649, Add udev rule for the nx-gzip in to the core subpackage
-
-* Tue Apr 25 2023 Than Ngo <than@redhat.com> - 1.3.10-4
-- Resolves: #2166871, lparstat showing incorrect mode in a dedicated-donating LPAR
-
-* Mon Nov 28 2022 Than Ngo <than@redhat.com> - 1.3.10-3
-- Resolves: #2148878, HNV bond fails to come up with sriov interface as active slave
-
-* Fri Oct 21 2022 Than Ngo <than@redhat.com> - 1.3.10-2
-- Resolves: #2121481, Fix lsslot -c mem output when using 4GB LMB size
-
-* Mon Jun 06 2022 Than Ngo <than@redhat.com> - 1.3.10-1
-- Resolves: #2051330, Linux Hybrid Network Virtualization update
-- Resolves: #2083469, smtstate --save command failed 
-
-* Fri May 13 2022 Than Ngo <than@redhat.com> - 1.3.9-3
-- Resolves: #2059459, add new DRC type description strings for latest PCIe slot types 
-- Resolves: #2078514, Fix NM HNV setting primary slave
-- Resolves: #2083469, smtstate test failed as smtstate --save command failed
-
-* Thu Dec 09 2021 Than Ngo <than@redhat.com> - 1.3.9-1
-- Resolves: #2028690, rebase to 1.3.9
-
-* Thu Dec 02 2021 Than Ngo <than@redhat.com> - 1.3.8-10
-- Related: #2022225, increase release
-
-* Thu Nov 11 2021 Than Ngo <than@redhat.com> - 1.3.8-9
-- Resolves: #2022225, enable support vnic as backend for HNV interfaces 
-
-* Thu Oct 07 2021 Than Ngo <than@redhat.com> - 1.3.8-8
-- lsdevinfo: optimize criteria filtering
-
-* Fri Jul 16 2021 Than Ngo <than@redhat.com> - 1.3.8-7
-- Related: #1938420, Fix checking HCNID array size at boot time
-
-* Thu Apr 01 2021 Than Ngo <than@redhat.com> - 1.3.8-6
-- Resolves: #1935658, New lparstat -x option to report the security flavor
-- Resolves: #1953818, Use od instead xxd
-- Resolves: #1938420, rebase patch fix_boot-time_bonding_interface_cleanup_and_avoid_use_ifcfg 
-- Resolves: #1940358, ppc64_cpu --help does not list --version as an option 
-- Resolves: #1951068, take care of NUMA topology when removing memory (DLPAR)
-
 * Wed Feb 03 2021 Than Ngo <than@redhat.com> - 1.3.8-5
 - Resolves: #1924150, Fix boot-time bonding interface cleanup and avoid use ifcfg