.gitignore

@@ -1 +1,27 @@
-SOURCES/powerpc-utils-1.3.10.tar.gz
+powerpc-utils-1.2.2.tar.gz
+/powerpc-utils-1.2.6.tar.gz
+/powerpc-utils-1.2.10.tar.gz
+/powerpc-utils-1.2.11.tar.gz
+/powerpc-utils-1.2.12.tar.gz
+/powerpc-utils-1.2.14.tar.gz
+/powerpc-utils-1.2.15.tar.gz
+/powerpc-utils-1.2.16.tar.gz
+/powerpc-utils-1.2.17.tar.gz
+/powerpc-utils-1.2.18.tar.gz
+/powerpc-utils-1.2.19.tar.gz
+/powerpc-utils-1.2.20.tar.gz
+/powerpc-utils-1.2.22.tar.gz
+/powerpc-utils-1.2.23.tar.gz
+/powerpc-utils-1.2.24.tar.gz
+/powerpc-utils-1.2.27.tar.gz
+/v1.3.0.tar.gz
+/v1.3.1.tar.gz
+/v1.3.3.tar.gz
+/powerpc-utils-1.3.4.tar.gz
+/powerpc-utils-1.3.5.tar.gz
+/powerpc-utils-1.3.6.tar.gz
+/powerpc-utils-1.3.7.tar.gz
+/powerpc-utils-1.3.8.tar.gz
+/powerpc-utils-1.3.9.tar.gz
+/powerpc-utils-1.3.10.tar.gz
+/powerpc-utils-1.3.13.tar.gz

SOURCES/powerpc-utils-1.3.10-distro.patch

@@ -1,11 +0,0 @@
-diff -up powerpc-utils-1.3.10/Makefile.am.me powerpc-utils-1.3.10/Makefile.am
---- powerpc-utils-1.3.10/Makefile.am.me	2022-06-03 12:35:01.335312481 +0200
-+++ powerpc-utils-1.3.10/Makefile.am	2022-06-03 14:11:58.453820076 +0200
-@@ -229,7 +229,6 @@ install-data-hook:
- 	$(INSTALL_DATA) systemd/smtstate.service $(DESTDIR)${systemd_unit_dir}/
- 	$(INSTALL_DATA) systemd/hcn-init.service $(DESTDIR)${systemd_unit_dir}/
- 	$(INSTALL_DATA) var/lib/powerpc-utils/smt.state $(DESTDIR)/var/lib/@PACKAGE@/
--	$(INSTALL_SCRIPT) scripts/functions.suse $(DESTDIR)/usr/lib/@PACKAGE@/
- 	$(INSTALL_SCRIPT) scripts/smtstate $(DESTDIR)@sbindir@
- 	sed -i -e 's,$${exec_prefix},@prefix@,g' $(DESTDIR)${systemd_unit_dir}/smt_off.service
- 	sed -i -e 's,$${exec_prefix},@prefix@,g' $(DESTDIR)${systemd_unit_dir}/smtstate.service

SOURCES/powerpc-utils-1.3.10-lparstat-Fix-negative-values-seen-while-running-lpar.patch

@@ -1,84 +0,0 @@
-commit 73ba26c1240a25e7699449e82cfc09dad10fed80
-Author: Sathvika Vasireddy <sv@linux.ibm.com>
-Date:   Fri Dec 9 15:26:46 2022 +0530
-
-    lparstat: Fix negative values seen while running lparstat with -E option
-    
-    Negative values are seen while running lparstat with -E option.
-    This is because delta_purr value is less than delta_idle_purr.
-    Given that these values are read from different sources, a
-    small variation in the values is possible. So, in such cases,
-    round down delta_idle_purr to delta_purr.
-    
-    Without this patch:
-    =====
-    System Configuration
-    type=Dedicated mode=Capped smt=8 lcpu=240 mem=67033290112 kB cpus=0
-    ent=240.00
-    
-    ---Actual---                 -Normalized-
-    %busy  %idle   Frequency     %busy  %idle
-    ------ ------  ------------- ------ ------
-     -0.03 100.02  3.93GHz[111%]   0.01 110.97
-      0.00 100.00  3.93GHz[111%]   0.01 110.99
-     -0.04 100.03  3.93GHz[111%]   0.01 110.98
-      0.06  99.95  3.93GHz[111%]   0.01 110.99
-      0.02  99.98  3.93GHz[111%]   0.01 110.99
-    =====
-    
-    With this patch:
-    =====
-    System Configuration
-    type=Dedicated mode=Capped smt=8 lcpu=240 mem=67033290112 kB cpus=0
-    ent=240.00
-    
-    ---Actual---                 -Normalized-
-    %busy  %idle   Frequency     %busy  %idle
-    ------ ------  ------------- ------ ------
-      0.03  99.96  3.93GHz[111%]   0.01 110.98
-      0.00 100.00  3.93GHz[111%]   0.01 110.99
-      0.03  99.97  3.93GHz[111%]   0.01 110.99
-      0.00 100.00  3.93GHz[111%]   0.01 110.99
-      0.09  99.90  3.93GHz[111%]   0.01 110.99
-    =====
-    
-    Reported-by: Shirisha Ganta <shirisha.ganta1@ibm.com>
-    Signed-off-by: Sathvika Vasireddy <sv@linux.ibm.com>
-    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
-
-diff --git a/src/lparstat.c b/src/lparstat.c
-index 31a4ee8..eebba1f 100644
---- a/src/lparstat.c
-+++ b/src/lparstat.c
-@@ -492,6 +492,15 @@ void get_cpu_util_purr(struct sysentry *unused_se, char *buf)
- 	delta_purr = get_delta_value("purr");
- 	delta_idle_purr = get_delta_value("idle_purr");
- 
-+	/*
-+	 * Given that these values are read from different
-+	 * sources (purr from lparcfg and idle_purr from sysfs),
-+	 * a small variation in the values is possible.
-+	 * In such cases, round down delta_idle_purr to delta_purr.
-+	 */
-+	if (delta_idle_purr > delta_purr)
-+		delta_idle_purr = delta_purr;
-+
- 	physc = (delta_purr - delta_idle_purr) / delta_tb;
- 	physc *= 100.00;
- 
-@@ -507,6 +516,15 @@ void get_cpu_idle_purr(struct sysentry *unused_se, char *buf)
- 	delta_purr = get_delta_value("purr");
- 	delta_idle_purr = get_delta_value("idle_purr");
- 
-+	/*
-+	 * Given that these values are read from different
-+	 * sources (purr from lparcfg and idle_purr from sysfs),
-+	 * a small variation in the values is possible.
-+	 * In such cases, round down delta_idle_purr to delta_purr.
-+	 */
-+	if (delta_idle_purr > delta_purr)
-+		delta_idle_purr = delta_purr;
-+
- 	physc = (delta_purr - delta_idle_purr) / delta_tb;
- 	idle = (delta_purr / delta_tb) - physc;
- 	idle *= 100.00;

SOURCES/powerpc-utils-1.3.10-lparstat-Fix-offline-threads-uninitialized-entries.patch

@@ -1,46 +0,0 @@
-commit dee15756bcb287ccf39a904be07c90107b13844b
-Author: Laurent Dufour <ldufour@linux.ibm.com>
-Date:   Wed May 3 10:50:15 2023 +0200
-
-    lparstat: Fix offline threads uninitialized entries
-    
-    When some threads are offline, lparstat -E is failing like that:
-    
-    $ ppc64_cpu --info # CPU 20 is offline
-    Core   0:    0*    1*    2*    3*    4*    5*    6*    7*
-    Core   1:    8*    9*   10*   11*   12*   13*   14*   15*
-    Core   2:   16*   17*   18*   19*   20    21*   22*   23*
-    Core   3:   24*   25*   26*   27*   28*   29*   30*   31*
-    Core   4:   32*   33*   34*   35*   36*   37*   38*   39*
-    Core   5:   40*   41*   42*   43*   44*   45*   46*   47*
-    $ lparstat -E
-    Failed to read /sys/devices/system/cpu/cpu0/spurr
-    
-    The message is complaining about CPU0 but the real issue is that in
-    parse_sysfs_values() the test cpu_sysfs_fds[i].spurr >= 0 is valid even if
-    the entry has not been initialized (cpu_sysfs_fds is alloc cleared). So
-    if the number of threads online seen in assign_cpu_sysfs_fds is lower than
-    threads_in_system, the loop in parse_sysfs_values() will read uninitialized
-    entry, where .cpu=0.
-    
-    To prevent that, unset entries in the cpu_sysfs_fds should have the spurr
-    fd set to -1.
-    
-    Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
-    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
-
-diff --git a/src/lparstat.c b/src/lparstat.c
-index a9e7bce..d2fdb3f 100644
---- a/src/lparstat.c
-+++ b/src/lparstat.c
-@@ -163,6 +163,10 @@ static int assign_cpu_sysfs_fds(int threads_in_system)
- 		cpu_idx++;
- 	}
- 
-+	/* Mark extra slots for offline threads unset, see parse_sysfs_values */
-+	for (; cpu_idx < threads_in_system; cpu_idx++)
-+		cpu_sysfs_fds[cpu_idx].spurr = -1;
-+
- 	return 0;
- error:
- 	fprintf(stderr, "Failed to open %s: %s\n",

SOURCES/powerpc-utils-1.3.10-lparstat-report-mixed-SMT-state.patch

@@ -1,93 +0,0 @@
-commit b2672fa3d462217ccd057a2cd307af2448e78757
-Author: Laurent Dufour <ldufour@linux.ibm.com>
-Date:   Wed May 3 10:50:14 2023 +0200
-
-    lparstat: report mixed SMT state
-    
-    when SMT state is mixed like this one (CPU 4 is offline):
-    
-    $ ppc64_cpu --info
-    Core   0:    0*    1*    2*    3*    4     5*    6*    7*
-    Core   1:    8*    9*   10*   11*   12*   13*   14*   15*
-    Core   2:   16*   17*   18*   19*   20*   21*   22*   23*
-    Core   3:   24*   25*   26*   27*   28*   29*   30*   31*
-    Core   4:   32*   33*   34*   35*   36*   37*   38*   39*
-    Core   5:   40*   41*   42*   43*   44*   45*   46*   47*
-    $ ppc64_cpu --smt
-    SMT=7: 0
-    SMT=8: 1-5
-    
-    ppc64_cpu --smt is handling that nicely but lparstat failed reporting the
-    SMT state:
-    $ /usr/sbin/lparstat
-    Failed to get smt state
-    
-    System Configuration
-    type=Dedicated mode=Capped smt=Capped lcpu=6 mem=65969728 kB cpus=0 ent=6.00
-    
-    %user  %sys %wait    %idle    physc %entc lbusy   app  vcsw phint
-    ----- ----- -----    -----    ----- ----- ----- ----- ----- -----
-     0.02  0.01  0.00    99.97     3.41 56.83  0.02  0.00 4061778   156
-    
-    Makes lparstat reporting "smt=mixed" in that case.
-    __do_smt is now returning 0 when the SMT state is mixed instead of -1 which
-    is also reported when an error is detected.
-    This doesn't change the call made by ppc64_cpu which is using
-    print_smt_state=true and so is expecting a returned value equal to 0 or -1.
-    
-    With that patch applied, lparstat print that in the above case:
-    $lparstat
-    
-    System Configuration
-    type=Dedicated mode=Capped smt=Mixed lcpu=6 mem=65969728 kB cpus=0 ent=6.00
-    
-    %user  %sys %wait    %idle    physc %entc lbusy   app  vcsw phint
-    ----- ----- -----    -----    ----- ----- ----- ----- ----- -----
-     0.01  0.01  0.00    99.97     3.43 57.17  0.02  0.00 4105654   156
-    
-    Signed-off-by: Laurent Dufour <ldufour@linux.ibm.com>
-    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
-
-diff --git a/src/common/cpu_info_helpers.c b/src/common/cpu_info_helpers.c
-index 925f220..c05d96d 100644
---- a/src/common/cpu_info_helpers.c
-+++ b/src/common/cpu_info_helpers.c
-@@ -245,7 +245,7 @@ int __do_smt(bool numeric, int cpus_in_system, int threads_per_cpu,
- 			if (smt_state == 0)
- 				smt_state = thread + 1;
- 			else if (smt_state > 0)
--				smt_state = -1; /* mix of SMT modes */
-+				smt_state = 0; /* mix of SMT modes */
- 		}
- 	}
- 
-@@ -257,7 +257,7 @@ int __do_smt(bool numeric, int cpus_in_system, int threads_per_cpu,
- 			printf("SMT=1\n");
- 		else
- 			printf("SMT is off\n");
--	} else if (smt_state == -1) {
-+	} else if (smt_state == 0) {
- 		for (thread = 0; thread < threads_per_cpu; thread++) {
- 			if (CPU_COUNT_S(cpu_state_size,
- 						cpu_states[thread])) {
-diff --git a/src/lparstat.c b/src/lparstat.c
-index eebba1f..a9e7bce 100644
---- a/src/lparstat.c
-+++ b/src/lparstat.c
-@@ -884,13 +884,15 @@ void get_smt_mode(struct sysentry *se, char *buf)
- 	}
- 
- 	smt_state = parse_smt_state();
--	if (smt_state < 0) {
-+	if (smt_state == -1) {
- 		fprintf(stderr, "Failed to get smt state\n");
- 		return;
- 	}
- 
- 	if (smt_state == 1)
- 		sprintf(buf, "Off");
-+	else if (smt_state == 0)
-+		sprintf(buf, "Mixed");
- 	else
- 		sprintf(buf, "%d", smt_state);
- }

SOURCES/powerpc-utils-b1b9e7-LMB_size_4GB.patch

@@ -1,98 +0,0 @@
-commit b1b9e76de0f3ab1dfcd9426779fa20fd77cd5625
-Author: Luciano Chavez <lnx1138@linux.ibm.com>
-Date:   Wed Aug 24 21:11:32 2022 -0500
-
-    lsslot: Fix lsslot -c mem output when using 4GB LMB size
-    
-    When using a LMB size of 4GB, the output of lsslot -c mem would get
-    reported incorrectly as:
-    
-    Dynamic Reconfiguration Memory (LMB size 0x0)
-    :
-        DRC Index: 80000001        Address: 100000000
-        Removable: No              Associativity: (index: 1) 0 1 4 9
-        Section(s):
-    
-    This patch changes the declaration of the _node_u._smem._lmb_size from
-    a uint32_t to uint64_t to store the value properly. Any variables that
-    store the lmb_size are also declared as uint64_t. In addition, we
-    use the PRIx64 macro in printf statements to properly print the
-    lmb_size value.
-    
-    The patch also includes a necessary change to declare the global
-    variable block_sz_bytes as a uint64_t to fix an infinite loop in
-    the function get_mem_scns() when the above changes were introduced.
-    
-    Signed-off-by: Luciano Chavez <lnx1138@linux.ibm.com>
-    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
-
-diff --git a/src/drmgr/drmem.h b/src/drmgr/drmem.h
-index db5a47f..48108c5 100644
---- a/src/drmgr/drmem.h
-+++ b/src/drmgr/drmem.h
-@@ -58,7 +58,7 @@ struct drconf_mem_v2 {
- #define LMB_REVERSE_SORT	1
- #define LMB_RANDOM_SORT		2
- 
--extern int block_sz_bytes;
-+extern uint64_t block_sz_bytes;
- 
- struct lmb_list_head *get_lmbs(unsigned int);
- void free_lmbs(struct lmb_list_head *);
-diff --git a/src/drmgr/drslot_chrp_mem.c b/src/drmgr/drslot_chrp_mem.c
-index 3b78723..d37ee80 100644
---- a/src/drmgr/drslot_chrp_mem.c
-+++ b/src/drmgr/drslot_chrp_mem.c
-@@ -33,7 +33,7 @@
- #include "drmem.h"
- #include "common_numa.h"
- 
--int block_sz_bytes = 0;
-+uint64_t block_sz_bytes = 0;
- static char *state_strs[] = {"offline", "online"};
- 
- static char *usagestr = "-c mem {-a | -r} {-q <quantity> -p {variable_weight | ent_capacity} | {-q <quantity> | -s [<drc_name> | <drc_index>]}}";
-@@ -118,7 +118,7 @@ free_lmbs(struct lmb_list_head *lmb_list)
- static int
- get_mem_scns(struct dr_node *lmb)
- {
--	uint32_t lmb_sz = lmb->lmb_size;
-+	uint64_t lmb_sz = lmb->lmb_size;
- 	uint64_t phys_addr = lmb->lmb_address;
- 	uint32_t mem_scn;
- 	int rc = 0;
-diff --git a/src/drmgr/lsslot.c b/src/drmgr/lsslot.c
-index 87f876e..83e9e85 100644
---- a/src/drmgr/lsslot.c
-+++ b/src/drmgr/lsslot.c
-@@ -741,7 +741,7 @@ int print_drconf_mem(struct lmb_list_head *lmb_list)
- 	if (usr_drc_name)
- 		drc_index = strtol(usr_drc_name, NULL, 0);
- 
--	printf("Dynamic Reconfiguration Memory (LMB size 0x%x)\n",
-+	printf("Dynamic Reconfiguration Memory (LMB size 0x%"PRIx64")\n",
- 	       lmb_list->lmbs->lmb_size);
- 
- 	for (lmb = lmb_list->lmbs; lmb; lmb = lmb->next) {
-@@ -808,7 +808,7 @@ int lsslot_chrp_mem(void)
- 	if (lmb_list->drconf_buf) {
- 		print_drconf_mem(lmb_list);
- 	} else {
--		printf("lmb size: 0x%x\n", lmb_list->lmbs->lmb_size);
-+		printf("lmb size: 0x%"PRIx64"\n", lmb_list->lmbs->lmb_size);
- 		printf("%-20s  %-5s  %c  %s\n", "Memory Node", "Name", 'R',
- 		       "Sections");
- 		printf("%-20s  %-5s  %c  %s\n", "-----------", "----", '-',
-diff --git a/src/drmgr/ofdt.h b/src/drmgr/ofdt.h
-index 26c943a..bd90810 100644
---- a/src/drmgr/ofdt.h
-+++ b/src/drmgr/ofdt.h
-@@ -94,7 +94,7 @@ struct dr_node {
- 	union {
- 		struct mem_info {
- 			uint64_t	_address;
--			uint32_t	_lmb_size;
-+			uint64_t	_lmb_size;
- 			uint32_t	_lmb_aa_index;
- 			struct mem_scn	*_mem_scns;
- 			struct of_node	*_of_node;

SOURCES/powerpc-utils-e1f1de-lmb_address_in_hexadecimal.patch

@@ -1,29 +0,0 @@
-commit e1f1deb06d9168a95a381a2236e1d8c693d3d229
-Author: Luciano Chavez <lnx1138@linux.ibm.com>
-Date:   Wed Aug 24 21:17:54 2022 -0500
-
-    lsslot: Explicity declare that lmb_address be displayed in hexadecimal
-    
-    A printf statement used is lsslot.c was specifying the macro PRIu64 to
-    display the lmb_address. Depending on the compilation, this would
-    either display as a hexadecimal or decimal value.
-    
-    This patch replaces PRIu64 with PRIx64 to explicitly declare to print
-    the value as hexadecimal as that was is normally expected of an address.
-    
-    Signed-off-by: Luciano Chavez <lnx1138@linux.ibm.com>
-    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
-
-diff --git a/src/drmgr/lsslot.c b/src/drmgr/lsslot.c
-index 7ea0f8b..87f876e 100644
---- a/src/drmgr/lsslot.c
-+++ b/src/drmgr/lsslot.c
-@@ -756,7 +756,7 @@ int print_drconf_mem(struct lmb_list_head *lmb_list)
- 		printf("%s: %s\n", lmb->drc_name,
- 		       lmb->is_owned ? "" : "Not Owned");
- 
--		printf("    DRC Index: %x        Address: %"PRIu64"\n",
-+		printf("    DRC Index: %x        Address: %"PRIx64"\n",
- 		       lmb->drc_index, lmb->lmb_address);
- 		printf("    Removable: %s             Associativity: ",
- 		       lmb->is_removable ? "Yes" : "No ");

SOURCES/powerpc-utils-f4c2b0-fix_display_of_mode_for_dedicated_donating_partition.patch

@@ -1,93 +0,0 @@
-commit f4c2b0d142f623e7dd28a5d685e446d41be75601
-Author: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
-Date:   Thu Aug 25 12:19:27 2022 +0530
-
-    lparstat: Fix display of mode for dedicated-donating partition
-    
-     From the lparstat man page:
-      mode
-      Indicates whether the partition processor capacity is capped or uncapped
-      allowing it to consume idle cycles from the shared pool. Dedicated LPAR
-      is capped or donating.
-    
-    However, on a dedicated partition, lparstat always displays the mode as
-    'Capped' today. Fix this by using 'DedDonMode' field from lparcfg for
-    determining the cycle donation status of a dedicated partition.
-    
-    On a dedicated-donating partition:
-      $ grep -e shared -e DedDonMode -e capped /proc/powerpc/lparcfg
-      DedDonMode=1
-      capped=1
-      shared_processor_mode=0
-    
-    Before this patch:
-      $ lparstat
-    
-      System Configuration
-      type=Dedicated mode=Capped smt=8 lcpu=1 mem=3335424 kB cpus=0 ent=1.00
-    
-    After this patch:
-      $ lparstat
-    
-      System Configuration
-      type=Dedicated mode=Donating smt=8 lcpu=1 mem=3335424 kB cpus=0 ent=1.00
-    
-    Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
-    Reviewed-by: Nathan Lynch <nathanl@linux.ibm.com>
-    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
-
-diff --git a/src/lparstat.c b/src/lparstat.c
-index 0b30fc9..e998e8c 100644
---- a/src/lparstat.c
-+++ b/src/lparstat.c
-@@ -718,6 +718,16 @@ void get_capped_mode(struct sysentry *se, char *buf)
- 	sprintf(buf, "%s", value);
- }
- 
-+void get_dedicated_mode(struct sysentry *se, char *buf)
-+{
-+	const char *value = "Capped";
-+
-+	if (se->value[0] == '1')
-+		value = "Donating";
-+
-+	sprintf(buf, "%s", value);
-+}
-+
- void get_percent_entry(struct sysentry *se, char *buf)
- {
- 	float value;
-@@ -1057,7 +1067,10 @@ void print_system_configuration(void)
- 	get_sysdata("shared_processor_mode", &descr, value);
- 	offset = sprintf(buf, "type=%s ", value);
- 	sprintf(type, "%s", value);
--	get_sysdata("capped", &descr, value);
-+	if (!strcmp(value, "Dedicated"))
-+		get_sysdata("DedDonMode", &descr, value);
-+	else
-+		get_sysdata("capped", &descr, value);
- 	offset += sprintf(buf + offset, "mode=%s ", value);
- 	get_sysdata("smt_state", &descr, value);
- 	offset += sprintf(buf + offset, "smt=%s ", value);
-diff --git a/src/lparstat.h b/src/lparstat.h
-index 26ed4ba..b7c88e9 100644
---- a/src/lparstat.h
-+++ b/src/lparstat.h
-@@ -47,6 +47,7 @@ typedef struct cpu_sysfs_file_desc cpu_sysfs_fd;
- 
- extern void get_smt_state(struct sysentry *, char *);
- extern void get_capped_mode(struct sysentry *, char *);
-+extern void get_dedicated_mode(struct sysentry *, char *);
- extern void get_memory_mode(struct sysentry *, char *);
- extern void get_percent_entry(struct sysentry *, char *);
- extern void get_phys_cpu_percentage(struct sysentry *, char *);
-@@ -110,7 +111,8 @@ struct sysentry system_data[] = {
- 	{.name = "DesVarCapWt",
- 	 .descr = "Desired Variable Capacity Weight"},
- 	{.name = "DedDonMode",
--	 .descr = "Dedicated Donation Mode"},
-+	 .descr = "Dedicated Donation Mode",
-+	 .get = &get_dedicated_mode},
- 	{.name = "partition_entitled_capacity",
- 	 .descr = "Partition Entitled Capacity"},
- 	{.name = "system_active_processors",

SOURCES/powerpc-utils-fix_setting_primary_slave_across_reboots.patch

@@ -1,27 +0,0 @@
-commit acaf9c45a340f9bb49d6b21ba7ad60c21326ea73
-Author: Mingming Cao <mmc@linux.vnet.ibm.com>
-Date:   Mon Nov 7 14:39:02 2022 -0800
-
-    hcnmgr: Fix setting primary slave across reboots
-    
-    Using nmcli to set bonding of primary slave so that is set correctly
-    across reboots.
-    
-    Signed-off-by: Mingming Cao <mmc@linux.vnet.ibm.com>
-    [tyreld: Reworded commit log]
-    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
-
-diff --git a/scripts/hcnmgr b/scripts/hcnmgr
-index 6946ff9..b5a6bfb 100644
---- a/scripts/hcnmgr
-+++ b/scripts/hcnmgr
-@@ -375,7 +375,8 @@ do_config_vdevice_nm() {
- 	# if the device is primary, and link is up, force it as primary se
- 	if [[ $MODE == "primary" ]]; then
- 		hcnlog INFO "Change bonding primary slave to $DEVNAME"
--		echo "$DEVNAME" >"$BOND_PATH"/primary
-+		nmcli con mod id "$BONDNAME" +bond.options "primary=$DEVNAME"
-+		nmcli con up "$BONDNAME"
- 	fi
- 
- 	hcnlog DEBUG "do_config_vdevice: exit"

gating.yaml

@@ -0,0 +1,6 @@
+--- !Policy
+product_versions:
+  - rhel-9
+decision_context: osci_compose_gate
+rules:
+  - !PassingTestCaseRule {test_case_name: baseos-ci.brew-build.tier1.functional}

powerpc-utils-1.3.10-manpages.patch

@@ -1,265 +1,26 @@
-diff -up powerpc-utils-1.3.5/man/pseries_platform.8.me powerpc-utils-1.3.5/man/pseries_platform.8
---- powerpc-utils-1.3.5/man/pseries_platform.8.me	2018-11-29 16:50:07.601034729 +0100
-+++ powerpc-utils-1.3.5/man/pseries_platform.8	2018-11-29 16:50:07.601034729 +0100
-@@ -0,0 +1,11 @@
-+.\"
-+.\" Copyright (C) 2015 International Business Machines
-+.\"
-+.TH pseries_platform 8 "September 2015" Linux "Linux on Power Service Tools"
-+.SH NAME
-+pseries_platform \- identify the platform and display the name of platform
-+.SH SYNOPSIS
-+.B /usr/bin/pseries_platform
-+
-+.SH DESCRIPTION
-+The \fIpseries_platform\fR tool can identify the platform and display the name of platform.
-diff -up powerpc-utils-1.2.15/man/lsdevinfo.8.man powerpc-utils-1.2.15/man/lsdevinfo.8
---- powerpc-utils-1.2.15/man/lsdevinfo.8.man	2013-01-16 15:31:13.886591137 +0100
-+++ powerpc-utils-1.2.15/man/lsdevinfo.8	2013-01-16 15:31:13.886591137 +0100
-@@ -0,0 +1,39 @@
-+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-+.TH LSDEVINFO "8" "October 2010" "Linux" "Linux on Power Service Tools"
-+.SH NAME
-+lsdevinfo - information on Virtual devices
-+
-+.SH SYNOPSIS
-+.B lsdevinfo
-+[\fI-q criteria\fR] [\fI-F format\fR] [\fI-R\fR] [\fI-c\fR] [\fI-h\fR]
-+
-+.SH DESCRIPTION
-+Provide information on Virtual devices
-+.PP
-+
-+.SH OPTIONS
-+.TP
-+\fB\-q\fR criteria
-+Specifies a criteria to select which devices are to be displayed.
-+.TP
-+\fB\-F\fR format
-+Specifies the set of attributes to be displayed.
-+.TP
-+\fB\-R\fR
-+Recursively display children of selected devices
-+.TP
-+\fB\-c\fR
-+Display output as a comma separated list for each device.
-+.TP
-+\fB\-V\fR
-+Display version information and exit
-+.TP
-+\fB\-h\fR
-+Display help information and exit
-+
-+.SH AUTHOR
-+.B lsdevinfo
-+was written by Santiago Leon <sleon@ec.ibm.com>.
-+.PP
-+This manual page was written by Roman Rakus <rrakus@redhat.com>.
-+
-diff -up powerpc-utils-1.2.15/man/lsprop.8.man powerpc-utils-1.2.15/man/lsprop.8
---- powerpc-utils-1.2.15/man/lsprop.8.man	2013-01-16 15:31:13.886591137 +0100
-+++ powerpc-utils-1.2.15/man/lsprop.8	2013-01-16 15:31:13.886591137 +0100
-@@ -0,0 +1,42 @@
-+.TH LSPROP "8" "Sep 2010" "Linux" "Linux on Power Service Tools"
-+.SH NAME
-+lsprop \- list properties
-+.SH SYNOPSIS
-+.B lsprop
-+.RB [ \-R ]
-+.RB [ \-m
-+.IR max-bytes ]
-+.RB [ \-w
-+.IR num-words ]
-+.RI [ FILE .\|.\|.]
-+.SH OVERVIEW
-+.B lsprop
-+program is a member of the ppc64-utils suite of utils.
-+Use it to list properties
-+
-+.SH DESCRIPTION
-+.B lsprop
-+displays properties for
-+.IR FILE s
-+like Open Firmware
-+.I .properties
-+word.
-+If the
-+.I FILE
-+is not set, the current directory is used.
-+
-+.SH OPTIONS
-+.TP
-+.B \-R
-+Process recursively
-+.TP
-+.BI \-m " max-bytes"
-+Read only first
-+.I max-bytes
-+bytes from the
-+.IR FILE s
-+.TP
-+.BI \-w " num-words"
-+Display up to
-+.I num-words
-+words per line
-diff -up powerpc-utils-1.2.15/man/ls-vdev.8.man powerpc-utils-1.2.15/man/ls-vdev.8
---- powerpc-utils-1.2.15/man/ls-vdev.8.man	2013-01-16 15:31:13.886591137 +0100
-+++ powerpc-utils-1.2.15/man/ls-vdev.8	2013-01-16 15:31:13.886591137 +0100
-@@ -0,0 +1,25 @@
-+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-+.TH LS-VDEV "8" "October 2010" "Linux" "Linux on Power Service Tools"
-+.SH NAME
-+ls-vdev \- information on Virtual SCSI adapters and devices
-+.SH SYNOPSIS
-+.BR ls-vdev " [" \-h " | " -V ]
-+
-+.SH DESCRIPTION
-+Provide information on Virtual SCSI adapters and devices
-+.PP
-+
-+.SH OPTIONS
-+.TP
-+\fB\-V\fR
-+Display version information and exit
-+.TP
-+\fB\-h\fR
-+Display help information and exit
-+.PP
-+
-+.SH AUTHOR
-+.B ls-vdev
-+was written by Brian King <brking@linux.vnet.ibm.com>.
-+.PP
-+This manual page was written by Roman Rakus <rrakus@redhat.com>.
-diff -up powerpc-utils-1.2.15/man/ls-veth.8.man powerpc-utils-1.2.15/man/ls-veth.8
---- powerpc-utils-1.2.15/man/ls-veth.8.man	2013-01-16 15:31:13.887591102 +0100
-+++ powerpc-utils-1.2.15/man/ls-veth.8	2013-01-16 15:31:13.887591102 +0100
-@@ -0,0 +1,25 @@
-+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-+.TH LS-VETH "8" "October 2010" "Linux" "Linux on Power Service Tools"
-+.SH NAME
-+ls-veth \- information on Virtual Ethernet devices
-+.SH SYNOPSIS
-+.BR ls-veth " [" \-h " | " -V ]
-+
-+.SH DESCRIPTION
-+Provide information on Virtual Ethernet devices
-+.PP
-+
-+.SH OPTIONS
-+.TP
-+\fB\-V\fR
-+Display version information and exit
-+.TP
-+\fB\-h\fR
-+Display help information and exit
-+.PP
-+
-+.SH AUTHOR
-+.B ls-veth
-+was written by Brian King <brking@linux.vnet.ibm.com>.
-+.PP
-+This manual page was written by Roman Rakus <rrakus@redhat.com>.
-diff -up powerpc-utils-1.2.15/man/ls-vscsi.8.man powerpc-utils-1.2.15/man/ls-vscsi.8
---- powerpc-utils-1.2.15/man/ls-vscsi.8.man	2013-01-16 15:31:13.887591102 +0100
-+++ powerpc-utils-1.2.15/man/ls-vscsi.8	2013-01-16 15:31:13.887591102 +0100
-@@ -0,0 +1,25 @@
-+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-+.TH LS-VSCSI "8" "October 2010" "Linux" "Linux on Power Service Tools"
-+.SH NAME
-+ls-vscsi \- information on Virtual devices
-+.SH SYNOPSIS
-+.BR ls-vscsi " [" \-h " | " -V ]
-+
-+.SH DESCRIPTION
-+Provide information on Virtual devices
-+.PP
-+
-+.SH OPTIONS
-+.TP
-+\fB\-V\fR
-+Display version information and exit
-+.TP
-+\fB\-h\fR
-+Display help information and exit
-+.PP
-+
-+.SH AUTHOR
-+.B ls-vscsi
-+was written by Brian King <brking@linux.vnet.ibm.com>.
-+.PP
-+This manual page was written by Roman Rakus <rrakus@redhat.com>.
-diff -up powerpc-utils-1.2.15/man/nvsetenv.8.man powerpc-utils-1.2.15/man/nvsetenv.8
---- powerpc-utils-1.2.15/man/nvsetenv.8.man	2013-01-16 15:31:13.887591102 +0100
-+++ powerpc-utils-1.2.15/man/nvsetenv.8	2013-01-16 15:31:13.887591102 +0100
-@@ -0,0 +1,29 @@
-+.TH NVSETENV "8" "Oct 2010" "Linux" "Linux on Power Service Tools"
-+.SH NAME
-+nvsetenv \- wrapper to invoke nvram
-+
-+.SH SYNOPSIS
-+.B nvsetenv
-+[ ARG1 ] [ ARG2 ]
-+
-+.SH DESCRIPTION
-+.B nvsetenv
-+is just a wrapper to invoke nvram
-+
-+.SH OPTIONS
-+
-+Without any argument, nvsetenv calls
-+.I nvram --print-config
-+
-+With one argument
-+.IR ARG1 ,
-+nvsetenv calls
-+.I nvram --print-config=ARG1
-+
-+With two arguments
-+.IR "ARG1 ARG2" ,
-+nvsetenv calls
-+.I nvram --update-config ARG1=ARG2
-+
-+.SH "SEE ALSO"
-+.IR nvram (8)
-diff -up powerpc-utils-1.2.15/man/rtas_event_decode.8.man powerpc-utils-1.2.15/man/rtas_event_decode.8
---- powerpc-utils-1.2.15/man/rtas_event_decode.8.man	2013-01-16 15:31:13.888591067 +0100
-+++ powerpc-utils-1.2.15/man/rtas_event_decode.8	2013-01-16 15:31:13.888591067 +0100
-@@ -0,0 +1,31 @@
-+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
-+.TH RTAS_EVENT_DECODE 8 "September 2010" "Linux" "Linux on Power Service Tools"
-+.SH NAME
-+\fBrtas_event_decode\fP - RTAS message decoder
-+.SH SYNOPSIS
-+.B rtas_event_decode
-+[\fI-dv\fR] [\fI-n eventnum\fR] [\fI-w width\fR]
-+.SH DESCRIPTION
-+RTAS messages are placed in the syslog encoded in a binary
-+format, and are unreadable.  This tool will take exactly one
-+message, parse it, and spit out the human-readable equivalent.
-+This program expects ascii data on stdin.
-+
-+This tool is mostly meant to be used in conjuction with the
-+rtas_dump shell script, which provides a suitable user 
-+interface.
-+
-+.SH OPTIONS
-+.TP
-+.B \-d
-+dump the raw RTAS event
-+.TP
-+.BI \-n " eventnum"
-+event number of the RTAS event being dumped
-+.TP
-+.B \-v
-+verbose, print all details, not just header
-+.TP
-+.BI \-w " width"
-+limit the output to the specified width, default width is 80 characters. The width must be > 0 and < 1024.
-+
-diff -up powerpc-utils-1.3.8/man/hcnmgr.8.me powerpc-utils-1.3.8/man/hcnmgr.8
---- powerpc-utils-1.3.8/man/hcnmgr.8.me	2021-02-08 13:18:50.115407652 +0100
-+++ powerpc-utils-1.3.8/man/hcnmgr.8	2021-02-08 13:18:43.734322981 +0100
+diff -up powerpc-utils-1.3.10/Makefile.am.than powerpc-utils-1.3.10/Makefile.am
+--- powerpc-utils-1.3.10/Makefile.am.than	2023-11-27 22:07:33.391345328 +0100
++++ powerpc-utils-1.3.10/Makefile.am	2023-11-27 22:06:38.715373360 +0100
+@@ -26,6 +26,16 @@ sbin_SCRIPTS = \
+ 	scripts/hcnmgr
+ 
+ man_MANS = \
++	man/lsdevinfo.8 \
++	man/rtas_event_decode.8 \
++	man/ls-vdev.8 \
++	man/lsprop.8 \
++	man/ls-veth.8 \
++	man/nvsetenv.8 \
++	man/ls-vscsi.8 \
++	man/pseries_platform.8 \
++	man/update_flash_nv.8 \
++	man/hcnmgr.8 \
+ 	man/activate_firmware.8 \
+ 	man/rtas_ibm_get_vpd.8 \
+ 	man/uesensor.8 \
+diff -up powerpc-utils-1.3.10/man/hcnmgr.8.than powerpc-utils-1.3.10/man/hcnmgr.8
+--- powerpc-utils-1.3.10/man/hcnmgr.8.than	2023-11-27 22:05:20.283979110 +0100
++++ powerpc-utils-1.3.10/man/hcnmgr.8	2023-11-27 22:05:20.283979110 +0100
 @@ -0,0 +1,47 @@
 +.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.6.
 +.TH HCNMGR "1" "hcnmgr contains a set of commands to support migratable SR_IOV logical port." "hcnmgr"
@@ -308,9 +69,268 @@ diff -up powerpc-utils-1.3.8/man/hcnmgr.8.me powerpc-utils-1.3.8/man/hcnmgr.8
 +was written by Mingming Cao <mingming.cao@ibm.com>.
 +.PP
 +This manual page was written by Than Ngo <than@redhat.com>.
-diff -up powerpc-utils-1.3.5/man/update_flash_nv.8.me powerpc-utils-1.3.5/man/update_flash_nv.8
---- powerpc-utils-1.3.5/man/update_flash_nv.8.me	2018-11-29 16:49:51.344987106 +0100
-+++ powerpc-utils-1.3.5/man/update_flash_nv.8	2018-11-29 16:49:42.589961458 +0100
+diff -up powerpc-utils-1.3.10/man/lsdevinfo.8.than powerpc-utils-1.3.10/man/lsdevinfo.8
+--- powerpc-utils-1.3.10/man/lsdevinfo.8.than	2023-11-27 22:05:20.282979092 +0100
++++ powerpc-utils-1.3.10/man/lsdevinfo.8	2023-11-27 22:05:20.282979092 +0100
+@@ -0,0 +1,39 @@
++.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
++.TH LSDEVINFO "8" "October 2010" "Linux" "Linux on Power Service Tools"
++.SH NAME
++lsdevinfo - information on Virtual devices
++
++.SH SYNOPSIS
++.B lsdevinfo
++[\fI-q criteria\fR] [\fI-F format\fR] [\fI-R\fR] [\fI-c\fR] [\fI-h\fR]
++
++.SH DESCRIPTION
++Provide information on Virtual devices
++.PP
++
++.SH OPTIONS
++.TP
++\fB\-q\fR criteria
++Specifies a criteria to select which devices are to be displayed.
++.TP
++\fB\-F\fR format
++Specifies the set of attributes to be displayed.
++.TP
++\fB\-R\fR
++Recursively display children of selected devices
++.TP
++\fB\-c\fR
++Display output as a comma separated list for each device.
++.TP
++\fB\-V\fR
++Display version information and exit
++.TP
++\fB\-h\fR
++Display help information and exit
++
++.SH AUTHOR
++.B lsdevinfo
++was written by Santiago Leon <sleon@ec.ibm.com>.
++.PP
++This manual page was written by Roman Rakus <rrakus@redhat.com>.
++
+diff -up powerpc-utils-1.3.10/man/lsprop.8.than powerpc-utils-1.3.10/man/lsprop.8
+--- powerpc-utils-1.3.10/man/lsprop.8.than	2023-11-27 22:05:20.283979110 +0100
++++ powerpc-utils-1.3.10/man/lsprop.8	2023-11-27 22:05:20.283979110 +0100
+@@ -0,0 +1,42 @@
++.TH LSPROP "8" "Sep 2010" "Linux" "Linux on Power Service Tools"
++.SH NAME
++lsprop \- list properties
++.SH SYNOPSIS
++.B lsprop
++.RB [ \-R ]
++.RB [ \-m
++.IR max-bytes ]
++.RB [ \-w
++.IR num-words ]
++.RI [ FILE .\|.\|.]
++.SH OVERVIEW
++.B lsprop
++program is a member of the ppc64-utils suite of utils.
++Use it to list properties
++
++.SH DESCRIPTION
++.B lsprop
++displays properties for
++.IR FILE s
++like Open Firmware
++.I .properties
++word.
++If the
++.I FILE
++is not set, the current directory is used.
++
++.SH OPTIONS
++.TP
++.B \-R
++Process recursively
++.TP
++.BI \-m " max-bytes"
++Read only first
++.I max-bytes
++bytes from the
++.IR FILE s
++.TP
++.BI \-w " num-words"
++Display up to
++.I num-words
++words per line
+diff -up powerpc-utils-1.3.10/man/ls-vdev.8.than powerpc-utils-1.3.10/man/ls-vdev.8
+--- powerpc-utils-1.3.10/man/ls-vdev.8.than	2023-11-27 22:05:20.283979110 +0100
++++ powerpc-utils-1.3.10/man/ls-vdev.8	2023-11-27 22:05:20.283979110 +0100
+@@ -0,0 +1,25 @@
++.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
++.TH LS-VDEV "8" "October 2010" "Linux" "Linux on Power Service Tools"
++.SH NAME
++ls-vdev \- information on Virtual SCSI adapters and devices
++.SH SYNOPSIS
++.BR ls-vdev " [" \-h " | " -V ]
++
++.SH DESCRIPTION
++Provide information on Virtual SCSI adapters and devices
++.PP
++
++.SH OPTIONS
++.TP
++\fB\-V\fR
++Display version information and exit
++.TP
++\fB\-h\fR
++Display help information and exit
++.PP
++
++.SH AUTHOR
++.B ls-vdev
++was written by Brian King <brking@linux.vnet.ibm.com>.
++.PP
++This manual page was written by Roman Rakus <rrakus@redhat.com>.
+diff -up powerpc-utils-1.3.10/man/ls-veth.8.than powerpc-utils-1.3.10/man/ls-veth.8
+--- powerpc-utils-1.3.10/man/ls-veth.8.than	2023-11-27 22:05:20.283979110 +0100
++++ powerpc-utils-1.3.10/man/ls-veth.8	2023-11-27 22:05:20.283979110 +0100
+@@ -0,0 +1,25 @@
++.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
++.TH LS-VETH "8" "October 2010" "Linux" "Linux on Power Service Tools"
++.SH NAME
++ls-veth \- information on Virtual Ethernet devices
++.SH SYNOPSIS
++.BR ls-veth " [" \-h " | " -V ]
++
++.SH DESCRIPTION
++Provide information on Virtual Ethernet devices
++.PP
++
++.SH OPTIONS
++.TP
++\fB\-V\fR
++Display version information and exit
++.TP
++\fB\-h\fR
++Display help information and exit
++.PP
++
++.SH AUTHOR
++.B ls-veth
++was written by Brian King <brking@linux.vnet.ibm.com>.
++.PP
++This manual page was written by Roman Rakus <rrakus@redhat.com>.
+diff -up powerpc-utils-1.3.10/man/ls-vscsi.8.than powerpc-utils-1.3.10/man/ls-vscsi.8
+--- powerpc-utils-1.3.10/man/ls-vscsi.8.than	2023-11-27 22:05:20.283979110 +0100
++++ powerpc-utils-1.3.10/man/ls-vscsi.8	2023-11-27 22:05:20.283979110 +0100
+@@ -0,0 +1,25 @@
++.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
++.TH LS-VSCSI "8" "October 2010" "Linux" "Linux on Power Service Tools"
++.SH NAME
++ls-vscsi \- information on Virtual devices
++.SH SYNOPSIS
++.BR ls-vscsi " [" \-h " | " -V ]
++
++.SH DESCRIPTION
++Provide information on Virtual devices
++.PP
++
++.SH OPTIONS
++.TP
++\fB\-V\fR
++Display version information and exit
++.TP
++\fB\-h\fR
++Display help information and exit
++.PP
++
++.SH AUTHOR
++.B ls-vscsi
++was written by Brian King <brking@linux.vnet.ibm.com>.
++.PP
++This manual page was written by Roman Rakus <rrakus@redhat.com>.
+diff -up powerpc-utils-1.3.10/man/nvsetenv.8.than powerpc-utils-1.3.10/man/nvsetenv.8
+--- powerpc-utils-1.3.10/man/nvsetenv.8.than	2023-11-27 22:05:20.283979110 +0100
++++ powerpc-utils-1.3.10/man/nvsetenv.8	2023-11-27 22:05:20.283979110 +0100
+@@ -0,0 +1,29 @@
++.TH NVSETENV "8" "Oct 2010" "Linux" "Linux on Power Service Tools"
++.SH NAME
++nvsetenv \- wrapper to invoke nvram
++
++.SH SYNOPSIS
++.B nvsetenv
++[ ARG1 ] [ ARG2 ]
++
++.SH DESCRIPTION
++.B nvsetenv
++is just a wrapper to invoke nvram
++
++.SH OPTIONS
++
++Without any argument, nvsetenv calls
++.I nvram --print-config
++
++With one argument
++.IR ARG1 ,
++nvsetenv calls
++.I nvram --print-config=ARG1
++
++With two arguments
++.IR "ARG1 ARG2" ,
++nvsetenv calls
++.I nvram --update-config ARG1=ARG2
++
++.SH "SEE ALSO"
++.IR nvram (8)
+diff -up powerpc-utils-1.3.10/man/pseries_platform.8.than powerpc-utils-1.3.10/man/pseries_platform.8
+--- powerpc-utils-1.3.10/man/pseries_platform.8.than	2023-11-27 22:05:20.282979092 +0100
++++ powerpc-utils-1.3.10/man/pseries_platform.8	2023-11-27 22:05:20.282979092 +0100
+@@ -0,0 +1,11 @@
++.\"
++.\" Copyright (C) 2015 International Business Machines
++.\"
++.TH pseries_platform 8 "September 2015" Linux "Linux on Power Service Tools"
++.SH NAME
++pseries_platform \- identify the platform and display the name of platform
++.SH SYNOPSIS
++.B /usr/bin/pseries_platform
++
++.SH DESCRIPTION
++The \fIpseries_platform\fR tool can identify the platform and display the name of platform.
+diff -up powerpc-utils-1.3.10/man/rtas_event_decode.8.than powerpc-utils-1.3.10/man/rtas_event_decode.8
+--- powerpc-utils-1.3.10/man/rtas_event_decode.8.than	2023-11-27 22:05:20.283979110 +0100
++++ powerpc-utils-1.3.10/man/rtas_event_decode.8	2023-11-27 22:05:20.283979110 +0100
+@@ -0,0 +1,31 @@
++.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.36.
++.TH RTAS_EVENT_DECODE 8 "September 2010" "Linux" "Linux on Power Service Tools"
++.SH NAME
++\fBrtas_event_decode\fP - RTAS message decoder
++.SH SYNOPSIS
++.B rtas_event_decode
++[\fI-dv\fR] [\fI-n eventnum\fR] [\fI-w width\fR]
++.SH DESCRIPTION
++RTAS messages are placed in the syslog encoded in a binary
++format, and are unreadable.  This tool will take exactly one
++message, parse it, and spit out the human-readable equivalent.
++This program expects ascii data on stdin.
++
++This tool is mostly meant to be used in conjuction with the
++rtas_dump shell script, which provides a suitable user 
++interface.
++
++.SH OPTIONS
++.TP
++.B \-d
++dump the raw RTAS event
++.TP
++.BI \-n " eventnum"
++event number of the RTAS event being dumped
++.TP
++.B \-v
++verbose, print all details, not just header
++.TP
++.BI \-w " width"
++limit the output to the specified width, default width is 80 characters. The width must be > 0 and < 1024.
++
+diff -up powerpc-utils-1.3.10/man/update_flash_nv.8.than powerpc-utils-1.3.10/man/update_flash_nv.8
+--- powerpc-utils-1.3.10/man/update_flash_nv.8.than	2023-11-27 22:05:20.283979110 +0100
++++ powerpc-utils-1.3.10/man/update_flash_nv.8	2023-11-27 22:05:20.283979110 +0100
 @@ -0,0 +1,15 @@
 +.\"
 +.\" Copyright (C) 2015 International Business Machines
@@ -327,25 +347,3 @@ diff -up powerpc-utils-1.3.5/man/update_flash_nv.8.me powerpc-utils-1.3.5/man/up
 +.SH SEE ALSO
 +update_flash(8).
 +
-diff -up powerpc-utils-1.3.10/Makefile.am.me powerpc-utils-1.3.10/Makefile.am
---- powerpc-utils-1.3.10/Makefile.am.me	2022-06-03 12:35:01.335312481 +0200
-+++ powerpc-utils-1.3.10/Makefile.am	2022-06-03 12:46:42.460763120 +0200
-@@ -48,7 +48,17 @@ man_MANS = \
- 	man/vcpustat.8 \
- 	man/rtas_dbg.8 \
- 	man/drmgr.8 \
--	man/lparnumascore.8
-+	man/lparnumascore.8 \
-+	man/lsdevinfo.8 \
-+	man/rtas_event_decode.8 \
-+	man/ls-vdev.8 \
-+	man/lsprop.8 \
-+	man/ls-veth.8 \
-+	man/nvsetenv.8 \
-+	man/ls-vscsi.8 \
-+	man/pseries_platform.8 \
-+	man/update_flash_nv.8 \
-+	man/hcnmgr.8
- 
- EXTRA_DIST += $(bin_SCRIPTS) $(sbin_SCRIPTS) $(man_MANS)
- 

powerpc-utils-fix-return-value-from-do_replace.patch

@@ -0,0 +1,31 @@
+commit 3a8127ad7fe6615a8c6e8a3f0965addfdf888b38
+Author: Haren Myneni <haren@linux.ibm.com>
+Date:   Fri Feb 14 21:43:33 2025 -0800
+
+    drmgr/pci: Return 0 for success from do_replace()
+    
+    Added replace_add_work() in commit f40a63b15c563 to support
+    replacement node and the partner node. But this function returns
+    0 for user input and 1 for success which caused do_replace()
+    returns 1. This patch fixes the problem with return 0.
+    
+    Fixes: f40a63b15c563 ("drmgr/pci: Add multipath partner device support for hotplug replace")
+    Signed-off-by: Haren Myneni <haren@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/src/drmgr/drslot_chrp_pci.c b/src/drmgr/drslot_chrp_pci.c
+index 4c41fcd..91c08e9 100644
+--- a/src/drmgr/drslot_chrp_pci.c
++++ b/src/drmgr/drslot_chrp_pci.c
+@@ -1051,9 +1051,10 @@ static int do_replace(struct dr_node *all_nodes)
+ 		}
+ 
+ 		usr_prompt = prompt_save;
++		return rc;
+ 	}
+ 
+-	return rc;
++	return 0;
+ }
+ 
+ int valid_pci_options(void)

powerpc-utils-lparstat-print-memory-mode-correctly.patch

@@ -0,0 +1,47 @@
+commit 4443a68d523043d69195e5a5a27fb9fc7ae8c50f
+Author: Shrikanth Hegde <sshegde@linux.ibm.com>
+Date:   Mon Mar 10 22:29:16 2025 +0530
+
+    lparstat: print memory mode correctly (revised)
+    
+    Starting from power10, active memory sharing(AMS) is not supported.
+    So from power10 onwards the H_GET_MPP hcall fails and hence
+    corresponding fields in lparcfg are not populated, such as
+    entitled_memory_pool_number etc.
+    
+    Use HWCAP mechanism and print memory model as dedicated for power10
+    onwards.
+    
+    Suggested-by: Peter Bergner <bergner@linux.ibm.com>
+    Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
+    Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
+
+diff --git a/src/lparstat.c b/src/lparstat.c
+index db22316..8eddd7c 100644
+--- a/src/lparstat.c
++++ b/src/lparstat.c
+@@ -37,6 +37,11 @@
+ #include "pseries_platform.h"
+ #include "cpu_info_helpers.h"
+ #include <time.h>
++#include <sys/auxv.h>
++
++#ifndef PPC_FEATURE2_ARCH_3_1
++#define PPC_FEATURE2_ARCH_3_1 0x00040000
++#endif
+ 
+ #define LPARCFG_FILE	"/proc/ppc64/lparcfg"
+ #define SE_NOT_FOUND	"???"
+@@ -794,7 +799,11 @@ void get_memory_mode(struct sysentry *se, char *buf)
+ 	struct sysentry *tmp;
+ 
+ 	tmp = get_sysentry("entitled_memory_pool_number");
+-	if (atoi(tmp->value) == 65535)
++	/*
++	 * from power10 onwards Active Memory Sharing(AMS) is not
++	 * supported. Hence always display it as dedicated for those
++	 */
++	if (atoi(tmp->value) == 65535 || (getauxval(AT_HWCAP2) & PPC_FEATURE2_ARCH_3_1))
+ 		sprintf(buf, "Dedicated");
+ 	else
+ 		sprintf(buf, "Shared");

powerpc-utils.spec

@@ -1,28 +1,18 @@
 Name: powerpc-utils
-Version: 1.3.10
-Release: 6%{?dist}
+Version: 1.3.13
+Release: 2%{?dist}
 Summary: PERL-based scripts for maintaining and servicing PowerPC systems
 
-Group: System Environment/Base
 License: GPLv2
 URL: https://github.com/ibm-power-utilities/powerpc-utils
 Source0: https://github.com/ibm-power-utilities/%{name}/archive/v%{version}/%{name}-%{version}.tar.gz
 Source1: nx-gzip.udev
 Patch0: powerpc-utils-1.3.10-manpages.patch
-Patch1: powerpc-utils-1.3.10-distro.patch
-# bz#2121470, Fix lsslot -c mem output when using 4GB LMB size
-Patch3: powerpc-utils-b1b9e7-LMB_size_4GB.patch
-Patch4: powerpc-utils-e1f1de-lmb_address_in_hexadecimal.patch
-Patch5: powerpc-utils-fix_setting_primary_slave_across_reboots.patch
-Patch6: powerpc-utils-f4c2b0-fix_display_of_mode_for_dedicated_donating_partition.patch
-
-# lparstat: Fix-negative-values-seen-while-running-lpar
-Patch10: powerpc-utils-1.3.10-lparstat-Fix-negative-values-seen-while-running-lpar.patch
-# report-mixed-SMT-state
-Patch11: powerpc-utils-1.3.10-lparstat-report-mixed-SMT-state.patch
-# Fix-offline-threads-uninitialized-entries
-Patch12: powerpc-utils-1.3.10-lparstat-Fix-offline-threads-uninitialized-entries.patch
 
+# upstream patches
+Patch10: powerpc-utils-fix-return-value-from-do_replace.patch
+Patch11: powerpc-utils-lparstat-print-memory-mode-correctly.patch
+ 
 ExclusiveArch: ppc %{power64}
 
 BuildRequires: gcc
@@ -51,13 +41,20 @@ Requires(preun): systemd
 Requires(postun): systemd
 Requires: kmod
 Requires: which
-Requires: gawk
-Requires: bc
-Requires: findutils
-Requires: grep
-Requires: sed
-Requires: systemd-udev
-Requires: coreutils
+Requires: /usr/bin/awk
+Requires: /usr/bin/basename
+Requires: /usr/bin/bc
+Requires: /usr/bin/cat
+Requires: /usr/bin/cut
+Requires: /usr/bin/echo
+Requires: /usr/bin/find
+Requires: /bin/grep
+Requires: /usr/bin/head
+Requires: /usr/bin/ls
+Requires: /usr/bin/sed
+Requires: /usr/bin/tr
+Requires: /usr/bin/udevadm
+
 
 %description core
 Core utilities for maintaining and servicing PowerPC systems.
@@ -66,12 +63,10 @@ Core utilities for maintaining and servicing PowerPC systems.
 %prep
 %autosetup -p1
 
-
 %build
-export CFLAGS="$RPM_OPT_FLAGS -fno-strict-aliasing"
 ./autogen.sh
 %configure --with-systemd=%{_unitdir} --disable-werror
-make %{?_smp_mflags}
+make %{?_smp_mflags} V=1
 
 
 %install
@@ -87,7 +82,7 @@ rm -rf $RPM_BUILD_ROOT/usr/share/doc/packages/powerpc-utils
 rm -f $RPM_BUILD_ROOT%{_pkgdocdir}/COPYING
 
 # install udev rule for the nx-gzip accelerator
-install -pDm 644 %{SOURCE1} %{buildroot}%{_udevrulesdir}/90-nx-gzip.rules
+install -pDm 644  %{SOURCE1}  %{buildroot}%{_udevrulesdir}/90-nx-gzip.rules
 
 # remove init script and perl script. They are deprecated
 rm -rf $RPM_BUILD_ROOT/etc/init.d/ibmvscsis.sh $RPM_BUILD_ROOT/usr/sbin/vscsisadmin
@@ -102,6 +97,16 @@ ln -s serv_config.8 %{buildroot}%{_mandir}/man8/uspchrp.8
 # deprecated, use sosreport instead
 rm -f $RPM_BUILD_ROOT%{_sbindir}/snap $RPM_BUILD_ROOT%{_mandir}/man8/snap.8*
 
+# add hierachy /etc/drmgr.d/pmig
+mkdir -p $RPM_BUILD_ROOT/etc/drmgr.d/pmig
+
+# drop needless stuffs
+rm -rf $RPM_BUILD_ROOT%{_prefix}/lib/powerpc-utils \
+       $RPM_BUILD_ROOT%{_unitdir}/hcn-init-wicked.service
+
+# keep service name
+mv $RPM_BUILD_ROOT%{_unitdir}/hcn-init-NetworkManager.service $RPM_BUILD_ROOT%{_unitdir}/hcn-init.service
+
 %post core
 %systemd_post hcn-init.service
 # update the smt.state file with current SMT
@@ -127,9 +132,11 @@ systemctl enable hcn-init.service >/dev/null 2>&1 || :
 %{_mandir}/man8/rtas_dump.8*
 
 %files core
+%doc README Changelog
 %license COPYING
 %dir %{_localstatedir}/lib/powerpc-utils
-%config(noreplace) %{_localstatedir}/lib/powerpc-utils/smt.state
+%dir /etc/drmgr.d/pmig
+%verify(not md5 size mtime) %config(noreplace) %{_localstatedir}/lib/powerpc-utils/smt.state
 %{_unitdir}/smtstate.service
 %{_unitdir}/smt_off.service
 %{_unitdir}/hcn-init.service
@@ -201,123 +208,166 @@ systemctl enable hcn-init.service >/dev/null 2>&1 || :
 %{_mandir}/man8/nvram.8*
 %{_mandir}/man8/ofpathname.8*
 %{_mandir}/man8/drmgr.8*
+%{_mandir}/man8/drmgr-hooks.8*
 %{_mandir}/man8/lparnumascore.8*
 
+
 %changelog
-* Wed Jul 26 2023 Than Ngo <than@redhat.com> - 1.3.10-6
+* Tue Mar 11 2025 Than Ngo <than@redhat.com> - 1.3.13-2
+- Resolves: RHEL-80729, drmgr: return correct value
+- Resolves: RHEL-80277, lparstat: print memory mode correctly
+
+* Tue Dec 03 2024 Than Ngo <than@redhat.com> - 1.3.13-1
+- Resolves: RHEL-30880, multipath - drmgr support
+- Resolces: RHEL-61089, lparstat -E Fails to Display Correct Values for %Busy and %Idle States
+
+* Sat Jun 29 2024 Than Ngo <than@redhat.com> - 1.3.10-11
+- Resolves: RHEL-23620, nvram help page and man page are not in sync
+- Resolves: RHEL-23619, segault when running nvram --nvram-size 268435456
+- Resolves: RHEL-23624, segault when running nvram --print-config
+
+* Tue Jan 30 2024 Than Ngo <than@redhat.com> - 1.3.10-10
+- Resolves: RHEL-22830, Support multiple dev paths for a nvme boot device
+
+* Wed Jan 10 2024 Than Ngo <than@redhat.com> - 1.3.10-9
+- Resolves: RHEL-20350, getting larger Negative value while running rtas_dbg -l
+- Resolves: RHEL-19076, installation fails if nsid of nvme device is greater than 10
+- Resolves: RHEL-11456, add new /etc/drmgr.d/pmig hierarchy
+
+* Mon Nov 27 2023 Than Ngo <than@redhat.com> - 1.3.10-8
+- Resolves: RHEL-16045, Support partial SMT level through SYS FS smt/control files
+- Resolves: RHEL-11456, LPM hooks
+ 
+* Wed Jul 26 2023 Than Ngo <than@redhat.com> - 1.3.10-7
 - Fix negative values seen while running lpar
 - Fix lparstat error with mixed SMT state
-Resolves: #2225135
+Resolves: #2225371
 
-* Sat Jun 17 2023 Than Ngo <than@redhat.com> - 1.3.10-5
-- Resolves: #2207649, Add udev rule for the nx-gzip in to the core subpackage
+* Wed May 10 2023 Than Ngo <than@redhat.com> - 1.3.10-6
+- Resolves: #2166870, lparstat: Fix display of mode for dedicated-donating partition
+- Resolves: #2169269, lparstat: Fix negative values seen while running lparstat with -E option
 
-* Tue Apr 25 2023 Than Ngo <than@redhat.com> - 1.3.10-4
-- Resolves: #2166871, lparstat showing incorrect mode in a dedicated-donating LPAR
+* Mon Dec 12 2022 Than Ngo <than@redhat.com> - 1.3.10-5
+- Resolves: #2125152, HNV bond fails to come up with sriov interface as active slave
 
-* Mon Nov 28 2022 Than Ngo <than@redhat.com> - 1.3.10-3
-- Resolves: #2148878, HNV bond fails to come up with sriov interface as active slave
+* Thu Dec 08 2022 Than Ngo <than@redhat.com> - 1.3.10-4
+- Resolves: #2150698, handle nsid of nvmf device as hexadecimal number
+- Resolves: #2150697, setup multiple device path for a nvmf boot device
 
-* Fri Oct 21 2022 Than Ngo <than@redhat.com> - 1.3.10-2
-- Resolves: #2121481, Fix lsslot -c mem output when using 4GB LMB size
+* Thu Nov 03 2022 Than Ngo <than@redhat.com> - 1.3.10-3
+- Resolves: #2111991, Add udev rule for the nx-gzip in to the core subpackage
+- Resolves: #2121470, Fix lsslot -c mem output when using 4GB LMB size
+- Resolves: #2110129, Add NVMf-FC boot support for Power
+
+* Mon Jun 06 2022 Than Ngo <than@redhat.com> - 1.3.10-2
+- Related: #2089106, install smt.state as config file 
 
 * Mon Jun 06 2022 Than Ngo <than@redhat.com> - 1.3.10-1
-- Resolves: #2051330, Linux Hybrid Network Virtualization update
-- Resolves: #2083469, smtstate --save command failed 
+- Resolves: #1920964, P10 Power Mode Reporting
+- Resolves: #2050893, Linux Hybrid Network Virtualizatio
+- Resolves: #2065169, bootloader fails to update boot order after OS install
+- Resolves: #2071862, Fix NM HNV setting primary slave
+- Resolves: #2089106, smtstate --save command failed
 
-* Fri May 13 2022 Than Ngo <than@redhat.com> - 1.3.9-3
-- Resolves: #2059459, add new DRC type description strings for latest PCIe slot types 
-- Resolves: #2078514, Fix NM HNV setting primary slave
-- Resolves: #2083469, smtstate test failed as smtstate --save command failed
+* Fri Jan 14 2022 Than Ngo <than@redhat.com> - 1.3.9-6
+- Resolves: #2039201, santize devspec output of a newline if one is present
 
-* Thu Dec 09 2021 Than Ngo <than@redhat.com> - 1.3.9-1
-- Resolves: #2028690, rebase to 1.3.9
+* Tue Dec 07 2021 Than Ngo <than@redhat.com> - 1.3.9-5
+- Resolves: #2024038 - HNV interface fails to configure when added in lpar shutdown state
 
-* Thu Dec 02 2021 Than Ngo <than@redhat.com> - 1.3.8-10
-- Related: #2022225, increase release
+* Thu Nov 11 2021 Than Ngo <than@redhat.com> - 1.3.9-4
+- enable support vnic as backend for HNV interface
+- fixed hexdump format
+  Resolves: #2022235
 
-* Thu Nov 11 2021 Than Ngo <than@redhat.com> - 1.3.8-9
-- Resolves: #2022225, enable support vnic as backend for HNV interfaces 
+* Wed Oct 20 2021 Than Ngo <than@redhat.com> - 1.3.9-3
+- Resolves: #2014916, marked smt.state as %%ghost
 
-* Thu Oct 07 2021 Than Ngo <than@redhat.com> - 1.3.8-8
-- lsdevinfo: optimize criteria filtering
+* Tue Aug 10 2021 Mohan Boddu <mboddu@redhat.com> - 1.3.9-2
+- Rebuilt for IMA sigs, glibc 2.34, aarch64 flags
+  Related: rhbz#1991688
 
-* Fri Jul 16 2021 Than Ngo <than@redhat.com> - 1.3.8-7
-- Related: #1938420, Fix checking HCNID array size at boot time
+* Mon Jul 19 2021 Than Ngo <than@redhat.com> - 1.3.9-1
+- Resolves: #1873868, rebase to 1.3.9
 
-* Thu Apr 01 2021 Than Ngo <than@redhat.com> - 1.3.8-6
-- Resolves: #1935658, New lparstat -x option to report the security flavor
-- Resolves: #1953818, Use od instead xxd
-- Resolves: #1938420, rebase patch fix_boot-time_bonding_interface_cleanup_and_avoid_use_ifcfg 
-- Resolves: #1940358, ppc64_cpu --help does not list --version as an option 
-- Resolves: #1951068, take care of NUMA topology when removing memory (DLPAR)
+* Fri Jun 11 2021 Than Ngo <than@redhat.com> - 1.3.8-9
+- Resolves: #1937038, New lparstat -x option to report the security flavor
+- Use od instead xxd
+- rebase patch fix_boot-time_bonding_interface_cleanup_and_avoid_use_ifcfg
+- ppc64_cpu --help does not list --version as an option
+- take care of NUMA topology when removing memory (DLPAR)
 
-* Wed Feb 03 2021 Than Ngo <than@redhat.com> - 1.3.8-5
-- Resolves: #1924150, Fix boot-time bonding interface cleanup and avoid use ifcfg
+* Fri Apr 16 2021 Mohan Boddu <mboddu@redhat.com> - 1.3.8-8
+- Rebuilt for RHEL 9 BETA on Apr 15th 2021. Related: rhbz#1947937
 
-* Mon Dec 21 2020 Than Ngo <than@redhat.com> - 1.3.8-4
-- Resolves: #1909526, additional patches to support Linux Hybrid Network Virtualization
-- Resolves: #1909135, move commands that dont depend on perl to core subpackage
+* Mon Feb 08 2021 Than Ngo <than@redhat.com> - 1.3.8-7
+- updated hcnmgr manpage
 
-* Tue Oct 06 2020 Than Ngo <than@redhat.com> - 1.3.8-3
-- Resolves: #1868474, ofpathname: Use NVMe controller physical nsid
-- Resolves: #1885532, sys_ident: Skip length field from search
+* Mon Feb 08 2021 Than Ngo <than@redhat.com> - 1.3.8-6
+- Fix boot-time bonding interface cleanup and avoid use ifcfg
+
+* Wed Jan 27 2021 Fedora Release Engineering <releng@fedoraproject.org> - 1.3.8-5
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_34_Mass_Rebuild
+
+* Tue Dec 22 2020 Than Ngo <than@redhat.com> - 1.3.8-4
+- additional patches to support Linux Hybrid Network Virtualization
+- move commands that dont depend on perl to core subpackage
+- update hcnmgr patch
+- sys_ident: Skip length field from search
+- ofpathname: Use NVMe controller physical nsid
+
+* Thu Oct 01 2020 Than Ngo <than@redhat.com> - 1.3.8-3
+- add hcnmgr man page
 
 * Thu Oct 01 2020 Than Ngo <than@redhat.com> - 1.3.8-2
-- Related: #1853297, add missing hcnmgr manpage and Req on which
+- clean up systemd service 
 
-* Thu Oct 01 2020 Than Ngo <than@redhat.com> - 1.3.8-1
-- Resolves: #1853297, rebase to 1.3.8
-- Resolves: #1802181, SR-IOV - Linux Hybrid Network Virtualization
-- Resolves: #1844421, Include vcpustat
+* Fri Sep 04 2020 Than Ngo <than@redhat.com> - 1.3.8-1
+- update to 1.3.8
 
-* Wed Jun 24 2020 Than Ngo <than@redhat.com> - 1.3.6-11
-- Resolves: #1847604, ofpathname: failed to boot
+* Tue Jul 28 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.3.7-7
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_33_Mass_Rebuild
 
-* Fri Jun 19 2020 Than Ngo <than@redhat.com> - 1.3.6-10
-- Resolves: #1848839, update lparstat man page with -E option
+* Thu Jul 09 2020 Than Ngo <than@redhat.com> - 1.3.7-6
+- Track and expose idle PURR and SPURR ticks
+- ofpathname: speed up l2of_scsi()
+- ofpathname: failed to boot
+- update lparstat man page with -E option
+- enable support for ibm,drc-info property
 
-* Fri May 22 2020 Than Ngo <than@redhat.com> - 1.3.6-9
-- Resolves: #1837751, ofpathname: speed up l2of_scsi()
+* Sat Mar 28 2020 Than Ngo <than@redhat.com> - 1.3.7-5
+- move drmgr in core to avoid pulling in Perl
 
-* Fri May 15 2020 Than Ngo <than@redhat.com> - 1.3.6-8
-- Related: #1783285, update the patches V4
+* Mon Mar 09 2020 Than Ngo <than@redhat.com> - 1.3.7-4
+- update_flash_nv: fixup null byte command substitution warning
+- drmgr: Fix segfault when running 'drmgr -c pmig -h'
 
-* Wed May 13 2020 Than Ngo <than@redhat.com> - 1.3.6-7
-- Resolves: #1783285, Track and expose idle PURR and SPURR ticks
+* Thu Jan 30 2020 Fedora Release Engineering <releng@fedoraproject.org> - 1.3.7-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_32_Mass_Rebuild
 
-* Wed Mar 25 2020 Than Ngo <than@redhat.com> - 1.3.6-6
-- Resolves: #1819566 - move drmgr in core to avoid pulling in Perl
-- Resolves: #1806870 - ignored null byte in input 
-- Resolves: #1779197 - enable support for ibm,drc-info property
+* Thu Dec 19 2019 Than Ngo <than@redhat.com> - 1.3.7-2
+- add systemd service to set default system SMT mode
 
-* Wed Dec 04 2019 Than Ngo <than@redhat.com> - 1.3.6-5
-- Resolves: #1779257, Safe bootlist update
+* Wed Dec 18 2019 Than Ngo <than@redhat.com> - 1.3.7-1
+- update to 1.3.7 
 
-* Wed Jul 24 2019 Than Ngo <than@redhat.com> - 1.3.6-4
-- Resolves: #1719372 - wrong disk gets booted after installation
+* Fri Jul 26 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1.3.6-3
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_31_Mass_Rebuild
 
-* Fri Jun 07 2019 Than Ngo <than@redhat.com> - 1.3.6-3
-- Resolves: #1718254, improve handling of errors from subsidiary scripts
+* Sat Feb 02 2019 Fedora Release Engineering <releng@fedoraproject.org> - 1.3.6-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_30_Mass_Rebuild
 
-* Wed Jun 05 2019 Than Ngo <than@redhat.com> - 1.3.6-2
-- Resolves: #1716425, lparstat and update_flash fixes
+* Wed Jan 16 2019 Than Ngo <than@redhat.com> - 1.3.6-1
+- update to 1.3.6
 
-* Mon Apr 01 2019 Than Ngo <than@redhat.com> - 1.3.6-1
-- Resolves: #1666618, rebase to 1.3.6
+* Fri Nov 30 2018 Than Ngo <than@redhat.com> - 1.3.5-4
+- install missing pseries_platform and update_flash_nv man pages
 
-* Tue Dec 04 2018 Than Ngo <than@redhat.com> - 1.3.5-5
-- Related: #1655903, add missing man pages
+* Thu Nov 29 2018 Than Ngo <than@redhat.com> - 1.3.5-3
+- added pseries_platform and update_flash_nv man pages
 
-* Tue Dec 04 2018 Than Ngo <than@redhat.com> - 1.3.5-4
-- Resolves: #1655903, lsslot -c mem is not displaying any information
-
-* Tue Nov 27 2018 Than Ngo <than@redhat.com> - 1.3.5-3
-- Resolves: #1653621, fix to display logical name using bootlist -o option
-
-* Sat Nov 10 2018 Than Ngo <than@redhat.com> - 1.3.5-2
-- fix metadate issue detected by rpmdiff
-  Related: #1608172
+* Fri Jul 13 2018 Fedora Release Engineering <releng@fedoraproject.org> - 1.3.5-2
+- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
 
 * Mon Jun 18 2018 Dan Horák <dan[at]danny.cz> - 1.3.5-1
 - Rebased to 1.3.5

sources

@@ -0,0 +1 @@
+SHA512 (powerpc-utils-1.3.13.tar.gz) = 81fe5588e7330cb0bac81b7106c9949e364fe0b11cc1739a4074fee54c01c363ed8af05488152c9527c56ba053c11278c6b1a2340b2e088a6f25521965e4fc62